Database Info

[Completed] Soft bricked Samsung Galaxy S4 GT-I9505

Recently I was trying to flash a firmware to update from Android Jellybean 4.3 to 5.0.1 lollipop. Ended up soft-bricking my phone.
Here's what I have already tried:
1. Do not tell me to change the USB cable/port, as it worked completely fine to root my phone the day before it got bricked.
2. I downloaded what (I think) is the stock firmware of my phone, and tried to flash it with Odin (3.07, 3.09 and 3.10.6) and a PIT file. (Gave an error without the PIT)
Here's the logs of what happens:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUEMK9_I9505OJVEMK4_I9505XXUEMK9_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl2.mbn
<ID:0/004> sbl3.mbn
<ID:0/004> rpm.mbn
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
It fails, and nothing happens. Sometimes on the phone's screen, it also shows "SV REV. CHECK FAIL : fused : 4, Binary : 3" in one of the lines. Not sure what it means.
3. I tried flashing the PIT file without a PDA, and it succeeds, but then it gets stuck in the start-screen boot loop.
4. I cannot go into recovery mode, I've tried it but it didn't work. (Home button + Power + Vol Up.) I can only go into download mode..
Please help me.

bogdan109 said:
Connect your phone to pc and go to device manager. How does it appear in to device manager?
Sent from my SM-G901F using Tapatalk 2
Click to expand...
Click to collapse
Well.. ever since it was bricked, I can't seem to find it in the device manager at all, though Odin does seem to recognize my device.
Also, I reinstalled Samsung Kies and the drivers several times, but it always gets stuck on "connecting device" each time on Kies.

bogdan109 said:
Connect your phone to pc and go to device manager. How does it appear in to device manager?
Sent from my SM-G901F using Tapatalk 2
Click to expand...
Click to collapse
After trying to update Kies drivers once more, now it shows under Modems as "Samsung Mobile USB Modem #5"

Cleon7 said:
After trying to update Kies drivers once more, now it shows under Modems as "Samsung Mobile USB Modem #5"
Click to expand...
Click to collapse
After updating drivers with an ADB-based toolkit, it doesn't show in the device manager again.

Someone please help.. I'm running out of options..

Cleon7 said:
Recently I was trying to flash a firmware to update from Android Jellybean 4.3 to 5.0.1 lollipop. Ended up soft-bricking my phone.
Here's what I have already tried:
1. Do not tell me to change the USB cable/port, as it worked completely fine to root my phone the day before it got bricked.
2. I downloaded what (I think) is the stock firmware of my phone, and tried to flash it with Odin (3.07, 3.09 and 3.10.6) and a PIT file. (Gave an error without the PIT)
Here's the logs of what happens:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUEMK9_I9505OJVEMK4_I9505XXUEMK9_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl2.mbn
<ID:0/004> sbl3.mbn
<ID:0/004> rpm.mbn
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
It fails, and nothing happens. Sometimes on the phone's screen, it also shows "SV REV. CHECK FAIL : fused : 4, Binary : 3" in one of the lines. Not sure what it means.
3. I tried flashing the PIT file without a PDA, and it succeeds, but then it gets stuck in the start-screen boot loop.
4. I cannot go into recovery mode, I've tried it but it didn't work. (Home button + Power + Vol Up.) I can only go into download mode..
Please help me.
Click to expand...
Click to collapse
Hi and thank you for using XDA Assist
Here is everything you need to know.
For futher questions head over here > Galaxy S 4 Q&A, Help & Troubleshooting
Good luck!

nilac said:
Hi and thank you for using XDA Assist
Here is everything you need to know.
For futher questions head over here > Galaxy S 4 Q&A, Help & Troubleshooting
Good luck!
Click to expand...
Click to collapse
I've already tried the procedure in that thread, and after failing several times, I decided to start a thread here..
Anyway thanks, I'll open a new thread in the board you provided.

[Q][HELP][GT-P3100]Flashing Firmware PASS but still firmware upgrade encountered

helo..
my phone gt-p3100
cannot enter recovery (pwr+vol+) and download mode (pwr+vol-), but just stuck in "firmware upgrade encountered an issue, please recovery mode in kies & try again",but the device still connec and sync to odin.
when flashing use odin 3.07 with stock rom from samsung-updates.com / or cwm/twrp/chillpilz recovery for my device the flasher complete and pass..but after auto rebooting just got black screen,and if press power got back to firmware upgrade encontered an issue.
here the odin log :
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P3100XXCME2_P3100OLBCME2_P3100DXDLL1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> system.img
<ID:0/004> NAND Write Start!!
<ID:0/004> boot.img
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> recovery.img
<ID:0/004> MLO
<ID:0/004> param.lfs
<ID:0/004> Sbl.bin
<ID:0/004> modem.bin
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/004> Added!!
tired use another odin version just get flashing FAIL and other gt-p3100 still stuck firmware issue
anyone can give me another solusion ?
i aready read all thread in forum xda about flashing/brick/recovery...but still no luck

