I actually didn't get any driver ( I did try the universal ADB driver, but it didn't work ) or any custom recovery for my lava iris alfa l, so after doing a lot of research and tries, i gave up and thought of flashing a recovery of a different phone but of the same brand (lava) and same hardware (MT 6582) so my concern was if something goes wrong maybe I wouldn't even be able to access the stock recovery and it would be impossible to fix my bricked phone. If any dev can say wheather it is safe or not it would be a real help or anybody who has tried it please suggest me what should I do.
My android's specs (i used cpu z)
Its a lava iris alfa l
Media tek Mt6582 1.30 GHz
Cores 4
Architecture 4x ARM Cortex-A7 @ 1.30 GHz
Kernel architecture armv7I
My kind request for help and a reply ASAP
Hi,
Thanks for using XDA assist.
I couldn't find any useful information about your device running a custom recovery on XDA. It is highly likely that if you flash a recovery from a different device, something will go wrong.
If you still have any further questions, please create a XDA account and post in the following forum below:
Android Q&A, Help & Troubleshooting
Good Luck! - gsstudios
what about htc ?
What if i tried it to htc desire 516
Related
Hi Everyone,
I'm not sure where's the specific thread for this one. I would like to ask a help from someone here to fix my Cherry Mobile Flare XL.
What happened: I had the OTA Update from Cherry Mobile and after updating, it then boot loop.
What did I do to fix boot loop: I tried to flash the ROM(which I got from the FB group named after the phone). Unfortunately and unknowingly, I formatted the phone together with it's bootloader.
What's happening? When I'm trying to flash the Stock ROM. It gives me error 4032 in SPFlashtool. The phone isn't turning on anymore, too. Though, I'm hearing a sound everytime I connect the phone in my Windows 7 thru USB Cable(I believe it can still be detected,right?)
What did I do so far? Tried to flash the ROM using the different versions of SPFlash Tool. Used different machines and used a reliable USB cable, too.
Here's my phone' specs:
Brand: Cherry Mobile(local brand here in Philippines)
Model: Flare XL
Chipset: MediaTek MT6592M Chipset
Can please someone redirect me to the correct thread or help me with this one? It's causing me to stress a lot for weeks now as it is almost brand new
(Fvck you Cherry Mobile for giving us unstable updates. )
You can contact me as well at: [email protected]
Hoping that someone will notice this.
Thank you so much!
-Mark
kapitanlacson said:
Hi Everyone,
I'm not sure where's the specific thread for this one. I would like to ask a help from someone here to fix my Cherry Mobile Flare XL.
What happened: I had the OTA Update from Cherry Mobile and after updating, it then boot loop.
What did I do to fix boot loop: I tried to flash the ROM(which I got from the FB group named after the phone). Unfortunately and unknowingly, I formatted the phone together with it's bootloader.
What's happening? When I'm trying to flash the Stock ROM. It gives me error 4032 in SPFlashtool. The phone isn't turning on anymore, too. Though, I'm hearing a sound everytime I connect the phone in my Windows 7 thru USB Cable(I believe it can still be detected,right?)
What did I do so far? Tried to flash the ROM using the different versions of SPFlash Tool. Used different machines and used a reliable USB cable, too.
Here's my phone' specs:
Brand: Cherry Mobile(local brand here in Philippines)
Model: Flare XL
Chipset: MediaTek MT6592M Chipset
Can please someone redirect me to the correct thread or help me with this one? It's causing me to stress a lot for weeks now as it is almost brand new
(Fvck you Cherry Mobile for giving us unstable updates. )
You can contact me as well at: [email protected]
Hoping that someone will notice this.
Thank you so much!
-Mark
Click to expand...
Click to collapse
Hello and thank you for using XDA Assist.
I'm sorry to hear about your trouble. There is no forum specifically for the Cherry Mobile Flare XL but you may want to ask your question with all relevant details in the friendly general Android Q&A, Help & Troubleshooting forum at http://forum.xda-developers.com/android/help. That's a good place to start where members familiar with your device might be able to advise you. Since your device is not widely used, please be patient and give the experts plenty of time to respond.
Good luck!
Please help with my device, Cherry Mobile Omega HD 2..0 build 7 NOT 49, build 7=MT6577 chipset and build 49=MT6589 chipset. Mine is with the build MT6577, The device is not booting and i think i lost the bootloader because i cant go to any mode (Recovery,Fastboot,Normal Reboot) anyone please help.
XDA Visitor said:
Please help with my device, Cherry Mobile Omega HD 2..0 build 7 NOT 49, build 7=MT6577 chipset and build 49=MT6589 chipset. Mine is with the build MT6577, The device is not booting and i think i lost the bootloader because i cant go to any mode (Recovery,Fastboot,Normal Reboot) anyone please help.
