Related
last night i went to sleep with m galaxy s6 g920f STOCK 5.1.1 had a fair amount of battery left in t. When a woke up in the morning my phone was dead i thought the battery would have been consumed . I plugged it in charged it . Now when i try to turn it on it just jo to "samsung Galxy s6" logo ,screen becomes a bit yellowish and the phone restarts same thing is happening again and again.
Now i have tried to reinstall to odin, then going into recovery factory reset cache but same results. anyone please help this phone was running stock os so... i have searchd the web but there are no ways to fix it ...
Regards
any help please !
guys i need your help please
I would suggest you download a ROM from Sammmobile that corresponds to your country and install that via ODIN and if that doesn't work try one from a different country or one tha is unknown (I.E. that doesn't belong to a any country), I softbricked my phone trying to install H3G for UK and for what ever reason it would not install. However...
I downloaded one called BTU and that worked using this app SamFirm. To get my version I installed type the Model number SM-G920F and Region BTU to download, once it has downloaded then decrypt the file by clicking the Decrypt button and unzip the decrypted file and then use ODIN to install that one. Using the SamFirm app downlaods it faster and gets the latest from Samsung as far as I am concerned. Good Luck.
protonpower said:
I would suggest you download a ROM from Sammmobile that corresponds to your country and install that via ODIN and if that doesn't work try one from a different country or one tha is unknown (I.E. that doesn't belong to a any country), I softbricked my phone trying to install H3G for UK and for what ever reason it would not install. However...
I downloaded one called BTU and that worked using this app SamFirm. To get my version I installed type the Model number SM-G920F and Region BTU to download, once it has downloaded then decrypt the file by clicking the Decrypt button and unzip the decrypted file and then use ODIN to install that one. Using the SamFirm app downlaods it faster and gets the latest from Samsung as far as I am concerned. Good Luck.
Click to expand...
Click to collapse
Thank you very much for your reply i have tried flashing 6 stock firmwares but to no avail ? Can you suggest anything else ?
M.Nabeel said:
Thank you very much for your reply i have tried flashing 6 stock firmwares but to no avail ? Can you suggest anything else ?
Click to expand...
Click to collapse
The only thing I can think of is trying one from your country and trying any other one. You can use the SamFirm software to download different versions, else I think your phone is broken for some unknown reason and you will have to get it fixed under the warranty. Or install the Samsung Smart Switch from samsung and get the firmware installed that way via the Emergency Software and recovery mode, but it will wipe everything and do a factory reset. Also you will need the serial number and model number of your phone.
OK, no matter what method I try I am unable to achieve a successful flash of my phone. I have tried it via odin with many different firmware versions but all seem to fail almost immediately. The only way to resolve this is to use samsung switch and reset phone to stock. The problem is stock firmware is german vodafone full of vodafone bloatware, I want to get rid of it and flash a UK unbranded firmware but no matter what I do I am unable to achieve this. I can see from the forum that there are many people out there with the same flashing problem but with no real responses on how to achieve the goal. There must be people out there that have achieved this task but don't seem to be offering up much help?
ok
sinbrad said:
OK, no matter what method I try I am unable to achieve a successful flash of my phone. I have tried it via odin with many different firmware versions but all seem to fail almost immediately. The only way to resolve this is to use samsung switch and reset phone to stock. The problem is stock firmware is german vodafone full of vodafone bloatware, I want to get rid of it and flash a UK unbranded firmware but no matter what I do I am unable to achieve this. I can see from the forum that there are many people out there with the same flashing problem but with no real responses on how to achieve the goal. There must be people out there that have achieved this task but don't seem to be offering up much help?
Click to expand...
Click to collapse
Is your phone international unlocked out of the box? I dont believe it was, because as far as I've read international unlocked phones come with "unbranded" firmware. The unlocked ones I know can be pretty much flashed with "any" international firmware, which is what you are trying to do.
If you dont know for sure. Odin the stock German Vodaphone. Let the phone boot. Boot back to stock recovery, then factory reset and clear cache.
Then let the phone boot...Download phone info app by vndnguyen (free version is fine)...Open the app, go to CSC Code tab. Then that will tell you the active CSC code and your firmware CSC code...you are looking for the line that says Available CSC Codes. If it only lists German Vodaphone (VD2), then I believe you are stuck til the phone is unlocked.
