[Completed] [Q] [HELP] Bricked S4 Mini (Gt-I9192) Ask Qsusb_dload driver - XDA Assist

Hi, I tried everything at this moment and nothing happen to my s4 mini. It is hard bricked and won’t turn on, won’t charge and I don’t know what to do now. When I plug in usb on pc, it appear other driver isn’t the driver of the model named Qsusb_dload. What I can do now to make my cellphone be alive again? :/
ps: I instaled much time ago cyanogenmod with android 4.4.4 and all work perfectly, it just "dead" with no reason idk why :/

Hi,
Unfortunately that is usually not good, especially showing in the computer as QSUSB_DLOAD.
You can ask fellow device owners for help or suggestions...
http://forum.xda-developers.com/galaxy-s4-mini/help
Good luck!

KJ said:
Hi,
Unfortunately that is usually not good, especially showing in the computer as QSUSB_DLOAD.
You can ask fellow device owners for help or suggestions...
http://forum.xda-developers.com/galaxy-s4-mini/help
Good luck!
Click to expand...
Click to collapse
ok thanks. I'll try. A friend told me for charge the battery on other cellphone or universal recharger battery. I'll try this today... Anyway thank you :good:

Thank you. Thread closed.

Related

[Completed] [Q] Samsung galaxy tab 2 10.1 Hard-bricked

Hello, I recently tried to put a custom ROM on my tablet and managed to brick it so it does not turn on, doesn't get recognized by my computer - so basically a brick.
I am now looking for a way out of this mess and would be very happy if someone could help me.
Thanks in advance.
arunbiju969 said:
Is your tab showing samsug logo,plz specify the device status,can it bootinto recovery or fast boot.
Sent from my TW800 using XDA Free mobile app
Click to expand...
Click to collapse
The device will not turn on, will not indicate charging and will not even activate the screen.
holding down the power+vol up/down also does nothing..
Yes, Win 8.1 x64
for my computer, yes (and i would like to keep it that way). i also have a win 8 comp that i dont really care about
for my tablet, no i don't.
It might be effective but it will also be expensive i think, thankyou for your help and i wish you all the best.
Hi
Thanks for writing to us at XDA Assist. Unfortunately it sounds to me like you've properly hard bricked the tablet, there's really no way out of this other than replacing the motherboard usually. I'd suggest you contact your local repair centre and organise to have it inspected.
Good luck!
Thread closed, thanks.

[Completed] Help, friend's HTC One V doesn't turn on after attempted ROM flash

So, hello everyone. Long time lurker here, only signed up today. Shame on me.
Anyway... my good friend tried flashing a ROM on his device ( HTC one V) and everything went terribly wrong. I do not know what he did or what the name of the ROM is, and I have no way to find out.
If I try to turn it on it does absolutely nothing but the battery's fully charged (Battery led works). Even though it doesn't do anything, it is recognized as an external hard drive (two, actually) on my pc and the device manager actually sees the device as " HTC phone". Other than that, I couldn't do anything else.
I'm very new to this, so if anybody could lend me a hand I'd be happy. Thank you in advance.
If I forgot vital details ask away, i'm here.
Hi, thank you for using XDA Assist. It sounds like your friend had hard bricked his device. I'd see if it can be JTAG'd. You could also try asking your question here, http://forum.xda-developers.com/htc-one-v/help
Good luck and welcome to XDA. And don't forget to register on XDA
Thread closed. No response.

[Completed] Little help on my Samsung Galaxy S3 GT-I9300, please???

