I am doing a poll as well for all the protective case. Feel free to choose your best Note 9 case.
1) Note 9 UAG Plasma Ash
Back
Military design and the combination of rubber & polycarbonate. There are 5 rubber type of screws which I think is just the design of the case. The four corners are slightly bigger, so there will be a small gap between the surface and the back of the case which to avoid being scratch. Besides, the 4 corners will be heavier, therefore when you drop your phone , the gravity force will caused the phone to drop at the corner so that your screen will be safe. Besides, there is a slanting design for the fingerprint sensor area which I bet will make you easier to reach & feel the sensor. The Plasma Ash if blended nicely with the Black Panther Note 9.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Inner
There is honeycomb pattern for the inner part of the case which I suppose it is for shock absorb.
Top & Bottom
Ports and button cutout is perfect.
Side & Raise
There will a raise near the top & the bottom of the case which will protect your phone when you drop it. Button feedback is good while the case is grippy too. It's feel good in the hand!
Overall is a good quality case and I highly recommended to those who wish to worry-free about their mightly Note 9. I will rate this case 9.5/10.
2) RhinoShield Solid Suit (Carbon Fibre series)
All the cutouts are perfectly aligned. Home button, volume buttons & Bixby button are clicky but not as tactile as UAG case. Access of SPEN is easy, however you are require to use your finger to poke the cutout in order for you to get the SPEN. I love the carbon fibre textures at the back of the case which give you the premium look of your phone. I will say the case feel really good in my hand with little grippy feel and they use minor rough matte finish for both side of the case. There are honeycomb pattern inside the phone which it suppose to absorb the force when you drop your phone.
Overall is a great case with premium look. Besides, it has military standard drop test 'checked' so you should not worry about the protection. There are lips which cover the top & bottom of the front screen which will protect your phone well if you drop your phone front face. Definitely a major-go for the case. This case definitely deserve the rate 9.5/10. Below are all the photos :
3) RhinoShield CrashGuard
This is a well-known bumper case for it's great protection with minimal bulky. All the cutouts are perfectly aligned. Buttons are clicky, in fact the home button even have better tactile feeling compare with SolidSuit Series. SPEN access same with SolidSuit. There are lips at the top and the bottom of the case either back and front which helps to protect your phone when you drop your phone in either direction.
There is a free back protector come with the case. Got my Camo Dbrand Skin, it just fit perfectly to the case. It's going to be my best combo so far balance in between beauty and protection. This case definitely for people who wish to have a protective case while showing off the back and thinnest of your phone. The side of the case using the rough matte finish too which gave you grippy feel. Overall, I will rate this case 9/10. You can refer all the photos as below:
4) Supcase UB Style
This is a hybrid case between TPU & Polycarbonate which also have military drop standard. It has a clear plastic back which allow you to show off your phone without compromise the drop protection. All the cutouts are perfectly aligned and buttons are clicky too. However, I am dislike the flat buttons design which sometimes causing me hard to locate the buttons especially for a big long phone like Note 9. As usual, there will be minor rainbow effect at the back if you are not using any skin or back protector. SPen cutouts is easy to access.
There are lips at the bottom and top of your phone which protect your phone when drop it face down. However, this case is as slippery as soap. The side finishing is smooth TPU which makes the case extremely slippery if you tend to sweat a lot. Overall, I will rate this case 7.5/10.
Check out all the photos below:
Conclusion
1) Ultimate Protection with Unique Look = UAG Plasma Ash
2) Great Protection with Premium Look = Rhinoshield SolidSuit
3) Great Protection with Sleek Look = Rhinoshield CrashGuard (personal preference)
Why are you posting a review of a case without a phone to test with? Saying things like the port cutouts are good and accurate? You can't possibly know this before having the device in-hand to test the fitment. This is premature.
Hope they come out with more colors, great cases.
Nice, did UAG ship it from Hong Kong or the US?
Is that thing bowed like a banana ?
felloffthetruck said:
Nice, did UAG ship it from Hong Kong or the US?
Is that thing bowed like a banana ?
Click to expand...
Click to collapse
For International purchase, it will ship from HK Warehouse. For US purchase it will ship from US Warehouse. You can get the info from the below link : https://urbanarmorgear.com/pages/shipping-information
By the way, what you mean that "bowed like a banana"? haha
allklrnoflr said:
Hope they come out with more colors, great cases.
Click to expand...
Click to collapse
Hope so too. Normally the only the "Fruit" phone will get more colors & series.
disturbd1 said:
Why are you posting a review of a case without a phone to test with? Saying things like the port cutouts are good and accurate? You can't possibly know this before having the device in-hand to test the fitment. This is premature.
Click to expand...
Click to collapse
Yeah bro. I had edited my post. Will update the review again once I got the phone in hand.
lvoonjian8888 said:
For International purchase, it will ship from HK Warehouse. For US purchase it will ship from US Warehouse. You can get the info from the below link : https://urbanarmorgear.com/pages/shipping-information
By the way, what you mean that "bowed like a banana"? haha
Click to expand...
Click to collapse
Bowed like a banana = does not lay flat, curved. Looks like that in your picture.
felloffthetruck said:
Bowed like a banana = does not lay flat, curved. Looks like that in your picture.
Click to expand...
Click to collapse
Nope, that case did lay flat. Will update the post again once I got the phone.
Love UAG. Sad they seem to have discontinued the Pathfinder series. Now it's only the plyo, plasma and the premium monarch lines.
Love the white and black stormtrooper pathfinder on my S8+ and iPhone X.
twisted_mind said:
Love UAG. Sad they seem to have discontinued the Pathfinder series. Now it's only the plyo, plasma and the premium monarch lines.
Love the white and black stormtrooper pathfinder on my S8+ and iPhone X.
Click to expand...
Click to collapse
Maybe they will release it later on because S9 & S9+ got the Pathfinder series too
lvoonjian8888 said:
Maybe they will release it later on because S9 & S9+ got the Pathfinder series too
Click to expand...
Click to collapse
Sure hope this series lives on. It just looks so cool not to mention damn new pristine even after a year.
