Hi all, got an update this morning for the baltic variant of kit kat.
27mb
Sent from my SM-N9005 using XDA Premium 4 mobile app
Details from my Note 3
Sent from my SM-N9005 using XDA Premium 4 mobile app
Downloading...
Off the 3 official kitkat 4.4.2 roms I have tested, Switzerland & Poland & Baltic, I find the Baltic one the best.
At least I get to use kitkat before the BTU variant is released,as long as I use the official sam-mobile firmware, basically I can test the different country variants of the new kitkat 4.4.2 without fear of tripping knox, and I still get the OTA updates.
Did you check your CSC?I had Netherland 4.4.2 PHN-N9005XXUENA6 and after i see what you write here i flash Baltic SEB-N9005XXUENA6 for the OTA update.Everything went ok but after i get the update now it's Poland new version CSC:NB1 (XEO).
Before update...
After update...
But here you don't see the CSC.You must install phone info and there you can see what country you have.
orly_mihai said:
Did you check your CSC?I had Netherland 4.4.2 PHN-N9005XXUENA6 and after i see what you write here i flash Baltic SEB-N9005XXUENA6 for the OTA update.Everything went ok but after i get the update now it's Poland new version CSC:NB1 (XEO).
Click to expand...
Click to collapse
Hi orly.
Didn't see that, weird? why would an update change the CSC back to Poland, my CSC also shows N9005OXXENB1 and kies still says its an official version?
So to try to understand process I did a wipe cache and wipe data in recovery and it still shows N9005OXXENB1, so I re flashed Baltic ROM again and it now shows CSC N9005OXXENA5, now when I plug my note 3 into kies it says it wants to change it back
Just realised that the CSC has changed but both were the same XEO!
See screen dump.
Yes it's like mine.But the problem is that i have the Baltic CSC and now i have the Polonian CSC. Only with OTA update.
orly_mihai said:
But here you don't see the CSC.You must install phone info and there you can see what country you have.
Click to expand...
Click to collapse
To see CSC put in *#1234# in phone dialer
I will flash the Switzerland ROM again after tea and report back, I am guessing that the first kitkat ROM you flash is the CSC you get stuck with unless you root, and the CSC variations are only small software programs that are country specific like the Switzerland ROM. As I flashed the first official Poland ROM I am stuck with XEO.
The core features like like say having 4G in settings are ROM specific not the CSC files, which is why I swapped between all the 3 kitkat versions I have tested..
My first rom was a baltic 4.3 with that one i bought the Phone.First time i have Baltic CSC then uk CSC after flash i made a full wipe and then Netherland CSC. I verify in kies3.
Phew..
So I flashed the Switzerland ROM again and my CSC is now N9005PHNENA2, I tried hard reset from menu and hasen't changed, plugged into pc for kies and says its latest? So I was wrong you can change the CSC it appears?
Which is great as I am waiting for the BTU variant this month hopefully.
I told you. Only on my s3 i need a software for change csc. It mean That you flash a old firmware. You didnt trip Knox?
orly_mihai said:
I told you. Only on my s3 i need a software for change csc. It mean That you flash a old firmware. You didnt trip Knox?
Click to expand...
Click to collapse
Hi orly.
No my Knox fine, as long as I use official 4.4.2 ROM's. Now on latest Poland ROM.
@gadjet Just to clarify, you flashed the official polish rom with odin and knoxx wasnt tripped? If so what odin version did you use?
SPYRO80 said:
@gadjet Just to clarify, you flashed the official polish rom with odin and knoxx wasnt tripped? If so what odin version did you use?
Click to expand...
Click to collapse
I have never been rooted on my Note 3, and I only flashed official firmware from samfirmare.com, not posted ones on XDA just in case, I use odin 3.09
You can see from my previous screen dumps while I flashed different variants this week, and I include a screen shot from my note 3 as of today with the latest Poland ROM.
I've flashed Official Poland 4.4.2 Feb 2014 too... just curious can you install an application from APK files ? I seems having problems not able to do it short while after Factory Reset... already enable in setting thou but still the Install bar can't be click...
