Database Info

SM-G930P to SM-G930U

I have the SM-G930UP baseband version G930PVPS4BQE1
I am preparing to flash the universal firmware, but with the T-Mobile modem. The goal is a phone with the U firmware and the T-Mobile modem.
Download and install Samsung USB drivers: http://developer.samsung.com/galaxy/others/android-usb-driver-for-windows
Odin utility: https://odindownload.com/SamsungOdin/
Latest SM-G930U firmware files for “USA (XAS)”:
G930UUEU4BRD1_G930OUYM4BRD1_XAS
All U variants have the same baseband etc. numbers , so I assume it doesn't matter which one I use.
https://www.sammobile.com/firmwares/galaxy-s7/SM-G930U/
Latest T-Mobile SM-G930T firmware files:
G930TUVS4BRC1_G930TTMB4BRC1_TMB https://www.sammobile.com/firmwares/galaxy-s7/SM-G930T/
The plan is to back up all data first, extract the all the files (Odin, drivers, and both U and T archives). Install the Samsung USB drivers.
Next steps:
Connect phone to PC.
Shut down phone: Hold Home and Volume-Down buttons while pressing the power button. Press Volume-Up when prompted to place phone in download mode (whatever it’s called).
Open Odin. Wait for Com connected prompt.
Click BL button. Select the SM-G930U BL file.
Click AP button. Select the SM-G930U AP file.
Click CP button. Select the SM-G930T CP file.
Click CSC button. Select the SM-G930U CSC (NOT HOME_CSC) file to wipe and factory reset the phone.
Click Start and wait for Odin to say “Complete.”
Any feedback? Suggestions? Anything I missed?

what baseband are you currently on?

why would you want T-mobile modem? anything wrong with U-version?

turbozapekanka said:
why would you want T-mobile modem? anything wrong with U-version?
Click to expand...
Click to collapse
In some of the reading I have done it appears advantageous to have the carrier modem of the service provider you use; I'm assuming because the carriers tweak the modem for use with their particular infrastructure.
I don't know if that's true, but I have seen a number of posts to that effect. It sounds logical and I figure it can't hurt as long as it works.

InsanePostman said:
what baseband are you currently on?
Click to expand...
Click to collapse
Mr. _Happy said:
I have the SM-G930P baseband version G930PVPS4BQE1
Click to expand...
Click to collapse
Software version is the same. G930PVPS4BQE1 it's from May 2017.

Mr._Happy said:
In some of the reading I have done it appears advantageous to have the carrier modem of the service provider you use; I'm assuming because the carriers tweak the modem for use with their particular infrastructure.
I don't know if that's true, but I have seen a number of posts to that effect. It sounds logical and I figure it can't hurt as long as it works.
Click to expand...
Click to collapse
I doubt it.
I've been using U-version (converted from SM-G930P) on T-mobile for a year and found no issues whatsoever.
I was reading the opposite, something like U-version has more LTE bands unlocked (which makes sense as it should work with all carriers)
Also someone here claimed it has extra bands for Europe. like band 7, 20

turbozapekanka said:
I doubt it.
I've been using U-version (converted from SM-G930P) on T-mobile for a year and found no issues whatsoever.
I was reading the opposite, something like U-version has more LTE bands unlocked (which makes sense as it should work with all carriers)
Also someone here claimed it has extra bands for Europe. like band 7, 20
Click to expand...
Click to collapse
Interesting. That seems logical too.
Unfortunately I may not be flashing anything as every time I have downloaded firmware from SAMOBILE and extracted it I have got an error message that the AP portion has a problem. If I "retry" it gives me the same error. If I "skip" it unpacks everything except the AP file. I have tried several times with multiple downloads. Each one took the full two hours to download, so it's been a lengthy process with no results.
When you flashed the G930U which variant did you use?

Mr._Happy said:
Interesting. That seems logical too.
Unfortunately I may not be flashing anything as every time I have downloaded firmware from SAMOBILE and extracted it I have got an error message that the AP portion has a problem. If I "retry" it gives me the same error. If I "skip" it unpacks everything except the AP file. I have tried several times with multiple downloads. Each one took the full two hours to download, so it's been a lengthy process with no results.
When you flashed the G930U which variant did you use?
Click to expand...
Click to collapse
I flashed version G930UUEU4APL2 with odin 3.12.3
It was back in January 2017. Note the number 4 in the version. This indicates bootloader version.
I believe you can no longer flash this version if your current version has 5 (or any greater number) in place of 4 because you're not allowed to downgrade the bootloader version.
Sprint is known to bump the bootloader version from 4 to 5 for (supposedly) blocking this type of conversions of their branded phones.

turbozapekanka said:
I flashed version G930UUEU4APL2 with odin 3.12.3
It was back in January 2017. Note the number 4 in the version. This indicates bootloader version.
I believe you can no longer flash this version if your current version has 5 (or any greater number) in place of 4 because you're not allowed to downgrade the bootloader version.
Sprint is known to bump the bootloader version from 4 to 5 for (supposedly) blocking this type of conversions of their branded phones.
Click to expand...
Click to collapse
Mr._Happy said:
I have the SM-G930P baseband version G930PVPS4BQE1
Click to expand...
Click to collapse
Sprint is currently on bootloader 6, actually. Crappy obstructionist commercialism specifically to block people converting.
I have been denying and rejecting the software updates since May of 2017 which is when I got that software version, so your G930UUEU4APL2 firmware from January would not work on this phone as my Sprint firmware is more recent.
I should be able to flash the most recent version of G930U, however. I just can't seem to download one that will extract the AP portion. It's really frustrating.

