Hello, I recently tried to put a custom ROM on my tablet and managed to brick it so it does not turn on, doesn't get recognized by my computer - so basically a brick.
I am now looking for a way out of this mess and would be very happy if someone could help me.
Thanks in advance.
arunbiju969 said:
Is your tab showing samsug logo,plz specify the device status,can it bootinto recovery or fast boot.
Sent from my TW800 using XDA Free mobile app
Click to expand...
Click to collapse
The device will not turn on, will not indicate charging and will not even activate the screen.
holding down the power+vol up/down also does nothing..
Yes, Win 8.1 x64
for my computer, yes (and i would like to keep it that way). i also have a win 8 comp that i dont really care about
for my tablet, no i don't.
It might be effective but it will also be expensive i think, thankyou for your help and i wish you all the best.
Hi
Thanks for writing to us at XDA Assist. Unfortunately it sounds to me like you've properly hard bricked the tablet, there's really no way out of this other than replacing the motherboard usually. I'd suggest you contact your local repair centre and organise to have it inspected.
Good luck!
Thread closed, thanks.
Related
Hi, I tried everything at this moment and nothing happen to my s4 mini. It is hard bricked and won’t turn on, won’t charge and I don’t know what to do now. When I plug in usb on pc, it appear other driver isn’t the driver of the model named Qsusb_dload. What I can do now to make my cellphone be alive again? :/
ps: I instaled much time ago cyanogenmod with android 4.4.4 and all work perfectly, it just "dead" with no reason idk why :/
Hi,
Unfortunately that is usually not good, especially showing in the computer as QSUSB_DLOAD.
You can ask fellow device owners for help or suggestions...
http://forum.xda-developers.com/galaxy-s4-mini/help
Good luck!
KJ said:
Hi,
Unfortunately that is usually not good, especially showing in the computer as QSUSB_DLOAD.
You can ask fellow device owners for help or suggestions...
http://forum.xda-developers.com/galaxy-s4-mini/help
Good luck!
Click to expand...
Click to collapse
ok thanks. I'll try. A friend told me for charge the battery on other cellphone or universal recharger battery. I'll try this today... Anyway thank you :good:
Thank you. Thread closed.
So, hello everyone. Long time lurker here, only signed up today. Shame on me.
Anyway... my good friend tried flashing a ROM on his device ( HTC one V) and everything went terribly wrong. I do not know what he did or what the name of the ROM is, and I have no way to find out.
If I try to turn it on it does absolutely nothing but the battery's fully charged (Battery led works). Even though it doesn't do anything, it is recognized as an external hard drive (two, actually) on my pc and the device manager actually sees the device as " HTC phone". Other than that, I couldn't do anything else.
I'm very new to this, so if anybody could lend me a hand I'd be happy. Thank you in advance.
If I forgot vital details ask away, i'm here.
Hi, thank you for using XDA Assist. It sounds like your friend had hard bricked his device. I'd see if it can be JTAG'd. You could also try asking your question here, http://forum.xda-developers.com/htc-one-v/help
Good luck and welcome to XDA. And don't forget to register on XDA
Thread closed. No response.
I've been searching for a solution for almost one month but couldn't find one so far. While I've created a thread in Help & Troubleshooting section of the forum but no reply so far. Please Guide.
I rooted my AT&T Infuse 4G using framaroot v. 1.5.3, it was rooted well and worked fine. Then I installed an android app 3c Toolbox Pro and happened to apply preset settings in build control section of the application (build.prop). After then my Phone shows Samsung logo and when sound is played it doesn't show anything and crashes to reboot.
It's charging well, and also booting to Samsung Official Recovery.
Is there any way to recover the device while the USB port is damaged and I can't connect to pc. Please Help to recover....
Hi, thank you for using XDA Assist. To recover your phone you are going to need Odin. See if this will work for you http://forum.xda-developers.com/showthread.php?t=1607788
:'(
jd1639 said:
Hi, thank you for using XDA Assist. To recover your phone you are going to need Odin. See if this will work for you http://forum.xda-developers.com/showthread.php?t=1607788
Click to expand...
Click to collapse
Thanks for your reply. . . but the problem is this my phone doesn't starts when it goes beyond Samsung Logo just sound plays no display at all and after a few seconds it reboots and continues to repeat the same Samsung Logo -> sound without display -> Reboot
Thread closed.
Ok so i have an old samsung galaxy s3 phone that i really want to root but the charging port seems to be half broken as in it charges but when i try to plug it into my computer it just charges unless i wiggle it then it turns off my USB hub but doesn't show up on my pc, i got it to kinda connect but said something like to much power can't connect. anyways I've been trying the one click root method but every one i tried says does not support IDK what to do.
I've done a factory reset to see iiif that helps but didn't.
Info
Model Number - SPH-L710
Android Version - 4.4.2
i think its Kitkat sense a K shows up when i triple click android version
Please help there has to be some one click method out there that works.
Shadowlistic said:
Ok so i have an old samsung galaxy s3 phone that i really want to root but the charging port seems to be half broken as in it charges but when i try to plug it into my computer it just charges unless i wiggle it then it turns off my USB hub but doesn't show up on my pc, i got it to kinda connect but said something like to much power can't connect. anyways I've been trying the one click root method but every one i tried says does not support IDK what to do.
I've done a factory reset to see iiif that helps but didn't.
Info
Model Number - SPH-L710
Android Version - 4.4.2
i think its Kitkat sense a K shows up when i triple click android version
Please help there has to be some one click method out there that works.
Click to expand...
Click to collapse
Hello and thank you for using XDA Assist.
We cannot provide technical support nor can other members reply to your posts here on XDA Assist but fortunately there is an XDA area dedicated to the Sprint Samsung Galaxy S3 at http://forum.xda-developers.com/galaxy-s3-sprint which would be a good starting place. I suggest you post your question with all relevant details in the friendly Q&A forum there at http://forum.xda-developers.com/galaxy-s3-sprint/help where the experts familiar with your device will be best able to guide you.
Good luck!
EDIT: Member has now posted in the suggested area. Thread closed.
Hello guys.
You are my last chance before sending phone back to seller.
So yday i bought Letv1s x500 from giztop.com. Unpacked phone and try to start it(like eveyrone would do) but phone get stuck on EUi logo.
So what i can acess:
Factory mode
Recovery mode with 2 options(will post pictures)
When i connect phone to laptop (win 8.1) it recognize phone as MTP USB device but sorts it under unspecified and i cant acess phone's memory.
Ive tried to get newest drivers from Microsoft but it wont wake up,
so here are pics of what i can do https://drive.google.com/folderview?id=0B0DYXQYlD34JSHhOcC12cEo3WXc&usp=sharing
Please if anyone have any idea iam open to it.
Thanks in advance
bump
Hi,
I can't find a solution on XDA for that, but I did find this thread dedicated to your device that many fellow owners frequent... You could ask for help here:
http://forum.xda-developers.com/android/general/letv-le-1s-released-antutu-test-score-t3234994
Thanks.
I've posted it there aswell but no solution either so i tought maybe someone else had idea what to do.
Thanks anyway.
nesseh said:
Thanks.
I've posted it there aswell but no solution either so i tought maybe someone else had idea what to do.
Thanks anyway.
Click to expand...
Click to collapse
XDA Assist is not a "helpdesk" providing technical assistance. Since your device is relatively uncommon, please be patient and give the experts plenty of time to respond.
Thread closed.