Database Info

Not to flash Samsung Galaxy S6 via Odin

Hello
I have the official version of Android 5.1.1 SK region and would like to upload Officiální Android version 5.1.1 CZ region. Flash Odin FAIL. Please someone help? Thank you.

JABV90 said:
Hello
I have the official version of Android 5.1.1 SK region and would like to upload Officiální Android version 5.1.1 CZ region. Flash Odin FAIL. Please someone help? Thank you.
Click to expand...
Click to collapse
Had a similar issue yesterday when I tried to update my rooted 5.0.2 to an official 5.1.1. I have used ODIN many times before since SGS3, and back then you were able to mix your system image from other regions, but that apparantly has been locked down by Samsung. Now you can only update an official version of the rom if it exactly matches your existing region. Because you updated your SK international S6 and tried a region set rom from Czech it most likely failed towards the very end of flash with "FAIL".
Your options are: 1) you download the 5.1.1 version for your region in ODIN format from SAMMobile or 2) you use Smart Switch and let it do it for you - in this case you will need to know the SN of your phone as it is used for verification.

Samsung has locked down the serial number with the regions that come with it. So if you have to install, you should update it or use same region odin file. There is a way to break this chain if you are rooted and some additional files are being used in the odin but I am not completely sure as I have not tried it yet. But there are chances that you may void your warranty if you try that or the worse hard brick as it can sometimes change your serial number if not used properly. but I wouldn recommend that. I'll let you know once I understand the usage correctly.

Successful flash of SM-G920F - Anyone

OK, no matter what method I try I am unable to achieve a successful flash of my phone. I have tried it via odin with many different firmware versions but all seem to fail almost immediately. The only way to resolve this is to use samsung switch and reset phone to stock. The problem is stock firmware is german vodafone full of vodafone bloatware, I want to get rid of it and flash a UK unbranded firmware but no matter what I do I am unable to achieve this. I can see from the forum that there are many people out there with the same flashing problem but with no real responses on how to achieve the goal. There must be people out there that have achieved this task but don't seem to be offering up much help?

ok
sinbrad said:
OK, no matter what method I try I am unable to achieve a successful flash of my phone. I have tried it via odin with many different firmware versions but all seem to fail almost immediately. The only way to resolve this is to use samsung switch and reset phone to stock. The problem is stock firmware is german vodafone full of vodafone bloatware, I want to get rid of it and flash a UK unbranded firmware but no matter what I do I am unable to achieve this. I can see from the forum that there are many people out there with the same flashing problem but with no real responses on how to achieve the goal. There must be people out there that have achieved this task but don't seem to be offering up much help?
Click to expand...
Click to collapse
Is your phone international unlocked out of the box? I dont believe it was, because as far as I've read international unlocked phones come with "unbranded" firmware. The unlocked ones I know can be pretty much flashed with "any" international firmware, which is what you are trying to do.
If you dont know for sure. Odin the stock German Vodaphone. Let the phone boot. Boot back to stock recovery, then factory reset and clear cache.
Then let the phone boot...Download phone info app by vndnguyen (free version is fine)...Open the app, go to CSC Code tab. Then that will tell you the active CSC code and your firmware CSC code...you are looking for the line that says Available CSC Codes. If it only lists German Vodaphone (VD2), then I believe you are stuck til the phone is unlocked.
Anyone, jump in here if I'm mistaken. I am using this as reference as, I've checked my G920F. Mine is unlocked tho and I can flash any firmware from any region with no problem. Hopefully I've answered your question.

I had no luck with the firmwares on the firmware page either.
If you are on OI9 check http://forum.xda-developers.com/galaxy-s6/general/guide-android-6-0-marshmallow-beta-how-t3277533
And try flashing the first stock firmware https://drive.google.com/folderview...sharing&tid=0B40ItdHKfkyQd1hJQXVDU3dDU2c#list (not the android M one!) via ODIN.
Basic process is:
Download the above file, extract, there should be 4 files inside (AP,BL,CP,CSC), simply select each one to go in the relevant box on ODIN, then go into download mode on your phone and click start...
N.B. Be aware that the above firmware contains a PIT file which will reformat and resize the partitions on your phone, so make sure you have a copy of the stock firmware that works before trying the flash (i.e. the one which Smart Switch downloads). You can grab it from your windows %TEMP% directory during the smart switch download (it first downloads a file to TMPxxx, then extracts it into a directory of the same name, its these files you want. They should be the four files beginning with the type of ODIN file you are flashing (AP,BL,CP,CSC). The files get deleted after the firmware has flashed so make sure you watch the process. If things go wrong you can re-flash these files via ODIN

As far as I was led to believe and when I purchased the phone it did state factory unlocked. I was able to put in any sim when I received it and didn't have to go through any aftermarket unlock process?

