Ok so i have an old samsung galaxy s3 phone that i really want to root but the charging port seems to be half broken as in it charges but when i try to plug it into my computer it just charges unless i wiggle it then it turns off my USB hub but doesn't show up on my pc, i got it to kinda connect but said something like to much power can't connect. anyways I've been trying the one click root method but every one i tried says does not support IDK what to do.
I've done a factory reset to see iiif that helps but didn't.
Info
Model Number - SPH-L710
Android Version - 4.4.2
i think its Kitkat sense a K shows up when i triple click android version
Please help there has to be some one click method out there that works.
Shadowlistic said:
Ok so i have an old samsung galaxy s3 phone that i really want to root but the charging port seems to be half broken as in it charges but when i try to plug it into my computer it just charges unless i wiggle it then it turns off my USB hub but doesn't show up on my pc, i got it to kinda connect but said something like to much power can't connect. anyways I've been trying the one click root method but every one i tried says does not support IDK what to do.
I've done a factory reset to see iiif that helps but didn't.
Info
Model Number - SPH-L710
Android Version - 4.4.2
i think its Kitkat sense a K shows up when i triple click android version
Please help there has to be some one click method out there that works.
Click to expand...
Click to collapse
Hello and thank you for using XDA Assist.
We cannot provide technical support nor can other members reply to your posts here on XDA Assist but fortunately there is an XDA area dedicated to the Sprint Samsung Galaxy S3 at http://forum.xda-developers.com/galaxy-s3-sprint which would be a good starting place. I suggest you post your question with all relevant details in the friendly Q&A forum there at http://forum.xda-developers.com/galaxy-s3-sprint/help where the experts familiar with your device will be best able to guide you.
Good luck!
EDIT: Member has now posted in the suggested area. Thread closed.
Related
Hi, I tried everything at this moment and nothing happen to my s4 mini. It is hard bricked and won’t turn on, won’t charge and I don’t know what to do now. When I plug in usb on pc, it appear other driver isn’t the driver of the model named Qsusb_dload. What I can do now to make my cellphone be alive again? :/
ps: I instaled much time ago cyanogenmod with android 4.4.4 and all work perfectly, it just "dead" with no reason idk why :/
Hi,
Unfortunately that is usually not good, especially showing in the computer as QSUSB_DLOAD.
You can ask fellow device owners for help or suggestions...
http://forum.xda-developers.com/galaxy-s4-mini/help
Good luck!
KJ said:
Hi,
Unfortunately that is usually not good, especially showing in the computer as QSUSB_DLOAD.
You can ask fellow device owners for help or suggestions...
http://forum.xda-developers.com/galaxy-s4-mini/help
Good luck!
Click to expand...
Click to collapse
ok thanks. I'll try. A friend told me for charge the battery on other cellphone or universal recharger battery. I'll try this today... Anyway thank you :good:
Thank you. Thread closed.
Hello, I recently tried to put a custom ROM on my tablet and managed to brick it so it does not turn on, doesn't get recognized by my computer - so basically a brick.
I am now looking for a way out of this mess and would be very happy if someone could help me.
Thanks in advance.
arunbiju969 said:
Is your tab showing samsug logo,plz specify the device status,can it bootinto recovery or fast boot.
Sent from my TW800 using XDA Free mobile app
Click to expand...
Click to collapse
The device will not turn on, will not indicate charging and will not even activate the screen.
holding down the power+vol up/down also does nothing..
Yes, Win 8.1 x64
for my computer, yes (and i would like to keep it that way). i also have a win 8 comp that i dont really care about
for my tablet, no i don't.
It might be effective but it will also be expensive i think, thankyou for your help and i wish you all the best.
Hi
Thanks for writing to us at XDA Assist. Unfortunately it sounds to me like you've properly hard bricked the tablet, there's really no way out of this other than replacing the motherboard usually. I'd suggest you contact your local repair centre and organise to have it inspected.
Good luck!
Thread closed, thanks.
I've been searching for a solution for almost one month but couldn't find one so far. While I've created a thread in Help & Troubleshooting section of the forum but no reply so far. Please Guide.