Click to expand...
Click to collapse
Hello, and welcome to XDA!
I am having problems finding specs on this device, but if it has a MicroSD slot, you could attempt a cascading boot. But to do this, you need the first 80MB or so of a functioning device (need someone who is rooted with the same device as yours and knows how to perform a dd command).
SD card slot or not, you will want to investigate/post-in this thread:
> Android Development and Hacking > Android General > Cherry mobile Omega HD (i-mobile IQ6)
This is the closest match (same MT6577 chipset) I can find for your device when it comes to your community and device experts. Please note, you will need to be registered for an XDA account to be able to post there.
Hope this helps, and good luck!
First of all hi everyone .
I have been having a bit of trouble with my Grand HD 10.1 a33 tablet pc .
easy to say i screwed up at some point ,
anyways i tried several image files , and there where a few that worked , except for the fact that touchscreen was not working ,wifi was not working , camera was not working , all that i have tried gave the same error.
Now i opened the tablet , and got the board wich i believe to be this one :
- MB1019Q5 A33 V1.2 2015-04-24
there where several other info inside , aldo i dont think its relevant ill leave the info here:
- MB1019Q5-WIFI-A
- HRJ-W2272A
So if u guys could help me out on finding a suitable firmware for this tablet i would appreciate it .
More specs from it :
10.1 Digital HD capacitive touch(5 touch) 1024*600
allwinner a33 arm córtex a7
mali400 mp2 dual core
os android lollipop 5.1
etc, etc
p.s.: after installing the previous firmwares the screen was also upside down
milesritzy said:
I took sometime to find out a reliable site to download ur firmawares for A33 tablets, check it out at mytabletguru.com
Click to expand...
Click to collapse
unfortunately , i had already been there and tested a few of them , same problem
Hi,
Thanks for writing to us at XDA Assist.
There is no dedicated forum for your device at this time but you may want to ask your question with all relevant details in the friendly general Android Q&A, Help & Troubleshooting forum at http://forum.xda-developers.com/android/help.
Since your device is relatively uncommon, please be patient and give the experts plenty of time to respond.
Good luck!
Hi everyone.
Hi have a Wiko Highway Octa Core 3G 2.0GHz based on the Mediatek MT6592 SoC.
My phone got bricked and I can't seem to find instructions on how to get it to go into Meta Mode to try and flash it, since this phone does not have a removable battery and the instructions that I find are not specific for this device. And it only has Power, Vol+ and Vol- physical buttons
I did not try to install a custom ROM, this happened re-flashing the original Wiko ROM from http://support.wikomobile.com/maj/HIGHWAY_KITKAT_V19.zip.
It doesn't even lit up the charging LED, but I have the MTK Preloader visible in the Windows Device Manager.
Could someone please point me to a user that might be able to check this?
Thank you.
Bless! S.
sensis said:
Hi everyone.
Hi have a Wiko Highway Octa Core 3G 2.0GHz based on the Mediatek MT6592 SoC.
My phone got bricked and I can't seem to find instructions on how to get it to go into Meta Mode to try and flash it, since this phone does not have a removable battery and the instructions that I find are not specific for this device. And it only has Power, Vol+ and Vol- physical buttons
I did not try to install a custom ROM, this happened re-flashing the original Wiko ROM from http://support.wikomobile.com/maj/HIGHWAY_KITKAT_V19.zip.
It doesn't even lit up the charging LED, but I have the MTK Preloader visible in the Windows Device Manager.
Could someone please point me to a user that might be able to check this?
Thank you.
Bless! S.
Click to expand...
Click to collapse
Hi Sensis
Thank you for using XDA Assist
As we do not have an specific forum dedicated for your device yet, our experts at the below forum should be able to help you. Please be welcome to post over in there.
Android Q&A, Help & Troubleshooting
Nice regards and good luck.
.
Thank you for the info.
Sir i have bought videocon cube 3 (V50JL). it works on Android Marshamallow platform. It is having Mediatek mt735v Chipset with mali t720 cpu. #gb Ram And 32GB Rom with 25GB user memory. I have tried to root it with many mobile and pc apps but unsuccesfull doing that. Tried to install twrp with adb but after oem unlocking the phone stuck to bootloader.
The problem with the software is , it doesn't support different ringtone for different sim, even the for the same doesn't work.
For offscreen gestures they put the only option to activate all the four or deactivate all of them. No option to on which one i want.
No otg support.
Please guide me to some good Custom ROM for it to short all this issues.
I have gave the phone to service center and asked them that i want it rooted, but i don't think they will do it.
so please guide me to rooting process for the same.
Hi there and welcome to assist,
Unfortunately there is nothing about your question/device on XDA forum. Try a Google search first.
You'll have to create an account to post in the main forums if you have any other questions.
Good luck