Try this https://forum.xda-developers.com/att-galaxy-s7/how-to/firmware-g930uueu4apl2-sm-g930u-t3535230
You should be able to flash any firmware as long as the bootloader version is the same
For newer firmwares you may need to use the latest Odin version (3.13.x)
---------- Post added at 12:15 PM ---------- Previous post was at 12:07 PM ----------
I wonder why did you choose XAS version.
I also remember back in time I downloaded two versions of U-firmware (SPR and XAA) and compared the files they appeared identical.

turbozapekanka said:
I doubt it.
I've been using U-version (converted from SM-G930P) on T-mobile for a year and found no issues whatsoever.
I was reading the opposite, something like U-version has more LTE bands unlocked (which makes sense as it should work with all carriers)
Also someone here claimed it has extra bands for Europe. like band 7, 20
Click to expand...
Click to collapse
What ROM have you been running?
Looks like slim pickins for the snapdragon chipset.
I assume all Exynos ROMs would obviously not work .
I have a SM-G930VL that I flash the G930U firmware . Much better

Stock

turbozapekanka said:
You should be able to flash any firmware as long as the bootloader version is the same
Click to expand...
Click to collapse
This is what I was saying. The last Sprint update I did on the phone was May 2017. I have been dismissing the update nag since then. Which means I could flash any G930U firmware with a date later than May 2017 with the same bootloader number.
Sprint has been trying to block this: their bootloader number is currently on 6, all the other carriers are on 4.
turbozapekanka said:
For newer firmwares you may need to use the latest Odin version (3.13.x)
Click to expand...
Click to collapse
Yep. The link I used to download the latest version was in the first post of this thread. 3.13 worked just fine.
The problems I was having had to do with the my computer, but I solved them and was able to to flash the latest version of G930U.
The phone is snappy and without the annoying lag.
Call quality improved immediately. With the Sprint firmware on the T-Mobile network there was a glitch with using the voicemail icon on the dial screen - it would fail to call the voicemail and give an incomplete call error; the workaround was to call myself from contacts and enter my pin to get to my voicemail. Now the voicemail icon on the dialer takes me to voicemail without a hitch. When calling it doesn't have a 15 - 20 second wait before ringing the number (the top left of the status bar would read "Attempting"). Internet reception is also better especially in the NYC subway.
Also as soon as my phone went from Sprint to T-Mobile I could no longer send or receive pictures via text. Apparently Sprint firmware wasn't interested in sending MMS messages anymore, but with the U firmware they work just fine and regular texts go through more quickly as well.
So far battery life is about the same as far as I can tell, maybe a marginal improvement. Nothing to call home about.
But mostly I seem to get the overall desired reception improvement: it stopped dropping calls, and the call quality is solid and the undersea world that had been happening with the Sprint firmware is gone.
Also the fingerprint scanner is working better.
It's much improved.
I REALLY like how it seemlessly goes from voice on network to voice on WiFi.
Question: will this get OTA updates? Is it fantasy to think the G930U will get Oreo?
I am interested in testing the various towers, most frequent LTE bands, signal strength, and handset radios. Is there a thread for that or any apps you know of?

Mr._Happy said:
Question: will this get OTA updates? Is it fantasy to think the G930U will get Oreo?
Click to expand...
Click to collapse
Yes it will get OTA updates including Oreo. U-version lags behind branded versions in this regard though.

i'm just got the oreo update - installing right now (us cellular)

i have tmobile g930t
if i shift to U , will volte work?
because i am unable to use volte in india now

Hey guys so I am brand-new to all this but need to convert my g930p to g930u. I just want to clear this up: because my software version is Q930PVPU6CRE7, I won't be able to flash the version OP used but must find a version with a 6 in it?

I'm in the same boat with my wife's phone. Limited bands available meaning it's on 3G more often than not, and MMS won't work if connected to WiFi. Not to mention the sprint junkware... is there any way to change from G930P to a G930U firmware if the phone is currently on bootloader version 6? I don't mind rooting...

I flashed G930U on G930P but network still not working. It shows unknown network and Radio Off. Mobile can read SIM menu and Contacts but no signal. Any help please?
EDIT: Now I know that changing ROM or rooting does not network unlock.

Mr._Happy said:
I have the SM-G930UP baseband version G930PVPS4BQE1
I am preparing to flash the universal firmware, but with the T-Mobile modem. The goal is a phone with the U firmware and the T-Mobile modem.
Download and install Samsung USB drivers: http://developer.samsung.com/galaxy/others/android-usb-driver-for-windows
Odin utility: https://odindownload.com/SamsungOdin/
Latest SM-G930U firmware files for “USA (XAS)”:
G930UUEU4BRD1_G930OUYM4BRD1_XAS
All U variants have the same baseband etc. numbers , so I assume it doesn't matter which one I use.
https://www.sammobile.com/firmwares/galaxy-s7/SM-G930U/
Latest T-Mobile SM-G930T firmware files:
G930TUVS4BRC1_G930TTMB4BRC1_TMB https://www.sammobile.com/firmwares/galaxy-s7/SM-G930T/
The plan is to back up all data first, extract the all the files (Odin, drivers, and both U and T archives). Install the Samsung USB drivers.
Next steps:
Connect phone to PC.
Shut down phone: Hold Home and Volume-Down buttons while pressing the power button. Press Volume-Up when prompted to place phone in download mode (whatever it’s called).
Open Odin. Wait for Com connected prompt.
Click BL button. Select the SM-G930U BL file.
Click AP button. Select the SM-G930U AP file.
Click CP button. Select the SM-G930T CP file.
Click CSC button. Select the SM-G930U CSC (NOT HOME_CSC) file to wipe and factory reset the phone.
Click Start and wait for Odin to say “Complete.”
Any feedback? Suggestions? Anything I missed?
Click to expand...
Click to collapse
if i try this method to convert smg930u to smg930f will it work cuz meh need root ?

