Hi all,
I am generally not a XDA active reply user. I worked on a lot of Android fixing project. And here is one of mine result.
Please read the whole thread before working on it.
I know everyone is frustrating in upgrading to 4.4.2 but brick during odin process (ext4 fail) and stuck in 4.4.2 bootloader.
PS: This method is currently work on HK note3, but i think this method would work on all note3, Please try this will your own risk, I would not be responsible to all trouble according to this method. Varied N9005 would require different N9005 4.3 Firmware, I personally use HK Firmware because Mine is 16gb Note 3.
Here is the method to solve this problem:
Before working on it, we have to prepare the following things:
1. Odin 3.07 (Yes, 3.09 does not work)
2. HK firmware odin pack (Pit, BL (DO NOT WORK WITH IT, AP, CP, CSC) (Sorry for it is a Chinese link)
OR Workable N9005 4.3 firmware
3. 4.4.2 leaked firmware
4. 4.4.2 rom (I used sweet rom v.7 to fix it)
5. 4.4.2 recovery cwm @Chenglu
5. Samsung driver (bullshxt)
Now lets get started:
1. Flash the 4.4.2 firmware BL by odin.
2. Flash the HK Firmware AP, CP &CSC (Do not use the HK firmware BL)
3. once it done, turn to Download mode again and flash 4.4.2 recovery cwm by odin
4. Run Recovery
5. Wipe everything
6. Flash 4.4.2 rom ( I flashed sweet rom v7 currently)
7. Boot to system and do all the setting ( The sound and the signal are not working)
8. Boot back to download mode
9. Boot the 4.4.2 leaked firmware's CP ( DO NOT WIPE AFTERWARD)
10. Prepare coffee and cookies
11. Enjoy your device!
karnavont said:
Hi all,
...
Click to expand...
Click to collapse
Please edit your title to reflect that (at least at this point) your fix should be considered primarily for the Hong Kong Note 3 bricked by writing XEO 4.4.2.
xclub_101 said:
Please edit your title to reflect that (at least at this point) your fix should be considered primarily for the Hong Kong Note 3 bricked by writing XEO 4.4.2.
Click to expand...
Click to collapse
Actually not, its to all varied Note3 but I do not have all sources given to it, it is generally working on all Note3 who fail in flashing to 4.4.2(to any error in progress during Odin upgrading)
And I did a lot of researches, This problem is not only reflect to HK Note 3 only, there are a lot of people would upgrading to 4.4.2 and stuck in Download mode with UDC start (Not able to downgrade).
karnavont said:
Actually not, its to all varied Note3 but I do not have all sources given to it, it is generally working on all Note3 who fail in flashing to 4.4.2(to any error in progress during Odin upgrading)
And I did a lot of researches, This problem is not only reflect to HK Note 3 only, there are a lot of people would upgrading to 4.4.2 and stuck in Download mode with UDC start (Not able to downgrade).
Click to expand...
Click to collapse
Well, if/when people will post in this thread reporting that the method (which is highly similar to methods that were already posted by other users, most notably Volrath and rinuvimal - which you have not credited anywhere) - then we will know that the method is applicable, and to which specific models!
In other words people using the method on untested models should be warned that they are just doing something that might have never been tested on their model.
xclub_101 said:
Well, if/when people will post in this thread reporting that the method (which is highly similar to methods that were already posted by other users, most notably Volrath and rinuvimal - which you have not credited anywhere) - then we will know that the method is applicable, and to which specific models!
In other words people using the method on untested models should be warned that they are just doing something that might have never been tested on their model.
Click to expand...
Click to collapse
Okay, i changed it, in term of a reference instead
Hi guys, I had the same issue with the 16GB Honk Kong version, and this is how I have finally resolved, trying the methods you suggested and others, and finally got it back to life this way (I'm posting in case this might be useful for any of you as well)
1.- Flash bootloader from N9005XXUENA6_N9005OXXENA5_N9005XXUENA2_OXX (Leaked Kit Kat version)
2.- After reboot, flash bootloader, CP and CSC from the same version (N9005XXUENA6_N9005OXXENA5_N9005XXUENA2_OXX). Flashing bootloader again might not be necessary, but this is how I did it, and how it worked, so I cannot confirm otherwise
3.- Flash AP from N9005ZHUBMI7 (Honk Kong version)
4.- Enter recovery mode and wiped system, cache and dalvik (just in case)
4.- Flash autoroot (n9005-cwm-recovery-6.0.4.6-kitkat(0113).tar)
5.- Flash CWM recovery for KitKat (n9005-cwm-recovery-6.0.4.6-kitkat(0113).tar)
6.- Installed the latest version of SweetRom (SweetROM_V7.00_NA6_4.4.2_N9005.zip) from this thread: http://forum.xda-developers.com/show....php?t=2487425
So long it seems to be working correctly, battery consumption has increased, but this seems normal every time I change my ROM. Thanks again for all your help, and hopefully this will help someone else resolve the issue until the official version for the HK 16GB version is available.
