Hey!
The link to the FOTA file is
http://fotadl.htc.com/OTA_Sapphire_...3.05.631.7_release_signedu2j8pjou0wsg6p6q.zip
Multiupload link http://www.multiupload.com/VLR1WRILII
You can get the RUU at http://www.multiupload.com/MG55E61MH1
And system, radio, boot and data img files (to flash from fastboot without getting a perfected SPL) are at http://dlf.transfer.ro/ruu_2.1-transfer_RO-08sep-5f012a.rar
I've checked out the update-script and the contents of the zip and...
1. It flashes a new radio - 6.35.16.19.
2. As klothius said, it needs the official 1.5 SenseUI Rogers update and the stock recovery that came with it - otherwise the MD5 verification will fail and the update will halt.
3. New kernel and new recovery. If you have an engineering SPL you can flash your favorite recovery right back after the update.
I'll probably add to this as I find out more
Can i flash this through recovery or is it a RUU? and if i can flash, i need Hero recovery new radio and spl on my 32a (also if it isn't by rogers)?
Just root it with universalandroot!
This rocks! Finally!!
@MARCO310791: I can't say, I haven't tried it yet. It looks like a stock update zip, like the ones you flash in recovery, so it might work. It works by patching the files in the official Rogers release, so it might not work on other ROMs without modification.
From what I've seen in the update-script, it doesn't touch the data partition (except a few of the files that the 1.5 update created there).
WARNING! It installs a new radio - 6.35.16.19.
Does it install new spl?
Nope, SPL is untouched.
It does, however, flash a new recovery, which means you'll need to flash a modded recovery from fastboot when it's done.
Well if that's true, we'll have root even after flashing this...although you must have a rogers rom already installed and you must have a rogers htc original stock recovery installed too.
working on it as we speak
Can anyone download the RUU? It's linked from http://www.htc.com/ca/support/h/magic-update, but it looks like the link is wrong - it just redirects to the support homepage
works fine by me
keinengel said:
Can anyone download the RUU? It's linked from http://www.htc.com/ca/support/h/magic-update, but it looks like the link is wrong - it just redirects to the support homepage
Click to expand...
Click to collapse
Link is working for me.
Edit: tried including it here, but when I click on that one I get the same result as you. Try a right-click, save-as.
http://member.america.htc.com/download/RomCode/HTC%20Magic%20(Rogers)/Magic_Rogers3.54.631.3.exe
cypis said:
http://member.america.htc.com/download/RomCode/HTC%20Magic%20(Rogers)/Magic_Rogers3.54.631.3.exe
Click to expand...
Click to collapse
Nope, still redirects back to support page
anyway i am almost done updating to make a nandroid and root it
Maybe my last edit was too late. Right-click, save-as works fine here.
capychimp said:
anyway i am almost done updating to make a nandroid and root it
Click to expand...
Click to collapse
Really??!!?? it's amazing, man. You're so fast!
I am currently running minmou final with following;
-Radio 3.22
- SPL: 1.33.2010
- Recovery: Amon_RA Recovery 1.7
I am confused, what do i need to do to install this offical update..
pls help!!
arfan1984 said:
I am currently running minmou final with following;
-Radio 3.22
- SPL: 1.33.2010
- Recovery: Amon_RA Recovery 1.7
I am confused, what do i need to do to install this offical update..
pls help!!
Click to expand...
Click to collapse
take it easy... some rom wil be there in some hours/days with this update
almost ready to make a nandroid for you to play with
In RUU there is SPL: hboot_7200A_1.76.0010_100114.nb0
Related
i tried to mod to cyanogen's v4.2.13 rom.
I REALLY NEED HELP.
im on a g1, and here is what i did
downgrade from donut 1.6 to rc29
upgrade to cupcake 1.5
installed and used "one-click root" to flash recovery image.
updated zip in recovery to v4.2.13, rebooted.
it got stuck on the G1 boot screen.
please help, i've been at it for 5 hours and this is frustrating. thanks.
lukiboix said:
i tried to mod to cyanogen's v4.2.13 rom.
