Hi Everyone,
I'm not sure where's the specific thread for this one. I would like to ask a help from someone here to fix my Cherry Mobile Flare XL.
What happened: I had the OTA Update from Cherry Mobile and after updating, it then boot loop.
What did I do to fix boot loop: I tried to flash the ROM(which I got from the FB group named after the phone). Unfortunately and unknowingly, I formatted the phone together with it's bootloader.
What's happening? When I'm trying to flash the Stock ROM. It gives me error 4032 in SPFlashtool. The phone isn't turning on anymore, too. Though, I'm hearing a sound everytime I connect the phone in my Windows 7 thru USB Cable(I believe it can still be detected,right?)
What did I do so far? Tried to flash the ROM using the different versions of SPFlash Tool. Used different machines and used a reliable USB cable, too.
Here's my phone' specs:
Brand: Cherry Mobile(local brand here in Philippines)
Model: Flare XL
Chipset: MediaTek MT6592M Chipset
Can please someone redirect me to the correct thread or help me with this one? It's causing me to stress a lot for weeks now as it is almost brand new
(Fvck you Cherry Mobile for giving us unstable updates. )
You can contact me as well at: [email protected]
Hoping that someone will notice this.
Thank you so much!
-Mark
kapitanlacson said:
Hi Everyone,
I'm not sure where's the specific thread for this one. I would like to ask a help from someone here to fix my Cherry Mobile Flare XL.
What happened: I had the OTA Update from Cherry Mobile and after updating, it then boot loop.
What did I do to fix boot loop: I tried to flash the ROM(which I got from the FB group named after the phone). Unfortunately and unknowingly, I formatted the phone together with it's bootloader.
What's happening? When I'm trying to flash the Stock ROM. It gives me error 4032 in SPFlashtool. The phone isn't turning on anymore, too. Though, I'm hearing a sound everytime I connect the phone in my Windows 7 thru USB Cable(I believe it can still be detected,right?)
What did I do so far? Tried to flash the ROM using the different versions of SPFlash Tool. Used different machines and used a reliable USB cable, too.
Here's my phone' specs:
Brand: Cherry Mobile(local brand here in Philippines)
Model: Flare XL
Chipset: MediaTek MT6592M Chipset
Can please someone redirect me to the correct thread or help me with this one? It's causing me to stress a lot for weeks now as it is almost brand new
(Fvck you Cherry Mobile for giving us unstable updates. )
You can contact me as well at: [email protected]
Hoping that someone will notice this.
Thank you so much!
-Mark
Click to expand...
Click to collapse
Hello and thank you for using XDA Assist.
I'm sorry to hear about your trouble. There is no forum specifically for the Cherry Mobile Flare XL but you may want to ask your question with all relevant details in the friendly general Android Q&A, Help & Troubleshooting forum at http://forum.xda-developers.com/android/help. That's a good place to start where members familiar with your device might be able to advise you. Since your device is not widely used, please be patient and give the experts plenty of time to respond.
Good luck!
Related
I am Using a Micromax Unite 2 (A106) And while using mobile uncle, my custom recovery was removed and i was left without one. After this, i used an app called flashgordon, which i found to flash a fix patch. When i flashed and rebooted, my phone shut down and rebboted, but has been stuck at the bootanimation for half an hour now.
I do not have a recovery to flash another rom either. I have tried lots of things but none of them seem to work and i cantg take it to micromax shop because there is not one in mt city. Can one of you please help because right now in this condition, my phone is just a rock with flashing lights. :crying::crying:
Hi, thank you for using XDA Assist. Unfortunately there is not a dedicated forum for your device on XDA. However, there is a thread with lots of good information here, http://forum.xda-developers.com/showthread.php?t=2792954 Perhaps someone there can help as they're experts on your device.
Custom ROM WIFI error with connecting to network
EDIT: I moved it to another section
afternoon_poop said:
Hi!
I have flashed LeWa OS 1.4 alpha on my ZTE V790 (kis lite), and this is not the first time I flashed this ROM, but now I get this error where WIFI can be turned on, but it cant connect, so I started ADB logcat from cmd (its pretty big, over 306 pages(I think its repeating around 20 times))
And also im kinda neww to this ADB thing and i cant figure out what the problem is. (i saw in a few places that the BSSID is all 00000... , but in Kali Linux the BSSID that loads from airdump-ng is different), and just to say, I have tried to replace wpa_supplicant.conf, but that didnt work!
SO if someone knows how to fix it, PLEASE HELP!
docs.google.com/document/d/12D24C9xejnalAsM-rthbwDi79D_i0WDOFa3jGESda_Q/edit?usp=sharing
Click to expand...
Click to collapse
Hello and thank you for using XDA Assist.
I'm sorry to hear about your trouble. There is no forum specifically for the ZTE V790 but you may want to ask your question with all relevant details in the friendly general Android Q&A, Help & Troubleshooting forum at http://forum.xda-developers.com/android/help. That's a good place to start where members familiar with your device might be able to advise you.