My friend wants to ask this question because he is unable to post a reply with a photos attached.
Is my N9005 32gb Baseband/Bootloader from Hong Kong also?
Kindly see my ScreenShots beloe please. I just don't know where my Note 3 came from.
Thanks in Advance & God Bless
AldrichDSaints said:
My friend wants to ask this question because he is unable to post a reply with a photos attached.
Is my N9005 32gb Baseband/Bootloader from Hong Kong also?
Kindly see my ScreenShots beloe please. I just don't know where my Note 3 came from.
Thanks in Advance & God Bless
Click to expand...
Click to collapse
I think you are using a Custom Rom so there is a posibility it won't be accurate kabayan. But according to your bootloader and baseband its the same as my Hongkong version. And my advice hide your IMEI nexttime.
maumarti2k said:
Hi guys, I had the same issue with the 16GB Honk Kong version, and this is how I have finally resolved, trying the methods you suggested and others, and finally got it back to life this way (I'm posting in case this might be useful for any of you as well)
1.- Flash bootloader from N9005XXUENA6_N9005OXXENA5_N9005XXUENA2_OXX (Leaked Kit Kat version)
2.- After reboot, flash bootloader, CP and CSC from the same version (N9005XXUENA6_N9005OXXENA5_N9005XXUENA2_OXX). Flashing bootloader again might not be necessary, but this is how I did it, and how it worked, so I cannot confirm otherwise
3.- Flash AP from N9005ZHUBMI7 (Honk Kong version)
4.- Enter recovery mode and wiped system, cache and dalvik (just in case)
4.- Flash autoroot (n9005-cwm-recovery-6.0.4.6-kitkat(0113).tar)
5.- Flash CWM recovery for KitKat (n9005-cwm-recovery-6.0.4.6-kitkat(0113).tar)
6.- Installed the latest version of SweetRom (SweetROM_V7.00_NA6_4.4.2_N9005.zip) from this thread: http://forum.xda-developers.com/show....php?t=2487425
So long it seems to be working correctly, battery consumption has increased, but this seems normal every time I change my ROM. Thanks again for all your help, and hopefully this will help someone else resolve the issue until the official version for the HK 16GB version is available.
Click to expand...
Click to collapse
What version of Odin did you used? For the past 24 hours is it stable and any FC's? Are all apps working? I wanna try your guide. Having problem on the O.P. guides.
I am in the exact same situation, all over methods have failed, im going to try this!
3. 4.4.2 leaked firmware is a dead link!
AldrichDSaints said:
My friend wants to ask this question because he is unable to post a reply with a photos attached.
Is my N9005 32gb Baseband/Bootloader from Hong Kong also?
Kindly see my ScreenShots beloe please. I just don't know where my Note 3 came from.
Thanks in Advance & God Bless
Click to expand...
Click to collapse
Fist dude you should never post your IEM EVERRRR
Second you can always hook the phone to Kies and it will tell you what you have
jetbruceli said:
Fist dude you should never post your IEM EVERRRR
Second you can always hook the phone to Kies and it will tell you what you have
Click to expand...
Click to collapse
Seems I have had some success. Although, I found a couple of the instructions difficult to understand. Thanks for posting this, as I no longer have a brick.
Cheers.
filchi756 said:
I think you are using a Custom Rom so there is a posibility it won't be accurate kabayan. But according to your bootloader and baseband its the same as my Hongkong version. And my advice hide your IMEI nexttime.
Click to expand...
Click to collapse
My friend didn't continue to flash the Poland's leak. He will just wait for the OTA on his phone because he is afraid to have a softbrick and I told him also that if he had softbrick his phone the only thing that he can use now is by flashing custom ROM
Samsung Note 3 Region Taiwan Softbrick UDC START
AldrichDSaints said:
My friend didn't continue to flash the Poland's leak. He will just wait for the OTA on his phone because he is afraid to have a softbrick and I told him also that if he had softbrick his phone the only thing that he can use now is by flashing custom ROM
Click to expand...
