Database Info

[UPDATED] [32A] Link to the official Rogers 2.1 Magic Update - OTA, RUU and img files

Hey!
The link to the FOTA file is
http://fotadl.htc.com/OTA_Sapphire_...3.05.631.7_release_signedu2j8pjou0wsg6p6q.zip
Multiupload link http://www.multiupload.com/VLR1WRILII
You can get the RUU at http://www.multiupload.com/MG55E61MH1
And system, radio, boot and data img files (to flash from fastboot without getting a perfected SPL) are at http://dlf.transfer.ro/ruu_2.1-transfer_RO-08sep-5f012a.rar
I've checked out the update-script and the contents of the zip and...
1. It flashes a new radio - 6.35.16.19.
2. As klothius said, it needs the official 1.5 SenseUI Rogers update and the stock recovery that came with it - otherwise the MD5 verification will fail and the update will halt.
3. New kernel and new recovery. If you have an engineering SPL you can flash your favorite recovery right back after the update.
I'll probably add to this as I find out more

Can i flash this through recovery or is it a RUU? and if i can flash, i need Hero recovery new radio and spl on my 32a (also if it isn't by rogers)?

Just root it with universalandroot!
This rocks! Finally!!

@MARCO310791: I can't say, I haven't tried it yet. It looks like a stock update zip, like the ones you flash in recovery, so it might work. It works by patching the files in the official Rogers release, so it might not work on other ROMs without modification.
From what I've seen in the update-script, it doesn't touch the data partition (except a few of the files that the 1.5 update created there).
WARNING! It installs a new radio - 6.35.16.19.

Does it install new spl?

Nope, SPL is untouched.
It does, however, flash a new recovery, which means you'll need to flash a modded recovery from fastboot when it's done.

Well if that's true, we'll have root even after flashing this...although you must have a rogers rom already installed and you must have a rogers htc original stock recovery installed too.

working on it as we speak

Can anyone download the RUU? It's linked from http://www.htc.com/ca/support/h/magic-update, but it looks like the link is wrong - it just redirects to the support homepage

works fine by me

keinengel said:
Can anyone download the RUU? It's linked from http://www.htc.com/ca/support/h/magic-update, but it looks like the link is wrong - it just redirects to the support homepage
Click to expand...
Click to collapse
Link is working for me.
Edit: tried including it here, but when I click on that one I get the same result as you. Try a right-click, save-as.

http://member.america.htc.com/download/RomCode/HTC%20Magic%20(Rogers)/Magic_Rogers3.54.631.3.exe

cypis said:
http://member.america.htc.com/download/RomCode/HTC%20Magic%20(Rogers)/Magic_Rogers3.54.631.3.exe
Click to expand...
Click to collapse
Nope, still redirects back to support page

anyway i am almost done updating to make a nandroid and root it

Maybe my last edit was too late. Right-click, save-as works fine here.

capychimp said:
anyway i am almost done updating to make a nandroid and root it
Click to expand...
Click to collapse
Really??!!?? it's amazing, man. You're so fast!

I am currently running minmou final with following;
-Radio 3.22
- SPL: 1.33.2010
- Recovery: Amon_RA Recovery 1.7
I am confused, what do i need to do to install this offical update..
pls help!!

arfan1984 said:
I am currently running minmou final with following;
-Radio 3.22
- SPL: 1.33.2010
- Recovery: Amon_RA Recovery 1.7
I am confused, what do i need to do to install this offical update..
pls help!!
Click to expand...
Click to collapse
take it easy... some rom wil be there in some hours/days with this update

almost ready to make a nandroid for you to play with

In RUU there is SPL: hboot_7200A_1.76.0010_100114.nb0

[RADIO][30 SEP 11](+RIL)New radio from OTA update: 20.48.30.0822U_3822.09.08.20_M

