helo..
my phone gt-p3100
cannot enter recovery (pwr+vol+) and download mode (pwr+vol-), but just stuck in "firmware upgrade encountered an issue, please recovery mode in kies & try again",but the device still connec and sync to odin.
when flashing use odin 3.07 with stock rom from samsung-updates.com / or cwm/twrp/chillpilz recovery for my device the flasher complete and pass..but after auto rebooting just got black screen,and if press power got back to firmware upgrade encontered an issue.
here the odin log :
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P3100XXCME2_P3100OLBCME2_P3100DXDLL1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> system.img
<ID:0/004> NAND Write Start!!
<ID:0/004> boot.img
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> recovery.img
<ID:0/004> MLO
<ID:0/004> param.lfs
<ID:0/004> Sbl.bin
<ID:0/004> modem.bin
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/004> Added!!
tired use another odin version just get flashing FAIL and other gt-p3100 still stuck firmware issue
anyone can give me another solusion ?
i aready read all thread in forum xda about flashing/brick/recovery...but still no luck
Flash the PIT file
Sent from my Galaxy Tab 2 3G using Tapatalk
joblee said:
Flash the PIT file
Sent from my Galaxy Tab 2 3G using Tapatalk
Click to expand...
Click to collapse
Have u get a pit file for 16gb tab2
Sent from my GT-N7000 using xda Forums PRO
Uninstall KIES.
shahkbrmn said:
Have u get a pit file for 16gb tab2
Sent from my GT-N7000 using xda Forums PRO
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2552155
For the pit file
Sent from my Nexus using Tapatalk
Related
Hi,
I have visited to Samsung Service Center to upgrade from Froyo to Gingerbird, But they failed. Even when I upgraded thorugh Kies and with ODIN, The uprading process has been done successfully, but porblem to reboot just after the upgrading.
Now again i have to degrade the version and my mobile now Froyo "I9003DDKB2_ODDKA6_DDKA5".
What Can i do for upgrading...Please help.
Thanks...
to gingerbread just flash
1.Flash full XXKPE(PDA,PHONE,BOOTLOADER,CSC)+pit
2.Flash full XXKPE
and for stable firmware GB
3.Flash DDLF2
Samsung Galaxy I9003 upgrade prob:Froyo to Gingerbird by ODIN and Service Center.
MR.Volkf said:
to gingerbread just flash
1.Flash full XXKPE(PDA,PHONE,BOOTLOADER,CSC)+pit
2.Flash full XXKPE
and for stable firmware GB
3.Flash DDLF2
Click to expand...
Click to collapse
Thanks for your feedback...
I tired to search the following task list but not able to found.:crying:
CODE_I9003XXKPE_CL409735_REV08_user_low_ship.tar
MODEM_I9003XXKPE_REV_00_CL1041909.tar
APBOOT_I9003XXKPE_CL409735_REV08_user_low_ship.tar
GT-I9003-CSC-MULTI-OXAKPE.tar
can anybody provide the downable link....
Thanks ......
singh29 said:
Thanks for your feedback...
I tired to search the following task list but not able to found.:crying:
CODE_I9003XXKPE_CL409735_REV08_user_low_ship.tar
MODEM_I9003XXKPE_REV_00_CL1041909.tar
APBOOT_I9003XXKPE_CL409735_REV08_user_low_ship.tar
GT-I9003-CSC-MULTI-OXAKPE.tar
can anybody provide the downable link....
Thanks ......
Click to expand...
Click to collapse
You can find it all here bro.. http://forum.xda-developers.com/showthread.php?t=1004647
Samsung Galaxy I9003 upgrade prob:Froyo to Gingerbird by ODIN and Service Center.
malungkot said:
You can find it all here bro.. http://forum.xda-developers.com/showthread.php?t=1004647
Click to expand...
Click to collapse
Can I flesh with the "XKPQ (4 files + pit)" files instead of "XXKPE (4 files + pit)" files ?
singh29 said:
Can I flesh with the "XKPQ (4 files + pit)" files instead of "XXKPE (4 files + pit)" files ?
Click to expand...
Click to collapse
Yes, best to skip the bootloader(APBOOT_I9003XXKPQ_CL709629_REV08_user_low_ship.tar)..flash PIT + PDA + PHONE +CSC
Samsung Galaxy I9003 upgrade prob:Froyo to Gingerbird by ODIN and Service Center.
wee2wee said:
Yes, best to skip the bootloader(APBOOT_I9003XXKPQ_CL709629_REV08_user_low_ship.tar)..flash PIT + PDA + PHONE +CSC
Click to expand...