Click to collapse
does anyone with Samsung Note 3 Taiwan Region?
i got this "UDC START" thing while upgrade to 4.4.2 Region Poland Official ROM
but i dont want to trip knox, better i got back to shop and claim for warranty..
or should i just wait for Official Kit Kat Region Taiwan?
i am still waiting..
if anyone can help, thank you very much.
Samsung Note 3 Region Taiwan Softbrick UDC START
karnavont said:
Actually not, its to all varied Note3 but I do not have all sources given to it, it is generally working on all Note3 who fail in flashing to 4.4.2(to any error in progress during Odin upgrading)
And I did a lot of researches, This problem is not only reflect to HK Note 3 only, there are a lot of people would upgrading to 4.4.2 and stuck in Download mode with UDC start (Not able to downgrade).
Click to expand...
Click to collapse
does anyone with Samsung Note 3 Taiwan Region?
i got this "UDC START" thing while upgrade to 4.4.2 Region Poland Official ROM
but i dont want to trip knox, better i got back to shop and claim for warranty..
or should i just wait for Official Kit Kat Region Taiwan?
i am still waiting..
if anyone can help, thank you very much.
budi_west said:
does anyone with Samsung Note 3 Taiwan Region?
i got this "UDC START" thing while upgrade to 4.4.2 Region Poland Official ROM
but i dont want to trip knox, better i got back to shop and claim for warranty..
or should i just wait for Official Kit Kat Region Taiwan?
i am still waiting..
if anyone can help, thank you very much.
Click to expand...
Click to collapse
i also have the same problem. what should i do
Samsung note 3 Region Taiwan UDC START
sagsans said:
i also have the same problem. what should i do
Click to expand...
Click to collapse
Where do you come from?
i will try the solution given by members from Hongkong Region with flashing CWM recovery and SweetROM, but i just do not know will it work for Taiwan Region, cause Hongkong Firmware is ZHU and Taiwan is ZTU something unique there..
budi_west said:
Where do you come from?
i will try the solution given by members from Hongkong Region with flashing CWM recovery and SweetROM, but i just do not know will it work for Taiwan Region, cause Hongkong Firmware is ZHU and Taiwan is ZTU something unique there..
Click to expand...
Click to collapse
i have try sweetrom, it's not working on my note3 taiwan version. anything for me to try?
Samsung Note 3 Taiwan UDC START
sagsans said:
i have try sweetrom, it's not working on my note3 taiwan version. anything for me to try?
Click to expand...
Click to collapse
How do you flash the SweetROM what version? have you try locky guide?
Technology: The Ultimate Guide To Unbrick 16 Gb International Samsung Galaxy Note 3
http://forum.xda-developers.com/showthread.php?t=2627291
by: Locky Loki
Try this something else out
[ROM]N9005ZHUENB1 Android 4.4.2 Kitkat
http://forum.xda-developers.com/showthread.php?t=2636699
Or
[SOLUTION] Successful flash of leaked NA6 ROM on Hong Kong 32g N9005
http://forum.xda-developers.com/showthread.php?t=2613374
Actually i have started a question [Q] about Note 3 Taiwan UDC START at this forum but with no reply
[Q] Samsung Galaxy Note 3 SM-N9005 Region Taiwan Softbrick UDC START
http://forum.xda-developers.com/showthread.php?p=50061661
Lately i found out somebody posting That he is from Region taiwan anda he is able to flash firmware from region Hongkong and Taiwan Only..
So, i suppose Taiwan Region can seek help from Hongkong Region
Related
Hi all, got an update this morning for the baltic variant of kit kat.
27mb
Sent from my SM-N9005 using XDA Premium 4 mobile app
Details from my Note 3
Sent from my SM-N9005 using XDA Premium 4 mobile app
Downloading...
Off the 3 official kitkat 4.4.2 roms I have tested, Switzerland & Poland & Baltic, I find the Baltic one the best.
At least I get to use kitkat before the BTU variant is released,as long as I use the official sam-mobile firmware, basically I can test the different country variants of the new kitkat 4.4.2 without fear of tripping knox, and I still get the OTA updates.
Did you check your CSC?I had Netherland 4.4.2 PHN-N9005XXUENA6 and after i see what you write here i flash Baltic SEB-N9005XXUENA6 for the OTA update.Everything went ok but after i get the update now it's Poland new version CSC:NB1 (XEO).
Before update...
After update...
But here you don't see the CSC.You must install phone info and there you can see what country you have.
orly_mihai said:
Did you check your CSC?I had Netherland 4.4.2 PHN-N9005XXUENA6 and after i see what you write here i flash Baltic SEB-N9005XXUENA6 for the OTA update.Everything went ok but after i get the update now it's Poland new version CSC:NB1 (XEO).
Click to expand...
Click to collapse
Hi orly.
Didn't see that, weird? why would an update change the CSC back to Poland, my CSC also shows N9005OXXENB1 and kies still says its an official version?
So to try to understand process I did a wipe cache and wipe data in recovery and it still shows N9005OXXENB1, so I re flashed Baltic ROM again and it now shows CSC N9005OXXENA5, now when I plug my note 3 into kies it says it wants to change it back
Just realised that the CSC has changed but both were the same XEO!
See screen dump.
Yes it's like mine.But the problem is that i have the Baltic CSC and now i have the Polonian CSC. Only with OTA update.
orly_mihai said:
But here you don't see the CSC.You must install phone info and there you can see what country you have.
Click to expand...
Click to collapse
To see CSC put in *#1234# in phone dialer
I will flash the Switzerland ROM again after tea and report back, I am guessing that the first kitkat ROM you flash is the CSC you get stuck with unless you root, and the CSC variations are only small software programs that are country specific like the Switzerland ROM. As I flashed the first official Poland ROM I am stuck with XEO.
The core features like like say having 4G in settings are ROM specific not the CSC files, which is why I swapped between all the 3 kitkat versions I have tested..
My first rom was a baltic 4.3 with that one i bought the Phone.First time i have Baltic CSC then uk CSC after flash i made a full wipe and then Netherland CSC. I verify in kies3.
Phew..
So I flashed the Switzerland ROM again and my CSC is now N9005PHNENA2, I tried hard reset from menu and hasen't changed, plugged into pc for kies and says its latest? So I was wrong you can change the CSC it appears?
Which is great as I am waiting for the BTU variant this month hopefully.
I told you. Only on my s3 i need a software for change csc. It mean That you flash a old firmware. You didnt trip Knox?
orly_mihai said:
I told you. Only on my s3 i need a software for change csc. It mean That you flash a old firmware. You didnt trip Knox?
Click to expand...
Click to collapse
Hi orly.
No my Knox fine, as long as I use official 4.4.2 ROM's. Now on latest Poland ROM.
@gadjet Just to clarify, you flashed the official polish rom with odin and knoxx wasnt tripped? If so what odin version did you use?
SPYRO80 said:
@gadjet Just to clarify, you flashed the official polish rom with odin and knoxx wasnt tripped? If so what odin version did you use?
Click to expand...
Click to collapse
I have never been rooted on my Note 3, and I only flashed official firmware from samfirmare.com, not posted ones on XDA just in case, I use odin 3.09
You can see from my previous screen dumps while I flashed different variants this week, and I include a screen shot from my note 3 as of today with the latest Poland ROM.
I've flashed Official Poland 4.4.2 Feb 2014 too... just curious can you install an application from APK files ? I seems having problems not able to do it short while after Factory Reset... already enable in setting thou but still the Install bar can't be click...
? SM-N9005 @ Tapatalk ?
Yes you can.But first you must enable from settings unknown sources.Everything it's ok no wifi drop or something else sayed somebody.
New Poland ROM has same problems for me as first Poland release, i.e.. screen off f-ups and wake lock problems, phone does random lock ups when switching screen back on, and no buttons seem work for a few seconds and screen blank, capacitive buttons sometimes light up? I had to hold power button down for 10 seconds once to get a re boot!
So I am flashing back to the Baltic ROM again.
There is a new Loly firmware update for Singapore available for download in Sammobile. http://www.sammobile.com/firmwares/download/46491/N915GXXU1BOD2_N915GOLB1BOD2_MM1/
Has anyone tried to flash successfully the firmware??? I have tried updating several times but failed It claimed that the system ext4 image file too large or something??? Flashed back the latest Aussie firmware and all is good. I am not sure what I have done wrong here? could Singapore N915G different than the Aussie that would explain why I cant flash on my Aussie N915G??
kuailan said:
There is a new Loly firmware update for Singapore available for download in Sammobile. http://www.sammobile.com/firmwares/download/46491/N915GXXU1BOD2_N915GOLB1BOD2_MM1/
Has anyone tried to flash successfully the firmware??? I have tried updating several times but failed It claimed that the system ext4 image file too large or something??? Flashed back the latest Aussie firmware and all is good. I am not sure what I have done wrong here? could Singapore N915G different than the Aussie that would explain why I cant flash on my Aussie N915G??
