[Q] OTA Update for an XE - HTC Sensation

Hey,
Last night I got a system update message and on reboot it loaded clockworkmod and now I can't install the update
I rooted and installed the mod before but I never use it...
How can I disable clockworkmod or deleting it so I can get the official update (I would much prefer that)
Thanks,
PS. I have read other posts about this online but the problem have been slightly different and with other phones so the wrong files, i'm guessing

ryall999 said:
Hey,
Last night I got a system update message and on reboot it loaded clockworkmod and now I can't install the update
I rooted and installed the mod before but I never use it...
How can I disable clockworkmod or deleting it so I can get the official update (I would much prefer that)
Thanks,
PS. I have read other posts about this online but the problem have been slightly different and with other phones so the wrong files, i'm guessing
Click to expand...
Click to collapse
I'm guessing the OTA you got was to software version 3.33.401.153?
If yes just download and run the RUU exe from here. This will put you on that software version.

Jonny said:
I'm guessing the OTA you got was to software version 3.33.401.153?
Click to expand...
Click to collapse
How do i find out what software it is updating to?
When i search for an update it is just says enhancement of 60.53Mb and not the software version....

ryall999 said:
How do i find out what software it is updating to?
When i search for an update it is just says enhancement of 60.53Mb and not the software version....
Click to expand...
Click to collapse
what software version are you on now? Go into settings > about to find this

Jonny said:
what software version are you on now? Go into settings > about to find this
Click to expand...
Click to collapse
I'm currently on 3.32.401.105, is the one you mentioned earlier the next version?

ryall999 said:
I'm currently on 3.32.401.105, is the one you mentioned earlier the next version?
Click to expand...
Click to collapse
no, 3.33.401.106 is the next one then it is 3.33.401.153
However, you can just flash the RUU and it will put you on 3.33.401.153 without having to flash 3.33.401.106 - also because you are rooted the OTA file may fail to run whereas the RUU wont.

Jonny said:
no, 3.33.401.106 is the next one then it is 3.33.401.153
However, you can just flash the RUU and it will put you on 3.33.401.153 without having to flash 3.33.401.106 - also because you are rooted the OTA file may fail to run whereas the RUU wont.
Click to expand...
Click to collapse
So i download it and stick in on my sd card and then 'install update from zip', right?

ryall999 said:
So i download it and stick in on my sd card and then 'install update from zip', right?
Click to expand...
Click to collapse
No, its a .exe file - official HTC RUU (Rom Update Utility) so you download it then run it from a windows pc

Jonny said:
No, its a .exe file - official HTC RUU (Rom Update Utility) so you download it then run it from a windows pc
Click to expand...
Click to collapse
Love how I click the link and get this 'ICXperia user website temporarily down' haha
So is it pretty straight forward once downloaded..... is there instruction somewhere?
PS will it wipe my phone? do i need to back up? and what would be the best way of doing that?

ryall999 said:
Love how I click the link and get this 'ICXperia user website temporarily down' haha
So is it pretty straight forward once downloaded..... is there instruction somewhere?
PS will it wipe my phone? do i need to back up? and what would be the best way of doing that?
Click to expand...
Click to collapse
Regardless of whether my hoster's website is down, my FTP remains up so you can still download the file using the link I posted. Its self explanatory and comes with instructions within the installer, it will wipe your phone so I would suggest doing a nandroid backup of data only then restoring data from a custom recovery (you will have to reflash the custom recovery after the RUU has finished because it will return you to stock recovery)

Jonny said:
Regardless of whether my hoster's website is down, my FTP remains up so you can still download the file using the link I posted. Its self explanatory and comes with instructions within the installer, it will wipe your phone so I would suggest doing a nandroid backup of data only then restoring data from a custom recovery (you will have to reflash the custom recovery after the RUU has finished because it will return you to stock recovery)
Click to expand...
Click to collapse
Oh i didn't realised it was your website
I'm not gonna reflash afterwards...
so will nandroid backup still work after i use the RUU if i dont flash with a custom recovery later?
PS. Will this get rid of clockworkmod or just bypass it?

ryall999 said:
Oh i didn't realised it was your website
I'm not gonna reflash afterwards...
so will nandroid backup still work after i use the RUU if i dont flash with a custom recovery later?
PS. Will this get rid of clockworkmod or just bypass it?
Click to expand...
Click to collapse
Not my website, homeworlder's (he is the hoster who gives me webspace via FTP)
My website is currently private only due to testing some stuff for custom ROMs

Jonny said:
Not my website, homeworlder's (he is the hoster who gives me webspace via FTP)
My website is currently private only due to testing some stuff for custom ROMs
Click to expand...
Click to collapse
I'm not gonna reflash afterwards...
so will nandroid backup still work after i use the RUU if i dont flash with a custom recovery later?
PS. Will this get rid of clockworkmod or just bypass it?

ryall999 said:
I'm not gonna reflash afterwards...
so will nandroid backup still work after i use the RUU if i dont flash with a custom recovery later?
PS. Will this get rid of clockworkmod or just bypass it?
Click to expand...
Click to collapse
The RUU replaces (gets rid of) clockwork mod with HTC Stock recovery, so to restore nandroid backup after RUU you will need to reflash CWM