New radio from the new Desire S OTA update [HTC_Europe_2.10.401.4](Sense 3.0, Andriod 2.3.5).
Just flash it via HBOOT.
/
1. Rename the file to PG88IMG.zip(not PG88IMG.zip.zip!)
2. Copy the file to the root of your SD card.
3. Restart you device into Recovery, and wipe cache and dalvik cache.(not necessarily needed, but recommended)
4. Restart your device into Bootloader
5. Press "power" button to acces HBOOT instead of fastboot
6. Wait 5-15sec, the bootloader is searching for uptades, if it findes the file, you can update the radio by pressing "vol up"
7. If it's finished, it says press "power" button to reboot, press it to finish.
/
Tested, working fine with old HBOOT, and also with new 2.00.0002 HBOOT.
GPS, WIFI, BT are all OK.
DOWNLOAD RADIO 20.48.30.0822U_3822.09.08.20_M(megaupload)
DOWNLOAD RADIO 20.48.30.0822U_3822.09.08.20_M MIRROR 1(hotfile)
DOWNLOAD RADIO 20.48.30.0822U_3822.09.08.20_M MIRROR 2(wupload)
radio.img MD5 80a39175defde876379e1c6b39bd1221
zip file MD5 18c0eeae21dfcd2145c4377ce69aa209
Update 1 [03 OCT 11]:
Added RIL from OTA. Download the rar file, unrar it, copy to your SD card, !make a backup!, copy and overwrite all 3 files in /system/lib (eg. with Rootexplorer, or ESExplorer), after that restart the phone, you're done.
MD5: A0EA59A04931F435D6AC8260720DF07E
If it was useful for you, don't forget to hit the thanks button.
Many thanks to cjward23!

ffodi said:
New radio from the new Desire S OTA update [HTC_Europe_2.10.401.4](Sense 3.0, Andriod 2.3.5).
Just flash it via HBOOT.
Tested, working fine with old HBOOT.
GPS, WIFI, BT are all OK.
Don't forget to reneme the file to PG88IMG.zip
DOWNLOAD RADIO 20.48.30.0822U_3822.09.08.20_M
DOWNLOAD RADIO 20.48.30.0822U_3822.09.08.20_M MIRROR 1(hotfile)
DOWNLOAD RADIO 20.48.30.0822U_3822.09.08.20_M MIRROR 2(wupload)
MD5 80a39175defde876379e1c6b39bd1221
If it was useful for you, don't forget to hit the thanks button.
Many thanks to cjward23!
Click to expand...
Click to collapse
the md5 is related to the unzipped radio img. Please check if the original flashable zip archive has this
md5: 18c0eeae21dfcd2145c4377ce69aa209

heavyhms said:
the md5 is related to the unzipped radio img. Please check if the zip archive has this md5: 18c0eeae21dfcd2145c4377ce69aa209
Click to expand...
Click to collapse
Thanks, yes the MD5 is for the radio.img in the zip file, and the MD5 related to the zip file is this: 18c0eeae21dfcd2145c4377ce69aa209, the same as the MD5 in your post.(checked)

ffodi said:
New radio from the new Desire S OTA update [HTC_Europe_2.10.401.4](Sense 3.0, Andriod 2.3.5).
Just flash it via HBOOT.
Tested, working fine with old HBOOT.
Click to expand...
Click to collapse
Does it work with new HBOOT (2.xx.xxxx)?
Has anyone tried it?
Are there a new versions of RIL files to go with it?

ben_pyett said:
Does it work with new HBOOT (2.xx.xxxx)?
Has anyone tried it?
Are there a new versions of RIL files to go with it?
Click to expand...
Click to collapse
The original OTA also install new Hboot 2.00.0002

ben_pyett said:
Does it work with new HBOOT (2.xx.xxxx)?
Has anyone tried it?
Are there a new versions of RIL files to go with it?
Click to expand...
Click to collapse
Not tested yet, but it should work, becouse the new OTA update uses the new 2.00.0002 HBOOT.

ffodi said:
Not tested yet, but it should work, becouse the new OTA update uses the new 2.00.0002 HBOOT.
Click to expand...
Click to collapse
Can confirm now tried, tested and working on new hboot

ofcourse working on 2.00.2002

Thanks for testing guys, first post modified.

