Database Info

GS5 bricked? Reactivation lock

Howdy everyone! Im a new member, but Ive been using the site since the HTC G1 from T-Mobile
I have a G900P Galaxy S5 for Boost Mobile. (It was on 5.0 if that changes anything) I bought the phone, played with it for a few days before I would decide to activate it. I hit the reactivation lock thinking it would be safe if anything were to happen to it, then when I activated it and it updated the Profile, PRL and whatever else for activation, it got pissed off and said
"custom binary blocked by reactivation lock"
Ive tried using Odin to bring me back, but I cannot load the NKD lollipop bootloader, phone says:
SW rev check fail : [tz] Fused 3 > Binary 1
Odin says:
<ID:0/005> Odin engine v(ID:3.1100)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> NON-HLOS.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1
I tried adding the stock Rom (G900P_NKD_FullRestore) also using Odin, but that also makes it upset
Odin Says:
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1100)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Now the phone says
Firmware upgrade encountered an issue. Please Select recovery mode in Kies and try again
Do I start to cry over my new paperweight here?
I hope Im not totally dead in the water here. What should I do? and what is possible at this point?

Kies will restore it to latest firmware or you can odin the latest. The phone has newer firmware on it than you where trying to flash it looks like. Cant downgrade to that one.

Ok, if I download a newer firmware, will I need the bootloader installed? Or do I need a newer bootloader too?

If you download the stock firmware it will have the bootloader and all in it. Thats one of the reasons as to why the file is so big. You can download the firmware from your cell provider or you can download one from here http://www.sammobile.com/firmwares/ also, you can find rooted and stock roms here at XDA. Just make sure you download the rom that is for your phone!

got it, Ok cool! Im using Rwilco12's site. Im going to try this again, wish me luck!
IT WORKED!
YAY! Thanks guys!

Same issue
keepinitril said:
got it, Ok cool! Im using Rwilco12's site. Im going to try this again, wish me luck!
IT WORKED!
YAY! Thanks guys!
Click to expand...
Click to collapse
Could you possibly list the steps you used to recover your phone ? i'm having the exact same issue and am trying to restore my phone. I just cannot seem to locate a working download. Also i want to make sure I do everything correctly.

Download Odin
Download your rom from RWilco12
http://rwilco12.com/downloads.php?dir=Files/Devices/
Put your phone into download mode
use Odin (give it time)
done

Thank you! Got it working again. You just saved me getting a whole new phone.

Reactivation Lock
autotech40 said:
Kies will restore it to latest firmware or you can odin the latest. The phone has newer firmware on it than you where trying to flash it looks like. Cant downgrade to that one.
Click to expand...
Click to collapse
I have same issue & and i have running lollipop (bok4) . please give me solution for get rid of reactivation lock. I have tried many roms to flash but field by this error also Rwilco12's.
Odin says:
<ID:0/005> Odin engine v(ID:3.1100)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> NON-HLOS.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1

[HELP] Galaxy S7 rebooting straight into Odin Downloading Screen

Hello guys.
My Galaxy S7 had a problem once where it was stuck at the Samsung Logo when booting. I took it to a Samsung Rep and they repaired it for me because it was on the warranty period. 3 months after this repair the phone had the same issue, but as it was out of warranty already i flashed a stock rom through odin and it worked. 2 weeks later i was using the phone playing some games while listening to music and then suddenly it restarted and now it boots straight into the "Downloading... please don't turn off" Odin Screen. When i restart the phone it shows the Samsung Galaxy S7 screen real fast and then goes to the "Downloading..." screen, without even showing the "Warning A custom OS...." screen. And when on this screen it does not show the usual Odin screen info on the top left corner. If i try to restart it with the Volume Down, Power and Home sometimes it shows the usual screens for Odin (First the Warning Screen and then the Downloading with the info on the top left corner).
I tried to flash a new firmware but it does not work. I searched a lot on the internet but couldn't find anyone with the same issue, only people who are stuck on odin mode but then when they press the volume down, home and power button the phone boots normally.
This is the Log when i try to flash with HOME_CSC
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> skip file list for home binary
<ID:0/004> param.bin
<ID:0/004> Home Binary Download
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> cm.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
And when i try with CSC i get the "No PIT Partition" error. The firmware that was flashed before this last problem is the same i'm trying to flash right now : G930FXXS1BPJC_G930FZTO1BPIF_ZTO (Brazil Unlocked) from 10/11/16. Downloaded on SamMobile
Thanks

