[Q] HTC Sense UI stops working very often. How to fix it? - HTC Sensation

Hello
Phone: Sensation XE, 4.0.3 Android, 3.6 UI, Stock ROM, Locked (unROOTed)
So, I'm having a problem with my UI in HTC - it stops working very often. Usually when I'm unplugging the USB cable or changing the mode to Charge only.
I can root the phone and install custom ROM but I don't want to lose all the files [or if you guys can give me some program to back up my stuff, so I could put it on my PC]. Everything is ready to do it (the chinese program to root the phone and the vipers custom ROM is already on my SD card [dont even know if i will lose it after rooting).
But will it help to fix the problem? Because I was thinking that if the UI stops working, so maybe I have to install new one (4.1 included in Vipers ROM, i guess).
And by the way, can you tell me when I would loose the files? (wile rooting or installing the ROM?)
Cheers, Michael.

if you follow the S-OFF procedure backup all your contents from your sdcard to the pc
when you root after S-OFF you sdcard will be untouched
also when you flash the rom will be again untouched

rzr86 said:
if you follow the S-OFF procedure backup all your contents from your sdcard to the pc
when you root after S-OFF you sdcard will be untouched
also when you flash the rom will be again untouched
Click to expand...
Click to collapse
What do you mean by S-OFF?

NexxeR121 said:
What do you mean by S-OFF?
Click to expand...
Click to collapse
when you do S-OFF you unlock all device's partitions
then you can root and flash a custom recovery
see here http://forum.xda-developers.com/showthread.php?t=1661631
by the way how were you going to root it?

The program is called ZhuoDaShi. I accidentally uninstalled the program, because everything is in chinese LOL! I thought I'm launching the program.
But do you think i should download this program again or I shouldn't be bothered and pick different one? (Maybe you could give it)
About the S-OFF, will my 32GB SD card be ok with it?

NexxeR121 said:
The program is called ZhuoDaShi. I accidentally uninstalled the program, because everything is in chinese LOL! I thought I'm launching the program.
But do you think i should download this program again or I shouldn't be bothered and pick different one? (Maybe you could give it)
About the S-OFF, will my 32GB SD card be ok with it?
Click to expand...
Click to collapse
you will be fine with 32gb sdcard
about program there all there in the link i sent you in my previous post
pay attention to prerequisites
but before starting the procedure backup your files from sdcard to pc
best wishes

Hi there again.
I've got a problem with rooting the phone.
So, my phone is S-OFF (it says in hboot) and its locked.
My problem is that I can't unlock it. I have downloaded super user (su-2.3.6.3-efgh-signed.zip) and i installed it through hboot/recovery and it installed everything, but i still dont have root rights and in hboot menu it says S-OFF ... LOCKED
Have I done something wrong?

NexxeR121 said:
Hi there again.
I've got a problem with rooting the phone.
So, my phone is S-OFF (it says in hboot) and its locked.
My problem is that I can't unlock it. I have downloaded super user (su-2.3.6.3-efgh-signed.zip) and i installed it through hboot/recovery and it installed everything, but i still dont have root rights and in hboot menu it says S-OFF ... LOCKED
Have I done something wrong?
Click to expand...
Click to collapse
no you are fine now
completely unlocked
ignore the locked situation
you can flash a patched hboot.see here
http://forum.xda-developers.com/showthread.php?t=1459767
flash 3.33 universal
it has instructions on how to flash it
and before flashing check md5 sums
about root flash this from recovery
http://download.chainfire.eu/315/SuperSU/UPDATE-SuperSU-v1.25.zip
then see if you have root access

MD5?
I searched internet for it... Still dont know. But Ive donwloaded MD5 Checker and there are 2 options: file 1-file 2 ::and:: text - MD5 / MD5 - text
What should I be looking at?
EDIT:
OK, wait. I know whats MD5 (a bit). So i checked the code from the file i have downloaded - the firmware. It should be same as my firmware?
If so... how can I take my firmware and put it on the pc to check it in the program?

NexxeR121 said:
MD5?
I searched internet for it... Still dont know. But Ive donwloaded MD5 Checker and there are 2 options: file 1-file 2 ::and:: text - MD5 / MD5 - text
What should I be looking at?
EDIT:
OK, wait. I know whats MD5 (a bit). So i checked the code from the file i have downloaded - the firmware. It should be same as my firmware?
If so... how can I take my firmware and put it on the pc to check it in the program?
Click to expand...
Click to collapse
do this
put the firmware zip into the root of your sdcard
then from your device use any file manager you have and navigate to that zip
press and hold in that zip until it pops up a menu
go to properties and select calculate md5 checksum or something like that
then see if it matches with the one from firmware's thread

can I ask a very nooby question?
my steps of which files I should install now are;
1. hboot that u gave me link
2. flash 3.33 - same link
3. another link with super user after installing the files before ?
ok I checked the md5 for flash 3.33 on my phone - its the same as given on the forum
so I should just install it step by step with points that I showed you?
once again, sorry for that question, shouldn't waist Ur time

I still need help! Please
Sent from my HTC Sensation XE with Beats Audio Z715e using xda app-developers app

NexxeR121 said:
can I ask a very nooby question?
my steps of which files I should install now are;
1. hboot that u gave me link
2. flash 3.33 - same link
3. another link with super user after installing the files before ?
ok I checked the md5 for flash 3.33 on my phone - its the same as given on the forum
so I should just install it step by step with points that I showed you?
once again, sorry for that question, shouldn't waist Ur time
Click to expand...
Click to collapse
hi, mate sorry for the late
so if you say that md5 sums are matching then:
flash 3.33 firmware.it will take care too for the patched hboot
after that flash the superuser zip from recovery
done

No worrys. Thanks.
I'm just changing to other sd - I have all root files needed on it.
Tell me, why do I need to flash those 2 files (3.33 and su-update) if I already made the root?
But there's one more question bothering me; how can md5 be different on other devices IF its still the same file?
And how should I know if my md5 is different if other users don't give md5 to their files?
I think it was the last question.
Many thanks and best wishes

NexxeR121 said:
No worrys. Thanks.
I'm just changing to other sd - I have all root files needed on it.
Tell me, why do I need to flash those 2 files (3.33 and su-update) if I already made the root?
But there's one more question bothering me; how can md5 be different on other devices IF its still the same file?
And how should I know if my md5 is different if other users don't give md5 to their files?
I think it was the last question.
Many thanks and best wishes
Click to expand...
Click to collapse
the 3.33fw gives you also patced hboot as i said
that means you can perform fastboot commands(with locked bootloader you can't)
if you are already rooted then don't use the su zip
1)i don't know.the only thing i know is if you modify a zip file then the md5 is changing too
2)especially in firmware thread it will always give md5 sums for matching because if it is different(bad download or corrypted file)
the device will probably bricked
now if you have installed a recovery try to flash a custom rom
all custom roms comes already rooted

