Database Info

[ROM]RUU_Bravo_Froyo_HTCCN_CHS_CU_2.35.1402.5_Radio _32.54.00.32U_5.14.05.17_release

Have not tested. Found on another website.
DO NOT FLASH THIS IF YOU DON'T KNOW WHAT YOU'RE DOING - CONTAINS NEW HBOOT!
PB99IMG_Bravo_Froyo_HTCCN_CHS_CU_2.35.1402.5_Radio_32.54.00.32U_5.14.05.17_release_163341_signed.zip
MD5: BA07C0257133DDEE436B708EAA9358B7
SHA1: B0ABF605DF0720FEE52724D053289B180030E73D
CRC32: A06B1360
Direct Download: http://exd.ee/PB99IMG_Bravo_Froyo_H...4.00.32U_5.14.05.17_release_163341_signed.zip
(Backup Download)
This is fine to flash, this radio has been reported to work well
32.54.00.32U_5.14.05.17.zip
MD5: 25274049949EBE72FA7886C68A939A16
SHA1: 8AE92A3962E8E4C486C4FA62F820690AC8A5A922
CRC32: 38CBA7DA
Direct Download: http://exd.ee/32.54.00.32U_5.14.05.17.zip
(Backup Download)
radio.img
MD5: F812ACF5DD4516B7080E482DE86BD83B
SHA1: CDD0D684AEADC6AB837B7F425CED4BB5B24F8AC0
CRC32: BF609A9D

China Unicom

Flashed this revision of radio taken from other topic on my desire and it work good.

Done flashing this new Radio and its work. Will monitor other things.
Sent from my HTC Desire using XDA App

Please post the changes, if there is any.

Flashed, and till now no differences to 32.49.00.32U_5.11.05.27.

How did you install it?
When I try to flash the zip file in recovery it says it can't write the radio... never had this problem before ...

syla said:
How did you install it?
When I try to flash the zip file in recovery it says it can't write the radio... never had this problem before ...
Click to expand...
Click to collapse
Do you have 10MB cash size? If yes best way to flash radio is via cable and SDK (I've done it that way).
On alpharev.nl is written "If you downloaded Bravo Data++, please notice the /cache partition is too small to hold Radio flashes from recovery. You can however flash the radio just fine with 'fastboot flash radio radio.img'. Just extract the radio.img from the radio update.zip beforehand.
You can also download the corresponding PB99IMG zipfile, put it on your sdcard, and rename it to PB99IMG.zip. Then start the phone in HBOOT mode (VolDown+POWER) to flash the HBOOT without a PC."
Of course if you have Oxygen Hboot you have 10MB cash too.

mpmdembi said:
Do you have 10MB cash size? If yes best way to flash radio is via cable and SDK (I've done it that way).
On alpharev.nl is written "If you downloaded Bravo Data++, please notice the /cache partition is too small to hold Radio flashes from recovery. You can however flash the radio just fine with 'fastboot flash radio radio.img'. Just extract the radio.img from the radio update.zip beforehand.
You can also download the corresponding PB99IMG zipfile, put it on your sdcard, and rename it to PB99IMG.zip. Then start the phone in HBOOT mode (VolDown+POWER) to flash the HBOOT without a PC."
Of course if you have Oxygen Hboot you have 10MB cash too.
Click to expand...
Click to collapse
Ok thanks I managed to flash it in fastboot (Got oxygen hboot btw) =) will report any changes!

A new gift for the new year.
Sent from my HTC Desire using XDA App

Radio flashed few hours ago...for now it seems to work as the previous...good reception, no battery draining...to be continued
Sent from my HTC Desire GSM #Root S-OFF# OxygeN 2.0 RC5 using XDA App

Does it come with a flashable RIL?

new radio
Hello and thanks for the new radio, I just installed and seems to work fine .. I also noticed a marked improvement in signal reception and battery ...
______________________________
Rom:Alex 1.4 HD A2SD+
Recovery:AmonRa 2.0.1
Radio:32.54.00.32U_5.14.05.17
Kernel:couttstech-2.6.32.27_OC1190_CMBattFix_BFS_BFQ
SD:8Gb
______________________________

Definitely and improvement in battery for me!

Hboot 0.93.0003 in this RUU, if somebody flashes this by accident that wouldnt be good

kai84m said:
Hboot 0.93.0003 in this RUU, if somebody flashes this by accident that wouldnt be good
Click to expand...
Click to collapse
Oh dear, make sure to flash only the radio

the gps working fine after this radio update?