I have the same problem i have a unlocked G-920F with egyptian CSC and firmware 5.1.1 .when i try to flash BTU 5.1.1 via odin, i have the same problem and only way to recover is via smart switch.BTU firmware is from sammobile

abdussamad said:
I have the same problem i have a unlocked G-920F with egyptian CSC and firmware 5.1.1 .when i try to flash BTU 5.1.1 via odin, i have the same problem and only way to recover is via smart switch.BTU firmware is from sammobile
Click to expand...
Click to collapse
So, seems this is not uncommon?

ok the way to do it is download this file
https://drive.google.com/folderview...sharing&tid=0B40ItdHKfkyQd1hJQXVDU3dDU2c#list
its BTU firmware of 5.1.1
and flash this firmware you'll have 4 files AP,BL,CP,CSC,put it in the respective boxes in odin.I have tested this right now and it works
Press "thanks" if i have helped

Well downloaded the app for CSC info and it states available CSC codes are...
ATL, AVF, CNX, CYV, MOB, MTL, OMN, SIM, SWC, TCL, VD2, VDC, VDF, VDH, VDI, VGR, VIP & VOD
Any ideas?

Ok, tried to get stock firmware when samsung smart switch was downloading and installing but couldn't see where the firmware was being downloaded to? Tried windows temp etc but nothing appeared during download and install?

sinbrad said:
Ok, tried to get stock firmware when samsung smart switch was downloading and installing but couldn't see where the firmware was being downloaded to? Tried windows temp etc but nothing appeared during download and install?
Click to expand...
Click to collapse
Just type in %TEMP% into you windows explorer address bar and it will take you there. arrange by date modified and you will see the size ticking up during the download, before the flash starts it will extract into a folder with the same name, the md5 files can be grabbed from there

No probs here
abdussamad said:
I have the same problem i have a unlocked G-920F with egyptian CSC and firmware 5.1.1 .when i try to flash BTU 5.1.1 via odin, i have the same problem and only way to recover is via smart switch.BTU firmware is from sammobile
Click to expand...
Click to collapse
I flashed BTU firmware on my 920F international unlocked that came with UAE firmware without any problems. Idk

sd_N said:
I flashed BTU firmware on my 920F international unlocked that came with UAE firmware without any problems. Idk
Click to expand...
Click to collapse
Which file and which method?

aaronjp said:
Just type in %TEMP% into you windows explorer address bar and it will take you there. arrange by date modified and you will see the size ticking up during the download, before the flash starts it will extract into a folder with the same name, the md5 files can be grabbed from there
Click to expand...
Click to collapse
Ok, Got it this time, all four files. Will give the method above a go and if it fails at least I've got the stock firmware to fall back on?

Magic, have had great success. Now on the BTU firmware and everything is up and running. Got the stock as well just in case but if this continues to work won't be reinstalling stock. So a big thanks to those who helped

sinbrad said:
Magic, have had great success. Now on the BTU firmware and everything is up and running. Got the stock as well just in case but if this continues to work won't be reinstalling stock. So a big thanks to those who helped
Click to expand...
Click to collapse
Glad you are sorted

Not receiving OTA updates

I have got an unlocked Galaxy S7 (G930F) and have flashed the android nougat update (BTU - UK - 7.0). It is working fine.
Since I have updated to nougat, there are some updates released (bug fixes, I can confirm this on sammobile site) but are not available when I check for the updates in settings.
Any idea on what this issue might be.

If you have either root or custom recovery you can't receive OTAs but you can update using SmartSwitch on your PC

kamranali44 said:
I have got an unlocked Galaxy S7 (G930F) and have flashed the android nougat update (BTU - UK - 7.0). It is working fine.
Since I have updated to nougat, there are some updates released (bug fixes, I can confirm this on sammobile site) but are not available when I check for the updates in settings.
Any idea on what this issue might be.
Click to expand...
Click to collapse
hi mate
Updates ( if you are not rooted) are CSC carrier dependent , if your carrier or CSC do not issue any updates ...you will not have them.
When you checked in sammobile you checked if your carrier / CSC had updates?