Ok. In hboot it says firmware 3.33
But I still don't have root rights.
What I should do now is install the:
1. Su update (that you gave me) - through; hboot, racovery, install zip files
And if I will have root rights
2. Install custom rom - the same way as step one
AND ALL OF IT WITHOUT CLEARING SD CARD AND MOBILE?
Sent from my HTC Sensation XE with Beats Audio Z715e using xda app-developers app

Should I do it?
Sent from my HTC Sensation XE with Beats Audio Z715e using xda app-developers app

NexxeR121 said:
Should I do it?
Sent from my HTC Sensation XE with Beats Audio Z715e using xda app-developers app
Click to expand...
Click to collapse
yeap try to flash su file from recovery
then see if you have root permissions
otherwise flash a custom rom(thet are pre-rooted as i mentioned before)
follow these steps for flashing rom
1)backup your current rom just in case(nandroid backup)
2)format all partitions except sdcard
3)flash the rom
done
by the way what recovery did you install?

rzr86 said:
yeap try to flash su file from recovery
then see if you have root permissions
otherwise flash a custom rom(thet are pre-rooted as i mentioned before)
follow these steps for flashing rom
1)backup your current rom just in case(nandroid backup)
2)format all partitions except sdcard
3)flash the rom
done
by the way what recovery did you install?
Click to expand...
Click to collapse
I flashed the su and after it - I could give root permission for applications.
I installed CynaogenMod 10.1 and I dont like it, because a bit of stuff does not work.
Now Im waiting untill DarkSense will be downloaded.
Im using CWM that came with Rom Menager.
By the way, do you know whats the best solution to keep all my contacts and apps for every rom? (i know that i should restore my old rom and than use the solution [that i wish u would give me], but its still worth it)
And what kernel would u pick to save as much battery as possible?
CHEERS

NexxeR121 said:
I flashed the su and after it - I could give root permission for applications.
I installed CynaogenMod 10.1 and I dont like it, because a bit of stuff does not work.
Now Im waiting untill DarkSense will be downloaded.
Im using CWM that came with Rom Menager.
By the way, do you know whats the best solution to keep all my contacts and apps for every rom? (i know that i should restore my old rom and than use the solution [that i wish u would give me], but its still worth it)
And what kernel would u pick to save as much battery as possible?
CHEERS
Click to expand...
Click to collapse
for your contacts you can use mobile backup 2.it is free in google play store
most users are using titanium backup for apps when they are switching roms.me personally i have never used it
about kernel it depends from your personal usage and what settings will you do(overclock,UV etc)
so long i am using sebastianFM's kernel.i am happy with it

Related

[Q] MyTouch 4G Slide Root question (hboot 1.45.0013/bootloader unlocked/S-On)