Someone is able to make a RIL update zip file corresponding to the new radio ?

Robert A said:
the gps working fine after this radio update?
Click to expand...
Click to collapse
Hello, I confirm the GPS works well

The RIL from the radio 32.49.00.32U_5.11.05.27 will be ok with this new radio
"system\lib\libhtc_ril.so" on system.img & "libhtc_ril.so" from RIL 32.49.00.32U_5.11.05.27 have the same MD5 SUM: 8C18D65063572954873C871EAD42039D
same results for all files included on the previous flashable RIL!

Problem installing ADRH 6.7.0

Hey, I have a Sensation 4g, I was running ARHD version 3, on 2.3.4 android, I installed that around febraury.
Now I wanted to install the latest Android Revolution HD 6.7.0, I did everything as the list suggested I update the firmware( PYRAMID PVT SHIP S-OFF RL
HBOOT-1.27.1100). But when I install the rom everything goes as normal except that when I reboot in never boots into the rom, I have leave it over 20 mins, and nothing happens, I have tried several times, and I tried to restore back to version 3, everything seems "Restored" except it won't pass from htc logo again (I think it's because I have an updated firmware)
So, how do I manage to install the lasted arhd , or how do I do to downgrade the firmware in order to have it working again, I would prefer to have ICS, but I can't manage to do it, Please help, as my phone is unusable now.
thanks

dcuchillas said:
Hey, I have a Sensation 4g, I was running ARHD version 3, on 2.3.4 android, I installed that around febraury.
Now I wanted to install the latest Android Revolution HD 6.7.0, I did everything as the list suggested I update the firmware( PYRAMID PVT SHIP S-OFF RL
HBOOT-1.27.1100). But when I install the rom everything goes as normal except that when I reboot in never boots into the rom, I have leave it over 20 mins, and nothing happens, I have tried several times, and I tried to restore back to version 3, everything seems "Restored" except it won't pass from htc logo again (I think it's because I have an updated firmware)
So, how do I manage to install the lasted arhd , or how do I do to downgrade the firmware in order to have it working again, I would prefer to have ICS, but I can't manage to do it, Please help, as my phone is unusable now.
thanks
Click to expand...
Click to collapse
Nice detailed description of what exactly is going on, we need more people like you on sensation forum (no i'm not being sarcastic, I'm just glad you have given clear, detailed description instead of crap like I read in other posts "help my phone wont boot" and no other details - sorry, rant over )
By the looks of it, I'm guessing you didnt super wipe when upgrading to lastest ROM version? when coming from GB ROM to ICS you need to do a full/super wipe otherwise phone wont boot.

Jonny said:
Nice detailed description of what exactly is going on, we need more people like you on sensation forum (no i'm not being sarcastic, I'm just glad you have given clear, detailed description instead of crap like I read in other posts "help my phone wont boot" and no other details - sorry, rant over )
By the looks of it, I'm guessing you didnt super wipe when upgrading to lastest ROM version? when coming from GB ROM to ICS you need to do a full/super wipe otherwise phone wont boot.
Click to expand...
Click to collapse
Hey thanks, if you are referring to the super wipe script they provide , I have ran it everytime I tried on installing

dcuchillas said:
Hey thanks, if you are referring to the super wipe script they provide , I have ran it everytime I tried on installing
Click to expand...
Click to collapse
Use 4ext touch recovery. Format everything except sd card.
Sent from my HTC Sensation 4G using xda premium

cameljockey1 said:
Use 4ext touch recovery. Format everything except sd card.
Sent from my HTC Sensation 4G using xda premium
Click to expand...
Click to collapse
I am indeed using 4ext, I have done as you said with no results. I am using a 4ext 1.0.0.2 and the latest is 0.4 or 0.5, I don't know if that really affects on something.
The phone just stays on the htc quietly brilliant logo.

