i tried to mod to cyanogen's v4.2.13 rom.
I REALLY NEED HELP.
im on a g1, and here is what i did
downgrade from donut 1.6 to rc29
upgrade to cupcake 1.5
installed and used "one-click root" to flash recovery image.
updated zip in recovery to v4.2.13, rebooted.
it got stuck on the G1 boot screen.
please help, i've been at it for 5 hours and this is frustrating. thanks.
lukiboix said:
i tried to mod to cyanogen's v4.2.13 rom.
I REALLY NEED HELP.
im on a g1, and here is what i did
downgrade from donut 1.6 to rc29
upgrade to cupcake 1.5
installed and used "one-click root" to flash recovery image.
updated zip in recovery to v4.2.13, rebooted.
it got stuck on the G1 boot screen.
please help, i've been at it for 5 hours and this is frustrating. thanks.
Click to expand...
Click to collapse
Ight
1), this should be n the Q&A Section (FELT SO GOOD TO SAY THAT!!)
2) Did you apply the Original G1 SPL?
G1BRICKED said:
Ight
1), this should be n the Q&A Section (FELT SO GOOD TO SAY THAT!!)
2) Did you apply the Original G1 SPL?
Click to expand...
Click to collapse
The original SPL is flashed by applying the DREAIMG.nbh (RC29) file. I would recommend wiping, then reapplying the DREAIMG.nbh.
rpcameron said:
The original SPL is flashed by applying the DREAIMG.nbh (RC29) file. I would recommend wiping, then reapplying the DREAIMG.nbh.
Click to expand...
Click to collapse
Yesh. Do it.
HTC recovery
Did you flash the Htc recovery image to get all the apps onto cyanogens rom? Im not sure but that might be the problem.
Gilbertinho said:
Did you flash the Htc recovery image to get all the apps onto cyanogens rom? Im not sure but that might be the problem.
Click to expand...
Click to collapse
Yesh I'm sure that could be the problem as well... hmmm, OP, please provide more details if you willsh?
Just go to the OP by cyanogen in his CM rom thread. And follow his guide he linked exactly.
From the steps you listed, it appears once you were rooted, you did not flash the stock or defanged 1.6 rom by HTC before you flashed CM 4.2.13.
G1BRICKED said:
Yesh I'm sure that could be the problem as well... hmmm, OP, please provide more details if you willsh?
Click to expand...
Click to collapse
Do you have a lisp or something? Just trying to figure out your dialect...
did you download both the G1 signed dream devphone userdebug ota 14721 first, and the rom last? you also frogot to wipe before flashing.
Related
UPDATE: revision 2! http://www.droiddeveloper.com/hrbuilds/ionr2-sapphire-signed.zip
will add languages tomorrow.
this build updates kernel and adds wifi-tether support.
Whats the difference between this one and the one I put out yesterday?
Does this rom support Apps2sd unionfs?
Disconn3ct said:
Whats the difference between this one and the one I put out yesterday?
Click to expand...
Click to collapse
this post was deleted.
Have tried flashing this but it's stuck at the Android. It goes through the update fine followed by the Vodafone splash then sits at the Android.
I am missing something?
I have a rooted UK Magic on CRB17 with the signed spl and new recovery utility.
BigRD said:
Have tried flashing this but it's stuck at the Android. It goes through the update fine followed by the Vodafone splash then sits at the Android.
I am missing something?
I have a rooted UK Magic on CRB17 with the signed spl and new recovery utility.
Click to expand...
Click to collapse
Did you wipe?
Disconn3ct said:
Did you wipe?
Click to expand...
Click to collapse
Doh!!
I have now
It's installed fine now. Thanks
diferences betwen Sapphire 6.0 Port and Google Ion Rom ?
Thx Haykuro !
Please some one tell me how to wipe?
janjan said:
Please some one tell me how to wipe?
Click to expand...