Alright, so I got this phone a week ago. First off, I am loving it. Screw Apple.
Anyway, first thing I wanted to do was root it so I can debloat all of T-Mobile's poop applications they cram inside of it.
I've read places that HBOOT 1.45.0013 isn't rootable. I've read it IS rootable, but only with S-OFF on a previous HBOOT. And I've read that it is rootable, but you can't get S-OFF after root.
I've used HTC's unlock tool, which went successful because I flashed CWM through fastboot. I've tried HTC Supertool, MrRoot, and Revolutionary (which says it isn't compatible)
My question then is, which of the above statements is true? If it is rootable, I don't care about S-OFF too much. But I can't ever find a guide that tells me how to root it with this current HBOOT.
Halp pl0x? <3
If you download the Superuser zip (just google superuser android or something), you can flash it in recovery to get root. Alternatively, download a ROM with root preloaded (DS-mod is essentially stock with root and a few other standard root things added in) and flash it.
Limewirelord said:
If you download the Superuser zip (just google superuser android or something), you can flash it in recovery to get root. Alternatively, download a ROM with root preloaded (DS-mod is essentially stock with root and a few other standard root things added in) and flash it.
Click to expand...
Click to collapse
What's the difference in flashing Superuser, and downloading it from the Market?
Sent from my myTouch_4G_Slide using xda premium
It won't install correctly if you do it while the system is on and live (through the market) you have to do it while the operating system is not running (through clockworkmod)
Afterwards, it's fine to update through the market, but the initial install will fail if done on a running version of Android.
Blue6IX said:
It won't install correctly if you do it while the system is on and live (through the market) you have to do it while the operating system is not running (through clockworkmod)
Afterwards, it's fine to update through the market, but the initial install will fail if done on a running version of Android.
Click to expand...
Click to collapse
..Huh, just flashed Superuser. Weird that it's that easy. All the other threads were like "omg HBOOT 1.45.0013 can't be rooted hnnnnnggg"
So, now onto ROMs, are there any ICS based ones you reccomend?
Btw I see tht your question has been answered but in Mr Root's next update will include a Rooter/Unrooter for the newest H-Boot (Without S-Off)
MewTech said:
..Huh, just flashed Superuser. Weird that it's that easy. All the other threads were like "omg HBOOT 1.45.0013 can't be rooted hnnnnnggg"
So, now onto ROMs, are there any ICS based ones you reccomend?
Click to expand...
Click to collapse
For a while it was so - you couldn't do anything with 1.45.0013, HTC broke the OTA so you couldn't unlock it.
In my quest for s-on to s-off (still ongoing) I found a leaked copy of the OTA as a signed HTC package so now we can actually unlock them, and people can work with them and they are now rootable.
Still stuck with s-on though, which is unfortunate - we're working on it and hopefully can crack it soon. Got some leads we're chasing down, each layer we unravel shows us another that has to be solved below it.
ICS? Dunno - i'm not interested in ICS yet, still trying to learn gingerbread through and through (i'm an android newbie) before moving up to ICS. That's on hold right now because of the s-on issue i'm working on. tbalden has been leading the charge on ICS and I would recommend looking into his works if that is your interest.
Limewirelord said:
If you download the Superuser zip (just google superuser android or something), you can flash it in recovery to get root. Alternatively, download a ROM with root preloaded (DS-mod is essentially stock with root and a few other standard root things added in) and flash it.
Click to expand...
Click to collapse
can you explain in detail how to flash it to rom?????
Using CWM to flash it, you will need the super user ZIP file. Find it somewhere (it's everywhere, no doubt) and put it on your SD card. Reboot the phone to recovery mode, and using CWM recovery, select "flash any zip from SD card" (I'd look up the exact wording, except that my phone has been running a solid 24 days without reboot and I really wanna see how long it goes). Navigate to where your super user ZIP file is, and select it. Follow prompts, et voila, root on reboot.
Assuming all works. If something didn't work, you messed up. Try again from step 1, make sure you have a zip file and not an APK file, make sure you select the correct "flash zip" option (there are two, one specifically for update.zip and another for whatever zip you choose).
HIH
ok this is my huge problem i have the same hboot with s-on
i have the full stock stupid t-mobile mt4gs AOS 2.3.4 software# 1.55.531.3 and i DONT have CWM or any of the extras in only thing i succeeded is getting the bootloader unlocked so what should i do?
Install clockworkmod then flash either superuser pr a ROM - if staying stocl with root, be a good time to do some spring cleaning on all the junk it comes with pre-installed.
Blue6IX said:
Install clockworkmod then flash either superuser pr a ROM - if staying stocl with root, be a good time to do some spring cleaning on all the junk it comes with pre-installed.
Click to expand...
Click to collapse
ok i download this now i try flash CWM recovery and i get this
an error occurred while attempting to run privileged commands!
??????
what do i do next??
We love to title our posts here
crimedave1987 said:
ok i download this now i try flash CWM recovery and i get this
an error occurred while attempting to run privileged commands!
??????
what do i do next??
Click to expand...
Click to collapse
Well,
What exactly did you do that returned this error (mainly because I don't remember if fastboot or adb returns that)? What tutorial/guide were you following? Were you in adb trying to "dd" the CWM recovery image or were you trying to flash an img file from within fastboot? Either way, what was the exact command you typed?
Your other thread (sorry, didn't realize I had replied to you in two different places) received an answer as well. After looking around to get the info you need for this post, I see now you've posted in quite a few threads to which I'm subscribed (guess I just never noticed the name, sorry).
So I see you have an unlocked bootloader. At this point, yes, flash CWM. Blue6ix gave an excellent post on how to do this. Is this the one you are currently trying to follow in order to install CWM?
tried to use superuser
I tried to load the superuser zip file in recovery with cwm. installation aborted. any suggestions? I have mytouch4gslide with s on unlocked with HBoot 1.45.0013
wesomatic said:
I tried to load the superuser zip file in recovery with cwm. installation aborted. any suggestion? I have mytouch4g with s on unlocked with HBoot 1.45.0013
Click to expand...
Click to collapse
From my earlier post:
cj chitwood said:
Using CWM to flash it, you will need the super user ZIP file. Find it somewhere (it's everywhere, no doubt) and put it on your SD card. Reboot the phone to recovery mode, and using CWM recovery, select "flash any zip from SD Card”. Navigate to where your super user ZIP file is, and select it. Follow prompts, et voila, root on reboot.
Assuming all works. If something didn't work, you messed up. Try again from step 1, make sure you have a zip file and not an APK file, make sure you select the correct "flash zip" option (there are two, one specifically for update.zip and another for whatever zip you choose).
HIH
Click to expand...
Click to collapse
Did this help? Only things I can think of are (1) using ”flash update.zip” instead of ”flash [any] zip file” or, less likely, (2) trying to flash an apk instead of a zip.
--
Sent from my Android ”phone”:
HTC DoubleShot /T-Mobile MyTouch 4G Slide running Bulletproof
Yes, that thread did help me. I used your instructions. I even have a new sd card. I have read some threads about formating it first. I did not do that. Also where can I get a good zip file? I down loaded it from some file sharing program 2share I think... Tried again ROOTED!!!! It was so easy!!! Been doing this for a week!!! Wow!!!!!!!!!!!!!!!!!!!
bricked my phone!!!
Just want to add... Do not use ROM Manager from The Market. Bricked my phone. Just stays in start up. Had it rooted and everything!!!!
NO BRICK
Thank God For CWM!!!!!
I am stuck someplace in betweem
Hi:
I too have a MyTouch Slidwe 4G with the hboot 1.45.0013. All the contrary information I have found lead me to go to the professionals. I purchased the root-android.org software. It seemed to run fine - I got no errors and it said that the phone was rooted. I see the superuser app on the phone. However, when I try to run Titanium Backup, it says that the phone is not rooted. The people at root-android.org are not answering my emails (I did get my money back). Any ideas of where I should go from here?
Thanks!
You should never have to purchase root for any android, if it has been done once then chances are it is plastered how to all over the internet, if the phone has a thread on xda then it will be there. Being you got yourself this far I'll help you out a bit more
http://forum.xda-developers.com/showthread.php?p=29439712
Read and understand is my advice, always read until you understand, then search if you have questions, then finally ask questions here if you are still stumped.
For the most part every question you can ask is already answered by one of the super helpful xda folk here, and chances are it is the right information.
I do advice to gain radio soff with the wire trick, it will make life easier... Read up and happy flashing!
Sent from my Nexus 7 using xda premium

[Q] Help, boot loop here?