? SM-N9005 @ Tapatalk ?
Yes you can.But first you must enable from settings unknown sources.Everything it's ok no wifi drop or something else sayed somebody.
New Poland ROM has same problems for me as first Poland release, i.e.. screen off f-ups and wake lock problems, phone does random lock ups when switching screen back on, and no buttons seem work for a few seconds and screen blank, capacitive buttons sometimes light up? I had to hold power button down for 10 seconds once to get a re boot!
So I am flashing back to the Baltic ROM again.
Related
All I see problem and not downloading. Is there any confirmed downloads and installs of Nougat on G930F , like on any continent ?
No there isn't. Bye
rajman said:
No there isn't. Bye
Click to expand...
Click to collapse
Amazing ! Bye !
rajman said:
No there isn't. Bye
Click to expand...
Click to collapse
russiandivxclub said:
All I see problem and not downloading. Is there any confirmed downloads and installs of Nougat on G930F , like on any continent ?
Click to expand...
Click to collapse
What do you mean? British BTU officially updated two days ago and it's available for download, or I'm just not understanding your question? XD
Sent from my SM-G930F using Tapatalk
It downloaded yesterday both of mine and my wife's S7's (UK - SG930F - Unlocked Version)
Yes I also got the BTU OTA 3 days ago. I was having unlock issues, basically requiring me to enter pin most of the time and not accepting fingerpint unlock. Deleted and entered my fingerprints then a factory reset and still the same. Flashed back to australian firmware and the problem went away. Samsung Pay also does not work for US users with BTU firmware but it works fine with australian. So I'm back to waiting and hope when I get the next OTA the unlock issue doesn't happen again. I personally wasn't blown away but I only stayed with it a day. I didn't like the new notification panel...but I'm sure most do.
I have also had problems with my S7 on Nougat BTU. My S7 is a ETL (Checz Unlocked) in Spain. Data connection doesn't seem to work. All works except that (calls, sms, wi-fi). I tried also O2C, also Nougat. I've downgraded to MM ETL and Data connection works fine. I'm now downloading MM BTU, just in case data works in MM. If it does, I will try to upgrade to N.
You are missing point guys. I have regular international unbranded (no carrier) version of SGS7 Model G930F. Question is this.
Is there any confirmed OTA downloads and successful updates without ANY modifications. Download and install just simply by going into download manually or automatic notification about Nougat available just like any other update. I see ODIN, BTU some other crap that I need to do. NO. I want OTA without doing anything. So once again is there any confirmed OTA updates for international version of G930F. Like Right now I have software version: G930FXXU1BPLB/G930FOJV1BPK2/G930FXXU1BPJJ
If you can point of what EXACT version of international unit I have that'll be great because if people receiving updates already I don't understand why I am not.
P.S.
I do understand there are different versions of G930F but all I want is OTA to Nougat without doing anything.
Thanks !
russiandivxclub said:
You are missing point guys. I have regular international unbranded (no carrier) version of SGS7 Model G930F. Question is this.
Is there any confirmed OTA downloads and successful updates without ANY modifications. Download and install just simply by going into download manually or automatic notification about Nougat available just like any other update. I see ODIN, BTU some other crap that I need to do. NO. I want OTA without doing anything. So once again is there any confirmed OTA updates for international version of G930F. Like Right now I have software version: G930FXXU1BPLB/G930FOJV1BPK2/G930FXXU1BPJJ
If you can point of what EXACT version of international unit I have that'll be great because if people receiving updates already I don't understand why I am not.
P.S.
I do understand there are different versions of G930F but all I want is OTA to Nougat without doing anything.
Thanks !
Click to expand...
Click to collapse
Only country code BTU has OTA update for Nougat, if your G930F is not running a BTU CSC, you have to wait
Or, flash BTU Marshmallow and you'll get the OTA straight away
*Detection* said:
Only country code BTU has OTA update for Nougat, if your G930F is not running a BTU CSC, you have to wait
Or, flash BTU Marshmallow and you'll get the OTA straight away
Click to expand...