No updates on Smart switch
userName'dYa said:
If you have either root or custom recovery you can't receive OTAs but you can update using SmartSwitch on your PC
Click to expand...
Click to collapse
I do not have root or custom recovery. I have downloaded the firmware from sammobile and checked that the knox warranty is not tripped over and the device status is still official.

MAX 404 said:
hi mate
Updates ( if you are not rooted) are CSC carrier dependent , if your carrier or CSC do not issue any updates ...you will not have them.
When you checked in sammobile you checked if your carrier / CSC had updates?
Click to expand...
Click to collapse
The BTU firmwares in the UK are not network dependent as far as I know and they come installed in unlocked devices with no network bloatware.
I do remember flashing the CSC (G930FOXA1DPLT - that's the current one) which came with the BTU firmware. The new CSC has updates (G930FOXA1DQB1).
Am I missing something or is the device still dependent on a network to approve this.

Do you get any error?

userName'dYa said:
Do you get any error?
Click to expand...
Click to collapse
No, it says "the latest updates have already been installed "
I even had this issue on Android 6 so I downloaded the Android 7 and flashed it via odin. Now there are updates but I would like to get the OTA to update it.

kamranali44 said:
No, it says "the latest updates have already been installed "
I even had this issue on Android 6 so I downloaded the Android 7 and flashed it via odin. Now there are updates but I would like to get the OTA to update it.
Click to expand...
Click to collapse
Are these bug fixes for the country AND the carrier you are using

userName'dYa said:
Are these bug fixes for the country AND the carrier you are using
Click to expand...
Click to collapse
Yes the bug fixes are for this country (UK).
I am not sure if they are carrier dependent as it is an unlocked software (I am on O2 and there is a different firmware for O2 locked devices).
Are they still carrier dependent is the phone is unlocked?

kamranali44 said:
Yes the bug fixes are for this country (UK).
I am not sure if they are carrier dependent as it is an unlocked software (I am on O2 and there is a different firmware for O2 locked devices).
Are they still carrier dependent is the phone is unlocked?
Click to expand...
Click to collapse
Yes the carrier matters even for unlocked phones

userName'dYa said:
Yes the carrier matters even for unlocked phones
Click to expand...
Click to collapse
Okay, in this case I think I will have to wait for O2 to approve them.
I thought the idea of having an unlocked phone from samsung is to use any sim and get updates directly from Samsung when they release it.

kamranali44 said:
The BTU firmwares in the UK are not network dependent as far as I know and they come installed in unlocked devices with no network bloatware.
I do remember flashing the CSC (G930FOXA1DPLT - that's the current one) which came with the BTU firmware. The new CSC has updates (G930FOXA1DQB1).
Am I missing something or is the device still dependent on a network to approve this.
Click to expand...
Click to collapse
Hi
You get updates either by the carrier or by the CSC , in your case you have an unbranded firmware , BTU, so no carrier updates...you will get an update only when an update for BTU unbranded firmware is release it , independently if there are other firmwares newer than yours around....only way to keep updated to the latests is flashing it yourself any new release , check this thread if you deciede to go that way

Try to get your CSC code by installing Phone Info from the market : I too have flashed the first official Nougat BTU UK 7.0 firmware with Odin, with a complete reset of the phone, but in my case I still have CSC = ITV and not BTU.
This seems to prevent us from getting the new OTA update : somewhere I've read that after the Odin procedure I should have entered recovery and factory reset the phone from there to get the CSV changed to BTU as the installed firmware is a "multi-csc" variant.
We still can download today's new firmware from SamMobile and use home_csc to avoid resetting again the phone.
Hope someone more expert than me can confirm/correct my statements
Inviato dal mio SM-G930F utilizzando Tapatalk

I was wondering the same and SergioA is right. I still have the DBT CSC although I was flashing the BTU Firmware. Thanks for clarification

userName'dYa said:
Yes the carrier matters even for unlocked phones
Click to expand...
Click to collapse
So my S7(Sprint) running on G930U firmware will go back to Sprint Nougat firmware full of bloatware?

MAX 404 said:
Hi
You get updates either by the carrier or by the CSC , in your case you have an unbranded firmware , BTU, so no carrier updates...you will get an update only when an update for BTU unbranded firmware is release it , independently if there are other firmwares newer than yours around....only way to keep updated to the latests is flashing it yourself any new release , check this thread if you deciede to go that way
Click to expand...
Click to collapse
The BTU has a firmware update available on sammobile but not it's not OTA update on my phone.
What if I download the new update and flash it via odin with HOME_CSC file added. Will it start the updates by carrrier?

SergioA said:
Try to get your CSC code by installing Phone Info from the market : I too have flashed the first official Nougat BTU UK 7.0 firmware with Odin, with a complete reset of the phone, but in my case I still have CSC = ITV and not BTU.
This seems to prevent us from getting the new OTA update : somewhere I've read that after the Odin procedure I should have entered recovery and factory reset the phone from there to get the CSV changed to BTU as the installed firmware is a "multi-csc" variant.
We still can download today's new firmware from SamMobile and use home_csc to avoid resetting again the phone.
Hope someone more expert than me can confirm/correct my statements
Inviato dal mio SM-G930F utilizzando Tapatalk
Click to expand...
Click to collapse
My S7 DUOS FD and my wife's S7 F both recieved the Nougat OTA update DQB1 today, mine was originally CSC XSG (UAE) and mi wife's was CSC TTT (Trinidad And Tobago), and both were updated to CSC BTU Nougat Final release, changing the CSC to BTU (this will wipe out your memory in the process but for a newer OS version it is recommended). I had doubts about getting any OTA updates since my S7 is the FD version which does not exists as a BTU phone originally, but in the end I got the update.
Long story short, if you want to recieve OTA updates after sideloading firmware with ODIN with a different CSC, you should fully convert to that new CSC, otherwise you won't get the OTA's.

kamranali44 said:
The BTU has a firmware update available on sammobile but not it's not OTA update on my phone.
What if I download the new update and flash it via odin with HOME_CSC file added. Will it start the updates by carrrier?
Click to expand...
Click to collapse
Hi
if you have a DPLT firmware you should get it soon.....unless your system by some reason is not set as original ( even if knox is tripped but your system is set as original you will get it) anyhow is faster if you download it yourself and flash it , use home_csc so you will not factory reset your phone , NOTE: has to be the same home_csc that you have in your phone right now , not any home_csc for example:
Lets say you want to flash the latest firmware and it happens to be from France and you do not want to loose any of your apps , config or data
1 find out what CSC is installed in your phone ( phoneinfo app is great for that) in your case BTU
2 download the latest possible firmware for your CSC and extract from it the home_csc file , save it , discard the rest
3 download the latest firmware available , in our example France , extract from it download the MAIN-file and extract AP BL & CP save it , discard the other 2 files ( home_csc and CSC from France firmware
4 now take AP BL & CP from the latest firmware ( in our example France) and take the home_csc from a BTU firmware ( why , because is the CSC installed in your phone) and flash the together
In that way you can always have the latest in your phone without waiting for it , phone will not be knox tripped , will be 100%official as is all official firmware

If your using the btu version for UK phones, then how did you manage not to brick your phone? The UK phones do not have snapdragon, they have the Samsung chips.

MAX 404 said:
Hi
if you have a DPLT firmware you should get it soon.....unless your system by some reason is not set as original ( even if knox is tripped but your system is set as original you will get it) anyhow is faster if you download it yourself and flash it , use home_csc so you will not factory reset your phone , NOTE: has to be the same home_csc that you have in your phone right now , not any home_csc for example:
Lets say you want to flash the latest firmware and it happens to be from France and you do not want to loose any of your apps , config or data
1 find out what CSC is installed in your phone ( phoneinfo app is great for that) in your case BTU
2 download the latest possible firmware for your CSC and extract from it the home_csc file , save it , discard the rest
3 download the latest firmware available , in our example France , extract from it download the MAIN-file and extract AP BL & CP save it , discard the other 2 files ( home_csc and CSC from France firmware
4 now take AP BL & CP from the latest firmware ( in our example France) and take the home_csc from a BTU firmware ( why , because is the CSC installed in your phone) and flash the together
In that way you can always have the latest in your phone without waiting for it , phone will not be knox tripped , will be 100%official as is all official firmware
Click to expand...
Click to collapse
Thank you, you are a hero :good:. I did update via odin and installed it without losing any data.
As I have said I have previously (about a week ago) used the CSC file rather than HOME_CSC.
I have the Phone Info app, The Orignal CSC code is blank(is it normal?), Does this look normal as I have not checked the CSC before updating to android nougat. I have added a screenshot of it.