Jonny said:
The RUU replaces (gets rid of) clockwork mod with HTC Stock recovery, so to restore nandroid backup after RUU you will need to reflash CWM
Click to expand...
Click to collapse
So i will just back everything up onto my sd card using an app off the play store
I'm sure you are getting annoyed with me by now So just say if this is the way to do it
-Backup important stuff on sd card with app
-Follow instruction on .exe
-Then i have a stock phone and it is updated
-Restore my data....

ryall999 said:
So i will just back everything up onto my sd card using an app off the play store
I'm sure you are getting annoyed with me by now So just say if this is the way to do it
-Backup important stuff on sd card with app
-Follow instruction on .exe
-Then i have a stock phone and it is updated
-Restore my data....
Click to expand...
Click to collapse
I think with an app like that you need root to use it (Titanium backup needs root) and to root you still need a custom recovery so I would just recommend the method I suggested but apart from that the method is correct

Jonny said:
I think with an app like that you need root to use it (Titanium backup needs root) and to root you still need a custom recovery so I would just recommend the method I suggested but apart from that the method is correct
Click to expand...
Click to collapse
I meant i'll backup important stuff with a normal backup app off play store.. like texts, contacts, photos etc
I want to reset my phone anyway... speed it up, maybe

ryall999 said:
I meant i'll backup important stuff with a normal backup app off play store.. like texts, contacts, photos etc
I want to reset my phone anyway... speed it up, maybe
Click to expand...
Click to collapse
then yeah thats fine

Jonny said:
then yeah thats fine
Click to expand...
Click to collapse
Thanks a lot, you've been great
I'll shove some 'thanks' throughout the thread on posts

Jonny said:
then yeah thats fine
Click to expand...
Click to collapse
Finally got round to doing this and i got an error 115
'ERROR [155~159]: IMAGE ERROR'... One of these error messages will appear when you use the incorrect RUU to update and the image file size is larger than the Flash ROM size. In this case, download the correct RUU version and try again.
Should i update to the 3.33.401.106 RUU first. If so, where do I find it?
Sorry about this

Related

[Q] CM7 to Stock 2.3.4

Hey,
I'm new to Android, and still pretty bad with it, so when I set out to flash a custom rom last week, I never bothered to setup a backup. I didn't think it was going to be as complicated to get back to the way it was when I took it out of the box. I guess I'm still use to the iPhone. Now, I'm not completely happy with my phone and am looking to go back to stock.
I've looked in to it, and it seems easy enough, but I just have a couple of questions:
Pre-CM7 I'm pretty sure my phone was GRI54, and i9020, It's now GRI40. Does this make any difference?
And, finally, where can I download an official version of this?
Any help is greatly appreciated,
Thanks.
Have a look at this thread: http://forum.xda-developers.com/showthread.php?t=1056062
Graham19 said:
Have a look at this thread: http://forum.xda-developers.com/showthread.php?t=1056062
Click to expand...
Click to collapse
I've downloaded the i9020a one, but when I'm trying to update it it's saying "Installation aborted". I tried doing it from clockwork mod - and I don't know anything about it. Do you know where I'm going wrong here?
tylerisgood said:
I've downloaded the i9020a one, but when I'm trying to update it it's saying "Installation aborted". I tried doing it from clockwork mod - and I don't know anything about it. Do you know where I'm going wrong here?
Click to expand...
Click to collapse
Use the unofficial full rom for the i9020a. apply it from cwm. Then wipe the phone
Sent from my Nexus S
Matridom said:
Use the unofficial full rom for the i9020a. apply it from cwm. Then wipe the phone
Sent from my Nexus S
Click to expand...
Click to collapse
Do you know where I can get this download from?
I haven't been able to find anything for this. The closest I found was someone saying 'use this one instead', but that got me stuck at the Google screen.
tylerisgood said:
Do you know where I can get this download from?
I haven't been able to find anything for this. The closest I found was someone saying 'use this one instead', but that got me stuck at the Google screen.
Click to expand...
Click to collapse
It is in my sticky for the 2.3.4 ota. Very first post
Sent from my Nexus S
Matridom said:
It is in my sticky for the 2.3.4 ota. Very first post
Sent from my Nexus S
Click to expand...
Click to collapse
