Related
First, I would like to thank Pogodancer in millions for his STEP by STEP tutorial which helped me to load STOCK ROM on my CUBOT C7 chinese phone. I am sure this tutorial will help others to fix their CUBOT C7 phone. This tutorial is also good for PHONES with SpreadTrum SP6820 on Android 2.3.6/4.0.1 . (Make sure you have the right STOCK ROM for your phone).
Here is the link to Pogodancer's original Post:
http://forum.xda-developers.com/showthread.php?t=2018023&page=2
HOW TO LOAD STOCK ROM ON YOUR CUBOT C7:
WARNING: YOU ARE DOING THIS PROCESS ON YOUR OWN AND I DO NOT TAKE ANY RESPONSIBILITY IF
SOMETHING GOES WRONG WITH YOUR PHONE. YOU ARE FULLY RESPONSIBLE DOING THIS PROCEDURE.
1) Download the CUBOT C7 Stock rom from here:
Stock Rom: www.cubot.net/UploadFile/Soft/C7_root_Software.rar ------ (After downloading the file EXTRACT or UNZIP it)
Here you can find other tools for CUBOT C7 - http://www.cubot.net/Service.aspx (NOTE: This is not required)
2) Download this package it has the USB Driver and Flashing Tools. Install USB Driver...
http://www55.zippyshare.com/v/44295424/file.html
3) Be sure to have installed the correct drivers. For my SC6820-device I see 5 items in Win7-32bit-device-manager (ADB-Composite, 2 x
COM-ports, 2 x USB devices: all without exclamation marks). You can use the drivers from the package folder "SCI-android-usb-driver-jungo-
v4-.rar".
4) Disable just in case your Win7 firewall. (If you are using Windows XP, you don't have to do this step)
5) Launch "ChannelServer.exe" from package folder "CHANNELSERVER" and allow firewall if asked.
6) Start "ResearchDownload.exe" from package folder "ResearchDownload".
7) In ResearchDownload-application chose firmware with first button (for me: 20121006_c909_JF_EAHC_V12.PAC).----- This is the STOCK
ROM file that you have downloaded and Extracted it on STEP 1.
8) Be sure to SET the Baudrate-settings in ResearchDownload-Settings (second button). I recommend 115200.
9) Press the Start (Play) button in ResearchDownload-application (third button).
10) Turn off the phone.
11) Keep holding the "volume down"-key.
12) Without releasing the button "volume down" plug the usb-cord from phone to your PC (install the driver if not done before in step 2).
13) Keep holding down the Volume Down button..... The process of firmware-burning should start now in ResearchDownload-application and
take approximately 1 Minute.
11. Wait until the firmware-flashing has been finished (A green sign appeares + "Passed" is written in ResearchDownload-application).
12. Remove the battery, wait 20 seconds. Put battery back and turn on the phone (first boot may take a while but not more than 5 minutes).
Use this at your own risk.
No cigar on Cubot C7
Tried, but did not work on Win7 64. Drivers install but Windows says the device would not run because signature is too old.
:crying:
z_man3007 said:
First, I would like to thank Pogodancer in millions for his STEP by STEP tutorial which helped me to load STOCK ROM on my CUBOT C7 chinese phone. I am sure this tutorial will help others to fix their CUBOT C7 phone. This tutorial is also good for PHONES with SpreadTrum SP6820 on Android 2.3.6/4.0.1 . (Make sure you have the right STOCK ROM for your phone).
Here is the link to Pogodancer's original Post:
http://forum.xda-developers.com/showthread.php?t=2018023&page=2
HOW TO LOAD STOCK ROM ON YOUR CUBOT C7:
WARNING: YOU ARE DOING THIS PROCESS ON YOUR OWN AND I DO NOT TAKE ANY RESPONSIBILITY IF
SOMETHING GOES WRONG WITH YOUR PHONE. YOU ARE FULLY RESPONSIBLE DOING THIS PROCEDURE.
1) Download the CUBOT C7 Stock rom from here:
Stock Rom: www.cubot.net/UploadFile/Soft/C7_root_Software.rar ------ (After downloading the file EXTRACT or UNZIP it)
Here you can find other tools for CUBOT C7 - http://www.cubot.net/Service.aspx (NOTE: This is not required)
2) Download this package it has the USB Driver and Flashing Tools. Install USB Driver...
http://www55.zippyshare.com/v/44295424/file.html
3) Be sure to have installed the correct drivers. For my SC6820-device I see 5 items in Win7-32bit-device-manager (ADB-Composite, 2 x
COM-ports, 2 x USB devices: all without exclamation marks). You can use the drivers from the package folder "SCI-android-usb-driver-jungo-
v4-.rar".