icelest said:
Hello guys.
My Galaxy S7 had a problem once where it was stuck at the Samsung Logo when booting. I took it to a Samsung Rep and they repaired it for me because it was on the warranty period. 3 months after this repair the phone had the same issue, but as it was out of warranty already i flashed a stock rom through odin and it worked. 2 weeks later i was using the phone playing some games while listening to music and then suddenly it restarted and now it boots straight into the "Downloading... please don't turn off" Odin Screen. When i restart the phone it shows the Samsung Galaxy S7 screen real fast and then goes to the "Downloading..." screen, without even showing the "Warning A custom OS...." screen. And when on this screen it does not show the usual Odin screen info on the top left corner. If i try to restart it with the Volume Down, Power and Home sometimes it shows the usual screens for Odin (First the Warning Screen and then the Downloading with the info on the top left corner).
I tried to flash a new firmware but it does not work. I searched a lot on the internet but couldn't find anyone with the same issue, only people who are stuck on odin mode but then when they press the volume down, home and power button the phone boots normally.
This is the Log when i try to flash with HOME_CSC
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> skip file list for home binary
<ID:0/004> param.bin
<ID:0/004> Home Binary Download
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> cm.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
And when i try with CSC i get the "No PIT Partition" error. The firmware that was flashed before this last problem is the same i'm trying to flash right now : G930FXXS1BPJC_G930FZTO1BPIF_ZTO (Brazil Unlocked) from 10/11/16. Downloaded on SamMobile
Thanks
Click to expand...
Click to collapse
Hi mate
Why is not in warranty still...should be a year
Are you using the latest Odin?
Are you also flashing AP BL & CP?
Go into recovery do a factory reset and try again.......
Try a different stock firmware

MAX 404 said:
Hi mate
Why is not in warranty still...should be a year
Are you using the latest Odin?
Are you also flashing AP BL & CP?
Go into recovery do a factory reset and try again.......
Try a different stock firmware
Click to expand...
Click to collapse
Samsung is denying the warranty because my screen has 2 cracks and they are saying that this problem was caused because of my "bad use" of the smartphone.
Yes. Using Odin 3.12.3.
I'm flashing AP, BL, CP and CSC.
Can't go into recovery. The phone goes straight to the odin screen. Can't do anything other than odin.
Already tried 3 firmwares from my csc (ZTO) and 2 from the Official Stock Rom thread here at XDA.

icelest said:
Samsung is denying the warranty because my screen has 2 cracks and they are saying that this problem was caused because of my "bad use" of the smartphone.
Yes. Using Odin 3.12.3.
I'm flashing AP, BL, CP and CSC.
Can't go into recovery. The phone goes straight to the odin screen. Can't do anything other than odin.
Already tried 3 firmwares from my csc (ZTO) and 2 from the Official Stock Rom thread here at XDA.
Click to expand...
Click to collapse
Try leaving BL out from the flash, only flash the other 3 parts

*Detection* said:
Try leaving BL out from the flash, only flash the other 3 parts
Click to expand...
Click to collapse
This is the log when using the other 3 without the BL
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> skip file list for home binary
<ID:0/005> Home Binary Download
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005>
<ID:0/005> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)

Try to flash Twrp then make format data and flash custom Rom..

