Related
Hi all,
I am generally not a XDA active reply user. I worked on a lot of Android fixing project. And here is one of mine result.
Please read the whole thread before working on it.
I know everyone is frustrating in upgrading to 4.4.2 but brick during odin process (ext4 fail) and stuck in 4.4.2 bootloader.
PS: This method is currently work on HK note3, but i think this method would work on all note3, Please try this will your own risk, I would not be responsible to all trouble according to this method. Varied N9005 would require different N9005 4.3 Firmware, I personally use HK Firmware because Mine is 16gb Note 3.
Here is the method to solve this problem:
Before working on it, we have to prepare the following things:
1. Odin 3.07 (Yes, 3.09 does not work)
2. HK firmware odin pack (Pit, BL (DO NOT WORK WITH IT, AP, CP, CSC) (Sorry for it is a Chinese link)
OR Workable N9005 4.3 firmware
3. 4.4.2 leaked firmware
4. 4.4.2 rom (I used sweet rom v.7 to fix it)
5. 4.4.2 recovery cwm @Chenglu
5. Samsung driver (bullshxt)
Now lets get started:
1. Flash the 4.4.2 firmware BL by odin.
2. Flash the HK Firmware AP, CP &CSC (Do not use the HK firmware BL)
3. once it done, turn to Download mode again and flash 4.4.2 recovery cwm by odin
4. Run Recovery
5. Wipe everything
6. Flash 4.4.2 rom ( I flashed sweet rom v7 currently)
7. Boot to system and do all the setting ( The sound and the signal are not working)
8. Boot back to download mode
9. Boot the 4.4.2 leaked firmware's CP ( DO NOT WIPE AFTERWARD)
10. Prepare coffee and cookies
11. Enjoy your device!
karnavont said:
Hi all,
...
Click to expand...
Click to collapse
Please edit your title to reflect that (at least at this point) your fix should be considered primarily for the Hong Kong Note 3 bricked by writing XEO 4.4.2.
xclub_101 said:
Please edit your title to reflect that (at least at this point) your fix should be considered primarily for the Hong Kong Note 3 bricked by writing XEO 4.4.2.
Click to expand...
Click to collapse
Actually not, its to all varied Note3 but I do not have all sources given to it, it is generally working on all Note3 who fail in flashing to 4.4.2(to any error in progress during Odin upgrading)
And I did a lot of researches, This problem is not only reflect to HK Note 3 only, there are a lot of people would upgrading to 4.4.2 and stuck in Download mode with UDC start (Not able to downgrade).
karnavont said:
Actually not, its to all varied Note3 but I do not have all sources given to it, it is generally working on all Note3 who fail in flashing to 4.4.2(to any error in progress during Odin upgrading)
And I did a lot of researches, This problem is not only reflect to HK Note 3 only, there are a lot of people would upgrading to 4.4.2 and stuck in Download mode with UDC start (Not able to downgrade).
Click to expand...
Click to collapse
Well, if/when people will post in this thread reporting that the method (which is highly similar to methods that were already posted by other users, most notably Volrath and rinuvimal - which you have not credited anywhere) - then we will know that the method is applicable, and to which specific models!
In other words people using the method on untested models should be warned that they are just doing something that might have never been tested on their model.
xclub_101 said:
Well, if/when people will post in this thread reporting that the method (which is highly similar to methods that were already posted by other users, most notably Volrath and rinuvimal - which you have not credited anywhere) - then we will know that the method is applicable, and to which specific models!
In other words people using the method on untested models should be warned that they are just doing something that might have never been tested on their model.
Click to expand...
Click to collapse
Okay, i changed it, in term of a reference instead
Hi guys, I had the same issue with the 16GB Honk Kong version, and this is how I have finally resolved, trying the methods you suggested and others, and finally got it back to life this way (I'm posting in case this might be useful for any of you as well)
1.- Flash bootloader from N9005XXUENA6_N9005OXXENA5_N9005XXUENA2_OXX (Leaked Kit Kat version)
2.- After reboot, flash bootloader, CP and CSC from the same version (N9005XXUENA6_N9005OXXENA5_N9005XXUENA2_OXX). Flashing bootloader again might not be necessary, but this is how I did it, and how it worked, so I cannot confirm otherwise
3.- Flash AP from N9005ZHUBMI7 (Honk Kong version)
4.- Enter recovery mode and wiped system, cache and dalvik (just in case)
4.- Flash autoroot (n9005-cwm-recovery-6.0.4.6-kitkat(0113).tar)
5.- Flash CWM recovery for KitKat (n9005-cwm-recovery-6.0.4.6-kitkat(0113).tar)
6.- Installed the latest version of SweetRom (SweetROM_V7.00_NA6_4.4.2_N9005.zip) from this thread: http://forum.xda-developers.com/show....php?t=2487425
So long it seems to be working correctly, battery consumption has increased, but this seems normal every time I change my ROM. Thanks again for all your help, and hopefully this will help someone else resolve the issue until the official version for the HK 16GB version is available.
My friend wants to ask this question because he is unable to post a reply with a photos attached.
Is my N9005 32gb Baseband/Bootloader from Hong Kong also?
Kindly see my ScreenShots beloe please. I just don't know where my Note 3 came from.
Thanks in Advance & God Bless
AldrichDSaints said:
My friend wants to ask this question because he is unable to post a reply with a photos attached.
Is my N9005 32gb Baseband/Bootloader from Hong Kong also?
Kindly see my ScreenShots beloe please. I just don't know where my Note 3 came from.
Thanks in Advance & God Bless
Click to expand...
Click to collapse
I think you are using a Custom Rom so there is a posibility it won't be accurate kabayan. But according to your bootloader and baseband its the same as my Hongkong version. And my advice hide your IMEI nexttime.
maumarti2k said:
Hi guys, I had the same issue with the 16GB Honk Kong version, and this is how I have finally resolved, trying the methods you suggested and others, and finally got it back to life this way (I'm posting in case this might be useful for any of you as well)
1.- Flash bootloader from N9005XXUENA6_N9005OXXENA5_N9005XXUENA2_OXX (Leaked Kit Kat version)
2.- After reboot, flash bootloader, CP and CSC from the same version (N9005XXUENA6_N9005OXXENA5_N9005XXUENA2_OXX). Flashing bootloader again might not be necessary, but this is how I did it, and how it worked, so I cannot confirm otherwise
3.- Flash AP from N9005ZHUBMI7 (Honk Kong version)
4.- Enter recovery mode and wiped system, cache and dalvik (just in case)
4.- Flash autoroot (n9005-cwm-recovery-6.0.4.6-kitkat(0113).tar)
5.- Flash CWM recovery for KitKat (n9005-cwm-recovery-6.0.4.6-kitkat(0113).tar)
6.- Installed the latest version of SweetRom (SweetROM_V7.00_NA6_4.4.2_N9005.zip) from this thread: http://forum.xda-developers.com/show....php?t=2487425
So long it seems to be working correctly, battery consumption has increased, but this seems normal every time I change my ROM. Thanks again for all your help, and hopefully this will help someone else resolve the issue until the official version for the HK 16GB version is available.
Click to expand...
Click to collapse
What version of Odin did you used? For the past 24 hours is it stable and any FC's? Are all apps working? I wanna try your guide. Having problem on the O.P. guides.
I am in the exact same situation, all over methods have failed, im going to try this!
3. 4.4.2 leaked firmware is a dead link!
AldrichDSaints said:
My friend wants to ask this question because he is unable to post a reply with a photos attached.
Is my N9005 32gb Baseband/Bootloader from Hong Kong also?
Kindly see my ScreenShots beloe please. I just don't know where my Note 3 came from.
Thanks in Advance & God Bless
Click to expand...
Click to collapse
Fist dude you should never post your IEM EVERRRR
Second you can always hook the phone to Kies and it will tell you what you have
jetbruceli said:
Fist dude you should never post your IEM EVERRRR
Second you can always hook the phone to Kies and it will tell you what you have
Click to expand...
Click to collapse
Seems I have had some success. Although, I found a couple of the instructions difficult to understand. Thanks for posting this, as I no longer have a brick.
Cheers.
filchi756 said:
I think you are using a Custom Rom so there is a posibility it won't be accurate kabayan. But according to your bootloader and baseband its the same as my Hongkong version. And my advice hide your IMEI nexttime.
Click to expand...
Click to collapse
My friend didn't continue to flash the Poland's leak. He will just wait for the OTA on his phone because he is afraid to have a softbrick and I told him also that if he had softbrick his phone the only thing that he can use now is by flashing custom ROM
Samsung Note 3 Region Taiwan Softbrick UDC START
AldrichDSaints said:
My friend didn't continue to flash the Poland's leak. He will just wait for the OTA on his phone because he is afraid to have a softbrick and I told him also that if he had softbrick his phone the only thing that he can use now is by flashing custom ROM
Click to expand...
Click to collapse
does anyone with Samsung Note 3 Taiwan Region?
i got this "UDC START" thing while upgrade to 4.4.2 Region Poland Official ROM
but i dont want to trip knox, better i got back to shop and claim for warranty..
or should i just wait for Official Kit Kat Region Taiwan?
i am still waiting..
if anyone can help, thank you very much.
Samsung Note 3 Region Taiwan Softbrick UDC START
karnavont said:
Actually not, its to all varied Note3 but I do not have all sources given to it, it is generally working on all Note3 who fail in flashing to 4.4.2(to any error in progress during Odin upgrading)
And I did a lot of researches, This problem is not only reflect to HK Note 3 only, there are a lot of people would upgrading to 4.4.2 and stuck in Download mode with UDC start (Not able to downgrade).
Click to expand...
Click to collapse
does anyone with Samsung Note 3 Taiwan Region?
i got this "UDC START" thing while upgrade to 4.4.2 Region Poland Official ROM
but i dont want to trip knox, better i got back to shop and claim for warranty..
or should i just wait for Official Kit Kat Region Taiwan?
i am still waiting..
if anyone can help, thank you very much.
budi_west said:
does anyone with Samsung Note 3 Taiwan Region?
i got this "UDC START" thing while upgrade to 4.4.2 Region Poland Official ROM
but i dont want to trip knox, better i got back to shop and claim for warranty..
or should i just wait for Official Kit Kat Region Taiwan?
i am still waiting..
if anyone can help, thank you very much.
Click to expand...
Click to collapse
i also have the same problem. what should i do
Samsung note 3 Region Taiwan UDC START
sagsans said:
i also have the same problem. what should i do
Click to expand...
Click to collapse
Where do you come from?
i will try the solution given by members from Hongkong Region with flashing CWM recovery and SweetROM, but i just do not know will it work for Taiwan Region, cause Hongkong Firmware is ZHU and Taiwan is ZTU something unique there..
budi_west said:
Where do you come from?
i will try the solution given by members from Hongkong Region with flashing CWM recovery and SweetROM, but i just do not know will it work for Taiwan Region, cause Hongkong Firmware is ZHU and Taiwan is ZTU something unique there..
Click to expand...
Click to collapse
i have try sweetrom, it's not working on my note3 taiwan version. anything for me to try?
Samsung Note 3 Taiwan UDC START
sagsans said:
i have try sweetrom, it's not working on my note3 taiwan version. anything for me to try?
Click to expand...
Click to collapse
How do you flash the SweetROM what version? have you try locky guide?
Technology: The Ultimate Guide To Unbrick 16 Gb International Samsung Galaxy Note 3
http://forum.xda-developers.com/showthread.php?t=2627291
by: Locky Loki
Try this something else out
[ROM]N9005ZHUENB1 Android 4.4.2 Kitkat
http://forum.xda-developers.com/showthread.php?t=2636699
Or
[SOLUTION] Successful flash of leaked NA6 ROM on Hong Kong 32g N9005
http://forum.xda-developers.com/showthread.php?t=2613374
Actually i have started a question [Q] about Note 3 Taiwan UDC START at this forum but with no reply
[Q] Samsung Galaxy Note 3 SM-N9005 Region Taiwan Softbrick UDC START
http://forum.xda-developers.com/showthread.php?p=50061661
Lately i found out somebody posting That he is from Region taiwan anda he is able to flash firmware from region Hongkong and Taiwan Only..
So, i suppose Taiwan Region can seek help from Hongkong Region
I currently have Galaxy S6 G920FD. I prevously I am on 5.0.2 with CSC:GLB (Countryhilippines, Network:Globe). I successfuly flashed the French 5.1.1 ROM. Now I flashed back to my native Globe 5.1.1. Problem is the CSC is Thailand and not Globe. How do I change the CSC without root? Tried going to Recovery mode doing full cache wipe and full reset but still it sets the Thailand CSC. Thank you very much.
roydok said:
I currently have Galaxy S6 G920FD. I prevously I am on 5.0.2 with CSC:GLB (Countryhilippines, Network:Globe). I successfuly flashed the French 5.1.1 ROM. Now I flashed back to my native Globe 5.1.1. Problem is the CSC is Thailand and not Globe. How do I change the CSC without root? Tried going to Recovery mode doing full cache wipe and full reset but still it sets the Thailand CSC. Thank you very much.
Click to expand...
Click to collapse
hello there. just would like to revive your thread as am exactly in the same situation now..
glb->xfe->glb, wipe/full reset with each flash, but csc is now stuck at thl..
how's your s6 duos now? what did you do? tia
no-one has info on this?
I bought my S6 in Colombia although I live in Panama. It is the SM-G920I.
I found that a Panama app I wanted to install would not install because it said the country was wrong. I guess that may be something to do with the CSC. I had naively assumed the phones in Colombia would be the same as the phones available in Panama. I now see from Sammobile that there are different firmwares for Colombia and Panama. So I downloaded the Panama firmware and installed it with Odin. Odin did its stuff and said that the installation was successful. Both firmwares are 5.0.2.
However, when the phone rebooted it was exactly the same as before and PhoneInfo still shows it as having the Colombian firmware. The only change was that I lost my Pingpong root.
Sorry for the long explanation but what have I done wrong? How can I get the Panama firmware on the phone?
TIA
norm
norm2002 said:
I bought my S6 in Colombia although I live in Panama. It is the SM-G920I.
I found that a Panama app I wanted to install would not install because it said the country was wrong. I guess that may be something to do with the CSC. I had naively assumed the phones in Colombia would be the same as the phones available in Panama. I now see from Sammobile that there are different firmwares for Colombia and Panama. So I downloaded the Panama firmware and installed it with Odin. Odin did its stuff and said that the installation was successful. Both firmwares are 5.0.2.
However, when the phone rebooted it was exactly the same as before and PhoneInfo still shows it as having the Colombian firmware. The only change was that I lost my Pingpong root.
Sorry for the long explanation but what have I done wrong? How can I get the Panama firmware on the phone?
TIA
norm
Click to expand...
Click to collapse
You Need to download another firmware, i recommend to you to download the Trinidad And Tobago firmware, i tell you because latin america has csc codes for many countries but if your country does not have csc code it sets to latin american firmware because of your EFS Folder, if it doesnt work to you please download a firmware from France or Spain. if you doesnt want to lose pingpong root do not upgrade to a kernel made after 15 May 2015
Please do not upgrate to 5.1.1 Firmware it Sucks
kmiloxdxd said:
You Need to download another firmware, i recommend to you to download the Trinidad And Tobago firmware, i tell you because latin america has csc codes for many countries but if your country does not have csc code it sets to latin american firmware because of your EFS Folder, if it doesnt work to you please download a firmware from France or Spain. if you doesnt want to lose pingpong root do not upgrade to a kernel made after 15 May 2015
Please do not upgrate to 5.1.1 Firmware it Sucks
Click to expand...
Click to collapse
Thanks. I will give that a try. Would it be the CSC that is stopping the app I want from installing, saying it is the wrong country?
If so, is there an easier why just to change the CSC? I have done some searching but everything I've found seems to be quite old and probably not working for Lollipop.
norm2002 said:
Thanks. I will give that a try. Would it be the CSC that is stopping the app I want from installing, saying it is the wrong country?
If so, is there an easier why just to change the CSC? I have done some searching but everything I've found seems to be quite old and probably not working for Lollipop.
Click to expand...
Click to collapse
Try this to change your csc code:
1. type in the dialer *#06#, copy ur IMEI
2. type in the dialer *#272*IMEI HERE and add a #
IT WILL WIPE YOUR DATA
kmiloxdxd said:
Try this to change your csc code:
1. type in the dialer *#06#, copy ur IMEI
2. type in the dialer *#272*IMEI HERE and add a #
IT WILL WIPE YOUR DATA
Click to expand...
Click to collapse
Thanks but that doesn't work. I get Unknown Application. I think that doesn't work on the S6. I also tried using Phone Info to change the CSC but that also doesn't seem to be compatible with the S6 even though it shows my firmware is multi-CSC.
norm2002 said:
thanks but that doesn't work. I get unknown application. I think that doesn't work on the s6. I also tried using phone info to change the csc but that also doesn't seem to be compatible with the s6 even though it shows my firmware is multi-csc.
Click to expand...
Click to collapse
enter in recovery mode after flash in odin do not let to install csc files, it worked for me
kmiloxdxd said:
enter in recovery mode after flash in odin do not let to install csc files, it worked for me
Click to expand...
Click to collapse
Sorry but what do you mean do not let to install csc files? I did stop Odin auto-rebooting and went to recovery but that didn't seem to help. How do I stop it installing the wrong CSC files?
If I was willing to lose warranty now, would installing TWRP and maybe a custom ROM make it easier to change the CSC?
Thanks.
norm2002 said:
Sorry but what do you mean do not let to install csc files? I did stop Odin auto-rebooting and went to recovery but that didn't seem to help. How do I stop it installing the wrong CSC files?
If I was willing to lose warranty now, would installing TWRP and maybe a custom ROM make it easier to change the CSC?
Thanks.
Click to expand...
Click to collapse
I am stuck in BNG csc code and i cant change it because i need to Trip KNOX, but i changed my csc code From ING to BNG.
- When odin finish flashing if Auto-Reboot option is ticked, your samsung will reboot and it shows a Android robot instaling something and later says Erasing... you cant let this happen, untick auto reboot and you need to reboot your galaxy in recovery mode and it will show CSC Check Failed and you have to wipe data and shutdown your device and enter in download mode and reflash the firmware.It worked for me.
if you trip knox and you install twrp it will be easier because you can install a custom rom and change your csc code rooted.
kmiloxdxd said:
I am stuck in BNG csc code and i cant change it because i need to Trip KNOX, but i changed my csc code From ING to BNG.
- When odin finish flashing if Auto-Reboot option is ticked, your samsung will reboot and it shows a Android robot instaling something and later says Erasing... you cant let this happen, untick auto reboot and you need to reboot your galaxy in recovery mode and it will show CSC Check Failed and you have to wipe data and shutdown your device and enter in download mode and reflash the firmware.It worked for me.
if you trip knox and you install twrp it will be easier because you can install a custom rom and change your csc code rooted.
Click to expand...
Click to collapse
Thanks for all the advice. I am away for a few days so cannot risk reflashing my phone until I get back home. Will try again then.
I saw that android 6.0 was avaible for G920F and i have a G920I,since they have the same hardware i was wondering if it is possible to install the G920F firmware on a G920I
victor1342 said:
I saw that android 6.0 was avaible for G920F and i have a G920I,since they have the same hardware i was wondering if it is possible to install the G920F firmware on a G920I
Click to expand...
Click to collapse
Pertty sure u cant cuz the bootloader and modem are unique to ur device and without a 6.0.1 bootloader for your device it will just bootloop
xstokerx said:
Pertty sure u cant cuz the bootloader and modem are unique to ur device and without a 6.0.1 bootloader for your device it will just bootloop
Click to expand...
Click to collapse
But can't i install the G920F 6.0.1 bootloader in the G920I?
victor1342 said:
But can't i install the G920F 6.0.1 bootloader in the G920I?
Click to expand...
Click to collapse
I know you can't wait to try marshmallow on the i variant. The marshmallow bootloader and modem are meant for F variant. Best wait for unifed S6 rom or official I variant marshmallow.
Loving 14nm Exynos
defybest said:
I know you can't wait to try marshmallow on the i variant. The marshmallow bootloader and modem are meant for F variant. Best wait for unifed S6 rom or official I variant marshmallow.
Loving 14nm Exynos
Click to expand...
Click to collapse
Ok,thx for the help
well i did the opposit, instaled the 920f on my 920i and it works perfectly
tntgdh said:
well i did the opposit, instaled the 920f on my 920i and it works perfectly
Click to expand...
Click to collapse
You installed G920F firmware on G920i and it worked? Which android version ?
Yeah. And I'm using it right now. 5.1.1
The latest one from mexico
tntgdh said:
Yeah. And I'm using it right now. 5.1.1
The latest one from mexico
Click to expand...
Click to collapse
Can you try 920F VOD firmware and confirm if it is working?
I also have 920I and cant wait to get my hands on MM
Dude I was about to install it but gave up when I realized that would have to use a pit file. I don't want to end up with a locked bootloader if any problem happens
tntgdh said:
Dude I was about to install it but gave up when I realized that would have to use a pit file. I don't want to end up with a locked bootloader if any problem happens
Click to expand...
Click to collapse
Can you try XEF (France) Firmware ? I think it is de-branded!
victor1342 said:
I saw that android 6.0 was avaible for G920F and i have a G920I,since they have the same hardware i was wondering if it is possible to install the G920F firmware on a G920I
Click to expand...
Click to collapse
things should happen if you flash incorrect ROM
1 BOOTLOOPS
2 your phone can go down anytime this is if flash pass
3 loosing imei
4 giving you errors during flashing stock
4 KNOX bye bye
5 a nice piece of junk between your hands to smile at it and you know you are screwed because this junk loose signal every Minute
6 every time you see your phone its Like someone saying to you ( hello retard )
and this is my story
am done with samsung moving to moto or nexus or sony
tntgdh said:
Dude I was about to install it but gave up when I realized that would have to use a pit file. I don't want to end up with a locked bootloader if any problem happens
Click to expand...
Click to collapse
are you on 920F VOD? or locked to any carrier?
if not locked, you can flash the unlocked versions of MM 920F, as I dont think you need pit files as some guys have flashed 920F MM over 920F 5.1.1 without pit.
Tried several times with ODIN. Fails everytime. Lost my phone data as well while trying when I formatted everything without a backup. I am a Certified retard!
Ok so myself and also some other people on the Australia post have tried to flash the G920F MM firmware (VOD or XEF) on a G920i and it has never worked - coming from a Custom 5.1.1 Rom or an official 5.1.1.
Odin simply refused to flash the firmware so you actually don't lose any data and don't damage your phone.
massacreur75010 said:
Ok so myself and also some other people on the Australia post have tried to flash the G920F MM firmware (VOD or XEF) on a G920i and it has never worked - coming from a Custom 5.1.1 Rom or an official 5.1.1.
Odin simply refused to flash the firmware so you actually don't lose any data and don't damage your phone.
Click to expand...
Click to collapse
Hi
Have your firends and you tried to convert your G920i 5.1.1 to a G920f 5.1.1 first, before trying to update to MM?
I ask because one user up in the thread said that he had successfully flash a Mexico G920f 5.1.1 firmaware to his G920i 5.1.1 phone.... but he did not flash with MM, because he was scared of flashing a pit file...
Thanks!
G920I
I have a Galaxy S6 , G920I model for the other models, or at least for the G920F , the marshmallow was released, how do you have the new update in my G920i ? Who can help me thank you.
Dear readers,
I want to have voLTE working on my SM-G920F.
I live in the netherlands (PHN) and my carrier supports volTE , in fact I have it working with android 6.0.1.
Is it possible to flash to BTU (UK, 7.0.1) with the CSC package from the PHN (6.0.1) or will this cause a (soft) brick?
So I would flash the following with ODIN:
BL: BL_G920FXXU5DQA7_CL8821257_QB12271362_REV02_user_low_ship.tar.md5
CP: CP_G920FXXU5DPL3_CL8821257_QB11771442_REV02_user_low_ship.tar.md5
AP: AP_G920FXXU5DQA7_CL8821257_QB12271362_REV02_user_low_ship.tar.md5
CSC: MODEM_G920FXXU5DPLD_CL2100313_QB_5298122_SIGNED.tar.md5 - (This one is extracted from the PHN firmware package)
Thank you in advance,
Hi,
You can try flashing the BTW package first without any modification, if the feature you want stops working, just flash your region CSC/Modem package afterwards and it should work again.
If the phone have a soft brick (which it shouldn't, it should work just fine), then you can attempt a downgrade or just flashing back the BTU CSC/modem and wait for your region to have Android Nougat.
All the best,
~Lord
Sent from my Galaxy S7 Edge using Tapatalk
And..
tell me bro.. did it work ??