Where i can read my version of hboot?
What's the improvement?
Sent from my HTC Desire S using XDA App

pmattia90 said:
Where i can read my version of hboot?
What's the improvement?
Sent from my HTC Desire S using XDA App
Click to expand...
Click to collapse
reboot to bootloader and u will see hboot version

Adidas108 said:
reboot to bootloader and u will see hboot version
Click to expand...
Click to collapse
Hi, Adidas... waiting for your new rooted stock rom
New radio working fine here, with new hboot and s-off by revolutionary

Just flashed it. All good. Had me worried for a bit when it hung on the white HTC logo for what seemed like ages, but it booted eventually.

Radio flashed, no probs.
Thanks to the op for this.
Peace
Sent from somewhere up north ...

Just updated to the new radio, no problems at all.
ROM: Virtuous Unity 2.39
Hboot: 2.00.2002 (The leaked one)
Thank you ffodi and cjward23!

juniorxdb said:
Hi, Adidas... waiting for your new rooted stock rom
Click to expand...
Click to collapse
This is just patched 1.47.401.4 Europe so nothing new.When we get new RUU i'll make rooted stock

will this radio work with old eng hboot 0.98.2000?

are there some new ril files?
libhtc_ril.so
libreference-ril.so
libril.so

just flashed this new radio, can confirm all is fine with old ENG HBOOT
---------- Post added at 10:14 AM ---------- Previous post was at 09:34 AM ----------
After booting for the first time after installing this radio everything apeared to work fine until i opened up the market, tried to update an app and was given an error message stating there was insufficient space on my device to download update. (even though i had 900mb free space on the phone!
so i rebooted into recovery and there it was
E:Can't open /cache/recovery/log
E:Can't open /cache/recovery/log
E:Can't open /cache/recovery/last_log
E:Can't open /cache/recovery/last_log
at this point i begin to freak out a little!!
recovery was showing my cache partition as ext3 even though everything was previously ext4.
i proceeded to format system, data and cache successfully and then restored from a previous backup
rebooted and all is fine again!
i can install apps from market again and when i rebooted into recovery just to check my partitions all of them are there as ext4 just like they should be!
im telling u this because it has confused me as to why i got these error messages and how i was able to simply recover from them by formating and restoring a backup.....?
any ideas guys?

Eclipse_Droid said:
just flashed this new radio, can confirm all is fine with old ENG HBOOT
---------- Post added at 10:14 AM ---------- Previous post was at 09:34 AM ----------
After booting for the first time after installing this radio everything apeared to work fine until i opened up the market, tried to update an app and was given an error message stating there was insufficient space on my device to download update. (even though i had 900mb free space on the phone!
so i rebooted into recovery and there it was
E:Can't open /cache/recovery/log
E:Can't open /cache/recovery/log
E:Can't open /cache/recovery/last_log
E:Can't open /cache/recovery/last_log
at this point i begin to freak out a little!!
recovery was showing my cache partition as ext3 even though everything was previously ext4.
i proceeded to format system, data and cache successfully and then restored from a previous backup
rebooted and all is fine again!
i can install apps from market again and when i rebooted into recovery just to check my partitions all of them are there as ext4 just like they should be!
im telling u this because it has confused me as to why i got these error messages and how i was able to simply recover from them by formating and restoring a backup.....?
any ideas guys?
Click to expand...
Click to collapse
Did you wiped cache and dalvik cache before installing the new radio?

[HOW-TO] Flash the latest radio for your One S

There is a guide on how to flash a new radio on the One S, but its outdated and obsolete.
While we still dont have S-OFF yet, there is a trick that lets you flash radio images.
Requirements.
The latest TWRP recovery image. Available here.
Grab the latest US or EU radio here and copy it to your SD Card. (adb push filename.zip /sdcard/radio.zip) Click the changelog-button to see which radio's are US and EU.
Lets get flashing
Reboot your device into the bootloader.
Code:
adb reboot bootloader
Use fastboot to boot up into recovery.
Code:
fastboot boot openrecovery-twrp-2.3.1.0-ville.img
You will boot directly into recovery from the recovery image, and no restrictions apply. Now simply flash the radio.zip file that you pushed over earlier, and you're all set!
Enjoy!
Credits to xkonni for the tip!