4) Disable just in case your Win7 firewall. (If you are using Windows XP, you don't have to do this step)
5) Launch "ChannelServer.exe" from package folder "CHANNELSERVER" and allow firewall if asked.
6) Start "ResearchDownload.exe" from package folder "ResearchDownload".
7) In ResearchDownload-application chose firmware with first button (for me: 20121006_c909_JF_EAHC_V12.PAC).----- This is the STOCK
ROM file that you have downloaded and Extracted it on STEP 1.
8) Be sure to SET the Baudrate-settings in ResearchDownload-Settings (second button). I recommend 115200.
9) Press the Start (Play) button in ResearchDownload-application (third button).
10) Turn off the phone.
11) Keep holding the "volume down"-key.
12) Without releasing the button "volume down" plug the usb-cord from phone to your PC (install the driver if not done before in step 2).
13) Keep holding down the Volume Down button..... The process of firmware-burning should start now in ResearchDownload-application and
take approximately 1 Minute.
11. Wait until the firmware-flashing has been finished (A green sign appeares + "Passed" is written in ResearchDownload-application).
12. Remove the battery, wait 20 seconds. Put battery back and turn on the phone (first boot may take a while but not more than 5 minutes).
Use this at your own risk.
Click to expand...
Click to collapse
Cubot C7
kostar said:
Tried, but did not work on Win7 64. Drivers install but Windows says the device would not run because signature is too old.
:crying:
Click to expand...
Click to collapse
Have you tried downloading the 64-bit driver from cubot dot net webside?. Here is the link
Darn, I cant post a link here.... go to cubot dot net website and click on services and download C7 USB Driver.
Once you download the file. Extract it and in there you will find X64 and X86 Folder. Use the drivers from X64 folder cause you are using 64-bit Windows 7.
Cant download the "C7_root_software.rar"
Ok so i just followed another tutorial on how to root the Cubot and unfortunatelz the telephone is stuck on bootcycle for whatever reason. I believe I didnt delete any critical application, but hey ... simply wont boot up.
Now I cant download the C7_root_software from the cubot-net website. Could anyone please upload the software somewhere else so I could download it and load stock ROM on my device. Would be a great help for me.
Thanks in advance to all of those concerned.
Worked
Hello guyz, an update after 2 hours. I did successfully load stock ROM on Cubot C7 from ebay. Exactly like the tutorial says. Thanks for the tutorial.
I just thought that as the download from cubot net is reaaaallly slow and I have even requested the ROM myself others may have the same problem so here you go a mega key for the files
C7_root_software: Hp2f3lp-UerqPjPs2pUu-jgzruFj59Dtz0B5ScLZSGE
Debug_Tool: ByLnzD1Q7XgPALRoYx35GnEnyIcsX_oIMCLlMyRSY7w
I cant post links and those are file keys to download from Mega.co.nz, simply search for "download from mega with file key".
Thanks for the tutorial and see you around.
CUBOT C7 - How to root
pijemcolu said:
Ok so i just followed another tutorial on how to root the Cubot and unfortunatelz the telephone is stuck on bootcycle for whatever reason. I believe I didnt delete any critical application, but hey ... simply wont boot up.
Now I cant download the C7_root_software from the cubot-net website. Could anyone please upload the software somewhere else so I could download it and load stock ROM on my device. Would be a great help for me.
Thanks in advance to all of those concerned.
Click to expand...
Click to collapse
The easiest way to root Cubot C7 is using Z4Root.apk tool. Download the pack from the web and copy over to your phones internal storage.
Here are the steps:
1) Install the Z4Root on your phone.
2) Run Z4Root on your phone.
3) First, run Temporary Root, You will see Superuser icon if it ran successfully.
4) Run Z4Root again and this time Run Permanent Root. You phone will boot and you will have your phone permanently rooted.
Thanks
Thank you so much for your help, follow the guide, all worked great, download was abit slow but I didn't worry about that knowing this is the only god dam tutrial I can find, thanks so much, had to register to make this post.
Thanks for the stock rom.I am now currently making a custom rom for the CUBOT C7
CUBOT C7
In case, anyone having trouble downloading the CUBOT C7 STOCK rom please download it from the following link. Thanks
https://mega.co.nz/#!5A1zURIK!BI-fQWVttxOcSDRd4jMTuzwl7xFcyxP9463-lq9GmqU
It's not working
Hello everyone,i did it just like above said,but it doesn't do anything,like the channel server is not connecting,and also the research download is not doing anything.
The drivers are installed,only a yellow triangle with information like signature,is there anyway to do something about it?
Windows 7 64bit,cubot c7 Android 2.3.9.
Now the reason is for the upgrading is that i have two issues,one with the signal is not wel,like cutting voice,from the mic of the phone,when talking through the phone but with the earphones it's much beter.second is that the bluetooth headset is only working for transfering audio like music to the BT earphone,and when talk to the phone i cannot hear or other people cannot hear me at all,it;s like muted the phone!!!!
Any one know about it,i cannot find anything here.
n.b.:tried 3 BT earphones
Also i see when i have a usim in the phone,it's like that there is 3G system!
Anybody?
Hello,i'm searching on the forum+net,but i cannot load again the update.zip from the site because there is no recovery option after install stock rom !Maybe someone has a solution for this?
Update the update.zip
gvanels said:
Hello everyone,i did it just like above said,but it doesn't do anything,like the channel server is not connecting,and also the research download is not doing anything.
The drivers are installed,only a yellow triangle with information like signature,is there anyway to do something about it?
Windows 7 64bit,cubot c7 Android 2.3.9.
Now the reason is for the upgrading is that i have two issues,one with the signal is not wel,like cutting voice,from the mic of the phone,when talking through the phone but with the earphones it's much beter.second is that the bluetooth headset is only working for transfering audio like music to the BT earphone,and when talk to the phone i cannot hear or other people cannot hear me at all,it;s like muted the phone!!!!
Any one know about it,i cannot find anything here.
n.b.:tried 3 BT earphones
Also i see when i have a usim in the phone,it's like that there is 3G system!
Click to expand...
Click to collapse
So after searching i did it!BUT in order to fix things(only fixed BT audio)there are many things that i don't can do....like a sync only apps,and after an restart i must put again a code,or the memory is out,and ofcourse no recovery menu,and other minor issues,How can i restore the rom that there is on there site/support.Maybe someone knows how to update the update.zip without recovery menu?
Thank you, on the very detailed,
Help please
Hello, I have a T999 dual sim (looks like a Xperia) it has sp6820a with 650mhz, Do you think I can use this ROM?
Please help me with this, I just kill a fake S3 i9300+ to follow another instructions.
Thank you so much from Argentina
QUOTE=z_man3007;37987768]First, I would like to thank Pogodancer in millions for his STEP by STEP tutorial which helped me to load STOCK ROM on my CUBOT C7 chinese phone. I am sure this tutorial will help others to fix their CUBOT C7 phone. This tutorial is also good for PHONES with SpreadTrum SP6820 on Android 2.3.6/4.0.1 . (Make sure you have the right STOCK ROM for your phone).
Here is the link to Pogodancer's original Post:
http://forum.xda-developers.com/showthread.php?t=2018023&page=2
HOW TO LOAD STOCK ROM ON YOUR CUBOT C7:
WARNING: YOU ARE DOING THIS PROCESS ON YOUR OWN AND I DO NOT TAKE ANY RESPONSIBILITY IF
SOMETHING GOES WRONG WITH YOUR PHONE. YOU ARE FULLY RESPONSIBLE DOING THIS PROCEDURE.
1) Download the CUBOT C7 Stock rom from here:
Stock Rom: www.cubot.net/UploadFile/Soft/C7_root_Software.rar ------ (After downloading the file EXTRACT or UNZIP it)
Here you can find other tools for CUBOT C7 - http://www.cubot.net/Service.aspx (NOTE: This is not required)
2) Download this package it has the USB Driver and Flashing Tools. Install USB Driver...
http://www55.zippyshare.com/v/44295424/file.html
3) Be sure to have installed the correct drivers. For my SC6820-device I see 5 items in Win7-32bit-device-manager (ADB-Composite, 2 x
COM-ports, 2 x USB devices: all without exclamation marks). You can use the drivers from the package folder "SCI-android-usb-driver-jungo-
v4-.rar".
4) Disable just in case your Win7 firewall. (If you are using Windows XP, you don't have to do this step)
5) Launch "ChannelServer.exe" from package folder "CHANNELSERVER" and allow firewall if asked.
6) Start "ResearchDownload.exe" from package folder "ResearchDownload".
7) In ResearchDownload-application chose firmware with first button (for me: 20121006_c909_JF_EAHC_V12.PAC).----- This is the STOCK
ROM file that you have downloaded and Extracted it on STEP 1.
8) Be sure to SET the Baudrate-settings in ResearchDownload-Settings (second button). I recommend 115200.
9) Press the Start (Play) button in ResearchDownload-application (third button).
10) Turn off the phone.
11) Keep holding the "volume down"-key.
12) Without releasing the button "volume down" plug the usb-cord from phone to your PC (install the driver if not done before in step 2).
13) Keep holding down the Volume Down button..... The process of firmware-burning should start now in ResearchDownload-application and
take approximately 1 Minute.
11. Wait until the firmware-flashing has been finished (A green sign appeares + "Passed" is written in ResearchDownload-application).
12. Remove the battery, wait 20 seconds. Put battery back and turn on the phone (first boot may take a while but not more than 5 minutes).
Use this at your own risk.[/QUOTE]
t9500-b
z_man3007 said:
First, I would like to thank Pogodancer in millions for his STEP by STEP tutorial which helped me to load STOCK ROM on my CUBOT C7 chinese phone. I am sure this tutorial will help others to fix their CUBOT C7 phone. This tutorial is also good for PHONES with SpreadTrum SP6820 on Android 2.3.6/4.0.1 . (Make sure you have the right STOCK ROM for your phone).
Here is the link to Pogodancer's original Post:
http://forum.xda-developers.com/showthread.php?t=2018023&page=2
HOW TO LOAD STOCK ROM ON YOUR CUBOT C7:
WARNING: YOU ARE DOING THIS PROCESS ON YOUR OWN AND I DO NOT TAKE ANY RESPONSIBILITY IF
SOMETHING GOES WRONG WITH YOUR PHONE. YOU ARE FULLY RESPONSIBLE DOING THIS PROCEDURE.
1) Download the CUBOT C7 Stock rom from here:
Stock Rom: www.cubot.net/UploadFile/Soft/C7_root_Software.rar ------ (After downloading the file EXTRACT or UNZIP it)
Here you can find other tools for CUBOT C7 - http://www.cubot.net/Service.aspx (NOTE: This is not required)
2) Download this package it has the USB Driver and Flashing Tools. Install USB Driver...
http://www55.zippyshare.com/v/44295424/file.html
3) Be sure to have installed the correct drivers. For my SC6820-device I see 5 items in Win7-32bit-device-manager (ADB-Composite, 2 x
COM-ports, 2 x USB devices: all without exclamation marks). You can use the drivers from the package folder "SCI-android-usb-driver-jungo-
v4-.rar".
4) Disable just in case your Win7 firewall. (If you are using Windows XP, you don't have to do this step)
5) Launch "ChannelServer.exe" from package folder "CHANNELSERVER" and allow firewall if asked.
6) Start "ResearchDownload.exe" from package folder "ResearchDownload".
7) In ResearchDownload-application chose firmware with first button (for me: 20121006_c909_JF_EAHC_V12.PAC).----- This is the STOCK
ROM file that you have downloaded and Extracted it on STEP 1.
8) Be sure to SET the Baudrate-settings in ResearchDownload-Settings (second button). I recommend 115200.
9) Press the Start (Play) button in ResearchDownload-application (third button).
10) Turn off the phone.
11) Keep holding the "volume down"-key.
12) Without releasing the button "volume down" plug the usb-cord from phone to your PC (install the driver if not done before in step 2).
13) Keep holding down the Volume Down button..... The process of firmware-burning should start now in ResearchDownload-application and
take approximately 1 Minute.
11. Wait until the firmware-flashing has been finished (A green sign appeares + "Passed" is written in ResearchDownload-application).
12. Remove the battery, wait 20 seconds. Put battery back and turn on the phone (first boot may take a while but not more than 5 minutes).
Use this at your own risk.
Click to expand...
Click to collapse
hello, this firware works whit t9500-b ??
Hi has anyone the firmware of cubot c7 ....
Model LG P 500
I have successfully put my phone on emergency mode so will give it a try to boot by flashing the stock Firmware couldn't find any Working download link for stock Firmware India...
Kindly share the instructions to boot it back and with the working download link....got fed up googling
LG P 500
here we go...
[email protected] said:
Model LG P 500
I have successfully put my phone on emergency mode so will give it a try to boot by flashing the stock Firmware couldn't find any Working download link for stock Firmware India...
Kindly share the instructions to boot it back and with the working download link....got fed up googling
LG P 500
Click to expand...
Click to collapse
Code:
USING KDZ IS SKILLFULL ART AND IMPROPER USE CAN LEAD TO PERMENENT HARD BRICKED PHONE
Someone sad that following worked, someone that not. You must try and you will see...
1) Get serial number of your phone
2) Enter it in URL csmg.lgmobile.com:9002/svc/popup/model_check.jsp?model=<model_of_phone>&esn=<serial_number>
Code:
csmg.lgmobile.com:9002/svc/popup/model_check.jsp?model=[COLOR=Red]LGP500[/COLOR]&esn=[COLOR=Red]000KPPB001234[/COLOR]
3) Show page that you get in source-code view
Code:
<?xml version='1.0' encoding='utf-8' ?>
<response req_cmd='check_model' status='ok'>
<auth>
<model>LGP500</model>
<suffix>ASEABK</suffix>
<esn>[COLOR=Red]123456789012345[/COLOR]</esn>
<msn>000KPPB001234</msn>
<esndate>20101201</esndate>
<buyer>SEA</buyer>
<esnoutgodate>20101203</esnoutgodate>
<ULocationcode>N</ULocationcode>
<buyername>HUB</buyername>
<csn>LG0000440022331</csn>
</auth> </response>
4) select & copy number between <esn> elements (123456789012345)
5) Enter this number to csmg.lgmobile.com:9002/csmg/b2c/client/auth_model_check2.jsp?esn=<enter_esn_number_here>
Code:
csmg.lgmobile.com:9002/svc/popup/model_check.jsp?esn=[COLOR=Red]123456789012345[/COLOR]
If it won't work, you can try new link provided by kutysam (make thanks him on some of his post please)
Code:
http://csmg.lgmobile.com:9002/csmg/b2c/client/auth_model_check2.jsp?esn=[COLOR=Red]123456789012345[/COLOR]
6) Show page as source-code view
Code:
<?xml version='1.0' encoding='utf-8' ?>
<response req_cmd='auth_model_check' status='OK'>
<auth_model_check>
<result>OK</result>
<esn>123456789012345</esn>
<model>LGP500</model>
<suffix>ASEABK</suffix>
<msn>000KPPB001234</msn>
<esn_date>20101201</esn_date>
<sw_version>V10E_00</sw_version>
<sw_url>http://csmg.lgmobile.com:9002/swdata/WEBSW/LGP500/ASEABK/V10e_00/V10E_00.kdz</sw_url>
<sw_locale_url>[B]http://csmg.lgmobile.com:9002/swdata/WEBSW/LGP500/ASEABK/V10e_00/V10E_00.kdz[/B]</sw_locale_url>
<sw_recommand_uri>GLOBAL/GLOBAL</sw_recommand_uri>
<app_version></app_version>
<app_url></app_url>
<cs_em_flag>N</cs_em_flag>
<cs_em_uri>N</cs_em_uri>
<chip_type>EG</chip_type>
<prod_type>GSM</prod_type>
</auth_model_check> </response>
Here u will get url for firmware package (~117 mb)
download it on pc .
How To Flash With KDZ
1. Download KDZ updater and uncompress it
http://www.4shared.com/file/UleS4dP3/
KDZ_FW_UPD_EN.html
2. Install msxml.msi from the uncompressed
directory
3. Charge your battery to almost full state (I'm
not sure, but it can be reason if phone
doesn't start)
4. Turn phone off somehow (remove battery
etc.)
5. Install drivers properly
Get rid of all usb drivers like Nokia,
microsoft visual ++ run time environments
Install the LG drivers by selecting the update
manager from the lg site
Disable LGE Virtual Modem. In your Windows
operating system, go to Control Panel >
System > Hardware > Device Manager >
Modems > Right click on LGE Virtual Modem
and click Disable.
6. Enter emergency mode and connect ur device with USB cable to PC.
7. Yellow screen with text emergency mode
should appeared
8.Btw use good quality stock usb cable.
9.run KDZ_FW_UPD.exe (Has administrator).
Select Type : 3GQCT (I have one report that
CDMA mod works too )
Select PhoneMode : DIAG (in case of fail try
EMERGENCY, and as last chance use
CS_EMERGENCY)
10. I Recommend do not switch phone off. There
was some people, which done it and after
they were not be able to turn it on again. If
flashing failed, just select some another
mode and try it again, again, try shake/
connect disconnect, again, again....
11. In KDZ file : Choose the ROM file you
downloaded in the first step
12. Press Launch software update
13. If it fails , try again and again and again till you get success !
14. Make sure that all update was done
successfully. Phone should restart itself
automatically
15. Disconnect the USB cable from the phone
16. Press the three button combo for HW reset
of device i.e volume up + home + power
button
U r done !!!
If you get success , add [SOLVED] as prefix to this thread name.
&
Hit Thanks for @The_ERROR (Original source for KDZ links) @GPadmanabh
Hello all I am a long time listener and first time caller for this forum, this is my first post so I hope this is the place for it
This post will be about recovering your LG G Pro 2 model F350L using the LG flash tool and download mode on the phone.
I used LG Flash tools found here and the universal ADB driver here
First put the phone into download mode by holding the volume up button while inserting a factory cable into the port. In my case a factory kindle fire cable worked for me but your mileage may vary.
Then I ran the LG flash tools with the PhoneMode set to emergency and selecting the appropriate KDZ.
To wipe the phone completely and recover the phone (as I needed to) select CSE flash. I had a DLL file that supposedly accompanies the KDZ file for this, I am no expert on the theory here but I did get it to work for me (Reference Einstein theory v practice) and had the DLL in the same folder as the LG Flash tool .exe. The KDZ I just used from my downloads folder.