I REALLY NEED HELP.
im on a g1, and here is what i did
downgrade from donut 1.6 to rc29
upgrade to cupcake 1.5
installed and used "one-click root" to flash recovery image.
updated zip in recovery to v4.2.13, rebooted.
it got stuck on the G1 boot screen.
please help, i've been at it for 5 hours and this is frustrating. thanks.
Click to expand...
Click to collapse
Ight
1), this should be n the Q&A Section (FELT SO GOOD TO SAY THAT!!)
2) Did you apply the Original G1 SPL?
G1BRICKED said:
Ight
1), this should be n the Q&A Section (FELT SO GOOD TO SAY THAT!!)
2) Did you apply the Original G1 SPL?
Click to expand...
Click to collapse
The original SPL is flashed by applying the DREAIMG.nbh (RC29) file. I would recommend wiping, then reapplying the DREAIMG.nbh.
rpcameron said:
The original SPL is flashed by applying the DREAIMG.nbh (RC29) file. I would recommend wiping, then reapplying the DREAIMG.nbh.
Click to expand...
Click to collapse
Yesh. Do it.
HTC recovery
Did you flash the Htc recovery image to get all the apps onto cyanogens rom? Im not sure but that might be the problem.
Gilbertinho said:
Did you flash the Htc recovery image to get all the apps onto cyanogens rom? Im not sure but that might be the problem.
Click to expand...
Click to collapse
Yesh I'm sure that could be the problem as well... hmmm, OP, please provide more details if you willsh?
Just go to the OP by cyanogen in his CM rom thread. And follow his guide he linked exactly.
From the steps you listed, it appears once you were rooted, you did not flash the stock or defanged 1.6 rom by HTC before you flashed CM 4.2.13.
G1BRICKED said:
Yesh I'm sure that could be the problem as well... hmmm, OP, please provide more details if you willsh?
Click to expand...
Click to collapse
Do you have a lisp or something? Just trying to figure out your dialect...
did you download both the G1 signed dream devphone userdebug ota 14721 first, and the rom last? you also frogot to wipe before flashing.
Have not tested. Found on another website.
DO NOT FLASH THIS IF YOU DON'T KNOW WHAT YOU'RE DOING - CONTAINS NEW HBOOT!
PB99IMG_Bravo_Froyo_HTCCN_CHS_CU_2.35.1402.5_Radio_32.54.00.32U_5.14.05.17_release_163341_signed.zip
MD5: BA07C0257133DDEE436B708EAA9358B7
SHA1: B0ABF605DF0720FEE52724D053289B180030E73D
CRC32: A06B1360
Direct Download: http://exd.ee/PB99IMG_Bravo_Froyo_H...4.00.32U_5.14.05.17_release_163341_signed.zip
(Backup Download)
This is fine to flash, this radio has been reported to work well
32.54.00.32U_5.14.05.17.zip
MD5: 25274049949EBE72FA7886C68A939A16
SHA1: 8AE92A3962E8E4C486C4FA62F820690AC8A5A922
CRC32: 38CBA7DA
Direct Download: http://exd.ee/32.54.00.32U_5.14.05.17.zip
(Backup Download)
radio.img
MD5: F812ACF5DD4516B7080E482DE86BD83B
SHA1: CDD0D684AEADC6AB837B7F425CED4BB5B24F8AC0
CRC32: BF609A9D
China Unicom
Flashed this revision of radio taken from other topic on my desire and it work good.
Done flashing this new Radio and its work. Will monitor other things.
Sent from my HTC Desire using XDA App
Please post the changes, if there is any.
Flashed, and till now no differences to 32.49.00.32U_5.11.05.27.
How did you install it?
When I try to flash the zip file in recovery it says it can't write the radio... never had this problem before ...
syla said:
How did you install it?
When I try to flash the zip file in recovery it says it can't write the radio... never had this problem before ...
Click to expand...
Click to collapse
Do you have 10MB cash size? If yes best way to flash radio is via cable and SDK (I've done it that way).
On alpharev.nl is written "If you downloaded Bravo Data++, please notice the /cache partition is too small to hold Radio flashes from recovery. You can however flash the radio just fine with 'fastboot flash radio radio.img'. Just extract the radio.img from the radio update.zip beforehand.
