Please help with my device, Cherry Mobile Omega HD 2..0 build 7 NOT 49, build 7=MT6577 chipset and build 49=MT6589 chipset. Mine is with the build MT6577, The device is not booting and i think i lost the bootloader because i cant go to any mode (Recovery,Fastboot,Normal Reboot) anyone please help.
XDA Visitor said:
Please help with my device, Cherry Mobile Omega HD 2..0 build 7 NOT 49, build 7=MT6577 chipset and build 49=MT6589 chipset. Mine is with the build MT6577, The device is not booting and i think i lost the bootloader because i cant go to any mode (Recovery,Fastboot,Normal Reboot) anyone please help.
Click to expand...
Click to collapse
Hello, and welcome to XDA!
I am having problems finding specs on this device, but if it has a MicroSD slot, you could attempt a cascading boot. But to do this, you need the first 80MB or so of a functioning device (need someone who is rooted with the same device as yours and knows how to perform a dd command).
SD card slot or not, you will want to investigate/post-in this thread:
> Android Development and Hacking > Android General > Cherry mobile Omega HD (i-mobile IQ6)
This is the closest match (same MT6577 chipset) I can find for your device when it comes to your community and device experts. Please note, you will need to be registered for an XDA account to be able to post there.
Hope this helps, and good luck!
Related
Hi, I accidentally erased Android system files on my phone and it stopped working. I have a Chinese replica of the Samsung Galaxy S4 mini mobile device. My cell phone was manufactured by Mediatek. MTK6572 GT-I9190 with entrance to a single SIM card. I would return it to factory mode with android 4.2. One would, if possible, teach me how to reinstall the android 4.2 operating system and send me the files needed for this?
Raiom said:
Hi, I accidentally erased Android system files on my phone and it stopped working. I have a Chinese replica of the Samsung Galaxy S4 mini mobile device. My cell phone was manufactured by Mediatek. MTK6572 GT-I9190 with entrance to a single SIM card. I would return it to factory mode with android 4.2. One would, if possible, teach me how to reinstall the android 4.2 operating system and send me the files needed for this?
Click to expand...
Click to collapse
Please check this thread: Mediatek GT-I9190(S4 MINI ) , MTK6572 bricked!.
It's about (nearly) the same issue.
You can also check this thread: [UTIL][WIN][MT65xx] MTK Droid Root & Tools | MediaTek Android Smartphone ... but it's for developers only.
So if you need further help, please ask in the General discussion > Questions and Answers forum.
Good luck !
Tutorial, programs for installation and other necessary files
It_ler said:
Please check this thread: Mediatek GT-I9190(S4 MINI ) , MTK6572 bricked!.
It's about (nearly) the same issue.
You can also check this thread: [UTIL][WIN][MT65xx] MTK Droid Root & Tools | MediaTek Android Smartphone ... but it's for developers only.
So if you need further help, please ask in the General discussion > Questions and Answers forum.
Good luck !
Click to expand...
Click to collapse
I found nothing specific concerning my device.
I need a tutorial, programs for installation and other necessary files. Can you help me?
I thank you.
Raiom said:
I found nothing specific concerning my device.
I need a tutorial, programs for installation and other necessary files. Can you help me?
I thank you.
Click to expand...
Click to collapse
No, sorry.
Please ask in the Q&A forum I linked in my previous answer.
Good luck !
EDIT: Thread closed and thank you.
hi everyone
well i recently flashed my landvo l200g after bricking it with a rom which was on www.needroms.com that stated it was for my model, now after i flashed it i lost my iemi no but have now sorted that out using uncletools. but what i did notice was when booting the phone up i was getting the android logo at start of boot then i was getting (now this the strange bit) the lenovo logo that turns into a butterfly.
so anyway now if i dial *#06# i get my iemi no but sim card is not detected and when i try to use sim tool kit app it dont work and as 00kb size, also the sim management is greyed out and if i try to install a downloaded sim tk i get a signature error but i cant understand how to sort that bit out as cant find the apk now which i downloaded earlier, also when i got the error i try'd to just change the apk name by adding a number and it said was done but cant find the apk file now ha ha
so as you can imagine ive had a week of stress and pulling hair out trying to get out of brick and then trying to get iemi back kept re bricking then spft wouldnt always work so now i need your help guys in trying to get service back all advise welcome and big thanks in advance
ps i flashed this rom 1479MPF.S49.GEMINI.LN.8P32.20140922.QHD.CN.COM.WB1 25.FB37.COM – KOT49H – V1_WCDMA which said was this ROM Mobile Landvo L200G – ROM Android 4.4.2
ONLY MT6582
Official ROM Landvo L200G version: ALPS.KK1.MP3.V1.11 – 1479MPF.S49.GEMINI.LN.8P32.20140922.QHD.CN.COM.WB1 25.FB37.COM – KOT49H – V1_WCDMA
Gapps include – No Rooted
Language support : Multilang
this is thread i got it from Thread: [ROM]For LANDVO L200G Smartphone
ive attached the rom script incase someone can understand it all and see where the mistake might be thats causing the no service even
conner
Hi there,
I'm sorry but I can't find anything relevant to your question/device except this thread: LANDVO L200G with 4G LTE (MT6582 + MT6290) 1Gb RAM
Please post that in the forum bellow for more answers from the experts:
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck
Custom ROM WIFI error with connecting to network
EDIT: I moved it to another section
afternoon_poop said:
Hi!