Anyone, jump in here if I'm mistaken. I am using this as reference as, I've checked my G920F. Mine is unlocked tho and I can flash any firmware from any region with no problem. Hopefully I've answered your question.
I had no luck with the firmwares on the firmware page either.
If you are on OI9 check http://forum.xda-developers.com/galaxy-s6/general/guide-android-6-0-marshmallow-beta-how-t3277533
And try flashing the first stock firmware https://drive.google.com/folderview...sharing&tid=0B40ItdHKfkyQd1hJQXVDU3dDU2c#list (not the android M one!) via ODIN.
Basic process is:
Download the above file, extract, there should be 4 files inside (AP,BL,CP,CSC), simply select each one to go in the relevant box on ODIN, then go into download mode on your phone and click start...
N.B. Be aware that the above firmware contains a PIT file which will reformat and resize the partitions on your phone, so make sure you have a copy of the stock firmware that works before trying the flash (i.e. the one which Smart Switch downloads). You can grab it from your windows %TEMP% directory during the smart switch download (it first downloads a file to TMPxxx, then extracts it into a directory of the same name, its these files you want. They should be the four files beginning with the type of ODIN file you are flashing (AP,BL,CP,CSC). The files get deleted after the firmware has flashed so make sure you watch the process. If things go wrong you can re-flash these files via ODIN
As far as I was led to believe and when I purchased the phone it did state factory unlocked. I was able to put in any sim when I received it and didn't have to go through any aftermarket unlock process?
I have the same problem i have a unlocked G-920F with egyptian CSC and firmware 5.1.1 .when i try to flash BTU 5.1.1 via odin, i have the same problem and only way to recover is via smart switch.BTU firmware is from sammobile
abdussamad said:
I have the same problem i have a unlocked G-920F with egyptian CSC and firmware 5.1.1 .when i try to flash BTU 5.1.1 via odin, i have the same problem and only way to recover is via smart switch.BTU firmware is from sammobile
Click to expand...
Click to collapse
So, seems this is not uncommon?
ok the way to do it is download this file
https://drive.google.com/folderview...sharing&tid=0B40ItdHKfkyQd1hJQXVDU3dDU2c#list
its BTU firmware of 5.1.1
and flash this firmware you'll have 4 files AP,BL,CP,CSC,put it in the respective boxes in odin.I have tested this right now and it works
Press "thanks" if i have helped
Well downloaded the app for CSC info and it states available CSC codes are...
ATL, AVF, CNX, CYV, MOB, MTL, OMN, SIM, SWC, TCL, VD2, VDC, VDF, VDH, VDI, VGR, VIP & VOD
Any ideas?
Ok, tried to get stock firmware when samsung smart switch was downloading and installing but couldn't see where the firmware was being downloaded to? Tried windows temp etc but nothing appeared during download and install?
sinbrad said:
Ok, tried to get stock firmware when samsung smart switch was downloading and installing but couldn't see where the firmware was being downloaded to? Tried windows temp etc but nothing appeared during download and install?
Click to expand...
Click to collapse
Just type in %TEMP% into you windows explorer address bar and it will take you there. arrange by date modified and you will see the size ticking up during the download, before the flash starts it will extract into a folder with the same name, the md5 files can be grabbed from there
No probs here
abdussamad said:
I have the same problem i have a unlocked G-920F with egyptian CSC and firmware 5.1.1 .when i try to flash BTU 5.1.1 via odin, i have the same problem and only way to recover is via smart switch.BTU firmware is from sammobile
Click to expand...
Click to collapse
I flashed BTU firmware on my 920F international unlocked that came with UAE firmware without any problems. Idk
sd_N said:
I flashed BTU firmware on my 920F international unlocked that came with UAE firmware without any problems. Idk
Click to expand...
Click to collapse
Which file and which method?
aaronjp said:
Just type in %TEMP% into you windows explorer address bar and it will take you there. arrange by date modified and you will see the size ticking up during the download, before the flash starts it will extract into a folder with the same name, the md5 files can be grabbed from there
Click to expand...