Here in India the Pathfinder never made it for the S9 hence I assumed it's gone for good. Not a fan of the plasma or the new plyo. The monarch not only is expensive but looks hefty.
I ordered the Monarch today.
Got the red monarch today from best buy. Now just need the Note.
Sent from my SM-N950U using Tapatalk
drmacrofish said:
Got the red monarch today from best buy. Now just need the Note.
Sent from my SM-N950U using Tapatalk
Click to expand...
Click to collapse
jbanks9251 said:
I ordered the Monarch today.
Click to expand...
Click to collapse
Let me know how was the weight for the Monarch case. Scare it will make the Note 9 heavier.
Got in the black Monarch today.
lvoonjian8888 said:
Let me know how was the weight for the Monarch case. Scare it will make the Note 9 heavier.
Click to expand...
Click to collapse
Case should be here tomorrow, but the phone won't be.
jbanks9251 said:
Case should be here tomorrow, but the phone won't be.
Click to expand...
Click to collapse
My monarch case came early, so but I had the phone without the case for about 4 hours. Feels similar in weight to the plasma case, maybe a tad bit heavier. Doesn't really add a noticeable additional weight but the grips are nice.
sinofmercy said:
My monarch case came early, so but I had the phone without the case for about 4 hours. Feels similar in weight to the plasma case, maybe a tad bit heavier. Doesn't really add a noticeable additional weight but the grips are nice.
Click to expand...
Click to collapse
Great to hear that! Do you mind to share some photos?
Guys, check it out my final review for UAG Plasma Ash case. Just got my Black Note 9 yesterday.
Related
Hey guys,
Got a poll up and looking for feedback on what you guys think of these cases. They are all similar to each other in the sense that they have a plastic outer shell with a soft hybrid inner shell. All of them come in white and they range from $25-35 dollars. Personally I'm between the Spigen and Speck but I wanted to throw in the otterbox as another option. If you guys have something else in mind also let me know.
Thanks for the feedback guys,
JD
1) Spigen Slim Armor - $25 (Really love the price and i believe the speak grill is raised to allow for better sound transfer, not 100% sure)
2) Speck Candyshell - $35
3) Otterbox Commuter - $35
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[/URL]
Forgot to mention, that they all have rubber at certain points on them so if anyone has used these, how are they with pocket lint?
I'll have a review of the Speck Candyshell up later today. I have both the Candyshell and Candyshell Grip.
Here's my review of the Slim Armor: http://forum.xda-developers.com/showthread.php?t=2262605
All three are very nice cases. The Otterbox and Candyshell offer the best protection. The lip on the Slim Armor is very low, but the trade off is the case is very slim. Personally, I would get the Candyshell or Slim Armor. The Otterbox is very durable though, and if you need the absolute best protection, get it.
AndroidFanNetwork said:
I'll have a review of the Speck Candyshell up later today. I have both the Candyshell and Candyshell Grip.
Here's my review of the Slim Armor: http://forum.xda-developers.com/showthread.php?t=2262605
Click to expand...
Click to collapse
Thanks, i'll be sure to check them out.
hinduboy74 said:
Thanks, i'll be sure to check them out.
Click to expand...
Click to collapse
Oops, I added some more info to my other post
Is the speaker grill on the slim armor raised to allow it to sound good even when placed with the screen up?
hinduboy74 said:
Is the speaker grill on the slim armor raised to allow it to sound good even when placed with the screen up?
Click to expand...
Click to collapse
It's pretty flush. I attached a few pictures that should show the grill and how the phone lies.
AndroidFanNetwork said:
... The lip on the Slim Armor is very low...
Click to expand...
Click to collapse
Spigen are #### ing idiots!
They could have easily made the lip a little larger for better front protection but noooooooooooo.
They probably just made the case like that to try and squeeze more money out of customers to buy their screen protectors as well
Spigen doesn't deserve any of our money for this greedy design flaw!
That was disappointing to find that out, i'm probably leaning towards the speck case now.
The Spigen Slim Armor, slim cases look the best. Personally i'm going commando with mine. I just can't put my phone in a case it makes it look worse and i like it look and be thin. It fits my pocket better. But if your a builder or trades working. I good case is a must..
ap3604 said:
Spigen are #### ing idiots!
They could have easily made the lip a little larger for better front protection but noooooooooooo.
They probably just made the case like that to try and squeeze more money out of customers to buy their screen protectors as well
Spigen doesn't deserve any of our money for this greedy design flaw!
Click to expand...
Click to collapse
As I mentioned in the other thread you posted this in, it's called the "Slim Armor" for a reason. It isn't meant to be a bulky, full protection case.
AndroidFanNetwork said:
As I mentioned in the other thread you posted this in, it's called the "Slim Armor" for a reason. It isn't meant to be a bulky, full protection case.
Click to expand...
Click to collapse
And I'll respond to both in kind: If your case has the word "armor" in it... then it should be able to protect the screen from smashing if its dropped
A little bit more lip would have completely taken care of this problem and allowed it to maintain it's slimness.
They definitely won't get a dime from me, as I will be returning mine, and I encourage others to not purchase from them for making so obvious a cash grab design flaw.
ap3604 said:
And I'll respond to both in kind: If your case has the word "armor" in it... then it should be able to protect the screen from smashing if its dropped
A little bit more lip would have completely taken care of this problem and allowed it to maintain it's slimness.
Click to expand...
Click to collapse
Armor =/= massive lip
Just like Otterbox =/= case made out of otter.
ap3604 said:
They definitely won't get a dime from me, as I will be returning mine, and I encourage others to not purchase from them for making so obvious a cash grab design flaw.
Click to expand...
Click to collapse
If you aren't going to keep yours, and you're going to get a full refund, why do you continually bash this case?
A design flaw is something that blocks actual function, like some of the HTC One cases that cover the IR blaster/power button. This case was specifically designed to be as thin as possible.
I'm not going to bash the Otterbox Defender because I think it's too bulky, I just won't buy it. Some people want that kind of protection. On the other side, some people want a very low lever of protection.