Flash the PIT file
Sent from my Galaxy Tab 2 3G using Tapatalk

joblee said:
Flash the PIT file
Sent from my Galaxy Tab 2 3G using Tapatalk
Click to expand...
Click to collapse
Have u get a pit file for 16gb tab2
Sent from my GT-N7000 using xda Forums PRO

Uninstall KIES.

shahkbrmn said:
Have u get a pit file for 16gb tab2
Sent from my GT-N7000 using xda Forums PRO
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2552155
For the pit file
Sent from my Nexus using Tapatalk

[HELP] Galaxy S7 rebooting straight into Odin Downloading Screen

Hello guys.
My Galaxy S7 had a problem once where it was stuck at the Samsung Logo when booting. I took it to a Samsung Rep and they repaired it for me because it was on the warranty period. 3 months after this repair the phone had the same issue, but as it was out of warranty already i flashed a stock rom through odin and it worked. 2 weeks later i was using the phone playing some games while listening to music and then suddenly it restarted and now it boots straight into the "Downloading... please don't turn off" Odin Screen. When i restart the phone it shows the Samsung Galaxy S7 screen real fast and then goes to the "Downloading..." screen, without even showing the "Warning A custom OS...." screen. And when on this screen it does not show the usual Odin screen info on the top left corner. If i try to restart it with the Volume Down, Power and Home sometimes it shows the usual screens for Odin (First the Warning Screen and then the Downloading with the info on the top left corner).
I tried to flash a new firmware but it does not work. I searched a lot on the internet but couldn't find anyone with the same issue, only people who are stuck on odin mode but then when they press the volume down, home and power button the phone boots normally.
This is the Log when i try to flash with HOME_CSC
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> skip file list for home binary
<ID:0/004> param.bin
<ID:0/004> Home Binary Download
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> cm.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
And when i try with CSC i get the "No PIT Partition" error. The firmware that was flashed before this last problem is the same i'm trying to flash right now : G930FXXS1BPJC_G930FZTO1BPIF_ZTO (Brazil Unlocked) from 10/11/16. Downloaded on SamMobile
Thanks

icelest said:
Hello guys.
My Galaxy S7 had a problem once where it was stuck at the Samsung Logo when booting. I took it to a Samsung Rep and they repaired it for me because it was on the warranty period. 3 months after this repair the phone had the same issue, but as it was out of warranty already i flashed a stock rom through odin and it worked. 2 weeks later i was using the phone playing some games while listening to music and then suddenly it restarted and now it boots straight into the "Downloading... please don't turn off" Odin Screen. When i restart the phone it shows the Samsung Galaxy S7 screen real fast and then goes to the "Downloading..." screen, without even showing the "Warning A custom OS...." screen. And when on this screen it does not show the usual Odin screen info on the top left corner. If i try to restart it with the Volume Down, Power and Home sometimes it shows the usual screens for Odin (First the Warning Screen and then the Downloading with the info on the top left corner).
I tried to flash a new firmware but it does not work. I searched a lot on the internet but couldn't find anyone with the same issue, only people who are stuck on odin mode but then when they press the volume down, home and power button the phone boots normally.
This is the Log when i try to flash with HOME_CSC
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> skip file list for home binary
<ID:0/004> param.bin
<ID:0/004> Home Binary Download
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> cm.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
And when i try with CSC i get the "No PIT Partition" error. The firmware that was flashed before this last problem is the same i'm trying to flash right now : G930FXXS1BPJC_G930FZTO1BPIF_ZTO (Brazil Unlocked) from 10/11/16. Downloaded on SamMobile
Thanks
Click to expand...
Click to collapse
Hi mate
Why is not in warranty still...should be a year
Are you using the latest Odin?
Are you also flashing AP BL & CP?
Go into recovery do a factory reset and try again.......
Try a different stock firmware

MAX 404 said:
Hi mate
Why is not in warranty still...should be a year
Are you using the latest Odin?
Are you also flashing AP BL & CP?
Go into recovery do a factory reset and try again.......
Try a different stock firmware
Click to expand...
Click to collapse
Samsung is denying the warranty because my screen has 2 cracks and they are saying that this problem was caused because of my "bad use" of the smartphone.
Yes. Using Odin 3.12.3.
I'm flashing AP, BL, CP and CSC.
Can't go into recovery. The phone goes straight to the odin screen. Can't do anything other than odin.
Already tried 3 firmwares from my csc (ZTO) and 2 from the Official Stock Rom thread here at XDA.