I wanted to flash to ARHD 6.3
This is my first time.. I managed to S off.. But then the bootloop began after I flashed PG58IMG.zip via fastboot.
Step 1. To S-OFF your Sensation - (You do not need to do this if you have S-off already or done this before) - WORKING NOW for TMOUS users
Visit
download the application for your operating System. AND EXTRACT IT TO A FOLDER
YOU MAY NEED TO DISABLE YOUR ANTIVIRUS PROGRAM- Norton is flagging up Revolutionary as a Virus when it isn't
IMPORTANT
Fill out the form under the download links with your OS, Device, Hboot Version and Serial number. This will give your beta key to enable you to S - OFF. Make a note of this.
How To get your Hboot Version - 3 methods below
1. [/url] and if it has found your device it should read
"Found your Device: HTC Sensation Z710* Applications -> Development)
4. With the phone switched on (not in HBOOT, just the regular home screen), plug in your USB cable and select HTC sync mode.(IGNORE any warning messages on your phone telling you it cannot find HTC Sync )
5. Launch revolutionary.exe. It should detect the phone and ask for your beta key. Type it (BE CAREFUL, as its case sensitive) or copy and paste it in.
If Revolutionary fails to find your phone verify you have all the drivers installed, try disk drive mode or charging mode (Linux users can use disk drive mode. Confirmed to be working by others)
6. Once you have entered your beta key correctly, follow any on screen prompts or actions from revolutionary and wait for it to S-Off,
7. You're done. Your Device will Successfully have S-OFF....if it hangs on method 3 and doesn't S-Off. See post 2 below for solutions.
IF REVOLUTIONARY SAYS FAILED YOUR PHONE IS NOT SUPPORTED. Go back and check hboot using the methods above. some users are told its failed and they still have S off now. If you have S-off your hboot will now be 1.17.1011 and revolutionary will tell you now your device is not supported
8. Revolutionary will now ask you to Install clockwork recovery mod after S OFF. Type N and install it manually below (the recovery provided is v4.0.1.4 doesn't charge when device is switched off, the one below v5.0.0.1 does charge)
9. Your Device now is S-off.
To install clockwork recovery for the sensation. Follow step 2!
STEP 2. To INSTALL Recovery - v5.0.0.8
1. Download recovery v5.0.0.8 for the Sensation HERE: or Multiupload
2. Copy the PG58IMG file into the Root folder of your SD card (The main Folder of your Memory Card)
3. Turn off your phone FUlly and reboot into the Bootloader/HBOOT screen (see post above on how to get to hboot screen)
4. Press Volume up to Accept when it asks" Do you want to start the update"
5. Press Power Off to Reboot back to android after installation is successful (normal screen with homescreen)
Click to expand...
Click to collapse
I got stuck at step 2.5.. Pls help me out. Actually I used to flash ROM for i9000 a couple of times but for sensation this is my first time. I'm using sensation unlocked. I lived in Malaysia so most probably its asians version.
ethanmars said:
I wanted to flash to ARHD 6.3
This is my first time.. I managed to S off.. But then the bootloop began after I flashed PG58IMG.zip via fastboot.
I got stuck at step 2.5.. Pls help me out. Actually I used to flash ROM for i9000 a couple of times but for sensation this is my first time. I'm using sensation unlocked. I lived in Malaysia so most probably its asians version.
Click to expand...
Click to collapse
Hi,
Try loading 5.0.2.0 HERE
Then follow THIS GUIDE to install 6.3.0
thank you so much for your reply!
i've downloaded that. Now how do i install it? fastboot only accept .zip files right? or is the instruction is in the 2nd link you gave me?
ethanmars said:
thank you so much for your reply!
i've downloaded that. Now how do i install it? fastboot only accept .zip files right? or is the instruction is in the 2nd link you gave me?
Click to expand...
Click to collapse
Hi,
Just rename 5.0.2.0 to PG58IMG.zip
Power off
Power on holding volume- and power button.
When it has finished,delete PG58IMG.zip
malybru said:
Hi,
Just rename 5.0.2.0 to PG58IMG.zip
Power off
Power on holding volume- and power button.
When it has finished,delete PG58IMG.zip
Click to expand...
Click to collapse
just pressed thanks, hehe..
i was wandering alone while waiting for your reply n managed to install ext4 touch recovery.. lol.. but still bootloop when pressed reboot.
now I wanna know will the 5.0.2.0 help me to access android again coz i haven't backup my contacts n sms yet..
let's say the answer is no, will it help if i make a nandroid backup now? or is it too late considering i cant access android anymore?
ethanmars said:
just pressed thanks, hehe..
i was wandering alone while waiting for your reply n managed to install ext4 touch recovery.. lol.. but still bootloop when pressed reboot.
now I wanna know will the 5.0.2.0 help me to access android again coz i haven't backup my contacts n sms yet..
let's say the answer is no, will it help if i make a nandroid backup now? or is it too late considering i cant access android anymore?
Click to expand...
Click to collapse
Hi,
Lesson for the future...
Always backup(nandroid,Titanium Backup,google) BEFORE starting anything major.
