Hi all,
Yesterday I bought an S10e under the impression that it is sm-g970F.
Trying to flash Android 11 I discovered that it is actually sm-g970N.
Is there really a difference between them?
Should I be worried that some functions will be missing/unavailable?
Also, in the settings, it appears as g970F. How did the seller change it??
I have the same problem i tried to update the phone to the latest sm-g970f rom (figured if it's already installed it's possible)
And non of the roms flashed only when i decided to try latest sm-g970n rom it flashed however i bricked the phone and i have no idea what to do now.
almogkm said:
Hi all,
Yesterday I bought an S10e under the impression that it is sm-g970F.
Trying to flash Android 11 I discovered that it is actually sm-g970N.
Is there really a difference between them?
Should I be worried that some functions will be missing/unavailable?
Also, in the settings, it appears as g970F. How did the seller change it??
Click to expand...
Click to collapse
So after digging into the issue since i have the same problem here are my conclusions:
1. The phone is a Korean Variant G970N it is probably a renewed phone and not a new one.
apparently it's okay for an importer to take used phones (from Korea in this case) and replace all the cosmetics but of cause leaving the used MB.
Now here is what you should worry about, in order to flash the G970F Fixed Rom (there is no way you have updates) they used a Custom Kernel which means the phone was rooted and now Knox is tripped (this not reversible).
(Download Phone Info from play store and check knox if it shows 0x1 then your phone warrenty is void and some features won't be available any more for example - Samsung Pay).
So what should you do?
Well if you still have the option i would have demanded my money back!!
One thing that i am perplexed about is how in hell is this legal?!!!
If you no longer have this option or you want to keep the phone you have two option:
1. Flashing Korean Unbranded Firmware (KOO) which is pretty good it doesn't have bloatware or issues as far as i can tell, i only found one down side for it, the phone language selection is small but if you only need English (like any normal Human) then you are golden.
2. Keep the G970F ROM but bare in mind it will receive no updates and no security patches.
I am still looking for a proper way to flash G970F Firmware over G970N for now i haven't found any internet source that will confirm it's even possible.
So how did those importers\sellers did it, they probably flashed it with a Cellphone Lab Software (not Odin solution) and used a custom Kernel to fool Knox, like i said before this is practically a crime and i don't understand how can they sell used phones as new and get away with it!!!!
I had the same suspicions....
I'll try going to the lab that sold the previous owner the device and deal with them tho it looks like I just got scammed...
Sorry to bring this up again but I've just had an idea following JerryRigEverything's video:
What if I transplant SM-G970F components from a broken device that no longer works or in use in my SM-G970N which is supposedly new.
My N device is now bricked for some reason I couldn't solve, though my suspicion is that it has to do with incompatibility with the SIM card I use.
When my device did work, it worked great! ...besides battery issues that are most likely a result of the incompatibility aforementioned.
Will this work? If so, what components do I need? I already know I'll need the logic board but as seen in the video, there are several more antennas, should I just copy what Jerry did?
Vegetto32 said:
I have the same problem i tried to update the phone to the latest sm-g970f rom (figured if it's already installed it's possible)
And non of the roms flashed only when i decided to try latest sm-g970n rom it flashed however i bricked the phone and i have no idea what to do now.
Click to expand...
Click to collapse
Hi Vegetto,
I am from India and buy a galaxy S10e from UAE, It is showing G970F in the Phone's about but the problem is It is a G960N. Now, When I see in Sam Phone Info app there is Bootloader version - G970N, PDA Version - G970F, CSC G970F.
It is also a Knox tripped phone. Knox 0/1.
But if I see in Samsung code by typing in keypad *#12580*369#
it showing like all option in Odin:
BL: G970F
AP: G970F
CP: G970F
CSC: G970F
Does this means I can flash new Firmware on the list of SAM Mobile website, with G970F series firmware, It also showing in SAM Phone Info App that there latest firmware G970FXXSEFUL1/G970FOXMEFUJ2/G970FXXSEFUJ2.
I am in India right now.
Please help me, My email Id is -- [email protected]
It actually means you cannot flash SM-G970F the only roms you can flash are G970N.
Also if you want the phone to get security updates you must flash the original phones bootloader version, my suggestion download the G970N KOO firmware it's a global firmware. As for the knox it is tripped and there is nothing you can do about it.
Vegetto32 said:
It actually means you cannot flash SM-G970F the only roms you can flash are G970N.
Also if you want the phone to get security updates you must flash the original phones bootloader version, my suggestion download the G970N KOO firmware it's a global firmware. As for the knox it is tripped and there is nothing you can do about it.