Flashing Stock Firmware Failed

I have the SM-G955F.
I flashed TWRP using the instructions on here and everything worked perfectly fine. I even booted back into the stock OS - however, the Magisk app was not there.
I was going to boot back into TWRP when I got the message "Only official released binaries are allowed to be flashed" and went into a bootloop.
Then I followed the instructions to flash the stock firmware back on to my S8+, but it failed. Can someone point me in the right direction please?
I used Odin3_v3.13.1. I have attached 2 pictures to show the error.

negative_silent said:
I have the SM-G955F.
I flashed TWRP using the instructions on here and everything worked perfectly fine. I even booted back into the stock OS - however, the Magisk app was not there.
I was going to boot back into TWRP when I got the message "Only official released binaries are allowed to be flashed" and went into a bootloop.
Then I followed the instructions to flash the stock firmware back on to my S8+, but it failed. Can someone point me in the right direction please?
I used Odin3_v3.13.1. I have attached 2 pictures to show the error.
Click to expand...
Click to collapse
Sounds like you are trying flash older firmware than what is on your phone. Odin saying you are flashing firmware with bootloader ver 3. Download mode saying you have ver 4 bootloader. You will need latest version of firmware with ver 4 bootloader or higher and flash with Odin.
Bootloader version number is 5th number from right of firmware name.

spawnlives said:
Sounds like you are trying flash older firmware than what is on your phone. Odin saying you are flashing firmware with bootloader ver 3. Download mode saying you have ver 4 bootloader. You will need latest version of firmware with ver 4 bootloader or higher and flash with Odin.
Bootloader version number is 5th number from right of firmware name.
Click to expand...
Click to collapse
Thanks so much for responding. So from my reading and researching, I figured that was the case. However, I could only find the the official firmwares from here:
https://forum.xda-developers.com/galaxy-s8+/development/rom-galaxy-s8-t3749444
Which happens to be v3 bootloaders. Is there any specific v4 bootloader that I should be flashing? I am at my wits end here. I followed all the instructions perfectly...
I read that everything works fine until reboot then you get the "Only official released binaries are allowed to be flashed"
https://forum.xda-developers.com/galaxy-s8/how-to/guide-how-to-root-galaxy-s8-crgh-rom-t3846009
Any help would be greatly appreciated.

negative_silent said:
Thanks so much for responding. So from my reading and researching, I figured that was the case. However, I could only find the the official firmwares from here:
https://forum.xda-developers.com/galaxy-s8+/development/rom-galaxy-s8-t3749444
Which happens to be v3 bootloaders. Is there any specific v4 bootloader that I should be flashing? I am at my wits end here. I followed all the instructions perfectly...
I read that everything works fine until reboot then you get the "Only official released binaries are allowed to be flashed"
https://forum.xda-developers.com/galaxy-s8/how-to/guide-how-to-root-galaxy-s8-crgh-rom-t3846009
Any help would be greatly appreciated.
Click to expand...
Click to collapse
Firmware can be download from sammobil or updato and flashed with odin
https://www.sammobile.com/firmwares/
https://updato.com/firmware-archive-select-model
Select phone model then search for firmware for your region ( and carrier ).
Only official binary error is probably due to your rmm state being in prernormal state which means if you unlock your bootloader ( oem ) and reboot it will relock bootloader causing this message.
Reflash firmware to get phone running again.
Have a read through this guide for more info about rmm state
https://forum.xda-developers.com/sa...w-to/guide-root-install-twrp-samsung-t3747535

spawnlives said:
Firmware can be download from sammobil or updato and flashed with odin
https://www.sammobile.com/firmwares/
https://updato.com/firmware-archive-select-model
Select phone model then search for firmware for your region ( and carrier ).
Only official binary error is probably due to your rmm state being in prernormal state which means if you unlock your bootloader ( oem ) and reboot it will relock bootloader causing this message.
Reflash firmware to get phone running again.
Have a read through this guide for more info about rmm state
https://forum.xda-developers.com/sa...w-to/guide-root-install-twrp-samsung-t3747535
Click to expand...
Click to collapse
Thank you for the links. I can't tell you how much I appreciate you helping me out.
I bought the phone from eBay, it's a SM-G955F - as for the region and carrier, I live in United States using AT&T. My primary reason getting the international version is to install a custom ROM on it. Is there a specific firmware for my region (U.S.) and carrier (AT&T) that I should flash? I don't see it US listed.
Also, using the guide I mentioned above, I did flash the RMM bypass, however, it was not the version 2, found in the guide you posted. Is that where I messed up?