Is it really bad if I flash a EU radio on my TMOBUS device? I have done so 24hrs ago and notice very fast speeds and good signal strength. I don't get why there is a difference.

Closed Source Project said:
Is it really bad if I flash a EU radio on my TMOBUS device? I have done so 24hrs ago and notice very fast speeds and good signal strength. I don't get why there is a difference.
Click to expand...
Click to collapse
i would like to know the answer to this also

No it works great on my tmobile one s no problems here
sent from a guy living in a van down by the river

Untouchab1e said:
There is a guide on how to flash a new radio on the One S, but its outdated and obsolete.
While we still dont have S-OFF yet, there is a trick that lets you flash radio images.
Requirements.
The latest clockwork recovery image. Available here. Make sure you get the latest version for the Ville. (released on or after 29-apr-2012).
Grab the latest US or EU radio here and copy it to your SD Card. (adb push filename.zip /sdcard/radio.zip) Click the changelog-button to see which radio's are US and EU.
Lets get flashing
Reboot your device into the bootloader.
Code:
adb reboot bootloader
Use fastboot to boot up into recovery.
Code:
fastboot boot recovery-clockwork-5.5.0.4-ville.img
You will boot directly into recovery from the recovery image, and no restrictions apply. Now simply flash the radio.zip file that you pushed over earlier, and you're all set!
Enjoy!
Credits to xkonni for the tip!
Click to expand...
Click to collapse
got the same result by just rebooting into bootloader, then choosing fastboot>recovery.....then chose radio.zip i placed on "sdcard"...never having to plug phone into PC

On leedroid without the radio it gets about 12mb but with this radio i get 10mb, when i load the same site, this radio loads about 2seconds faster..tmobUS thanx btw

I too just flashed the .zip from Clockwork Recovery from my T-Mobile US phone for the EU radio. Working just fine.

I'm getting an error when I enter stock recovery that it can't find /sdcard cause the file doesn't exist... a little help please

ralph96gt said:
I'm getting an error when I enter stock recovery that it can't find /sdcard cause the file doesn't exist... a little help please
Click to expand...
Click to collapse
Had the exact same problem as you.
I just flashed the recovery with CWM recovery image. The one in this topic didn't work for me cause it wouldn't mount the /sdcard either. I used a different version.
Then I just installed the radio.zip from this topic.

So if I have the last CWM, just I have to put the zip to the SD, and flash it from recovery?
Edit: The radio I have now is the 0.15.31501S.19_2_10.13.31501S.06L

cualla84 said:
So if I have the last CWM, just I have to put the zip to the SD, and flash it from recovery?
Edit: The radio I have now is the 0.15.31501S.19_2_10.13.31501S.06L
Click to expand...
Click to collapse
From what Ive been told, and what I did, was to boot directly into the latest recovery image. Meaning, you dont flash the recovery image first, you simply fastboot boot into it, then you flash the radio.zip from there.
Again, make sure you pick the newest version of the recovery image.

Untouchab1e said:
From what Ive been told, and what I did, was to boot directly into the latest recovery image. Meaning, you dont flash the recovery image first, you simply fastboot boot into it, then you flash the radio.zip from there.
Again, make sure you pick the newest version of the recovery image.
Click to expand...
Click to collapse
Thank you! I have the CWM 5.8.3.1. I have to wipe before flashing?

cualla84 said:
Thank you! I have the CWM 5.8.3.1. I have to wipe before flashing?
Click to expand...
Click to collapse
No, you dont have to wipe data before flashing a new radio.