Click to expand...
Click to collapse
How can I flash the original phone's bootloader version?
Where from I can download the original phone's G970N KOO Firmware and is it official Samsung Firmware?
How are they able to flash G970F? Is it custom Rom or do they use the original one?
I searched that my phone is using G970FXXS4BTB3 firmware which Vietnam XXV and same number found at https://www.sammobile.com/samsung/galaxy-s10e/firmware/SM-G970F/XXV/download/G970FXXS4BTB3/322678/ in an old update in 2020.
So see the attached screenshot, can I flash its latest version with odin. Of course, there is a chinese written in recovery mode installed when I go to its recovery mode for flashing with Odin.
I have a similar problem right now on my Korean S10E. Device is SM-G970N. I need it to be in Turkish. Only Themes item in Settings is in Turkish- very interesting- The rest is in English. App names are mostly Turkish Settings app name is in English.
The bootloader is unlocked but the phone is not rooted, Knox seems not tampered.
Could not start OTA update at first, I have upgraded a few versions from PC via Smartswitch. Just then noticed OTA also started downloading. The rest of the updates went on from the phone until upgrading to 12, there was a message like "All of the updates were not succesful." OTA update no longer responded. This time I turned back to Smart Switch. Update finished this time and finally I am at the latest version.
I only need Turkish in Settings. I used some ADB commands and an app called MoreLocale2. It did not work either. This has to be simple. Turkish exists. Keyboard is Turkish but not Settings. Quick links and most other things are strangely mixed English and Turkish.
How can I enable full Turkish?
Related
Hey guys!
Yesterday I got a Sprint carried S7 SM-930P as a gift. The only problem is that although it works flawlessly on my sim cards (I'm not in the US), I found out that the 930P won't get the 7.0 update. Is it possible to flash the G930U firmware without messing my phone up?
theevilpotato said:
Hey guys!
Yesterday I got a Sprint carried S7 SM-930P as a gift. The only problem is that although it works flawlessly on my sim cards (I'm not in the US), I found out that the 930P won't get the 7.0 update. Is it possible to flash the G930U firmware without messing my phone up?
Click to expand...
Click to collapse
I wouldn't do it unless your absolutely sure, I wouldn't be so sure if it's for a different model number. If they were able to have the same firmware flashed Samsung would just release it, they obviously didn't because it requires extra effort, pointing towards the conclusion that the firmware is not flashable on 930P
dylanneve1 said:
I wouldn't do it unless your absolutely sure, I wouldn't be so sure if it's for a different model number. If they were able to have the same firmware flashed Samsung would just release it, they obviously didn't because it requires extra effort, pointing towards the conclusion that the firmware is not flashable on 930P
Click to expand...
Click to collapse
You can flash it, i have done it myself. There are many guides over here that tell you how. All S7s in the USA are the same exact thing hardware wise, only the software (firmware) is different. Am currently running SM-G930U firmware on an SM-G930VL S7. @op the sprint s7 (SM-G930P) already has android 7 as of last 3 weeks
SM-G930P
micallan_17 said:
You can flash it, i have done it myself. There are many guides over here that tell you how. All S7s in the USA are the same exact thing hardware wise, only the software (firmware) is different. Am currently running SM-G930U firmware on an SM-G930VL S7. @op the sprint s7 (SM-G930P) already has android 7 as of last 3 weeks
Click to expand...
Click to collapse
Hi Guys. I just wanted to make sure i can do this to. Since i have the sprint version which I've already unlock. I don't mind the few bloatwares. But my issue is i can only hotspot to one device with my S7
If i flash a 930U firmware. Do you think it will solve my issue ?thanks in advance.. yeah btw since I'm not in the usa, So im not using sprint. I can't change that hotspot plan. If i want to make more devices connect..
Barniedjfuze said:
Hi Guys. I just wanted to make sure i can do this to. Since i have the sprint version which I've already unlock. I don't mind the few bloatwares. But my issue is i can only hotspot to one device with my S7
If i flash a 930U firmware. Do you think it will solve my issue ?thanks in advance.. yeah btw since I'm not in the usa, So im not using sprint. I can't change that hotspot plan. If i want to make more devices connect..
Click to expand...
