Dear community! I would be very glad if you could give me any assistance at reviving my Elephone Trunk(Snapdragon 410).
Today, suddenly, as I was using it, it just blanked out. I was using CM12 with xposed, worked perfectly untill now. No way to turn it on, tried this tutorial(unfortunately just for MTK devices):
youtube. com/watch?v=A3TmXtOA0IA
Windows does`t find the phone, no matter what(tried pressing volume buttons and plugging in the usb cable...). I am stuck at the point, where I wanted to do the "wire trick", but I can`t find the GND(ground) contact point to try to bridge it with the right contact on the motherboard, which would then supposedly trigger the phone recognition in Windows.
Here is the photo of the motherboard:
tinypic.com /r/ou4ljb/9
Any ideas which two contact points I should try to bridge?
Any help greatly appreciated!
P.S. since I just registered, I am unfortunately not allowed to post the links properly...
gerzaundisch said:
Dear community! I would be very glad if you could give me any assistance at reviving my Elephone Trunk(Snapdragon 410).
Today, suddenly, as I was using it, it just blanked out. I was using CM12 with xposed, worked perfectly untill now. No way to turn it on, tried this tutorial(unfortunately just for MTK devices):
youtube. com/watch?v=A3TmXtOA0IA
Windows does`t find the phone, no matter what(tried pressing volume buttons and plugging in the usb cable...). I am stuck at the point, where I wanted to do the "wire trick", but I can`t find the GND(ground) contact point to try to bridge it with the right contact on the motherboard, which would then supposedly trigger the phone recognition in Windows.
Here is the photo of the motherboard:
tinypic.com /r/ou4ljb/9
Any ideas which two contact points I should try to bridge?
Any help greatly appreciated!
P.S. since I just registered, I am unfortunately not allowed to post the links properly...
Click to expand...
Click to collapse
Hello,
Thanks for using XDA Assist.
Try posting your query in Elephone Trunk Thread or in Android Q&A,Help and Troubleshooting
___
v7
XDA Assist
Related
Hello, I recently tried to put a custom ROM on my tablet and managed to brick it so it does not turn on, doesn't get recognized by my computer - so basically a brick.
I am now looking for a way out of this mess and would be very happy if someone could help me.
Thanks in advance.
arunbiju969 said:
Is your tab showing samsug logo,plz specify the device status,can it bootinto recovery or fast boot.
Sent from my TW800 using XDA Free mobile app
Click to expand...
Click to collapse
The device will not turn on, will not indicate charging and will not even activate the screen.
holding down the power+vol up/down also does nothing..
Yes, Win 8.1 x64
for my computer, yes (and i would like to keep it that way). i also have a win 8 comp that i dont really care about
for my tablet, no i don't.
It might be effective but it will also be expensive i think, thankyou for your help and i wish you all the best.
Hi
Thanks for writing to us at XDA Assist. Unfortunately it sounds to me like you've properly hard bricked the tablet, there's really no way out of this other than replacing the motherboard usually. I'd suggest you contact your local repair centre and organise to have it inspected.
Good luck!
Thread closed, thanks.
So, hello everyone. Long time lurker here, only signed up today. Shame on me.
Anyway... my good friend tried flashing a ROM on his device ( HTC one V) and everything went terribly wrong. I do not know what he did or what the name of the ROM is, and I have no way to find out.
If I try to turn it on it does absolutely nothing but the battery's fully charged (Battery led works). Even though it doesn't do anything, it is recognized as an external hard drive (two, actually) on my pc and the device manager actually sees the device as " HTC phone". Other than that, I couldn't do anything else.
I'm very new to this, so if anybody could lend me a hand I'd be happy. Thank you in advance.
If I forgot vital details ask away, i'm here.
Hi, thank you for using XDA Assist. It sounds like your friend had hard bricked his device. I'd see if it can be JTAG'd. You could also try asking your question here, http://forum.xda-developers.com/htc-one-v/help
Good luck and welcome to XDA. And don't forget to register on XDA
Thread closed. No response.
Hi Everyone,
I'm not sure where's the specific thread for this one. I would like to ask a help from someone here to fix my Cherry Mobile Flare XL.
What happened: I had the OTA Update from Cherry Mobile and after updating, it then boot loop.
What did I do to fix boot loop: I tried to flash the ROM(which I got from the FB group named after the phone). Unfortunately and unknowingly, I formatted the phone together with it's bootloader.
What's happening? When I'm trying to flash the Stock ROM. It gives me error 4032 in SPFlashtool. The phone isn't turning on anymore, too. Though, I'm hearing a sound everytime I connect the phone in my Windows 7 thru USB Cable(I believe it can still be detected,right?)
What did I do so far? Tried to flash the ROM using the different versions of SPFlash Tool. Used different machines and used a reliable USB cable, too.
