Related
Hi all, got an update this morning for the baltic variant of kit kat.
27mb
Sent from my SM-N9005 using XDA Premium 4 mobile app
Details from my Note 3
Sent from my SM-N9005 using XDA Premium 4 mobile app
Downloading...
Off the 3 official kitkat 4.4.2 roms I have tested, Switzerland & Poland & Baltic, I find the Baltic one the best.
At least I get to use kitkat before the BTU variant is released,as long as I use the official sam-mobile firmware, basically I can test the different country variants of the new kitkat 4.4.2 without fear of tripping knox, and I still get the OTA updates.
Did you check your CSC?I had Netherland 4.4.2 PHN-N9005XXUENA6 and after i see what you write here i flash Baltic SEB-N9005XXUENA6 for the OTA update.Everything went ok but after i get the update now it's Poland new version CSC:NB1 (XEO).
Before update...
After update...
But here you don't see the CSC.You must install phone info and there you can see what country you have.
orly_mihai said:
Did you check your CSC?I had Netherland 4.4.2 PHN-N9005XXUENA6 and after i see what you write here i flash Baltic SEB-N9005XXUENA6 for the OTA update.Everything went ok but after i get the update now it's Poland new version CSC:NB1 (XEO).
Click to expand...
Click to collapse
Hi orly.
Didn't see that, weird? why would an update change the CSC back to Poland, my CSC also shows N9005OXXENB1 and kies still says its an official version?
So to try to understand process I did a wipe cache and wipe data in recovery and it still shows N9005OXXENB1, so I re flashed Baltic ROM again and it now shows CSC N9005OXXENA5, now when I plug my note 3 into kies it says it wants to change it back
Just realised that the CSC has changed but both were the same XEO!
See screen dump.
Yes it's like mine.But the problem is that i have the Baltic CSC and now i have the Polonian CSC. Only with OTA update.
orly_mihai said:
But here you don't see the CSC.You must install phone info and there you can see what country you have.
Click to expand...
Click to collapse
To see CSC put in *#1234# in phone dialer
I will flash the Switzerland ROM again after tea and report back, I am guessing that the first kitkat ROM you flash is the CSC you get stuck with unless you root, and the CSC variations are only small software programs that are country specific like the Switzerland ROM. As I flashed the first official Poland ROM I am stuck with XEO.
The core features like like say having 4G in settings are ROM specific not the CSC files, which is why I swapped between all the 3 kitkat versions I have tested..
My first rom was a baltic 4.3 with that one i bought the Phone.First time i have Baltic CSC then uk CSC after flash i made a full wipe and then Netherland CSC. I verify in kies3.
Phew..
So I flashed the Switzerland ROM again and my CSC is now N9005PHNENA2, I tried hard reset from menu and hasen't changed, plugged into pc for kies and says its latest? So I was wrong you can change the CSC it appears?
Which is great as I am waiting for the BTU variant this month hopefully.
I told you. Only on my s3 i need a software for change csc. It mean That you flash a old firmware. You didnt trip Knox?
orly_mihai said:
I told you. Only on my s3 i need a software for change csc. It mean That you flash a old firmware. You didnt trip Knox?
Click to expand...
Click to collapse
Hi orly.
No my Knox fine, as long as I use official 4.4.2 ROM's. Now on latest Poland ROM.
@gadjet Just to clarify, you flashed the official polish rom with odin and knoxx wasnt tripped? If so what odin version did you use?
SPYRO80 said:
@gadjet Just to clarify, you flashed the official polish rom with odin and knoxx wasnt tripped? If so what odin version did you use?
Click to expand...
Click to collapse
I have never been rooted on my Note 3, and I only flashed official firmware from samfirmare.com, not posted ones on XDA just in case, I use odin 3.09
You can see from my previous screen dumps while I flashed different variants this week, and I include a screen shot from my note 3 as of today with the latest Poland ROM.
I've flashed Official Poland 4.4.2 Feb 2014 too... just curious can you install an application from APK files ? I seems having problems not able to do it short while after Factory Reset... already enable in setting thou but still the Install bar can't be click...
? SM-N9005 @ Tapatalk ?
Yes you can.But first you must enable from settings unknown sources.Everything it's ok no wifi drop or something else sayed somebody.
New Poland ROM has same problems for me as first Poland release, i.e.. screen off f-ups and wake lock problems, phone does random lock ups when switching screen back on, and no buttons seem work for a few seconds and screen blank, capacitive buttons sometimes light up? I had to hold power button down for 10 seconds once to get a re boot!
So I am flashing back to the Baltic ROM again.