Click to collapse
Yes it will, i am in belize with the U firmware and hotspot works great.
i was not able to to flash u firmware of s7 in sprint model g930p can any one help?
i use odin, u firmware of os 7 ,from sammobile,,, using odin i flash it ,, can any one help
pls help
SM-G930P converted to SM-G930U
Hey guys. I was able to flash the sm-g930u firmware downloaded from sammobile... the problem I have now.. I have a blank csc. No product code.. and on software updates it fails to register my device. Also in settings . I have some weird options. Which some of them are repeated. I will upload screenshots.. Also there's a system UPDATE option and also software option. Which one of them fails to register and the other only works with Wi-Fi. Should I revert back to my stock sprint firmware. If so do I need to wait for a firmware with same build date or newer. Because on sammobile haven't uploaded a firmware with a build date on par with the current install. Then I would have to wait right. ? If using a older firmware it will brick or do something to my phone ?
Barniedjfuze said:
Hey guys. I was able to flash the sm-g930u firmware downloaded from sammobile... the problem I have now.. I have a blank csc. No product code.. and on software updates it fails to register my device. Also in settings . I have some weird options. Which some of them are repeated. I will upload screenshots.. Also there's a system UPDATE option and also software option. Which one of them fails to register and the other only works with Wi-Fi. Should I revert back to my stock sprint firmware. If so do I need to wait for a firmware with same build date or newer. Because on sammobile haven't uploaded a firmware with a build date on par with the current install. Then I would have to wait right. ? If using a older firmware it will brick or do something to my phone ?
Click to expand...
Click to collapse
Did you flash all file in the SM-G930U folder (AP,BL,CSC,CP)? Because i did it with T-mobile,Verzion an it work fine
Thanks for the reply. Already solve.. what happen i flash home_csc. So ir was like that. But then i made a back up.. and flash again using the csc file. And all work perfect. At first phone was with the SPT csc.. then after i restored phone and pop in my sim it did something.. and now I'm with XAA csc. Works perfect. And could receive updates (phone registered). Just waiting for the july security patch update. Btw phone works better in every way.. battery even last longer..
Barniedjfuze said:
Thanks for the reply. Already solve.. what happen i flash home_csc. So ir was like that. But then i made a back up.. and flash again using the csc file. And all work perfect. At first phone was with the SPT csc.. then after i restored phone and pop in my sim it did something.. and now I'm with XAA csc. Works perfect. And could receive updates (phone registered). Just waiting for the july security patch update. Btw phone works better in every way.. battery even last longer..
Click to expand...
Click to collapse
Hey buddy.
i need some help here with that Home_CSC.
i'm from morocco and my phone is also unlocked to use my service provider SIM card ( maroc telecom) but I'm stuck at marshmallow 6.0.1
and I need to flash the U firmware to get rid of bloats and get OTAs but i don't want to screw something.
please can you make it clear what CSC to flash with ? and how so ? I mean like Screenshots.
and forgive my Noobie questions.
CSC flashing
ZaKaRia OuH said:
Hey buddy.
i need some help here with that Home_CSC.
i'm from morocco and my phone is also unlocked to use my service provider SIM card ( maroc telecom) but I'm stuck at marshmallow 6.0.1
and I need to flash the U firmware to get rid of bloats and get OTAs but i don't want to screw something.
please can you make it clear what CSC to flash with ? and how so ? I mean like Screenshots.
and forgive my Noobie questions.
Click to expand...
Click to collapse
Hey Buddy. I would recommend doing a full back up on your phone., using Smart Switch app
It saves all your numbers, message, etc..
Then proceed to flash the latest firmware for the Region or Provider. Using (CSC) not (home_csc) which means flashing the csc will wipe your phone data. Phone will be like new again. Proceed tru set up. Loggin in gmail. Proceed to update smart switch app if not found in apps. Then restore from the back up file. And good to go.
micallan_17 said:
You can flash it, i have done it myself. There are many guides over here that tell you how. All S7s in the USA are the same exact thing hardware wise, only the software (firmware) is different. Am currently running SM-G930U firmware on an SM-G930VL S7. @op the sprint s7 (SM-G930P) already has android 7 as of last 3 weeks
Click to expand...
Click to collapse
actually all S7 are not the same hardware fyi. The Sm-g930p has chipsets snapdragon and uses cpu procesaor quad core but the sm-g930F has the chipset Exynos8 cpu is octa-CORE the chipsets vary from these two. Flashing firmware for one chipset to the other may cause major problems bot to mention bootloops.. but I looked up sm-g930U and it uses the same processor as the P model.snapdragon
highhacker said:
actually all S7 are not the same hardware fyi. The Sm-g930p has chipsets snapdragon and uses cpu procesaor quad core but the sm-g930F has the chipset Exynos8 cpu is octa-CORE the chipsets vary from these two. Flashing firmware for one chipset to the other may cause major problems bot to mention bootloops.. but I looked up sm-g930U and it uses the same processor as the P model.snapdragon
Click to expand...