You can also download the corresponding PB99IMG zipfile, put it on your sdcard, and rename it to PB99IMG.zip. Then start the phone in HBOOT mode (VolDown+POWER) to flash the HBOOT without a PC."
Of course if you have Oxygen Hboot you have 10MB cash too.
mpmdembi said:
Do you have 10MB cash size? If yes best way to flash radio is via cable and SDK (I've done it that way).
On alpharev.nl is written "If you downloaded Bravo Data++, please notice the /cache partition is too small to hold Radio flashes from recovery. You can however flash the radio just fine with 'fastboot flash radio radio.img'. Just extract the radio.img from the radio update.zip beforehand.
You can also download the corresponding PB99IMG zipfile, put it on your sdcard, and rename it to PB99IMG.zip. Then start the phone in HBOOT mode (VolDown+POWER) to flash the HBOOT without a PC."
Of course if you have Oxygen Hboot you have 10MB cash too.
Click to expand...
Click to collapse
Ok thanks I managed to flash it in fastboot (Got oxygen hboot btw) =) will report any changes!
A new gift for the new year.
Sent from my HTC Desire using XDA App
Radio flashed few hours ago...for now it seems to work as the previous...good reception, no battery draining...to be continued
Sent from my HTC Desire GSM #Root S-OFF# OxygeN 2.0 RC5 using XDA App
Does it come with a flashable RIL?
new radio
Hello and thanks for the new radio, I just installed and seems to work fine .. I also noticed a marked improvement in signal reception and battery ...
______________________________
Rom:Alex 1.4 HD A2SD+
Recovery:AmonRa 2.0.1
Radio:32.54.00.32U_5.14.05.17
Kernel:couttstech-2.6.32.27_OC1190_CMBattFix_BFS_BFQ
SD:8Gb
______________________________
Definitely and improvement in battery for me!
Hboot 0.93.0003 in this RUU, if somebody flashes this by accident that wouldnt be good
kai84m said:
Hboot 0.93.0003 in this RUU, if somebody flashes this by accident that wouldnt be good
Click to expand...
Click to collapse
Oh dear, make sure to flash only the radio
the gps working fine after this radio update?
Someone is able to make a RIL update zip file corresponding to the new radio ?
Robert A said:
the gps working fine after this radio update?
Click to expand...
Click to collapse
Hello, I confirm the GPS works well
The RIL from the radio 32.49.00.32U_5.11.05.27 will be ok with this new radio
"system\lib\libhtc_ril.so" on system.img & "libhtc_ril.so" from RIL 32.49.00.32U_5.11.05.27 have the same MD5 SUM: 8C18D65063572954873C871EAD42039D
same results for all files included on the previous flashable RIL!
For those stuck at recovery/ haven't received the elusive OTA update / require a STOCK ROM for any valid reason, this is a PURE STOCK ODEX EUR 2.32.401.5 FIRMWARE BACKUP (ROOTED). The backup includes BOOT,SYSTEM, DATA partitons and RECOVERY.
Received OTA update to 2.31 after changing CID to HTC_Y13, restoring stock recovery, bootloader LOCK and flashing 2.2 RUU. DONOT CHANGE THE BACKUP NAME! backup dated new as it was wiped/cleaned version of my earlier 2.31 backup. Until HTC Dev releases the RUU for 2.31 update suffice with this!
This backup WON'T UPDATE your RADIO baseband or HBOOT! (chrikenn)
LINKS:
2.31 NANDROID BACKUP (TWRP)
MIRROR#1 thanks to mdiaz33685
MIRROR#2 part1
MIRROR#2 part2
Specs:
BASEBAND: 1.06es.50.02.31_10.09a.50.04L
BUILD: 2.31.401.5
HTC Sense: 4.1
Android Ver: 4.0.4
METHOD:
EXTRACT to TWRP > BACKUp folder
RESTORE from TWRP recovery
Those stuck at HTC LOGO on Boot, flash stock boot.img file as quoted below.