Here's my phone' specs:
Brand: Cherry Mobile(local brand here in Philippines)
Model: Flare XL
Chipset: MediaTek MT6592M Chipset
Can please someone redirect me to the correct thread or help me with this one? It's causing me to stress a lot for weeks now as it is almost brand new
(Fvck you Cherry Mobile for giving us unstable updates. )
You can contact me as well at: [email protected]
Hoping that someone will notice this.
Thank you so much!
-Mark
kapitanlacson said:
Hi Everyone,
I'm not sure where's the specific thread for this one. I would like to ask a help from someone here to fix my Cherry Mobile Flare XL.
What happened: I had the OTA Update from Cherry Mobile and after updating, it then boot loop.
What did I do to fix boot loop: I tried to flash the ROM(which I got from the FB group named after the phone). Unfortunately and unknowingly, I formatted the phone together with it's bootloader.
What's happening? When I'm trying to flash the Stock ROM. It gives me error 4032 in SPFlashtool. The phone isn't turning on anymore, too. Though, I'm hearing a sound everytime I connect the phone in my Windows 7 thru USB Cable(I believe it can still be detected,right?)
What did I do so far? Tried to flash the ROM using the different versions of SPFlash Tool. Used different machines and used a reliable USB cable, too.
Here's my phone' specs:
Brand: Cherry Mobile(local brand here in Philippines)
Model: Flare XL
Chipset: MediaTek MT6592M Chipset
Can please someone redirect me to the correct thread or help me with this one? It's causing me to stress a lot for weeks now as it is almost brand new
(Fvck you Cherry Mobile for giving us unstable updates. )
You can contact me as well at: [email protected]
Hoping that someone will notice this.
Thank you so much!
-Mark
Click to expand...
Click to collapse
Hello and thank you for using XDA Assist.
I'm sorry to hear about your trouble. There is no forum specifically for the Cherry Mobile Flare XL but you may want to ask your question with all relevant details in the friendly general Android Q&A, Help & Troubleshooting forum at http://forum.xda-developers.com/android/help. That's a good place to start where members familiar with your device might be able to advise you. Since your device is not widely used, please be patient and give the experts plenty of time to respond.
Good luck!
Hi, I bought an old Vodaphone 845 for R350 and it was working fine untill now the touchscreen seems to have stopped being touchy. In otherwords, i cant use it. Its running Android 2.2 and i tried with an otg cable and mouse but it didnt seem to work. Is OTG supported in this phone. Anywho a touchscreen repair guide would be nice, but assistance in getting otg to work or somethig like that would be nice.
XDA Visitor said:
Hi, I bought an old Vodaphone 845 for R350 and it was working fine untill now the touchscreen seems to have stopped being touchy. In otherwords, i cant use it. Its running Android 2.2 and i tried with an otg cable and mouse but it didnt seem to work. Is OTG supported in this phone. Anywho a touchscreen repair guide would be nice, but assistance in getting otg to work or somethig like that would be nice.
Click to expand...
Click to collapse
Welcome to XDA Developers.
First, please register as a user, here > http://forum.xda-developers.com/register.php
I'm sorry, but there is not a specific forum for your device yet.
After you have registered, if you go to the following forum and post your question, hopefully one of our experts can help you > http://forum.xda-developers.com/showthread.php?t=2257421
Good luck.
Hello guys.
You are my last chance before sending phone back to seller.
So yday i bought Letv1s x500 from giztop.com. Unpacked phone and try to start it(like eveyrone would do) but phone get stuck on EUi logo.
So what i can acess:
Factory mode
Recovery mode with 2 options(will post pictures)
When i connect phone to laptop (win 8.1) it recognize phone as MTP USB device but sorts it under unspecified and i cant acess phone's memory.
Ive tried to get newest drivers from Microsoft but it wont wake up,
so here are pics of what i can do https://drive.google.com/folderview?id=0B0DYXQYlD34JSHhOcC12cEo3WXc&usp=sharing
Please if anyone have any idea iam open to it.
Thanks in advance
bump
Hi,
I can't find a solution on XDA for that, but I did find this thread dedicated to your device that many fellow owners frequent... You could ask for help here:
http://forum.xda-developers.com/android/general/letv-le-1s-released-antutu-test-score-t3234994
Thanks.
I've posted it there aswell but no solution either so i tought maybe someone else had idea what to do.
Thanks anyway.
nesseh said:
Thanks.
I've posted it there aswell but no solution either so i tought maybe someone else had idea what to do.
Thanks anyway.
Click to expand...
Click to collapse
XDA Assist is not a "helpdesk" providing technical assistance. Since your device is relatively uncommon, please be patient and give the experts plenty of time to respond.
Thread closed.