Untouchab1e said:
No, you dont have to wipe data before flashing a new radio.
Click to expand...
Click to collapse
Thank you very much! I'll make a nandroid my rom, and flash radio and alpha8 of CM9

cualla84 said:
Thank you very much! I'll make a nandroid my rom, and flash radio and alpha8 of CM9
Click to expand...
Click to collapse
Sounds like a good plan! Enjoy Alpha8. Nightly builds are available too (check signature)

Untouchab1e said:
Sounds like a good plan! Enjoy Alpha8. Nightly builds are available too (check signature)
Click to expand...
Click to collapse
Better then flash the nightly? What improvements have regarding alpha8? I can´t see the features!

cualla84 said:
Better then flash the nightly? What improvements have regarding alpha8? I can´t see the features!
Click to expand...
Click to collapse
No Ville-specific improvements, just the latest CM9 commits. Its basically the exact same ROM, just with the latest CM9 improvements.

Thanks Untouchab1e!
Untouchab1e said:
No Ville-specific improvements, just the latest CM9 commits. Its basically the exact same ROM, just with the latest CM9 improvements.
Click to expand...
Click to collapse
OK! I will charge the battery and I get to it!

Flashed 1.78 EU radio to stock tmous and I'm getting zero issues and excellent battery life so far. Thx
Sent from my HTC VLE_U using xda premium

flash directly from cwm?
having already unlocked, root and flashed the latest cwm, can't i just move the radio.zip file to the phone and flash directly in cwm instead of all commands?

[ROM]Stock odexed Android 4.2.2 Sense 5 - k2ul 3.11.401.1 & k2u 3.11.401.106

Here is some candy for you guys
HTC ONE SV - Android 4.2.2 Sense 5 Rom for flashing in recovery.
I made k2u version from my backup/dump and k2ul version is made of a System Dump from russian k2ul (thanks to radarga for the dump).
I recommed TWRP recovery for flashing.
No root or Superuser inside!
This is a test version, time was to short to test everything, but it boots also on k2u and Wifi/Mobile data is working for me.
Download:
k2ul - LTE
k2ul_4.2.2_3.11.401.1_stock_odexed_v3.zip
mirror (dev-host):
k2ul_4.2.2_3.11.401.1_stock_odexed_v3.zip
k2u - Non LTE
k2u_4.2.2_3.11.401.106_stock_odexed_v1.zip
or mirror
k2u_4.2.2_3.11.401.106_stock_odexed_v1.zip
Deodexed Non-LTE version by coloured_chalk
k2u_4.2.2_3.11.401.106_DEODEXED
Installation:
Make backup and full wipe in recovery.
S-off, flash in recovery.
S-on, do the same. And unzip the boot.img from the k2ul_4.2.2_3.11.401.1_stock_odexed_v2.zip and flash with fastboot.
Don't forget to flash Superuser file (look into my index thread) if you want root!
Bugs:
- noisy sound in calls (without firmware files)
Thanks:
- to HTC for the update
- to radarga for the dump
- to bkcokota for fixing bluetooth
- to jmz for hosting
- to Seanie280672 for cwm backup
- to coloured_chalk for deodexed k2u version
Have fun.

Thank youuuuuuuuuuuuuuu!

This is a pure stock, right? That means nothing is modified or customized and everything is originally from htc?

I love you, man *_*
EDIT: ok, now I really can't wait for OTA to come! it's lovely!

alivevsdeath said:
This is a pure stock, right? That means nothing is modified or customized and everything is originally from htc?
Click to expand...
Click to collapse
Nothing modified. Only busybox files are added from radarga as i have seen now.
Notice: i can not guarantee that everything works like it should.
But it looks very promising

after update: I cannot hear the call - the speakers has problem - it's too noisy
my ussd code is Chinese
i hate Chinese, how to fix it ?
from my k2_ul

I seem to be having an issue with the phone crashing when I turn on bluetooth, can anyone replicate this issue or is it just me with it?

To those who have problems: I believe you guys should wait for the OTA to come. Maybe there are too many different types of the k2ul so you need the right update for exactly your k2ul type/serial number or something.