METHOD:
1- Reboot to HBOOT (phone turned off, press volume low and power key)
2- Choose FASTBOOT, connect your phone to PC!
3- Extract the fastboot folder attached (else extract the boot.img file to fastboot folder if exists in your PC)
4- Run CMD > cd to Fastboot folder > type fastboot flash boot boot.img
ICWS said:
Additionately I think we need a boot.img to flash, because everytime I restored a TWRP backup I had to do so. When I didn't I got stuck on boot.
Click to expand...
Click to collapse
rootrider said:
Right. If anybody needs it, he can download the boot.img offered in the viper rom thread, right under installation instructions. It's stock and can be flashed in recovery mode via 'fastboot flash boot boot.img'.
Click to expand...
Click to collapse
mughalgxt said:
For those stuck at recovery/ haven't received the elusive OTA update / require a STOCK ROM for any valid reason, this is a PURE STOCK ODEX EUR 2.32.401.5 FIRMWARE BACKUP (am unsure if its rooted, as am running ViperSROM and feel no urge to revert to stock). The backup includes BOOT,SYSTEM, DATA partitons and RECOVERY.
Received OTA update to 2.31 after changing CID to HTC_Y13, restoring stock recovery, bootloader LOCK and flashing 2.2 RUU. Hence a complete update with updated RADIO fimware (not a modded 2.31 OTA update flashed from custom recovery). DONOT CHANGE THE BACKUP NAME! backup dated new as it was wiped/cleaned version of my earlier 2.31 backup. Until HTC Dev releases the RUU for 2.31 update suffice with this!
LINK:
2.31 NANDROID BACKUP (TWRP)
Specs:
BASEBAND: 1.06es.50.02.31_10.09a.50.04L
BUILD: 2.31.401.5
HTC Sense: 4.1
Android Ver: 4.0.4
METHOD:
EXTRACT to TWRP > BACKUp folder
RESTORE from TWRP recovery
Click to expand...
Click to collapse
Thanks dude. One thing to note is that I'm pretty sure a nandroid does not restore radio or recovery. So even though it updated those things for you when you were completely stock and ran the actual OTA, I believe that anybody who flashes this nandroid will keep whatever radio and recovery they have when they flash it. If they are on hboot lower than 1.13, they can separately flash the 1.06es radio in TWRP.
should the bootloader be locked? or can i just restore this with un-locked bootloader hboot 1.13 and root?
McGiver93 said:
should the bootloader be locked? or can i just restore this with un-locked bootloader hboot 1.13 and root?
Click to expand...
Click to collapse
You are supposedly restoring this back up from recovery and long as you have a custom recovery twrp you can use this.
Additionately I think we need a boot.img to flash, because everytime I restored a TWRP backup I had to do so. When I didn't I got stuck on boot.
ok but like chrikenn said with this backup the radio won't update right?
ICWS said:
Additionately I think we need a boot.img to flash, because everytime I restored a TWRP backup I had to do so. When I didn't I got stuck on boot.
Click to expand...
Click to collapse
Besides flashing custom roms, never had to flash boot.img separately when restoring nandroid backup.
Not working for me... One S T-Mob US
once again thank you, im still outta thanks... i will get u later when they give me more thanks... hehehe............... hahahaha
juniorxdb said:
Not working for me... One S T-Mob US
Click to expand...
Click to collapse
Elaborate! YOu should have TWRP recovery not CWM or STOCK recovery.
ICWS said:
Additionately I think we need a boot.img to flash, because everytime I restored a TWRP backup I had to do so. When I didn't I got stuck on boot.
Click to expand...
Click to collapse
Right. If anybody needs it, he can download the boot.img offered in the viper rom thread, right under installation instructions. It's stock and can be flashed in recovery mode via 'fastboot flash boot boot.img'.
i have to wait 5 hours to download again... didnt work with twrp......
edit: must of been a bad download.. worked after the 2nd download
mughalgxt said:
Elaborate! YOu should have TWRP recovery not CWM or STOCK recovery.
Click to expand...
