Hello!
I have a Galaxy Note 3 phone that no longer boots after I tried a hard reset. I maybe stupidly cleared that cache and it froze during the process making me remove that battery. Now it just flashes and goes dead when connected to power or when i try switching on.
The challenge is that I don't know the chip type though its MTK. I also am not sure if its Korean or Chinese clone going by the "fake" label.
I also see this "a3_mb_v1.0." on it and dont know if it has to do with the chip. I have tried flashing with the following roms mt6582 and mt6572 both keep getting the message that the scatter file does not match the chip.
Can anyone help me with link to a rom that works?:crying:
ifykweches said:
Hello!
I have a Galaxy Note 3 phone that no longer boots after I tried a hard reset. I maybe stupidly cleared that cache and it froze during the process making me remove that battery. Now it just flashes and goes dead when connected to power or when i try switching on.
The challenge is that I don't know the chip type though its MTK. I also am not sure if its Korean or Chinese clone going by the "fake" label.
I also see this "a3_mb_v1.0." on it and dont know if it has to do with the chip. I have tried flashing with the following roms mt6582 and mt6572 both keep getting the message that the scatter file does not match the chip.
Can anyone help me with link to a rom that works?:crying:
Click to expand...
Click to collapse
Hello and thank you for using XDA Assist.
We cannot provide technical support nor can other members reply to your posts here on XDA Assist. One thing is clear, however, what you have is NOT a Samsung Note 3 GT-N9000 if it has an MKT CPU, and no Note 3 ROM will work with it. I suggest that you ask your question with all relevant details in the friendly general Android Q&A, Help & Troubleshooting forum at http://forum.xda-developers.com/android/help. That's a good place to start where some members might recognize your device and be able to advise you. Please be patient and give the experts plenty of time to respond.
Good luck!
Related
Ok Here the thing my S2 GT-I1900G was broken well my mistake because during installing a rom in recovery it failed and i just reboot it like that and another thing is there is no backup/stock rom in the internal sd because my brother deleted it.Later on,the phone became soft bricked but i used the same method to fix it with using odin but doesnt work? it stuck at boot loop and stay like that,i flashed stock rom and alot of things to try to fix it based i found on google but still doesnt find a way.And delete dalvik caches also doesnt work i hope u can help me figure this out.
Hi,
You can ask for help here,
> Samsung Galaxy S II I9100 > Galaxy S II Q&A, Help & Troubleshooting
Just be sure to specify your exact model number, as that's the forum for i9000. But yours is covered in that section too. And don't ever flash anything that wasn't made for your exact model also.
Good luck!
Thank you. Thread closed.
Hello friend i m new user, i have problem witch guophone G9500L
Quad core 6589
WVGA 854x480
Rom 4GB
Ram 1GB
problem is when i use oficial rom witch site needrom
now i have big problem phone work but lcd is white and have green line, nothing see.
How can i return to good condition phone ? I try to load many frimeware, and always show white lcd and line. LCD is good before flash all is good.
I think problem is driver lcd, can you hellp me ?
Hi,
I can't find anything relevant on XDA for your device and issue. It sure looks like a hardware issue, but it could be software. Be sure the firmware you are flashing is for your exact model number, nothing else. If it still acts this way, I'd contact the manufacturer.
You can ask for other opinions here though if you wish,
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck!
Darth said:
Hi,
I can't find anything relevant on XDA for your device and issue. It sure looks like a hardware issue, but it could be software. Be sure the firmware you are flashing is for your exact model number, nothing else. If it still acts this way, I'd contact the manufacturer.
You can ask for other opinions here though if you wish,
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck!
Click to expand...
Click to collapse
So, can t use other rom, except chage botloader ??
I try to load many frimeware but always have white lcd?
Cant load similar frimeware ?
You can try a custom rom.... But I'm not sure what you mean by you tried many firmwares? If you flashed firmware made for any other device, except your exact model.... You could have damaged the device.
But please, ask for further help in the thread I linked. I've found nothing that can help you unfortunately.
Thanks!
Darth said:
You can try a custom rom.... But I'm not sure what you mean by you tried many firmwares? If you flashed firmware made for any other device, except your exact model.... You could have damaged the device.
But please, ask for further help in the thread I linked. I've found nothing that can help you unfortunately.
Thanks!
Click to expand...
Click to collapse
i try to load rom via needrom with different firmware, and never brick phone, marked by botloader and upgrade frimeware, phone powers on but there are different forms of the white screen, on the other is completely white and the other with black and green line, can be heard as the phone starts up, running, but no image.
Can you send me link to custom rom ? witch i can try load.
I already said, I can't find anything relevant on XDA for your device. And I gave you a link to post in for help.
XDA Assist is here to help navigate the site, not for support..... And I have pointed you to where to ask for help.
Thanks for understanding, thread closed.
Hi Everyone,
I'm not sure where's the specific thread for this one. I would like to ask a help from someone here to fix my Cherry Mobile Flare XL.
What happened: I had the OTA Update from Cherry Mobile and after updating, it then boot loop.
What did I do to fix boot loop: I tried to flash the ROM(which I got from the FB group named after the phone). Unfortunately and unknowingly, I formatted the phone together with it's bootloader.
What's happening? When I'm trying to flash the Stock ROM. It gives me error 4032 in SPFlashtool. The phone isn't turning on anymore, too. Though, I'm hearing a sound everytime I connect the phone in my Windows 7 thru USB Cable(I believe it can still be detected,right?)
What did I do so far? Tried to flash the ROM using the different versions of SPFlash Tool. Used different machines and used a reliable USB cable, too.
