Database Info

[Completed] [Q] [HELP] Bricked S4 Mini (Gt-I9192) Ask Qsusb_dload driver

Hi, I tried everything at this moment and nothing happen to my s4 mini. It is hard bricked and won’t turn on, won’t charge and I don’t know what to do now. When I plug in usb on pc, it appear other driver isn’t the driver of the model named Qsusb_dload. What I can do now to make my cellphone be alive again? :/
ps: I instaled much time ago cyanogenmod with android 4.4.4 and all work perfectly, it just "dead" with no reason idk why :/

Hi,
Unfortunately that is usually not good, especially showing in the computer as QSUSB_DLOAD.
You can ask fellow device owners for help or suggestions...
http://forum.xda-developers.com/galaxy-s4-mini/help
Good luck!

KJ said:
Hi,
Unfortunately that is usually not good, especially showing in the computer as QSUSB_DLOAD.
You can ask fellow device owners for help or suggestions...
http://forum.xda-developers.com/galaxy-s4-mini/help
Good luck!
Click to expand...
Click to collapse
ok thanks. I'll try. A friend told me for charge the battery on other cellphone or universal recharger battery. I'll try this today... Anyway thank you :good:

Thank you. Thread closed.

[Completed] HELP with rooting samsung galaxy s3 with OUT PC

Ok so i have an old samsung galaxy s3 phone that i really want to root but the charging port seems to be half broken as in it charges but when i try to plug it into my computer it just charges unless i wiggle it then it turns off my USB hub but doesn't show up on my pc, i got it to kinda connect but said something like to much power can't connect. anyways I've been trying the one click root method but every one i tried says does not support IDK what to do.
I've done a factory reset to see iiif that helps but didn't.
Info
Model Number - SPH-L710
Android Version - 4.4.2
i think its Kitkat sense a K shows up when i triple click android version
Please help there has to be some one click method out there that works.

Shadowlistic said:
Ok so i have an old samsung galaxy s3 phone that i really want to root but the charging port seems to be half broken as in it charges but when i try to plug it into my computer it just charges unless i wiggle it then it turns off my USB hub but doesn't show up on my pc, i got it to kinda connect but said something like to much power can't connect. anyways I've been trying the one click root method but every one i tried says does not support IDK what to do.
I've done a factory reset to see iiif that helps but didn't.
Info
Model Number - SPH-L710
Android Version - 4.4.2
i think its Kitkat sense a K shows up when i triple click android version
Please help there has to be some one click method out there that works.
Click to expand...
Click to collapse
Hello and thank you for using XDA Assist.
We cannot provide technical support nor can other members reply to your posts here on XDA Assist but fortunately there is an XDA area dedicated to the Sprint Samsung Galaxy S3 at http://forum.xda-developers.com/galaxy-s3-sprint which would be a good starting place. I suggest you post your question with all relevant details in the friendly Q&A forum there at http://forum.xda-developers.com/galaxy-s3-sprint/help where the experts familiar with your device will be best able to guide you.
Good luck!
EDIT: Member has now posted in the suggested area. Thread closed.

[Completed] drivers for winotouch i81

i need help with the touch driver for wintouch i81
first I updated to windows 10 and that messed up the touch and g-sensor
so I installed windows 8.1 back but not the original one with the device
I got all the drivers from internet and every thing works fine but touch is still messed up,touches do register but not properly
can any one provide drivers for that device?
if anyone owns the same device please e-mail me @ [email protected]

nourz1234 said:
i need help with the touch driver for wintouch i81
first I updated to windows 10 and that messed up the touch and g-sensor
so I installed windows 8.1 back but not the original one with the device
I got all the drivers from internet and every thing works fine but touch is still messed up,touches do register but not properly
can any one provide drivers for that device?
if anyone owns the same device please e-mail me @ [email protected]
Click to expand...
Click to collapse
Hi and thank you for using XDA Assist
I couldn't find a resonable answer for your problem so i suggest you to ask over here >> Android Q&A, Help & Troubleshooting
Good luck!

okay

[Completed] Hard bricked Elephone Trunk(picture)

Dear community! I would be very glad if you could give me any assistance at reviving my Elephone Trunk(Snapdragon 410).
Today, suddenly, as I was using it, it just blanked out. I was using CM12 with xposed, worked perfectly untill now. No way to turn it on, tried this tutorial(unfortunately just for MTK devices):
youtube. com/watch?v=A3TmXtOA0IA
Windows does`t find the phone, no matter what(tried pressing volume buttons and plugging in the usb cable...). I am stuck at the point, where I wanted to do the "wire trick", but I can`t find the GND(ground) contact point to try to bridge it with the right contact on the motherboard, which would then supposedly trigger the phone recognition in Windows.
Here is the photo of the motherboard:
tinypic.com /r/ou4ljb/9
Any ideas which two contact points I should try to bridge?
Any help greatly appreciated!
P.S. since I just registered, I am unfortunately not allowed to post the links properly...

gerzaundisch said:
Dear community! I would be very glad if you could give me any assistance at reviving my Elephone Trunk(Snapdragon 410).
Today, suddenly, as I was using it, it just blanked out. I was using CM12 with xposed, worked perfectly untill now. No way to turn it on, tried this tutorial(unfortunately just for MTK devices):
youtube. com/watch?v=A3TmXtOA0IA
Windows does`t find the phone, no matter what(tried pressing volume buttons and plugging in the usb cable...). I am stuck at the point, where I wanted to do the "wire trick", but I can`t find the GND(ground) contact point to try to bridge it with the right contact on the motherboard, which would then supposedly trigger the phone recognition in Windows.
Here is the photo of the motherboard:
tinypic.com /r/ou4ljb/9
Any ideas which two contact points I should try to bridge?
Any help greatly appreciated!
P.S. since I just registered, I am unfortunately not allowed to post the links properly...
Click to expand...
Click to collapse
Hello,
Thanks for using XDA Assist.
Try posting your query in Elephone Trunk Thread or in Android Q&A,Help and Troubleshooting
___
v7
XDA Assist

[Completed] Gsmart Guru G1 data recovery

Hi,
my phone accidentaly fell down and the touchscreen is broken...Display is still working...
Do i have a chance to recover my data?
I did try OTG cable, but as I learned, OTG function is not supported on this little piece of s***. Should i try OTG cable with external power? Does it mean any difference?
Of course, I can try change the touchscreen,but its kinda hard to find and delivery from China takes around 40 days...(Not to mention it might not work)
Please help, I m kinda desperate :/
Thanks in advance,
Martin

XDA Visitor said:
Hi,
my phone accidentaly fell down and the touchscreen is broken...Display is still working...
Do i have a chance to recover my data?
I did try OTG cable, but as I learned, OTG function is not supported on this little piece of s***. Should i try OTG cable with external power? Does it mean any difference?
Of course, I can try change the touchscreen,but its kinda hard to find and delivery from China takes around 40 days...(Not to mention it might not work)
Please help, I m kinda desperate :/
Thanks in advance,
Martin
Click to expand...
Click to collapse
Greetings,
Thank you for using XDA Assist. First, you'll need to create an XDA account so you can post in other forums. After you've done that, you can ask your question here:
Questions and Answers
You'll receive expert help there.
Good luck and welcome to XDA!