Click to collapse
He said all S7's in the USA are the same, which is correct. Exynos/930F isn't sold in the US, only way to get one is to grey import.
You can flash any USA model's firmware onto any other USA model because they're all the same hardware.
anyone running the 930p with current update how did you get around the binary 6 lock all the 930U firmware versions I can find are binary 4 I think t-mobile is 5. Anyone got links to a firmware we can push to sprint variants that are binary 6.
killerherts said:
anyone running the 930p with current update how did you get around the binary 6 lock all the 930U firmware versions I can find are binary 4 I think t-mobile is 5. Anyone got links to a firmware we can push to sprint variants that are binary 6.
Click to expand...
Click to collapse
You can't get around it. It is currently impossible to "downgrade" the bootloader binary version. All US carrier variants are version 4, except Sprint that is 6. You are stuck.
The only way it would ever be possible is if (a) one of the carriers, in a future software update, increases their bootloader version to 6, or (b) if someone figures out how to unlock the bootloader for the Snapdragon models.
Neither of those options is likely to happen, ever. You might get lucky and hope the G930U unlocked version has a higher number (it hasn't been released for Oreo yet), but I wouldn't bet on it.
quasihellfish said:
You can't get around it. It is currently impossible to "downgrade" the bootloader binary version. All US carrier variants are version 4, except Sprint that is 6. You are stuck.
The only way it would ever be possible is if (a) one of the carriers, in a future software update, increases their bootloader version to 6, or (b) if someone figures out how to unlock the bootloader for the Snapdragon models.
Neither of those options is likely to happen, ever. You might get lucky and hope the G930U unlocked version has a higher number (it hasn't been released for Oreo yet), but I wouldn't bet on it.
Click to expand...
Click to collapse
Well this is all very sad all this bootloader nonsense has me thinking Im done with samsung. I need to look for any phones where this nonsense isn't happening.
Removed
killerherts said:
Well this is all very sad all this bootloader nonsense has me thinking Im done with samsung. I need to look for any phones where this nonsense isn't happening.
Click to expand...
Click to collapse
Blame Sprint; there is really no reason for them to do what they did except keep users from switching their phone to another carrier. This isn't a Samsung thing. I don't believe you would be able to do this with any other Android phone, either (i.e. go backwards in bootloader versions).
Hi, I have just bought a brand new galaxy S7, model SM-G930F.
Although it is an international model, it carries a snapdragon 820 processor.
I am told , that it is a USA model, built under Verizon.
SM-G930F is supposed to be a global model with exynos, does anyone knoes what is the phone I bought?
Anyway, my real problem is, that the "updates software" option is missing, in "about phone" list.
I am stuck in android 6.0.1
I checked it is not rooted and it must be a genuine phone.
Can anybody guide me through solutions?
I would really appreciate any help.
Thank you
Moving to general S7 Q&A since you say it's a SM-G930F.
Check the back of the phone and verify the phone model. You should be able to update through other options like Kies, unless they've changed that recently.
Johntri said:
Hi, I have just bought a brand new galaxy S7, model SM-G930F.
Although it is an international model, it carries a snapdragon 820 processor.
I am told , that it is a USA model, built under Verizon.
SM-G930F is supposed to be a global model with exynos, does anyone knoes what is the phone I bought?
Anyway, my real problem is, that the "updates software" option is missing, in "about phone" list.
I am stuck in android 6.0.1
I checked it is not rooted and it must be a genuine phone.
Can anybody guide me through solutions?
I would really appreciate any help.
Thank you
Click to expand...
Click to collapse
It's not a G930F if it has a Snapdragon processor
Commonly faked to look like G930F by editing firmware / stickers / model numbers etc, more likely to be the G930V if it's Verizon
Boot to download mode and check the model number in there, that's the only one that can not be faked
(Volume Down & Home & power)
And they likely removed the update option from settings to prevent any problems of the phone updating to either the wrong firmware, or removing their fake edits with a V update
Flash the proper firmware with ODIN 3.12.3 or newer from updato.com once you know your model S7
Galaxy s7 "updates software" option missing
Dear Durham,
Thanks for the help.
Yes, you are right; it is G930V.I have been tricked...
I have visited updato.com and found 12 variants of S7 firmware.
My bootlader version is - 6.0.1 November 20, 16 USA (Verizon) (VZW) G930VVRU4API3
Shall I download and install this one and afterwards make a manual software update or
shall I install the latest - 7.0 August 25, 17 USA (Verizon) (VZW) G930VVRS4BQH1 ?
After successful installation, will these firmware fake modifications( to G930F) disappear permanently?