Sorry, maybe I'm doing something wrong, but I've tried using that zip a few times (286d814dee5b.signed-sojua-GRJ22-from-GRI54.286d814d.zip 12mb) and it says install failed.
I boot into recovery, factory reset, wipe cache, install zip from sd card, pick the file, agree.
Have you checked the MD5 hash to ensure the download isn't corrupt?
Graham19 said:
Have you checked the MD5 hash to ensure the download isn't corrupt?
Click to expand...
Click to collapse
I'm incredibly new to this, and have no idea what this means. How do I try this?
Download this:
http://myunspace.com/?d=4DD679381
Install it through CWM
Wipe the phone
you now have stock 2.3.4
Matridom said:
Download this:
http://myunspace.com/?d=4DD679381
Install it through CWM
Wipe the phone
you now have stock 2.3.4
Click to expand...
Click to collapse
I love you. Thanks a lot
One last quick question:
Is it possible to get rid of clockwork?
tylerisgood said:
One last quick question:
Is it possible to get rid of clockwork?
Click to expand...
Click to collapse
yes, the default for all stock 2.3.4 roms will restore the recover back to stock on each reboots you have to rename/delete the install-recover.sh script to prevent it from happening
Matridom said:
yes, the default for all stock 2.3.4 roms will restore the recover back to stock on each reboots you have to rename/delete the install-recover.sh script to prevent it from happening
Click to expand...
Click to collapse
Sorry? I have to delete the files to keep clockwork from being removed?
All I did was flash it, restart, and clockwork was still there.
Also, my phone's internet speeds seem really slow now. Could this be from now having a different build? (GRI54 -> GRJ22)
Sorry for my complete lack of knowledge. It's quite obvious I jumped into something that's much over my head.
tylerisgood said:
Sorry? I have to delete the files to keep clockwork from being removed?
All I did was flash it, restart, and clockwork was still there.
Also, my phone's internet speeds seem really slow now. Could this be from now having a different build? (GRI54 -> GRJ22)
Sorry for my complete lack of knowledge. It's quite obvious I jumped into something that's much over my head.
Click to expand...
Click to collapse
A stock rom has the script. So flashing it will also restore stock recovery. If the rom you installed does not restore the recovery partition, the the rom was not completely stock.
Sent from my Nexus S
Matridom said:
A stock rom has the script. So flashing it will also restore stock recovery. If the rom you installed does not restore the recovery partition, the the rom was not completely stock.
Sent from my Nexus S
Click to expand...
Click to collapse
I used the rom you linked.
tylerisgood said:
I used the rom you linked.
Click to expand...
Click to collapse
I've never used it myself.
Looking over the zip file, the script has been renamed, so it's not 100% stock.
Normally you would need to root the phone to change the file name.
Perhaps renaming the file in the zip will correct the issue?
try renaming /etc/install-recovery.sh.bak to /etc/install-recovery.sh and re-apply the zip. ( no need to wipe )
That rom was posted by dsixda, he may be able to confirm what needs to be done.
If you had root, it would be fairly easy to rename it.
Matridom said:
Download this:
http://myunspace.com/?d=4DD679381
Install it through CWM
Wipe the phone
you now have stock 2.3.4
Click to expand...
Click to collapse
That was my upload, but is it confirmed that the radio in this one gets flashed to AUCKD2? I uploaded another one with the same radio but slightly different.
Matridom said:
Download this:
http://myunspace.com/?d=4DD679381
Install it through CWM
Wipe the phone
you now have stock 2.3.4
Click to expand...
Click to collapse
This doesn't seem to work. It does gets you back to stock rom but I still have the old modem I flashed, old APN, CWM Recovery and still there and factory reset doesn't works. Just hangs with the little Android guy and an exclamation mark.
Is there something like ODIN for Nexus S to go back to stock?
SpoonerPS3 said:
This doesn't seem to work. It does gets you back to stock rom but I still have the old modem I flashed, old APN, CWM Recovery and still there and factory reset doesn't works. Just hangs with the little Android guy and an exclamation mark.
Is there something like ODIN for Nexus S to go back to stock?
Click to expand...
Click to collapse
This should work:
http://android.grdlock.net/index.ph... S&PHPSESSID=9dc0c107b878587d1e0b21ec1e3130ef
This should bring you to stock 2.3.3 for the i9020a
Then apply the official patch:
http://android.clients.google.com/p...5b.signed-sojua-GRJ22-from-GRI54.286d814d.zip
This will then bring everything to stock 2.3.4 with proper baseband and recovery