Click to collapse
I've downloaded the btu firmware from sammobile. There are 5 files therein. Do I flash all or just the AP with odin?
auriga1000 said:
I've downloaded the btu firmware from sammobile. There are 5 files therein. Do I flash all or just the AP with odin?
Click to expand...
Click to collapse
I flashed all except HOME_CSC
(CSC will reset the phone to factory defaults)
Which is a good thing for a major OS upgrade IMO
Does anyone have a link to BTU_CSC?the CSC in the BTU 7.0 firmware doesn't change my product code
That is my point. BTU is a variant of G930F. How about All of them ? I mean they're not saying some variants are being updated, they're saying G930F and G935F being updated. I wish someone had some understand or some stats of what variants are receiving update.
Hi guys,
i got a branding free Galaxy S7 and found out that i got an ATO firmware installed (phone is from Austria) so I am thinking about to upload the same firmware but in DBT (for Germany).
can this be achieved without loosing any data / apps on the phone or will this result in a factory reset?
I only want to have this regarding the OTA Android 7 update around the corner ... I guess its not really needed to be honest...
Thanks for your answers.!
André
Count on factory resetting your phone. Did mine recently and it was worth reinstalling all apps (you can use Samsung backup but it restores not all settings within all apps) just love the new nougat ?
Verstuurd vanaf mijn SM-G930F met Tapatalk
J4fSkyNet said:
Hi guys,
i got a branding free Galaxy S7 and found out that i got an ATO firmware installed (phone is from Austria) so I am thinking about to upload the same firmware but in DBT (for Germany).
can this be achieved without loosing any data / apps on the phone or will this result in a factory reset?
I only want to have this regarding the OTA Android 7 update around the corner ... I guess its not really needed to be honest...
Thanks for your answers.!
André
Click to expand...
Click to collapse
The change you need to have done is the CSC, this can be done by flashing your desired locations CSC by flashing it through Odin while phone is on download mode. You can find CSC for your desired firmware/location by browsing on SamMobile.
When the firmware zip downloads; extract it and then when on Odin program on your PC, click on the CSC button and locate the file called 'HOME_CSC'
The reason to why you choose Home CSC is because it will keep all your data on your phone.
Good luck and tell me how it goes
Sent from my SM-G930F using XDA Labs
Thanks mate!
Is there any well working tool for backing up data like contacts/messages/pictures just for the worst scenario?
I am aware that thate from APPs might be an issue but it like a full factory reset then ...
André
I am also stuck to the ATO open austria firmware and wondering WHY nearly all carriers here in austria got the nougat update but the open austria did not?? I thought the carriers will update later because they have to modify the firmware with their apps and logos etc..
i install btu and today i see that vodafone spain has nougat, do you know if i install vodafone spain and install super stock 2.2.0 is gonna work.
GZA1337 said:
I am also stuck to the ATO open austria firmware and wondering WHY nearly all carriers here in austria got the nougat update but the open austria did not?? I thought the carriers will update later because they have to modify the firmware with their apps and logos etc..
Click to expand...
Click to collapse
I have got an unlocked Galaxy S7 (G930F) and have flashed the android nougat update (BTU - UK - 7.0). It is working fine.
Since I have updated to nougat, there are some updates released (bug fixes, I can confirm this on sammobile site) but are not available when I check for the updates in settings.
Any idea on what this issue might be.
If you have either root or custom recovery you can't receive OTAs but you can update using SmartSwitch on your PC
kamranali44 said:
I have got an unlocked Galaxy S7 (G930F) and have flashed the android nougat update (BTU - UK - 7.0). It is working fine.
Since I have updated to nougat, there are some updates released (bug fixes, I can confirm this on sammobile site) but are not available when I check for the updates in settings.
Any idea on what this issue might be.
Click to expand...
Click to collapse
hi mate
Updates ( if you are not rooted) are CSC carrier dependent , if your carrier or CSC do not issue any updates ...you will not have them.
When you checked in sammobile you checked if your carrier / CSC had updates?
No updates on Smart switch
userName'dYa said:
If you have either root or custom recovery you can't receive OTAs but you can update using SmartSwitch on your PC
Click to expand...
Click to collapse
I do not have root or custom recovery. I have downloaded the firmware from sammobile and checked that the knox warranty is not tripped over and the device status is still official.
MAX 404 said:
hi mate
Updates ( if you are not rooted) are CSC carrier dependent , if your carrier or CSC do not issue any updates ...you will not have them.
When you checked in sammobile you checked if your carrier / CSC had updates?
Click to expand...
Click to collapse
The BTU firmwares in the UK are not network dependent as far as I know and they come installed in unlocked devices with no network bloatware.
I do remember flashing the CSC (G930FOXA1DPLT - that's the current one) which came with the BTU firmware. The new CSC has updates (G930FOXA1DQB1).
Am I missing something or is the device still dependent on a network to approve this.
Do you get any error?
userName'dYa said:
Do you get any error?
Click to expand...
Click to collapse
No, it says "the latest updates have already been installed "
I even had this issue on Android 6 so I downloaded the Android 7 and flashed it via odin. Now there are updates but I would like to get the OTA to update it.
kamranali44 said:
No, it says "the latest updates have already been installed "
I even had this issue on Android 6 so I downloaded the Android 7 and flashed it via odin. Now there are updates but I would like to get the OTA to update it.
Click to expand...
Click to collapse
Are these bug fixes for the country AND the carrier you are using
userName'dYa said:
Are these bug fixes for the country AND the carrier you are using
Click to expand...
Click to collapse
Yes the bug fixes are for this country (UK).
I am not sure if they are carrier dependent as it is an unlocked software (I am on O2 and there is a different firmware for O2 locked devices).
Are they still carrier dependent is the phone is unlocked?
kamranali44 said:
Yes the bug fixes are for this country (UK).
I am not sure if they are carrier dependent as it is an unlocked software (I am on O2 and there is a different firmware for O2 locked devices).
Are they still carrier dependent is the phone is unlocked?
Click to expand...
Click to collapse
Yes the carrier matters even for unlocked phones
userName'dYa said:
Yes the carrier matters even for unlocked phones
Click to expand...
Click to collapse
Okay, in this case I think I will have to wait for O2 to approve them.
I thought the idea of having an unlocked phone from samsung is to use any sim and get updates directly from Samsung when they release it.
kamranali44 said:
The BTU firmwares in the UK are not network dependent as far as I know and they come installed in unlocked devices with no network bloatware.
I do remember flashing the CSC (G930FOXA1DPLT - that's the current one) which came with the BTU firmware. The new CSC has updates (G930FOXA1DQB1).
Am I missing something or is the device still dependent on a network to approve this.
Click to expand...
Click to collapse
Hi
You get updates either by the carrier or by the CSC , in your case you have an unbranded firmware , BTU, so no carrier updates...you will get an update only when an update for BTU unbranded firmware is release it , independently if there are other firmwares newer than yours around....only way to keep updated to the latests is flashing it yourself any new release , check this thread if you deciede to go that way
Try to get your CSC code by installing Phone Info from the market : I too have flashed the first official Nougat BTU UK 7.0 firmware with Odin, with a complete reset of the phone, but in my case I still have CSC = ITV and not BTU.
This seems to prevent us from getting the new OTA update : somewhere I've read that after the Odin procedure I should have entered recovery and factory reset the phone from there to get the CSV changed to BTU as the installed firmware is a "multi-csc" variant.
We still can download today's new firmware from SamMobile and use home_csc to avoid resetting again the phone.
Hope someone more expert than me can confirm/correct my statements
Inviato dal mio SM-G930F utilizzando Tapatalk
I was wondering the same and SergioA is right. I still have the DBT CSC although I was flashing the BTU Firmware. Thanks for clarification
userName'dYa said:
Yes the carrier matters even for unlocked phones
Click to expand...
Click to collapse
So my S7(Sprint) running on G930U firmware will go back to Sprint Nougat firmware full of bloatware?
MAX 404 said:
Hi
You get updates either by the carrier or by the CSC , in your case you have an unbranded firmware , BTU, so no carrier updates...you will get an update only when an update for BTU unbranded firmware is release it , independently if there are other firmwares newer than yours around....only way to keep updated to the latests is flashing it yourself any new release , check this thread if you deciede to go that way
Click to expand...
Click to collapse
The BTU has a firmware update available on sammobile but not it's not OTA update on my phone.
What if I download the new update and flash it via odin with HOME_CSC file added. Will it start the updates by carrrier?
SergioA said:
Try to get your CSC code by installing Phone Info from the market : I too have flashed the first official Nougat BTU UK 7.0 firmware with Odin, with a complete reset of the phone, but in my case I still have CSC = ITV and not BTU.
This seems to prevent us from getting the new OTA update : somewhere I've read that after the Odin procedure I should have entered recovery and factory reset the phone from there to get the CSV changed to BTU as the installed firmware is a "multi-csc" variant.
We still can download today's new firmware from SamMobile and use home_csc to avoid resetting again the phone.
Hope someone more expert than me can confirm/correct my statements
Inviato dal mio SM-G930F utilizzando Tapatalk
Click to expand...
Click to collapse
My S7 DUOS FD and my wife's S7 F both recieved the Nougat OTA update DQB1 today, mine was originally CSC XSG (UAE) and mi wife's was CSC TTT (Trinidad And Tobago), and both were updated to CSC BTU Nougat Final release, changing the CSC to BTU (this will wipe out your memory in the process but for a newer OS version it is recommended). I had doubts about getting any OTA updates since my S7 is the FD version which does not exists as a BTU phone originally, but in the end I got the update.
Long story short, if you want to recieve OTA updates after sideloading firmware with ODIN with a different CSC, you should fully convert to that new CSC, otherwise you won't get the OTA's.
kamranali44 said:
The BTU has a firmware update available on sammobile but not it's not OTA update on my phone.
What if I download the new update and flash it via odin with HOME_CSC file added. Will it start the updates by carrrier?
Click to expand...
Click to collapse
Hi
if you have a DPLT firmware you should get it soon.....unless your system by some reason is not set as original ( even if knox is tripped but your system is set as original you will get it) anyhow is faster if you download it yourself and flash it , use home_csc so you will not factory reset your phone , NOTE: has to be the same home_csc that you have in your phone right now , not any home_csc for example:
Lets say you want to flash the latest firmware and it happens to be from France and you do not want to loose any of your apps , config or data
1 find out what CSC is installed in your phone ( phoneinfo app is great for that) in your case BTU
2 download the latest possible firmware for your CSC and extract from it the home_csc file , save it , discard the rest
3 download the latest firmware available , in our example France , extract from it download the MAIN-file and extract AP BL & CP save it , discard the other 2 files ( home_csc and CSC from France firmware
4 now take AP BL & CP from the latest firmware ( in our example France) and take the home_csc from a BTU firmware ( why , because is the CSC installed in your phone) and flash the together
In that way you can always have the latest in your phone without waiting for it , phone will not be knox tripped , will be 100%official as is all official firmware
If your using the btu version for UK phones, then how did you manage not to brick your phone? The UK phones do not have snapdragon, they have the Samsung chips.
MAX 404 said:
Hi
if you have a DPLT firmware you should get it soon.....unless your system by some reason is not set as original ( even if knox is tripped but your system is set as original you will get it) anyhow is faster if you download it yourself and flash it , use home_csc so you will not factory reset your phone , NOTE: has to be the same home_csc that you have in your phone right now , not any home_csc for example:
Lets say you want to flash the latest firmware and it happens to be from France and you do not want to loose any of your apps , config or data
1 find out what CSC is installed in your phone ( phoneinfo app is great for that) in your case BTU
2 download the latest possible firmware for your CSC and extract from it the home_csc file , save it , discard the rest
3 download the latest firmware available , in our example France , extract from it download the MAIN-file and extract AP BL & CP save it , discard the other 2 files ( home_csc and CSC from France firmware
4 now take AP BL & CP from the latest firmware ( in our example France) and take the home_csc from a BTU firmware ( why , because is the CSC installed in your phone) and flash the together
In that way you can always have the latest in your phone without waiting for it , phone will not be knox tripped , will be 100%official as is all official firmware
Click to expand...