I just bought the Speck candy shell case at Best Buy as I didn't want to take my new phone to work without any protection. So far I like it. The fit is nice and tight, the rubberised buttons feel good, and the raised lip around the screen allows you to put the phone face down without scratching the glass. I also like the fact that the majority of the case is shiny so it slips into a pocket much more easily than the T-Mo TPU case I have for my original Galaxy S. I'm still going to get one of the Spigen glass screen protectors to go with it, but it'll do without for a couple of days more.
Another plus for Speck is they seem to have some more feminine colours. The Spigen cases are all black + one other colour, which doesn't look right with a white phone in my opinion. The Speck case I bought is white with turquoise and looks pretty sharp. It's also feminine without being pink
Hinduboy, with regard to pocket lint, it's not a total lint magnet like some cases, but it definitely picks up a bit. It seems to be quite attractive to cat fur!
Sent from my SGH-M919 using xda app-developers app
Spigen Slim is a nice looking, seems it is a Korea brand?
mahgnillig said:
I just bought the Speck candy shell case at Best Buy as I didn't want to take my new phone to work without any protection. So far I like it. The fit is nice and tight, the rubberised buttons feel good, and the raised lip around the screen allows you to put the phone face down without scratching the glass. I also like the fact that the majority of the case is shiny so it slips into a pocket much more easily than the T-Mo TPU case I have for my original Galaxy S. I'm still going to get one of the Spigen glass screen protectors to go with it, but it'll do without for a couple of days more.
Another plus for Speck is they seem to have some more feminine colours. The Spigen cases are all black + one other colour, which doesn't look right with a white phone in my opinion. The Speck case I bought is white with turquoise and looks pretty sharp. It's also feminine without being pink
Hinduboy, with regard to pocket lint, it's not a total lint magnet like some cases, but it definitely picks up a bit. It seems to be quite attractive to cat fur!
Sent from my SGH-M919 using xda app-developers app
Click to expand...
Click to collapse
Is hat particular speck case difficult to remove? Menacing taking it on/off?
Sent from my SPH-L720 using Tapatalk 2
reverepats said:
Is hat particular speck case difficult to remove? Menacing taking it on/off?
Sent from my SPH-L720 using Tapatalk 2
Click to expand...
Click to collapse
Not difficult at all. It's less flexible than a regular TPU case, but since the front lip is all TPU it comes off pretty easily if you need to get to the battery or SD card.
mahgnillig said:
Not difficult at all. It's less flexible than a regular TPU case, but since the front lip is all TPU it comes off pretty easily if you need to get to the battery or SD card.
Click to expand...
Click to collapse
Awesome! Tanks for the input. In BB right now lol. Heading to the register. Thanks again!
Sent from my SPH-L720 using Tapatalk 2
mahgnillig said:
I just bought the Speck candy shell case at Best Buy as I didn't want to take my new phone to work without any protection. So far I like it. The fit is nice and tight, the rubberised buttons feel good, and the raised lip around the screen allows you to put the phone face down without scratching the glass. I also like the fact that the majority of the case is shiny so it slips into a pocket much more easily than the T-Mo TPU case I have for my original Galaxy S. I'm still going to get one of the Spigen glass screen protectors to go with it, but it'll do without for a couple of days more.
Another plus for Speck is they seem to have some more feminine colours. The Spigen cases are all black + one other colour, which doesn't look right with a white phone in my opinion. The Speck case I bought is white with turquoise and looks pretty sharp. It's also feminine without being pink
Hinduboy, with regard to pocket lint, it's not a total lint magnet like some cases, but it definitely picks up a bit. It seems to be quite attractive to cat fur!
Sent from my SGH-M919 using xda app-developers app
Click to expand...
Click to collapse
I did see that they have those cases at BBY but i was hoping they had the white/grey combo they only had the black and white/blue one. I might just end up ordering it through amazon. I've been using the platinum series white plastic case in the mean time.
What about the Spigen Neo Hybrid, Case-Mate Tough, or Incipio DualPro (Regular & Shine Versions)? They are very comparable to the cases mentioned above.
This is my short take on this new case I just received today. I like it because it is thin. The cut outs are clean and centered. The back has a soft touch plastic feel so it helps with grip. Finger prints do show on the case (some people with dry hands will not have an issue. My hands are normally moist.) but can be easily wiped away.
Normally the hybrid cases with PC (polycarbonate) on the back and TPU on the sides that cover the buttons give them a mushy feeling when pressed. It is hard to tell if you pushed the button all the way down or not. So with the cut outs for the power and volume button, this problem is eliminated. The plastic which separates the two buttons help me to identify each button quickly. I also found the buttons were unintentionally pressed a lot when I didn't have the case. I don't have this issue anymore. I would recommend this case for anyone who wants protection against scratches. It won't protect the phone against high drops. There is no cushion or air pockets to protect the phone. But this is exactly what these thin cases are for, scratch protection and protection against small bumps. I bought it at Amazon. I ordered it around noon Pacific Time and it was shipped after two hours. I was pleased with the speedy handling.
Please check out the pictures below:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Update...this sounds silly but the case seems to make the phone feel heavier to me. But the added weight feels good in the hand. The case by itself is not heavy. Not sure why I feel this way...
Update # 2: 24 hours later, I am still loving this case. The finger print scanner cut out is the perfect size. I have not had any issues unlocking my phone. I actually wanted a clear case but this black color is starting to grow on me. With the camera visor being glossy black and the case being flat black, it adds a stealth look along with providing some contrast.
Update # 3: The case's matte finish does not create too much friction when inserting the phone into your jean packet or pulling it out. This is a plus.
forum.xda-developers.com/nexus-6p/accessories/spigen-t3213191
minhtluu said:
This is my short take on this new case I just received today. I like it because it is thin. The cut outs are clean and centered. The back has a soft touch plastic feel to it helps with grip. Finger prints do show on the case but can be easily wiped away.