Does Arhd 6.7.0 have sense 3.6.Do I need to update my.firmware to3.33 or will 3.32 work alright. Thanks...
Sent from my HTC Sensation 4G with Beats Audio using xda app-developers app

dcuchillas said:
I am indeed using 4ext, I have done as you said with no results. I am using a 4ext 1.0.0.2 and the latest is 0.4 or 0.5, I don't know if that really affects on something.
The phone just stays on the htc quietly brilliant logo.
Click to expand...
Click to collapse
I remember seeing the exact issue when installing ARHD 6.6.3 for the first time. What I did is just updated the firmware and tried booting to the old stock rom. So this seems to be due to an unmatched firmware. Is that 3.33 firmware u used?

jyo1 said:
I remember seeing the exact issue when installing ARHD 6.6.3 for the first time. What I did is just updated the firmware and tried booting to the old stock rom. So this seems to be due to an unmatched firmware. Is that 3.33 firmware u used?
Click to expand...
Click to collapse
hey, thanks. I did updated the firmware as it stated on the guide, and that would make my firmware unlocked, I was on 2.32. I don't know if that's you're referring with the updating firmware, if there is another way that I can try let me know.
Also, would you suggest that trying to install other rome would solve this?
thanks

reflash the firmware again ..then 4EXT -> format all partitions except sdcard then flash the ROM again

ganeshp said:
reflash the firmware again ..then 4EXT -> format all partitions except sdcard then flash the ROM again
Click to expand...
Click to collapse
you wouldn't believe how many times I have done that, I am beginning to worry that my phone would be unusable.. :crying:

dcuchillas said:
hey, thanks. I did updated the firmware as it stated on the guide, and that would make my firmware unlocked, I was on 2.32. I don't know if that's you're referring with the updating firmware, if there is another way that I can try let me know.
Also, would you suggest that trying to install other rome would solve this?
thanks
Click to expand...
Click to collapse
Definitely won't suggest flashing an unmatched ROM! That was a silly thing i did, to know what will happen if the firmware doesn't match.

dcuchillas said:
you wouldn't believe how many times I have done that, I am beginning to worry that my phone would be unusable.. :crying:
Click to expand...
Click to collapse
ohh you are still stuck ..and somehow ive missed it ( i forgot to subscribe to this thread :silly
ok
shall we go by step by step ?
1.can you post the bootloader details (complete stuff present in the bootloader ...a screen shot of it would do too )
2.if you can use adb/fastboot ..and have them installed already
can you please connect the phone in fastboot/bootloader to pc (phone reads "fastboot usb" after that )
then post the complete output of this below command
(except IMEI and serial number)
fastboot getvar all
3. check the md5 of the ARHD rom you have downloaded ...and verify it against the one given in the thread ...just below the download button it will be there (in general)
(md5sum can be done via 4EXT recover itself ... 4EXT -> install from sdcrad -> calculate/check md5)

Maybe he flashed from GB to 3.33?

cashman0712 said:
Maybe he flashed from GB to 3.33?
Click to expand...
Click to collapse
yeah maybe ..to confirm that only im asking him to give the bootloader details

[Q] HTC Sense UI stops working very often. How to fix it?

Hello
Phone: Sensation XE, 4.0.3 Android, 3.6 UI, Stock ROM, Locked (unROOTed)
So, I'm having a problem with my UI in HTC - it stops working very often. Usually when I'm unplugging the USB cable or changing the mode to Charge only.
I can root the phone and install custom ROM but I don't want to lose all the files [or if you guys can give me some program to back up my stuff, so I could put it on my PC]. Everything is ready to do it (the chinese program to root the phone and the vipers custom ROM is already on my SD card [dont even know if i will lose it after rooting).
But will it help to fix the problem? Because I was thinking that if the UI stops working, so maybe I have to install new one (4.1 included in Vipers ROM, i guess).
And by the way, can you tell me when I would loose the files? (wile rooting or installing the ROM?)
Cheers, Michael.

if you follow the S-OFF procedure backup all your contents from your sdcard to the pc
when you root after S-OFF you sdcard will be untouched
also when you flash the rom will be again untouched

rzr86 said:
if you follow the S-OFF procedure backup all your contents from your sdcard to the pc
when you root after S-OFF you sdcard will be untouched
also when you flash the rom will be again untouched
Click to expand...
Click to collapse
What do you mean by S-OFF?

NexxeR121 said:
What do you mean by S-OFF?
Click to expand...
Click to collapse
when you do S-OFF you unlock all device's partitions
then you can root and flash a custom recovery
see here http://forum.xda-developers.com/showthread.php?t=1661631
by the way how were you going to root it?