Click to collapse
I us TWRP, but stopped on HTC Logo Screen, after restored...
juniorxdb said:
I us TWRP, but stopped on HTC Logo Screen, after restored...
Click to expand...
Click to collapse
Well, than as pointed afore you have to fastboot boot.img file check 2 posts above yours.
McGiver93 said:
ok but like chrikenn said with this backup the radio won't update right?
Click to expand...
Click to collapse
YES, this backup won't update your radio or Hboot!
mughalgxt said:
YES, this backup won't update your radio or Hboot!
Click to expand...
Click to collapse
I just have to say 1 thing.... GOOD JOB... thank you so much... got everything working...
sorry i still cant thank you... i owe u some thanks.... :silly:
xda... why can we only use 8 thanks.... ridiculous..... i will see what happens tomorrow...
thanks mate but the site keeps timing out for me when I click download! Another guys flashable rom doesn't work so I thought I'd download this. I'm not going to waste my time and install 2.21 again just because the website is being a *****! I'll wait till the morning lol it's not my day. Awful Hosting site!
Need mirrors please. Download not working - timing out. OP - could you please upload somewhere else? Maybe dropbox?
mdiaz33685 said:
I just have to say 1 thing.... GOOD JOB... thank you so much... got everything working...
sorry i still cant thank you... i owe u some thanks.... :silly:
xda... why can we only use 8 thanks.... ridiculous..... i will see what happens tomorrow...
Click to expand...
Click to collapse
Its fine, it helped you acknowledged thats it!:angel:
mughalgxt said:
Its fine, it helped you acknowledged thats it!:angel:
Click to expand...
Click to collapse
wow.. igot my thanks back... gave u thanks...:good:
im uploading to dropbox... i have slow internet... i will post it once its up.. if u dont mind...
This is a thread consisting of official updates from HTC.
Update your HTC One S (VilleC2) to latest official ROM from HTC! :victory:
WARNING
I am not responsible for bricked devices
You have to have JB hboot to run JB ROMs (you can download firmware.zip from THIS post)
Click to expand...
Click to collapse
Features:
Latest official 3.19.401.101
Android 4.1.1
Sense 4+
Odex
Not modded, fully stock
Click to expand...
Click to collapse
DOWNLOAD 3.19.401.101
Installation:
Download, place on SD
Install via recovery (TWRP recommended)
Wipe cache
Flash JB kernel or stock one from zip --> /firmware.zip/boot.img
This OTA should work flashed directly on stock ICS.
BTW, I am going to make a custom ROM for VilleC2 based on that official one.
Let's make the users forget that they don't have S4 processor and plenty of custom ROMs to choose from
maxio1998 said:
BTW, I am going to make a custom ROM for VilleC2 based on that official one.
Let's make the users forget that they don't have S4 processor and plenty of custom ROMs to choose from
Click to expand...
Click to collapse
waiting for it!
Omg thanks... P.s cn we use this on stock rom
Sent from my HTC One S using xda app-developers app
Work for Cid :BSTAR301
Doesn't flash in TWRP because of simple reason:
CID check is not removed from updater script, that's first thing to do if you want to make OTA flashable.
how remove CID check
Any hope for Latin America CID: BSTAR301? HBOOT: 2.09
Does hboot 2.11 work?
Send from my Ville C2
rasputyn said:
Doesn't flash in TWRP because of simple reason:
CID check is not removed from updater script, that's first thing to do if you want to make OTA flashable.
Click to expand...
Click to collapse
Ok, I am gonna remove it, thanks
EDIT
Uploading new version
Anyone Can Post The HTC CID_044 Update of 3.19 ? i'm using the global/asia model so if anyone has it please share really appreciate it
kayserxx said:
Work for Cid :BSTAR301
Click to expand...
Click to collapse
No, it is not working in BSTAR301 [S3]
hellodzulz said:
Anyone Can Post The HTC CID_044 Update of 3.19 ? i'm using the global/asia model so if anyone has it please share really appreciate it
Click to expand...
Click to collapse
same here if u gt any info plz do tell me tooo
Hi all.
My daughter have a HTC One S S3 with ICS. We leave in Switzerland and no OTA appears in the phone until now.