Flashing Stock Firmware Failed

I have the SM-G955F.
I flashed TWRP using the instructions on here and everything worked perfectly fine. I even booted back into the stock OS - however, the Magisk app was not there.
I was going to boot back into TWRP when I got the message "Only official released binaries are allowed to be flashed" and went into a bootloop.
Then I followed the instructions to flash the stock firmware back on to my S8+, but it failed. Can someone point me in the right direction please?
I used Odin3_v3.13.1. I have attached 2 pictures to show the error.

negative_silent said:
I have the SM-G955F.
I flashed TWRP using the instructions on here and everything worked perfectly fine. I even booted back into the stock OS - however, the Magisk app was not there.
I was going to boot back into TWRP when I got the message "Only official released binaries are allowed to be flashed" and went into a bootloop.
Then I followed the instructions to flash the stock firmware back on to my S8+, but it failed. Can someone point me in the right direction please?
I used Odin3_v3.13.1. I have attached 2 pictures to show the error.
Click to expand...
Click to collapse
Sounds like you are trying flash older firmware than what is on your phone. Odin saying you are flashing firmware with bootloader ver 3. Download mode saying you have ver 4 bootloader. You will need latest version of firmware with ver 4 bootloader or higher and flash with Odin.
Bootloader version number is 5th number from right of firmware name.

spawnlives said:
Sounds like you are trying flash older firmware than what is on your phone. Odin saying you are flashing firmware with bootloader ver 3. Download mode saying you have ver 4 bootloader. You will need latest version of firmware with ver 4 bootloader or higher and flash with Odin.
Bootloader version number is 5th number from right of firmware name.
Click to expand...
Click to collapse
Thanks so much for responding. So from my reading and researching, I figured that was the case. However, I could only find the the official firmwares from here:
https://forum.xda-developers.com/galaxy-s8+/development/rom-galaxy-s8-t3749444
Which happens to be v3 bootloaders. Is there any specific v4 bootloader that I should be flashing? I am at my wits end here. I followed all the instructions perfectly...
I read that everything works fine until reboot then you get the "Only official released binaries are allowed to be flashed"
https://forum.xda-developers.com/galaxy-s8/how-to/guide-how-to-root-galaxy-s8-crgh-rom-t3846009
Any help would be greatly appreciated.

negative_silent said:
Thanks so much for responding. So from my reading and researching, I figured that was the case. However, I could only find the the official firmwares from here:
https://forum.xda-developers.com/galaxy-s8+/development/rom-galaxy-s8-t3749444
Which happens to be v3 bootloaders. Is there any specific v4 bootloader that I should be flashing? I am at my wits end here. I followed all the instructions perfectly...
I read that everything works fine until reboot then you get the "Only official released binaries are allowed to be flashed"
https://forum.xda-developers.com/galaxy-s8/how-to/guide-how-to-root-galaxy-s8-crgh-rom-t3846009
Any help would be greatly appreciated.
Click to expand...
Click to collapse
Firmware can be download from sammobil or updato and flashed with odin
https://www.sammobile.com/firmwares/
https://updato.com/firmware-archive-select-model
Select phone model then search for firmware for your region ( and carrier ).
Only official binary error is probably due to your rmm state being in prernormal state which means if you unlock your bootloader ( oem ) and reboot it will relock bootloader causing this message.
Reflash firmware to get phone running again.
Have a read through this guide for more info about rmm state
https://forum.xda-developers.com/sa...w-to/guide-root-install-twrp-samsung-t3747535

spawnlives said:
Firmware can be download from sammobil or updato and flashed with odin
https://www.sammobile.com/firmwares/
https://updato.com/firmware-archive-select-model
Select phone model then search for firmware for your region ( and carrier ).
Only official binary error is probably due to your rmm state being in prernormal state which means if you unlock your bootloader ( oem ) and reboot it will relock bootloader causing this message.
Reflash firmware to get phone running again.
Have a read through this guide for more info about rmm state
https://forum.xda-developers.com/sa...w-to/guide-root-install-twrp-samsung-t3747535
Click to expand...
Click to collapse
Thank you for the links. I can't tell you how much I appreciate you helping me out.
I bought the phone from eBay, it's a SM-G955F - as for the region and carrier, I live in United States using AT&T. My primary reason getting the international version is to install a custom ROM on it. Is there a specific firmware for my region (U.S.) and carrier (AT&T) that I should flash? I don't see it US listed.
Also, using the guide I mentioned above, I did flash the RMM bypass, however, it was not the version 2, found in the guide you posted. Is that where I messed up?

negative_silent said:
Thank you for the links. I can't tell you how much I appreciate you helping me out.
I bought the phone from eBay, it's a SM-G955F - as for the region and carrier, I live in United States using AT&T. My primary reason getting the international version is to install a custom ROM on it. Is there a specific firmware for my region (U.S.) and carrier (AT&T) that I should flash? I don't see it US listed.
Also, using the guide I mentioned above, I did flash the RMM bypass, however, it was not the version 2, found in the guide you posted. Is that where I messed up?
Click to expand...
Click to collapse
I don't live in the US but there should be filters on the websites to filter by region. I normally use updato and firmware for your region shows up under U.S.A it will show you all your carrier's like at&t, Sprint, t-mobile and non carrier firmware.
As for the rmm zip version 2 may have been better it is more up to date and is smaller in size. Both should do the same job though.