Malakaaa said:
To those who have problems: I believe you guys should wait for the OTA to come. Maybe there are too many different types of the k2ul so you need the right update for exactly your k2ul type/serial number or something.
Click to expand...
Click to collapse
Yes, thats right.
This is only for play around, until the update is here for all!
You guys must notice, that the firmware files from OTA are missing in this rom.
There is no new hboot, but new radio.img and other img files i don't know.

old.splatterhand said:
Yes, thats right.
This is only for play around, until the update is here for all!
You guys must notice, that the firmware files from OTA are missing in this rom.
There is no new hboot, but new radio.img and other img files i don't know.
Click to expand...
Click to collapse
Do you have a copy of the updated firmware folder that we can play around with too?
EDIT: nevermind, I found the system dump on 4pda, let's see what we can do to get things going here.

Ok, to everyone who is using this ROM and having issues like me (which I'm assuming is probably everyone). I've figured out why bluetooth wasn't working, system/etc/dbus.conf is missing from the zip, it's not splatterhands fault as it was missing from the system dump too, as such, if you want to get it working, copy dbus.conf into your system/etc folder and reboot.
old.splatterhand, can you please patch your zip file to include this file also?

Will do, when i'm back from work. Or i upload a new version of the rom with the file.
For your previous post:
Download the OTA update and extract firmware.zip. Boot.img is also from it.
You'll find link in my index thread.
Thanks @ckpv5 for posting the HTC server link!

Works fine with Bluetooth @ K2_U (non LTE)

On k2_ul optus aus
Speakers is too noisy and bluetooth is not working

Flashed, works like a charm. Also I have flashed the radio.img, boot.img from firmware.zip and attached the patch for bluetooth. Dunno where to flash the rest of the firmware files, so I'm not trying with those. For SuperSU I have followed the instructions given by TWRP 2.6.3.0. He showed me to install supersu, then after reboot in menu I clicked SuperSU Installer and clicked TWRP, which has downloaded the supersu files. Then the installer has rebooted the phone, finished the installation in TWRP automatically and rebooted again. And I had at the end the rooted Android 4.2.2 with Sense 5.0.

Bazdir said:
Flashed, works like a charm. Also I have flashed the radio.img, boot.img from firmware.zip and attached the patch for bluetooth. Dunno where to flash the rest of the firmware files, so I'm not trying with those. For SuperSU I have followed the instructions given by TWRP 2.6.3.0. He showed me to install supersu, then after reboot in menu I clicked SuperSU Installer and clicked TWRP, which has downloaded the supersu files. Then the installer has rebooted the phone, finished the installation in TWRP automatically and rebooted again. And I had at the end the rooted Android 4.2.2 with Sense 5.0.
Click to expand...
Click to collapse
Please tell me how to get and flash radio.img ?

rJiLz said:
Please tell me how to get and flash radio.img ?
Click to expand...
Click to collapse
Get the firmware.zip from the OTA package and replace /dev/block/mmcblk0p16 on your phone with the radio.img from the firmware.zip (this is assuming you have a k2_ul) all you need to do is rename the radio.img to mmcblk0p16 and it will be correct.
Is the network usage app crashing for anyone else too? I'm trying to see if anything else is having problems and that seems to be about the only one.

i've restored to saturn III and waiting for @old.splatterhand 's custom rom on android 4.2.2

This will not come so fast and it will not solve missing firmware files.
I have uploaded v2 with dbus.conf inside, so bluetooth should work now.
Those who didn't added the file manually can download the new version.
And no, i didn't fix the noisy call sound.

So sad...
But...update radio can fix chinese ussd code ?