icelest said:
Samsung is denying the warranty because my screen has 2 cracks and they are saying that this problem was caused because of my "bad use" of the smartphone.
Yes. Using Odin 3.12.3.
I'm flashing AP, BL, CP and CSC.
Can't go into recovery. The phone goes straight to the odin screen. Can't do anything other than odin.
Already tried 3 firmwares from my csc (ZTO) and 2 from the Official Stock Rom thread here at XDA.
Click to expand...
Click to collapse
Try leaving BL out from the flash, only flash the other 3 parts

*Detection* said:
Try leaving BL out from the flash, only flash the other 3 parts
Click to expand...
Click to collapse
This is the log when using the other 3 without the BL
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> skip file list for home binary
<ID:0/005> Home Binary Download
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005>
<ID:0/005> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)

Try to flash Twrp then make format data and flash custom Rom..

Muhammad Rihawi said:
Try to flash Twrp then make format data and flash custom Rom..
Click to expand...
Click to collapse
Odin Fails to flash TWRP. This is the log:
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005>
<ID:0/005> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)

Don't try flashing anything custom or you'll trip the KNOX warranty uFuse
Phone is still under warranty for 12 months, take it back, the repair failed they should fix it again

icelest said:
Samsung is denying the warranty because my screen has 2 cracks and they are saying that this problem was caused because of my "bad use" of the smartphone.
Yes. Using Odin 3.12.3.
I'm flashing AP, BL, CP and CSC.
Can't go into recovery. The phone goes straight to the odin screen. Can't do anything other than odin.
Already tried 3 firmwares from my csc (ZTO) and 2 from the Official Stock Rom thread here at XDA.
Click to expand...
Click to collapse
icelest said:
This is the log when using the other 3 without the BL
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> skip file list for home binary
<ID:0/005> Home Binary Download
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005>
<ID:0/005> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Hi mate
In your first post you showed that odins fails on this step
cm.bin = Cryptography Manager , the function of this is to avoid downgrades
Do you remember what was the firmware you had? if not try to flash the very latest firmware available
Also i found a very similar case in a a S6 thread , the problem seems like the recovery was missing
http://forum.xda-developers.com/galaxy-s6/help/solved-stuck-download-mode-failed-odin-t3104736
check it out just in case the above solution fails
How to Extract Stock Recovery from Samsung Firmware!

MAX 404 said:
Hi mate
In your first post you showed that odins fails on this step
cm.bin = Cryptography Manager , the function of this is to avoid downgrades
Do you remember what was the firmware you had? if not try to flash the very latest firmware available
Also i found a very similar case in a a S6 thread , the problem seems like the recovery was missing
http://forum.xda-developers.com/galaxy-s6/help/solved-stuck-download-mode-failed-odin-t3104736
check it out just in case the above solution fails
How to Extract Stock Recovery from Samsung Firmware!
Click to expand...
Click to collapse
Thanks for the help. I'll try downloading the latest firmware and flashing it. After that i'll try the solution on the S6 thread. Thank you very much

MAX 404 said:
Hi mate
In your first post you showed that odins fails on this step
cm.bin = Cryptography Manager , the function of this is to avoid downgrades
Do you remember what was the firmware you had? if not try to flash the very latest firmware available
Also i found a very similar case in a a S6 thread , the problem seems like the recovery was missing
http://forum.xda-developers.com/galaxy-s6/help/solved-stuck-download-mode-failed-odin-t3104736
check it out just in case the above solution fails
How to Extract Stock Recovery from Samsung Firmware!
Click to expand...
Click to collapse
When trying the recovery.img method i got this log on Odin
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005>
<ID:0/005> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
Currently downloading the latest firmware for tests

MAX 404 said:
Hi mate
In your first post you showed that odins fails on this step
cm.bin = Cryptography Manager , the function of this is to avoid downgrades
Do you remember what was the firmware you had? if not try to flash the very latest firmware available
Also i found a very similar case in a a S6 thread , the problem seems like the recovery was missing
http://forum.xda-developers.com/galaxy-s6/help/solved-stuck-download-mode-failed-odin-t3104736
check it out just in case the above solution fails
How to Extract Stock Recovery from Samsung Firmware!
Click to expand...
Click to collapse
I get this Odin Log when flashing the recovery method as displayed on the S6 thread
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005>
<ID:0/005> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)

better try the different firmware but use some chrome or browser downloader to download the firmware not internet download manager.
any downloader which uses the single downloading node not multiple nodes like idm
it happened with me 2 i figured it out using this method.thanx

icelest said:
I get this Odin Log when flashing the recovery method as displayed on the S6 thread
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005>
<ID:0/005> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
What about flashing the latest firmware, you tried?