[Q] recovery v5.0.0.8 for the Sensation link not working

Hi there,
I am working through the Guide to Unlocking your Sensation and the link to recovery v5.0.0.8 for the Sensation is not working.
Is there another place I can download the file?
Any help is greatly appreciated.
Thanks,
Lizzie.
Edit:
Looks like someone updated the MultiUpload Link. Thanks guys!
You may download it from here: http://download.clockworkmod.com/recoveries/ Just search for ....pyramid.img and flash from fastboot.
But I suggest you to get the latest v 5.0.2.0. Works fine in every aspect.
New CWM Version?
freco said:
But I suggest you to get the latest v 5.0.2.0. Works fine in every aspect.
Click to expand...
Click to collapse
How do I update to the new version? Will it affect the back-up files that I have already made?
Sorry if the questions seem silly.
I'm still trying to get the hang of all this!
-Lizzie
Lysiana said:
How do I update to the new version? Will it affect the back-up files that I have already made?
Sorry if the questions seem silly.
I'm still trying to get the hang of all this!
-Lizzie
Click to expand...
Click to collapse
Open up rom manager and hit the first option...it will flash to the latest CWM recovery. Your old bckups will still work.
Lysiana said:
How do I update to the new version? Will it affect the back-up files that I have already made?
Sorry if the questions seem silly.
I'm still trying to get the hang of all this!
-Lizzie
Click to expand...
Click to collapse
Make sure you are connected to the internet via mobile or wifi. Then go to Rom manager. Open the app and press Flash ClockworkMod recovery and the bottom should list your old one and the phone will flash the new one automagically
now if i try unlock bootloader with htc dev method
fastboot oem get_identifier_token ---> [ERR] command errror !!!
Edit : WrongForum ....
may i ask how to flash the .img file?
I'm using the guide to S-OFF etc...
It states to use recovery v5.0.0.8.
A file called PG58IMG, I cant find this, I've S-OFF'd and I'm looking to update and then use recovery.
What's the best file? Does it need to be the Zip file?
The-Last-Hylian said:
I'm using the guide to S-OFF etc...
It states to use recovery v5.0.0.8.
A file called PG58IMG, I cant find this, I've S-OFF'd and I'm looking to update and then use recovery.
What's the best file? Does it need to be the Zip file?
Click to expand...
Click to collapse
I have uploaded CWM 5.0.2.0 here: http://www.axifile.com/en/EC384AC809
MD5: 85b5f10c9afe33fb50396bd5f54bc7de
I just flashed it on my phone and it seemed to work fine, I was on 5.0.2.0 and still am ;-)
I uploaded and downloaded it and it's the same MD5 as the one on my phone that worked.
Just rename to PG58IMG.zip boot up from scratch (Power and Vol -), vol + to flash. When it wants to reboot after flashing pop the SD-card out and rename it after booting.
I came across this, it might be abit outdated but I'm guessing it'll work fine.
http://forum.xda-developers.com/showpost.php?p=17173579&postcount=86
I've put it into my root on my SD card, and updated it.
I'll do recovery now.
The-Last-Hylian said:
I came across this, it might be abit outdated but I'm guessing it'll work fine.
http://forum.xda-developers.com/showpost.php?p=17173579&postcount=86
I've put it into my root on my SD card, and updated it.
I'll do recovery now.
Click to expand...
Click to collapse
Hmm, version 5.8.0.2 Not certain what the differences are. I tend to stick with something that works until I need to change ;-)
Well you're winning, from zero to two versions to pick from now ;-))
gol_n_dal said:
Hmm, version 5.8.0.2 Not certain what the differences are. I tend to stick with something that works until I need to change ;-)
Well you're winning, from zero to two versions to pick from now ;-))
Click to expand...
Click to collapse
I've flashed the ROM, just rebooted... I'm guessing the first boot will take awhile.
Will all my data be on the phone?
I guess by checking System settings etc I can see if it's worked.
....I remember how frustrated I was when I found out that there were no working links anywhere. But, maybe I just didn't know how to search.
beston94 said:
....I remember how frustrated I was when I found out that there were no working links anywhere. But, maybe I just didn't know how to search.
Click to expand...
Click to collapse
I did try searching, I tried alot, I just wasn't too sure if I was finding the correct information is all.
The-Last-Hylian said:
I've flashed the ROM, just rebooted... I'm guessing the first boot will take awhile.
Will all my data be on the phone?
I guess by checking System settings etc I can see if it's worked.
Click to expand...
Click to collapse
If you're changing ROMs did you Superwipe before flashing?
If you Superwipe all data/apps on the phone will be zapped, the SD card should remain intact.
gol_n_dal said:
If you're changing ROMs did you Superwipe before flashing?
If you Superwipe all data/apps on the phone will be zapped, the SD card should remain intact.
Click to expand...
Click to collapse
Erm, I've only gone from stock to ARHD 4.1.13 so far...
All I did was S-OFF, CWM Recovery and flash the ROM on.
I haven't done anything else yet.
All my apps and data on my SD card are fine atm.
I do want to flash an ICS ROM onto my phone, I'll be following this thread: http://forum.xda-developers.com/showthread.php?t=1459767
For the firmware.
The-Last-Hylian said:
I did try searching, I tried alot, I just wasn't too sure if I was finding the correct information is all.
Click to expand...
Click to collapse
Yes, that was my exact feeling. I mean if you get a brand new £250 phone, then your not going to mess around with it, are you? No. You are going to try and get the prefect amount of information and clarity so you know you won't mess up.
The-Last-Hylian said:
Erm, I've only gone from stock to ARHD 4.1.13 so far...
All I did was S-OFF, CWM Recovery and flash the ROM on.
I haven't done anything else yet.
All my apps and data on my SD card are fine atm.
I do want to flash an ICS ROM onto my phone, I'll be following this thread: http://forum.xda-developers.com/showthread.php?t=1459767
For the firmware.
Click to expand...
Click to collapse
In the ARHD (mike's) thread there is a SuperWipe script in the downloads. Use that when changing between ROM flavours, or if recommended by the dev when changing versions. E.g., VI from 2.0.0 -> 3.0.0 required a SuperWipe.
MAKE sure you take regular Nandroid backups before/after you changing anything.
beston94 said:
Yes, that was my exact feeling. I mean if you get a brand new £250 phone, then your not going to mess around with it, are you? No. You are going to try and get the prefect amount of information and clarity so you know you won't mess up.
Click to expand...
Click to collapse
That's precisely it, I've had my Sensation for a while now and want to get the full user-experience from it. I know it is irritating for you guys to have to answer the same Q&A's over and over again, I did try reading everything but with so many answers and so many flavours it's a bit overwhelming.
I might write a guide from a noobs perspective (for noobs) on what to do...
gol_n_dal said:
In the ARHD (mike's) thread there is a SuperWipe script in the downloads. Use that when changing between ROM flavours, or if recommended by the dev when changing versions. E.g., VI from 2.0.0 -> 3.0.0 required a SuperWipe.
MAKE sure you take regular Nandroid backups before/after you changing anything.
Click to expand...
Click to collapse
Oh right ok, well I've been advised to change my recovery to EXT4, which I'll do tomorrow. Nandroid backups, is that when I go into HBOOT and choose Recovery? That's a good idea. So when I do go to update my ROM to ARHD 6.xxx for ICS I'll use Superwipe to clear out my app etc... So by using recovery I'll keep my app data/saves etc?
Root fail
I do evrything but when i get to bootloader he starts to read fails from sd card and then says phrasing****** and then nothing. How to root