Click to expand...
Click to collapse
I've found the Partition is different for Aussie carrier devices. You might need a dfferent PIT file...
Just be advised though, you may not be able to go Aussie carrier roms easily and remember, flashing a PIT file can be dangerous....
ultramag69 said:
I've found the Partition is different for Aussie carrier devices. You might need a dfferent PIT file...
Just be advised though, you may not be able to go Aussie carrier roms easily and remember, flashing a PIT file can be dangerous....
Click to expand...
Click to collapse
Nah...dont think will risk it since still the same version. Im just curious to see if there is some new improvement. I guess i will just see what feedback we will get from those spore owners.
Sent from my SM-N915G using XDA Free mobile app
Singapore 915G
Just flash this Rom with Odin and rooted. No issue, no need to re-partition
My mods:
5x5 Tw Launcher works
Modded S6 keyboard works
3Minit battery works
Edit:
No noticeable difference from the B0C2 I've been using
More crapwares from Singtel the provider
Hi did u use the cf for sm-n915G? cos when i use it it say error. just wondering if you have the steps to root it?
ynotial said:
Hi did u use the cf for sm-n915G? cos when i use it it say error. just wondering if you have the steps to root it?
Click to expand...
Click to collapse
Flh TWRP or CWM with ODIN.
Put latest SuperSU on sd card and flash with TWRP/CWM. There, your rooted...
Hello
I have the official version of Android 5.1.1 SK region and would like to upload Officiální Android version 5.1.1 CZ region. Flash Odin FAIL. Please someone help? Thank you.
JABV90 said:
Hello
I have the official version of Android 5.1.1 SK region and would like to upload Officiální Android version 5.1.1 CZ region. Flash Odin FAIL. Please someone help? Thank you.
Click to expand...
Click to collapse
Had a similar issue yesterday when I tried to update my rooted 5.0.2 to an official 5.1.1. I have used ODIN many times before since SGS3, and back then you were able to mix your system image from other regions, but that apparantly has been locked down by Samsung. Now you can only update an official version of the rom if it exactly matches your existing region. Because you updated your SK international S6 and tried a region set rom from Czech it most likely failed towards the very end of flash with "FAIL".
Your options are: 1) you download the 5.1.1 version for your region in ODIN format from SAMMobile or 2) you use Smart Switch and let it do it for you - in this case you will need to know the SN of your phone as it is used for verification.
Samsung has locked down the serial number with the regions that come with it. So if you have to install, you should update it or use same region odin file. There is a way to break this chain if you are rooted and some additional files are being used in the odin but I am not completely sure as I have not tried it yet. But there are chances that you may void your warranty if you try that or the worse hard brick as it can sometimes change your serial number if not used properly. but I wouldn recommend that. I'll let you know once I understand the usage correctly.
Hi, I have just bought a brand new galaxy S7, model SM-G930F.
Although it is an international model, it carries a snapdragon 820 processor.
I am told , that it is a USA model, built under Verizon.
SM-G930F is supposed to be a global model with exynos, does anyone knoes what is the phone I bought?
Anyway, my real problem is, that the "updates software" option is missing, in "about phone" list.
I am stuck in android 6.0.1
I checked it is not rooted and it must be a genuine phone.
Can anybody guide me through solutions?
I would really appreciate any help.
Thank you
Moving to general S7 Q&A since you say it's a SM-G930F.
Check the back of the phone and verify the phone model. You should be able to update through other options like Kies, unless they've changed that recently.
Johntri said:
Hi, I have just bought a brand new galaxy S7, model SM-G930F.
Although it is an international model, it carries a snapdragon 820 processor.
I am told , that it is a USA model, built under Verizon.
SM-G930F is supposed to be a global model with exynos, does anyone knoes what is the phone I bought?
Anyway, my real problem is, that the "updates software" option is missing, in "about phone" list.
I am stuck in android 6.0.1
I checked it is not rooted and it must be a genuine phone.
Can anybody guide me through solutions?
I would really appreciate any help.
Thank you
Click to expand...