I am much obliged
Thanks
Johntri said:
Dear Durham,
Thanks for the help.
Yes, you are right; it is G930V.I have been tricked...
I have visited updato.com and found 12 variants of S7 firmware.
My bootlader version is - 6.0.1 November 20, 16 USA (Verizon) (VZW) G930VVRU4API3
Shall I download and install this one and afterwards make a manual software update or
shall I install the latest - 7.0 August 25, 17 USA (Verizon) (VZW) G930VVRS4BQH1 ?
After successful installation, will these firmware fake modifications( to G930F) disappear permanently?
I am much obliged
Thanks
Click to expand...
Click to collapse
The ROMs from updato.com are full ROMs so you can just flash the latest / newest one and you'll be 100% up to date once it boots
Use CSC and not HOME_CSC though as you are going to want to reset after the flash to clear any hacks from the previous ROM (This will wipe the device so backup any important files first)
CSC, AP, BL and CP
Yes this will permanently remove any modifications from the faked ROM
Wish me luck, I will give it a go!
You have been most informative, many thanks.
Good luck :good:
Johntri said:
Wish me luck, I will give it a go!
You have been most informative, many thanks.
Click to expand...
Click to collapse
The good news is that the verizon edition can be rooted and is network unlocked from the factory so as long as ure carrier supports the bands it will still work for you on a side note flash the u firmware not verizon and u wont have any verizon bloatware out of the gate either
Mad scientist, thank you for your intervention.
Just to be clear, which firmware do you suggest me to install, not the verizon G930V?
Could I install the G930F for my country (Europe).
I thought they are incompatible...
As my bootloader version G930V I think I would better stick with the V version.
Are you suggesting not to upgrade to nougat and reinstall factory installed 6.0.1 and better wait for 8?
Yes you are right, I am not good at twiking.Will I have drain baterry issues with nougat?
Dear Durham,
Emergency help!!!!
I installed it succesfully but now it does not recognize my sim card, as it is from a non USA country.
Should I reflash a different firmware? F or U ?
I am from Greece
It seems to be working...
The Verizon logo appears upon starting the phone
But in language selection, there is only English and asian languages available.
Software update finally appeared.
In order to have my langage back, should I reflash with the U ( unlocked version) or the F (global)?
No mobile data.
Maybe I am calling through Verizon.Roaming.Expensive.Scarry...!!
He means that the G930U firmware will flash fine on the G930V, it is the same firmware but without the Verizon bloatware added
You can not flash any other firmwares, it just happens that those two are compatible with each other
Flash straight to the latest
So I shall flash the G930U?
Will my sim card be recognized and mobile data be active.
Nougat 7 or MM 6-your opinion, again?
thnks
No idea if your SIM will be recognised, but if it's not working with the V firmware it's worth a try
As I said, flash the latest firmware which is Nougat
Personally I would be contacting the seller and asking for a refund / exchange for a real G930F that you paid for
firmware
I tried, but he is not cooperative.
How about F version-it worked with it before ?
(only it was modified with the dissapearance of system update.)
Johntri said:
I tried, but he is not cooperative.
How about F version-it worked with it before ?
(only it was modified with the dissapearance of system update.)
Click to expand...
Click to collapse
No you cannot flash any other model firmware, that was NOT the G930F firmware, it was a hacked / faked U or V firmware
I think you better read a good few threads before going much further or you're going to end up with a brick
Contact the seller and request a refund
Don't suppose you can flash CSC files of the 930F on 930V?
Dear all,
Thank you for your help and interest in my problem.
This is indeed a great forum!!!
I tried to flash the F version, but thankfully odin stopped it from the beginning, presenting "failed" message.
I suppose if it continued, I would end up with a brick as Durham suggested.
Finally I flashed he U version, as mad scientist suggested, and up to now it works like a charm.
As Durham advised, I used CSC and not HOME_CSC and the hack was eliminated.
Sim card is recognized, no bloatware and mobile data working.
Let's hope it will continue like this...!!!
Only glitch, not everything is in my home language ( message icon name and in settings-the menu options-any idea how to fix it? - I removed english and left only my language as selection, but onle these remain untranslated)-small problem
I have learned a valuble lesson from my adventure.
Ebay, an organized platfrom may it be, it cannot control each individual's deceivals, so one must be extra wary when buyng from unofficial sources, nomatter good reviews from others...
Thanks again to you all for your help, I would be in serious position right now, if it weren't for you guys.
Hi Everyone,
I bought Samsung Galaxy S7 Duos from Dubai.
The phone becomes so annoying as it has some kind of Adware built-in, which always opens different kinds of websites, pop-up ads and PlayStore links (after every few minutes).