negative_silent said:
Thank you for the links. I can't tell you how much I appreciate you helping me out.
I bought the phone from eBay, it's a SM-G955F - as for the region and carrier, I live in United States using AT&T. My primary reason getting the international version is to install a custom ROM on it. Is there a specific firmware for my region (U.S.) and carrier (AT&T) that I should flash? I don't see it US listed.
Also, using the guide I mentioned above, I did flash the RMM bypass, however, it was not the version 2, found in the guide you posted. Is that where I messed up?
Click to expand...
Click to collapse
I don't live in the US but there should be filters on the websites to filter by region. I normally use updato and firmware for your region shows up under U.S.A it will show you all your carrier's like at&t, Sprint, t-mobile and non carrier firmware.
As for the rmm zip version 2 may have been better it is more up to date and is smaller in size. Both should do the same job though.

spawnlives said:
I don't live in the US but there should be filters on the websites to filter by region. I normally use updato and firmware for your region shows up under U.S.A it will show you all your carrier's like at&t, Sprint, t-mobile and non carrier firmware.
As for the rmm zip version 2 may have been better it is more up to date and is smaller in size. Both should do the same job though.
Click to expand...
Click to collapse
I looked on updato and sammobile, both do not have USA region. Can I flash firmware from another region and still get it to work on my carrier?
For example, can I flash U.K. (Vodafone) since its on ver 4 firmware and uses GSM - regardless of region and carrier?

negative_silent said:
I looked on updato and sammobile, both do not have USA region. Can I flash firmware from another region and still get it to work on my carrier?
For example, can I flash U.K. (Vodafone) since its on ver 4 firmware and uses GSM - regardless of region and carrier?
Click to expand...
Click to collapse
Just doubled checked saw you have the f series while updato has u1 version firmware that I can see.
You can flash firmware from the UK if you want but can't say for certain you will have full network capabilities due to the difference in region and carriers ( network capabilities ). I would try and find an unbranded version ( non carrier branded) firmware first if not then something like Vodafone .

There is a simple reason for this. If you came from TWRP as "reboot to download", this creates the problem. Turn off the phone. Go to download mode with Vol_Down+Bixby+Power and then press Vol_Up button. When I enter download mode like this, it flashes without any problems.