Click to collapse
Thanks for your replay...
Again Unable to Flesh.......
I have tried with the both XXKPE and XXKPQ files for flesh but unable to flesh. The problem is only coming for booting after fleshed. I have also tried with the "GT-I9003_PDA-XXKPE-fixed (2).tar" but again failed. Used Odin is "Odin3_v3.04". I have done "Restore Factory" internal SD card and then tried but unable to flesh.
After that i have to back with the "I9003DDKB2_ODDKA6_DDKA5.rar" Version.
Used the following files.
PI: latona_20110114.pit
PDA: CODE_I9003XXKPE_CL409735_REV08_user_low_ship.tar
PHONE: MODEM_I9003XXKPE_REV_00_CL1041909.tar
BOOTLOADER: APBOOT_I9003XXKPE_CL409735_REV08_user_low_ship.tar
CSC: GT-I9003-CSC-MULTI-OXAKPE.tar
AND
latona_20110114.pit
APBOOT_I9003XXKPQ_CL709629_REV08_user_low_ship.tar.md5
CODE_I9003XXKPQ_CL709629_REV08_user_low_ship.tar.md5
GT-I9003-CSC-SERKPQ.tar.md5
MODEM_I9003XXKPQ_REV_00_CL1076353.tar.md5
I don't know what the problem is? :crying::crying::crying:
singh29 said:
Thanks for your replay...
Again Unable to Flesh.......
I have tried with the both XXKPE and XXKPQ files for flesh but unable to flesh. The problem is only coming for booting after fleshed. I have also tried with the "GT-I9003_PDA-XXKPE-fixed (2).tar" but again failed. Used Odin is "Odin3_v3.04". I have done "Restore Factory" internal SD card and then tried but unable to flesh.
After that i have to back with the "I9003DDKB2_ODDKA6_DDKA5.rar" Version.
Used the following files.
PI: latona_20110114.pit
PDA: CODE_I9003XXKPE_CL409735_REV08_user_low_ship.tar
PHONE: MODEM_I9003XXKPE_REV_00_CL1041909.tar
BOOTLOADER: APBOOT_I9003XXKPE_CL409735_REV08_user_low_ship.tar
CSC: GT-I9003-CSC-MULTI-OXAKPE.tar
AND
latona_20110114.pit
APBOOT_I9003XXKPQ_CL709629_REV08_user_low_ship.tar.md5
CODE_I9003XXKPQ_CL709629_REV08_user_low_ship.tar.md5
GT-I9003-CSC-SERKPQ.tar.md5
MODEM_I9003XXKPQ_REV_00_CL1076353.tar.md5
I don't know what the problem is? :crying::crying::crying:
Click to expand...
Click to collapse
Do you mean the phone does not boot up(stuck at Samsung logo)after flashed XXKPE or XXKPQ and you can boot up after flashed back to Froyo "I9003DDKB2_ODDKA6_DDKA5..that's strange
singh29 said:
Thanks for your replay...
Again Unable to Flesh.......
I have tried with the both XXKPE and XXKPQ files for flesh but unable to flesh. The problem is only coming for booting after fleshed. I have also tried with the "GT-I9003_PDA-XXKPE-fixed (2).tar" but again failed. Used Odin is "Odin3_v3.04". I have done "Restore Factory" internal SD card and then tried but unable to flesh.
After that i have to back with the "I9003DDKB2_ODDKA6_DDKA5.rar" Version.
Used the following files.
PI: latona_20110114.pit
PDA: CODE_I9003XXKPE_CL409735_REV08_user_low_ship.tar
PHONE: MODEM_I9003XXKPE_REV_00_CL1041909.tar
BOOTLOADER: APBOOT_I9003XXKPE_CL409735_REV08_user_low_ship.tar
CSC: GT-I9003-CSC-MULTI-OXAKPE.tar
AND
latona_20110114.pit
APBOOT_I9003XXKPQ_CL709629_REV08_user_low_ship.tar.md5
CODE_I9003XXKPQ_CL709629_REV08_user_low_ship.tar.md5
GT-I9003-CSC-SERKPQ.tar.md5
MODEM_I9003XXKPQ_REV_00_CL1076353.tar.md5
I don't know what the problem is? :crying::crying::crying:
Click to expand...