I have flashed LeWa OS 1.4 alpha on my ZTE V790 (kis lite), and this is not the first time I flashed this ROM, but now I get this error where WIFI can be turned on, but it cant connect, so I started ADB logcat from cmd (its pretty big, over 306 pages(I think its repeating around 20 times))
And also im kinda neww to this ADB thing and i cant figure out what the problem is. (i saw in a few places that the BSSID is all 00000... , but in Kali Linux the BSSID that loads from airdump-ng is different), and just to say, I have tried to replace wpa_supplicant.conf, but that didnt work!
SO if someone knows how to fix it, PLEASE HELP!
docs.google.com/document/d/12D24C9xejnalAsM-rthbwDi79D_i0WDOFa3jGESda_Q/edit?usp=sharing
Click to expand...
Click to collapse
Hello and thank you for using XDA Assist.
I'm sorry to hear about your trouble. There is no forum specifically for the ZTE V790 but you may want to ask your question with all relevant details in the friendly general Android Q&A, Help & Troubleshooting forum at http://forum.xda-developers.com/android/help. That's a good place to start where members familiar with your device might be able to advise you.
Good luck!
aniktanims said:
Try to repair you imei,for solve the problem,or you can use mtk droid tools
Click to expand...
Click to collapse
The IMEI is the same as on the motherboard when i type *#06# , and i dont know if i can use MTK tools, because this device has ARM v7a CPU
Hi Everyone,
I'm not sure where's the specific thread for this one. I would like to ask a help from someone here to fix my Cherry Mobile Flare XL.
What happened: I had the OTA Update from Cherry Mobile and after updating, it then boot loop.
What did I do to fix boot loop: I tried to flash the ROM(which I got from the FB group named after the phone). Unfortunately and unknowingly, I formatted the phone together with it's bootloader.
What's happening? When I'm trying to flash the Stock ROM. It gives me error 4032 in SPFlashtool. The phone isn't turning on anymore, too. Though, I'm hearing a sound everytime I connect the phone in my Windows 7 thru USB Cable(I believe it can still be detected,right?)
What did I do so far? Tried to flash the ROM using the different versions of SPFlash Tool. Used different machines and used a reliable USB cable, too.
Here's my phone' specs:
Brand: Cherry Mobile(local brand here in Philippines)
Model: Flare XL
Chipset: MediaTek MT6592M Chipset
Can please someone redirect me to the correct thread or help me with this one? It's causing me to stress a lot for weeks now as it is almost brand new
(Fvck you Cherry Mobile for giving us unstable updates. )
You can contact me as well at: [email protected]
Hoping that someone will notice this.
Thank you so much!
-Mark
kapitanlacson said:
Hi Everyone,
I'm not sure where's the specific thread for this one. I would like to ask a help from someone here to fix my Cherry Mobile Flare XL.
What happened: I had the OTA Update from Cherry Mobile and after updating, it then boot loop.
What did I do to fix boot loop: I tried to flash the ROM(which I got from the FB group named after the phone). Unfortunately and unknowingly, I formatted the phone together with it's bootloader.
What's happening? When I'm trying to flash the Stock ROM. It gives me error 4032 in SPFlashtool. The phone isn't turning on anymore, too. Though, I'm hearing a sound everytime I connect the phone in my Windows 7 thru USB Cable(I believe it can still be detected,right?)
What did I do so far? Tried to flash the ROM using the different versions of SPFlash Tool. Used different machines and used a reliable USB cable, too.
Here's my phone' specs:
Brand: Cherry Mobile(local brand here in Philippines)
Model: Flare XL
Chipset: MediaTek MT6592M Chipset
Can please someone redirect me to the correct thread or help me with this one? It's causing me to stress a lot for weeks now as it is almost brand new
(Fvck you Cherry Mobile for giving us unstable updates. )
You can contact me as well at: [email protected]
Hoping that someone will notice this.
Thank you so much!
-Mark
Click to expand...
Click to collapse
Hello and thank you for using XDA Assist.
I'm sorry to hear about your trouble. There is no forum specifically for the Cherry Mobile Flare XL but you may want to ask your question with all relevant details in the friendly general Android Q&A, Help & Troubleshooting forum at http://forum.xda-developers.com/android/help. That's a good place to start where members familiar with your device might be able to advise you. Since your device is not widely used, please be patient and give the experts plenty of time to respond.
Good luck!
I actually didn't get any driver ( I did try the universal ADB driver, but it didn't work ) or any custom recovery for my lava iris alfa l, so after doing a lot of research and tries, i gave up and thought of flashing a recovery of a different phone but of the same brand (lava) and same hardware (MT 6582) so my concern was if something goes wrong maybe I wouldn't even be able to access the stock recovery and it would be impossible to fix my bricked phone. If any dev can say wheather it is safe or not it would be a real help or anybody who has tried it please suggest me what should I do.
My android's specs (i used cpu z)
Its a lava iris alfa l
Media tek Mt6582 1.30 GHz
Cores 4
Architecture 4x ARM Cortex-A7 @ 1.30 GHz
Kernel architecture armv7I
My kind request for help and a reply ASAP
Hi,
Thanks for using XDA assist.
I couldn't find any useful information about your device running a custom recovery on XDA. It is highly likely that if you flash a recovery from a different device, something will go wrong.
If you still have any further questions, please create a XDA account and post in the following forum below:
Android Q&A, Help & Troubleshooting
Good Luck! - gsstudios
what about htc ?
What if i tried it to htc desire 516