I currently have Galaxy S6 G920FD. I prevously I am on 5.0.2 with CSC:GLB (Countryhilippines, Network:Globe). I successfuly flashed the French 5.1.1 ROM. Now I flashed back to my native Globe 5.1.1. Problem is the CSC is Thailand and not Globe. How do I change the CSC without root? Tried going to Recovery mode doing full cache wipe and full reset but still it sets the Thailand CSC. Thank you very much.
roydok said:
I currently have Galaxy S6 G920FD. I prevously I am on 5.0.2 with CSC:GLB (Countryhilippines, Network:Globe). I successfuly flashed the French 5.1.1 ROM. Now I flashed back to my native Globe 5.1.1. Problem is the CSC is Thailand and not Globe. How do I change the CSC without root? Tried going to Recovery mode doing full cache wipe and full reset but still it sets the Thailand CSC. Thank you very much.
Click to expand...
Click to collapse
hello there. just would like to revive your thread as am exactly in the same situation now..
glb->xfe->glb, wipe/full reset with each flash, but csc is now stuck at thl..
how's your s6 duos now? what did you do? tia
no-one has info on this?
Hi,
I have a weird issue. Once I updated my galaxy s6 trough odin, I never receive updates anymore. I flashed the xef version on my and even my mothers galaxy s6. Neither gets updates any more.
Also, I can't open up the service menu when I type *#0# or any of the codes.
My mother's phone was brand new and I guess my phone is from the same region (it was originally LUX (Belgium)).
Does someone have an idea how I can make my phone receive updates again and how I can enter the service menu?
Thanks in advance!
Hi,
I flashed XEF 6.0 upon release. Now i'm back to my stock CSC LUX and have received updates regularly the past months.
My device was also originally a LUX device.
I recommend you should revert back to LUX ?
Unless there are some disadvantages...
Merken_ said:
Hi,
I flashed XEF 6.0 upon release. Now i'm back to my stock CSC LUX and have received updates regularly the past months.
My device was also originally a LUX device.
I recommend you should revert back to LUX ?
Unless there are some disadvantages...
Click to expand...
Click to collapse
Thanks! Ill try it
Merken_ said:
Hi,
I flashed XEF 6.0 upon release. Now i'm back to my stock CSC LUX and have received updates regularly the past months.
My device was also originally a LUX device.
I recommend you should revert back to LUX ?
Unless there are some disadvantages...
Click to expand...
Click to collapse
Thanks again man! I flashed a LUX file and had ota update when I searched for it. Also, I can now enter service menu.
So if anyone has similar problems, flash back to your original csc. What was the original csc you ask? Well download the samsung phone info app. Go to the csc code tab. The productcode ends with 3 letters. Mine is LUX. Yours could be different. That's the one that you need to flash. Good luck!
If you flash a rom which doesnt have csc code that you have before you need to wipe data factory reset and wipe cache through original recovery once its done you can get ota updates
enesuzun2002 said:
If you flash a rom which doesnt have csc code that you have before you need to wipe data factory reset and wipe cache through original recovery once its done you can get ota updates
Click to expand...
Click to collapse
Thanks for the info! I indeed didn't factory reset my phone after the update. (Didn't want to lose my media and settings.)
Hi everybody, I do not know if there is some discussion open yet but I can not speak and write so much in English.
I come to the problem already written on the SAMSUNG ASSISTENZA forums without solving anything, the only solution to bring it into service.
Ok I have a Samsung S6 SM-G920F which now works only with 2g network, with 3g and 4g network does not work, has field but does not surf.
These tests have been carried out:
Tested SIM sim card on another phone works.
Try other cards on my phone do not work.
Done Update ITV has solved nothing.
Tried other roms I now have French Android firmware 7.0 (I've read that many have solved) flashing and hard reset all the same problem.
I have no root.
Other evidence, removed the board inserted another card nothing.
Changed APN manually.
Restore Factory Settings.
Restore network settings.
The problem has never been resolved.
Here you are a lot better in the world, maybe you know how to do it and thank you.
Sorry for my English but I used Google Translate
Did you tried to flash only modem...?
Maybe that can solve the problem, not shure....!
And better to flash the stock rom that device had when you bought it
vforvlive said:
Did you tried to flash only modem...?
Maybe that can solve the problem, not shure....!
And better to flash the stock rom that device had when you bought it
Click to expand...
Click to collapse
I tried to change only the modem I did not solve anything ....
MikiGra said:
I tried to change only the modem I did not solve anything ....
Click to expand...
Click to collapse
Ok....
Last time try this
1. Wipe everything
2. Flash via latest Odin stock last BTU or DBT 6.0.1 firmware
3. Wipe again and restart
vforvlive said:
Ok....
Last time try this
1. Wipe everything
2. Flash via latest Odin stock last BTU or DBT 6.0.1 firmware
3. Wipe again and restart
Click to expand...
Click to collapse
Ok two questions:
1 Can I flash the original modem of the device even if I have android 7.0?
2 what do you mean by "2. Flash via latest Odin stock last BTU or DBT 6.0.1 firmware" what is BTU or DBT ... sorry i do not understand some terms
MikiGra said:
Ok two questions:
1 Can I flash the original modem of the device even if I have android 7.0?
2 what do you mean by "2. Flash via latest Odin stock last BTU or DBT 6.0.1 firmware" what is BTU or DBT ... sorry i do not understand some terms
Click to expand...
Click to collapse
1. you can try, i think it will fitt
2. BTU = United Kingdom, DBT = Germany
they are bouth unbranded firmwares
vforvlive said:
1. you can try, i think it will fitt
2. BTU = United Kingdom, DBT = Germany
they are bouth unbranded firmwares
Click to expand...
Click to collapse
Ok ok, understand, perfect.
I noticed unpacking the firmware ITV Italia no brands that until December had a modem, modem.bin then in the next releases the modem has always been updated, since December I got the problems.
As you said you might be the file modem.bin thread that does not work well.
I tried with Odin 3.12.3 to mount the only modem.bin file in CP .... just do not install me Odin is stuck before downloading it on the phone.
Do you know how to do it and why do not you install me?
I'll try to do this and then if it's okay I'll go to the Firmware BTU or DBT .... I think the modem is the problem too because the rest of the phone works and goes only in 2G/Edge
Thanks !!!!!!!!!!!!
Ciao vforvlive
Then I tried how you said to wipe ... install the DBT 6.0.1 firmware of the latest in germany and then wipe again nothing works .... only working with 2g network.
I just noticed that H + just keeps the uploaded arrow down there is virtually no data exchange.
I also tried to put the modem.bin file when my phone worked with odin not installing me.
It's absurd I changed 20 firmware nothing ever does the same thing.
It is not even the antenna or some other thing because in 2g it normally works it obviously travels like a snail.
vforvlive said:
1. you can try, i think it will fitt
2. BTU = United Kingdom, DBT = Germany
they are bouth unbranded firmwares
Click to expand...
Click to collapse
Then I tried how you said to wipe ... install the DBT 6.0.1 firmware of the latest in germany and then wipe again nothing works .... only working with 2g network.
I just noticed that H + just keeps the uploaded arrow down there is virtually no data exchange.
I also tried to put the modem.bin file when my phone worked with odin not installing me.
It's absurd I changed 20 firmware nothing ever does the same thing.
It is not even the antenna or some other thing because in 2g it normally works it obviously travels like a snail.
I am also facing the same issue and did not find any solution yet. If you have more info please share it
Hello, I've been waiting a really long time for One UI 5 and I couldn't wait anymore once I heard the stable is out in India. I downloaded the INU firmware using Frija then I changed my CSC to INU using SamFwRP tool and flashed the INU firmware using patched Odin. Then I reverted back my CSC to EUX again with SamFwRP.
After all of this, finally did a wipe cache and factory reset. Now I'm wondering...since my CSC is back to EUX...will I still receive OTAs ? For example One UI 5.1 OTA or December security patch whenever that releases
EDIT: Weirdest thing is when I flashed INU HOME_CSC on my phone there was no data that was reset. Is it because they're both OXM ?
EDIT2: DISCLAIMER - I'm not an Android dev, I'm not knowledgeable on anything technical or otherwise. Please take advice from anyone else but me!
Thanks for the tip about Frija, I had forgotten all about that one (been checking sammobile and galaxyfirmware daily for weeks now) I'm downloading now and will edit this post with success or failure! (I'm EUY)
As for your question about still receiving OTAs or not, I honestly don't know because I've rooted every phone I've ever had in 17 years! but I can't see why it would be a problem if you didn't receive them as you can always download them from Frija surly not?
Okay download complete, I'm going in.. wish me luck!
beanbean50 said:
Thanks for the tip about Frija, I had forgotten all about that one (been checking sammobile and galaxyfirmware daily for weeks now) I'm downloading now and will edit this post with success or failure! (I'm EUY)
As for your question about still receiving OTAs or not, I honestly don't know because I've rooted every phone I've ever had in 17 years! but I can't see why it would be a problem if you didn't receive them as you can always download them from Frija surly not?
Okay download complete, I'm going in.. wish me luck!
Click to expand...
Click to collapse
Well yeah, you can. But I don't wanna lol. I'm not a ROM hax0r. I'm just a power user. I don't even have a Windows laptop around most of the time and Heimdall looks scary .
Is EUY the same as EUX ? I saw it on the firmware websites...but I never heard about it. Is it for France or something ? Rest of the EU uses EUX as far as I know.