Hello everybody,
So I was trying to flash my phone with a new rom and did not do any good in the "back-up part" of the flashing.
So here I am, I have a Samsung Galaxy S3, GT-I9300.
I have ClockwordMod Recovery V6.0.4.7 running on it.
I can't reach the phone with ADB.
Kingoroot can't find it.
I've tried 4 USB ports, and two cables (one of them worked just fine 10 hours ago).
I've tried several USB drivers, and "yes" I did remember to unplug the phone while reinstalling the driver.
Here I am, 25+ hours in the process... I don't know what the ... to do. Please help me.
I hope you're out there, greetings....
On a note, I have checked if there are other ones who have had alike problems, but I found no-one being in the same stupid situation as me.
frkens said:
Hello everybody,
So I was trying to flash my phone with a new rom and did not do any good in the "back-up part" of the flashing.
So here I am, I have a Samsung Galaxy S3, GT-I9300.
I have ClockwordMod Recovery V6.0.4.7 running on it.
I can't reach the phone with ADB.
Kingoroot can't find it.
I've tried 4 USB ports, and two cables (one of them worked just fine 10 hours ago).
I've tried several USB drivers, and "yes" I did remember to unplug the phone while reinstalling the driver.
Here I am, 25+ hours in the process... I don't know what the ... to do. Please help me.
I hope you're out there, greetings....
On a note, I have checked if there are other ones who have had alike problems, but I found no-one being in the same stupid situation as me.
Click to expand...
Click to collapse
Hello and thank you for using XDA Assist.
Sorry to hear about your trouble. Fortunately there is an XDA area dedicated to the Samsung Galaxy S II IGT-9300 at http://forum.xda-developers.com/galaxy-s3 which would be a good starting place. I suggest you post your question with all relevant details in the friendly Q&A forum there at http://forum.xda-developers.com/galaxy-s3/help where the experts familiar with your device will be best able to guide you.
Good luck!

[Completed] Touchscreen problem

Hi, I bought an old Vodaphone 845 for R350 and it was working fine untill now the touchscreen seems to have stopped being touchy. In otherwords, i cant use it. Its running Android 2.2 and i tried with an otg cable and mouse but it didnt seem to work. Is OTG supported in this phone. Anywho a touchscreen repair guide would be nice, but assistance in getting otg to work or somethig like that would be nice.
XDA Visitor said:
Hi, I bought an old Vodaphone 845 for R350 and it was working fine untill now the touchscreen seems to have stopped being touchy. In otherwords, i cant use it. Its running Android 2.2 and i tried with an otg cable and mouse but it didnt seem to work. Is OTG supported in this phone. Anywho a touchscreen repair guide would be nice, but assistance in getting otg to work or somethig like that would be nice.
Click to expand...
Click to collapse
Welcome to XDA Developers.
First, please register as a user, here > http://forum.xda-developers.com/register.php
I'm sorry, but there is not a specific forum for your device yet.
After you have registered, if you go to the following forum and post your question, hopefully one of our experts can help you > http://forum.xda-developers.com/showthread.php?t=2257421
Good luck.

[Completed] HELP with rooting samsung galaxy s3 with OUT PC

Ok so i have an old samsung galaxy s3 phone that i really want to root but the charging port seems to be half broken as in it charges but when i try to plug it into my computer it just charges unless i wiggle it then it turns off my USB hub but doesn't show up on my pc, i got it to kinda connect but said something like to much power can't connect. anyways I've been trying the one click root method but every one i tried says does not support IDK what to do.
I've done a factory reset to see iiif that helps but didn't.
Info
Model Number - SPH-L710
Android Version - 4.4.2
i think its Kitkat sense a K shows up when i triple click android version
Please help there has to be some one click method out there that works.
Shadowlistic said:
Ok so i have an old samsung galaxy s3 phone that i really want to root but the charging port seems to be half broken as in it charges but when i try to plug it into my computer it just charges unless i wiggle it then it turns off my USB hub but doesn't show up on my pc, i got it to kinda connect but said something like to much power can't connect. anyways I've been trying the one click root method but every one i tried says does not support IDK what to do.
I've done a factory reset to see iiif that helps but didn't.
Info
Model Number - SPH-L710
Android Version - 4.4.2
i think its Kitkat sense a K shows up when i triple click android version
Please help there has to be some one click method out there that works.
Click to expand...
Click to collapse
Hello and thank you for using XDA Assist.
We cannot provide technical support nor can other members reply to your posts here on XDA Assist but fortunately there is an XDA area dedicated to the Sprint Samsung Galaxy S3 at http://forum.xda-developers.com/galaxy-s3-sprint which would be a good starting place. I suggest you post your question with all relevant details in the friendly Q&A forum there at http://forum.xda-developers.com/galaxy-s3-sprint/help where the experts familiar with your device will be best able to guide you.
Good luck!
EDIT: Member has now posted in the suggested area. Thread closed.

Categories

Resources