The phone is damaged in the SIM card slot, so my daughter use it for games, music, chat, etc...
It's possible that I didin't receive OTA because no SIM?
Can I update manualy?
The phone is not rooted: she don't want to loose all making dev think.
Thanks for help.
When I try to flash this through TWRP, I get to "creating fota tool" (something like that) and then TWRP restarts. When I try to reboot my phone, I'm just greeted with the boot animation and then a black, unresponsive screen.
Additional info:
I downloaded the OTA update through the update software menu on my phone.
I've removed the CID check from the updater-script myself (pretty sure I edited, zipped and resigned correctly).
If I try to install the update through the update manager on my phone, it boots into TWRP and I get an error: "Can't mound INTERNALSDCARD:<OTA_Updateblahblahblah.zip>"
Any ideas?
ibupropane said:
When I try to flash this through TWRP, I get to "creating fota tool" (something like that) and then TWRP restarts. When I try to reboot my phone, I'm just greeted with the boot animation and then a black, unresponsive screen.
Additional info:
I downloaded the OTA update through the update software menu on my phone.
I've removed the CID check from the updater-script myself (pretty sure I edited, zipped and resigned correctly).
If I try to install the update through the update manager on my phone, it boots into TWRP and I get an error: "Can't mound INTERNALSDCARD:<OTA_Updateblahblahblah.zip>"
Any ideas?
Click to expand...
Click to collapse
if you have update from software update menu,
just make a full twrp backup, then install stock recovery, relock bootloader, boot phone into system, search for updates, ones it is downloaded, press installa nd it will be installed automatically.
Once its installed you can again unlock bootloader and install twrp for installing custom roms.
:/
maxio1998 said:
Ok, I am gonna remove it, thanks
EDIT
Uploading new version
Click to expand...
Click to collapse
Where is the new update without the cid check :/ its giving error..
link
http://www.androidfilehost.com/?fid=22909751817929881
Credits by mtwardowski
Does this updated version has sound bugs fixed?
seagerfreak said:
Does this updated version has sound bugs fixed?
Click to expand...
Click to collapse
yup, it fixes
Here is some candy for you guys
HTC ONE SV - Android 4.2.2 Sense 5 Rom for flashing in recovery.
I made k2u version from my backup/dump and k2ul version is made of a System Dump from russian k2ul (thanks to radarga for the dump).
I recommed TWRP recovery for flashing.
No root or Superuser inside!
This is a test version, time was to short to test everything, but it boots also on k2u and Wifi/Mobile data is working for me.
Download:
k2ul - LTE
k2ul_4.2.2_3.11.401.1_stock_odexed_v3.zip
mirror (dev-host):
k2ul_4.2.2_3.11.401.1_stock_odexed_v3.zip
k2u - Non LTE
k2u_4.2.2_3.11.401.106_stock_odexed_v1.zip
or mirror
k2u_4.2.2_3.11.401.106_stock_odexed_v1.zip
Deodexed Non-LTE version by coloured_chalk
k2u_4.2.2_3.11.401.106_DEODEXED
Installation:
Make backup and full wipe in recovery.
S-off, flash in recovery.
S-on, do the same. And unzip the boot.img from the k2ul_4.2.2_3.11.401.1_stock_odexed_v2.zip and flash with fastboot.
Don't forget to flash Superuser file (look into my index thread) if you want root!
Bugs:
- noisy sound in calls (without firmware files)
Thanks:
- to HTC for the update
- to radarga for the dump
- to bkcokota for fixing bluetooth
- to jmz for hosting
- to Seanie280672 for cwm backup
- to coloured_chalk for deodexed k2u version
Have fun.
Thank youuuuuuuuuuuuuuu!
This is a pure stock, right? That means nothing is modified or customized and everything is originally from htc?
I love you, man *_*
EDIT: ok, now I really can't wait for OTA to come! it's lovely!
alivevsdeath said:
This is a pure stock, right? That means nothing is modified or customized and everything is originally from htc?
Click to expand...
Click to collapse
Nothing modified. Only busybox files are added from radarga as i have seen now.