How to upgrade to new latest Asus firmware through custom recovery

Check the device firmware type by going to Setting - about tablet - built number
Download the right firmware pack for your device.
http://www.asus.com/Tablet/Transformer_Pad/ASUS_Transformer_Pad_Infinity_TF700T/#download
Now extract the zip file and you will have another zip file.
Rename that zip file as "EP201_768_SDUPDATE" and place it to an external sd card if you do not have a custom recovery. If you are rooted and unlocked plus you have a custom recovery you don't need to rename it you can place it in internal sd is well.
Now turn off your device. Hold power button including the volume down button and enter custom recovery. For stock recovery it should detect it automatically and will install. once in custom recovery clear your cache and install the file with the name above or whatever name you have. once installation is complete. reboot the system be patient and you have the latest update.
You can obtain root easily using this method.
Just download the DebugfsRoot_Generic_v2.3.zip file from here
http://forum.xda-developers.com/show....php?t=1706588
extract the content and run RootDebugfs, then follow the on screen instruction and you will have root.
Make sure you have USB debugging on.
To get custom recovery. Download goomanager from playstore and you can install TWRP recovery from the option list. which is Option - install OpenRecoveryScript.
I am not responsible if you mess up your device. do these at your own risk. Nonetheless these steps work perfectly for me.
Renaming is not needed.
lafester said:
Renaming is not needed.
Click to expand...
Click to collapse
Exactly thats for people without custom recovery
Isn't this already covered here? http://forum.xda-developers.com/showthread.php?t=1833212
Sent from my EVO using xda premium
rizanx said:
Exactly thats for people without custom recovery
Click to expand...
Click to collapse
does the update push the stock recovery as well?
and root is lost right?
Yes and yes.
Sent from my HTC One X using xda premium
odeccacccp said:
does the update push the stock recovery as well?
and root is lost right?
Click to expand...
Click to collapse
Yes you will lose root.
But you can obtain root easily using this method.
Just download the DebugfsRoot_Generic_v2.3.zip file from here
http://forum.xda-developers.com/showthread.php?t=1706588
extract the content and run RootDebugfs, then follow the on screen instruction and you will have root.
oh and make sure you have USB debugging on.
sorry for the mix up. yes you do lose recovery. Download goomanager from playstore and you can install TWRP recovery from the option list.
rizanx said:
Through custom recovery stock recovery is not pushed! you will still have custom recovery. You will only lose root.
Click to expand...
Click to collapse
Wrong, flashing an official rom will make you loose the custom recover too, you will have a clean stock rom once you do that. AND also this thread has nothing to share with the development forum.
Pretoriano80 said:
Wrong, flashing an official rom will make you loose the custom recover too, you will have a clean stock rom once you do that. AND also this thread has nothing to share with the development forum.
Click to expand...
Click to collapse
+1 You WILL lose custom recovery with this method. This has all been covered before...
Sent from my EVO using xda premium
Pretoriano80 said:
Wrong, flashing an official rom will make you loose the custom recover too, you will have a clean stock rom once you do that. AND also this thread has nothing to share with the development forum.
Click to expand...
Click to collapse
Thanks for clear up.
MysticMgcn said:
Isn't this already covered here? http://forum.xda-developers.com/showthread.php?t=1833212
Sent from my EVO using xda premium
Click to expand...
Click to collapse
Where in there? Can;t find it?
1) If I am on a custom ROM can I flash the new update or I have to go back to STOCK first?
2) What's the big deal with loosing CWR and Root, it takes like 2 min to put it back, I mean there is another way to not loose it?
Thanks
I also have a question! Will this allow for OTA updates even if our bootloader is unlocked? And will we be able to flash the JB update from ASUS manually if not? Anyone know?
GRIM1337 said:
I also have a question! Will this allow for OTA updates even if our bootloader is unlocked? And will we be able to flash the JB update from ASUS manually if not? Anyone know?
Click to expand...
Click to collapse
No. when you unlocked it clearly stated no more ota updates for you.
Yes. of course you can flash manually just like any other rom.
odeccacccp said:
Where in there? Can;t find it?
1) If I am on a custom ROM can I flash the new update or I have to go back to STOCK first?
2) What's the big deal with loosing CWR and Root, it takes like 2 min to put it back, I mean there is another way to not loose it?
Thanks
Click to expand...
Click to collapse
You don't need to have stock rom. As long as you have the stock kernel your ok. You will of course lose custom recovery but its easy to download again as i have mentioned in my first post.
There is a lengthy way to do this. But why do that when it takes you literally 2 minute to root it with DebugfsRoot .
Hope it went well for you.