Here's my phone' specs:
Brand: Cherry Mobile(local brand here in Philippines)
Model: Flare XL
Chipset: MediaTek MT6592M Chipset
Can please someone redirect me to the correct thread or help me with this one? It's causing me to stress a lot for weeks now as it is almost brand new
(Fvck you Cherry Mobile for giving us unstable updates. )
You can contact me as well at: [email protected]
Hoping that someone will notice this.
Thank you so much!
-Mark
kapitanlacson said:
Hi Everyone,
I'm not sure where's the specific thread for this one. I would like to ask a help from someone here to fix my Cherry Mobile Flare XL.
What happened: I had the OTA Update from Cherry Mobile and after updating, it then boot loop.
What did I do to fix boot loop: I tried to flash the ROM(which I got from the FB group named after the phone). Unfortunately and unknowingly, I formatted the phone together with it's bootloader.
What's happening? When I'm trying to flash the Stock ROM. It gives me error 4032 in SPFlashtool. The phone isn't turning on anymore, too. Though, I'm hearing a sound everytime I connect the phone in my Windows 7 thru USB Cable(I believe it can still be detected,right?)
What did I do so far? Tried to flash the ROM using the different versions of SPFlash Tool. Used different machines and used a reliable USB cable, too.
Here's my phone' specs:
Brand: Cherry Mobile(local brand here in Philippines)
Model: Flare XL
Chipset: MediaTek MT6592M Chipset
Can please someone redirect me to the correct thread or help me with this one? It's causing me to stress a lot for weeks now as it is almost brand new
(Fvck you Cherry Mobile for giving us unstable updates. )
You can contact me as well at: [email protected]
Hoping that someone will notice this.
Thank you so much!
-Mark
Click to expand...
Click to collapse
Hello and thank you for using XDA Assist.
I'm sorry to hear about your trouble. There is no forum specifically for the Cherry Mobile Flare XL but you may want to ask your question with all relevant details in the friendly general Android Q&A, Help & Troubleshooting forum at http://forum.xda-developers.com/android/help. That's a good place to start where members familiar with your device might be able to advise you. Since your device is not widely used, please be patient and give the experts plenty of time to respond.
Good luck!
Hello, I made an error when adjusting the devlik heap size, after rebooting phone, it would only come up to the Black screen with Samsung Galaxy core prime, I use this phone for work, and I am in IT, just not so much with Android. I actually bought another phone exactly like it and have been trying to transfer the original build.prop from the new phone into the old one(I have 15 days to return it if I can fix it). I have searched for Rom's and anything that could help, but have been unsuccessful at this time, so I am hoping someone here may be able to point me in the right direction. There is no twrp files available either, just fyi.
Thank you in advance.
Hello,
Thanks for using XDA Assist.
Try posting your query in Galaxy Core Prime Discussion.Experts there may be able to help you.
___
v7
XDA Assist
Phone: Asus Zenfone 2
Model: ZE551ML
CPU: Quad-core 2.3Ghz
RAM: 4GB
Storage: 32Gb
Root: Used QuickRoot to gain root privileges
Bootloader: Not unlocked, at least not intentionally...
Hello dear XDA members,
I am posting this because I have quite unusual problem with my Recovery Mode.
Like everybody else here I rooted my phone to get rid of the pre-installed cra.. I mean BloatAware. After the root everything was successful and I managed to delete all the apps that I am not going to use and that I don't need. I didn't delete any of the key modules except S-KEY Cleaner if that is of some relevance.
So how all this happened?
I was looking into flashing ROM called BlissPop because Lolipop has a RAM leak and I find it quite annoying. So I started doing the steps...
I think my recovery stopped working after I installed TWRP app from Google Play store and tried to make a recovery.
I prepared all the zip folders on my phone and turned off my phone. I used Power key + Vol UP to get to the menu.
There are few of the lines missing like "Secure_Boot - ?" and "Signing - ?" which doesnt seem to be the case when I looked at other threads.
When I press power button to select Recovery Mode it just reboots and pops up the same menu. No error messages or pictures on the screen.
Dont forget that I didnt NOT unlock bootloader.
So.. Does anybody knows what is the problem and what should I do? Because I want that Blisspop so bad. To add to that I am a full time traveler at the moment and I cant afford to brick my phone as I am 35.000km away from home.
If anybody has the time and energy to explain me step by step process how to do all that + how to flash BlissPop ROM and Gapps I would sincerely appreciate it.
If I missed any relevant detail please ask and Ill try my best to answer as accurately as possible.
Thank you so much for your time.
P.S. I cant post outside link, but if you want the picture Ill send it by phone, mail, or whatever.
Hi
Welcome to xda.
Thanks for being so thorough and descriptive in your question. That makes it much easier for people to provide help.
Your devices Q&A is located here > Asus ZenFone 2 > ZenFone 2 Q&A, Help & Troubleshooting.
If you don't find any information regarding your problem then feel free to post your question here [GENERAL HELP] Post Your Questions Here Instead of Making a New Thread or make a new thread in Q&A.
Hello again guys!
I think I am on the right track. I did my homework and read a lot of threads about bootloaders and recoveries. I will test it out soon and tell you guys if I managed to fix it and what did it take.
Wish me luck!
civelja5 said:
Hello again guys!
I think I am on the right track. I did my homework and read a lot of threads about bootloaders and recoveries. I will test it out soon and tell you guys if I managed to fix it and what did it take.
Wish me luck!
Click to expand...
Click to collapse
Well done mate Good to see you found your way.
As this is resolved I'll have to close this thread now. Enjoy the site. :good: