I currently have Galaxy S6 G920FD. I prevously I am on 5.0.2 with CSC:GLB (Countryhilippines, Network:Globe). I successfuly flashed the French 5.1.1 ROM. Now I flashed back to my native Globe 5.1.1. Problem is the CSC is Thailand and not Globe. How do I change the CSC without root? Tried going to Recovery mode doing full cache wipe and full reset but still it sets the Thailand CSC. Thank you very much.
roydok said:
I currently have Galaxy S6 G920FD. I prevously I am on 5.0.2 with CSC:GLB (Countryhilippines, Network:Globe). I successfuly flashed the French 5.1.1 ROM. Now I flashed back to my native Globe 5.1.1. Problem is the CSC is Thailand and not Globe. How do I change the CSC without root? Tried going to Recovery mode doing full cache wipe and full reset but still it sets the Thailand CSC. Thank you very much.
Click to expand...
Click to collapse
hello there. just would like to revive your thread as am exactly in the same situation now..
glb->xfe->glb, wipe/full reset with each flash, but csc is now stuck at thl..
how's your s6 duos now? what did you do? tia
no-one has info on this?
Related
Hi everyone,
Before when I was still on 5.0.2 and I could not wait for 5.1.1, I updated my S6 to 5.1.1 flashing the french firmware using odin.
Because now the Belgium 5.1.1 was available on sammobile I decided to flash the Belgium firmware.
Now I have 2 CSC codes the French and the Belgium one, I expected it to be that way because I did not know how to totally wipe my phone without a custom recovery.
So my question is, how do I flash a stock firmware with odin without ending up with 2 CSC codes?
You'll have to factory reset and reboot to fix it.
That was the first thing I did.
Sn0w0nS said:
That was the first thing I did.
Click to expand...
Click to collapse
I had the same issue, factory reset and clearing cache fixed it.
Ok, I wil try that tommorow. Thanks.
Thank you! It is fixed.
Hi guys. .
I have just debranded my galaxy s6 flat. From O2 to the latest original 5.1.1 UK btu. My question is, is it absolutely necessary to do a factory reset? . Also will i require a factory reset to change my csc from O2U to BTU.? As my csc still says O2U...im unsure.
Thanks guy's. ..
pacman2009 said:
Hi guys. .
I have just debranded my galaxy s6 flat. From O2 to the latest original 5.1.1 UK btu. My question is, is it absolutely necessary to do a factory reset? . Also will i require a factory reset to change my csc from O2U to BTU.? As my csc still says O2U...im unsure.
Thanks guy's. ..
Click to expand...
Click to collapse
Yes you need a factory reset ...
Thank you lummujaj...
Hello everyone.
I have a problem after changing software.
The factory software my phone was 5.1.1 Italy (vodafon) OMN, I decided to upgrade to version 5.1.1 BTU, so far so good.
But when I want to go back to the 5.1.1 Italy (Vodafone) the CSC Country was changed to SIM/Slovenia.
What should I do to change in Italy/OMN, What software should you download from sammobile?
Flash Italy firmware and do a hard reset
sokratisk91 said:
Hello everyone.
I have a problem after changing software.
The factory software my phone was 5.1.1 Italy (vodafon) OMN, I decided to upgrade to version 5.1.1 BTU, so far so good.
But when I want to go back to the 5.1.1 Italy (Vodafone) the CSC Country was changed to SIM/Slovenia.
What should I do to change in Italy/OMN, What software should you download from sammobile?
Click to expand...
Click to collapse
I write you a Private Message! Use Smart Switch
Hi,
The CSC doesn't matter regarding the system itself, it's just the "location" of your device. If you want to have the Italy CSC back though, just flash a firmware from Italy, just like you did with the BTU. I think you can find it in the SamMobile website.
I don't believe that using Smart Switch/Kies will solve your problem, since I believe it'll flash back the stock from your current CSC, which is SIM/Slovenia right?
All the best,
~Lord
Sent from my SM-G920I using Tapatalk
XxLordxX said:
Hi,
The CSC doesn't matter regarding the system itself, it's just the "location" of your device. If you want to have the Italy CSC back though, just flash a firmware from Italy, just like you did with the BTU. I think you can find it in the SamMobile website.