If you have 4EXT installed,then follow THIS GUIDE to install 6.3.0
malybru said:
Hi,
Lesson for the future...
Always backup(nandroid,Titanium Backup,google) BEFORE starting anything major.
If you have 4EXT installed,then follow THIS GUIDE to install 6.3.0
Click to expand...
Click to collapse
thanks again ..
so that means there's no way to access my phone like it was before eh?
btw, i thought it wasnt anything major coz it was just gaining an s off n then installing recovery.. then this happened.. i dont know what went wrong.. hmm
so i shall proceed with installing 6.3.0 since its like the only option i have left i believe?
ethanmars said:
thanks again ..
so that means there's no way to access my phone like it was before eh?
btw, i thought it wasnt anything major coz it was just gaining an s off n then installing recovery.. then this happened.. i dont know what went wrong.. hmm
so i shall proceed with installing 6.3.0 since its like the only option i have left i believe?
Click to expand...
Click to collapse
Hi,
Just as a matter of interest.
Do you still have a PG58IMG.zip on your sd card?
If so ,delete it.
Then it may boot into your ROM...
malybru said:
Hi,
Just as a matter of interest.
Do you still have a PG58IMG.zip on your sd card?
If so ,delete it.
Then it may boot into your ROM...
Click to expand...
Click to collapse
oh i've read that as well so i have deleted it manually by using sd adapter.. then reinserted it back n tried to boot normally.. but to no avail.. what's the root cause of this eh?
when i gained s off, i still can boot into my ROM.. however disaster happens when i flashed the .zip files obtained as per instructions..
oh but directly after i've flashed it, i didn't remove the .zip files n tried to immediately reboot into ROM.. does this make a difference?
ethanmars said:
oh i've read that as well so i have deleted it manually by using sd adapter.. then reinserted it back n tried to boot normally.. but to no avail.. what's the root cause of this eh?
when i gained s off, i still can boot into my ROM.. however disaster happens when i flashed the .zip files obtained as per instructions..
Click to expand...
Click to collapse
Hi,
Did you complete the s-off thread by rooting and getting SuperCID?
malybru said:
Hi,
Did you complete the s-off thread by rooting and getting SuperCID?
Click to expand...
Click to collapse
good question..
immediately after s off, i boot into my ROM and tried to install busybox and other apps that requires superuser or root but failed and stating that my device was still not rooted..
so i proceed to install a recovery (in this case its ext4 recovery) but failed to find a .zip installer (but managed to find the .apk and .img version but afraid to proceed considering the extension wasn't the same as per guide's PG5...ZIP). so i tried to simply install cwm as per stated in the guide. coz i know after recovery is installed, only then i would be able to install the su zip files.
then it boot looped.. n here we are trying to shoot all of these troubles.. XD
and if my understanding was wrong, pls correct me. thanks!
only after you sent me the links i managed to install ext4 recovery via a much easier method using cmd.exe..
n that also means that i wasn't even able to follow through the supercid part of the guide..
ethanmars said:
good question..
immediately after s off, i boot into my ROM and tried to install busybox and other apps that requires superuser or root but failed and stating that my device was still not rooted..
so i proceed to install a recovery (in this case its ext4 recovery) but failed to find a .zip installer (but managed to find the .apk and .img version but afraid to proceed considering the extension wasn't the same as per guide's PG5...ZIP). so i tried to simply install cwm as per stated in the guide. coz i know after recovery is installed, only then i would be able to install the su zip files.
then it boot looped.. n here we are trying to shoot all of these troubles.. XD
and if my understanding was wrong, pls correct me. thanks!
only after you sent me the links i managed to install ext4 recovery via a much easier method using cmd.exe..
Click to expand...
Click to collapse
Hi,
I follow THIS GUIDE
If you have 4EXT installed ,then you should be able to boot into recovery and make a nandroid,then root,then supercid...
malybru said:
Hi,
I follow THIS GUIDE
If you have 4EXT installed ,then you should be able to boot into recovery and make a nandroid,then root,then supercid...
Click to expand...
Click to collapse
wait a moment, i dont know if things are making more sense to me but, is it possible that this was caused by a wrong firmware? i just figured out my cid and its htc_044 and there are 4 different version of firmware for this cid, so should i try each of it until my phone boots to my original ROM?
Update: Oh God, I'm in such a relief! Thank God it works now. I flashed the firmware 1.17 n now am able to boot back into my ROM. Now i'm gonna get things backed up n will proceed. phew thanks so much for helping me out. The cause was maybe the zip files werent compatible with mine. So i check my cid n mid, n downloaded what might be the original one. so now its fixed..