I rooted my AT&T Infuse 4G using framaroot v. 1.5.3, it was rooted well and worked fine. Then I installed an android app 3c Toolbox Pro and happened to apply preset settings in build control section of the application (build.prop). After then my Phone shows Samsung logo and when sound is played it doesn't show anything and crashes to reboot.
It's charging well, and also booting to Samsung Official Recovery.
Is there any way to recover the device while the USB port is damaged and I can't connect to pc. Please Help to recover....
Hi, thank you for using XDA Assist. To recover your phone you are going to need Odin. See if this will work for you http://forum.xda-developers.com/showthread.php?t=1607788
:'(
jd1639 said:
Hi, thank you for using XDA Assist. To recover your phone you are going to need Odin. See if this will work for you http://forum.xda-developers.com/showthread.php?t=1607788
Click to expand...
Click to collapse
Thanks for your reply. . . but the problem is this my phone doesn't starts when it goes beyond Samsung Logo just sound plays no display at all and after a few seconds it reboots and continues to repeat the same Samsung Logo -> sound without display -> Reboot
Thread closed.
Hello everybody,
So I was trying to flash my phone with a new rom and did not do any good in the "back-up part" of the flashing.
So here I am, I have a Samsung Galaxy S3, GT-I9300.
I have ClockwordMod Recovery V6.0.4.7 running on it.
I can't reach the phone with ADB.
Kingoroot can't find it.
I've tried 4 USB ports, and two cables (one of them worked just fine 10 hours ago).
I've tried several USB drivers, and "yes" I did remember to unplug the phone while reinstalling the driver.
Here I am, 25+ hours in the process... I don't know what the ... to do. Please help me.
I hope you're out there, greetings....
On a note, I have checked if there are other ones who have had alike problems, but I found no-one being in the same stupid situation as me.
frkens said:
Hello everybody,
So I was trying to flash my phone with a new rom and did not do any good in the "back-up part" of the flashing.
So here I am, I have a Samsung Galaxy S3, GT-I9300.
I have ClockwordMod Recovery V6.0.4.7 running on it.
I can't reach the phone with ADB.
Kingoroot can't find it.
I've tried 4 USB ports, and two cables (one of them worked just fine 10 hours ago).
I've tried several USB drivers, and "yes" I did remember to unplug the phone while reinstalling the driver.
Here I am, 25+ hours in the process... I don't know what the ... to do. Please help me.
I hope you're out there, greetings....
On a note, I have checked if there are other ones who have had alike problems, but I found no-one being in the same stupid situation as me.
Click to expand...
Click to collapse
Hello and thank you for using XDA Assist.
Sorry to hear about your trouble. Fortunately there is an XDA area dedicated to the Samsung Galaxy S II IGT-9300 at http://forum.xda-developers.com/galaxy-s3 which would be a good starting place. I suggest you post your question with all relevant details in the friendly Q&A forum there at http://forum.xda-developers.com/galaxy-s3/help where the experts familiar with your device will be best able to guide you.
Good luck!
Hi im new to this forum and new to rooting and that type of thing in general. I bought a rooted galaxy young 2 g130h to use and realized it has a custom rom and is missing key files like Google play wifi and data connection... practically nothing works besides calling. How would I go about reseting to at least factory settings (preferably getting su also ) thanx for your help in advance. Oh and I don't have access to a computer often so if it's possible with the least computer use possible
Terry#2 said:
Hi im new to this forum and new to rooting and that type of thing in general. I bought a rooted galaxy young 2 g130h to use and realized it has a custom rom and is missing key files like Google play wifi and data connection... practically nothing works besides calling. How would I go about reseting to at least factory settings (preferably getting su also ) thanx for your help in advance. Oh and I don't have access to a computer often so if it's possible with the least computer use possible
Click to expand...
Click to collapse
Hi, Thanks for using XDA assist.
It looks like there is no dedicated forum for your device, however
There is a general forum for android here http://forum.xda-developers.com/android/help where you can try to ask to get expert's help.
Good luck