Click to collapse
Ok, Got it this time, all four files. Will give the method above a go and if it fails at least I've got the stock firmware to fall back on?
Magic, have had great success. Now on the BTU firmware and everything is up and running. Got the stock as well just in case but if this continues to work won't be reinstalling stock. So a big thanks to those who helped
sinbrad said:
Magic, have had great success. Now on the BTU firmware and everything is up and running. Got the stock as well just in case but if this continues to work won't be reinstalling stock. So a big thanks to those who helped
Click to expand...
Click to collapse
Glad you are sorted
Helo,
I have big problem with flash new firmware to SG955F with odin, I tried many diferent firmware for SG955F and always almost same error: KERNEL REV. CHECK FAIL. DEVICE:3, BINARY: 1
Tried in odin flash only AP, and all other comnination but same error....sometimes is device :3 binary:1, device:4 binary:1....and like that
Someone knows some solution how can I solve this problem???
xoxo7 said:
Helo,
I have big problem with flash new firmware to SG955F with odin, I tried many diferent firmware for SG955F and always almost same error: KERNEL REV. CHECK FAIL. DEVICE:3, BINARY: 1
Tried in odin flash only AP, and all other comnination but same error....sometimes is device :3 binary:1, device:4 binary:1....and like that
Someone knows some solution how can I solve this problem???
Click to expand...
Click to collapse
Device X , Binary Y errors in Odin mean you are trying to flash an older firmware version than what is on your phone. Device X = current bootloader version number on phone. Binary Y = bootloader version you are trying to flash.
You will have to find latest version to flash for your phone. Bootloader version number is the 5 th number from the right of the firmware name.
spawnlives said:
Device X , Binary Y errors in Odin mean you are trying to flash an older firmware version than what is on your phone. Device X = current bootloader version number on phone. Binary Y = bootloader version you are trying to flash.
You will have to find latest version to flash for your phone. Bootloader version number is the 5 th number from the right of the firmware name.
Click to expand...
Click to collapse
this looks when I am in download mode befor i press start and before I get device and binary error:
https://ibb.co/in65De
Thanks for useful answer!
Tell me please how can I know which firmware i have to find now? Which bootloader number is for my phone?
On my phone I dont have now any firmware....I can go to download mode and twrp only
tnx
when i am in download mode:
https://ibb.co/in65De
Not sure if it will help if you can't boot into phone but in twrp have you tried a factory reset to see if it fixes issue or if you have a backup you could try and restore your phone from that.
If not and since don't know what version you were on before you will have to find the latest firmware for your region (and carrier).
Firmware name will look this(depending on your model)
Example.: G955FXXU2CRF7 the number 2 (5th from the right) will be the bootloader version number. The higher the number the latest released firmware.
I normally use updato.com for my firmware but you could use sammobil or samfirm.
https://updato.com/firmware-archive-select-model?q=S8+&exact=1
Make sure you select the right phone model and in the filter section select region (and carrier) to refine search.
Note: This will replace twrp with stock recovery and also use latest Odin 3.13.1
spawnlives said:
Not sure if it will help if you can't boot into phone but in twrp have you tried a factory reset to see if it fixes issue or if you have a backup you could try and restore your phone from that.
If not and since don't know what version you were on before you will have to find the latest firmware for your region (and carrier).
Firmware name will look this(depending on your model)
Example.: G955FXXU2CRF7 the number 2 (5th from the right) will be the bootloader version number. The higher the number the latest released firmware.
I normally use updato.com for my firmware but you could use sammobil or samfirm.
https://updato.com/firmware-archive-select-model?q=S8+&exact=1
Make sure you select the right phone model and in the filter section select region (and carrier) to refine search.
Note: This will replace twrp with stock recovery and also use latest Odin 3.13.1
Click to expand...
Click to collapse
I sloved it!
That was problem what you said....I always tried flash firmware with wrong bootloader number (1,2,3 bootloader nr), but I needed firmware with bootloader nr 4....when I tried firmware with bootloader version 4 everything was ok.
spawnlives said:
Device X , Binary Y errors in Odin mean you are trying to flash an older firmware version than what is on your phone. Device X = current bootloader version number on phone. Binary Y = bootloader version you are trying to flash.