Please check out the pictures below:
https://goo.gl/photos/vqvrASNWxK9Q7fey7
https://goo.gl/photos/hvcbsuXJv4u2Sihp8
https://goo.gl/photos/nKYsUJArmK3EiCin7
https://goo.gl/photos/HiJwzh9kNUFMCmCf6
I don't usually post pictures on here so I didn't know how to embed them into the open post.
Click to expand...
Click to collapse
Looks nice, I'm usually pretty impressed with Spigen cases. I ordered this one: http://www.spigen.com/products/nexus-6p-case-rugged-armor hopefully it gets here soon because I'm not a huge fan of the Ringke case I have now.
mlin said:
Looks nice, I'm usually pretty impressed with Spigen cases. I ordered this one: http://www.spigen.com/products/nexus-6p-case-rugged-armor hopefully it gets here soon because I'm not a huge fan of the Ringke case I have now.
Click to expand...
Click to collapse
What don't you like about Ringke? The Rugged Armor is rubbish.
anglerstock said:
What don't you like about Ringke? The Rugged Armor is rubbish.
Click to expand...
Click to collapse
Seems many buyers on Amazon would disagree with you. Three main things I don't like about the Ringke:
1) I don't really like the feel of the case
2) Its a fingerprint magnet, unlike anything I've ever experienced.
3) The front edges are kind of sharp which can make it a little uncomfortable to hold against my ear while on the phone.
If only Otterbox made the Symmetry series for the Nexus 6p and all my future phones, I'd never have to shop around for cases again.
This case is pretty excellent - feels grippy & solid
mlin said:
Seems many buyers on Amazon would disagree with you. Three main things I don't like about the Ringke:
1) I don't really like the feel of the case
2) Its a fingerprint magnet, unlike anything I've ever experienced.
3) The front edges are kind of sharp which can make it a little uncomfortable to hold against my ear while on the phone.
If only Otterbox made the Symmetry series for the Nexus 6p and all my future phones, I'd never have to shop around for cases again.
Click to expand...
Click to collapse
Lol I was going to say that many buyers on Amazon would disagree with you about Ringke, but I guess you know that buyers go with the flow most of the time. All of what you said is true for the Rugged Armor, which are the reasons why I don't like it. And also it is sand magnet too. That's my real life feedback. I am sure the Amazon buyers will disagree
anglerstock said:
Lol I was going to say that many buyers on Amazon would disagree with you about Ringke, but I guess you know that buyers go with the flow most of the time. All of what you said is true for the Rugged Armor, which are the reasons why I don't like it. And also it is sand magnet too. That's my real life feedback. I am sure the Amazon buyers will disagree
Click to expand...
Click to collapse
Ultimately I can just return it if I dont like it. The inconvenience of owning an unpopular phone and being unable to try a product hands on before purchase, but at least Amazon has a solid return policy.
minhtluu said:
This is my short take on this new case I just received today. I like it because it is thin. The cut outs are clean and centered. The back has a soft touch plastic feel to it helps with grip. Finger prints do show on the case but can be easily wiped away.
I don't usually post pictures on here so I didn't know how to embed them into the open post.
Click to expand...
Click to collapse
I love it, except that the upper and lower machined extreme edges aren't protected from certain angles.
I've never been a big fan of cases, especially on beautiful devices like this one - but you just sold me on this case. Great pics!
ZeGuitarist said:
I've never been a big fan of cases, especially on beautiful devices like this one - but you just sold me on this case. Great pics!
Click to expand...
Click to collapse
I am not a fan of cases either and will probably remove it once the phone isn't new to me anymore (in 3 months?) But I can't wait for the super thin one that the others are chatting about from Huawei. I want to ensure my phone doesn't scratch considering the metal body. Good luck.
minhtluu said:
(...)
Click to expand...
Click to collapse
OP, a question to you: do you think the case will accomodate one of those thin metal plates attached to the back plate on the inside, to use with a magnetic car mount? Like this:
The plate should be very slim, only about 0,5-1mm in thickness. Do you think this will work? Any way you could test this out for me even, by sticking something of approx. that thickness in between the back and case?
Thanks in advance!
ZeGuitarist said:
OP, a question to you: do you think the case will accomodate one of those thin metal plates attached to the back plate on the inside, to use with a magnetic car mount? Like this:
The plate should be very slim, only about 0,5-1mm in thickness. Do you think this will work? Any way you could test this out for me even, by sticking something of approx. that thickness in between the back and case?
Thanks in advance!
Click to expand...
Click to collapse
I have that same car mount. It works for me with no issues. I'm sure it will work out for you as well.
BTW...I do not notice the plate after the case is put on. The back is flat. The pictures taken have the plate inserted.
minhtluu said:
I have that same car mount. It works for me with no issues. I'm sure it will work out for you as well.
BTW...I do not notice the plate after the case is put on. The back is flat. The pictures taken have the plate inserted.
Click to expand...
Click to collapse
Haha, what a coincidence! I'm happy to hear you don't even notice the plate sitting there, and even happier to hear that the plate was actually in there in those pics, because I didn't notice it myself either
Cheers!
I'm really enjoying this case as well. I agree with all the OP'sthoughts especially about fixing the sensitive button presses. Overall very happy with the thiness, fit and soft touch. Also purchased thisNexus 6P Case, Monoy High Quality Ultra Thin Matte Black Hard case Cover for Huawei (Google) Nexus 6P 5.7" Devices (2015) (Black Hard Case) https://www.amazon.com/dp/B0168B7RIM/ref=cm_sw_r_other_awd_5XZtwbS5G6308 which is also nice. Very thin but covers most of the visor and has a textured soft touch finish. I did end up using the spigen but may switch. The other case doesn't have an issue with fingerprints.
iNiREALiZED said:
I'm really enjoying this case as well. I agree with all the OP'sthoughts especially about fixing the sensitive button presses. Overall very happy with the thiness, fit and soft touch. Also purchased thisNexus 6P Case, Monoy High Quality Ultra Thin Matte Black Hard case Cover for Huawei (Google) Nexus 6P 5.7" Devices (2015) (Black Hard Case) https://www.amazon.com/dp/B0168B7RIM/ref=cm_sw_r_other_awd_5XZtwbS5G6308 which is also nice. Very thin but covers most of the visor and has a textured soft touch finish. I did end up using the spigen but may switch. The other case doesn't have an issue with fingerprints.