Notice: i can not guarantee that everything works like it should.
But it looks very promising
after update: I cannot hear the call - the speakers has problem - it's too noisy
my ussd code is Chinese
i hate Chinese, how to fix it ?
from my k2_ul
I seem to be having an issue with the phone crashing when I turn on bluetooth, can anyone replicate this issue or is it just me with it?
To those who have problems: I believe you guys should wait for the OTA to come. Maybe there are too many different types of the k2ul so you need the right update for exactly your k2ul type/serial number or something.
Malakaaa said:
To those who have problems: I believe you guys should wait for the OTA to come. Maybe there are too many different types of the k2ul so you need the right update for exactly your k2ul type/serial number or something.
Click to expand...
Click to collapse
Yes, thats right.
This is only for play around, until the update is here for all!
You guys must notice, that the firmware files from OTA are missing in this rom.
There is no new hboot, but new radio.img and other img files i don't know.
old.splatterhand said:
Yes, thats right.
This is only for play around, until the update is here for all!
You guys must notice, that the firmware files from OTA are missing in this rom.
There is no new hboot, but new radio.img and other img files i don't know.
Click to expand...
Click to collapse
Do you have a copy of the updated firmware folder that we can play around with too?
EDIT: nevermind, I found the system dump on 4pda, let's see what we can do to get things going here.
Ok, to everyone who is using this ROM and having issues like me (which I'm assuming is probably everyone). I've figured out why bluetooth wasn't working, system/etc/dbus.conf is missing from the zip, it's not splatterhands fault as it was missing from the system dump too, as such, if you want to get it working, copy dbus.conf into your system/etc folder and reboot.
old.splatterhand, can you please patch your zip file to include this file also?
Will do, when i'm back from work. Or i upload a new version of the rom with the file.
For your previous post:
Download the OTA update and extract firmware.zip. Boot.img is also from it.
You'll find link in my index thread.
Thanks @ckpv5 for posting the HTC server link!
Works fine with Bluetooth @ K2_U (non LTE)
On k2_ul optus aus
Speakers is too noisy and bluetooth is not working
Flashed, works like a charm. Also I have flashed the radio.img, boot.img from firmware.zip and attached the patch for bluetooth. Dunno where to flash the rest of the firmware files, so I'm not trying with those. For SuperSU I have followed the instructions given by TWRP 2.6.3.0. He showed me to install supersu, then after reboot in menu I clicked SuperSU Installer and clicked TWRP, which has downloaded the supersu files. Then the installer has rebooted the phone, finished the installation in TWRP automatically and rebooted again. And I had at the end the rooted Android 4.2.2 with Sense 5.0.
Bazdir said:
Flashed, works like a charm. Also I have flashed the radio.img, boot.img from firmware.zip and attached the patch for bluetooth. Dunno where to flash the rest of the firmware files, so I'm not trying with those. For SuperSU I have followed the instructions given by TWRP 2.6.3.0. He showed me to install supersu, then after reboot in menu I clicked SuperSU Installer and clicked TWRP, which has downloaded the supersu files. Then the installer has rebooted the phone, finished the installation in TWRP automatically and rebooted again. And I had at the end the rooted Android 4.2.2 with Sense 5.0.
Click to expand...
Click to collapse
Please tell me how to get and flash radio.img ?
rJiLz said:
Please tell me how to get and flash radio.img ?
Click to expand...
Click to collapse
Get the firmware.zip from the OTA package and replace /dev/block/mmcblk0p16 on your phone with the radio.img from the firmware.zip (this is assuming you have a k2_ul) all you need to do is rename the radio.img to mmcblk0p16 and it will be correct.
Is the network usage app crashing for anyone else too? I'm trying to see if anything else is having problems and that seems to be about the only one.
i've restored to saturn III and waiting for @old.splatterhand 's custom rom on android 4.2.2
This will not come so fast and it will not solve missing firmware files.
I have uploaded v2 with dbus.conf inside, so bluetooth should work now.
Those who didn't added the file manually can download the new version.
And no, i didn't fix the noisy call sound.
So sad...
But...update radio can fix chinese ussd code ?