So Finally TL;DR version
1. Flash tool+Driver
2. Download mode+Cable
3. CSE Flash + files
4. You're a big kid now
F350L DLL FILE
F350L KDZ FILE
Here are all the current KDZ files for flashing Your LG V10 Back to Stock!
Will Be adding Firmwares as I get them, Give me a little time to fix up the guide a little as it WILL be the SAME method as the G2 and G Pro, G Flex, Etc. KDZ's & TOT's HERE
NOTICE! - IF you download fails or does not download all the way USE A DOWNLOAD MANAGER!, Files that are usually over 1GB browsers have issues downloading them especially if you have a slow connection.
First Off Not Responsible if you flash the wrong one!!!!
_____________________________________________________________________________________________________________________________
LGUP Method flashes both KDZ & TOT files:
Thanks to @shakeyabooti for LGUP!
Download LGUP from HERE
Install the file with the DLL name in them first and then LGUP_Install_Ver_1_14_3 Then copy the folder "common" to C:\Program Files (x86)\LG Electronics\LGUP\model (this should resolve unknown error)
Make sure you have downloaded the required KDZ file MM or LP
Open LGUP on your computer "make sure your phone is plugged in"
ARE YOU HAVING TROUBLE WITH LGUP NOT SEEING YOUR MOBILE?
Try this....... take the back off your mobile so you can get at the battery. Connect your mobile via USB. Start LGUP, if it does not see your phone DO NOT DISCONNECT, DO NOT RESTART OR TURN OFF LGUP. Take out the battery and then put it back in.......let the phone restart on its own. LGUP should now see it.
LG Drivers: All Others - HERE Verizon - HERE
TO DO A FULL WIPE AND INSTALL MM - Open the LGUP on your computer. FILE PATH point it towards the MM KDZ.
IMPORTANT!!!!!!! shut down LGUP!
Now open LGUP again - you will notice that the MM KDZ will still be showing in the FILE PATH section. Select REFURBISH and make sure BIN file is ticked. Press Start. Make cup of tea and be patient
TO GO BACK TO LP FROM MM - Open LGUP on your computer, click on FILE PATH and point it towards your LP KDZ. Close LGUP and re-open LGUP. Make sure you select REFURBISH this will do a FULL wipe, tick BIN file. Press Start. Make cup of tea and be patient
Video Guide: (Thanks to @KiaTheKing
https://www.youtube.com/watch?v=iPKcuYwDoxY
_________________________________________________________________________________________________________________________________________________________________
How to flash ROM KDZ Method
The Files are Hosted on my server for fast speeds! Most if not all NEEDED KDZ files are on my Server
How to flash ROM KDZ Method
First off I`d like to THANK @quangnhut123 for making a new way & easy way to flash the KDZ Method!!
1). Download all The Files Below!
1) Firmware Files - HERE!
2) Download LG Drivers - LG Drivers Here - 10.9 Mb
2.1)Verizon Drivers (Verizon Only)LG_VZW_United_v2.22.0.exe - 7.8 Mb
3) Download LG Flash Tool 2014 tool and extract - LG_Flash_Tool_2014.zip - 3.1 Mb
4) Enter to Download Mode and plug USB into your PC
5) Run LGFlashTool2014.exe and do as following pictures :
(If you cannot run LGFlashTool2014.exe, please install Visual C++ Runtime Library) - Download HERE
Normal Flash: Flash ROM without losing any data. Only use this when you need to fix system error. Beware of boot loop when flashing ROM that differ from current ROM on your phone or MOD ROM.
CSE Flash: Choose this option when you need a fresh format. All data will be gone. It's suitable for upgrading or downgrading ROM or simply use this when you need to back to Stock.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
No need to choose desired language, it automatically change to English as a default setting.
Wait until 100% to complete !
REMEMBER if you get Bootlooping after flashing perform a factory hard reset!
Instructions Here: https://support.t-mobile.com/docs/DOC-7590
_______________________________________________________________________________________________________________________________
2015 (updated with pictures) TOT Method!
RETURN TO STOCK TOT METHOD!, AT&T, T-Mobile, Sprint, Verizon, & a The few International TOT`s that are available
How to Flash YouTube Video:
1. Download Everything!
1.1) Download Both Stock Image & DLL File – Download Here
1.2) Download LG FlashTools V1.8 - Setup_LGFlashTool_1.8.1.1023.exe - 9.3 Mb
1.3) Download Drivers (Any LG Phone) - Here (Verizon Only) – Here
1.4) Megalock DLL File - Megalock.dll Download
Install:
2. Install LG Drviers
3. Install Flashtool (Don’t run it yet)
4. Extract the TOT file from the Zip
5. Copy MegaLock.dll file to C:\LG\LGFlashtool (This might be a hidden folder so enable "hidden folders". Replace the old MegaLock.dll file)
6. Power off your Device & or pull battery (G3),(G Pro),(G Flex)
7. Press and hold the Vol UP Key and plug in the USB cable to your phone you should now see “Firmware Update/Download Mode” and be in Download mode.