Click to expand...
Click to collapse
Thanks for the info. Which one is thinner between the two?
minhtluu said:
Thanks for the info. Which one is thinner between the two?
Click to expand...
Click to collapse
Without using any tool for measurement they seem to be identical in thinness. Only notable differences between the two would be the visor cover, soft touch finish, and the spigen has a piece that separates the volume and power buttons. Either of these things can be taken as a plus or minus depending on personally preference. If you're deciding between the two the Monoy case shipped and arrived faster.
i wish there was a clear version of this
i dont think i like the idea that the entire top glass is exposed like that. seems like a good place to get scratched
indianajonze said:
i dont think i like the idea that the entire top glass is exposed like that. seems like a good place to get scratched
Click to expand...
Click to collapse
There is a tiny lip so the glass does not contact the surface if placed glass side down. I think you need a screen protector if you're worried.
EvolutiveLabs is currently experimenting with a design for a RhinoShield case (presumably a backless bumper case).
A RhinoShield case will be made for the new Samsung Galaxy Note 7. We are experimenting on a new design for this device. If you are interested in knowing more, please do subscribe to this list and we will keep you updated once we have more information.
The current release date is September. Pre-Order will start later this August.
Anyone that's interested in being notified on the latest news/pre-order/etc.. can sign-up here:
http://www.evolutivelabs.com/products/galaxy-note-7-case
Looks like a decent case. I'll be looking forward to it.
Do any other backless bumper cases exist? I never found one for the Note 5 and would like to for the 7. The back on a bumper case is pointless and just adds thickness.
Lucent said:
Do any other backless bumper cases exist? I never found one for the Note 5 and would like to for the 7. The back on a bumper case is pointless and just adds thickness.
Click to expand...
Click to collapse
I ordered an Aluminum Backless Bumper from eBay a couple days ago. There's a few color options, but, I selected the black, should look nice with the Black Onyx model:
http://www.ebay.com/itm/182230578501
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Looks sweet. Though, I'd like at least like a thin back with the honeycomb pattern they advertise for some minor protection, since it's all glass on the back, too.
Im afraid of this cause what if it lands flat on jts back? No protection at all.
I thought the whole point of a bumper was to be raised on the front and back so it can land on flat surfaces on either side and not damage the front or back. That's what makes it a bumper and not a regular case.
Lucent said:
I thought the whole point of a bumper was to be raised on the front and back so it can land on flat surfaces on either side and not damage the front or back. That's what makes it a bumper and not a regular case.
Click to expand...
Click to collapse
+1 :good:
Exactly, that's the whole point of this thread.
KOLIOSIS said:
I ordered an Aluminum Backless Bumper from eBay a couple days ago. There's a few color options, but, I selected the black, should look nice with the Black Onyx model:
http://www.ebay.com/itm/182230578501
Click to expand...
Click to collapse
This case looks really nice, i will love to see it on the actual phone.
Jerseymase54 said:
This case looks really nice, i will love to see it on the actual phone.
Click to expand...
Click to collapse
I'll post some pix as soon as it arrives. :good:
KOLIOSIS said:
I'll post some pix as soon as it arrives. :good:
Click to expand...
Click to collapse
Please do. Thanks
Thinking about taking a razor blade to the back of one of these Ringke cases I got for $1 to see if I can make my own bumper case. If no one will make a real bumper, maybe we can at least find the fake bumper case that can be easily converted into a real bumper case.
Lucent said:
Thinking about taking a razor blade to the back of one of these Ringke cases I got for $1 to see if I can make my own bumper case. If no one will make a real bumper, maybe we can at least find the fake bumper case that can be easily converted into a real bumper case.
Click to expand...
Click to collapse
I'll probably do likewise,the Poetic Affinity case comes to mind.
The EvoLutive Labs/RhinoShield bumper for the HTC 10 adds too much width in the grip.
Some complained about the stiffness of the buttons as well.
I have no problem w/the latter,but,I did find the added width was too much & mine ended up in the land of misfit phone accessories after 1-2 days of use,which was a bummer @ $30..............
This was my favorite case for the note 5, can't wait to try this out especially since they didn't make one for the SD Edge
Good news! The Ringke Fusion, Fusion Mirror, and Frame are all two different types of plastic glued together, so with some bending and a razor blade to start the cut, you can separate them and throw away the back pretty cleanly. I don't have my Note 7 yet to see if it still keeps the camera off the table, and I'm not sure how much I stretched it pulling them apart, but it looks to be exactly what I wanted. Picture attached. These were $1 or $2 with coupon on Amazon a week or two ago. The fourth one I have from Ringke, the Air, is all TPU with no clear line to cut through, so I'm not even going to attempt making that one backless.
Lucent said:
Good news! The Ringke Fusion, Fusion Mirror, and Frame are all two different types of plastic glued together, so with some bending and a razor blade to start the cut, you can separate them and throw away the back pretty cleanly. I don't have my Note 7 yet to see if it still keeps the camera off the table, and I'm not sure how much I stretched it pulling them apart, but it looks to be exactly what I wanted. Picture attached. These were $1 or $2 with coupon on Amazon a week or two ago. The fourth one I have from Ringke, the Air, is all TPU with no clear line to cut through, so I'm not even going to attempt making that one backless.
Click to expand...
Click to collapse
Well the question now will be...how well it will hold the phone..since it's just tpu..
I would imagine taking it out of your pockets will dislodge it from your make-shift bumper case
Sent from my SM-N910P using Tapatalk
kwazytazz said:
Well the question now will be...how well it will hold the phone..since it's just tpu..
I would imagine taking it out of your pockets will dislodge it from your make-shift bumper case
Click to expand...
Click to collapse
You are correct. The Fusion and Fusion Mirror were too flimsy on their own. The Frame case, however, with its plastic reinforcement wrapping around the TPU, is pretty decent. If you're going to modify a case to turn it into a backless bumper, I recommend only the Ringke Frame of those.