I tried every possible way to get rid of it but nothing useful, even the factory reset or hard rest doesn't work. Because the OS it self is buggy.
According to its Settings, the phone has Model No. SM-G930FD, and Android 7.0
Now I want to install the fresh and updated firmware, so I can free my self from this Adware and can enjoy Android 8.0
I have downloaded Android 8.0 firmware for SM-G930FD
I tried Odin to install this new firmware but encountered a new issue:
According to Phone's Download Mode, the phone model is SM-G930S instead of SM-G930FD
This means someone installed the local ROM on the Korean Phone. (am I right?)
Now when I'm trying to install Android 8.0 firmware for SM-G930FD (of any other region) it shows the error:
"Secure Check Fail: (PIT)"
I am out of ideas on what to try next
Whatever it says in download mode is what the phone actually is, everything else has been faked.
It's a common scam to use modified firmware to make a phone appear to be a different model, as some models sells for more than others.
This is likely what has happened to you, and also the cause of the apparent adware.
Stock G930F or FD firmware will bootloop a G930S, which is probably why Odin is refusing. You would either need to flash stock G930S firmware, or use a custom ROM compatible with G930S
Beanvee7 said:
Whatever it says in download mode is what the phone actually is, everything else has been faked.
It's a common scam to use modified firmware to make a phone appear to be a different model, as some models sells for more than others.
This is likely what has happened to you, and also the cause of the apparent adware.
Stock G930F or FD firmware will bootloop a G930S, which is probably why Odin is refusing. You would either need to flash stock G930S firmware, or use a custom ROM compatible with G930S
Click to expand...
Click to collapse
Thank you for the clarification
Now when I'm sure that my phone has G930S model, the option of stock ROM is only one: Android 8.0, Korea (SK Telecom)
1. By Googling a lot about this scam I'm afraid that changing the ROM may covert the phone into Single SIM version!
2. And if I install Korea (SK Telecom) ROM, will it lock the phone to Korean network only?
3. Do you think that "Korea (SK Telecom) ROM" will change everything into Korean?
Can you please clear my doubts
I don't know enough about the Korean stock ROM to answer those unfortunately.
But I do know many custom ROM's are compatible with G930F/FD and S, so I would assume allow dual SIM.
Hello,
I bought an S7 from eBay, it was marked as a "new" and "UK" phone. I factory reset the device on receipt and apparently worked fine to start with. However, there have been a few problems (poor signal, battery life, echoes in video calls) and I noticed the device was still on Android 6, so wondered if an update to Android 8 might help (?).
There is no menu option available to update Android so I started looking into flashing firmware. On further digging, the device seemed an official SM-G930F but "United Arab Emirates" appears in the "About Phone" section.
I downloaded some stock firmware (Android 8, UK Vodafone which is the network I expect to run it on) and tried flashing with Odin 3.13 and it failed with error "unsupport dev_type" on the phone screen. Any suggestions?
I also noticed that in "Download mode" the phone said it was a "SM-G930V". I wondered if this was why the flash had failed. For the SM-G930V I only seem to be able to get USA/Verizon stock firmware. Might this work or would I have trouble using this in the UK?
Any help would be much appreciated. I'm a newbie in this area so apologies if any of these questions are answered elsewhere.
Many thanks,
Edwin
ecc25 said:
Hello,
I bought an S7 from eBay, it was marked as a "new" and "UK" phone. I factory reset the device on receipt and apparently worked fine to start with. However, there have been a few problems (poor signal, battery life, echoes in video calls) and I noticed the device was still on Android 6, so wondered if an update to Android 8 might help (?).
There is no menu option available to update Android so I started looking into flashing firmware. On further digging, the device seemed an official SM-G930F but "United Arab Emirates" appears in the "About Phone" section.
I downloaded some stock firmware (Android 8, UK Vodafone which is the network I expect to run it on) and tried flashing with Odin 3.13 and it failed with error "unsupport dev_type" on the phone screen. Any suggestions?
I also noticed that in "Download mode" the phone said it was a "SM-G930V". I wondered if this was why the flash had failed. For the SM-G930V I only seem to be able to get USA/Verizon stock firmware. Might this work or would I have trouble using this in the UK?
Any help would be much appreciated. I'm a newbie in this area so apologies if any of these questions are answered elsewhere.
Many thanks,
Edwin
Click to expand...
Click to collapse
Go to the play store and install Sam phone info, then look at what chipset it lists, you don't want it to be Qualcomm Snapdragon, Eyxnos is what you want to see.
G930V is US Verizon firmware
Report back please.
cooltt said:
Go to the play store and install Sam phone info, then look at what chipset it lists, you don't want it to be Qualcomm Snapdragon, Eyxnos is what you want to see.
G930V is US Verizon firmware
Report back please.
Click to expand...
Click to collapse
Thanks for your reply! The "hardware/board" is "qcom/msm8996". Where does that leave me?
I noticed that the Bootloader & Baseband Versions begin G930VVRU but the PDA and CSC versions begin G930FXXU. Not sure if that means anything.
Thank you!
ecc25 said:
Thanks for your reply! The "hardware/board" is "qcom/msm8996". Where does that leave me?
I noticed that the Bootloader & Baseband Versions begin G930VVRU but the PDA and CSC versions begin G930FXXU. Not sure if that means anything.
Thank you!
Click to expand...
Click to collapse
Well the person who sold it to you is a liar for starters, it's not a "brand new UK device", it's a US S7 (G930V) Originally bought for the Verizon Network in the states. They are difficult to do anything with as the Qualcomm boot loader is locked down.
So your first option is to update the firmware to the latest Verizon Oreo, probably not worth it since that firmware is designed to work on a couple of frequencies only.
Next option is to flash unbranded US firmware with a modified version of Odin that ignores mismatch devices etc and just installs the firmware. You will need to use this version of Odin from this thread >>> here Odin 13 PatchD.zip is the one you want.
Unzip, run Odin, place phone into download mode flash firmware. You will need to download G930U from Sammobile or undato.com The 3 letter code should either be USC or XAA.
Any questions please ask.
Also before flashing please remove you google account off the phone.
cooltt said:
Well the person who sold it to you is a liar for starters, it's not a "brand new UK device", it's a US S7 (G930V) Originally bought for the Verizon Network in the states. They are difficult to do anything with as the Qualcomm boot loader is locked down.
So your first option is to update the firmware to the latest Verizon Oreo, probably not worth it since that firmware is designed to work on a couple of frequencies only.
Next option is to flash unbranded US firmware with a modified version of Odin that ignores mismatch devices etc and just installs the firmware. You will need to use this version of Odin from this thread >>> here Odin 13 PatchD.zip is the one you want.
Unzip, run Odin, place phone into download mode flash firmware. You will need to download G930U from Sammobile or undato.com The 3 letter code should either be USC or XAA.
Any questions please ask.
Also before flashing please remove you google account off the phone.
Click to expand...
Click to collapse
Thank you for these detailed instructions -- much appreciated!
Presumably using this version of Odin carries a high risk of bricking the phone if I get anything wrong?
Out of interest, what's the reason for removing the Google account?
Cheers,
Edwin
ecc25 said:
Thank you for these detailed instructions -- much appreciated!
Presumably using this version of Odin carries a high risk of bricking the phone if I get anything wrong?
Out of interest, what's the reason for removing the Google account?
Cheers,
Edwin
Click to expand...
Click to collapse
Because it's a further complication with FRP lock you just don't need after flashing. Just add the google account after flashing and your good to go.
With regards to flashing yes there's always a risk that something can go wrong, that's why you take your time and follow the steps exactly. In your case it's pretty straight forward and remember nothing changes on the external SD card, so anything you want to keep can be moved there before flash.
I would also mention that theoretically you could flash UK unbranded (BTU) but it's for G930F Exynos devices so best at this stage just get the device on unbranded Qualcomm and working on UK networks.
let me know how it goes.
cooltt said:
Because it's a further complication with FRP lock you just don't need after flashing. Just add the google account after flashing and your good to go.
With regards to flashing yes there's always a risk that something can go wrong, that's why you take your time and follow the steps exactly. In your case it's pretty straight forward and remember nothing changes on the external SD card, so anything you want to keep can be moved there before flash.
I would also mention that theoretically you could flash UK unbranded (BTU) but it's for G930F Exynos devices so best at this stage just get the device on unbranded Qualcomm and working on UK networks.
let me know how it goes.
Click to expand...
Click to collapse
Hello,
I've just tried doing what you suggested (I think!) and I got a failure. Odin said "FAIL! (Auth)" and the phone said "Secure check fail: apnhlos". I tried rebooting and got a security error. So I tried Odin again and it passed.
However, now the phone won't boot, it alternates between "Samsung Galaxy S7" and a blank screen. In recovery I get:
"#fail to open recovery_cause(No such file or directory)#"
#Reboot Recovery Cause is [UNKNOWN]#
No Support SINGLE-SKU
File-Based OTA
Supported API: 3
dm-verity verification failed..."