Click to collapse
I can answer this one
Reboot into the updated recovery utility and select Wipe then you can go straight to update.
nice thank you. (Reboot into the updated recovery utility) you mean just Reboot into recovery mode (HOME+POWER) and then update from sdcard.
1. Copy to sd card as "update.zip"
2. Reboot into recovery mode (HOME+POWER)
3. DO A NANDROID BACKUP (option with ALT+B beside it)
4. Wipe (option that has [ALT+W] beside it)
5. Apply update (option with [ALT+S] beside it)
6. Reboot (HOME+BACK)
Am I right?
Yes that's the one
Home+Power and you will find Reboot, Update, Wipe and Console.
ok thank you very much. would you please tell me any different b/w vodafon and this new rom?
And what about speed?
Original Vodafone: 8/10
Haykuro 6.0r2: 4/10
Google Ion: ?/10
I have the Ion rom on the G1. Myself and others have reported it to be the fastest one yet. 11/10
The Google ION rom is indeed the fastest rom yet. What they did to make it so fast I have no idea but I aint complaining.
I guess i'll be the first to submit a bug with this firmware. I know yall hate me now I notice that now my wifi doesnt work. Prior to this I had the straight from Google ION rom which worked fine with wifi but after this one I am getting an unable to start wifi error. Any ideas anyone?
And btw thanks for being so quick about these things Haykuro. You rock brother!
just installed Google Ion ROM without "wipe".
is definitely quicker,and it close apps much faster then before and wifi is working..
thank to Haykuro for the signed rom
Not Multi Language ?
Thanks for the ROM, waiting for spanish language to instal it
fridlack said:
Thanks for the ROM, waiting for spanish language to instal it
Click to expand...
Click to collapse
Same here.
Nice work Haykuro
Hi, So I purchased a rooted HTC magic off craiglist.
It is a HTC sapphire 32A (Rogers HTC Magic) running CursorSense32A-1.2.6.1 ...So it worked fine for a couple of months . Than one day it started rebooting when i put in another rogers sim card ..i took out the sim and put the phone to charge ..
i take a shower and come back but when i open the phone it gets frozen at the first splash/boot screen .. Now i know this phone is not bricked as I can go into BOTH Fastboot mode and what i presume to be recovery mode.
Can some one help me to make this phone functional again? I'm a total noob at this stuff right now..
Oh and Can I just download the official Rogers update and be okay? or would that brick my phone? because of changed spl and radios .. If someone wants i can take pictures/video of the phone in fastboot and recovery mode so they get most information ..
I cant live another day without my phone =(
when you go to recovery what does it say? doest it have wipe options?
You should write down the information visible at the HBoot screen and consider putting into your default signature going forward, just to make it easier.
You haven't yet provided information about which radio, SPL or ROM you're using, so help will have to wait until you do. Include the version names of the last two significant changes you made. I myself have gotten into the Rogers splash screen lock-up scenario after wiping, then changing ROMs and omitting preinstallation of the "DRC83_base_defanged.zip" before ROM and kernel patch reinstallation.
The question of how changing SIM cards might provoke this flash screen lock-up is very interesting, though.
Using the Rogers update is a bit risky. You should consult those threads that have discussion about that particular topic, and tread carefully.
Ok i took some pictures of the recovery and fastboot screens
http://img6.imageshack.us/i/img0075ii.jpg/
My SPL is probably SPL 1.76.2007 and radio is 6.35.07.29 OR HIGHER
whoops image is sorta too big ...sorry guys
here is the recover mode screen
http://img215.imageshack.us/i/img0082cv.jpg/
HassanZafar said:
Ok i took some pictures of the recovery and fastboot screens
My SPL is SPL 1.76.2007 and radio is 6.35.10.18
Click to expand...
Click to collapse
and your recovery?
oh, pic didn't show, lol AR 1.5.2 is a good thing, you have anything you need to save on sd card? or on phone? flash rom again after wiping all in the wipe menu.
and you are certain it will work ? ..Also do i need to flash the same rom or can i just do the official rogers one?
