I have got an unlocked Galaxy S7 (G930F) and have flashed the android nougat update (BTU - UK - 7.0). It is working fine.
Since I have updated to nougat, there are some updates released (bug fixes, I can confirm this on sammobile site) but are not available when I check for the updates in settings.
Any idea on what this issue might be.
If you have either root or custom recovery you can't receive OTAs but you can update using SmartSwitch on your PC
kamranali44 said:
I have got an unlocked Galaxy S7 (G930F) and have flashed the android nougat update (BTU - UK - 7.0). It is working fine.
Since I have updated to nougat, there are some updates released (bug fixes, I can confirm this on sammobile site) but are not available when I check for the updates in settings.
Any idea on what this issue might be.
Click to expand...
Click to collapse
hi mate
Updates ( if you are not rooted) are CSC carrier dependent , if your carrier or CSC do not issue any updates ...you will not have them.
When you checked in sammobile you checked if your carrier / CSC had updates?
No updates on Smart switch
userName'dYa said:
If you have either root or custom recovery you can't receive OTAs but you can update using SmartSwitch on your PC
Click to expand...
Click to collapse
I do not have root or custom recovery. I have downloaded the firmware from sammobile and checked that the knox warranty is not tripped over and the device status is still official.
MAX 404 said:
hi mate
Updates ( if you are not rooted) are CSC carrier dependent , if your carrier or CSC do not issue any updates ...you will not have them.
When you checked in sammobile you checked if your carrier / CSC had updates?
Click to expand...
Click to collapse
The BTU firmwares in the UK are not network dependent as far as I know and they come installed in unlocked devices with no network bloatware.
I do remember flashing the CSC (G930FOXA1DPLT - that's the current one) which came with the BTU firmware. The new CSC has updates (G930FOXA1DQB1).
Am I missing something or is the device still dependent on a network to approve this.
Do you get any error?
userName'dYa said:
Do you get any error?
Click to expand...
Click to collapse
No, it says "the latest updates have already been installed "
I even had this issue on Android 6 so I downloaded the Android 7 and flashed it via odin. Now there are updates but I would like to get the OTA to update it.
kamranali44 said:
No, it says "the latest updates have already been installed "
I even had this issue on Android 6 so I downloaded the Android 7 and flashed it via odin. Now there are updates but I would like to get the OTA to update it.
Click to expand...
Click to collapse
Are these bug fixes for the country AND the carrier you are using
userName'dYa said:
Are these bug fixes for the country AND the carrier you are using
Click to expand...
Click to collapse
Yes the bug fixes are for this country (UK).
I am not sure if they are carrier dependent as it is an unlocked software (I am on O2 and there is a different firmware for O2 locked devices).
Are they still carrier dependent is the phone is unlocked?
kamranali44 said:
Yes the bug fixes are for this country (UK).
I am not sure if they are carrier dependent as it is an unlocked software (I am on O2 and there is a different firmware for O2 locked devices).
Are they still carrier dependent is the phone is unlocked?
Click to expand...
Click to collapse
Yes the carrier matters even for unlocked phones
userName'dYa said:
Yes the carrier matters even for unlocked phones
Click to expand...
Click to collapse
Okay, in this case I think I will have to wait for O2 to approve them.
I thought the idea of having an unlocked phone from samsung is to use any sim and get updates directly from Samsung when they release it.
kamranali44 said:
The BTU firmwares in the UK are not network dependent as far as I know and they come installed in unlocked devices with no network bloatware.
I do remember flashing the CSC (G930FOXA1DPLT - that's the current one) which came with the BTU firmware. The new CSC has updates (G930FOXA1DQB1).
Am I missing something or is the device still dependent on a network to approve this.
Click to expand...