You will have to find latest version to flash for your phone. Bootloader version number is the 5 th number from the right of the firmware name.
Click to expand...
Click to collapse
Does this apply to the CSC and AP too? Or is there a different way to tell the binary version of the AP and CSC? Because I get the error telling me I've fused 7 and bin 6 for CSC and fused 6 and bin 5 for AP.
spawnlives said:
Not sure if it will help if you can't boot into phone but in twrp have you tried a factory reset to see if it fixes issue or if you have a backup you could try and restore your phone from that.
If not and since don't know what version you were on before you will have to find the latest firmware for your region (and carrier).
Firmware name will look this(depending on your model)
Example.: G955FXXU2CRF7 the number 2 (5th from the right) will be the bootloader version number. The higher the number the latest released firmware.
I normally use updato.com for my firmware but you could use sammobil or samfirm.
https://updato.com/firmware-archive-select-model?q=S8+&exact=1
Make sure you select the right phone model and in the filter section select region (and carrier) to refine search.
Note: This will replace twrp with stock recovery and also use latest Odin 3.13.m
spawnlives said:
Not sure if it will help if you can't boot into phone but in twrp have you tried a factory reset to see if it fixes issue or if you have a backup you could try and restore your phone from that.
If not and since don't know what version you were on before you will have to find the latest firmware for your region (and carrier).
Firmware name will look this(depending on your model)
Example.: G955FXXU2CRF7 the number 2 (5th from the right) will be the bootloader version number. The higher the number the latest released firmware.
I normally use updato.com for my firmware but you could use sammobil or samfirm.
https://updato.com/firmware-archive-select-model?q=S8+&exact=1
Make sure you select the right phone model and in the filter section select region (and carrier) to refine search.
Note: This will replace twrp with stock recovery and also use latest Odin 3.13.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
spawnlives said:
Not sure if it will help if you can't boot into phone but in twrp have you tried a factory reset to see if it fixes issue or if you have a backup you could try and restore your phone from that.
If not and since don't know what version you were on before you will have to find the latest firmware for your region (and carrier).
Firmware name will look this(depending on your model)
Example.: G955FXXU2CRF7 the number 2 (5th from the right) will be the bootloader version number. The higher the number the latest released firmware.
I normally use updato.com for my firmware but you could use sammobil or samfirm.
https://updato.com/firmware-archive-select-model?q=S8+&exact=1
Make sure you select the right phone model and in the filter section select region (and carrier) to refine search.
Note: This will replace twrp with stock recovery and also use latest Odin 3.13.1
Click to expand...
Click to collapse
Hello, please my Verizon says SM-G955FXXU1AQH3 and it's android 7.0, and it's region BTU, that is United Kingdom. So please do I just need to download any latest firmware as in 9 Pie ROM firmwares of any BTU version?
Because I have tried to fine any update that match it as in something like " SM-G955F8AQH8 or something since binary 8 is the latest?.Because I have tried to fine any update that match it as in something like " SM-G955F8AQH8 or something since binary 8 is the latest?.
Hello, please my Verizon says SM-G955FXXU1AQH3 and it's android 7.0, and it's region BTU, that is United Kingdom. So please do I just need to download any latest firmware as in 9 Pie ROM firmwares of any BTU version?
Because I have tried to fine any update that match it as in something like " SM-G955F8AQH8 or something since binary 8 is the latest?.Because I have tried to fine any update that match it as in something like " SM-G955F8AQH8 or something since binary 8 is the latest?.
Elohim-Brown said:
Hello, please my Verizon says SM-G955FXXU1AQH3 and it's android 7.0, and it's region BTU, that is United Kingdom. So please do I just need to download any latest firmware as in 9 Pie ROM firmwares of any BTU version?
Because I have tried to fine any update that match it as in something like " SM-G955F8AQH8 or something since binary 8 is the latest?.Because I have tried to fine any update that match it as in something like " SM-G955F8AQH8 or something since binary 8 is the latest?.
Click to expand...
Click to collapse
Since your on android 7 with Binary ( bootloader ) no.1 you can flash any firmware you want ( within reason )
Just remember if you update bootloader versions you can't downgrade.