Click to collapse
It's not a G930F if it has a Snapdragon processor
Commonly faked to look like G930F by editing firmware / stickers / model numbers etc, more likely to be the G930V if it's Verizon
Boot to download mode and check the model number in there, that's the only one that can not be faked
(Volume Down & Home & power)
And they likely removed the update option from settings to prevent any problems of the phone updating to either the wrong firmware, or removing their fake edits with a V update
Flash the proper firmware with ODIN 3.12.3 or newer from updato.com once you know your model S7
Galaxy s7 "updates software" option missing
Dear Durham,
Thanks for the help.
Yes, you are right; it is G930V.I have been tricked...
I have visited updato.com and found 12 variants of S7 firmware.
My bootlader version is - 6.0.1 November 20, 16 USA (Verizon) (VZW) G930VVRU4API3
Shall I download and install this one and afterwards make a manual software update or
shall I install the latest - 7.0 August 25, 17 USA (Verizon) (VZW) G930VVRS4BQH1 ?
After successful installation, will these firmware fake modifications( to G930F) disappear permanently?
I am much obliged
Thanks
Johntri said:
Dear Durham,
Thanks for the help.
Yes, you are right; it is G930V.I have been tricked...
I have visited updato.com and found 12 variants of S7 firmware.
My bootlader version is - 6.0.1 November 20, 16 USA (Verizon) (VZW) G930VVRU4API3
Shall I download and install this one and afterwards make a manual software update or
shall I install the latest - 7.0 August 25, 17 USA (Verizon) (VZW) G930VVRS4BQH1 ?
After successful installation, will these firmware fake modifications( to G930F) disappear permanently?
I am much obliged
Thanks
Click to expand...
Click to collapse
The ROMs from updato.com are full ROMs so you can just flash the latest / newest one and you'll be 100% up to date once it boots
Use CSC and not HOME_CSC though as you are going to want to reset after the flash to clear any hacks from the previous ROM (This will wipe the device so backup any important files first)
CSC, AP, BL and CP
Yes this will permanently remove any modifications from the faked ROM
Wish me luck, I will give it a go!
You have been most informative, many thanks.
Good luck :good:
Johntri said:
Wish me luck, I will give it a go!
You have been most informative, many thanks.
Click to expand...
Click to collapse
The good news is that the verizon edition can be rooted and is network unlocked from the factory so as long as ure carrier supports the bands it will still work for you on a side note flash the u firmware not verizon and u wont have any verizon bloatware out of the gate either
Mad scientist, thank you for your intervention.
Just to be clear, which firmware do you suggest me to install, not the verizon G930V?
Could I install the G930F for my country (Europe).
I thought they are incompatible...
As my bootloader version G930V I think I would better stick with the V version.
Are you suggesting not to upgrade to nougat and reinstall factory installed 6.0.1 and better wait for 8?
Yes you are right, I am not good at twiking.Will I have drain baterry issues with nougat?
Dear Durham,
Emergency help!!!!
I installed it succesfully but now it does not recognize my sim card, as it is from a non USA country.
Should I reflash a different firmware? F or U ?
I am from Greece
It seems to be working...
The Verizon logo appears upon starting the phone
But in language selection, there is only English and asian languages available.
Software update finally appeared.
In order to have my langage back, should I reflash with the U ( unlocked version) or the F (global)?
No mobile data.
Maybe I am calling through Verizon.Roaming.Expensive.Scarry...!!
He means that the G930U firmware will flash fine on the G930V, it is the same firmware but without the Verizon bloatware added
You can not flash any other firmwares, it just happens that those two are compatible with each other
Flash straight to the latest
So I shall flash the G930U?
Will my sim card be recognized and mobile data be active.
Nougat 7 or MM 6-your opinion, again?
thnks
No idea if your SIM will be recognised, but if it's not working with the V firmware it's worth a try
As I said, flash the latest firmware which is Nougat
Personally I would be contacting the seller and asking for a refund / exchange for a real G930F that you paid for
firmware
I tried, but he is not cooperative.
How about F version-it worked with it before ?
(only it was modified with the dissapearance of system update.)
Johntri said:
I tried, but he is not cooperative.
How about F version-it worked with it before ?
(only it was modified with the dissapearance of system update.)
Click to expand...
Click to collapse
No you cannot flash any other model firmware, that was NOT the G930F firmware, it was a hacked / faked U or V firmware
I think you better read a good few threads before going much further or you're going to end up with a brick
Contact the seller and request a refund
Don't suppose you can flash CSC files of the 930F on 930V?
Dear all,
Thank you for your help and interest in my problem.
This is indeed a great forum!!!
I tried to flash the F version, but thankfully odin stopped it from the beginning, presenting "failed" message.