Click to collapse
Hi
You get updates either by the carrier or by the CSC , in your case you have an unbranded firmware , BTU, so no carrier updates...you will get an update only when an update for BTU unbranded firmware is release it , independently if there are other firmwares newer than yours around....only way to keep updated to the latests is flashing it yourself any new release , check this thread if you deciede to go that way
Try to get your CSC code by installing Phone Info from the market : I too have flashed the first official Nougat BTU UK 7.0 firmware with Odin, with a complete reset of the phone, but in my case I still have CSC = ITV and not BTU.
This seems to prevent us from getting the new OTA update : somewhere I've read that after the Odin procedure I should have entered recovery and factory reset the phone from there to get the CSV changed to BTU as the installed firmware is a "multi-csc" variant.
We still can download today's new firmware from SamMobile and use home_csc to avoid resetting again the phone.
Hope someone more expert than me can confirm/correct my statements
Inviato dal mio SM-G930F utilizzando Tapatalk
I was wondering the same and SergioA is right. I still have the DBT CSC although I was flashing the BTU Firmware. Thanks for clarification
userName'dYa said:
Yes the carrier matters even for unlocked phones
Click to expand...
Click to collapse
So my S7(Sprint) running on G930U firmware will go back to Sprint Nougat firmware full of bloatware?
MAX 404 said:
Hi
You get updates either by the carrier or by the CSC , in your case you have an unbranded firmware , BTU, so no carrier updates...you will get an update only when an update for BTU unbranded firmware is release it , independently if there are other firmwares newer than yours around....only way to keep updated to the latests is flashing it yourself any new release , check this thread if you deciede to go that way
Click to expand...
Click to collapse
The BTU has a firmware update available on sammobile but not it's not OTA update on my phone.
What if I download the new update and flash it via odin with HOME_CSC file added. Will it start the updates by carrrier?
SergioA said:
Try to get your CSC code by installing Phone Info from the market : I too have flashed the first official Nougat BTU UK 7.0 firmware with Odin, with a complete reset of the phone, but in my case I still have CSC = ITV and not BTU.
This seems to prevent us from getting the new OTA update : somewhere I've read that after the Odin procedure I should have entered recovery and factory reset the phone from there to get the CSV changed to BTU as the installed firmware is a "multi-csc" variant.
We still can download today's new firmware from SamMobile and use home_csc to avoid resetting again the phone.
Hope someone more expert than me can confirm/correct my statements
Inviato dal mio SM-G930F utilizzando Tapatalk
Click to expand...
Click to collapse
My S7 DUOS FD and my wife's S7 F both recieved the Nougat OTA update DQB1 today, mine was originally CSC XSG (UAE) and mi wife's was CSC TTT (Trinidad And Tobago), and both were updated to CSC BTU Nougat Final release, changing the CSC to BTU (this will wipe out your memory in the process but for a newer OS version it is recommended). I had doubts about getting any OTA updates since my S7 is the FD version which does not exists as a BTU phone originally, but in the end I got the update.
Long story short, if you want to recieve OTA updates after sideloading firmware with ODIN with a different CSC, you should fully convert to that new CSC, otherwise you won't get the OTA's.
kamranali44 said:
The BTU has a firmware update available on sammobile but not it's not OTA update on my phone.
What if I download the new update and flash it via odin with HOME_CSC file added. Will it start the updates by carrrier?
Click to expand...
Click to collapse
Hi
if you have a DPLT firmware you should get it soon.....unless your system by some reason is not set as original ( even if knox is tripped but your system is set as original you will get it) anyhow is faster if you download it yourself and flash it , use home_csc so you will not factory reset your phone , NOTE: has to be the same home_csc that you have in your phone right now , not any home_csc for example:
Lets say you want to flash the latest firmware and it happens to be from France and you do not want to loose any of your apps , config or data
1 find out what CSC is installed in your phone ( phoneinfo app is great for that) in your case BTU
2 download the latest possible firmware for your CSC and extract from it the home_csc file , save it , discard the rest
3 download the latest firmware available , in our example France , extract from it download the MAIN-file and extract AP BL & CP save it , discard the other 2 files ( home_csc and CSC from France firmware
4 now take AP BL & CP from the latest firmware ( in our example France) and take the home_csc from a BTU firmware ( why , because is the CSC installed in your phone) and flash the together
In that way you can always have the latest in your phone without waiting for it , phone will not be knox tripped , will be 100%official as is all official firmware
If your using the btu version for UK phones, then how did you manage not to brick your phone? The UK phones do not have snapdragon, they have the Samsung chips.