The program is called ZhuoDaShi. I accidentally uninstalled the program, because everything is in chinese LOL! I thought I'm launching the program.
But do you think i should download this program again or I shouldn't be bothered and pick different one? (Maybe you could give it)
About the S-OFF, will my 32GB SD card be ok with it?

NexxeR121 said:
The program is called ZhuoDaShi. I accidentally uninstalled the program, because everything is in chinese LOL! I thought I'm launching the program.
But do you think i should download this program again or I shouldn't be bothered and pick different one? (Maybe you could give it)
About the S-OFF, will my 32GB SD card be ok with it?
Click to expand...
Click to collapse
you will be fine with 32gb sdcard
about program there all there in the link i sent you in my previous post
pay attention to prerequisites
but before starting the procedure backup your files from sdcard to pc
best wishes

Hi there again.
I've got a problem with rooting the phone.
So, my phone is S-OFF (it says in hboot) and its locked.
My problem is that I can't unlock it. I have downloaded super user (su-2.3.6.3-efgh-signed.zip) and i installed it through hboot/recovery and it installed everything, but i still dont have root rights and in hboot menu it says S-OFF ... LOCKED
Have I done something wrong?

NexxeR121 said:
Hi there again.
I've got a problem with rooting the phone.
So, my phone is S-OFF (it says in hboot) and its locked.
My problem is that I can't unlock it. I have downloaded super user (su-2.3.6.3-efgh-signed.zip) and i installed it through hboot/recovery and it installed everything, but i still dont have root rights and in hboot menu it says S-OFF ... LOCKED
Have I done something wrong?
Click to expand...
Click to collapse
no you are fine now
completely unlocked
ignore the locked situation
you can flash a patched hboot.see here
http://forum.xda-developers.com/showthread.php?t=1459767
flash 3.33 universal
it has instructions on how to flash it
and before flashing check md5 sums
about root flash this from recovery
http://download.chainfire.eu/315/SuperSU/UPDATE-SuperSU-v1.25.zip
then see if you have root access

MD5?
I searched internet for it... Still dont know. But Ive donwloaded MD5 Checker and there are 2 options: file 1-file 2 ::and:: text - MD5 / MD5 - text
What should I be looking at?
EDIT:
OK, wait. I know whats MD5 (a bit). So i checked the code from the file i have downloaded - the firmware. It should be same as my firmware?
If so... how can I take my firmware and put it on the pc to check it in the program?

NexxeR121 said:
MD5?
I searched internet for it... Still dont know. But Ive donwloaded MD5 Checker and there are 2 options: file 1-file 2 ::and:: text - MD5 / MD5 - text
What should I be looking at?
EDIT:
OK, wait. I know whats MD5 (a bit). So i checked the code from the file i have downloaded - the firmware. It should be same as my firmware?
If so... how can I take my firmware and put it on the pc to check it in the program?
Click to expand...
Click to collapse
do this
put the firmware zip into the root of your sdcard
then from your device use any file manager you have and navigate to that zip
press and hold in that zip until it pops up a menu
go to properties and select calculate md5 checksum or something like that
then see if it matches with the one from firmware's thread

can I ask a very nooby question?
my steps of which files I should install now are;
1. hboot that u gave me link
2. flash 3.33 - same link
3. another link with super user after installing the files before ?
ok I checked the md5 for flash 3.33 on my phone - its the same as given on the forum
so I should just install it step by step with points that I showed you?
once again, sorry for that question, shouldn't waist Ur time

I still need help! Please
Sent from my HTC Sensation XE with Beats Audio Z715e using xda app-developers app

NexxeR121 said:
can I ask a very nooby question?
my steps of which files I should install now are;
1. hboot that u gave me link
2. flash 3.33 - same link
3. another link with super user after installing the files before ?
ok I checked the md5 for flash 3.33 on my phone - its the same as given on the forum
so I should just install it step by step with points that I showed you?
once again, sorry for that question, shouldn't waist Ur time
Click to expand...
Click to collapse
hi, mate sorry for the late
so if you say that md5 sums are matching then:
flash 3.33 firmware.it will take care too for the patched hboot
after that flash the superuser zip from recovery
done

No worrys. Thanks.
I'm just changing to other sd - I have all root files needed on it.
Tell me, why do I need to flash those 2 files (3.33 and su-update) if I already made the root?
But there's one more question bothering me; how can md5 be different on other devices IF its still the same file?
And how should I know if my md5 is different if other users don't give md5 to their files?
I think it was the last question.
Many thanks and best wishes