[Q] OTA Update for an XE

Hey,
Last night I got a system update message and on reboot it loaded clockworkmod and now I can't install the update
I rooted and installed the mod before but I never use it...
How can I disable clockworkmod or deleting it so I can get the official update (I would much prefer that)
Thanks,
PS. I have read other posts about this online but the problem have been slightly different and with other phones so the wrong files, i'm guessing
ryall999 said:
Hey,
Last night I got a system update message and on reboot it loaded clockworkmod and now I can't install the update
I rooted and installed the mod before but I never use it...
How can I disable clockworkmod or deleting it so I can get the official update (I would much prefer that)
Thanks,
PS. I have read other posts about this online but the problem have been slightly different and with other phones so the wrong files, i'm guessing
Click to expand...
Click to collapse
I'm guessing the OTA you got was to software version 3.33.401.153?
If yes just download and run the RUU exe from here. This will put you on that software version.
Jonny said:
I'm guessing the OTA you got was to software version 3.33.401.153?
Click to expand...
Click to collapse
How do i find out what software it is updating to?
When i search for an update it is just says enhancement of 60.53Mb and not the software version....
ryall999 said:
How do i find out what software it is updating to?
When i search for an update it is just says enhancement of 60.53Mb and not the software version....
Click to expand...
Click to collapse
what software version are you on now? Go into settings > about to find this
Jonny said:
what software version are you on now? Go into settings > about to find this
Click to expand...
Click to collapse
I'm currently on 3.32.401.105, is the one you mentioned earlier the next version?
ryall999 said:
I'm currently on 3.32.401.105, is the one you mentioned earlier the next version?
Click to expand...
Click to collapse
no, 3.33.401.106 is the next one then it is 3.33.401.153
However, you can just flash the RUU and it will put you on 3.33.401.153 without having to flash 3.33.401.106 - also because you are rooted the OTA file may fail to run whereas the RUU wont.
Jonny said:
no, 3.33.401.106 is the next one then it is 3.33.401.153
However, you can just flash the RUU and it will put you on 3.33.401.153 without having to flash 3.33.401.106 - also because you are rooted the OTA file may fail to run whereas the RUU wont.
Click to expand...
Click to collapse
So i download it and stick in on my sd card and then 'install update from zip', right?
ryall999 said:
So i download it and stick in on my sd card and then 'install update from zip', right?
Click to expand...
Click to collapse
No, its a .exe file - official HTC RUU (Rom Update Utility) so you download it then run it from a windows pc
Jonny said:
No, its a .exe file - official HTC RUU (Rom Update Utility) so you download it then run it from a windows pc
Click to expand...
Click to collapse
Love how I click the link and get this 'ICXperia user website temporarily down' haha
So is it pretty straight forward once downloaded..... is there instruction somewhere?
PS will it wipe my phone? do i need to back up? and what would be the best way of doing that?
ryall999 said:
Love how I click the link and get this 'ICXperia user website temporarily down' haha
So is it pretty straight forward once downloaded..... is there instruction somewhere?
PS will it wipe my phone? do i need to back up? and what would be the best way of doing that?
Click to expand...
Click to collapse
Regardless of whether my hoster's website is down, my FTP remains up so you can still download the file using the link I posted. Its self explanatory and comes with instructions within the installer, it will wipe your phone so I would suggest doing a nandroid backup of data only then restoring data from a custom recovery (you will have to reflash the custom recovery after the RUU has finished because it will return you to stock recovery)
Jonny said:
Regardless of whether my hoster's website is down, my FTP remains up so you can still download the file using the link I posted. Its self explanatory and comes with instructions within the installer, it will wipe your phone so I would suggest doing a nandroid backup of data only then restoring data from a custom recovery (you will have to reflash the custom recovery after the RUU has finished because it will return you to stock recovery)
Click to expand...
Click to collapse
Oh i didn't realised it was your website
I'm not gonna reflash afterwards...
so will nandroid backup still work after i use the RUU if i dont flash with a custom recovery later?
PS. Will this get rid of clockworkmod or just bypass it?
ryall999 said:
Oh i didn't realised it was your website
I'm not gonna reflash afterwards...
so will nandroid backup still work after i use the RUU if i dont flash with a custom recovery later?
PS. Will this get rid of clockworkmod or just bypass it?
Click to expand...
Click to collapse
Not my website, homeworlder's (he is the hoster who gives me webspace via FTP)
My website is currently private only due to testing some stuff for custom ROMs
Jonny said:
Not my website, homeworlder's (he is the hoster who gives me webspace via FTP)
My website is currently private only due to testing some stuff for custom ROMs
Click to expand...
Click to collapse
I'm not gonna reflash afterwards...
so will nandroid backup still work after i use the RUU if i dont flash with a custom recovery later?
PS. Will this get rid of clockworkmod or just bypass it?
ryall999 said:
I'm not gonna reflash afterwards...
so will nandroid backup still work after i use the RUU if i dont flash with a custom recovery later?
PS. Will this get rid of clockworkmod or just bypass it?
Click to expand...
Click to collapse
The RUU replaces (gets rid of) clockwork mod with HTC Stock recovery, so to restore nandroid backup after RUU you will need to reflash CWM
Jonny said:
The RUU replaces (gets rid of) clockwork mod with HTC Stock recovery, so to restore nandroid backup after RUU you will need to reflash CWM
Click to expand...
Click to collapse
So i will just back everything up onto my sd card using an app off the play store
I'm sure you are getting annoyed with me by now So just say if this is the way to do it
-Backup important stuff on sd card with app
-Follow instruction on .exe
-Then i have a stock phone and it is updated
-Restore my data....
ryall999 said:
So i will just back everything up onto my sd card using an app off the play store
I'm sure you are getting annoyed with me by now So just say if this is the way to do it
-Backup important stuff on sd card with app
-Follow instruction on .exe
-Then i have a stock phone and it is updated
-Restore my data....
Click to expand...
Click to collapse
I think with an app like that you need root to use it (Titanium backup needs root) and to root you still need a custom recovery so I would just recommend the method I suggested but apart from that the method is correct
Jonny said:
I think with an app like that you need root to use it (Titanium backup needs root) and to root you still need a custom recovery so I would just recommend the method I suggested but apart from that the method is correct
Click to expand...
Click to collapse
I meant i'll backup important stuff with a normal backup app off play store.. like texts, contacts, photos etc
I want to reset my phone anyway... speed it up, maybe
ryall999 said:
I meant i'll backup important stuff with a normal backup app off play store.. like texts, contacts, photos etc
I want to reset my phone anyway... speed it up, maybe
Click to expand...
Click to collapse
then yeah thats fine
Jonny said:
then yeah thats fine
Click to expand...
Click to collapse
Thanks a lot, you've been great
I'll shove some 'thanks' throughout the thread on posts
Jonny said:
then yeah thats fine
Click to expand...
Click to collapse
Finally got round to doing this and i got an error 115
'ERROR [155~159]: IMAGE ERROR'... One of these error messages will appear when you use the incorrect RUU to update and the image file size is larger than the Flash ROM size. In this case, download the correct RUU version and try again.
Should i update to the 3.33.401.106 RUU first. If so, where do I find it?
Sorry about this