MAX 404 said:
Hi
if you have a DPLT firmware you should get it soon.....unless your system by some reason is not set as original ( even if knox is tripped but your system is set as original you will get it) anyhow is faster if you download it yourself and flash it , use home_csc so you will not factory reset your phone , NOTE: has to be the same home_csc that you have in your phone right now , not any home_csc for example:
Lets say you want to flash the latest firmware and it happens to be from France and you do not want to loose any of your apps , config or data
1 find out what CSC is installed in your phone ( phoneinfo app is great for that) in your case BTU
2 download the latest possible firmware for your CSC and extract from it the home_csc file , save it , discard the rest
3 download the latest firmware available , in our example France , extract from it download the MAIN-file and extract AP BL & CP save it , discard the other 2 files ( home_csc and CSC from France firmware
4 now take AP BL & CP from the latest firmware ( in our example France) and take the home_csc from a BTU firmware ( why , because is the CSC installed in your phone) and flash the together
In that way you can always have the latest in your phone without waiting for it , phone will not be knox tripped , will be 100%official as is all official firmware
Click to expand...
Click to collapse
Thank you, you are a hero :good:. I did update via odin and installed it without losing any data.
As I have said I have previously (about a week ago) used the CSC file rather than HOME_CSC.
I have the Phone Info app, The Orignal CSC code is blank(is it normal?), Does this look normal as I have not checked the CSC before updating to android nougat. I have added a screenshot of it.
Related
All I see problem and not downloading. Is there any confirmed downloads and installs of Nougat on G930F , like on any continent ?
No there isn't. Bye
rajman said:
No there isn't. Bye
Click to expand...
Click to collapse
Amazing ! Bye !
rajman said:
No there isn't. Bye
Click to expand...
Click to collapse
russiandivxclub said:
All I see problem and not downloading. Is there any confirmed downloads and installs of Nougat on G930F , like on any continent ?
Click to expand...
Click to collapse
What do you mean? British BTU officially updated two days ago and it's available for download, or I'm just not understanding your question? XD
Sent from my SM-G930F using Tapatalk
It downloaded yesterday both of mine and my wife's S7's (UK - SG930F - Unlocked Version)
Yes I also got the BTU OTA 3 days ago. I was having unlock issues, basically requiring me to enter pin most of the time and not accepting fingerpint unlock. Deleted and entered my fingerprints then a factory reset and still the same. Flashed back to australian firmware and the problem went away. Samsung Pay also does not work for US users with BTU firmware but it works fine with australian. So I'm back to waiting and hope when I get the next OTA the unlock issue doesn't happen again. I personally wasn't blown away but I only stayed with it a day. I didn't like the new notification panel...but I'm sure most do.
I have also had problems with my S7 on Nougat BTU. My S7 is a ETL (Checz Unlocked) in Spain. Data connection doesn't seem to work. All works except that (calls, sms, wi-fi). I tried also O2C, also Nougat. I've downgraded to MM ETL and Data connection works fine. I'm now downloading MM BTU, just in case data works in MM. If it does, I will try to upgrade to N.
You are missing point guys. I have regular international unbranded (no carrier) version of SGS7 Model G930F. Question is this.
Is there any confirmed OTA downloads and successful updates without ANY modifications. Download and install just simply by going into download manually or automatic notification about Nougat available just like any other update. I see ODIN, BTU some other crap that I need to do. NO. I want OTA without doing anything. So once again is there any confirmed OTA updates for international version of G930F. Like Right now I have software version: G930FXXU1BPLB/G930FOJV1BPK2/G930FXXU1BPJJ
If you can point of what EXACT version of international unit I have that'll be great because if people receiving updates already I don't understand why I am not.