NexxeR121 said:
No worrys. Thanks.
I'm just changing to other sd - I have all root files needed on it.
Tell me, why do I need to flash those 2 files (3.33 and su-update) if I already made the root?
But there's one more question bothering me; how can md5 be different on other devices IF its still the same file?
And how should I know if my md5 is different if other users don't give md5 to their files?
I think it was the last question.
Many thanks and best wishes
Click to expand...
Click to collapse
the 3.33fw gives you also patced hboot as i said
that means you can perform fastboot commands(with locked bootloader you can't)
if you are already rooted then don't use the su zip
1)i don't know.the only thing i know is if you modify a zip file then the md5 is changing too
2)especially in firmware thread it will always give md5 sums for matching because if it is different(bad download or corrypted file)
the device will probably bricked
now if you have installed a recovery try to flash a custom rom
all custom roms comes already rooted

Ok. In hboot it says firmware 3.33
But I still don't have root rights.
What I should do now is install the:
1. Su update (that you gave me) - through; hboot, racovery, install zip files
And if I will have root rights
2. Install custom rom - the same way as step one
AND ALL OF IT WITHOUT CLEARING SD CARD AND MOBILE?
Sent from my HTC Sensation XE with Beats Audio Z715e using xda app-developers app

Should I do it?
Sent from my HTC Sensation XE with Beats Audio Z715e using xda app-developers app

NexxeR121 said:
Should I do it?
Sent from my HTC Sensation XE with Beats Audio Z715e using xda app-developers app
Click to expand...
Click to collapse
yeap try to flash su file from recovery
then see if you have root permissions
otherwise flash a custom rom(thet are pre-rooted as i mentioned before)
follow these steps for flashing rom
1)backup your current rom just in case(nandroid backup)
2)format all partitions except sdcard
3)flash the rom
done
by the way what recovery did you install?

rzr86 said:
yeap try to flash su file from recovery
then see if you have root permissions
otherwise flash a custom rom(thet are pre-rooted as i mentioned before)
follow these steps for flashing rom
1)backup your current rom just in case(nandroid backup)
2)format all partitions except sdcard
3)flash the rom
done
by the way what recovery did you install?
Click to expand...
Click to collapse
I flashed the su and after it - I could give root permission for applications.
I installed CynaogenMod 10.1 and I dont like it, because a bit of stuff does not work.
Now Im waiting untill DarkSense will be downloaded.
Im using CWM that came with Rom Menager.
By the way, do you know whats the best solution to keep all my contacts and apps for every rom? (i know that i should restore my old rom and than use the solution [that i wish u would give me], but its still worth it)
And what kernel would u pick to save as much battery as possible?
CHEERS

NexxeR121 said:
I flashed the su and after it - I could give root permission for applications.
I installed CynaogenMod 10.1 and I dont like it, because a bit of stuff does not work.
Now Im waiting untill DarkSense will be downloaded.
Im using CWM that came with Rom Menager.
By the way, do you know whats the best solution to keep all my contacts and apps for every rom? (i know that i should restore my old rom and than use the solution [that i wish u would give me], but its still worth it)
And what kernel would u pick to save as much battery as possible?
CHEERS
Click to expand...
Click to collapse
for your contacts you can use mobile backup 2.it is free in google play store
most users are using titanium backup for apps when they are switching roms.me personally i have never used it
about kernel it depends from your personal usage and what settings will you do(overclock,UV etc)
so long i am using sebastianFM's kernel.i am happy with it

where can i get a cyanogen mod radio

ive unlocked my phone but it shoe no signal
when i go to the setting to it wont let me search for the network
.will this radio fix things ,if not what will

You can try flashing a radio, but you need to be s-off. Go to kohr-ah's firmware thread and flash 3.33 universal firmware after you are s-off.
Sent from my HTC Sensation

AndroidSupporter318 said:
You can try flashing a radio, but you need to be s-off. Go to kohr-ah's firmware thread and flash 3.33 universal firmware after you are s-off.
Sent from my HTC Sensation
Click to expand...
Click to collapse
so i just download ,follow instructions, and it will work. and this wont change my phone(delete anything)