Lucent said:
You are correct. The Fusion and Fusion Mirror were too flimsy on their own. The Frame case, however, with its plastic reinforcement wrapping around the TPU, is pretty decent. If you're going to modify a case to turn it into a backless bumper, I recommend only the Ringke Frame of those.
Click to expand...
Click to collapse
Have you tried it with the frame or just guessing? I'm very curious if this will work because I don't like cases, I prefer bumpers.
skillzo1 said:
Im afraid of this cause what if it lands flat on jts back? No protection at all.
Click to expand...
Click to collapse
I'm with you. It looks good for sure. But because of the lack of back support, I'll have to pass.
Although looking forward to seeing the pics.
The Frame does work and is sturdy. I'll take a photo soon. Not sure what the advantage of back support is. We don't have front support. We have the lip sticking out on both sides to protect both equally.
Everyone is stating the phone feels great without a case. What do we do buy cases day 1 and eliminate that feel. I feel I take off my spigen crystal case just to feel the phone daily. At this point just about every case for the note 7 has been purchased.
If your phone with case has a similar feel to to holding your actual phone please post pics and where you bought it from links are welcome.
Remember the phone has to feel like it was naked that's the goal of this thread.
Yes, transparent cases are perfect for our smartphone, more than Note 7!
Im also looking for a case for my Note. I honestly dont even care about drop protection, I just want the absolute thinnest possible, nice looking case to protect it from scratches, thats it.
Bonus points if it has port / hole covers as well as full button coverage.
Bear motion, black. Looks great and as thin as they come with some awesome texture.
Sent from my SM-N930T using Tapatalk
randyspants said:
Bear motion, black. Looks great and as thin as they come with some awesome texture.
Sent from my SM-N930T using Tapatalk
Click to expand...
Click to collapse
Always use them!
vibrantliker said:
Always use them!
Click to expand...
Click to collapse
Seriously not sure why people don't mention them more, the texture is amazing and if you are into slim cases they fit great.
The Ringke slim case is super thin like the bear motion, but it gives some protection. It covers up to the display and barely makes the phone any bigger at all.
If you guys have the cases please post pics and if you know where to find please post links.
Sent from my SM-N930T using Tapatalk
teegunn said:
The Ringke slim case is super thin like the bear motion, but it gives some protection. It covers up to the display and barely makes the phone any bigger at all.
Click to expand...
Click to collapse
I just took a peek at both the cases I like the ringke slim for all around protection. The curve sides look really nice purchasing one now. This may be what I was looking for.
Sent from my SM-N930T using Tapatalk
Ringke do an Air version too which I've just ordered....
bonerp said:
Ringke do an Air version too which I've just ordered....
Click to expand...
Click to collapse
Hmm. I have a spigen crystal and they look almost identical when you get it take some pics if possible. The problem with my spigen case is it has rigid edges and the grip factor is gone with this case.
Sent from my SM-N930T using Tapatalk
sure. I find spigen aren't quite as thin as they imply in reality. I used a ringke on my note 5 and it was just a tad smoother and thinner than spigen.
I have an olixar gel case that really has that barely there feel imo. You need to like/not mind gel material though, it feels good when you hold it (grippy) but I can imagine people thinking it looks to cheap on their fancy phone.
Perhaps this is a bit more look than feel but I think the Obliq Slim Meta cases do a good job. It helps that they copy the color of the phone I suppose
http://i.ebayimg.com/00/s/MTUwMFgxNTAw/z/694AAOSwsTxXjq9F/$_57.JPG?set_id=8800005007
(I also really like the look of the metallic back)
randyspants said:
Bear motion, black. Looks great and as thin as they come with some awesome texture.
Sent from my SM-N930T using Tapatalk
Click to expand...
Click to collapse
vibrantliker said:
Always use them!
Click to expand...
Click to collapse
I have always used them too. But their current Note7 case provides ZERO screen protection. If you lay the phone down on its face, it will rest on the glass, not the edges of the case. They are aware of the issue and are considering a re-design. They didn't have much of a choice since the edges of the screen curve down giving them less room to protect the device.
Nitemare3219 said:
I have always used them too. But their current Note7 case provides ZERO screen protection. If you lay the phone down on its face, it will rest on the glass, not the edges of the case. They are aware of the issue and are considering a re-design. They didn't have much of a choice since the edges of the screen curve down giving them less room to protect the device.
Click to expand...
Click to collapse
Seen that as a problem also. Not good for these phones.
Sent from my SM-N930T using Tapatalk
teegunn said:
The Ringke slim case is super thin like the bear motion, but it gives some protection. It covers up to the display and barely makes the phone any bigger at all.
Click to expand...
Click to collapse
This was the first case I bought for my Note 7 had one for my S6 Edge + and it was my daily driver, It went on my Note 7 smooth aside from it feeling like it was going to scratch the hell out of my bezel, but loved the fit and it felt great. Didn't like how it mashed and scraped against the buttons because the case has button cutout, and lastly first time i took it off (not easy!) I was sick to my stomach because I thought for sure my bezel was going to be gnarled up (luckily it wasn't, but I feel like over time it would be with this case) and I easily broke the tiny bit of plastic between the volume button cut-out and where the screen begins. So I give this case (unfortunately) a thumbs down. :crying:
dirtymindedx said:
Everyone is stating the phone feels great without a case. What do we do buy cases day 1 and eliminate that feel. I feel I take off my spigen crystal case just to feel the phone daily. At this point just about every case for the note 7 has been purchased.
If your phone with case has a similar feel to to holding your actual phone please post pics and where you bought it from links are welcome.
Remember the phone has to feel like it was naked that's the goal of this thread.
Click to expand...
Click to collapse
CaliCase will be exactly what you're looking for. It will hands down be the thinnest case available when it releases. They're working on it and it's what I'm waiting for. Nothing else comes close.