If you want the latest version for your device use this PC app
[Tool] Frija - Samsung firmware downloader/checker
* * * PLEASE UNDERSTAND WHAT YOU ARE INSTALLING TO YOUR DEVICES AT ALL TIMES AND ME AND THE DEVELOPER ARE NOT RESPONSIBLE FOR ANY SORT OF DAMAGE TO YOUR DEVICE * * * Hey Guys :) Frija is a new tool (successor of now depreciated tool SamFirm)...
forum.xda-developers.com
Download
extract firmware
flash with odin
spawnlives said:
Since your on android 7 with Binary ( bootloader ) no.1 you can flash any firmware you want ( within reason )
Just remember if you update bootloader versions you can't downgrade.
If you want the latest version for your device use this PC app
[Tool] Frija - Samsung firmware downloader/checker
* * * PLEASE UNDERSTAND WHAT YOU ARE INSTALLING TO YOUR DEVICES AT ALL TIMES AND ME AND THE DEVELOPER ARE NOT RESPONSIBLE FOR ANY SORT OF DAMAGE TO YOUR DEVICE * * * Hey Guys :) Frija is a new tool (successor of now depreciated tool SamFirm)...
forum.xda-developers.com
Download
extract firmware
flash with odin
Click to expand...
Click to collapse
Ok thanks alot, by the way, please how do I know the CSC form my phone, presently it kinda in a boot loop due to the Odin fail, it's shows "kernel rev check fail device 3 binary 1"
Because I kind of see something like CSC in the Fridja app?
Elohim-Brown said:
Ok thanks alot, by the way, please how do I know the CSC form my phone, presently it kinda in a boot loop due to the Odin fail, it's shows "kernel rev check fail device 3 binary 1"
Because I kind of see something like CSC in the Fridja app?
Click to expand...
Click to collapse
Device X Binary Y error means you are trying flash older firmware than what is on your phone.
You can't downgrade ( binary/bootloader ) versions.
Your CSC code will generally be the country/network of where you live and is represented as XXX
If going to use frija then enter model number ( eg: SM-G955F ) and csc XXX.
List Of Samsung CSC Codes | Samsung Firmware CSC Codes - Tsar3000
The Complete Updated List of Samsung CSC Codes, Including all Samsung CSC Codes for the USA, Canada, And Samsung Global CSC codes (UK, Singapore, Italy, ...)
tsar3000.com
spawnlives said:
Device X Binary Y error means you are trying flash older firmware than what is on your phone.
You can't downgrade ( binary/bootloader ) versions.
Your CSC code will generally be the country/network of where you live and is represented as XXX
If going to use frija then enter model number ( eg: SM-G955F ) and csc XXX.
List Of Samsung CSC Codes | Samsung Firmware CSC Codes - Tsar3000
The Complete Updated List of Samsung CSC Codes, Including all Samsung CSC Codes for the USA, Canada, And Samsung Global CSC codes (UK, Singapore, Italy, ...)
tsar3000.com
Click to expand...
Click to collapse
Thanks alot again, well, fridja just automatically filled it for me.
Elohim-Brown said:
Ok thanks alot, by the way, please how do I know the CSC form my phone, presently it kinda in a boot loop due to the Odin fail, it's shows "kernel rev check fail device 3 binary 1"
Because I kind of see something like CSC in the Fridja app?
Click to expand...
Click to collapse
It worked, thanks a lot. God bless you. I am so happy to be a part of this forum.
Hello everyone, I have another issue on my S9plus, I can't find the OEM unclock toggle in the device manager options,
It's SM-G965FXXXS7CSJ6
Any help?
Elohim-Brown said:
Hello everyone, I have another issue on my S9plus, I can't find the OEM unclock toggle in the device manager options,
It's SM-G965FXXXS7CSJ6
Any help?
Click to expand...
Click to collapse
have you waited 7 days without reboot?
No, do I have to change time and date to say 2016 and wait for seven days before I reboot?
No need to change time to 2016.
Hello,
I'm trying to fix my soft bricked phone with this error (no quotes):
"dm-verity verifiation failed..."