How To Guide F711U and F711U1 Firmware Links and Flashing Discussion Here

(WIP, files are currently processing and uploading)
For those who aren't already aware, F711U is the model number of all of the US carrier versions of the Z Flip3. The F711U1 is the model number of the same device, but sold by Samsung SIM unlocked and with no carrier bloatware. Firmware is 100% interchangeable among these models: any U or U1 firmware version can be flashed to any U or U1 device at any time, assuming that you're not trying to downgrade the bootloader. A "U to U" or "U1 to U1" flash does not require a factory reset, but changing from one firmware to the other will require one. Also, U firmware is identical for the 4 base files (AP, BL, CP, CSC) for each individual build, no matter which carrier it comes from. So if you download 2 different carrier versions of the exact same build, the 4 base files will be identical. Where the firmware differs is in the USERDATA file - that's where the carrier bloatware and customizations reside.
Manual Odin flashing is designed for those who:
- want to manually update to a newer version of U firmware on their U device, either because they don't want to wait for their carrier's OTA or because OTAs aren't working on their device, or a different carrier got a new feature/patch before they did
- want to flash U1 firmware to their U device
- want to convert from U1 firmware to carrier U firmware
- want to convert from one carrier's U firmware (with all apps and bloatware) to a different carrier's U firmware (with all apps and bloatware)
For those who aren't already aware, anyone can now download firmware for almost any Samsung device any time that they want, via the various firmware download tools posted here on XDA like SamFirm or Frija. There are threads and info about them here on XDA so I won't waste time explaining - do a search if you're not already familiar with these tools. But they only provide whatever the latest/newest/current version is - nothing older. I have access to an internal Samsung firmware download tool that usually gets new versions before they hit the public firmware download tools, so that's where my files come from.
This is not a "beginner's guide to Odin flashing" -type post/thread, so I won't list basic, step-by-step flashing instructions. My threads are geared towards those who already know what they're doing. If you're new to manually flashing Samsung firmware (or haven't done it in a long time), I recommend you consult one of those "beginner's" guides- there are tons of them here on XDA.
Happy flashing!
U firmware: https://www.androidfilehost.com/?w=files&flid=327752
U1 firmware: https://www.androidfilehost.com/?w=files&flid=327753
Notes:
- DON'T QUOTE THE OP WHEN YOU REPLY, kthx
- I have lots of threads just like this one for other Samsung flagships, if it interests you. For those who have already made use of my previous threads for a different device and are upgrading, welcome back
- My zips are compressed extra small for space and bandwidth savings. The default Windows extractor can't handle it, so you'll need a 3rd party tool like 7zip, WinRAR, etc
- it's quite time consuming to download the files, zip them up, and upload them to AFH. And, I do threads like this for every single flagship model, so I won't be uploading every single version. The only full builds that I upload are ones where I get access to a new bootloader and/or Android version early, before they hit the firmware download tools.
- My naming method for folders on AFH is: build - bootloader - Android version
So "SAT - 1 - 9.0" means the full build number ends in SAT, it's bootloader version 1, and it's Android 9.0. When bootloader and Android versions increment, the first build to have those changes will have its folder notated appropriately.
- HOME CSC file keeps data intact; using the other CSC will wipe data. Flashing USERDATA will also wipe data.
- Since AT&T doesn't allow their firmware to be publicly available (for any of their devices), I'll try to always upload at least one USERDATA per bootloader increment for AT&T (and Cricket, if they get this model). I'll also upload any full builds if AT&T is the only carrier to get that specific build, because you won't be able to find the files anywhere else.
- For identifying USERDATAS, and to know what region/CSC to use in the firmware download tools if you're downloading yourself:
AIO = Cricket (not available via firmware download tools)
ATT = AT&T (not available via firmware download tools)
BST = Boost Mobile
CCT = Xfinity Mobile (Comcast)
CHA = Spectrum Mobile (Charter)
DSH = Dish Network
TMB = T-Mobile
TMK = Metro PCS
USC = US Cellular
VZW = Verizon (available via firmware download tools, but Manual Entry is required - Auto will not work)
XAA = U1 firmware

Flashed a physical T-Mobile F711U to a F711U1 XAA firmware using Odin(Can't stand the bright pink boot up animations).
Flash worked perfectly. But, when I tried to test doing an update from Google settings it failed every time with "Registration Failed". I flashed the device back to the T-Mobile F711U firmware and was able to update without issue.
Not sure if you ran into this issue, but it's worth noting you might not be able to update the phone if the carriers are checking the Firmware.
Edit: Also forgot to mention, had to use the patched Odin due to the Firmware Model mismatch. Phone does work properly though.

nwb_sam said:
Flashed a physical T-Mobile F711U to a F711U1 XAA firmware using Odin(Can't stand the bright pink boot up animations).
Flash worked perfectly. But, when I tried to test doing an update from Google settings it failed every time with "Registration Failed". I flashed the device back to the T-Mobile F711U firmware and was able to update without issue.
Not sure if you ran into this issue, but it's worth noting you might not be able to update the phone if the carriers are checking the Firmware.
Edit: Also forgot to mention, had to use the patched Odin due to the Firmware Model mismatch. Phone does work properly though.
Click to expand...
Click to collapse
What do you mean by "doing an update from Google settings"?
What type of update? What "Google settings" exactly?

iBowToAndroid said:
What do you mean by "doing an update from Google settings"?
What type of update? What "Google settings" exactly?
Click to expand...
Click to collapse
From "Settings" App > "Software Update" > "Download and Install" and pressing the "Download and Installing.
I get "Connecting to server" and then immediately "Registration Failed" I've attempted over Wi-Fi and with that option toggled off.
This could also be the phone is new and T-Mobile doesn't have the F711U1 XAA firmware at their carrier level, but the registration failed annoys me. On F711U (official T-Mobile firmware) I simply get a notification that the device is up to date.

nwb_sam said:
From "Settings" App > "Software Update" > "Download and Install" and pressing the "Download and Installing.
I get "Connecting to server" and then immediately "Registration Failed" I've attempted over Wi-Fi and with that option toggled off.
This could also be the phone is new and T-Mobile doesn't have the F711U1 XAA firmware at their carrier level, but the registration failed annoys me. On F711U (official T-Mobile firmware) I simply get a notification that the device is up to date.
Click to expand...
Click to collapse
Which F711U1 version did you flash?