Thanks man you are ignting hope in me!
actually try a re-flash of the rom without a wipe and try and boot
look for the official rooted rom from cursordroid if you wish, both the rom you have and that one are cursordroids
do not use the rogers update whatever you do, never ever....
carz12 said:
actually try a re-flash of the rom without a wipe and try and boot
Click to expand...
Click to collapse
ok .. ive never really flashed anything in my life but the idea is that you put the file in the sd card go on the recovery screen and select "flash files from sd card" ?
I got the phone without an sd card and i know while rooting you have to do some changes to the card .. do i have to also?
HassanZafar said:
ok .. ive never really flashed anything in my life but the idea is that you put the file in the sd card go on the recovery screen and select "flash files from sd card" ?
I got the phone without an sd card and i know while rooting you have to do some changes to the card .. do i have to also?
Click to expand...
Click to collapse
nope just a formated card will do
Ok I found this video demonstrating how to load a rom is it accurate?
http://theunlockr.com/2009/08/29/how-to-load-a-custom-rom-on-your-htc-magic/
thanks man you guys have been alot of help
HassanZafar said:
Ok I found this video demonstrating how to load a rom is it accurate?
http://theunlockr.com/2009/08/29/how-to-load-a-custom-rom-on-your-htc-magic/
thanks man you guys have been alot of help
Click to expand...
Click to collapse
you dont have to do step one, no apps to sd or ext needed for cursors roms, just put rom on sd, go to recovery, flash from sd, reboot
if its no boot do the wipe first, you loose data but will for sure work unless you have a hardware problem
carz12 said:
if its no boot do the wipe first, you loose data but will for sure work unless you have a hardware problem
Click to expand...
Click to collapse
thank you man, you are a hero ..and off the top of your head which rom is the most ,stable and reliable? CursorSense?
HassanZafar said:
thank you man, you are a hero ..and off the top of your head which rom is the most ,stable and reliable? CursorSense?
Click to expand...
Click to collapse
yes because it is just a rooted version of the rogers update for magics
carz12 said:
yes because it is just a rooted version of the rogers update for magics
Click to expand...
Click to collapse
all right so i just download
CursorSense32A-1.2.6.1 Incremental Update / MD5SUM
REQUIRES 1.2.4 be installed first.
from
http://forum.xda-developers.com/showthread.php?t=592856
than wipe and flash!
oh and on his thread he says "Flash through FASTBOOT" is that necessary or is it just for the first time?
sorry for asking so many question i just wanna make sure
HassanZafar said:
all right so i just download
CursorSense32A-1.2.6.1 Incremental Update / MD5SUM
REQUIRES 1.2.4 be installed first.
from
http://forum.xda-developers.com/showthread.php?t=592856
than wipe and flash!
oh and on his thread he says "Flash through FASTBOOT" is that necessary or is it just for the first time?
sorry for asking so many question i just wanna make sure
Click to expand...
Click to collapse
you already have all the fastboot parts done, just the flash rom part
flash the full rom and then flash the update, no reboot between
you can also flash the apps now too if you like with out reboot, just put all 3 on card and go
I took hboot 0.76.2000 from toast's root nand unlock part2 and put it in a new PC36IMG, so that those who installed unrevoked forever can get the extended fastboot commands back.
NOTE: This is only for unrevoked forever users.
Tested to work if flashed from hboot (bootloader)
Not tested in recovery.
NOTE 2: Make a nandroid backup.
Place file on root of sdcard, power off your phone, then power on your phone by holding volume+down and pressing+holding the power button until the white bootloader appears. Press volume up once asked to install the bootloader.
NOTE 3: For those experiencing being stuck in bootloader, you can boot into recovery, flash your current ROM again, (without data wiping) OR just restore a nandroid backup. Flashing a custom kernel will also get you out of the loop. I'm going to go ahead and assume flashing anything other than hboot iwll get you out of the loop.