Click to collapse
Thank you, you are a hero :good:. I did update via odin and installed it without losing any data.
As I have said I have previously (about a week ago) used the CSC file rather than HOME_CSC.
I have the Phone Info app, The Orignal CSC code is blank(is it normal?), Does this look normal as I have not checked the CSC before updating to android nougat. I have added a screenshot of it.
Hi everybody, I do not know if there is some discussion open yet but I can not speak and write so much in English.
I come to the problem already written on the SAMSUNG ASSISTENZA forums without solving anything, the only solution to bring it into service.
Ok I have a Samsung S6 SM-G920F which now works only with 2g network, with 3g and 4g network does not work, has field but does not surf.
These tests have been carried out:
Tested SIM sim card on another phone works.
Try other cards on my phone do not work.
Done Update ITV has solved nothing.
Tried other roms I now have French Android firmware 7.0 (I've read that many have solved) flashing and hard reset all the same problem.
I have no root.
Other evidence, removed the board inserted another card nothing.
Changed APN manually.
Restore Factory Settings.
Restore network settings.
The problem has never been resolved.
Here you are a lot better in the world, maybe you know how to do it and thank you.
Sorry for my English but I used Google Translate
Did you tried to flash only modem...?
Maybe that can solve the problem, not shure....!
And better to flash the stock rom that device had when you bought it
vforvlive said:
Did you tried to flash only modem...?
Maybe that can solve the problem, not shure....!
And better to flash the stock rom that device had when you bought it
Click to expand...
Click to collapse
I tried to change only the modem I did not solve anything ....
MikiGra said:
I tried to change only the modem I did not solve anything ....
Click to expand...
Click to collapse
Ok....
Last time try this
1. Wipe everything
2. Flash via latest Odin stock last BTU or DBT 6.0.1 firmware
3. Wipe again and restart
vforvlive said:
Ok....
Last time try this
1. Wipe everything
2. Flash via latest Odin stock last BTU or DBT 6.0.1 firmware
3. Wipe again and restart
Click to expand...
Click to collapse
Ok two questions:
1 Can I flash the original modem of the device even if I have android 7.0?
2 what do you mean by "2. Flash via latest Odin stock last BTU or DBT 6.0.1 firmware" what is BTU or DBT ... sorry i do not understand some terms
MikiGra said:
Ok two questions:
1 Can I flash the original modem of the device even if I have android 7.0?
2 what do you mean by "2. Flash via latest Odin stock last BTU or DBT 6.0.1 firmware" what is BTU or DBT ... sorry i do not understand some terms
Click to expand...
Click to collapse
1. you can try, i think it will fitt
2. BTU = United Kingdom, DBT = Germany
they are bouth unbranded firmwares
vforvlive said:
1. you can try, i think it will fitt
2. BTU = United Kingdom, DBT = Germany
they are bouth unbranded firmwares
Click to expand...
Click to collapse
Ok ok, understand, perfect.
I noticed unpacking the firmware ITV Italia no brands that until December had a modem, modem.bin then in the next releases the modem has always been updated, since December I got the problems.
As you said you might be the file modem.bin thread that does not work well.
I tried with Odin 3.12.3 to mount the only modem.bin file in CP .... just do not install me Odin is stuck before downloading it on the phone.
Do you know how to do it and why do not you install me?
I'll try to do this and then if it's okay I'll go to the Firmware BTU or DBT .... I think the modem is the problem too because the rest of the phone works and goes only in 2G/Edge
Thanks !!!!!!!!!!!!