Click to collapse
dnt panic...download XXKPE package, inside that package itself u will find Latona.pit file......now put ur mobile in download mode,connect to odin,flash latona.pit...then remove usb cable nd battery ..again put ur phone in download mode,connect to odin, then flash all 4 files in xxkpe,....that's it..wait for 15 min..u phone will boot up.
---------- Post added at 09:33 PM ---------- Previous post was at 09:30 PM ----------
frst flash latona.pit file alone separately...then u will get a black screen..after that again enter download mode and then connect to odin and flash remaining 4 files..
devasenan200 said:
dnt panic...download XXKPE package, inside that package itself u will find Latona.pit file......now put ur mobile in download mode,connect to odin,flash latona.pit...then remove usb cable nd battery ..again put ur phone in download mode,connect to odin, then flash all 4 files in xxkpe,....that's it..wait for 15 min..u phone will boot up.
---------- Post added at 09:33 PM ---------- Previous post was at 09:30 PM ----------
frst flash latona.pit file alone separately...then u will get a black screen..after that again enter download mode and then connect to odin and flash remaining 4 files..
Click to expand...
Click to collapse
Thanks for your feedback...
Again, Fail to upgrade. As per your comment, I have stand for 30 min after fleshed. Please find the below process has been done with XXKPE package:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> APBOOT_I9003XXKPE_CL409735_REV08_user_low_ship.tar.md5 is valid.
<OSM> CODE_I9003XXKPE_CL409735_REV08_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9003XXKPE_REV_00_CL1041909.tar.md5 is valid.
<OSM> GT-I9003-CSC-MULTI-OXAKPE.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.bin
<ID:0/004> Sbl.bin
<ID:0/004> param.lfs
<ID:0/004> normalboot.img
<ID:0/004> boot.bin
<ID:0/004> Sbl.bin
<ID:0/004> param.lfs
<ID:0/004> system.rfs
<ID:0/004> cache.rfs
<ID:0/004> userdata.rfs
<ID:0/004> modem.bin
<ID:0/004> Transmission Complete..
<ID:0/004> Now Writing.. Please wait about 2 minutes
<ID:0/004> Receive Response form LOKE
<ID:0/004> cache.rfs
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
When above process has not been done again i have to back with the Froyo Version. Please find the below process has been done with Froyo "I9003DDKB2_ODDKA6_DDKA5.rar" package:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.rfs
<ID:0/004> modem.bin
<ID:0/004> normalboot.img
<ID:0/004> Sbl.bin
<ID:0/004> system.rfs
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Completed..
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/004> Removed!!
<ID:0/003> Added!!
Thanks......
singh29 said:
Thanks for your feedback...
Again, Fail to upgrade. As per your comment, I have stand for 30 min after fleshed. Please find the below process has been done with XXKPE package:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> APBOOT_I9003XXKPE_CL409735_REV08_user_low_ship.tar.md5 is valid.
<OSM> CODE_I9003XXKPE_CL409735_REV08_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9003XXKPE_REV_00_CL1041909.tar.md5 is valid.
<OSM> GT-I9003-CSC-MULTI-OXAKPE.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.bin
<ID:0/004> Sbl.bin
<ID:0/004> param.lfs
<ID:0/004> normalboot.img
<ID:0/004> boot.bin
<ID:0/004> Sbl.bin
<ID:0/004> param.lfs
<ID:0/004> system.rfs
<ID:0/004> cache.rfs
<ID:0/004> userdata.rfs
<ID:0/004> modem.bin
<ID:0/004> Transmission Complete..
<ID:0/004> Now Writing.. Please wait about 2 minutes
<ID:0/004> Receive Response form LOKE
<ID:0/004> cache.rfs
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
When above process has not been done again i have to back with the Froyo Version. Please find the below process has been done with Froyo "I9003DDKB2_ODDKA6_DDKA5.rar" package:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.rfs
<ID:0/004> modem.bin
<ID:0/004> normalboot.img
<ID:0/004> Sbl.bin
<ID:0/004> system.rfs
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Completed..
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 1 / failed
after flashing xxkpe, what Is happening?..did you flash latona file separately first?
Click to expand...
Click to collapse
devasenan200 said:
singh29 said:
Thanks for your feedback...
Again, Fail to upgrade. As per your comment, I have stand for 30 min after fleshed. Please find the below process has been done with XXKPE package:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> APBOOT_I9003XXKPE_CL409735_REV08_user_low_ship.tar.md5 is valid.
<OSM> CODE_I9003XXKPE_CL409735_REV08_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9003XXKPE_REV_00_CL1041909.tar.md5 is valid.