This will NOT wipe your device, however, backing up is always recommended.
UPDATE: It appears as though everyone is getting stuck in bootloader after this procedure. You can get out of this by reflashing your current ROM (without wiping) and/or restore a nandroid backup. Some have reported errors when trying to restore a nandroid backup. YMMV
Karadorde has put together a package that works. Read his instructions below:
First and foremost it seems that if you get stuck in the Bootloader (no matter what method you are using) then your Nandroid backups are broken. I don't know that anyone has been able to successfully restore from one of those yet.
The file in the OP allows you to apply just the engineering HBOOT.img (hboot_0.76.2000.img) This works flawlessly for some but not so well for others.
The file in Post 71 and Post 91 allows you to apply a full PC36IMG.zip that contains the engineering HBOOT.img (hboot_0.76.2000.img) This is a fix for some who have gotten stuck in the Bootloader after using the file from the OP. At the same time this has also caused the some of the same issues people were having with getting stuck in the Bootloader from the OP. This file will not downgrade any part of your phone, however, it will wipe the phone. Also it is reported that it broke root on one phone. I believe this only happened to one person, need confirmation on if it happened to multiple.
If you get stuck in the Bootloader you can re-flash your Kernel to fix the issue. Not sure if this works with the stock Kernel or if you have to have a custom Kernel. Looking for feedback on this.
If you get stuck in the Bootloader reflash your current rom. Need feedback on this as well.
Link to Karadorde's updated package: http://www.freeza-inc.com/PC36IMG.zip
Here's the recovery flashable version that I made a while ago
Calkulin said:
Here's the recovery flashable version that I made a while ago
Click to expand...
Click to collapse
Nice. had no idea you made it
Guess I should have searched last night lol.
freeza said:
Nice. had no idea you made it
Guess I should have searched last night lol.
Click to expand...
Click to collapse
Well I made it but never posted it as there was no way of flashing it unless you had the ENG hboot to begin with
anyway of having 79.00 with the commands?
I'm sorry op but its surely going to be asked so might as get it out quickly lol
Exactly what commands are missing?
rjmjr69 said:
anyway of having 79.00 with the commands?
I'm sorry op but its surely going to be asked so might as get it out quickly lol
Exactly what commands are missing?
Click to expand...
Click to collapse
He's talking about the fastboot commands, the commands you run when you reboot your phone and set your as "fastboot". Here's some commands you've probably seen if you've tried flashing a custom kernel:
Code:
fastboot flash zimage zImage
fastboot reboot
pseudoremora said:
He's talking about the fastboot commands, the commands you run when you reboot your phone and set your as "fastboot". Here's some commands you've probably seen if you've tried flashing a custom kernel:
Code:
fastboot flash zimage zImage
fastboot reboot
Click to expand...
Click to collapse
Adding on to this, you probably only need fastboot commands if you're planning on doing some serious rom development.
sk63 said:
Adding on to this, you probably only need fastboot commands if you're planning on doing some serious rom development.
Click to expand...
Click to collapse
Thanks for answering
one slight thing I am confused on now with unrevoked forever available.
Is it possible to flash the ENG boot without changing the PRI ?
for example:
- stock 2.1 evo / 1.40 pri
- unrevoked 3 + unrevoked forever
- still on 1.40 pri
- flash ENG boot without 1.34 pri, leaving the 1.40 pri
?
I would like to know the same thing.
-frank
Sent from my PC36100 using XDA App
TeknoJnky said:
one slight thing I am confused on now with unrevoked forever available.
Is it possible to flash the ENG boot without changing the PRI ?
for example:
- stock 2.1 evo / 1.40 pri
- unrevoked 3 + unrevoked forever
- still on 1.40 pri
- flash ENG boot without 1.34 pri, leaving the 1.40 pri
?
Click to expand...
Click to collapse
kaediil said:
I would like to know the same thing.