[ROM][22-6-14][4.4.3][6.06.401.1][Odexed]

As the tittle say, this one its a Stock ROM Sense 6.06.401.1 by HTC Android 4.4.3
Rom is made by the system dump from: HERE ( thanks @LlabTooFeR ) No Wipe ROM
Requesites:
Unlocked bootloader and Custom Recovery.
Instructions:
Go to TWRP ( tested with latest ) TWRP 2.7.1.1
( flashed over latest release 5.11.401.10 and everything its good
Select zip and flash.
One 6.06.401.1 for Custom Recovery
Mirror --> https://copy.com/XyR3yKTrjEQQ1Xyt
MD5: 43b9baece3c03ed880d0d8534f9c52bc
Stock Radio 6.06.401.1 for CustomRecovery / 4T.28.3218.04_10.33E.1718.01L ScreenPrint
Mirror --> https://copy.com/uADZQfhNhj7HqlrK
MD5: 26ac293910c7d2fbb3874ea301fe81d5
Stock Recovery 6.06.401.1
Mirror --> https://copy.com/LJAjKZl7GVwtoUaI
MD5: 07372a66ef42dfa6a6e33d8d5211d490
Happy Flashes
** For ROOT use the latest zip supplied by @Chainfire http://download.chainfire.eu/supersu
Cheers
Please dont mirror the ROM without asking perssion, if you want to use the ROM base its OK, just give apropriate credits and ask permission.
Link ON (uploaded completed)
And by stock do you mean the real HTC One GE edition rom?
Turbojugend said:
And by stock do you mean the real HTC One GE edition rom?
Click to expand...
Click to collapse
No, i mean the Sense Edition
Will add the info to OP
are we not getting complete stock version of 2.24.401.1 without root and anything ...
sagarsamtani said:
are we not getting complete stock version of 2.24.401.1 without root and anything ...
Click to expand...
Click to collapse
Well, i can put in OP a zip file, this one flashing over recovery will remove root if you want, or i can make one without root and busybox.
Wich method you prefer ?
Update:
Uploading version without ROOT and BusyBox
OP updated with ROM full stock without root and busybox...
Cheers
Hello nice job thank
Can you explain the sideload or maybe there a tread ?
JEZ69 said:
Hello nice job thank
Can you explain the sideload or maybe there a tread ?
Click to expand...
Click to collapse
Its easy, it requires ADB drivers instaled in PC and ADB commands to execute.
So, in TWRP you make a full WIPE, format data also.
Then you reboot recovery and over advanced you activate adb sideload.
Then connect phone to PC and send the zip file with command:
adb sideload name_of_the_rom.zip
Then just wait ADB send file to phone and then Recovery start flash of ROM .
danieldmm said:
Well, i can put in OP a zip file, this one flashing over recovery will remove root if you want, or i can make one without root and busybox.
Wich method you prefer ?
Update:
Uploading version without ROOT and BusyBox
Click to expand...
Click to collapse
danieldmm said:
Its easy, it requires ADB drivers instaled in PC and ADB commands to execute.
So, in TWRP you make a full WIPE, format data also.
Then you reboot recovery and over advanced you activate adb sideload.
Then connect phone to PC and send the zip file with command:
adb sideload name_of_the_rom.zip
Then just wait ADB send file to phone and then Recovery start flash of ROM .
Click to expand...
Click to collapse
Thank s for reply this work only with TWRP right?
andlast question this rom is reel stock i mean can we have ota with the non root version? with stock recovery and stock boot of course
danieldmm said:
Well, i can put in OP a zip file, this one flashing over recovery will remove root if you want, or i can make one without root and busybox.
Wich method you prefer ?
Update:
Uploading version without ROOT and BusyBox
Click to expand...
Click to collapse
Thanks thats what i wanted.. Awesome...
Sent from my iPad using Tapatalk HD
JEZ69 said:
Thank s for reply this work only with TWRP right?
andlast question this rom is reel stock i mean can we have ota with the non root version? with stock recovery and stock boot of course
Click to expand...
Click to collapse
With TWRP it works, i tested, other Recovery i dont know if they have sideload option.
Relative to OTA yes, with stock recovery you can have OTA. But i dont have stock recovery from this one since dump dont contain firmware.zip
Dont know if firmware.zip from 2.24.709.1 it will do the trick, but sincerelly i dont wait from OTA updates, its a loss of time
danieldmm said:
With TWRP it works, i tested, other Recovery i dont know if they have sideload option.
Relative to OTA yes, with stock recovery you can have OTA. But i dont have stock recovery from this one since dump dont contain firmware.zip
Dont know if firmware.zip from 2.24.709.1 it will do the trick, but sincerelly i dont wait from OTA updates, its a loss of time
Click to expand...
Click to collapse
i ask because we don t have the last ruu and for stock recovery we can have it here http://forum.xda-developers.com/showthread.php?t=2182823
is in the zip file.
you right for loos of time but I still did not unlock my devices first time i wait to do it....i mthinking about
JEZ69 said:
i ask because we don t have the last ruu and for stock recovery we can have it here http://forum.xda-developers.com/showthread.php?t=2182823
is in the zip file.
you right for loos of time but I still did not unlock my devices first time i wait to do it....i mthinking about
Click to expand...
Click to collapse
Thats correct, i did not know Mike already put the firmware zip, thanks for tell me in
Another thing, you must unlock bootloader to flash TWRP.
If needed you can have S-OFF and flash latest RUU x.xx.401.x and you are good to GO.
Cheers
Would this work with T-Mobile/AT&T versions?
Also sideloading doesn't touch the "sdcard" content right. We would just need to do a factory reset.
danieldmm said:
Thats correct, i did not know Mike already put the firmware zip, thanks for tell me in
Another thing, you must unlock bootloader to flash TWRP.
If needed you can have S-OFF and flash latest RUU x.xx.401.x and you are good to GO.
Cheers
Click to expand...
Click to collapse
thank s
brzgw said:
Would this work with T-Mobile/AT&T versions?
Also sideloading doesn't touch the "sdcard" content right. We would just need to do a factory reset.
Click to expand...
Click to collapse
Correct, it work all models EXCEPT SPRINT.
Sideload dont touch anything over sdcard but if you are in 4.1.2 base a wipe data / factory reset and a format sdcard its advised....
if i may ask, what is TugaPower?
is the second file really full stock?
hamdir said:
if i may ask, what is TugaPower?
Click to expand...
Click to collapse
Its my Nick Name over android
Here at XDA it was already taken by a guy that was pissed of at my home forum and because that over XDA i dont have this nickname.
http://www.androidpt.com/index.php?/forum/241-rom-tugapower/
Here at my home forum my nickname
danieldmm said:
Its my Nick Name over android
Here at XDA it was already taken by a guy that was pissed of at my home forum and because that over XDA i dont have this nickname.
http://www.androidpt.com/index.php?/forum/241-rom-tugapower/
Here at my home forum my nickname
Click to expand...
Click to collapse
so is the second zip file really full stock?
can i ask for a favor can someone provide the data stock apps like flashlight, calculator and the rest in separate zipfile?
i wiped and lost them