Yes, It will change your firmware. Make nandroid backup first, and restore after you flash firmware 3.33. Also don't forget to delete that firmware file after you flash the firmware.
It won't delete or change any files or data on your phone.
Sent from my HTC Sensation

blitz100 said:
ive unlocked my phone but it shoe no signal
when i go to the setting to it wont let me search for the network
.will this radio fix things ,if not what will
Click to expand...
Click to collapse
If you are using CM10.1, which I'm guessing that you are, then your problem with the network search is not radio related. It's a known bug in CM10.1
The network search feature doesn't work. To my knowledge it doesn't work on any CM10.1 ROM for any device (I reserve the right to be wrong about that though)
You aren't doing anything wrong. There is nothing you can change to fix it. It has to be fixed in the CM source code.
If you are using CM9 please say so and we'll figure that out.
As for not getting any signal at all though, that may or may not be a different issue entirely. If CM 9 or 10.1 is booting for you (and if you are looking at the settings for it, then you are obviously booting) then you already have the updated firmware as both ROMs will only run on 3.32 or 3.33.
What country are you in and what network on your on?
Also, do you get no signal at all anywhere you go? Or is it just no signal at your house or something?
And if you switch to any other ICS or JB ROM do you get a signal? That's important. If you do then we can rule out a firmware, radio, or hardware issue.
---------- Post added at 01:37 PM ---------- Previous post was at 01:28 PM ----------
AndroidSupporter318 said:
Yes, It will change your firmware. Make nandroid backup first, and restore after you flash firmware 3.33. Also don't forget to delete that firmware file after you flash the firmware.
It won't delete or change any files or data on your phone.
Sent from my HTC Sensation
Click to expand...
Click to collapse
There is no need to restore a nandroid after flsahing Kohr - Ah's firmware packages. They do not replace the ROM.
However, flashing new firmware can screw with the ROM and send it into bootloops. But wiping cache and dalvik from recovery will fix that, if it even happens.

Could he just flash the radio.img by itself by extracting the radio image from the firmware?
Sent from my HTC Sensation

AndroidSupporter318 said:
Could he just flash the radio.img by itself by extracting the radio image from the firmware?
Sent from my HTC Sensation
Click to expand...
Click to collapse
Only if he repackaged it into a new PM58IMG.zip file. But there's no need for all that since Stempox has already done it.
See this post.
http://forum.xda-developers.com/showpost.php?p=26593365&postcount=2
All the Sensastion radios already packaged into flashable PM58IMG.zip's without the rest of the firmware packages.

Skipjacks said:
Only if he repackaged it into a new PM58IMG.zip file. But there's no need for all that since Stempox has already done it.
See this post.
http://forum.xda-developers.com/showpost.php?p=26593365&postcount=2
All the Sensastion radios already packaged into flashable PM58IMG.zip's without the rest of the firmware packages.
Click to expand...
Click to collapse
so i just flash it??

blitz100 said:
so i just flash it??
Click to expand...
Click to collapse
From stempox's thread yes
Sent from my HTC Sensation using xda premium

blitz100 said:
so i just flash it??
Click to expand...
Click to collapse
In boot loader, not in recovery.
Sent from your phone. You should be careful where you leave that thing.

i tried it and it aborted it

...

Skipjacks said:
In boot loader, not in recovery.
Sent from your phone. You should be careful where you leave that thing.
Click to expand...
Click to collapse
how do i do that

blitz100 said:
how do i do that
Click to expand...
Click to collapse
put the pg58img.zip in the root of the sdcard
then boot into bootloader
it will search for that zip and recognize it
it will ask you to do the update
but wait for Skipjacks to confirm it
i don't know much about radio/rils(i said the above because these are the steps that requires when you are flashing firmware)

rzr86 said:
put the pg58img.zip in the root of the sdcard
then boot into bootloader
it will search for that zip and recognize it
it will ask you to do the update
but wait for Skipjacks to confirm it
i don't know much about radio/rils(i said the above because these are the steps that requires when you are flashing firmware)
Click to expand...
Click to collapse
You don't need me. You are right!
But, check the md5 sum first after you download the pm58img.zip file. Check it against the on listed under the download link in Stempox's thread. If they don't match delete the file you downloaded and do not proceed.
Sent from your phone. You should be careful where you leave that thing.