Muhammad Rihawi said:
Try to flash Twrp then make format data and flash custom Rom..
Click to expand...
Click to collapse
Odin Fails to flash TWRP. This is the log:
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005>
<ID:0/005> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)

Don't try flashing anything custom or you'll trip the KNOX warranty uFuse
Phone is still under warranty for 12 months, take it back, the repair failed they should fix it again

icelest said:
Samsung is denying the warranty because my screen has 2 cracks and they are saying that this problem was caused because of my "bad use" of the smartphone.
Yes. Using Odin 3.12.3.
I'm flashing AP, BL, CP and CSC.
Can't go into recovery. The phone goes straight to the odin screen. Can't do anything other than odin.
Already tried 3 firmwares from my csc (ZTO) and 2 from the Official Stock Rom thread here at XDA.
Click to expand...
Click to collapse
icelest said:
This is the log when using the other 3 without the BL
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> skip file list for home binary
<ID:0/005> Home Binary Download
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005>
<ID:0/005> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Hi mate
In your first post you showed that odins fails on this step
cm.bin = Cryptography Manager , the function of this is to avoid downgrades
Do you remember what was the firmware you had? if not try to flash the very latest firmware available
Also i found a very similar case in a a S6 thread , the problem seems like the recovery was missing
http://forum.xda-developers.com/galaxy-s6/help/solved-stuck-download-mode-failed-odin-t3104736
check it out just in case the above solution fails
How to Extract Stock Recovery from Samsung Firmware!

MAX 404 said:
Hi mate
In your first post you showed that odins fails on this step
cm.bin = Cryptography Manager , the function of this is to avoid downgrades
Do you remember what was the firmware you had? if not try to flash the very latest firmware available
Also i found a very similar case in a a S6 thread , the problem seems like the recovery was missing
http://forum.xda-developers.com/galaxy-s6/help/solved-stuck-download-mode-failed-odin-t3104736
check it out just in case the above solution fails
How to Extract Stock Recovery from Samsung Firmware!
Click to expand...
Click to collapse
Thanks for the help. I'll try downloading the latest firmware and flashing it. After that i'll try the solution on the S6 thread. Thank you very much

MAX 404 said:
Hi mate
In your first post you showed that odins fails on this step
cm.bin = Cryptography Manager , the function of this is to avoid downgrades
Do you remember what was the firmware you had? if not try to flash the very latest firmware available
Also i found a very similar case in a a S6 thread , the problem seems like the recovery was missing
http://forum.xda-developers.com/galaxy-s6/help/solved-stuck-download-mode-failed-odin-t3104736
check it out just in case the above solution fails
How to Extract Stock Recovery from Samsung Firmware!
Click to expand...
Click to collapse
When trying the recovery.img method i got this log on Odin
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005>
<ID:0/005> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
Currently downloading the latest firmware for tests

MAX 404 said:
Hi mate
In your first post you showed that odins fails on this step
cm.bin = Cryptography Manager , the function of this is to avoid downgrades
Do you remember what was the firmware you had? if not try to flash the very latest firmware available
Also i found a very similar case in a a S6 thread , the problem seems like the recovery was missing
http://forum.xda-developers.com/galaxy-s6/help/solved-stuck-download-mode-failed-odin-t3104736
check it out just in case the above solution fails
How to Extract Stock Recovery from Samsung Firmware!
Click to expand...
Click to collapse
I get this Odin Log when flashing the recovery method as displayed on the S6 thread
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005>
<ID:0/005> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)

better try the different firmware but use some chrome or browser downloader to download the firmware not internet download manager.
any downloader which uses the single downloading node not multiple nodes like idm
it happened with me 2 i figured it out using this method.thanx

icelest said:
I get this Odin Log when flashing the recovery method as displayed on the S6 thread
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005>
<ID:0/005> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
What about flashing the latest firmware, you tried?