iBowToAndroid said:
Which F711U1 version did you flash?
Click to expand...
Click to collapse
I flashed my phone using the F711U1OYM1AUG7 (F711U1 XAA) firmware from sammobile.
I flashed it back to the T-Mobile firmware, (F711UOYN1AUGB (F711U TMB) and the issue went away.
I did flash it again to the XAA to confirm the problem this evening. Never retained data during the process. Factory reset and removed my account information (Google and Samsung) before updating the firmware each time.
I've done this on a few phones in the past. If I'm making a blunder in the process causing this then I'm truly sorry for wasting anyone's time.
Edit: Typo

nwb_sam said:
I flashed my phone using the F711U1OYM1AUG7 (F711U1 XAA) firmware from sammobile.
I flashed it back to the T-Mobile firmware, (F711UOYN1AUGB (F711U TMB) and the issue went away.
I did flash it again to the XAA to confirm the problem this evening. Never retained data during the process. Factory reset and removed my account information (Google and Samsung) before updating the firmware each time.
I've done this on a few phones in the past. If I'm making a blunder in the process causing this then I'm truly sorry for wasting anyone's time.
Edit: Typo
Click to expand...
Click to collapse
Well UG7 is the latest that's available. So yes, I would expect you to get an error.
Once an update is available, if the phone is still giving the same error, then you can worry about it

Hello, well from my understanding Xfinity is bootloader unlockable after 60days and fully played for. I am wondering if anyone is planning on making a thread for Xfinity specifically. Or want too work with me on One. Sorry too spam or thread. But if u are familiar with how rom building, and flashing was with any other recent samsung model/Xfinity/bootloader unlock. It would be highly appreciated too know your experience.

jokono421 said:
Hello, well from my understanding Xfinity is bootloader unlockable
Click to expand...
Click to collapse
Incorrect. No US models of any Samsung device have been user-unlockable for years now, dating back to the S7

iBowToAndroid said:
Incorrect. No US models of any Samsung device have been user-unlockable for years now, dating back to the S7
Click to expand...
Click to collapse
I think network unlock got mixed up with bootloader unlock. You can unlock the phones for use with another carrier after X days and completed payment.

twistedumbrella said:
I think network unlock got mixed up with bootloader unlock. You can unlock the phones for use with another carrier after X days and completed payment.
Click to expand...
Click to collapse
Probably so

Can someone locate the thom browne fimware please?

blkghost22 said:
Can someone locate the thom browne fimware please?
Click to expand...
Click to collapse
Well normally I would say that you can get it yourself from the various firmware download tools like SamFirm or Frija. But it looks like Samsung changed something over the weekend, as the current versions of the tools are failing to pull any firmware
So I can grab it for you

iBowToAndroid said:
Well normally I would say that you can get it yourself from the various firmware download tools like SamFirm or Frija. But it looks like Samsung changed something over the weekend, as the current versions of the tools are failing to pull any firmware
So I can grab it for you
Click to expand...
Click to collapse
Thank you and always the best.

blkghost22 said:
Thank you and always the best.
Click to expand...
Click to collapse
Added, UGC build

iBowToAndroid said:
Added, UGC build
Click to expand...
Click to collapse
Guess its taking time to upload? Dont see the files just yet..
Edit:
Nvm i see the files now... again thank you so much

I know long time ago it didnt work but just wanted to throw it out there... if i flash the u1 or thom browne am i able to flash the att userdata to get the advance msging and video calls?

blkghost22 said:
I know long time ago it didnt work but just wanted to throw it out there... if i flash the u1 or thom browne am i able to flash the att userdata to get the advance msging and video calls?
Click to expand...
Click to collapse
1. Thom Browne *is* U1 firmware
2. USERDATA belongs to U firmware, not U1. So I have absolutely no idea. You'll have to try it and see what happens

Have successfully flashed F711U1 to F711W. Everything working fine. Used Odin 3.14, CSC_OMC_OYV, and working on Telus with all available features working.
Please note that AFTER the flash, you will be prompted to reset the device to stock. Reason being is that it needs to install the appropriate CSC linked to the inserted SIM card.

Can anyone confirm if cross flashing different build firmwares that it will unlock the unlock bootloader option?
Currently on carrier firmware for TMobile and I'm wondering if this is possible or if the u1 firmware has the unlock bootloader option available