I've already soft and factory reset the phone to no avail, as it still will not boot past the Samsung logo. Googling the problem has told me that flashing the original firmware with Odin should fix it, but after hours of searching I still cannot determine what firmware I need to download and use. Reading some of the threads here supposedly i can use firmware that shares my carrier and country but I cannot find the correct combination on any site.
Country: US
Phone: S7 (G930F) - On the recovery mode screen the full designation is G930FXXU1BPH6
Carrier: T-Mobile
Version 6.0.1
Does anyone know exactly where I can find useable firmware for the phone? Everything I see online (like sammobile for example) just has the firmwares for other countries.
Before the bootlock my phone was rooted if it matters.
Vhozite said:
Hello,
I'm trying to fix my soft bricked phone with this error (no quotes):
"dm-verity verifiation failed..."
I've already soft and factory reset the phone to no avail, as it still will not boot past the Samsung logo. Googling the problem has told me that flashing the original firmware with Odin should fix it, but after hours of searching I still cannot determine what firmware I need to download and use. Reading some of the threads here supposedly i can use firmware that shares my carrier and country but I cannot find the correct combination on any site.
Country: US
Phone: S7 (G930F) - On the recovery mode screen the full designation is G930FXXU1BPH6
Carrier: T-Mobile
Version 6.0.1
Does anyone know exactly where I can find useable firmware for the phone? Everything I see online (like sammobile for example) just has the firmwares for other countries.
Before the bootlock my phone was rooted if it matters.
Click to expand...
Click to collapse
The G930F is a primarily European device, so a different region than the US.
The firmware version you have provided is an old version of Marshmallow on T Mobile Poland. The fact that it's Poland doesn't really matter it's still EU region.
Now heres the important part....T Mobile in Europe do not use all of the same bands as T Mobile US so although you can flash any firmware for Europe your phone will not work 100% in the US
So first of all flash with either a nougat firmware for United Kingdom T Mobile or Untied Kingdom nougat undranded (BTU). From Sammobile.
I don't advise going straight to Oreo because there may be a fix for older nougat firmware from EU region to work perfectly in US. Once you upgrade firmware you cannot downgrade.
Once your phone is up and running you just need to look on the forum of how to get a G930F device working perfect on US networks.
Hi all,
Yesterday I bought an S10e under the impression that it is sm-g970F.
Trying to flash Android 11 I discovered that it is actually sm-g970N.
Is there really a difference between them?
Should I be worried that some functions will be missing/unavailable?
Also, in the settings, it appears as g970F. How did the seller change it??
I have the same problem i tried to update the phone to the latest sm-g970f rom (figured if it's already installed it's possible)
And non of the roms flashed only when i decided to try latest sm-g970n rom it flashed however i bricked the phone and i have no idea what to do now.
almogkm said:
Hi all,
Yesterday I bought an S10e under the impression that it is sm-g970F.
Trying to flash Android 11 I discovered that it is actually sm-g970N.
Is there really a difference between them?
Should I be worried that some functions will be missing/unavailable?
Also, in the settings, it appears as g970F. How did the seller change it??
Click to expand...
Click to collapse
So after digging into the issue since i have the same problem here are my conclusions:
1. The phone is a Korean Variant G970N it is probably a renewed phone and not a new one.
apparently it's okay for an importer to take used phones (from Korea in this case) and replace all the cosmetics but of cause leaving the used MB.
Now here is what you should worry about, in order to flash the G970F Fixed Rom (there is no way you have updates) they used a Custom Kernel which means the phone was rooted and now Knox is tripped (this not reversible).
(Download Phone Info from play store and check knox if it shows 0x1 then your phone warrenty is void and some features won't be available any more for example - Samsung Pay).
So what should you do?
Well if you still have the option i would have demanded my money back!!
One thing that i am perplexed about is how in hell is this legal?!!!
If you no longer have this option or you want to keep the phone you have two option:
1. Flashing Korean Unbranded Firmware (KOO) which is pretty good it doesn't have bloatware or issues as far as i can tell, i only found one down side for it, the phone language selection is small but if you only need English (like any normal Human) then you are golden.