MAX 404 said:
What about flashing the latest firmware, you tried?
Click to expand...
Click to collapse
With the last firmware i get the same PIT error
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> skip file list for home binary
<ID:0/005> param.bin
<ID:0/005> Home Binary Download
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005>
<ID:0/005> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)

icelest said:
With the last firmware i get the same PIT error
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> skip file list for home binary
<ID:0/005> param.bin
<ID:0/005> Home Binary Download
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005>
<ID:0/005> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
hi
are you using CSC or home_csc?
use CSC file it contains the pit file

MAX 404 said:
hi
are you using CSC or home_csc?
use CSC file it contains the pit file
Click to expand...
Click to collapse
With CSC i get this error
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

What you have is a hardware fault. Aka brick.

icelest said:
With CSC i get this error
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Hi mate
Did you re installed the Samsung drivers , try a different USB cable....better yet try all this in a different PC, just to make sure all this problems are not PC related

MAX 404 said:
Hi mate
Did you re installed the Samsung drivers , try a different USB cable....better yet try all this in a different PC, just to make sure all this problems are not PC related
Click to expand...
Click to collapse
Hi.
Yeah, tried it on 3 different PCs. Always the same errors :/ I'm guessing it's some hardware issue. Now i'll have to fight Samsung so they fix the phone on warranty

Stuck at boot and unable to change anything!

I have an old 8013 Note 10.1 that I let my kids use, it's had CM on it forever and no issues until recently. Now it boots up to the CM bootscreen but doesn't go any further. I've booted to TWRP and tried to format and install a new ROM but it doesn't seem to even format. When I go to load a new ROM it always shows that the internal storage is the same free space (something like 513Mb). I've tried flashing PhilzTouch, TWRP, CWM, and when I reboot to recover it's still the same version of TWRP I started with. Tried flashing a stock ROM, still boots to the CM Logo. Loaded ODIN on my computer and tried flashing a stock image using ODIN and it shows it's successful, but nothing changes on the tablet. I even tried the instructions listed in this post, which should reformat everything and still - same issue.
I've attached a few screenshots of the kinds of errors and messages I get in TWRP when I try to format, do an advanced wipe of everything and still a new ROM. Any suggestions would be great! I'm ready to give up on this thing, but I still have a sliver of hope.

Re install your oriGinal frimware
Sent from my SM-J700F using Tapatalk

saismarty said:
Re install your oriGinal frimware
Sent from my SM-J700F using Tapatalk
Click to expand...
Click to collapse
As I think I mentioned, I've tried. Just to be clear I've added some screenshots and output from ODIN.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_N8013UEUCOI1_N8013XARCOI1_813049_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003> cache.img
<ID:0/003> hidden.img
<ID:0/003> sboot.bin
<ID:0/003> param.bin
<ID:0/003> tz.img
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Looks like everything is flashing just fine... until I reboot the tablet and get the CM Boot logo again and the tablet just gets stuck there...

What happened next
Sent from my SM-J700F using Tapatalk

saismarty said:
What happened next
Sent from my SM-J700F using Tapatalk
Click to expand...
Click to collapse
Cyanogenmod boot animation and just stuck there... just like ODIN never happened.

Try doing Odin but check Nand erase all, if you know what that does it should wipe what's holding your tablet back and then flash stock firmware, just hope it works, I don't know anything else really

Help Flashing back to stock.

I'm trying to get back to stock and odin keeps throwing an error.
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1205)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> sboot.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
After the error, my phone reads "SW REV. CHECK FAIL. DEVICE: 3, BINARY: 2" and after a good search, someone said it was because I was installing a custom rom with odin, but I'm flashing over the stock one.

Flash latest rom

amarshah said:
Flash latest rom
Click to expand...
Click to collapse
I'm trying to do that, that's the error I get.

Charmeleomander said:
I'm trying to do that, that's the error I get.
Click to expand...
Click to collapse
Ohh ...than flash 4 firmware file together here it is
https://forum.xda-developers.com/galaxy-j7/development/j700h-marshmallow-update-method-rom-t3399433

My imei is null after flashing Rom
And now my SIM is not detected in this mobile
I tried flashing stock Rom via odin nothing works throws errors as 'sw rev secunity check fail device 3 binary 2' and ' security check fail bootloader'
though I flash latest Rom!
If I flash custom Rom still SIM is not recognised
Help me how to fix?