P.S.
I do understand there are different versions of G930F but all I want is OTA to Nougat without doing anything.
Thanks !
russiandivxclub said:
You are missing point guys. I have regular international unbranded (no carrier) version of SGS7 Model G930F. Question is this.
Is there any confirmed OTA downloads and successful updates without ANY modifications. Download and install just simply by going into download manually or automatic notification about Nougat available just like any other update. I see ODIN, BTU some other crap that I need to do. NO. I want OTA without doing anything. So once again is there any confirmed OTA updates for international version of G930F. Like Right now I have software version: G930FXXU1BPLB/G930FOJV1BPK2/G930FXXU1BPJJ
If you can point of what EXACT version of international unit I have that'll be great because if people receiving updates already I don't understand why I am not.
P.S.
I do understand there are different versions of G930F but all I want is OTA to Nougat without doing anything.
Thanks !
Click to expand...
Click to collapse
Only country code BTU has OTA update for Nougat, if your G930F is not running a BTU CSC, you have to wait
Or, flash BTU Marshmallow and you'll get the OTA straight away
*Detection* said:
Only country code BTU has OTA update for Nougat, if your G930F is not running a BTU CSC, you have to wait
Or, flash BTU Marshmallow and you'll get the OTA straight away
Click to expand...
Click to collapse
I've downloaded the btu firmware from sammobile. There are 5 files therein. Do I flash all or just the AP with odin?
auriga1000 said:
I've downloaded the btu firmware from sammobile. There are 5 files therein. Do I flash all or just the AP with odin?
Click to expand...
Click to collapse
I flashed all except HOME_CSC
(CSC will reset the phone to factory defaults)
Which is a good thing for a major OS upgrade IMO
Does anyone have a link to BTU_CSC?the CSC in the BTU 7.0 firmware doesn't change my product code
That is my point. BTU is a variant of G930F. How about All of them ? I mean they're not saying some variants are being updated, they're saying G930F and G935F being updated. I wish someone had some understand or some stats of what variants are receiving update.
I have an S7 on MM, when are Nougat OTA's are coming to the UK? I don't bother rooting any longer but I am tempted to sideload if Samsung are going to take forever.
Depend on what s7 you have?
Edge G935
I'm on a sim only plan with BT so I own my phone rather than rent, I have spoken to BT who tell me its a Samsung OTA and they have no control, and Samsung merely tell me to to contact my Carrier.
Might end up sideloading!
It's already out. What CSC are you using?
Is the device network locked.
Can you install "Phone Info" app from play store and check which CSC is currently set as your active CSC. The CSC is the one based on which the updates are set.
kamranali44 said:
It's already out. What CSC are you using?
Is the device network locked.
Can you install "Phone Info" app from play store and check which CSC is currently set as your active CSC. The CSC is the one based on which the updates are set.
Click to expand...
Click to collapse
XEU
Unlocked
It's not been released yet from what i can see on SamMobile.
InfernalByte said:
XEU
Unlocked
Click to expand...
Click to collapse
I have the same UK firmware but with BTU. The difference is given below (Copied from someone on xda). https://forum.xda-developers.com/galaxy-s6-edge/help/btu-xeu-t3100911
"I think i worked out the difference between BTU and XEU.
BTU firmware are on phones that come directly from Samsung (unbranded)
XEU firmware are on Sim Free handsets that are generic (unbranded) but not from Samsung"
You can now decide whether to wait for XEU or flash BTU. If you do decide to flash, backup data first and confirm that the active csc is set to BTU for OTA to work.
mimo2008 said:
It's not been released yet from what i can see on SamMobile.
Click to expand...