MAX 404 said:
What about flashing the latest firmware, you tried?
Click to expand...
Click to collapse
With the last firmware i get the same PIT error
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> skip file list for home binary
<ID:0/005> param.bin
<ID:0/005> Home Binary Download
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005>
<ID:0/005> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)

icelest said:
With the last firmware i get the same PIT error
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> skip file list for home binary
<ID:0/005> param.bin
<ID:0/005> Home Binary Download
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005>
<ID:0/005> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
hi
are you using CSC or home_csc?
use CSC file it contains the pit file

MAX 404 said:
hi
are you using CSC or home_csc?
use CSC file it contains the pit file
Click to expand...
Click to collapse
With CSC i get this error
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

What you have is a hardware fault. Aka brick.

icelest said:
With CSC i get this error
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Hi mate
Did you re installed the Samsung drivers , try a different USB cable....better yet try all this in a different PC, just to make sure all this problems are not PC related

MAX 404 said:
Hi mate
Did you re installed the Samsung drivers , try a different USB cable....better yet try all this in a different PC, just to make sure all this problems are not PC related
Click to expand...
Click to collapse
Hi.
Yeah, tried it on 3 different PCs. Always the same errors :/ I'm guessing it's some hardware issue. Now i'll have to fight Samsung so they fix the phone on warranty

J7 2016 SM-J710FN Restore to full Stock. Odin cm.bin error

Hey Guys,
I recently rooted and flashed supernova ROM
Now i want to return to official full stock rom and recovery.
I Downloaded official samsung firmware from Sammobile and tried to flash using Odin.
I am getting an error after cm.bin in Odin.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1101)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> cm.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Please help me switch back to complete stock
If anyone have PIT file for SM0J710FN, I can use that maybe
Please help
Thanks in advance

Most Probably you're trying to downgrade.
cm.bin error occur usually when someone tries to downgrade the current Android version.
For example - if you have MM and trying to flash a Lollipop rom, you can't. because when you upgrade the android version, the corresponding bootloader of your phone get updated and then it can't flash the lower android version rom or get back to older bootloader version.
solution- download latest stock rom for your phone and flash it via odin.

download and flash it with latest firmware but error is not gone ...phone is samsung j710fn

Deleted my OS

Hi
When unrooting my phone I accidentally deleted the OS from my Samsung S6.
My model is SM-G920F
The phone was bought directly from Samsung via Amazon and is unlocked. I live in the UK and my sim is registered to Virgin.
Currently I can put the phone in Downloading (Odin mode) and TWRP.
I have attempted to Flash the firmware with Odin but I get the following fail message each time.
"<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Added!!
<ID:0/006> Odin engine v(ID:3.1203)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!"​
I have updated my drivers and attempted to use a different port on my PC.
I am using Odin v3.12
I have attempted to use Smart Switch but I get the error message
"SM-G920F does not support initialising. Please contact our service centre."
Samsung service centre did not know what to do with the phone.
I would appreciate any advice. I've accepted my phone data is gone.

Gullion said:
Hi
When unrooting my phone I accidentally deleted the OS from my Samsung S6.
My model is SM-G920F
The phone was bought directly from Samsung via Amazon and is unlocked. I live in the UK and my sim is registered to Virgin.
Currently I can put the phone in Downloading (Odin mode) and TWRP.
I have attempted to Flash the firmware with Odin but I get the following fail message each time.
"<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Added!!
<ID:0/006> Odin engine v(ID:3.1203)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sboot.bin
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!"​
I have updated my drivers and attempted to use a different port on my PC.
I am using Odin v3.12
I have attempted to use Smart Switch but I get the error message
"SM-G920F does not support initialising. Please contact our service centre."
Samsung service centre did not know what to do with the phone.
I would appreciate any advice. I've accepted my phone data is gone.
Click to expand...
Click to collapse
In twrp try and flash any rom , may work

hairyfred said:
In twrp try and flash any rom , may work
Click to expand...
Click to collapse
Where would I get access to roms to Flash in twrp?
Are they the same as .tar or .md5 files?