<OSM> GT-I9003-CSC-MULTI-OXAKPE.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.bin
<ID:0/004> Sbl.bin
<ID:0/004> param.lfs
<ID:0/004> normalboot.img
<ID:0/004> boot.bin
<ID:0/004> Sbl.bin
<ID:0/004> param.lfs
<ID:0/004> system.rfs
<ID:0/004> cache.rfs
<ID:0/004> userdata.rfs
<ID:0/004> modem.bin
<ID:0/004> Transmission Complete..
<ID:0/004> Now Writing.. Please wait about 2 minutes
<ID:0/004> Receive Response form LOKE
<ID:0/004> cache.rfs
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
When above process has not been done again i have to back with the Froyo Version. Please find the below process has been done with Froyo "I9003DDKB2_ODDKA6_DDKA5.rar" package:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> cache.rfs
<ID:0/004> modem.bin
<ID:0/004> normalboot.img
<ID:0/004> Sbl.bin
<ID:0/004> system.rfs
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Completed..
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 1 / failed
after flashing xxkpe, what Is happening?..did you flash latona file separately first?
Click to expand...
Click to collapse
Yes.... I have tested on both condition with use "Restore factory". Previous i did with the package. but result : Negative
Again I have fleshed separately (latona) and other 4 files.
After 30 min when found result as a negative; I have to flesh with Froyo Version "I9003DDKB2_ODDKA6_DDKA5.rar" and It working fine. No problem found for rebooting.
Click to expand...
Click to collapse
singh29 said:
devasenan200 said:
Yes.... I have tested on both condition with use "Restore factory". Previous i did with the package. but result : Negative
Again I have fleshed separately (latona) and other 4 files.
After 30 min when found result as a negative; I have to flesh with Froyo Version "I9003DDKB2_ODDKA6_DDKA5.rar" and It working fine. No problem found for rebooting.
Click to expand...
Click to collapse
I think prob is only rebooting.
Click to expand...
Click to collapse
any update regarding prob for upgrading froyo to gingerbird or upper version...
singh29 said:
singh29 said:
I think prob is only rebooting.
Click to expand...
Click to collapse
any update regarding prob for upgrading froyo to gingerbird or upper version...
Click to expand...
Click to collapse
Successfully Root the galaxy I9003 but unable to upgrade from froyo to upper version.
singh29 said:
singh29 said:
any update regarding prob for upgrading froyo to gingerbird or upper version...
Click to expand...
Click to collapse
I have successfully Rooted the galaxy I9003 but unable to upgrade from froyo to upper version.
I have tried with the both XXKPE and XXKPQ files for flesh but result is negative. The problem is only coming for booting after fleshed.
Pelase help..
Should i visit to service center for upgrading. ??
Click to expand...
Click to collapse
Hi guys, don't use Odin 3.04
It cause problems, use Odin 1.85
Sent from my C2105 using Tapatalk
..
Could u please put the files needed for flashing the jpkp5 rom?(pit,bootloader,etc)
as chongns said use odin 1.85 or 1.85
remember to check re-partition when flashing latona.pit and uncheck it when flashing the rest of the files
when flashing remember to flash two times the same passage some phones dosen't update correctly with only one flash
I have a Samsung Galaxy Tab2 (P5100) with stock Samsung Android 4.0.3.
I have tried to install a ROM Samsung 4.2.2 stock via Odin (i tried 1.83 - 3.09 - 3.10.6), and it seems to be all ok.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P5100XXDMJ2_P5100ITVDMJ1_P5100XXDMG1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> system.img
<ID:0/004> boot.img
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> recovery.img
<ID:0/004> modem.bin
<ID:0/004> MLO
<ID:0/004> param.lfs
<ID:0/004> Sbl.bin
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/005> Added!!
<ID:0/005> Removed!!
<ID:0/005> Added!!
When i reboot the tablet... nothing has appened!!!
The same thing if I try to install a new recovery.
Trying to install from ext using the stock recovery it can't verify the signature.
Can anyone help me? (p.s. sorry for my english...)
andreavanzini said:
I have a Samsung Galaxy Tab2 (P5100) with stock Samsung Android 4.0.3.
I have tried to install a ROM Samsung 4.2.2 stock via Odin (i tried 1.83 - 3.09 - 3.10.6), and it seems to be all ok.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P5100XXDMJ2_P5100ITVDMJ1_P5100XXDMG1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> system.img
<ID:0/004> boot.img
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> recovery.img
<ID:0/004> modem.bin
<ID:0/004> MLO
<ID:0/004> param.lfs
<ID:0/004> Sbl.bin
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/005> Added!!