Good luck!
aniktanims said:
Try to repair you imei,for solve the problem,or you can use mtk droid tools
Click to expand...
Click to collapse
The IMEI is the same as on the motherboard when i type *#06# , and i dont know if i can use MTK tools, because this device has ARM v7a CPU
Hello!
I have a Galaxy Note 3 phone that no longer boots after I tried a hard reset. I maybe stupidly cleared that cache and it froze during the process making me remove that battery. Now it just flashes and goes dead when connected to power or when i try switching on.
The challenge is that I don't know the chip type though its MTK. I also am not sure if its Korean or Chinese clone going by the "fake" label.
I also see this "a3_mb_v1.0." on it and dont know if it has to do with the chip. I have tried flashing with the following roms mt6582 and mt6572 both keep getting the message that the scatter file does not match the chip.
Can anyone help me with link to a rom that works?:crying:
ifykweches said:
Hello!
I have a Galaxy Note 3 phone that no longer boots after I tried a hard reset. I maybe stupidly cleared that cache and it froze during the process making me remove that battery. Now it just flashes and goes dead when connected to power or when i try switching on.
The challenge is that I don't know the chip type though its MTK. I also am not sure if its Korean or Chinese clone going by the "fake" label.
I also see this "a3_mb_v1.0." on it and dont know if it has to do with the chip. I have tried flashing with the following roms mt6582 and mt6572 both keep getting the message that the scatter file does not match the chip.
Can anyone help me with link to a rom that works?:crying:
Click to expand...
Click to collapse
Hello and thank you for using XDA Assist.
We cannot provide technical support nor can other members reply to your posts here on XDA Assist. One thing is clear, however, what you have is NOT a Samsung Note 3 GT-N9000 if it has an MKT CPU, and no Note 3 ROM will work with it. I suggest that you ask your question with all relevant details in the friendly general Android Q&A, Help & Troubleshooting forum at http://forum.xda-developers.com/android/help. That's a good place to start where some members might recognize your device and be able to advise you. Please be patient and give the experts plenty of time to respond.
Good luck!
Please help with my device, Cherry Mobile Omega HD 2..0 build 7 NOT 49, build 7=MT6577 chipset and build 49=MT6589 chipset. Mine is with the build MT6577, The device is not booting and i think i lost the bootloader because i cant go to any mode (Recovery,Fastboot,Normal Reboot) anyone please help.
XDA Visitor said:
Please help with my device, Cherry Mobile Omega HD 2..0 build 7 NOT 49, build 7=MT6577 chipset and build 49=MT6589 chipset. Mine is with the build MT6577, The device is not booting and i think i lost the bootloader because i cant go to any mode (Recovery,Fastboot,Normal Reboot) anyone please help.
Click to expand...
Click to collapse
Hello, and welcome to XDA!
I am having problems finding specs on this device, but if it has a MicroSD slot, you could attempt a cascading boot. But to do this, you need the first 80MB or so of a functioning device (need someone who is rooted with the same device as yours and knows how to perform a dd command).
SD card slot or not, you will want to investigate/post-in this thread:
> Android Development and Hacking > Android General > Cherry mobile Omega HD (i-mobile IQ6)
This is the closest match (same MT6577 chipset) I can find for your device when it comes to your community and device experts. Please note, you will need to be registered for an XDA account to be able to post there.
Hope this helps, and good luck!
hello members of XDA maybe somebody can help me with my dilemma.
recently ....well actually today i bought the BLU STUDIO X PLUS and rooted it using KING ROOT and commenced to removing bloatware (opera ,bluhelp, etc ) and installing software that i find useful i thought since the device was rooted i could theme it as i saw fit (hence the need for root besides removal or system apps) and i installed bitskyo layers picked a theme and soft rebooted and i got stuck in a ...i wouldn't say bootloop ,but system halt. the phone freezes at the BLU LOGO and i dont know how to fix it i can get into the stock recovery and fast boot but not much else there arent much custom recoveries or ROMS out for these BLU devices because in my mind they are off brand and not mainstream but if nybody on here has the BLU STUDIO X PLUS and has made a stock IMG of there device please help me out and send it to me and show the correct way to flash it without using windows since I run solely on linux ADB and FAST BOOT can communicate with the device so if there is a way for me to flash it through there that would defintely work for me matter of factly if anyone and i mean anyone that can teach me how to build a custom rom for this device i would greatly appreciate it because i recently (before i bought my current phone ) bought the BLU STUDIO 6.0 HD and i bricked it while trying to flash it using SP Tool( i turned the phone off not realizing things take time)
Hi,
Thanks for writing to us at XDA Assist.
There is no dedicated forum for your device at this time but you may want to ask your question with all relevant details in the friendly general Android Q&A, Help & Troubleshooting forum at http://forum.xda-developers.com/android/help.
Since your device is relatively uncommon, please be patient and give the experts plenty of time to respond.