[FIRMWARE] Cellular radio reception FIX

Firmware for Cellular radio reception FIX
Warning
Flash at your own risk!
Check MD5 checksum before flashing!
To revert back, flash your RUU.
Introduction
I have two HTC Sensations, I found that one has a lot better reception than the other one.
The one that had better reception, I flashed a Sense 3.5 RUU beforehand.
The other one that had not so good reception, I had flashed a Sense 3.6 RUU beforehand.
Both had the 3.33 universal firmware from @Kohr-Ah installed.
I compared the firmwares from 3.33 and 3.12, I found that 3.12 has pg2fs_spcustom.img and 3.33 doesn't, I think @mike1986. removed it.
My conclusion is, pg2fs_spcustom.img must be different.
From what I know, pg2fs_spcustom.img has encrypted radio related code.
So I have repackaged the universal 3.33 firmware to include pg2fs_spcustom.img
Summary
After flashing this firmware on my HTC sensation with the one with poorer reception, I found that reception is now far better and faster to connect and switch between towers.
My results may differ from yours but I'm sharing this as it may be a solution for some.
Installation
Place PG58IMG.zip in the root directory of your sdcard.
Check the MD5 checksum is correct = [HIGHLIGHT]3abc6ae08031d3dd4c1820d2c2046c1a[/HIGHLIGHT]
Reboot device into bootloader and confirm flash.
Note:
- Remove PG58IMG.zip from root of sdcard afterwards.
- Wipe cache in recovery afterwards, if device bootloops.
Thanks
@Kohr-Ah for Universal 3.33 Firmware
@rmk40 for 3.12 Firmware
@mike1986. for Firmware Images
Download

Thanks for sharing, what's the md5sum?
Sent from my Sensation using XDA Free mobile app

tom0769 said:
Thanks for sharing, what's the md5sum?
Sent from my Sensation using XDA Free mobile app
Click to expand...
Click to collapse
It's already in OP but now it's highlighted :good:

Knowing how to read is sometimes an advantage
Sent from my Sensation using XDA Free mobile app

hinxnz said:
It's already in OP but now it's highlighted :good:
Click to expand...
Click to collapse
Hello hinxnz, you said you include this pg2fs_spcustom.img file, but there is another file also rcdata.img you put in the universal 3.33 firmware package. what is the purpose of that file. thanks

Burth67 said:
Hello hinxnz, you said you include this pg2fs_spcustom.img file, but there is another file also rcdata.img you put in the universal 3.33 firmware package. what is the purpose of that file. thanks
Click to expand...
Click to collapse
Radio Configuration Data and I didn't add it, check for yourself

hinxnz said:
Radio Configuration Data and I didn't add it, check for yourself
Click to expand...
Click to collapse
Hello hinxnz, you are right i check and rcdata.img is include, but this file pg2fs_spcustom.img i didn't find in universal 3.33 firmware package. what is the purpose for this file then. thanks

Flashing this on mine results in CarbonROM not booting up anymore (gets stuck at the boot animation). Does it need a clean flash?
Update: flashing the Italian RUU and wiping cache+dalvik makes the phone boot again normally.

Before flashing one should make a Backup because device won't boot.
After flashing firnware, remove sd card, boot into recovery, insert sd card while booting recovery.
In recovery first wipe all except sd card.
Then restore backup and reboot.
Sent from my Sensation using XDA Free mobile app

Burth67 said:
Hello hinxnz, you are right i check and rcdata.img is include, but this file pg2fs_spcustom.img i didn't find in universal 3.33 firmware package. what is the purpose for this file then. thanks
Click to expand...
Click to collapse
It contains radio operation code.
It has been quite a while since I looked at these packaged but I believe newer packages no longer included it therefore there was no reason to remove it.

TheCheshireMan said:
Flashing this on mine results in CarbonROM not booting up anymore (gets stuck at the boot animation). Does it need a clean flash?
Update: flashing the Italian RUU and wiping cache+dalvik makes the phone boot again normally.
Click to expand...
Click to collapse
Clean flash not needed but sometimes cache needs to be formatted in recovery afterwards. In my case, it was not needed.
I'd make sure /cache is formatted as ext4 before flashing firmware too.
Also you don't lose any user data by formatting cache.

I think wiping cache and dalvik cache will solve the bootloop.
Sent from my HTC Sensation 4G using Tapatalk

hinxnz said:
Clean flash not needed but sometimes cache needs to be formatted in recovery afterwards. In my case, it was not needed.
I'd make sure /cache is formatted as ext4 before flashing firmware too.
Also you don't lose any user data by formatting cache.
Click to expand...
Click to collapse
Formatting cache+dalvik after flashing makes it work, indeed. Thanks! I'd mention it in the first post, if I were you, it's kinda counterintuitive.

did not feel the difference.