<ID:0/005> Removed!!
<ID:0/005> Added!!
When i reboot the tablet... nothing has appened!!!
The same thing if I try to install a new recovery.
Trying to install from ext using the stock recovery it can't verify the signature.
Can anyone help me? (p.s. sorry for my english...)
Click to expand...
Click to collapse
Was auto reboot unchecked or checked?
I am going to notify a moderator so this thread can get moved to q&a.
Have a great day!
jrc2 said:
Was auto reboot unchecked or checked?
I am going to notify a moderator so this thread can get moved to q&a.
Have a great day!
Click to expand...
Click to collapse
I tried in both ways. It's The same...
Sent from my SM-N910F using XDA Free mobile app
andreavanzini said:
I tried in both ways. It's The same...
Sent from my SM-N910F using XDA Free mobile app
Click to expand...
Click to collapse
Do you happen to have a computer running a Linux-based OS?
jrc2 said:
Do you happen to have a computer running a Linux-based OS?
Click to expand...
Click to collapse
Not now. May be on monday.
Sent from my SM-N910F using XDA Free mobile app
andreavanzini said:
Not now. May be on monday.
Sent from my SM-N910F using XDA Free mobile app
Click to expand...
Click to collapse
Alright. If you do, please let me know and I can probably assist you with that.
jrc2 said:
Alright. If you do, please let me know and I can probably assist you with that.
Click to expand...
Click to collapse
Ok. Thank you.
Sent from my SM-N910F using XDA Free mobile app
andreavanzini said:
Ok. Thank you.
Sent from my SM-N910F using XDA Free mobile app
Click to expand...
Click to collapse
Just an FYI, instead of saying thank you, just click thanks. It keeps the threads neater.
andreavanzini said:
I have a Samsung Galaxy Tab2 (P5100) with stock Samsung Android 4.0.3.
I have tried to install a ROM Samsung 4.2.2 stock via Odin (i tried 1.83 - 3.09 - 3.10.6), and it seems to be all ok.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P5100XXDMJ2_P5100ITVDMJ1_P5100XXDMG1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> system.img
<ID:0/004> boot.img
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> recovery.img
<ID:0/004> modem.bin
<ID:0/004> MLO
<ID:0/004> param.lfs
<ID:0/004> Sbl.bin
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/005> Added!!
<ID:0/005> Removed!!
<ID:0/005> Added!!
When i reboot the tablet... nothing has appened!!!
The same thing if I try to install a new recovery.
Trying to install from ext using the stock recovery it can't verify the signature.
Can anyone help me? (p.s. sorry for my english...)
Click to expand...
Click to collapse
Alo, the odin detect the tablet in computer?
jrc2 said:
Alright. If you do, please let me know and I can probably assist you with that.
Click to expand...
Click to collapse
Ok jrc2, i'm ready...
andreavanzini said:
Ok jrc2, i'm ready...
Click to expand...
Click to collapse
PM me your Gmail address and I will help you through Hnagouts.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920FXXU1AODE_G920FOXE1AODE_G920FXXU1AODE_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> cm.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> modem.bin
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
HELP?
I tried two firmwares already and its the same...
cipjanin said:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920FXXU1AODE_G920FOXE1AODE_G920FXXU1AODE_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> cm.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> modem.bin
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
HELP?
Click to expand...
Click to collapse
guess you treid to flash the Italian ROM right?
here is the solution.: http://forum.xda-developers.com/galaxy-s6/help/solved-stuck-download-mode-failed-odin-t3104736
use the file (recovery)with Odin after it fails at hidden.img and it will fix it for you
johanbiff said:
guess you treid to flash the Italian ROM right?
here is the solution.: http://forum.xda-developers.com/galaxy-s6/help/solved-stuck-download-mode-failed-odin-t3104736
use the file (recovery)with Odin after it fails at hidden.img and it will fix it for you
Click to expand...
Click to collapse
I dont get it.
When it fails, what i need to do?
To flash the recovery?
for example it fails at hidden.img, i reset the odin and flash recovery file named my recovery in the link u posted?
I really dont get it...
Actually i flashed the original firmware for mine csc and passed...
So actually u cant flash other firmwares region...
cipjanin said:
I dont get it.
When it fails, what i need to do?