I suppose if it continued, I would end up with a brick as Durham suggested.
Finally I flashed he U version, as mad scientist suggested, and up to now it works like a charm.
As Durham advised, I used CSC and not HOME_CSC and the hack was eliminated.
Sim card is recognized, no bloatware and mobile data working.
Let's hope it will continue like this...!!!
Only glitch, not everything is in my home language ( message icon name and in settings-the menu options-any idea how to fix it? - I removed english and left only my language as selection, but onle these remain untranslated)-small problem
I have learned a valuble lesson from my adventure.
Ebay, an organized platfrom may it be, it cannot control each individual's deceivals, so one must be extra wary when buyng from unofficial sources, nomatter good reviews from others...
Thanks again to you all for your help, I would be in serious position right now, if it weren't for you guys.
I have bought a Samsung Galaxy S7 in China. It comes with Chinese firmware (has English language though) but mostly with Chinese software, bloatware and without Google play store. So it does not sync with Google, searches go through Baidu, I can't find and install most apps so it's essentially not very fun to use.
So i want to replace the firmware with any US firmware like G930A, G930U etc. I personally think its possible cause Chinese S7 has Snapdragon 820 chipset like US S7. So basically the hardware of Chinese & US variants of S7 are same.
Just i need a proper step by step guide or ODIN tutorial to make this change. I am really tired of Chinese apps and bloatware. So please guys help me to get ride out of this. Please.
updato.com has all the firmwares for the various models and countries, and it has a step by step guide for flashing with Odin.
Imran5320xm said:
I have bought a Samsung Galaxy S7 in China. It comes with Chinese firmware (has English language though) but mostly with Chinese software, bloatware and without Google play store. So it does not sync with Google, searches go through Baidu, I can't find and install most apps so it's essentially not very fun to use.
So i want to replace the firmware with any US firmware like G930A, G930U etc. I personally think its possible cause Chinese S7 has Snapdragon 820 chipset like US S7. So basically the hardware of Chinese & US variants of S7 are same.
Just i need a proper step by step guide or ODIN tutorial to make this change. I am really tired of Chinese apps and bloatware. So please guys help me to get ride out of this. Please.
Click to expand...
Click to collapse
Boot into download mode, whatever model it says in there is the one you can flash new firmware for, do not try flashing firmware for the wrong model S7 or you can brick it
Exceptions are G930V can use G930U firmwares, and FD can use F firmware, I am not aware of any others
I recommend SamMobile for the firmware download and Odin for flashing it.
Read carefully the flashing instructions.
There are many threads with tutorials, we'll not going to post another tutorial here. Just use the search button and you'll find all the information you need about flashing with Odin.
officialdjalin said:
I recommend SamMobile for the firmware download and Odin for flashing it.
Read carefully the flashing instructions.
There are many threads with tutorials, we'll not going to post another tutorial here. Just use the search button and you'll find all the information you need about flashing with Odin.
Click to expand...
Click to collapse
I know how to flash with ODIN. But i wanted to change my firmware. My S7's model is SM-G9300 which is for Chinese open model. But in this model, there is no google apps and lots of bloatware everywhere. So i wanna replace it with any US firmware specially with SM-930U firmware. Cause i heard it gives smooth performance and bloatware less.
*Detection* said:
Boot into download mode, whatever model it says in there is the one you can flash new firmware for, do not try flashing firmware for the wrong model S7 or you can brick it
Exceptions are G930V can use G930U firmwares, and FD can use F firmware, I am not aware of any others
Click to expand...
Click to collapse
i saw some user changed their S7's G930A or G930V firmware with G930U firmware because of all the US model of S7 has snapdragon's hardware setup. That's why i am interested cause my G9300 also has snapdragon's hardware though it Chinese model. I know i can't flash exynos firmware in snapdragon's model because its completely different hardware setup.
So i wanted to know did anybody can successfully changed their G9300(Chinese) firmware with any US firmware? If did then what's the process? Or how can i replace it? Is there any way to do that without ODIN like with 'dongle' or 'magic flash box'? These are my queries.
Imran5320xm said:
i saw some user changed their S7's G930A or G930V firmware with G930U firmware because of all the US model of S7 has snapdragon's hardware setup. That's why i am interested cause my G9300 also has snapdragon's hardware though it Chinese model. I know i can't flash exynos firmware in snapdragon's model because its completely different hardware setup.
So i wanted to know did anybody can successfully changed their G9300(Chinese) firmware with any US firmware? If did then what's the process? Or how can i replace it? Is there any way to do that without ODIN like with 'dongle' or 'magic flash box'? These are my queries.