spawnlives said:
I don't live in the US but there should be filters on the websites to filter by region. I normally use updato and firmware for your region shows up under U.S.A it will show you all your carrier's like at&t, Sprint, t-mobile and non carrier firmware.
As for the rmm zip version 2 may have been better it is more up to date and is smaller in size. Both should do the same job though.
Click to expand...
Click to collapse
I looked on updato and sammobile, both do not have USA region. Can I flash firmware from another region and still get it to work on my carrier?
For example, can I flash U.K. (Vodafone) since its on ver 4 firmware and uses GSM - regardless of region and carrier?

negative_silent said:
I looked on updato and sammobile, both do not have USA region. Can I flash firmware from another region and still get it to work on my carrier?
For example, can I flash U.K. (Vodafone) since its on ver 4 firmware and uses GSM - regardless of region and carrier?
Click to expand...
Click to collapse
Just doubled checked saw you have the f series while updato has u1 version firmware that I can see.
You can flash firmware from the UK if you want but can't say for certain you will have full network capabilities due to the difference in region and carriers ( network capabilities ). I would try and find an unbranded version ( non carrier branded) firmware first if not then something like Vodafone .

There is a simple reason for this. If you came from TWRP as "reboot to download", this creates the problem. Turn off the phone. Go to download mode with Vol_Down+Bixby+Power and then press Vol_Up button. When I enter download mode like this, it flashes without any problems.

G970U and G970U1 Firmware Links Here

For those who don't know, G970U is the model number of all of the US carrier versions of the Galaxy S10e. The G970U1 is the model number of the same device, but sold by Samsung SIM unlocked and with no carrier bloatware. Firmware is 100% interchangeable among these models: any U or U1 firmware version can be flashed to any U or U1 device at any time, assuming that you're not trying to downgrade the bootloader. Also, U firmware is identical for the 4 base files (AP, BL, CP, CSC) for each individual build, no matter which carrier it comes from. So if you download 2 different carrier versions of the exact same build, the 4 base files will be identical. Where the firmware differs is in the USERDATA file - that's where the carrier bloatware and customizations reside.
Manual Odin flashing is designed for those who:
- want to manually update to a newer version of U firmware on their U device, either because they don't want to wait for their carrier's OTA or because OTAs aren't working on their device, or a different carrier got a new feature/patch before they did
- want to flash U1 firmware to their U device
- want to convert from U1 firmware to carrier U firmware
- want to convert from one carrier's U firmware (with all apps and bloatware) to a different carrier's U firmware (with all apps and bloatware)
For those who aren't already aware, anyone can now download firmware for almost any Samsung device any time that they want, via SamFirm or Frija. There are threads and info about them here on XDA so I won't waste time explaining - do a search if you're not already familiar with these tools. But they only provide whatever the latest/newest/current version is - nothing older. I pay for a subscription to a site that gets the official releases (usually) before they hit SamFirm/Frija, so that's where my files come from. However, I don't have unlimited bandwidth on the site, and it's also quite time consuming to download the files, zip them up, and upload them to AFH. And, I do threads like this for every single Sx and Note x model - so I won't be uploading every single version. The only full builds that I upload are ones where I get access to a new bootloader and/or Android version early, before they hit SamFirm/Frija.
This is not a "beginner's guide to Odin flashing" -type post/thread, so I won't list basic, step-by-step flashing instructions. My threads are geared towards those who already know what they're doing. If you're new to manually flashing Samsung firmware, I recommend you consult one of those "beginner's" guides- there are tons of them here on XDA.
Happy flashing!
U firmware: https://www.androidfilehost.com/?w=files&flid=290639
U1 firmware: https://www.androidfilehost.com/?w=files&flid=290640
(Quebec tends to be the fastest download mirror, if it gives you that option)
Notes:
- I compress extra small for space and bandwith savings. The default Windows extractor can't handle it, so you'll need a 3rd party tool like 7zip, WinRAR, etc
- I remove the .md5 from each file solely for faster flashing (Odin won't check the file integrity without it). Rest assured, the files are perfectly fine and safe - Odin has a million safechecks built in.
- My naming method for folders is: build - bootloader - Android version.
So "SAT - 1 - 9.0" means the full build number ends in SAT, it's bootloader version 1, and it's Android 9.0. When bootloader and Android versions increment, the first build to have those changes will have its folder notated appropriately.
- HOME CSC file keeps data intact; using the other CSC will wipe data. Any zips with "wipe" in the title do not have a HOME CSC included.
NOTE: With initial release, HOME CSC was not included by default, so I created it myself. Should flash fine, but until noted by someone in the thread, it has not been tested.
- I have identical threads for the S10 and S10+ as well
- Since AT&T doesn't allow their firmware to be publicly available (for any of their devices), I'll try to always upload at least one USERDATA per bootloader increment for AT&T (and Cricket, if they get this model). I'll also upload any full builds if AT&T is the only carrier to get that specific build, because you won't be able to find the files anywhere else.
- For identifying USERDATAS, and to know what region/CSC to use in SamFirm/Frija:
AIO = Cricket (not available via SamFirm/Frija)
ATT = AT&T (not available via SamFirm/Frija)
BST = Boost Mobile
CCT = Xfinity Mobile (Comcast)
CHA = Spectrum Mobile (Charter)
SPR = Sprint
TMB = T-Mobile
TMK = Metro PCS
USC = US Cellular
VZW = Verizon (available via SamFirm/Frija, but Manual Entry is required - Auto will not work)
XAA = U1 firmware
- the correct procedure for switching from one carrier's firmware to another is:
1. Flash full U1 firmware package including non HOME CSC
2. Upon boot, insert a SIM of the carrier whose firmware you want
3. Watch for the popup that says "reboot to apply new carrier settings" etc, and do it
4. After that restart completes, reboot back to Download mode and flash the full U firmware package, with the USERDATA file of the carrier whose firmware you want