Dmac1984 said:
This was the first case I bought for my Note 7 had one for my S6 Edge + and it was my daily driver, It went on my Note 7 smooth aside from it feeling like it was going to scratch the hell out of my bezel, but loved the fit and it felt great. Didn't like how it mashed and scraped against the buttons because the case has button cutout, and lastly first time i took it off (not easy!) I was sick to my stomach because I thought for sure my bezel was going to be gnarled up (luckily it wasn't, but I feel like over time it would be with this case) and I easily broke the tiny bit of plastic between the volume button cut-out and where the screen begins. So I give this case (unfortunately) a thumbs down. :crying:
Click to expand...
Click to collapse
That stinks you've had problems with the Ringke case. So far I have had zero problems. Nothing has broken, the case hasn't caused any scratches on the back or bezel and I have even dropped the phone twice on concrete with not issues. That being said, this case does not take the shock of the fall like a TPU case so it definitely doesn't protect from falls as well. And while it does have a small lip raised above the screen on the top and bottom, the sides do not have a raised lip, the just come right up to where the bottom of the curved edges on the side are. But yes I can lay the phone face down and the screen does not touch. Maybe we have a slightly different case? Here is the one I am using:
https://www.amazon.com/dp/B01GIUICP...lid=1QWYMV1QYZ7KH&coliid=I23GCWTOJEPN9E&psc=1
I just received my N7 two hours ago and am now looking for the slimmest case possible. I don't like cases that covers the buttons, I like using the actual phone buttons.
I have this case for my S6E and really wish there was a similar one for the N7, it's the best thing ever since it only snaps to the corners and keeps the phone's edges free:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The G Dept. said:
I just received my N7 two hours ago and am now looking for the slimmest case possible. I don't like cases that covers the buttons, I like using the actual phone buttons.
I have this case for my S6E and really wish there was a similar one for the N7, it's the best thing ever since it only snaps to the corners and keeps the phone's edges free:
Click to expand...
Click to collapse
Maybe this?
https://www.amazon.com/Galaxy-Note-...sbs_107_7?ie=UTF8&refRID=ZEJCBYS7XY05RD8PCR1C
I've gone through all of the threads on screen protectors for the mix and I have observed that the majority aren't happy with the screen protectors they've got. I've ordered almost every type of tempered glass protector available for this device but I'm waiting for them to arrive.
For those who already have some screen protector installed on your mix, could you please upload photos of the device with the screen protector installed.
This is so that it can help other buyers to narrow down to the better screen protectors available. If you are satisfied with the screen protector you have bought, it would also help if you post a link to where you've bought it. I would have done this myself if I had received all the protectors I ordered. Unfortunately I haven't received anything yet.
Some reports suggest that Xiaomi may have used two different suppliers for the digitizer, one of them being prone to getting scratches easily. Even if this was not the case, I have seen many badly scratched Gorilla glass displays so I don't want to take the chance.
Hoping that people who already have some form of screen protection can help other buyers!
I have also bought all the decent cases available on ebay including the Love Mei Performance case and will post a review as soon as I receive them.
UPDATE: The Love Mei Powerful Case. This is the most rugged, shock-proof, snow-proof, dust-proof, splash-proof, everything under the sun-proof (except submersion in water) case available for the Mix.
As you can see from the photo comparison with another regular shock-proof case, this one is a beast. It lives up to its name. Came in a phone-box style premium box and certainly lives up to its price-tag. The case is made up of a hard aluminium shell with rubber layers for shock absorption. It also has a built-in tempered glass protector, meaning you wont need another screen protector.
The manufacturer also claims that the case offers drop-protection from up to 1.8m (5.9 feet).
I wouldn't recommend this case for daily use, mainly due to the sheer size of the case and not because it completely changes the look of the Mix. But for those of you who require extreme protection, if you have a baby at home who thinks the Mix is a Frisbee or if your dog likes playing "catch" and you only have your phone in hand, this is your answer. Buy this case!!
As you can see, I'm not using this case and may use this only if I'm going on a holiday or any outdoor activity which demands more protection for the phone. Hence, I don't regret buying it.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
And now, my favourite case among all the cases I have for the Mix. The 360 Shock proof Rubber case. (This case is sold under many names, the most common being 360 Shockproof. Just follow product images. Anyway there isn't any branding printed on the actual case.)
This looks like something which came straight from the phone manufacturer. Slim and feels premium. Doesn't look or feel cheap and I believe the rubber material offers decent protection from bumps. I don't know whether it can withstand drops though.
The case doesn't feel cheap like the Red Plastic rubber shock proof case I've posted earlier (See 2nd post). It also has a smaller lip above the screen compared to the Plastic case but has raised corners. Maybe the plastic case offers more protection due to the better lip surrounding the screen and also because it is rubber+plastic combo, meaning there are two materials to absorb shock compared to just rubber with this one. But the reason why this is my favourite case is because it offers a balance between looks and protection.
Hope this post has helped you decide which case to get for the Mix. All cases showcased here are available on ebay & Amazon.
Cheers!
I've received the full coverage screen protector and a case today and as promised I'm uploading photos here so that it may help you decide.
I haven't experienced any issues with touch functionality using this protector like some like some users have mentioned. But as the glass hovers over the screen due to the adhesive only around the frame, applying this screen protector makes it look as if the display has a lower contrast ratio. This is due to the gap between the actual display glass and the tempered glass protector. You lose the experience of a fully laminated display. This isn't very noticeable in a well lit room but noticeable whenever you view images or videos with dark scenes. The blacks look greyish.
Also this is a fingerprint magnet and the glass tends to attract some dust. I've tried re-applying the protector over three times and a speck of dust manages to get in under the glass every time. This isn't the first time I'm applying screen protectors and its definitely something to do with the coating on the glass which attracts dust, maybe due to static.
The case feels slightly cheap (maybe because it was cheap ) but looks like it can protect the phone well. The only gripe I have is that there is no cushioning on the back, like cases from Spigen. The rubber like material you see is more like a bumper attached to a plastic shell. The back of the phone touches the plastic shell as you see in the images. Comparable to those hard plastic cases you get. Don't know whether that helps in terms of protection but the case has a good lip around the screen as you can see.