Ciao vforvlive
Then I tried how you said to wipe ... install the DBT 6.0.1 firmware of the latest in germany and then wipe again nothing works .... only working with 2g network.
I just noticed that H + just keeps the uploaded arrow down there is virtually no data exchange.
I also tried to put the modem.bin file when my phone worked with odin not installing me.
It's absurd I changed 20 firmware nothing ever does the same thing.
It is not even the antenna or some other thing because in 2g it normally works it obviously travels like a snail.
vforvlive said:
1. you can try, i think it will fitt
2. BTU = United Kingdom, DBT = Germany
they are bouth unbranded firmwares
Click to expand...
Click to collapse
Then I tried how you said to wipe ... install the DBT 6.0.1 firmware of the latest in germany and then wipe again nothing works .... only working with 2g network.
I just noticed that H + just keeps the uploaded arrow down there is virtually no data exchange.
I also tried to put the modem.bin file when my phone worked with odin not installing me.
It's absurd I changed 20 firmware nothing ever does the same thing.
It is not even the antenna or some other thing because in 2g it normally works it obviously travels like a snail.
I am also facing the same issue and did not find any solution yet. If you have more info please share it
Hello, I've been waiting a really long time for One UI 5 and I couldn't wait anymore once I heard the stable is out in India. I downloaded the INU firmware using Frija then I changed my CSC to INU using SamFwRP tool and flashed the INU firmware using patched Odin. Then I reverted back my CSC to EUX again with SamFwRP.
After all of this, finally did a wipe cache and factory reset. Now I'm wondering...since my CSC is back to EUX...will I still receive OTAs ? For example One UI 5.1 OTA or December security patch whenever that releases
EDIT: Weirdest thing is when I flashed INU HOME_CSC on my phone there was no data that was reset. Is it because they're both OXM ?
EDIT2: DISCLAIMER - I'm not an Android dev, I'm not knowledgeable on anything technical or otherwise. Please take advice from anyone else but me!
Thanks for the tip about Frija, I had forgotten all about that one (been checking sammobile and galaxyfirmware daily for weeks now) I'm downloading now and will edit this post with success or failure! (I'm EUY)
As for your question about still receiving OTAs or not, I honestly don't know because I've rooted every phone I've ever had in 17 years! but I can't see why it would be a problem if you didn't receive them as you can always download them from Frija surly not?
Okay download complete, I'm going in.. wish me luck!
beanbean50 said:
Thanks for the tip about Frija, I had forgotten all about that one (been checking sammobile and galaxyfirmware daily for weeks now) I'm downloading now and will edit this post with success or failure! (I'm EUY)
As for your question about still receiving OTAs or not, I honestly don't know because I've rooted every phone I've ever had in 17 years! but I can't see why it would be a problem if you didn't receive them as you can always download them from Frija surly not?
Okay download complete, I'm going in.. wish me luck!
Click to expand...
Click to collapse
Well yeah, you can. But I don't wanna lol. I'm not a ROM hax0r. I'm just a power user. I don't even have a Windows laptop around most of the time and Heimdall looks scary .
Is EUY the same as EUX ? I saw it on the firmware websites...but I never heard about it. Is it for France or something ? Rest of the EU uses EUX as far as I know.
I think EUX, EUY, INU are just the same ****, not sure. They all have OXM Multi CSC and they kinda look identical tbh as far as numbers go. So if you revert your CSC back to EUY...updates should work, no ?
Success!
I just flashed the Magisk patched AP file the CP file and HOME CSC file and all up and running Android 13/One UI 5... (also rooted) thanks bro..
I think if you revert your CSC back to EUY then yes I can't see any reason why you shouldn't receive OTAs
thought it was too good to be true, keep getting a service provider update required (but it won't update) and access denied here and there. can't even odin flash back to Android 12 for some strange reason hmm
It's working perfectly for me. Have you reverted CSC ? And deleted cache and factory reset after flashing. I have literally 0 errors and 5G works. But I deleted did a wipe cache and factory reset and reverted CSC as well
beanbean50 said:
thought it was too good to be true, keep getting a service provider update required (but it won't update) and access denied here and there. can't even odin flash back to Android 12 for some strange reason hmm
Click to expand...