Just a quick question will you be hosting FW for models G973U, G973U1, G975U, G975U1? Don't know if XDA will have separate forums for the s10e and s10+ models. Supposedly there will be a 5G S10+ coming during Mid 2019 which would have a separate FW section I assume.

equake said:
Just a quick question will you be hosting FW for models G973U, G973U1, G975U, G975U1? Don't know if XDA will have separate forums for the s10e and s10+ models. Supposedly there will be a 5G S10+ coming during Mid 2019 which would have a separate FW section I assume.
Click to expand...
Click to collapse
Read the OP

Nice plan! Kudos

Build SBA added.
SPR is the only USERDATA for this build so far - not sure if it will stay a Sprint-exclusive release, or be more widely pushed out. But like with any other build, it can be flashed to any S10e, regardless of which carrier it originally came from.
EDIT: Xfinity and Verizon USERDATAs added

I have the tmobile variant. Trying to flash and keeps failing for some reason. Trying to flash the U1 . Came with G970USQU1ASAT

matteosaeed said:
I have the tmobile variant. Trying to flash and keeps failing for some reason. Trying to flash the U1 . Came with G970USQU1ASAT
Click to expand...
Click to collapse
Can we get more details on that?

iBowToAndroid said:
MODS: Please move appropriately if the S10e is ever given its own forum
(For those who don't know, G970U is the model number of all of the US carrier versions of the Galaxy S10e. The G970U1 is the model number of the same device, but sold by Samsung SIM unlocked and with no carrier bloatware. Firmware is 100% interchangeable among any of those models.)
As of the moment of posting, these cannot yet be obtained from SamFirm, and are not yet on SamMobile, but I thought some of you might like to get early access
I have no idea if existing patched Odin can be used to flash them, since I don't have a device to try it on. Maybe one of the blog sites can give it a try for us, on one of their review units. But at minimum, devs can peek into the partitions if they want, or casual users can keep the files on hand for converting firmware, once they get their device.
The large files will be your 4 part firmware and then grab your desired USERDATA as well. I'll continue to add more versions and more USERDATAs over time.
Happy flashing!
U firmware: https://www.androidfilehost.com/?w=files&flid=290639
U1 firmware: https://www.androidfilehost.com/?w=files&flid=290640
Notes:
- I compress extra small for space and bandwith savings. The default Windows extractor can't handle it, so you'll need a 3rd party tool like 7zip, WinRAR, etc
- I remove the .md5 from each file solely for faster flashing (Odin won't check the file integrity without it). Rest assured, the files are perfectly fine and safe - Odin has a million safechecks built in.
- My naming method for folders is: build - bootloader - Android version.
So "SAT - 1 - 9.0" means the full build number ends in SAT, it's bootloader version 1, and it's Android 9.0. When bootloader and Android versions increment, the first build to have those changes will have its folder notated appropriately.
- HOME CSC file keeps data intact; using the other CSC will wipe data. Any zips with "wipe" in the title do not have a HOME CSC included.
NOTE: With initial release, HOME CSC was not included by default, so I created it myself. Should flash fine, but until noted by someone in the thread, it has not been tested.
- SamFirm still works, if you want to download them yourself. I pay for a subscription to a site that gets beta builds and also gets the official releases before they hit SamFirm, so that's where my files come from
NOTE: As of the moment of posting, these are not available via SamFirm. I'll remove this note once they become available for download (probably at/after device launch)
- I have identical threads for the S10 and S10+ as well
- You can get USERDATAs from SamFirm for everything but AT&T - those files will never be on SamFirm. So in addition to the 5 piece firmware, I'll try to always upload one USERDATA per bootloader increment for AT&T
- For USERDATAS (all the others are self explanatory):
ACG = C-Spire
AIO = Cricket
LRA = Bluegrass Cellular
CCT = Xfinity Mobile (Comcast)
CHA - Spectrum Mobile (Charter)
TMK = Metro PCS
Click to expand...
Click to collapse
Hope u can get the att.. i want the video call and advanced messaging that is missing from u1

iBowToAndroid said:
Can we get more details on that?
Click to expand...
Click to collapse
What would you like to know? I didn't get error codes or anything. Just failed. I used the csc and not the home one though.

blkghost22 said:
Hope u can get the att.. i want the video call and advanced messaging that is missing from u1
Click to expand...
Click to collapse
1. Don't quote the OP
2. What do you mean by "get the att"? There is an AT&T USERDATA for the U firmware
matteosaeed said:
What would you like to know? I didn't get error codes or anything. Just failed. I used the csc and not the home one though.
Click to expand...
Click to collapse
There might not be "codes" per se, but there's always a specific error that either shows up in Odin, or on the phone itself

iBowToAndroid said:
1. Don't quote the OP
2. What do you mean by "get the att"? There is an AT&T USERDATA for the U firmware
There might not be "codes" per se, but there's always a specific error that either shows up in Odin, or on the phone itself
Click to expand...
Click to collapse
Yeah, I remember on earlier phones there were errors showing. I didn't see anything except failed only on Odin. I'll try again later. I tried both the patched by raymond and regular Odin.

matteosaeed said:
Yeah, I remember on earlier phones there were errors showing. I didn't see anything except failed only on Odin. I'll try again later. I tried both the patched by raymond and regular Odin.
Click to expand...
Click to collapse
The only Odin that might work is the 3.13 patched (3B). But as stated in the OP, I have no idea if that Odin will work, or if a new one is needed.
If Odin fails, then we need to know on which step it fails, and what the message is. Probably best to just post a picture of it, or paste the log

Just to be clear, nobody has been able to flash U1 firmware to a U s10 device?
Considering ordering an s10e, but hoped that I could flash the U1 firmware to pass the provisioning check for tethering.