AT&T HTC One X Bricked (Blocked)

Good day Friends of the Forum
I have a problem and do not know how to fix it , I have navigate a lot in the network and I could not get my phone to work . I have HTC One X from AT&T. By playing around with the phone, accidentaly I delete the O.S. so right now my phone is locked . I can't load Origanal or Custom ROMS . The only thing I can do is enter the bootloader and install recovery ( TWRP ) I installed several versions of TWRP to install a custom rom or I locked the bootloader to install the original RUU and everything has been WITHOUT SUCCESS .
Right now I have S -ON , my HBOOT is 2.14 and I can install TWRP Recovery 2.6.0.0 or 2.6.3.0 .
I have read in many places that I have to make an S -OFF to install a Custom ROM , but all I get Tips that I need an OS runing to finish the installation (or modified to do the S -OFF) . What can I do if my S.O. is actuall blocked (brick). Only screen I got when I turned on or reboot my is the white screen " HTC quietly brillant" .
My friends , I request help from the wise in this range. Since I ran out of ideas . I attached pictures with my phone information
regards

You are not bricked (or "blocked", whatever that means). A brick means the device cannot be recovered without opening the device (replacing mainboard, JTAG, etc.). If the screen comes on, its not bricked.
Just use your unlock token to unlock the bootloader again. TWRP and custom ROMs won't install if the bootloader is relocked. The unlock token will sometimes take several (or even many) tries to work. So if you tried already, and it didn't work, just keep trying.
Also, if you are SuperCID (which was required to get bootloader unlock on the AT&T version) and S-on (which you are) DO NOT RUN the 3.18 RUU. If you do so, you will brick the device for real (only recoverable by JTAG).
My advice would be re-unlock the bootloader, install TWRP, install the custom ROM of your choice, and then achieve S-off.
Also, I find this situation comes up far too often ("I wiped the OS and I don't know what to do"). Don't wipe things (like the OS) if you don't know what the result is going to be. And if you had made a nandroid before messing with things, you could have just restored. Seems there are just far too many n00bs getting into this hobby without exercising any basic common sense.

Thank you so much for your advice.
I just re-Unlock my phone.
Would you please help me with one issue? When I try to install a custom rom via TWRP 2.6.0.0 it says checking for MD5 file. No MD5 file found.
and the phone start restarting and restarting...
How MD5 file works or whats the the function of this file?
Best regards

eL_pIt said:
Would you please help me with one issue? When I try to install a custom rom via TWRP 2.6.0.0 it says checking for MD5 file. No MD5 file found.
and the phone start restarting and restarting...
How MD5 file works or whats the the function of this file?
Click to expand...
Click to collapse
MD5 is a checksum file (verifies the integrity of the download). But this shouldn't be happening in TWRP. Try the default wipe option in TWRP (factory reset, cache and Dalvik) and try again.

Uncheck the verify md5 box
Sent from my VENOMized HoxL

area51avenger said:
Uncheck the verify md5 box
Click to expand...
Click to collapse
That's what I was thinking. But I'm on TWRP 2.6.0, and don't see that option.
Sent from my GT-N5110 using xda app-developers app

area51avenger said:
Uncheck the verify md5 box
Sent from my VENOMized HoxL
Click to expand...
Click to collapse
Doesn´t Work

redpoint73 said:
That's what I was thinking. But I'm on TWRP 2.6.0, and don't see that option.
Sent from my GT-N5110 using xda app-developers app
Click to expand...
Click to collapse
I have a problem when I try to install custom rom ViperXL_4.2.0.zip
When I try to install, the rom send me to a wizard, I follow the steps of the wizard and the star installing the rom, when the installation percent reach 7 % the phone restarts and send me the HTC quitly brillant screen.

Do you think that I need re-lock the bootloader and then re-unlock the bootloader??
thanks

No, do not relock the bootloader, that isn't the problem. I'm not trying to sound harsh, but why are you attempting to install custom ROMs? You lack a basic understanding of what you're doing, this is very dangerous. I seriously suggest that once you get the phone up and running again you stop modifying it and take the time to do some research and learn about what you're doing. You should always know what you're doing before you do it. Not knowing what you're doing leads to situations like this where you have idea how to recover, or even to a bricked device.
Did you manually check the md5 of the ROM zip after downloading it? The file might be corrupt, thus causing the installer to fail.
Sent from my Evita

eL_pIt said:
Do you think that I need re-lock the bootloader and then re-unlock the bootloader??
Click to expand...
Click to collapse
No, I don't think relocking is going to help at all.
Try downloading the ROM again.
Sent from my GT-N5110 using xda app-developers app