8. Open up Device Manger on your PC
8.1) Click on ports and double click LGEModem
8.2) Go to Port Settings Tab and click Advanced
8.3) Change COM Port to COM41 and click Okay.
8.4) After this you may need to rereboot your phone back into download mode.
9. Run LG Flashtool as Administrator
10. Select Manual Mode at the top
11. Click The DLL Box and choose the DLL file from Above meant for your device
12. Click the S/W box and select the firmware file with the .tot extension, Then Click OK when done.
13. Now Click the Yellow Arrow Button at the top left, The Firmware install will be triggered
14. You may need to unplug/replug phone before Firmware install will start (If it does nothing after clicking the yellow button
15. Should take anywhere between 4-8 Minutes, When its done your phone should reboot
16. LG G3 Only, After reboot you will be presented with a Factory reset screen, Just pull battery and put it back in and it should boot right up!
Do NOT Close the FlashTool Window during firmware update.
99% of the time FlashTool will FAIL after 85% anything after 85% is just your phone rebooting so your safe
_______________________________________________________________________________________________________________________________
2014 TOT Method (Old/Outdated)
RETURN TO STOCK TOT Method! AT&T & Sprint Verzion & The Few International TOTs I have available Also T-Mobile Can be Flashed back this way if you are having issues!
Download
1. Download Both Stock Image File & DLL file - Download
2. LGFlashTools v1.8 - Setup_LGFlashTool_1.8.1.1023.exe - 9.3 Mb
3).Download Drivers (ANY LG Phone)- LGUnitedMobileDriverVer_3.8.1.exe - 10.6 Mb
3.2) Download Drivers (Verizon Only) - LG_VZW_United_WHQL_v2.11.1.exe - 7.8 Mb
4.Megalock DLL File: Megalock.dll Download
Credit to @madmack for making most of this Guide for the G Pro Which also works on our G2!
Install:
1. Install the LG drivers downloaded above.
2. Install LGFlashTools v1.8 (but don't run it)
3. Extract the TOT file from the ZIP
When LG Flash Tool is installed, do not launch it.
7) Copy MegaLock.dll to C:\LG\LGFlashTool, This is a hidden folder so enable "hidden folders". Replace the old MegaLock.dll file if you have already installed LG Flash Tool on your computer.
8) When the firmware is downloaded, boot your LG G2 into Download Mode. To do this, press and hold the Volume Up key and then plug the USB cable.
9) Launch LG Flash Tool.
You might see a window with Korean language, just click on OK.
Check the Select Manual Mode on the top.
10) MAKE SURE UNDER, DEVICE MANAGER, YOUR PORT IS SET TO COM 41 FOR YOUR DEVICE.
11) Click the DLL box and choose the dll file from above for you phone model.
12) Click the S/W box and select the firmware file with .tot extension.(the 2.04 gb file from above)
13) Now click the Yellow arrow button on the top left of the main window.
The firmware installation will be triggered.
Ignore if you see any temporary error and just wait patiently till it is finished.
Do not close the Flash Tool window.
14) Press and hold power button until phone turns off, leaving usb cable connected to device AND computer ,immediately hold volume up button until phone boots it into Download Mode.
Your LG G2 will restart showing firmware installation progress in percent (%).
When all is done, reboot your phone and enjoy!
Credit [email protected] for making a cleaner guide for the TOT Method
Click to expand...
Click to collapse
_______________________________________________________________________________________________________________________________
Remember if you have bootloop or stuck on LG Logo after flashing make sure you FACTORY RESET!
Extra Important Info:
To Fix ANY Driver issues make sure you reboot your computer after removing and then re-install again, Also try different USB ports or USB cable or try another PC.
Also try this for any driver issues: http://forum.xda-developers.com/showpost.php?p=53313255&postcount=5400
REMEMBER if you get Bootlooping after flashing perform a factory hard reset!
Instructions Here: https://support.t-mobile.com/docs/DOC-7590
My Links are ALWAYS hosted on MY servers for NO Downtime! If My site does NOT have what your looking for PM me or post what you want and I will try and get it for you
Feel Free to support me by helping with Server Costs, Late night Beer, and Coffee if you feel my work has helped you Thank you!
Thank you so much!
Donations: @avinash Rajkumar, @penone1130, @nilesd
Thread now opened!
hyelton said:
Thread now opened!
Click to expand...
Click to collapse
You mean you found the firmware files for the H901?
NYLimited said:
You mean you found the firmware files for the H901?
Click to expand...