2. Keep the G970F ROM but bare in mind it will receive no updates and no security patches.
I am still looking for a proper way to flash G970F Firmware over G970N for now i haven't found any internet source that will confirm it's even possible.
So how did those importers\sellers did it, they probably flashed it with a Cellphone Lab Software (not Odin solution) and used a custom Kernel to fool Knox, like i said before this is practically a crime and i don't understand how can they sell used phones as new and get away with it!!!!
I had the same suspicions....
I'll try going to the lab that sold the previous owner the device and deal with them tho it looks like I just got scammed...
Sorry to bring this up again but I've just had an idea following JerryRigEverything's video:
What if I transplant SM-G970F components from a broken device that no longer works or in use in my SM-G970N which is supposedly new.
My N device is now bricked for some reason I couldn't solve, though my suspicion is that it has to do with incompatibility with the SIM card I use.
When my device did work, it worked great! ...besides battery issues that are most likely a result of the incompatibility aforementioned.
Will this work? If so, what components do I need? I already know I'll need the logic board but as seen in the video, there are several more antennas, should I just copy what Jerry did?
Vegetto32 said:
I have the same problem i tried to update the phone to the latest sm-g970f rom (figured if it's already installed it's possible)
And non of the roms flashed only when i decided to try latest sm-g970n rom it flashed however i bricked the phone and i have no idea what to do now.
Click to expand...
Click to collapse
Hi Vegetto,
I am from India and buy a galaxy S10e from UAE, It is showing G970F in the Phone's about but the problem is It is a G960N. Now, When I see in Sam Phone Info app there is Bootloader version - G970N, PDA Version - G970F, CSC G970F.
It is also a Knox tripped phone. Knox 0/1.
But if I see in Samsung code by typing in keypad *#12580*369#
it showing like all option in Odin:
BL: G970F
AP: G970F
CP: G970F
CSC: G970F
Does this means I can flash new Firmware on the list of SAM Mobile website, with G970F series firmware, It also showing in SAM Phone Info App that there latest firmware G970FXXSEFUL1/G970FOXMEFUJ2/G970FXXSEFUJ2.
I am in India right now.
Please help me, My email Id is -- [email protected]
It actually means you cannot flash SM-G970F the only roms you can flash are G970N.
Also if you want the phone to get security updates you must flash the original phones bootloader version, my suggestion download the G970N KOO firmware it's a global firmware. As for the knox it is tripped and there is nothing you can do about it.
Vegetto32 said:
It actually means you cannot flash SM-G970F the only roms you can flash are G970N.
Also if you want the phone to get security updates you must flash the original phones bootloader version, my suggestion download the G970N KOO firmware it's a global firmware. As for the knox it is tripped and there is nothing you can do about it.
Click to expand...
Click to collapse
How can I flash the original phone's bootloader version?
Where from I can download the original phone's G970N KOO Firmware and is it official Samsung Firmware?
How are they able to flash G970F? Is it custom Rom or do they use the original one?
I searched that my phone is using G970FXXS4BTB3 firmware which Vietnam XXV and same number found at https://www.sammobile.com/samsung/galaxy-s10e/firmware/SM-G970F/XXV/download/G970FXXS4BTB3/322678/ in an old update in 2020.
So see the attached screenshot, can I flash its latest version with odin. Of course, there is a chinese written in recovery mode installed when I go to its recovery mode for flashing with Odin.
I have a similar problem right now on my Korean S10E. Device is SM-G970N. I need it to be in Turkish. Only Themes item in Settings is in Turkish- very interesting- The rest is in English. App names are mostly Turkish Settings app name is in English.
The bootloader is unlocked but the phone is not rooted, Knox seems not tampered.
Could not start OTA update at first, I have upgraded a few versions from PC via Smartswitch. Just then noticed OTA also started downloading. The rest of the updates went on from the phone until upgrading to 12, there was a message like "All of the updates were not succesful." OTA update no longer responded. This time I turned back to Smart Switch. Update finished this time and finally I am at the latest version.
I only need Turkish in Settings. I used some ADB commands and an app called MoreLocale2. It did not work either. This has to be simple. Turkish exists. Keyboard is Turkish but not Settings. Quick links and most other things are strangely mixed English and Turkish.
How can I enable full Turkish?