Gullion said:
Where would I get access to roms to Flash in twrp?
Are they the same as .tar or .md5 files?
Click to expand...
Click to collapse
......you've never flashed a rom have you.... Is this your first time rooting

hairyfred said:
......you've never flashed a rom have you.... Is this your first time rooting
Click to expand...
Click to collapse
I've flashed with Odin in the past. Not with TWRP.
But yeah, I'm honestly a noob in way over my head.
I've had a new error on Odin attempting to flash.
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> cache.img
<ID:0/004> cm.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)​

if u can accses twrp just flash a rom and it should be good

First of all. What Samsung Firmware are you flashing, are you trying to downgrade to a older firmware version than what is already on there?
Try the latest samsung firmware and make sure it's suited for the model of your device.
Try another usb port and another microUSB cable. It is common for bad microUSB cables to make ODIN flash fail.

Can't load J700p into bootloader

So i recently flashed lineage 14.1 j7ltespr to my J700p, and the rom loaded up fine, but it won't recognize the sim card. As this is my daily driver that can't be the case, so i tried to flash a stock rom back on. I think i could get it to work, but the phone won't boot into bootloader anymore.
It has the most recent version of twrp for the model. And it will system boot, and boot recovery just fine. But when i try to boot loader, it just gives me a charging symbol, and freezes. I've been trying to fix this anyway i can for the last 12 hours.
I also tried adb, and odin. Odin gives me an auth error every time i try to load a stock rom. If anyone could help, i'd be very appreciative.
I'd take fixing the sim not found, the bootloader not coming up, or the NAND Write Start!! FAIL! (Auth) error
thank you for your time

J700P
tjjc4 said:
So i recently flashed lineage 14.1 j7ltespr to my J700p, and the rom loaded up fine, but it won't recognize the sim card. As this is my daily driver that can't be the case, so i tried to flash a stock rom back on. I think i could get it to work, but the phone won't boot into bootloader anymore.
It has the most recent version of twrp for the model. And it will system boot, and boot recovery just fine. But when i try to boot loader, it just gives me a charging symbol, and freezes. I've been trying to fix this anyway i can for the last 12 hours.
I also tried adb, and odin. Odin gives me an auth error every time i try to load a stock rom. If anyone could help, i'd be very appreciative.
I'd take fixing the sim not found, the bootloader not coming up, or the NAND Write Start!! FAIL! (Auth) error
thank you for your time
Click to expand...
Click to collapse
Can you go into settings an turn off adb root then you should be able to flash stock from Odin ! Use Odin 3.12.5 !!

peter couniaz said:
Can you go into settings an turn off adb root then you should be able to flash stock from Odin ! Use Odin 3.12.5 !!
Click to expand...
Click to collapse
Thank you peter for the advice. I tried what you suggested. Still no luck. Here is the output of the odin runs, they were all identical though i tried different roms, 3 different versions of odin, root on and off, as well as with debugging on and off. Same out put every time.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 2970 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Also the output on the download screen on the phone throws this error
SW REV CHECK FAIL : [aboot] Fused 2 > Binary 1
I hope that helps.

J700P
tjjc4 said:
Thank you peter for the advice. I tried what you suggested. Still no luck. Here is the output of the odin runs, they were all identical though i tried different roms, 3 different versions of odin, root on and off, as well as with debugging on and off. Same out put every time.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 2970 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Also the output on the download screen on the phone throws this error
SW REV CHECK FAIL : [aboot] Fused 2 > Binary 1
I hope that helps.
Click to expand...
Click to collapse
It all or nothing on this if you can get into recovery factory reset then wipe system an go into download mod an try Odin one last time ! But before all that make shore debugging is on an make shore you are using a Samsung usb cord best the one that came with the phone ! An use Odin 3.12.5 or older 3.13.01 doesn't work right for that phone !!! PS make the firmware file isn't mest up ! Get the latest firmware file !