timmaaa said:
No, do not relock the bootloader, that isn't the problem. I'm not trying to sound harsh, but why are you attempting to install custom ROMs? You lack a basic understanding of what you're doing, this is very dangerous. I seriously suggest that once you get the phone up and running again you stop modifying it and take the time to do some research and learn about what you're doing. You should always know what you're doing before you do it. Not knowing what you're doing leads to situations like this where you have idea how to recover, or even to a bricked device.
Did you manually check the md5 of the ROM zip after downloading it? The file might be corrupt, thus causing the installer to fail.
Sent from my Evita
Click to expand...
Click to collapse
Thanks verry much for your advice, now I am living the consequences for start playing with my device without knowledge. I promise when this nightmare ends, I am going to do a deep research for installing custom roms and how to make backups before playing.
This problem happens with all roms that I try to install?? In your experience how do I make a good MD5 manually check .
Regards

The md5 sum will be listed on the download page of the ROM, you need to use an md5 checking program/app to make sure the md5 of the downloaded file matches the one listed on the download page. To make this easier to understand, an md5 is like a fingerprint of the file made up of a series of letters and numerals. If the md5 of the file matches the one listed on the site you know the file is exactly as it should be. If it doesn't match then you know the file has been corrupted during the download.
Sent from my Evita

eL_pIt said:
I have a problem when I try to install custom rom ViperXL_4.2.0.zip
When I try to install, the rom send me to a wizard, I follow the steps of the wizard and the star installing the rom, when the installation percent reach 7 % the phone restarts and send me the HTC quitly brillant screen.
Click to expand...
Click to collapse
Wipe the phone using TWRP wipe options, Then try to install it again, If it fails again then wipe and install clean ROM http://forum.xda-developers.com/showthread.php?t=1655011 Or try the stock ROM http://forum.xda-developers.com/showthread.php?t=2423735
Then try viperXL again. Make sure its the full 7xxMB Zip and not the update thats like 44MB
(Wiping With TWRP will not erase TWRP)

tjhooker73 said:
Wipe the phone using TWRP wipe options, Then try to install it again, If it fails again then wipe and install clean ROM http://forum.xda-developers.com/showthread.php?t=1655011 Or try the stock ROM http://forum.xda-developers.com/showthread.php?t=2423735
Then try viperXL again. Make sure its the full 7xxMB Zip and not the update thats like 44MB
(Wiping With TWRP will not erase TWRP)
Click to expand...
Click to collapse
But, how can I install a Clean Rom if it asks me S-OFF.....:crying: Stiil with my Phone Off

eL_pIt said:
But, how can I install a Clean Rom if it asks me S-OFF.....:crying: Stiil with my Phone Off
Click to expand...
Click to collapse
You don't need s-off to flash clean rom
Sent from my iPhone using Tapatalk

31ken31 said:
You don't need s-off to flash clean rom
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Hi, I don't know what am I doing wrong, I still can´t install a clean rom. This is what I get when I try to install I get this message "All Done!! Updating Partition Details "
What I've been missing, because I restart my phone after that message and I get White Screen (HTC Quality Brillant) and the phone has a never stop restarting.
I attached images, please see it. First One is loading the clean ROM and Secon One is when finish installing ROM.
Best Regards

Did you check the md5 of the ROM after downloading it? I did ask you this in a previous post but you never answered.
Sent from my Evita

eL_pIt said:
Hi, I don't know what am I doing wrong, I still can´t install a clean rom. This is what I get when I try to install I get this message "All Done!! Updating Partition Details "
What I've been missing, because I restart my phone after that message and I get White Screen (HTC Quality Brillant) and the phone has a never stop restarting.
I attached images, please see it. First One is loading the clean ROM and Secon One is when finish installing ROM.
Best Regards
Click to expand...
Click to collapse
Did you flash boot.img via fastboot after rom install?
Fastboot flash boot boot.img
Sent from my iPhone using Tapatalk

timmaaa said:
Did you check the md5 of the ROM after downloading it? I did ask you this in a previous post but you never answered.
Sent from my Evita
Click to expand...
Click to collapse
I´m Sorry, I din't check the md5, do you think the problem resides in the md5 file?? I already try with 12 custom and 1 clean rom for the AT&T HTC One X, that's why I didn´t check the md5 file, because I thought that one of all the roms, one of them is going to be the correct one. In some cases there is no md5 file for downloading.
Best regards