Click to collapse
Is this mine? Listed after the update half way down the page?
https://www.sammobile.com/2017/01/1...mware-for-the-galaxy-s7-now-available-online/
kamranali44 said:
I have the same UK firmware but with BTU. The difference is given below (Copied from someone on xda). https://forum.xda-developers.com/galaxy-s6-edge/help/btu-xeu-t3100911
"I think i worked out the difference between BTU and XEU.
BTU firmware are on phones that come directly from Samsung (unbranded)
XEU firmware are on Sim Free handsets that are generic (unbranded) but not from Samsung"
You can now decide whether to wait for XEU or flash BTU. If you do decide to flash, backup data first and confirm that the active csc is set to BTU for OTA to work.
Click to expand...
Click to collapse
I may wait a few weeks, unless its done with the flash Icannot set XEU to BTU, there is no option.
kamranali44 said:
I have the same UK firmware but with BTU. The difference is given below (Copied from someone on xda). https://forum.xda-developers.com/galaxy-s6-edge/help/btu-xeu-t3100911
"I think i worked out the difference between BTU and XEU.
BTU firmware are on phones that come directly from Samsung (unbranded)
XEU firmware are on Sim Free handsets that are generic (unbranded) but not from Samsung"
Click to expand...
Click to collapse
Is your phone direct from Samsung? Mine is Sim Free, unbranded not from Samsung.
Exu is Ireland band by the looks of it.
InfernalByte said:
Is your phone direct from Samsung? Mine is Sim Free, unbranded not from Samsung.
Click to expand...
Click to collapse
I brought it from ebay but I did flash the BTU firmware myself. My phone orignally had multi csc which included BTU and had a german (DBT) csc set as active.
You cannot change the CSC by device but you can flash a firmware with completely different CSC and then flash the BTU one.
I flashed mine with O2U firmware which made it forget the multi csc and then flashed BTU which set the active csc as BTU. I originally flashed the first nougat update release by Samsung and then received the performance update using OTA.
This might make it simple "You are not getting the BTU OTA updates because you don't have BTU CSC but DBT. You flashed BTU Rom but it's a multi CSC Rom and it has inside your original DBT CSC. So your CSC didn't change to BTU...If you want to have BTU CSC so you can get OTA upfates from BTU you have first to flash a rom that it's CSC is not inside the multi CSC you have now, let's say for example a rom with EUR CSC. Then you CSC will change to EUR. After that you can reflash BTU Rom and your CSC will change to BTU...Then you can take the OTA updates from BTU normally..."
Check this thread - https://forum.xda-developers.com/ga...ta-updates-t3552316/post70923890#post70923890
Check post number 32, I added the screenshots over there as well.
There is http://updato.com/ as well if you want to download firmware faster (a lot faster than sammobile). I think they are official but have only checked one so far.
Backup the data first, flashing a different csc will factory reset the device.
That's what I kinda done I was on vodafone and preferred to be on btu so I flashed that instead but once I flashed it done wipe cache and data factory reset just to make sure all was ok on another note I kept wifi calling as well.
Hi all,
I'm back to Samsung after a number of years away at HTC and LG! Last Samsung was an S2 and so I've used Odin, reflashed firmwares, rooted etc. before so know my way around this stuff in a general sense.
I got an S7 from CEX recently to replace my broken LG G3 but the firmware on it seems to be a slightly older / foreign one and I want to get onto a clean UK / EU firmware, so I can keep stem with OTAs that I see friends' S7's receiving. My current firmware is baseband G930FXXU1BPJE, build number G930FXXU1ZPK4.
I've looked on SAMMobile and can see two options for UK unbranded; XEU and BTU. So my first question is what one should I use and what the difference is?
Secondly, when I use Odin to flash whichever one is correct, will I need to repartition? Or will factory resetting after flash be enough to properly correct the CSC?
Finally, will this still show up as an 'untampered' phone, and receive OTA correctly?
Thanks for the help.
XEU has the most updated firmware atm with a February security patch, where BTU is still on January afaik, both unbranded UK firmwares
If you flash them using CSC (Not HOME_CSC) which will reset the phone and change CSC, then you will remain KNOX 0x0 and receive OTAs for whichever CSC you choose, XEU or BTU
No need to repartition
I did read something about needing to flash to another CSC supported by the current CSC on your phone atm (Multi CSC) before flashing to the one you want to change to, but not sure about that, I've only ever switched between BTU and XEU, and BTU is multi CSC containing XEU too
*Detection* said:
XEU has the most updated firmware atm with a February security patch, where BTU is still on January afaik, both unbranded UK firmwares
If you flash them using CSC (Not HOME_CSC) which will reset the phone and change CSC, then you will remain KNOX 0x0 and receive OTAs for whichever CSC you choose, XEU or BTU
No need to repartition
I did read something about needing to flash to another CSC supported by the current CSC on your phone atm (Multi CSC) before flashing to the one you want to change to, but not sure about that, I've only ever switched between BTU and XEU, and BTU is multi CSC containing XEU too
Click to expand...
Click to collapse
Thanks, I'll stay alert to that possibility. I'll go with the XEU variant and hopefully be ok. Just need to backup my stuff first.
gyaku_zuki said:
Thanks, I'll stay alert to that possibility. I'll go with the XEU variant and hopefully be ok. Just need to backup my stuff first.
Click to expand...
Click to collapse
Hello, did you have any luck changing your CSC without Re-Partitioning ?
Im in the same situation right now (DDE CSC, still on 6.0.1) and I am kinda scared after reading so many posts where people bricked their phones.
Since there is no official Nougat release in the USA yet, I was planning on installing the "BTU" Nougat official firmware intended for the UK. Do I need to do anything with changing the CSC to use in the USA, or just flash everything as-is in the firmware download? I don't understand if the CSC change is REQUIRED to match the country you are using the phone in, or just recommended. The current Marshmallow build is showing a CSC of OJV (middle east)
What are you USA folks out there doing? I am on Straight Talk (AT&T sim).
My current phone is giving me a lot of problems, and I'd really appreciate a response as I need to get switched over to this S7 ASAP. I realize I can just use Marshmallow but am really hoping to get to Nougat so I don't have to reflash and potentially lose data down the road.
Thank you!
If the CSC you want to change to is not included in the CSC already on your phone, you'll need to use CSC of the new ROM (Not HOME_CSC) along with the other 3 sections, and check the "Repartition" option in PIT settings of ODIN
This will wipe your phone back to factory settings
Are you rooted?
*Detection* said:
If the CSC you want to change to is not included in the CSC already on your phone, you'll need to use CSC of the new ROM (Not HOME_CSC) along with the other 3 sections, and check the "Repartition" option in PIT settings of ODIN
Click to expand...
Click to collapse
He doesn't need to check repartition. Despite the fact that it is designed for downgrading and unbricking (exclusively, in most cases ), it is not required to do that if only CSC change is needed. Only thing he need to do is using CSC section of the ROM (not Home_CSC because it is preserving old settings in the phone, message to The Founder of the topic ).
Generally, when I was switching to BTU I flashed Firmware with CSC different that BTU (for example Sweden rom) and then flashed BTU sofware. CSC has changed flawlessly
And when you have rooted phone, you can change CSC manually. That extremely ease you effort.
i would just flash the firmware and the csc that comes with it because then you will get updates in the future. if the csc doesn't match the firmware you wont ever get updates so just do a samsung cloud backup and flash the nougat But its weird that someone in the usa doesn'ty have nougat because i thought usa was 1 of the first with nougat.
RiTCHiE007 is right. If you want to receive OTA updates, CSC must match with the type of firmware it comes from. That is why you need to change CSC from US to BTU. Here is a thread that will help you out providing explanation of the topic.
Hello fellas,
I have just flashed latest stock firmware, and couldn't help noticing there was no Samsung Pay or Android Pay app.
When attempting to access both items through Google Play Store, it says my device is not compatible with the version available. How come this is possible? I can't think that the S7 has been outed of Samsung Pay, there has to be something else.
Could it be a problem with the CSC? My region code is ARO (Argentina Unbranded), but after checking the app Phone Info, I have realized that the CSC Installed belongs to TTT (Trinidad y Tobago) and not my region. This always happen when flashing CSC, since it's a multi-CSC, it randomly selects a region. If anyone knows a way of flashing the proper CSC through ODIN, that would be awesome.
Thanks!
hemp_invader said:
Hello fellas,
I have just flashed latest stock firmware, and couldn't help noticing there was no Samsung Pay or Android Pay app.
When attempting to access both items through Google Play Store, it says my device is not compatible with the version available. How come this is possible? I can't think that the S7 has been outed of Samsung Pay, there has to be something else.
Could it be a problem with the CSC? My region code is ARO (Argentina Unbranded), but after checking the app Phone Info, I have realized that the CSC Installed belongs to TTT (Trinidad y Tobago) and not my region. This always happen when flashing CSC, since it's a multi-CSC, it randomly selects a region. If anyone knows a way of flashing the proper CSC through ODIN, that would be awesome.
Thanks!
Click to expand...
Click to collapse
Hi
Download the firmware you want, extract BL , CP and AP , now download the firmware for you country /carrier , extract from it the CSC file
not home_csc , and flash the BL , CP, AP from the first firmware with the CSC from your country
BAckup this will factory reset your phone
MAX 404 said:
Hi
Download the firmware you want, extract BL , CP and AP , now download the firmware for you country /carrier , extract from it the CSC file
not home_csc , and flash the BL , CP, AP from the first firmware with the CSC from your country
BAckup this will factory reset your phone
Click to expand...
Click to collapse
Thanks for replying.
The firmware I want is the one that comes with the ARO package, the problem is that such package also includes a multi-country CSC. Among those there is this ARO region I'm needing. My device is Unbranded, I won't install a CSC from a carrier.
Also, I don't have root and I'm not planning to have it either.
hemp_invader said:
Thanks for replying.
The firmware I want is the one that comes with the ARO package, the problem is that such package also includes a multi-country CSC. Among those there is this ARO region I'm needing. My device is Unbranded, I won't install a CSC from a carrier.
Also, I don't have root and I'm not planning to have it either.
Click to expand...
Click to collapse
Hi
Sorry I read your first post again
Samsung Pay will not work again after you root your phone , if knox is set 0x1 there is no chance to make it work
Android pay is possible if knox is set but firmware is official ( no root) and if the flashed firmware (CSC) has that option
Is ARO part of the multi CSC you flashed with TTT?
You need a CSC that has Android pay , do you remember what CSC you had when it worked?
MAX 404 said:
Hi
Sorry I read your first post again
Samsung Pay will not work again after you root your phone , if knox is set 0x1 there is no chance to make it work
Android pay is possible if knox is set but firmware is official ( no root) and if the flashed firmware (CSC) has that option
Is ARO part of the multi CSC you flashed with TTT?
You need a CSC that has Android pay , do you remember what CSC you had when it worked?
Click to expand...
Click to collapse
BTU. I will try that one. Thanks mate!
hemp_invader said:
BTU. I will try that one. Thanks mate!
Click to expand...
Click to collapse
BTU (UK) i think it works , if your carrier at home offers the service you can flash any unbranded firmware (BL, CP andAP) with the CSC from your carrier
That way you can have unbranded firmware plus you carrier CSC
Magisk fakes 0x0 doesn't it?
Beanvee7 said:
Magisk fakes 0x0 doesn't it?
Click to expand...
Click to collapse
yes , magisk hides from android SU detection but samsung pay also looks for knox 0 x 1 ....if you are or were rooted SP will not work
Beanvee7 said:
Magisk fakes 0x0 doesn't it?
Click to expand...
Click to collapse
Yes it does, but some additional kernel modifications are still required for Knox to work. So stock firmware isn't fooled. Most custom s7 kernels have them though.