@iBowToAndroid
By any chance is there an AT&T userdata for the new SBA firmware? Sorry to bother
Nvm i just didnt check userdata and it worked

iBowToAndroid said:
The only Odin that might work is the 3.13 patched (3B). But as stated in the OP, I have no idea if that Odin will work, or if a new one is needed.
If Odin fails, then we need to know on which step it fails, and what the message is. Probably best to just post a picture of it, or paste the log
Click to expand...
Click to collapse
After i updated t-mobile firmware, i was able to flash with home csc. Stuck in starting android but will do a factory reset and will work fine. Will report back.
freddie813 said:
Just to be clear, nobody has been able to flash U1 firmware to a U s10 device?
Considering ordering an s10e, but hoped that I could flash the U1 firmware to pass the provisioning check for tethering.
Click to expand...
Click to collapse
Should work. I usually use pdanet vs the native tethering because tmobile can detect native tethering and throttle (happened on my pixel) .
---------- Post added at 11:59 PM ---------- Previous post was at 11:46 PM ----------
Flash successfully and working now. Will test if anything is broken

So all 4 main files are the same and there is no difference in T-Mobile's modem file versus ATT's? If I grab USERDATA file for TMB, it will flash all T-Mobile's bloatware.
As I remember flashing S7, S8 with a firmware that had TMB wording, where I could distinguish the firmware files. I mainly flashed 4 files on aforementioned models and skipped USERDATA and my unlocked U1 model became TMO and had all the features.
Soon T-Mobile is releasing firmware updates, will see how different they are.

So ive flashed the U1 firmware and it takes but the user data refuses to take and my phone is stil saying vzw/vzw/vzw
---------- Post added at 12:05 PM ---------- Previous post was at 12:05 PM ----------
Thinking im going to need a pulled pit file from someone actual tmobile s10e
---------- Post added at 12:06 PM ---------- Previous post was at 12:05 PM ----------
if i use the regular U firmware with tmobile it goes back to factory of verizon and logo comes back

matteosaeed said:
After i updated t-mobile firmware, i was able to flash with home csc. Stuck in starting android but will do a factory reset and will work fine. Will report back.
---------- Post added at 11:59 PM ---------- Previous post was at 11:46 PM ----------
[/COLOR]Flash successfully and working now. Will test if anything is broken
Click to expand...
Click to collapse
Could you clarify the exact actions you took, step by step? And which odin?

Here's the procedure that worked best on the S9s, to convert firmware on a U model:
1. Wipe in recovery -->reboot bootloader-->flash U1 firmware
2. Upon boot, watch for the popup that says "your device will restart to apply new carrier settings", and do it. Make sure your desired SIM is inserted for this step.
3. After that finishes, power off, boot to download, and flash desired U firmware with non HOME CSC and desired U USERDATA. That should give you all the desired carrier settings - and bloatware.
Also, G973U and G973U1 firmware is now live and downloadable in SamFirm. Getting U1 (at least for now) requires manual entry - Auto will not work. U firmware is up for these carriers:
Xfinity Mobile
Spectrum Mobile
Sprint
T-Mobile
Metro
US Cellular
Verizon (have to use Manual entry - Auto will not work)
So going forward, I'll only be adding full builds if I can get them before they hit SamFirm, and only if there isn't build for that month already (eg. I won't add any more February builds since SBA is already up.). I will try to stay up to date on USERDATAs for AT&T and Cricket, since AT&T won't let their firmware be put on SamFirm.

I have an G975U1 and I attempted to flash the U1 firmware using 3.13 out of curiosity.
The first time it failed.
When the device steps through the necessary steps for Verified Boot, it failed.
VBMETA was referenced as was the partition table. So I can only surmise that the new VBMETA.IMG information doesn't match that which is stored within the device's partition tables.
I, unfortunately, didn't capture the the log nor the screenshot.
When I put the device back into 'Download Mode' and tried again, it passed.
I am going to try a CSC change from G975U1 to G975W using Odin 3.13B but I doubt it will work.
.....
And my attempt to change G975U1 to G975W using the Bell combination files failed. It provided the same error messages regarding VBMETA. See attached logs and screenshot.

Please help with switching firmwares, kind of a weird situation.

Getting a new-in-box Note10+ today from Swappa, so I assume it will be on some Android 9.0 TMO firmware. I need to get it onto the Verizon firmware.
SamFirm only gives the latest Android 10 firmwares. (It may be important to note that the VZW and XAA files both have the exact same filename: SM-N975U1_10_20200118102941_hj8esiossq_fac)
Is it safe to open the box > go straight into download mode > flash the newest VZW firmware via Odin?
Or are there other things I should do first? For example (in no particular order):
- first boot
- updating the software via settings
- flashing XAA firmware, THEN first boot with verizon sim already in phone per this thread, THEN flash VZW firmware
Thank you. Also any other suggestions are welcomed.

finshan said:
Getting a new-in-box Note10+ today from Swappa, so I assume it will be on some Android 9.0 TMO firmware. I need to get it onto the Verizon firmware.
SamFirm only gives the latest Android 10 firmwares. (It may be important to note that the VZW and XAA files both have the exact same filename: SM-N975U1_10_20200118102941_hj8esiossq_fac)
Is it safe to open the box > go straight into download mode > flash the newest VZW firmware via Odin?
Or are there other things I should do first? For example (in no particular order):
- first boot
- updating the software via settings
- flashing XAA firmware, THEN first boot with verizon sim already in phone per this thread, THEN flash VZW firmware
Thank you. Also any other suggestions are welcomed.
Click to expand...
Click to collapse
100% safe to immediately flash VZW firmware. The phone wont know any difference if you booted it first or not.