AT&T HTC One X Bricked (Blocked)

Good day Friends of the Forum
I have a problem and do not know how to fix it , I have navigate a lot in the network and I could not get my phone to work . I have HTC One X from AT&T. By playing around with the phone, accidentaly I delete the O.S. so right now my phone is locked . I can't load Origanal or Custom ROMS . The only thing I can do is enter the bootloader and install recovery ( TWRP ) I installed several versions of TWRP to install a custom rom or I locked the bootloader to install the original RUU and everything has been WITHOUT SUCCESS .
Right now I have S -ON , my HBOOT is 2.14 and I can install TWRP Recovery 2.6.0.0 or 2.6.3.0 .
I have read in many places that I have to make an S -OFF to install a Custom ROM , but all I get Tips that I need an OS runing to finish the installation (or modified to do the S -OFF) . What can I do if my S.O. is actuall blocked (brick). Only screen I got when I turned on or reboot my is the white screen " HTC quietly brillant" .
My friends , I request help from the wise in this range. Since I ran out of ideas . I attached pictures with my phone information
regards
You are not bricked (or "blocked", whatever that means). A brick means the device cannot be recovered without opening the device (replacing mainboard, JTAG, etc.). If the screen comes on, its not bricked.
Just use your unlock token to unlock the bootloader again. TWRP and custom ROMs won't install if the bootloader is relocked. The unlock token will sometimes take several (or even many) tries to work. So if you tried already, and it didn't work, just keep trying.
Also, if you are SuperCID (which was required to get bootloader unlock on the AT&T version) and S-on (which you are) DO NOT RUN the 3.18 RUU. If you do so, you will brick the device for real (only recoverable by JTAG).
My advice would be re-unlock the bootloader, install TWRP, install the custom ROM of your choice, and then achieve S-off.
Also, I find this situation comes up far too often ("I wiped the OS and I don't know what to do"). Don't wipe things (like the OS) if you don't know what the result is going to be. And if you had made a nandroid before messing with things, you could have just restored. Seems there are just far too many n00bs getting into this hobby without exercising any basic common sense.
Thank you so much for your advice.
I just re-Unlock my phone.
Would you please help me with one issue? When I try to install a custom rom via TWRP 2.6.0.0 it says checking for MD5 file. No MD5 file found.
and the phone start restarting and restarting...
How MD5 file works or whats the the function of this file?
Best regards
eL_pIt said:
Would you please help me with one issue? When I try to install a custom rom via TWRP 2.6.0.0 it says checking for MD5 file. No MD5 file found.
and the phone start restarting and restarting...
How MD5 file works or whats the the function of this file?
Click to expand...
Click to collapse
MD5 is a checksum file (verifies the integrity of the download). But this shouldn't be happening in TWRP. Try the default wipe option in TWRP (factory reset, cache and Dalvik) and try again.
Uncheck the verify md5 box
Sent from my VENOMized HoxL
area51avenger said:
Uncheck the verify md5 box
Click to expand...
Click to collapse
That's what I was thinking. But I'm on TWRP 2.6.0, and don't see that option.
Sent from my GT-N5110 using xda app-developers app
area51avenger said:
Uncheck the verify md5 box
Sent from my VENOMized HoxL
Click to expand...
Click to collapse
Doesn´t Work
redpoint73 said:
That's what I was thinking. But I'm on TWRP 2.6.0, and don't see that option.
Sent from my GT-N5110 using xda app-developers app
Click to expand...
Click to collapse
I have a problem when I try to install custom rom ViperXL_4.2.0.zip
When I try to install, the rom send me to a wizard, I follow the steps of the wizard and the star installing the rom, when the installation percent reach 7 % the phone restarts and send me the HTC quitly brillant screen.
Do you think that I need re-lock the bootloader and then re-unlock the bootloader??
thanks
No, do not relock the bootloader, that isn't the problem. I'm not trying to sound harsh, but why are you attempting to install custom ROMs? You lack a basic understanding of what you're doing, this is very dangerous. I seriously suggest that once you get the phone up and running again you stop modifying it and take the time to do some research and learn about what you're doing. You should always know what you're doing before you do it. Not knowing what you're doing leads to situations like this where you have idea how to recover, or even to a bricked device.
Did you manually check the md5 of the ROM zip after downloading it? The file might be corrupt, thus causing the installer to fail.
Sent from my Evita
eL_pIt said:
Do you think that I need re-lock the bootloader and then re-unlock the bootloader??
Click to expand...
Click to collapse
No, I don't think relocking is going to help at all.
Try downloading the ROM again.
Sent from my GT-N5110 using xda app-developers app
timmaaa said:
No, do not relock the bootloader, that isn't the problem. I'm not trying to sound harsh, but why are you attempting to install custom ROMs? You lack a basic understanding of what you're doing, this is very dangerous. I seriously suggest that once you get the phone up and running again you stop modifying it and take the time to do some research and learn about what you're doing. You should always know what you're doing before you do it. Not knowing what you're doing leads to situations like this where you have idea how to recover, or even to a bricked device.
Did you manually check the md5 of the ROM zip after downloading it? The file might be corrupt, thus causing the installer to fail.
Sent from my Evita
Click to expand...
Click to collapse
Thanks verry much for your advice, now I am living the consequences for start playing with my device without knowledge. I promise when this nightmare ends, I am going to do a deep research for installing custom roms and how to make backups before playing.
This problem happens with all roms that I try to install?? In your experience how do I make a good MD5 manually check .
Regards
The md5 sum will be listed on the download page of the ROM, you need to use an md5 checking program/app to make sure the md5 of the downloaded file matches the one listed on the download page. To make this easier to understand, an md5 is like a fingerprint of the file made up of a series of letters and numerals. If the md5 of the file matches the one listed on the site you know the file is exactly as it should be. If it doesn't match then you know the file has been corrupted during the download.
Sent from my Evita
eL_pIt said:
I have a problem when I try to install custom rom ViperXL_4.2.0.zip
When I try to install, the rom send me to a wizard, I follow the steps of the wizard and the star installing the rom, when the installation percent reach 7 % the phone restarts and send me the HTC quitly brillant screen.
Click to expand...
Click to collapse
Wipe the phone using TWRP wipe options, Then try to install it again, If it fails again then wipe and install clean ROM http://forum.xda-developers.com/showthread.php?t=1655011 Or try the stock ROM http://forum.xda-developers.com/showthread.php?t=2423735
Then try viperXL again. Make sure its the full 7xxMB Zip and not the update thats like 44MB
(Wiping With TWRP will not erase TWRP)
tjhooker73 said:
Wipe the phone using TWRP wipe options, Then try to install it again, If it fails again then wipe and install clean ROM http://forum.xda-developers.com/showthread.php?t=1655011 Or try the stock ROM http://forum.xda-developers.com/showthread.php?t=2423735
Then try viperXL again. Make sure its the full 7xxMB Zip and not the update thats like 44MB
(Wiping With TWRP will not erase TWRP)
Click to expand...
Click to collapse
But, how can I install a Clean Rom if it asks me S-OFF.....:crying: Stiil with my Phone Off
eL_pIt said:
But, how can I install a Clean Rom if it asks me S-OFF.....:crying: Stiil with my Phone Off
Click to expand...
Click to collapse
You don't need s-off to flash clean rom
Sent from my iPhone using Tapatalk
31ken31 said:
You don't need s-off to flash clean rom
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Hi, I don't know what am I doing wrong, I still can´t install a clean rom. This is what I get when I try to install I get this message "All Done!! Updating Partition Details "
What I've been missing, because I restart my phone after that message and I get White Screen (HTC Quality Brillant) and the phone has a never stop restarting.
I attached images, please see it. First One is loading the clean ROM and Secon One is when finish installing ROM.
Best Regards
Did you check the md5 of the ROM after downloading it? I did ask you this in a previous post but you never answered.
Sent from my Evita
eL_pIt said:
Hi, I don't know what am I doing wrong, I still can´t install a clean rom. This is what I get when I try to install I get this message "All Done!! Updating Partition Details "
What I've been missing, because I restart my phone after that message and I get White Screen (HTC Quality Brillant) and the phone has a never stop restarting.
I attached images, please see it. First One is loading the clean ROM and Secon One is when finish installing ROM.
Best Regards
Click to expand...
Click to collapse
Did you flash boot.img via fastboot after rom install?
Fastboot flash boot boot.img
Sent from my iPhone using Tapatalk
timmaaa said:
Did you check the md5 of the ROM after downloading it? I did ask you this in a previous post but you never answered.
Sent from my Evita
Click to expand...
Click to collapse
I´m Sorry, I din't check the md5, do you think the problem resides in the md5 file?? I already try with 12 custom and 1 clean rom for the AT&T HTC One X, that's why I didn´t check the md5 file, because I thought that one of all the roms, one of them is going to be the correct one. In some cases there is no md5 file for downloading.
Best regards