I'm a super-noob at this

Hi, I'm new to this forum and I hope I'm posting this in the right section of the forum, apologize if not.
I'm just a super-noob at this overall cell-phone terminology for Rooting, ROMs and etc.
I want to root my phone and input the new Android Jelly Bean on it (I hope that's possible)
I have no idea where to start. When I search online I found some older threads on how to but I'm not sure if it's still viable.
I'll post my phone info and see where this will go.
HTC Sensation z710e
Android version 2.3.4
Software # 1.45.401.3
When I press "power" + "vol down" I see
-Revolutionary-
Pyramid PVT ship S-OFF RL
HBOOT 1.17.1111
Any help, hopefully step by step help will be most appreciated. Thank you for your patience and if you require more info let me know
megamonkey said:
Hi, I'm new to this forum and I hope I'm posting this in the right section of the forum, apologize if not.
I'm just a super-noob at this overall cell-phone terminology for Rooting, ROMs and etc.
I want to root my phone and input the new Android Jelly Bean on it (I hope that's possible)
I have no idea where to start. When I search online I found some older threads on how to but I'm not sure if it's still viable.
I'll post my phone info and see where this will go.
HTC Sensation z710e
Android version 2.3.4
Software # 1.45.401.3
When I press "power" + "vol down" I see
-Revolutionary-
Pyramid PVT ship S-OFF RL
HBOOT 1.17.1111
Any help, hopefully step by step help will be most appreciated. Thank you for your patience and if you require more info let me know
Click to expand...
Click to collapse
firstly your device is already on S-OFF which makes things a lot easier
flash 3.33 universal from here
http://forum.xda-developers.com/showthread.php?t=1459767
follow the instuctions to the letter
and before flashing check md5 sums(important)
after that flash the new rom from recovery
done:good:
rzr86 said:
firstly your device is already on S-OFF which makes things a lot easier
flash 3.33 universal from here
http://forum.xda-developers.com/showthread.php?t=1459767
follow the instuctions to the letter
and before flashing check md5 sums(important)
after that flash the new rom from recovery
done:good:
Click to expand...
Click to collapse
Great to know my phone's already S-OFF'd
Does that mean I'm rooted or not yet?
How do I check md5 sums?
I'm really bad at this stuff and I just want as much help as possible so i don't screw up
Thanks for your help and patience
megamonkey said:
Great to know my phone's already S-OFF'd
Does that mean I'm rooted or not yet?
How do I check md5 sums?
I'm really bad at this stuff and I just want as much help as possible so i don't screw up
Thanks for your help and patience
Click to expand...
Click to collapse
probably you aren't rooted
but consider this
every custom rom comes prerooted
so there is no point to root your current one
about md5 sums:
put the zip in your sdcard
navigate with any file manager you have to that zip
tap and hold on it until it pops up a menu
go to properties
somewhere it will say show checksum or calculate checksum
it will show you a row of letters and numbers
then compare it with the one from the download link and see if it matches
note: once you flash the 3.33 universal(ics firmware) your current rom won't boot because it is a gb one
so you have to flash the new rom after upgrading your firmware
and don't forget to backup your current rom just in case
by the way do you have sdk tools installed in your pc?(adb and fastboot files)
megamonkey said:
Great to know my phone's already S-OFF'd
Does that mean I'm rooted or not yet?
How do I check md5 sums?
I'm really bad at this stuff and I just want as much help as possible so i don't screw up
Thanks for your help and patience
Click to expand...
Click to collapse
Google md5 generator for Windows. Use the first link that you find.
If you have 4ext recovery, you can check md5 there itself.
Happy to help.
Okay, I checked with an MD5 program suggested, and it codes match. Great!
How do I backup my current ROM? I've heard of Clockwork and 4Ext but doesn't it require a Root?
I plan to use to ROM. How do I flash a new ROM?
http://forum.xda-developers.com/showthread.php?t=2115520
megamonkey said:
Okay, I checked with an MD5 program suggested, and it codes match. Great!
How do I backup my current ROM? I've heard of Clockwork and 4Ext but doesn't it require a Root?
I plan to use to ROM. How do I flash a new ROM?
http://forum.xda-developers.com/showthread.php?t=2115520
Click to expand...
Click to collapse
first you have to flash 3.33 universal
also tell me do you have sdk tools installed in your pc?
rzr86 said:
first you have to flash 3.33 universal
also tell me do you have sdk tools installed in your pc?
Click to expand...
Click to collapse
Okay I'll flash the 3.33 universal
No I don't have SDK tools installed, I have no idea what that is.
Also how do I backup my current ROM?
megamonkey said:
Okay I'll flash the 3.33 universal
No I don't have SDK tools installed, I have no idea what that is.
Click to expand...
Click to collapse
wait then!
edit: from here http://forum.xda-developers.com/showthread.php?t=1661631
use only the one click root tool to root your current rom