For those wondering, I bought the red color because the other colors for this case looked too bland. The case is available in Gold, light blue, Grey and silver. I wish there was black but there isn't.
I have more cases coming in and will update this when I receive it. Till then I hope those willing to help can also upload photos of their cases and screen protectors.
Cheers!
Here's a couple pix of the PELOSI TPU/Sandstone finish case:
https://www.casefanatic.com/xiaomi/case-xiaomi-mi-mix-pelosi-quicksand-pattern-slim-matte-tpu-cover/
The cutouts for the mics/3.5mm jack/speaker grill/USB Port are precise & allow enough room for oversized headphone/USB plugs.
The volume rocker & power button are covered & are easy to identify by feel.
As for protection,it'll keep the backside free of scratches/etc,but,as for protection from drops/etc... YMMV,as this is a low profile case,adding minimal width & thickness to the overall dimensions.
It works for me,the main reason I even bother with a case for this phone is the slippery grip.
Found some new bumper case.
https://www.armorkingcase.com/blogs/news/imatch-slim-light-aluminum-metal-shockproof-bumper-case-with-kickstand-for-xiaomi-mi-mix
dancoHERO said:
Found some new bumper case.
https://www.armorkingcase.com/blogs/news/imatch-slim-light-aluminum-metal-shockproof-bumper-case-with-kickstand-for-xiaomi-mi-mix
Click to expand...
Click to collapse
Interesting bumper, but would this protect the device? I'd imagine it would just ripple the impact into the ceramic and it would probably still shatter, unless there's a good amount of padding on the inside of the frame.
I prefer the minimal amount of case / bumper on a phone. If it wasn't as slippery ide go naked, but the TPU gives you more hand confidence. Though that amorkingcase looks pretty sweet, if it was not as "sharp and shaped" looking
KOLIOSIS said:
Here's a couple pix of the PELOSI TPU/Sandstone finish case:
https://www.casefanatic.com/xiaomi/case-xiaomi-mi-mix-pelosi-quicksand-pattern-slim-matte-tpu-cover/
The cutouts for the mics/3.5mm jack/speaker grill/USB Port are precise & allow enough room for oversized headphone/USB plugs.
The volume rocker & power button are covered & are easy to identify by feel.
As for protection,it'll keep the backside free of scratches/etc,but,as for protection from drops/etc... YMMV,as this is a low profile case,adding minimal width & thickness to the overall dimensions.
It works for me,the main reason I even bother with a case for this phone is the slippery grip.
Click to expand...
Click to collapse
Where did you get this shipped to/ how long did it take? I ask because it's about half off on ebay , but will probably take a long time to get to me in the states.
LaNsLyDe said:
Where did you get this shipped to/ how long did it take? I ask because it's about half off on ebay , but will probably take a long time to get to me in the states.
Click to expand...
Click to collapse
e-Bay & yes,it took about two weeks to arrive in the U.S.
KOLIOSIS said:
e-Bay & yes,it took about two weeks to arrive in the U.S.
Click to expand...
Click to collapse
Thanks a lot just ordered
LaNsLyDe said:
Thanks a lot just ordered
Click to expand...
Click to collapse
I just looked up the shipping history on my Pelosi case:
November 25 to December 12,but, I'm guessing yours won't take as long to deliver,as mine was in transit during the peak holiday season....
Sent from my lithium using XDA Labs
KOLIOSIS said:
I just looked up the shipping history on my Pelosi case:
November 25 to December 12,but, I'm guessing yours won't take as long to deliver,as mine was in transit during the peak holiday season....
Click to expand...
Click to collapse
Thanks. Patiently waiting
What's the length/width of the love mei case? Its not shown on any site.
ChodTheWacko said:
What's the length/width of the love mei case? Its not shown on any site.
Click to expand...
Click to collapse
Its not mentioned on the box either. It adds approx. 10mm to all sides. Its a huge case as you can see from the pictures.
I went with the Pelosi and I LOVE it!
satishp said:
Its not mentioned on the box either. It adds approx. 10mm to all sides. Its a huge case as you can see from the pictures.
Click to expand...
Click to collapse
Thanks! That pretty much kills pocketability for me. Shame, but I'm not surprised.
ChodTheWacko said:
Thanks! That pretty much kills pocketability for me. Shame, but I'm not surprised.
Click to expand...
Click to collapse
It doesn't affect pocketability that much actually. It just feels like a big phone. The overall size would be similar or slightly wider than the Xperia Z Ultra. But it would still look weird with formal\office wear though if that matters.
The main issue is with daily use. You wouldn't be able to use the phone with one hand anymore.
This case is best for someone who needs serious drop\splash resistance.
There is a similar case which is smaller. Its the imatch case which looks cool in my opinion but the case is hard to find on ebay. You can get it on aliexpress or amazon though.
I liked the Gold and Black variant of this case but I doubt whether it would cause issues when using a wireless charger. Hence, I haven't bought this yet.
iMatch Metal Silicone Shockproof case
If offers a similar level of protection as the Love Mei case but it is smaller. It even has a metal kickstand.
I have to agree that the 360 Shock proof Rubber case listed by the OP is the best case so far. It feels nice and offers a decent drop protection without too much bulk. It looks like it was meant to come with the phone. The matte color looks stealthy. The protection covers all angle of the phone and even a 1 mm lip to protect screen. I have dropped it 3-4 feet onto hardwood floor and sustained no damage. The extra bumps at the corner really provides a nice cushion. I highly recommend it.
@satishp @McoupeMD
Where did you guys purchase the 360 Case?
KOLIOSIS said:
@[email protected]
Where did you guys purchase the 360 Case?
Click to expand...
Click to collapse
I bought it on ebay. They also sell it on amazon. Just takes awhile to arrive from china.
McoupeMD said:
I bought it on ebay. They also sell it on amazon. Just takes awhile to arrive from china.
Click to expand...
Click to collapse
Got it,THX!
https://www.amazon.com/dp/B01MRTEG42/ref=twister_B01N75ZUQ0?_encoding=UTF8&th=1