Click to expand...
Click to collapse
I already explained, only 1-2 devices have other model firmwares that are compatible, yours is not one of them, nothing to do with hte snapdragon hardware, bootloader etc is different and will BRICK
See here for TWRP and try custom / root to get Google services
https://forum.xda-developers.com/ga...gon/recovery-official-twrp-galaxy-s7-t3458579
*Detection* said:
I already explained, only 1-2 devices have other model firmwares that are compatible, yours is not one of them, nothing to do with hte snapdragon hardware, bootloader etc is different and will BRICK
See here for TWRP and try custom / root to get Google services
https://forum.xda-developers.com/ga...gon/recovery-official-twrp-galaxy-s7-t3458579
Click to expand...
Click to collapse
Thanks a lot Sir. You really helped me a lot. I have successfully unlocked the bootloader of my phone, rooted properly and installed TWRP :laugh: Hope i can now debloated it and can install google services and custom roms. Again many many thanks :good:
Imran5320xm said:
Thanks a lot Sir. You really helped me a lot. I have successfully unlocked the bootloader of my phone, rooted properly and installed TWRP :laugh: Hope i can now debloated it and can install google services and custom roms. Again many many thanks :good:
Click to expand...
Click to collapse
:good:
Imran5320xm said:
I have bought a Samsung Galaxy S7 in China. It comes with Chinese firmware (has English language though) but mostly with Chinese software, bloatware and without Google play store. So it does not sync with Google, searches go through Baidu, I can't find and install most apps so it's essentially not very fun to use.
So i want to replace the firmware with any US firmware like G930A, G930U etc. I personally think its possible cause Chinese S7 has Snapdragon 820 chipset like US S7. So basically the hardware of Chinese & US variants of S7 are same.
Just i need a proper step by step guide or ODIN tutorial to make this change. I am really tired of Chinese apps and bloatware. So please guys help me to get ride out of this. Please.
Click to expand...
Click to collapse
Flash with odin CSC-file from G9350 TGY region (Hong Kong) and other 3 file from your g9300 and you have play market.
stebr said:
Flash with odin CSC-file from G9350 TGY region (Hong Kong) and other 3 file from your g9300 and you have play market.
Click to expand...
Click to collapse
Are you truly sure that we can flash with Hong Kong version (SM-G930FD) firware to our Open China version phones (SM-G9300)? I will try to flash depends on your sureness
I am kind of scared about knox, brick things etc.
---------- Post added at 12:54 AM ---------- Previous post was at 12:50 AM ----------
@stebr Are you truly sure that we can flash with Hong Kong version (SM-G930FD) firware to our Open China version phones (SM-G9300)? I will try to flash depends on your sureness
flash smg930s with smg930fd file through odin
*Detection* said:
:good:
Click to expand...
Click to collapse
Hi,
I bought Samsung Galaxy S7 SM-G930S from the store which was converted into SM-G930FD as I was not having Korean sick apps installed in my mobile and there was no Korean logo of "BANDLTE" while switching off and switching on, when I saw my phone model name it was SM-G930FD and was supporting dual sim both had a same IMEI. But when I restarted my mobile after getting home phone got locked with this message "Custom Binary Blocked By FRP Lock" so decided to got into boot menu there I saw SMG930S written so i flashed mobile with SKT Korean firmware of smg930s but when I installed it I got tons of Korean apps and getting "BANDLTE" logo while switching off and on my phone I lost that Samsung Original logo which I had when my phone was converted into smg930fd. Now I want to switch back to Smg930fd settings/firmware so get rid of these Korean apps and Model to be appear as SMG930FD as the back of my Samsung Galaxy s7 glass has a phone model SMG930FD. I don't know Shopkeeper scammed me or what I told him I wanted to buy SMG930FD but he gave me this converted phone Kindly help me to get back to SMG930FD firmware/settings
stebr said:
Flash with odin CSC-file from G9350 TGY region (Hong Kong) and other 3 file from your g9300 and you have play market.
Click to expand...
Click to collapse
I got a surprise with not working cell data after that and finally got back to open China csc.
ol_st said:
I got a surprise with not working cell data after that and finally got back to open China csc.
Click to expand...
Click to collapse
The same experience... If you are not on Oreo, I advice you to stay on Nougat or even Marshmallow.
Although this post has been posted for a long time but I still want to ask you that how did you get the g9300 device rooted properly?