Click to collapse
Not for that one yet. :/. Just some other models
Sent from my iPhone using Tapatalk
hyelton said:
Not for that one yet. :/. Just some other models
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Hi,
I bought my V10 at expansys australia, and the version is H961N Dual Sim,
but the software version is v10b-SEA-XX instead of v10b-HKG_XX, I believe it is a singapore version.
Any one has the v10b-SEA-XX kdz file?
or
Is that compatible to flash v10c-HKG-XX on my Singapore version of V10???
These .KDZ files look to come from the LG site although I have not been able to verify them or test flashing them yet.
http://forum.xda-developers.com/showthread.php?p=65742064
[Guide] LG V10 Stock Firmware (Go Back to Stock) KDZ & TOT Method
burnsky05 said:
These .KDZ files look to come from the LG site although I have not been able to verify them or test flashing them yet.
http://forum.xda-developers.com/showthread.php?p=65742064
Click to expand...
Click to collapse
All my kdz files come from LGs site that are on all my guides. I also have KDZs that are no longer available as well for other models.
Sent from my iPhone using Tapatalk
Maybe some more updated .KDZ files being release
http://forum.xda-developers.com/showthread.php?p=65768787
burnsky05 said:
Maybe some more updated .KDZ files being release
http://forum.xda-developers.com/showthread.php?p=65768787
Click to expand...
Click to collapse
Thanks, I've been keeping watching and uploading as I get them !
hyelton said:
Not for that one yet. :/. Just some other models
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
I don't understand.. This thread is, according to the title, for LG v10...
NYLimited said:
I don't understand.. This thread is, according to the title, for LG v10...
Click to expand...
Click to collapse
Yes, Remember there are close to 10 different models for the V10. There are more than just the T-Mobile H901 V10
Hey guys what's the odds on the Verizon v10 getting at least root?
Sent from my VS990 using Tapatalk
mwebb34 said:
Hey guys what's the odds on the Verizon v10 getting at least root?
Sent from my VS990 using Tapatalk
Click to expand...
Click to collapse
Go to this thread
http://forum.xda-developers.com/showthread.php?t=3244237
Thanks
Sent from my VS990 using Tapatalk
Is it possible to install a different kdz on an identical spec phone?
I have h960a, can I install the new Turkish mm 6.0 kdz?
Keep in mind that Tr version is 64gb.
Is there kdz for H960A 32gb ?
Is this confirmed working for the VS990?
hi folks,
i ve been trying the kdz for my f660k, everything goes fine, except after the location and language window, it check phone settings, and after i get a message saying it cannot connect to the server, and nothing get installed on the phone.
any work around?
if you have a tip for help i would appreciate.
thxx a lot
[Guide] LG V10 Stock Firmware (Go Back to Stock) KDZ & TOT Method
nocomp said:
hi folks,
i ve been trying the kdz for my f660k, everything goes fine, except after the location and language window, it check phone settings, and after i get a message saying it cannot connect to the server, and nothing get installed on the phone.
any work around?
if you have a tip for help i would appreciate.
thxx a lot
Click to expand...
Click to collapse
Did you drag that window over?? That's normal. That message is supposed to come up.. In most cases when you drag it over you'll see it's actually flashing. It says that because there's not as it's not needed. But you should be using LGUP not the older flash tool
Sent from my iPhone using Tapatalk
How To Flash Idea Alcatel One Touch 5036D done by Smart Phone Help
flash tool https://spflashtools.com/windows/sp-flash-tool-v5-1812
Firmware 1: http://infopade.com/4sSA
Password: touch
if the above firmware doesn't work for you, try this
Firmware 2: http://infopade.com/4sWN
Password - Gsmtel.in
like video: https://youtu.be/lwN-BLvenEo
Thanks for watching, & please remember to Like this video, if it helped you. I will answer all comments below,
Be sure to share with your friends. !!
Please Reply Me For More Future Videos !!
Once Again, Thanks For Watching Subscribe for more future videos
Steps:
- Step 1: Download and Install the android USB drivers on your computer. In case you have already installed them, you can skip this step.
Step 2: Switch off you Android Phone .
Step 3: Now download the stock ROM or the custom ROM which you want to install on your phone. After downloading, extract the zip file on you system.
Step 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed.
Step 5: Form the files listed run the Flash_tool.exe file.
Step 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side.
Step 7: Now locate the scatter file in your custom or stock ROM. It is generally located in the bin/directory.
Step 8: Now click the Download button to start the downloading process.
Step 9: After completed all the above steps, connect your smart phone to your system using the USB cable and press any button other than power button so that your system will detect your device. You can use volume buttons.
Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your device and switch it ON.
Requirements:- Your phone must have atleast 40-50% of battery and USB Drivers