Youdoofus said:
100% safe to immediately flash VZW firmware. The phone wont know any difference if you booted it first or not.
Click to expand...
Click to collapse
Thank you. And I just noticed this is the Note 10 forum not the 10+ forum (thanks google)...
What about concerns per the thread I linked where flashing VZW firmware is still recognized as a TMO device unless you boot the XAA firmware with the verizon sim before flashing the VZW firmware? Is that an old issue that's no longer a problem now?
The device won't mind that I'm jumping from an older version of Android to a newer version? What about the bootloader version, when does that get updated, as I understand it's currently on version 2 and how will that affect this process?
Thanks again, you post was short and being an $800 device I obviously am trying to have all my bases covered before messing with it.

finshan said:
Thank you. And I just noticed this is the Note 10 forum not the 10+ forum (thanks google)...
What about concerns per the thread I linked where flashing VZW firmware is still recognized as a TMO device unless you boot the XAA firmware with the verizon sim before flashing the VZW firmware? Is that an old issue that's no longer a problem now?
The device won't mind that I'm jumping from an older version of Android to a newer version? What about the bootloader version, when does that get updated, as I understand it's currently on version 2 and how will that affect this process?
Thanks again, you post was short and being an $800 device I obviously am trying to have all my bases covered before messing with it.
Click to expand...
Click to collapse
you cannot go backwards in bootloader revisions, but you can go backwards in android versions as long as theyre on the same BL revision(not likely, but who knows? I didnt look yet). Also, the worst thing that could happen if you try to flash an older BL version is that itll fail in Odin and will still allow the phone to boot normally (usually, and if it doesnt, its still fixable). The only issue with booting it after flashing new firmware with your current sim is that itll install the carrier specific stuff on the phone so long as the CSC needed for that is in the multi CSC pack you flashed on the phone, and if it does install the carrier crap you dont want, just factory reset it and reboot with the actual sim you want you use
no problem man, thats what we are here for

General G996U and G996U1 Firmware Links and Flashing Discussion Here

For those who aren't already aware, G996U is the model number of all of the US carrier versions of the S21+. The G996U1 is the model number of the same device, but sold by Samsung SIM unlocked and with no carrier bloatware. Firmware is 100% interchangeable among these models: any U or U1 firmware version can be flashed to any U or U1 device at any time, assuming that you're not trying to downgrade the bootloader. A "U to U" or "U1 to U1" flash does not require a factory reset, but changing from one firmware to the other will require one. Also, U firmware is identical for the 4 base files (AP, BL, CP, CSC) for each individual build, no matter which carrier it comes from. So if you download 2 different carrier versions of the exact same build, the 4 base files will be identical. Where the firmware differs is in the USERDATA file - that's where the carrier bloatware and customizations reside.
Manual Odin flashing is designed for those who:
- want to manually update to a newer version of U firmware on their U device, either because they don't want to wait for their carrier's OTA or because OTAs aren't working on their device, or a different carrier got a new feature/patch before they did
- want to flash U1 firmware to their U device
- want to convert from U1 firmware to carrier U firmware
- want to convert from one carrier's U firmware (with all apps and bloatware) to a different carrier's U firmware (with all apps and bloatware)
For those who aren't already aware, anyone can now download firmware for almost any Samsung device any time that they want, via the various firmware download tools posted here on XDA like SamFirm or Frija. There are threads and info about them here on XDA so I won't waste time explaining - do a search if you're not already familiar with these tools. But they only provide whatever the latest/newest/current version is - nothing older. I pay for a subscription to a site that gets the official releases (usually) before they hit the firmware download tools, so that's where my files come from.
This is not a "beginner's guide to Odin flashing" -type post/thread, so I won't list basic, step-by-step flashing instructions. My threads are geared towards those who already know what they're doing. If you're new to manually flashing Samsung firmware (or haven't done it in a long time), I recommend you consult one of those "beginner's" guides- there are tons of them here on XDA.
Happy flashing!
U firmware: https://www.androidfilehost.com/?w=files&flid=322091
U1 firmware: https://www.androidfilehost.com/?w=files&flid=322092
Notes:
- DON'T QUOTE THE OP WHEN YOU REPLY, kthx
- I have lots of threads just like this one for other Samsung flagships, if it interests you. For those who have already made use of my previous threads for a different device and are upgrading to an S21, welcome back
- My zips are compressed extra small for space and bandwidth savings. The default Windows extractor can't handle it, so you'll need a 3rd party tool like 7zip, WinRAR, etc
- it's quite time consuming to download the files, zip them up, and upload them to AFH. And, I do threads like this for every single Sx and Note x model, so I won't be uploading every single version. The only full builds that I upload are ones where I get access to a new bootloader and/or Android version early, before they hit the firmware download tools.
- My naming method for folders on AFH is: build - bootloader - Android version
So "SAT - 1 - 9.0" means the full build number ends in SAT, it's bootloader version 1, and it's Android 9.0. When bootloader and Android versions increment, the first build to have those changes will have its folder notated appropriately.
- HOME CSC file keeps data intact; using the other CSC will wipe data. Flashing USERDATA will also wipe data.
- Since AT&T doesn't allow their firmware to be publicly available (for any of their devices), I'll try to always upload at least one USERDATA per bootloader increment for AT&T (and Cricket, if they get this model). I'll also upload any full builds if AT&T is the only carrier to get that specific build, because you won't be able to find the files anywhere else.
- For identifying USERDATAS, and to know what region/CSC to use in the firmware download tools if you're downloading yourself:
AIO = Cricket (not available via firmware download tools)
ATT = AT&T (not available via firmware download tools)
BST = Boost Mobile
CCT = Xfinity Mobile (Comcast)
CHA = Spectrum Mobile (Charter)
DSH = Dish Network
SPR = Sprint
TMB = T-Mobile
TMK = Metro PCS
USC = US Cellular
VZW = Verizon (available via firmware download tools, but Manual Entry is required - Auto will not work)
XAA = U1 firmware
- the correct procedure for switching from one carrier's firmware to another is:
1. Flash full U1 firmware package including non HOME CSC
2. Upon boot, insert a SIM of the carrier whose firmware you want
3. Watch for the popup that says "reboot to apply new carrier settings" etc, and do it
4. After that restart completes, reboot back to Download mode and flash the full U firmware package, with the USERDATA file of the carrier whose firmware you want