Click to collapse
Wrote a comment
What Odin version too ? I used the latest PatcheD version from here: https://forum.xda-developers.com/t/patched-odin-3-13-1.3762572/
XME - Malaysia released OneUI 5 Android 13 for Z Flip 3
This is how my INU firmware with EUX CSC looks.
case81 said:
What Odin version too ? I used the latest PatcheD version from here: https://forum.xda-developers.com/t/patched-odin-3-13-1.3762572/
Click to expand...
Click to collapse
tried that one as well, it flashed and booted okay but with tons of errors, luckily I managed to get back to Android 12 and will stay there till the EUY update comes along.
beanbean50 said:
tried that one as well, it flashed and booted okay but with tons of errors, luckily I managed to get back to Android 12 and will stay there till the EUY update comes along.
Click to expand...
Click to collapse
Tons of errors ? Where ? Just curious if I have them as well
case81 said:
Tons of errors ? Where ? Just curious if I have them as well
Click to expand...
Click to collapse
I think it's to do with trying to root it. It detects root and denies access to the PC, to update the service provider and many more things something like 'we have detected a tampered device, please contact your customer service'
beanbean50 said:
I think it's to do with trying to root it. It detects root and denies access to the PC, to update the service provider and many more things something like 'we have detected a tampered device, please contact your customer service'
Click to expand...
Click to collapse
So...this happens when changing CSC ?
case81 said:
So...this happens when changing CSC ?
Click to expand...
Click to collapse
All okay now must have been gremlins .. I think it detects your CSC when installing, it reads your simcard.
Thanks for this thread!
It worked very well for me. Factory reset is a chore after, but everything works and I haven't had any issues so far. I do not root, so nothing to report about that.
Installed the firmware on my BTU phone
Works wonder 0 errors or issues
did Samsung and google cloud backups before flashing during setup restored both and its as if I never did a thing everything was put in its place and it was the most effortless phone setup I ever did
Now I'm just enjoying my android 13
case81 said:
Hello, I've been waiting a really long time for One UI 5 and I couldn't wait anymore once I heard the stable is out in India. I downloaded the INU firmware using Frija then I changed my CSC to INU using SamFwRP tool and flashed the INU firmware using patched Odin. Then I reverted back my CSC to EUX again with SamFwRP.
After all of this, finally did a wipe cache and factory reset. Now I'm wondering...since my CSC is back to EUX...will I still receive OTAs ? For example One UI 5.1 OTA or December security patch whenever that releases
EDIT: Weirdest thing is when I flashed INU HOME_CSC on my phone there was no data that was reset. Is it because they're both OXM ?
Click to expand...
Click to collapse
Hi, flashing the home-csc does not restore the phone to factory settings ( wipe data etc ) If you flash the csc, then your phone will be wiped and restored as it was out of the box. Also you dont have to change CSC, i'm on XSA and I flashed the IDU firmware.... This does not chage the CSC of the phone anyway. A lot of the Samsung firmware are multi - CSC these days.
noel_leon said:
Thanks for this thread!
It worked very well for me. Factory reset is a chore after, but everything works and I haven't had any issues so far. I do not root, so nothing to report about that.
Click to expand...
Click to collapse
I'm not sure you actually have to do it. I'm just a big giant noob with no knowledge in Android, this is why I did all that
slysurfer said:
Hi, flashing the home-csc does not restore the phone to factory settings ( wipe data etc ) If you flash the csc, then your phone will be wiped and restored as it was out of the box. Also you dont have to change CSC, i'm on XSA and I flashed the IDU firmware.... This does not chage the CSC of the phone anyway. A lot of the Samsung firmware are multi - CSC these days.
Click to expand...
Click to collapse
So I could actually just have stayed on EUX without changing my CSC while flashing and everything would have worked fine ? Thanks, that's really good to know!