-frank
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
yes, it is.
Can this be reversed? Do you have the 79.00 to flash back?
rjmjr69 said:
Can this be reversed? Do you have the 79.00 to flash back?
Click to expand...
Click to collapse
I can extract it from an official RUU.
freeza said:
I can extract it from an official RUU.
Click to expand...
Click to collapse
Ok but will the phone still be unlocked via unrevokedforever?
rjmjr69 said:
Ok but will the phone still be unlocked via unrevokedforever?
Click to expand...
Click to collapse
yes, it will.
freeza said:
yes, it will.
Click to expand...
Click to collapse
Cool I would like that very much please thanks sir
rjmjr69 said:
Cool I would like that very much please thanks sir
Click to expand...
Click to collapse
here you go.
freeza said:
here you go.
Click to expand...
Click to collapse
You seem in the know, so I'm asking you... I ran unrevoked forever, it said it was successful, but my HBOOT stayed as ENG HBOOT .76. Is that correct or did I screw up unrevoked somehow?
Thanks for this. I flashed the wrong damned pc36img.zip (thought I was flashing the one that had rooted 1.47) to get back to a sense rom from cm6 to do the pri hackery and had upgraded hboot.
Now that my pri's fixed I'd rather have S-OFF and the engineering hboot than sit here and reset my phone another 20ish times to get 1.40 pri back after re-flashing the engineering image!
freeza said:
here you go.
Click to expand...
Click to collapse
So this is the same file that it ends up with when you run unrevokedforever?
Does it say s-on or off?
Hey!
The link to the FOTA file is
http://fotadl.htc.com/OTA_Sapphire_...3.05.631.7_release_signedu2j8pjou0wsg6p6q.zip
Multiupload link http://www.multiupload.com/VLR1WRILII
You can get the RUU at http://www.multiupload.com/MG55E61MH1
And system, radio, boot and data img files (to flash from fastboot without getting a perfected SPL) are at http://dlf.transfer.ro/ruu_2.1-transfer_RO-08sep-5f012a.rar
I've checked out the update-script and the contents of the zip and...
1. It flashes a new radio - 6.35.16.19.
2. As klothius said, it needs the official 1.5 SenseUI Rogers update and the stock recovery that came with it - otherwise the MD5 verification will fail and the update will halt.
3. New kernel and new recovery. If you have an engineering SPL you can flash your favorite recovery right back after the update.
I'll probably add to this as I find out more
Can i flash this through recovery or is it a RUU? and if i can flash, i need Hero recovery new radio and spl on my 32a (also if it isn't by rogers)?
Just root it with universalandroot!
This rocks! Finally!!
@MARCO310791: I can't say, I haven't tried it yet. It looks like a stock update zip, like the ones you flash in recovery, so it might work. It works by patching the files in the official Rogers release, so it might not work on other ROMs without modification.
From what I've seen in the update-script, it doesn't touch the data partition (except a few of the files that the 1.5 update created there).
WARNING! It installs a new radio - 6.35.16.19.
Does it install new spl?
Nope, SPL is untouched.
It does, however, flash a new recovery, which means you'll need to flash a modded recovery from fastboot when it's done.
Well if that's true, we'll have root even after flashing this...although you must have a rogers rom already installed and you must have a rogers htc original stock recovery installed too.
working on it as we speak
Can anyone download the RUU? It's linked from http://www.htc.com/ca/support/h/magic-update, but it looks like the link is wrong - it just redirects to the support homepage
works fine by me
keinengel said:
Can anyone download the RUU? It's linked from http://www.htc.com/ca/support/h/magic-update, but it looks like the link is wrong - it just redirects to the support homepage
Click to expand...
Click to collapse
Link is working for me.
Edit: tried including it here, but when I click on that one I get the same result as you. Try a right-click, save-as.
http://member.america.htc.com/download/RomCode/HTC%20Magic%20(Rogers)/Magic_Rogers3.54.631.3.exe
cypis said:
http://member.america.htc.com/download/RomCode/HTC%20Magic%20(Rogers)/Magic_Rogers3.54.631.3.exe
Click to expand...