Initial U firmware and AT&T USERDATA are posted, along with U1 firmware. U firmware is not yet accessible in the firmware download tools like SamFirm and Frija, but if anyone wants a different carrier's USERDATA (for flashing bloatware to a U1 device or for converting a U device from one carrier's bloatware to a different one), let me know and I'll get it for you

Are the firmware in OP compatible for the S21 (Non-plus)?

craznazn said:
Are the firmware in OP compatible for the S21 (Non-plus)?
Click to expand...
Click to collapse
This thread is in the S21+ forum, not the S21 forum.
This thread is for model numbers G996U and G996U1, not G991U or G991U1.
If you're looking for S21 firmware, that will be found in the S21 forum

I agree with you

Does the firmware control the SIM lock? So, can you flash the U1-XAA firmware and use say a phone purchased from AT&T on another carrier? Or do you need to do the SIM unlock before flashing?

3BeersKen said:
Does the firmware control the SIM lock? So, can you flash the U1-XAA firmware and use say a phone purchased from AT&T on another carrier? Or do you need to do the SIM unlock before flashing?
Click to expand...
Click to collapse
SIM unlock always goes much deeper than firmware. Flashing U1 will never automatically unlock any model - the unlock has to be done separately. If desired, I can provide a recommendation for a professional 3rd party business to do the unlocking, for any interested users who may not meet the carrier's unlock requirement(s).

Thanks. That's what I figured, but wanted to make sure. I like to get off of the AT&T firmware as quickly as possible as you can't get their updates unless you have an active SIM in the phone.

3BeersKen said:
You can't get their updates unless you have an active SIM in the phone.
Click to expand...
Click to collapse
Correct. They're A-holes like that haha

iBowToAndroid said:
Correct. They're A-holes like that haha
Click to expand...
Click to collapse
I got TMobile s21+ and want flash to u1,do you know which odin should I use, thanks

yijinsa said:
I got TMobile s21+ and want flash to u1,do you know which odin should I use, thanks
Click to expand...
Click to collapse
3.14.1 patched

I don't have my S21+ yet but it will be here soon. I ordered from Samsung and selected the Verizon version as unlocked was considerably more expensive.
Does anyone know what Verizon specific bloatware the S21+ has?
Are there certain apps which can be uninstalled with the U1 version but not the Verizon U version?
Are there any potential speed benefits on the 5G network that would be lost using the U1 version, or features like tethering that won't work?
For updates in the future, would they arrive faster on the U1 version, slower, or the same?
My main purpose in flashing from U to U1 is to free up the maximum amount of space of the 128 GB while still retaining 100% of the speed and features I would have with the Verizon version.
Thank you for educating me! It's been a couple years since I flashed my Note 8.

I order a unlocked S21+ U1 version straight from Samsung and didn't have to put in any VZW info.
There is a buttload of Samsung bloatware but no VZW except fot MyVZX

Have anyone here with T-mobile version stuck on TMB/TMB/TMB after going to U1 firmware?
Someone over S21 Ultra have this problem, but I'm not sure if Android 11 tinker or T-mobile side. Used to be XAA/XAA/TMB

x1tymez said:
Have anyone here with T-mobile version stuck on TMB/TMB/TMB after going to U1 firmware?
Someone over S21 Ultra have this problem, but I'm not sure if Android 11 tinker or T-mobile side. Used to be XAA/XAA/TMB
Click to expand...
Click to collapse
Yes, that seems to be a common issue with T-Mobile S21s - all 3 models

iBowToAndroid said:
Yes, that seems to be a common issue with T-Mobile S21s - all 3 models
Click to expand...
Click to collapse
You think there will be a fix for this? It's weird that dialer codes also don't work.

x1tymez said:
Have anyone here with T-mobile version stuck on TMB/TMB/TMB after going to U1 firmware?
Someone over S21 Ultra have this problem, but I'm not sure if Android 11 tinker or T-mobile side. Used to be XAA/XAA/TMB
Click to expand...
Click to collapse
I've got a T-Mobile locked that I was able to get flashed over to U1 without much trouble. Shows mode number SM-G996U1 now, build number shows same.
edit: Nevermind, I see the TMB/TMB/TMB

krisology said:
You think there will be a fix for this? It's weird that dialer codes also don't work.
Click to expand...
Click to collapse
Dialer codes don't work? On which firmware?

iBowToAndroid said:
Dialer codes don't work? On which firmware?
Click to expand...
Click to collapse
XAA U1, VZW U1, stock TMB U, and I've tried the TLI U1 above and couldn't get it to work. Using google dialer, I input the codes like *#*#27262826#*#* and as soon as I type the last star it just disappears and nothing pops up. I tried with T-Mobile and Verizon sim.

krisology said:
XAA U1, VZW U1, stock TMB U, and I've tried the TLI U1 above and couldn't get it to work. Using google dialer, I input the codes like *#*#27262826#*#* and as soon as I type the last star it just disappears and nothing pops up. I tried with T-Mobile and Verizon sim.
Click to expand...
Click to collapse
Dialer codes usually don't work on VZW firmware, whether U or U1. But they almost always work on TMB and all others.
Have you tried *#06# ?