Any ideas?
Thanks a lot,
Edwin
ecc25 said:
Hello,
I've just tried doing what you suggested (I think!) and I got a failure. Odin said "FAIL! (Auth)" and the phone said "Secure check fail: apnhlos". I tried rebooting and got a security error. So I tried Odin again and it passed.
However, now the phone won't boot, it alternates between "Samsung Galaxy S7" and a blank screen. In recovery I get:
"#fail to open recovery_cause(No such file or directory)#"
#Reboot Recovery Cause is [UNKNOWN]#
No Support SINGLE-SKU
File-Based OTA
Supported API: 3
dm-verity verification failed..."
Any ideas?
Thanks a lot,
Edwin
Click to expand...
Click to collapse
Ok, so try an earlier G930V firmware and please make sure you are placing the file in the right places with Odin. The US carriers have all updated their firmware and often closes the loophole which allows the patched Odin to work. Then it's just a question of waiting until someone develops a workaround again.
Also you can pick up an S7 from ebay for about £100 now, your always going to have problems with a qualcomm device on UK networks. Where about are you in the UK?
cooltt said:
Ok, so try an earlier G930V firmware and please make sure you are placing the file in the right places with Odin. The US carriers have all updated their firmware and often closes the loophole which allows the patched Odin to work. Then it's just a question of waiting until someone develops a workaround again.
Also you can pick up an S7 from ebay for about £100 now, your always going to have problems with a qualcomm device on UK networks. Where about are you in the UK?
Click to expand...
Click to collapse
Thanks! Actually shortly after posting I found a suggesting of using CSC not HOME_CSC, which enabled the flash to work (at the expense of phone data, as expected).
The device still does have a few issues though, as you predicted. Is the radio hardware different for Qualcomm? Might need to buy another then. Any advice to avoid being scammed on eBay again?!
Thanks so much!
ecc25 said:
Thanks! Actually shortly after posting I found a suggesting of using CSC not HOME_CSC, which enabled the flash to work (at the expense of phone data, as expected).
The device still does have a few issues though, as you predicted. Is the radio hardware different for Qualcomm? Might need to buy another then. Any advice to avoid being scammed on eBay again?!
Thanks so much!
Click to expand...
Click to collapse
Well you could flash G930U which opens up all of the radios for the US and you may have less issues but US and European devices have different chips so your never going to be able to flash any EU generic firmware. I'm addition the US and Europe are different cellular regions with different operating frequencies. You can get by with what you have but never get full functionality.
I think you were just unlucky with this phone on ebay, there are plenty which are genuine EU region devices.
Hey Guys, I am in desperate need of help.
So I bought the note 20 ultra (model N986-U) from a seller in Texas (I live in Canada). The phones original csc code was ATT/ATT/ATT. I have a rogers sim card (csc code RWC). I noticed the phone is still stuck on One UI 2.5 because I am not connected to the ATT network.
So I tried changing the CSC using SamKey. I bought some credits, followed the steps and now for some reason my CSS is XAA/XAA/ATT.
I understand now that my phones model does not have a RWC firmware. Frija can't find the software for the SM-N986U running RWC but has no problem finding the software for the SM-N988W running RWC.
Is there any way for me to update my phone without bricking it? In an ideal world I would get OTA updates. Can I download the CSC_HOME file from the SM-N986W and flash it on my SM-N986U?
I'm really sorry for the noobish questions, I read so many threads and watched so many videos but I don't have the balls to experiment with such an expensive phone.
I know you can flash U1 firmware on a U device without any issues.
That's what I did to mine.
As for flashing W software on a U/U1 device, it's technically possible considering they are identical hardware, but I cannot say for sure what impacts it might have to the phone's performance.
You can always manually flash current U firmware.
rjohnstone said:
I know you can flash U1 firmware on a U device without any issues.
That's what I did to mine.
As for flashing W software on a U/U1 device, it's technically possible considering they are identical hardware, but I cannot say for sure what impacts it might have to the phone's performance.
You can always manually flash current U firmware.
Click to expand...
Click to collapse
Hey thanks for the answer,
I ended up flashing the W firmware on the phone and it worked flawlessly! Now the phone shows that it's a model N986W. OTA updates still don't work tho, even though the csc shows RWC
tripleaaa123 said:
Hey thanks for the answer,
I ended up flashing the W firmware on the phone and it worked flawlessly! Now the phone shows that it's a model N986W. OTA updates still don't work tho, even though the csc shows RWC
Click to expand...
Click to collapse
Glad it worked. Grab the latest firmware for RWC and then wait for the next update. (N986WVLU1DUB5)