Click to collapse
Nope, still redirects back to support page
anyway i am almost done updating to make a nandroid and root it
Maybe my last edit was too late. Right-click, save-as works fine here.
capychimp said:
anyway i am almost done updating to make a nandroid and root it
Click to expand...
Click to collapse
Really??!!?? it's amazing, man. You're so fast!
I am currently running minmou final with following;
-Radio 3.22
- SPL: 1.33.2010
- Recovery: Amon_RA Recovery 1.7
I am confused, what do i need to do to install this offical update..
pls help!!
arfan1984 said:
I am currently running minmou final with following;
-Radio 3.22
- SPL: 1.33.2010
- Recovery: Amon_RA Recovery 1.7
I am confused, what do i need to do to install this offical update..
pls help!!
Click to expand...
Click to collapse
take it easy... some rom wil be there in some hours/days with this update
almost ready to make a nandroid for you to play with
In RUU there is SPL: hboot_7200A_1.76.0010_100114.nb0
Hey,
I'm new to Android, and still pretty bad with it, so when I set out to flash a custom rom last week, I never bothered to setup a backup. I didn't think it was going to be as complicated to get back to the way it was when I took it out of the box. I guess I'm still use to the iPhone. Now, I'm not completely happy with my phone and am looking to go back to stock.
I've looked in to it, and it seems easy enough, but I just have a couple of questions:
Pre-CM7 I'm pretty sure my phone was GRI54, and i9020, It's now GRI40. Does this make any difference?
And, finally, where can I download an official version of this?
Any help is greatly appreciated,
Thanks.
Have a look at this thread: http://forum.xda-developers.com/showthread.php?t=1056062
Graham19 said:
Have a look at this thread: http://forum.xda-developers.com/showthread.php?t=1056062
Click to expand...
Click to collapse
I've downloaded the i9020a one, but when I'm trying to update it it's saying "Installation aborted". I tried doing it from clockwork mod - and I don't know anything about it. Do you know where I'm going wrong here?
tylerisgood said:
I've downloaded the i9020a one, but when I'm trying to update it it's saying "Installation aborted". I tried doing it from clockwork mod - and I don't know anything about it. Do you know where I'm going wrong here?
Click to expand...
Click to collapse
Use the unofficial full rom for the i9020a. apply it from cwm. Then wipe the phone
Sent from my Nexus S
Matridom said:
Use the unofficial full rom for the i9020a. apply it from cwm. Then wipe the phone
Sent from my Nexus S
Click to expand...
Click to collapse
Do you know where I can get this download from?
I haven't been able to find anything for this. The closest I found was someone saying 'use this one instead', but that got me stuck at the Google screen.
tylerisgood said:
Do you know where I can get this download from?
I haven't been able to find anything for this. The closest I found was someone saying 'use this one instead', but that got me stuck at the Google screen.
Click to expand...
Click to collapse
It is in my sticky for the 2.3.4 ota. Very first post
Sent from my Nexus S
Matridom said:
It is in my sticky for the 2.3.4 ota. Very first post
Sent from my Nexus S
Click to expand...
Click to collapse
Sorry, maybe I'm doing something wrong, but I've tried using that zip a few times (286d814dee5b.signed-sojua-GRJ22-from-GRI54.286d814d.zip 12mb) and it says install failed.
I boot into recovery, factory reset, wipe cache, install zip from sd card, pick the file, agree.
Have you checked the MD5 hash to ensure the download isn't corrupt?
Graham19 said:
Have you checked the MD5 hash to ensure the download isn't corrupt?
Click to expand...
Click to collapse
I'm incredibly new to this, and have no idea what this means. How do I try this?