then use the 4ext updater app to download and install 4ext recovery
link in my signature
then follow with the 3.33
---------- Post added at 10:51 PM ---------- Previous post was at 10:47 PM ----------
megamonkey said:
Also how do I backup my current ROM?
Click to expand...
Click to collapse
from recovery see my last post
since you don't have sdk tools installed start with the one click root tool
Okay so I downloaded the one click tool. I followed the steps, but when I double-click the "root" bat file. the command program pops up but it says repeatedly " 'adb' is not recognized as an internal or external command, operable program or batch file"
any idea?
megamonkey said:
Okay so I downloaded the one click tool. I followed the steps, but when I double-click the "root" bat file. the command program pops up but it says repeatedly " 'adb' is not recognized as an internal or external command, operable program or batch file"
any idea?
Click to expand...
Click to collapse
i gave an answer in the other thread
check it and lets continue here
Doesn't look like the drivers links work anymore. they got removed. Do i just download htc sync from the main htc website? does that work?
edit: do the older ones work?
edit: I downloaded HTC sync manager...still doesn't work. Can't even get my phone to sync. I'm starting to lose hope doing this
megamonkey said:
Doesn't look like the drivers links work anymore. they got removed. Do i just download htc sync from the main htc website? does that work?
edit: do the older ones work?
edit: I downloaded HTC sync manager...still doesn't work. Can't even get my phone to sync. I'm starting to lose hope doing this
Click to expand...
Click to collapse
try this one
http://www.mediafire.com/download/8dl8s3l9mr6ggr9/HTCDriver_4.1.0.001.exe
if it fails then you have to install sdk tools
http://forum.xda-developers.com/showthread.php?t=1152148
Hey rzr86, I've been away for more than a week so I wasn't able to work on the phone.
Funny thing I found out about my phone, it seems it was already rooted. Good thing because less of a hassle for me now.
So I need to download a ROM backup program, which one do you recommend? I don't seem to have one installed
megamonkey said:
Hey rzr86, I've been away for more than a week so I wasn't able to work on the phone.
Funny thing I found out about my phone, it seems it was already rooted. Good thing because less of a hassle for me now.
So I need to download a ROM backup program, which one do you recommend? I don't seem to have one installed
Click to expand...
Click to collapse
since you are rooted install 4ext updater app
from that app download and install 4ext recovery touch
link in my signature
then boot to the recovery
go to backup/restore->backup
then you can backup your current rom
after that format all partitions except sdcard from 4ext
flash the new rom
done
rzr86 said:
since you are rooted install 4ext updater app
from that app download and install 4ext recovery touch
link in my signature
then boot to the recovery
go to backup/restore->backup
then you can backup your current rom
after that format all partitions except sdcard from 4ext
flash the new rom
done
Click to expand...
Click to collapse
I still need to flash a 3.33 kernal but need a nandroid ROM backup. Does 4EXT work?
megamonkey said:
I still need to flash a 3.33 kernal but need a nandroid ROM backup. Does 4EXT work?
Click to expand...
Click to collapse
yeap 4ext works and in my previous post i was talking about nandroid backup
use first the app for 4ext and then go for 3.33 firmware
rzr86 said:
yeap 4ext works and in my previous post i was talking about nandroid backup
use first the app for 4ext and then go for 3.33 firmware
Click to expand...
Click to collapse
I got 4EXT recovery on my phone but when I went into to bootloader (power + vol down) OMG I ****ed something up...I forgot I had the firmware 3.33 zip file on my SD card and I updated so now I have firmware 3.33 and I can't boot my phone.
Can't believe I ****ed this up...any idea how to go back?
Edit: Can I use 4EXT to access my sd card and delete the PG58IMG zip from my sd card, then put in the firmware 1.17 zip and flash that?
megamonkey said:
I got 4EXT recovery on my phone but when I went into to bootloader (power + vol down) OMG I ****ed something up...I forgot I had the firmware 3.33 zip file on my SD card and I updated so now I have firmware 3.33 and I can't boot my phone.
Can't believe I ****ed this up...any idea how to go back?
Edit: Can I use 4EXT to access my sd card and delete the PG58IMG zip from my sd card, then put in the firmware 1.17 zip and flash that?
Click to expand...
Click to collapse
Eject sd card let the phone boot up than insert the sd and delete the zip, or use sd card adapter to pc and delete the zip
Sent from my HTCSensation using xda app-developers app
Mile_zdr said:
Eject sd card let the phone boot up than insert the sd and delete the zip, or use sd card adapter to pc and delete the zip
Sent from my HTCSensation using xda app-developers app
Click to expand...
Click to collapse
I can't boot up my phone because I accidentally flashed 3.33 when I'm still using gingerbread.

Categories

Resources