To flash the recovery?
for example it fails at hidden.img, i reset the odin and flash recovery file named my recovery in the link u posted?
I really dont get it...
Actually i flashed the original firmware for mine csc and passed...
So actually u cant flash other firmwares region...
Click to expand...
Click to collapse
Correct. you Flash The file in the link after it fails under the flashig hidden.img then it restores the Flash with The Italian firmware
johanbiff said:
Correct. you Flash The file in the link after it fails under the flashig hidden.img then it restores the Flash with The Italian firmware
Click to expand...
Click to collapse
do you have the file?
Hidden.img fail..... just flash a pit file and you're OK
http://forum.gsmhosting.com/vbb/attachment.php?attachmentid=337402&d=1430923305
Edit: i think you need to have account to download from gsmhosting. If YES search g920F pit file somewhere else and flash it
johanbiff said:
guess you treid to flash the Italian ROM right?
here is the solution.: http://forum.xda-developers.com/galaxy-s6/help/solved-stuck-download-mode-failed-odin-t3104736
use the file (recovery)with Odin after it fails at hidden.img and it will fix it for you
Click to expand...
Click to collapse
So I'm not sure I understand. where can I find this file (recovery)?
cipjanin said:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920FXXU1AODE_G920FOXE1AODE_G920FXXU1AODE_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> cm.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> modem.bin
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
HELP?
Click to expand...
Click to collapse
Just found a solution here: http://www.droidviews.com/fixing-odin-firmware-installation-failed-at-hidden-img-issue-on-samsung/
Worked like a charm for me.
hidden.img
use winwar to open firmware file...
hidden.img
rename the file to this
hidden.img.tar
put file back and flash it should fix it
hlo sir can I change the hex code in the firmware to enable the oem as my phone is not opening and I am unable to install custom recovery as frp lock is on and also my usb developer option is not open?
As frp lock gets off when oem is enable ,so is there any way that I can modify the firmware inorder to load the custom recovery?Any help ,please sir
Hello guys i was going to re flash my phone back to 5.1.1 (used the beta android 6.0) used this one to get 6.0 http://www.sammobile.com/firmwares/download/54860/G920FXXU2COH2_G920FBTU2COH3_BTU/ and downloaded this one http://www.sammobile.com/firmwares/download/61178/G920FXXU3QOKD_G920FNEE3QOKD_NEE/
And i forgot now that it needed to be same numbers or what i should say in odin it says failed heres a dump
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> cm.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> modem.bin
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Should i just restart the phone go back to download mode and download this one http://www.sammobile.com/firmwares/download/55165/G920FXXU2COH2_G920FNEE2COH3_NEE/ re add it to Odin and re flash? Or will i do this more worse than it is right now?
Just flash a pit file.. factory reset from recovery ans you're OK
lummujaj said:
Just flash a pit file.. factory reset from recovery ans you're OK
Click to expand...
Click to collapse
Can you guide me abit more about this i re enter the download mode cant i just put in the right
NEE:
PDA G920FXXU2COH2
CSC G920FNEE2COH3
BTU
Product code BTU
PDA G920FXXU2COH2
CSC G920FBTU2COH3
The NEE PDA and CSC is the same as the BTU now and i downloading that NEE version again from sammobile cant i juse put the right NEE in odin and reflash?
Hey again nevermind did an emergency reset from samsung smart switch and now the phone is working
helo..
my tablet gt-p5110
cannot enter recovery (pwr+vol+) and download mode (pwr+vol-), but just stuck in "firmware upgrade encountered an issue, please recovery mode in kies & try again",but the device still connect and sync to odin.
I was using a pit file but when started there is an info from Odin that ''pit partition does not exist''.
when flashing use odin 3.07 with stock rom from samsung-updates.com / or cwm/twrp/chillpilz recovery for my device the flasher complete and pass..but after auto rebooting just got black screen,and if press power got back to firmware upgrade encontered an issue.
here the odin log :
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P3100XXCME2_P3100OLBCME2_P3100DXDLL1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> system.img
<ID:0/004> NAND Write Start!!
<ID:0/004> boot.img
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> recovery.img
<ID:0/004> MLO
<ID:0/004> param.lfs
<ID:0/004> Sbl.bin
<ID:0/004> modem.bin
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/004> Added!!
tired use another odin version just get flashing FAIL and other gt-p3100 still stuck firmware issue
anyone can give me another solusion ?
i aready read all thread in forum xda about flashing/brick/recovery...but still no luck