Download this:
http://myunspace.com/?d=4DD679381
Install it through CWM
Wipe the phone
you now have stock 2.3.4
Matridom said:
Download this:
http://myunspace.com/?d=4DD679381
Install it through CWM
Wipe the phone
you now have stock 2.3.4
Click to expand...
Click to collapse
I love you. Thanks a lot
One last quick question:
Is it possible to get rid of clockwork?
tylerisgood said:
One last quick question:
Is it possible to get rid of clockwork?
Click to expand...
Click to collapse
yes, the default for all stock 2.3.4 roms will restore the recover back to stock on each reboots you have to rename/delete the install-recover.sh script to prevent it from happening
Matridom said:
yes, the default for all stock 2.3.4 roms will restore the recover back to stock on each reboots you have to rename/delete the install-recover.sh script to prevent it from happening
Click to expand...
Click to collapse
Sorry? I have to delete the files to keep clockwork from being removed?
All I did was flash it, restart, and clockwork was still there.
Also, my phone's internet speeds seem really slow now. Could this be from now having a different build? (GRI54 -> GRJ22)
Sorry for my complete lack of knowledge. It's quite obvious I jumped into something that's much over my head.
tylerisgood said:
Sorry? I have to delete the files to keep clockwork from being removed?
All I did was flash it, restart, and clockwork was still there.
Also, my phone's internet speeds seem really slow now. Could this be from now having a different build? (GRI54 -> GRJ22)
Sorry for my complete lack of knowledge. It's quite obvious I jumped into something that's much over my head.
Click to expand...
Click to collapse
A stock rom has the script. So flashing it will also restore stock recovery. If the rom you installed does not restore the recovery partition, the the rom was not completely stock.
Sent from my Nexus S
Matridom said:
A stock rom has the script. So flashing it will also restore stock recovery. If the rom you installed does not restore the recovery partition, the the rom was not completely stock.
Sent from my Nexus S
Click to expand...
Click to collapse
I used the rom you linked.
tylerisgood said:
I used the rom you linked.
Click to expand...
Click to collapse
I've never used it myself.
Looking over the zip file, the script has been renamed, so it's not 100% stock.
Normally you would need to root the phone to change the file name.
Perhaps renaming the file in the zip will correct the issue?
try renaming /etc/install-recovery.sh.bak to /etc/install-recovery.sh and re-apply the zip. ( no need to wipe )
That rom was posted by dsixda, he may be able to confirm what needs to be done.
If you had root, it would be fairly easy to rename it.
Matridom said:
Download this:
http://myunspace.com/?d=4DD679381
Install it through CWM
Wipe the phone
you now have stock 2.3.4
Click to expand...
Click to collapse
That was my upload, but is it confirmed that the radio in this one gets flashed to AUCKD2? I uploaded another one with the same radio but slightly different.
Matridom said:
Download this:
http://myunspace.com/?d=4DD679381
Install it through CWM
Wipe the phone
you now have stock 2.3.4
Click to expand...
Click to collapse
This doesn't seem to work. It does gets you back to stock rom but I still have the old modem I flashed, old APN, CWM Recovery and still there and factory reset doesn't works. Just hangs with the little Android guy and an exclamation mark.
Is there something like ODIN for Nexus S to go back to stock?
SpoonerPS3 said:
This doesn't seem to work. It does gets you back to stock rom but I still have the old modem I flashed, old APN, CWM Recovery and still there and factory reset doesn't works. Just hangs with the little Android guy and an exclamation mark.
Is there something like ODIN for Nexus S to go back to stock?
Click to expand...
Click to collapse
This should work:
http://android.grdlock.net/index.ph... S&PHPSESSID=9dc0c107b878587d1e0b21ec1e3130ef
This should bring you to stock 2.3.3 for the i9020a
Then apply the official patch:
http://android.clients.google.com/p...5b.signed-sojua-GRJ22-from-GRI54.286d814d.zip
This will then bring everything to stock 2.3.4 with proper baseband and recovery