I'm a super-noob at this

Hi, I'm new to this forum and I hope I'm posting this in the right section of the forum, apologize if not.
I'm just a super-noob at this overall cell-phone terminology for Rooting, ROMs and etc.
I want to root my phone and input the new Android Jelly Bean on it (I hope that's possible)
I have no idea where to start. When I search online I found some older threads on how to but I'm not sure if it's still viable.
I'll post my phone info and see where this will go.
HTC Sensation z710e
Android version 2.3.4
Software # 1.45.401.3
When I press "power" + "vol down" I see
-Revolutionary-
Pyramid PVT ship S-OFF RL
HBOOT 1.17.1111
Any help, hopefully step by step help will be most appreciated. Thank you for your patience and if you require more info let me know
megamonkey said:
Hi, I'm new to this forum and I hope I'm posting this in the right section of the forum, apologize if not.
I'm just a super-noob at this overall cell-phone terminology for Rooting, ROMs and etc.
I want to root my phone and input the new Android Jelly Bean on it (I hope that's possible)
I have no idea where to start. When I search online I found some older threads on how to but I'm not sure if it's still viable.
I'll post my phone info and see where this will go.
HTC Sensation z710e
Android version 2.3.4
Software # 1.45.401.3
When I press "power" + "vol down" I see
-Revolutionary-
Pyramid PVT ship S-OFF RL
HBOOT 1.17.1111
Any help, hopefully step by step help will be most appreciated. Thank you for your patience and if you require more info let me know
Click to expand...
Click to collapse
firstly your device is already on S-OFF which makes things a lot easier
flash 3.33 universal from here
http://forum.xda-developers.com/showthread.php?t=1459767
follow the instuctions to the letter
and before flashing check md5 sums(important)
after that flash the new rom from recovery
done:good:
rzr86 said:
firstly your device is already on S-OFF which makes things a lot easier
flash 3.33 universal from here
http://forum.xda-developers.com/showthread.php?t=1459767
follow the instuctions to the letter
and before flashing check md5 sums(important)
after that flash the new rom from recovery
done:good:
Click to expand...
Click to collapse
Great to know my phone's already S-OFF'd
Does that mean I'm rooted or not yet?
How do I check md5 sums?
I'm really bad at this stuff and I just want as much help as possible so i don't screw up
Thanks for your help and patience
megamonkey said:
Great to know my phone's already S-OFF'd
Does that mean I'm rooted or not yet?
How do I check md5 sums?
I'm really bad at this stuff and I just want as much help as possible so i don't screw up
Thanks for your help and patience
Click to expand...
Click to collapse
probably you aren't rooted
but consider this
every custom rom comes prerooted
so there is no point to root your current one
about md5 sums:
put the zip in your sdcard
navigate with any file manager you have to that zip
tap and hold on it until it pops up a menu
go to properties
somewhere it will say show checksum or calculate checksum
it will show you a row of letters and numbers
then compare it with the one from the download link and see if it matches
note: once you flash the 3.33 universal(ics firmware) your current rom won't boot because it is a gb one
so you have to flash the new rom after upgrading your firmware
and don't forget to backup your current rom just in case
by the way do you have sdk tools installed in your pc?(adb and fastboot files)
megamonkey said:
Great to know my phone's already S-OFF'd
Does that mean I'm rooted or not yet?
How do I check md5 sums?
I'm really bad at this stuff and I just want as much help as possible so i don't screw up
Thanks for your help and patience
Click to expand...
Click to collapse
Google md5 generator for Windows. Use the first link that you find.
If you have 4ext recovery, you can check md5 there itself.
Happy to help.
Okay, I checked with an MD5 program suggested, and it codes match. Great!
How do I backup my current ROM? I've heard of Clockwork and 4Ext but doesn't it require a Root?
I plan to use to ROM. How do I flash a new ROM?
http://forum.xda-developers.com/showthread.php?t=2115520
megamonkey said:
Okay, I checked with an MD5 program suggested, and it codes match. Great!
How do I backup my current ROM? I've heard of Clockwork and 4Ext but doesn't it require a Root?
I plan to use to ROM. How do I flash a new ROM?
http://forum.xda-developers.com/showthread.php?t=2115520
Click to expand...
Click to collapse
first you have to flash 3.33 universal
also tell me do you have sdk tools installed in your pc?
rzr86 said:
first you have to flash 3.33 universal
also tell me do you have sdk tools installed in your pc?
Click to expand...
Click to collapse
Okay I'll flash the 3.33 universal
No I don't have SDK tools installed, I have no idea what that is.
Also how do I backup my current ROM?
megamonkey said:
Okay I'll flash the 3.33 universal
No I don't have SDK tools installed, I have no idea what that is.
Click to expand...
Click to collapse
wait then!
edit: from here http://forum.xda-developers.com/showthread.php?t=1661631
use only the one click root tool to root your current rom
then use the 4ext updater app to download and install 4ext recovery
link in my signature
then follow with the 3.33
---------- Post added at 10:51 PM ---------- Previous post was at 10:47 PM ----------
megamonkey said:
Also how do I backup my current ROM?
Click to expand...
Click to collapse
from recovery see my last post
since you don't have sdk tools installed start with the one click root tool
Okay so I downloaded the one click tool. I followed the steps, but when I double-click the "root" bat file. the command program pops up but it says repeatedly " 'adb' is not recognized as an internal or external command, operable program or batch file"
any idea?
megamonkey said:
Okay so I downloaded the one click tool. I followed the steps, but when I double-click the "root" bat file. the command program pops up but it says repeatedly " 'adb' is not recognized as an internal or external command, operable program or batch file"
any idea?
Click to expand...
Click to collapse
i gave an answer in the other thread
check it and lets continue here
Doesn't look like the drivers links work anymore. they got removed. Do i just download htc sync from the main htc website? does that work?
edit: do the older ones work?
edit: I downloaded HTC sync manager...still doesn't work. Can't even get my phone to sync. I'm starting to lose hope doing this
megamonkey said:
Doesn't look like the drivers links work anymore. they got removed. Do i just download htc sync from the main htc website? does that work?
edit: do the older ones work?
edit: I downloaded HTC sync manager...still doesn't work. Can't even get my phone to sync. I'm starting to lose hope doing this
Click to expand...
Click to collapse
try this one
http://www.mediafire.com/download/8dl8s3l9mr6ggr9/HTCDriver_4.1.0.001.exe
if it fails then you have to install sdk tools
http://forum.xda-developers.com/showthread.php?t=1152148
Hey rzr86, I've been away for more than a week so I wasn't able to work on the phone.
Funny thing I found out about my phone, it seems it was already rooted. Good thing because less of a hassle for me now.
So I need to download a ROM backup program, which one do you recommend? I don't seem to have one installed
megamonkey said:
Hey rzr86, I've been away for more than a week so I wasn't able to work on the phone.
Funny thing I found out about my phone, it seems it was already rooted. Good thing because less of a hassle for me now.
So I need to download a ROM backup program, which one do you recommend? I don't seem to have one installed
Click to expand...
Click to collapse
since you are rooted install 4ext updater app
from that app download and install 4ext recovery touch
link in my signature
then boot to the recovery
go to backup/restore->backup
then you can backup your current rom
after that format all partitions except sdcard from 4ext
flash the new rom
done
rzr86 said:
since you are rooted install 4ext updater app
from that app download and install 4ext recovery touch
link in my signature
then boot to the recovery
go to backup/restore->backup
then you can backup your current rom
after that format all partitions except sdcard from 4ext
flash the new rom
done
Click to expand...
Click to collapse
I still need to flash a 3.33 kernal but need a nandroid ROM backup. Does 4EXT work?
megamonkey said:
I still need to flash a 3.33 kernal but need a nandroid ROM backup. Does 4EXT work?
Click to expand...
Click to collapse
yeap 4ext works and in my previous post i was talking about nandroid backup
use first the app for 4ext and then go for 3.33 firmware
rzr86 said:
yeap 4ext works and in my previous post i was talking about nandroid backup
use first the app for 4ext and then go for 3.33 firmware
Click to expand...
Click to collapse
I got 4EXT recovery on my phone but when I went into to bootloader (power + vol down) OMG I ****ed something up...I forgot I had the firmware 3.33 zip file on my SD card and I updated so now I have firmware 3.33 and I can't boot my phone.
Can't believe I ****ed this up...any idea how to go back?
Edit: Can I use 4EXT to access my sd card and delete the PG58IMG zip from my sd card, then put in the firmware 1.17 zip and flash that?
megamonkey said:
I got 4EXT recovery on my phone but when I went into to bootloader (power + vol down) OMG I ****ed something up...I forgot I had the firmware 3.33 zip file on my SD card and I updated so now I have firmware 3.33 and I can't boot my phone.
Can't believe I ****ed this up...any idea how to go back?
Edit: Can I use 4EXT to access my sd card and delete the PG58IMG zip from my sd card, then put in the firmware 1.17 zip and flash that?
Click to expand...
Click to collapse
Eject sd card let the phone boot up than insert the sd and delete the zip, or use sd card adapter to pc and delete the zip
Sent from my HTCSensation using xda app-developers app
Mile_zdr said:
Eject sd card let the phone boot up than insert the sd and delete the zip, or use sd card adapter to pc and delete the zip
Sent from my HTCSensation using xda app-developers app
Click to expand...
Click to collapse
I can't boot up my phone because I accidentally flashed 3.33 when I'm still using gingerbread.

Categories

Resources