I think EUX, EUY, INU are just the same ****, not sure. They all have OXM Multi CSC and they kinda look identical tbh as far as numbers go. So if you revert your CSC back to EUY...updates should work, no ?
Success!
I just flashed the Magisk patched AP file the CP file and HOME CSC file and all up and running Android 13/One UI 5... (also rooted) thanks bro..
I think if you revert your CSC back to EUY then yes I can't see any reason why you shouldn't receive OTAs
thought it was too good to be true, keep getting a service provider update required (but it won't update) and access denied here and there. can't even odin flash back to Android 12 for some strange reason hmm
It's working perfectly for me. Have you reverted CSC ? And deleted cache and factory reset after flashing. I have literally 0 errors and 5G works. But I deleted did a wipe cache and factory reset and reverted CSC as well
beanbean50 said:
thought it was too good to be true, keep getting a service provider update required (but it won't update) and access denied here and there. can't even odin flash back to Android 12 for some strange reason hmm
Click to expand...
Click to collapse
Wrote a comment
What Odin version too ? I used the latest PatcheD version from here: https://forum.xda-developers.com/t/patched-odin-3-13-1.3762572/
XME - Malaysia released OneUI 5 Android 13 for Z Flip 3
This is how my INU firmware with EUX CSC looks.
case81 said:
What Odin version too ? I used the latest PatcheD version from here: https://forum.xda-developers.com/t/patched-odin-3-13-1.3762572/
Click to expand...
Click to collapse
tried that one as well, it flashed and booted okay but with tons of errors, luckily I managed to get back to Android 12 and will stay there till the EUY update comes along.
beanbean50 said:
tried that one as well, it flashed and booted okay but with tons of errors, luckily I managed to get back to Android 12 and will stay there till the EUY update comes along.
Click to expand...
Click to collapse
Tons of errors ? Where ? Just curious if I have them as well
case81 said:
Tons of errors ? Where ? Just curious if I have them as well
Click to expand...
Click to collapse
I think it's to do with trying to root it. It detects root and denies access to the PC, to update the service provider and many more things something like 'we have detected a tampered device, please contact your customer service'
beanbean50 said:
I think it's to do with trying to root it. It detects root and denies access to the PC, to update the service provider and many more things something like 'we have detected a tampered device, please contact your customer service'
Click to expand...
Click to collapse
So...this happens when changing CSC ?
case81 said:
So...this happens when changing CSC ?
Click to expand...
Click to collapse
All okay now must have been gremlins .. I think it detects your CSC when installing, it reads your simcard.
Thanks for this thread!
It worked very well for me. Factory reset is a chore after, but everything works and I haven't had any issues so far. I do not root, so nothing to report about that.
Installed the firmware on my BTU phone
Works wonder 0 errors or issues
did Samsung and google cloud backups before flashing during setup restored both and its as if I never did a thing everything was put in its place and it was the most effortless phone setup I ever did
Now I'm just enjoying my android 13
case81 said:
Hello, I've been waiting a really long time for One UI 5 and I couldn't wait anymore once I heard the stable is out in India. I downloaded the INU firmware using Frija then I changed my CSC to INU using SamFwRP tool and flashed the INU firmware using patched Odin. Then I reverted back my CSC to EUX again with SamFwRP.
After all of this, finally did a wipe cache and factory reset. Now I'm wondering...since my CSC is back to EUX...will I still receive OTAs ? For example One UI 5.1 OTA or December security patch whenever that releases
EDIT: Weirdest thing is when I flashed INU HOME_CSC on my phone there was no data that was reset. Is it because they're both OXM ?
Click to expand...
Click to collapse
Hi, flashing the home-csc does not restore the phone to factory settings ( wipe data etc ) If you flash the csc, then your phone will be wiped and restored as it was out of the box. Also you dont have to change CSC, i'm on XSA and I flashed the IDU firmware.... This does not chage the CSC of the phone anyway. A lot of the Samsung firmware are multi - CSC these days.
noel_leon said:
Thanks for this thread!
It worked very well for me. Factory reset is a chore after, but everything works and I haven't had any issues so far. I do not root, so nothing to report about that.
Click to expand...
Click to collapse
I'm not sure you actually have to do it. I'm just a big giant noob with no knowledge in Android, this is why I did all that
slysurfer said:
Hi, flashing the home-csc does not restore the phone to factory settings ( wipe data etc ) If you flash the csc, then your phone will be wiped and restored as it was out of the box. Also you dont have to change CSC, i'm on XSA and I flashed the IDU firmware.... This does not chage the CSC of the phone anyway. A lot of the Samsung firmware are multi - CSC these days.
Click to expand...
Click to collapse
So I could actually just have stayed on EUX without changing my CSC while flashing and everything would have worked fine ? Thanks, that's really good to know!