I don't believe that using Smart Switch/Kies will solve your problem, since I believe it'll flash back the stock from your current CSC, which is SIM/Slovenia right?
All the best,
~Lord
Sent from my SM-G920I using Tapatalk
Click to expand...
Click to collapse
Again I tried to pass the Italian rom 5.1.1 Vodafone OMN but remains csc SIM / Slovenia.
I installed via odin version 6.0.1 Italian OMN but remains csc SIM / Slovenia.
What else should I do;
I always do before and after the installation, factory data reset,
sokratisk91 said:
Again I tried to pass the Italian rom 5.1.1 Vodafone OMN but remains csc SIM / Slovenia.
I installed via odin version 6.0.1 Italian OMN but remains csc SIM / Slovenia.
What else should I do;
I always do before and after the installation, factory data reset,
Click to expand...
Click to collapse
Hi,
Sorry, I didn't understand your problem at first . I have searched and came across this thread: http://forum.xda-developers.com/galaxy-s6-edge/help/change-csc-to-btu-to-vod-flash-stock-t3275067. Please let me know if the problem was solved.
All the best,
~Lord
Sent from my SM-G920I using Tapatalk
Hi Guys,
I have N915G it was on BRI csc 5.1.1 that is taiwan as I am more accustomed to english environment and international keyboard and apps etc i decided to install XSA csc ROM (Australia ) 5.1.1
I did install it many times troubleshooting here and there till i found the right odin after I installed the active csc was still bri then i installed again performing a complete wipe and even selected XSA .pit file for N915g
So now in recovery its shows XSA csc but phone reboots randomly not too often but sometimes ,not sure about the cause though can it be some app or the csc thing?
and also in the end of my imei before it was /01 now is /08 rest of imei is intact what's the /0* part for?
Thanks in Advance please help a brother out peace!
Sent from my SM-N915G using Tapatalk
hello mate,
i also have an sm n915g bri on 5.1.1 i have cwm recovery installed....but cant figure out how to root.....after multiple bricks and unbricks im almost giving up.....can you help?
thanks
lenny
[email protected] said:
hello mate,
i also have an sm n915g bri on 5.1.1 i have cwm recovery installed....but cant figure out how to root.....after multiple bricks and unbricks im almost giving up.....can you help?
thanks
lenny
Click to expand...
Click to collapse
I send you PM maybe i can help you
Thanks for your speedy reply....I have TWRP recovery installed....was able to achieve root on 5.1.1.....now I want to upgrade to MM 6.0.1 or the highest I can get on my note edge....where do I get the correct firmware to flash from....I'm sm n915g...thanks
Help guys I recently downloaded s7 nougat Beta but I flashed the UK CSC and now I can't use SPay. I was orignally on a Singapore CSC but now when I roll back to MM, my CSC stays at Thailand . I know it's a multi CSC issue, is there anyway I can use Samsung pay again? I'm not rooted and never tripped Knox. Or do I have to send it to the Samsung service centre to fix it? i need my to have samsung pay SG again . is there anyway at all to have a singapore CSC again? i tried smartswitch and it did not work.
Have you tried "emergency software recovery and initialisation" through smart switch?
Sent from my SM-G930F using Tapatalk
omrij said:
Have you tried "emergency software recovery and initialisation" through smart switch?
Sent from my SM-G930F using Tapatalk
Click to expand...
Click to collapse
Yes i tried. i keyed in my imei and my serial number and still no change. my active csc is still THL. can anybody please help me whether i can change active csc to SIN(singapore) without rooting?
scarletwitches said:
Help guys I recently downloaded s7 nougat Beta but I flashed the UK CSC and now I can't use SPay. I was orignally on a Singapore CSC but now when I roll back to MM, my CSC stays at Thailand . I know it's a multi CSC issue, is there anyway I can use Samsung pay again? I'm not rooted and never tripped Knox. Or do I have to send it to the Samsung service centre to fix it? i need my to have samsung pay SG again . is there anyway at all to have a singapore CSC again? i tried smartswitch and it did not work.
Click to expand...
Click to collapse
Hi mate
That is not that ease because of the multi csc firmwares read here
What phone do you have?
Try flashing android n fw and add singapore csc.
I hp was sg also XD waiting for public release
you should be able to change the CSC by booting into recovery and doing a factory reset this will set it to the default rom's csc.