Database Info

help me please :(

i can't open may phone (samsung galaxy fit) i dont know what to do i tried this
Deodexed XXKQ2 ROM_blacklist for G-FIT after the reboot my phone is stuck in boot animation

Reboot in recovery mode and clear cache and wipe data.
Sent from my GT-S5670 using Tapatalk

i already tried that but it always stuck on boot animation, i forgot to install XXKQ2 what will i do? i cant open my samsung galaxy fit im crying now i just bought this phone from my allowance last week and now it is not openning i don't know what to help me, i just want to Deodexed XXKQ2 ROM_blacklist for G-FIT i just follow this link (http://forum.xda-developers.com/showthre...?t=1251069 ) after i do this phone is always stock in boot animation

Sounds like a soft brick to me. If you have Cwm, when the phone boots up.poured the appropriate button to get into recovery mode before the boot animation. For example, I have to press power button plus down key at the sane time upon booting up my ATRIX 4G. From there you can flash act room possible and solve the soft boot problem.
Bear in mind that these methods are for my phone. You have to do done research to see how it works on your device. Don't worry though....soft bricks are "curable".
Sent from my MB860 using XDA App

i already get into recovery mode the menus there are
reboot system now
apply update form sdcard
wipe/data factory reset
wipe cache partition
test redbend fota[FS]
i already tried all the menu but nothing happen my phone is still stuck up in booting animation my phone unit is samsung galaxy fit help me thanks

philipxtian18 said:
i already get into recovery mode the menus there are
reboot system now
apply update form sdcard
wipe/data factory reset
wipe cache partition
test redbend fota[FS]
i already tried all the menu but nothing happen my phone is still stuck up in booting animation my phone unit is samsung galaxy fit help me thanks
Click to expand...
Click to collapse
reboot in recovery mode and wipe data and cache.
If that doesn't work flash a new firmware or stock rom using odin

philipxtian18 said:
i can't open may phone (samsung galaxy fit) i dont know what to do i tried this
Deodexed XXKQ2 ROM_blacklist for G-FIT after the reboot my phone is stuck in boot animation
Click to expand...
Click to collapse
try a factory reset from recovery or else flash a new firmware... prob will be solved

thanks guys reboot in recovery mode and wipe data and cache this doesn't work.
how can i flash a new firmware or stock rom using odin, i hope that after i do this my phone will start working thanks guys i appreciate your help

try to help
philipxtian18 said:
thanks guys reboot in recovery mode and wipe data and cache this doesn't work.
how can i flash a new firmware or stock rom using odin, i hope that after i do this my phone will start working thanks guys i appreciate your help
Click to expand...
Click to collapse
try this step.
Turn off your Samsung Galaxy Fit
Remove your SIM Card and SD Card, just to avoid any issues
Extract the previously downloaded firmware packaged.
Run ODIN 4.38.exe on your PC
Click the OPS button then select BENI_v1.0.ops from extracted archive and load it.
Set the Samsung Galaxy Fit into DOWNLOAD MODE (When the screen is turned on Press and Hold POWER+VOLUME DOWN+OK Button simultaneously) Then Connect the device via USB into PC.
If ODIN detected and recognized the device the COMORT mapping at the left side will change to color yellow.
If all is set and ready: Press "Start" button and wait...
It will then start to Download, the flashing process may takes around ~5 minutes.
If all goes well and successful your phone should reboot automatically
A square on the left will display a "PASS" word it means that the flashing process was successful.
Once all completed, disconnect the phone. Turn off your phone, insert back your SIM Card and SD Card again.
Turn on your phone. Then confirm the new downloaded firmware version by typing **#1234#.

thanks guys for you help my phone now is working i flash a new firmware , i am fro asia(philippines) but i use other firmware is it okay? when i type **#1234#. the screen said that connection problem or invalid MMI code.

philipxtian18 said:
thanks guys for you help my phone now is working i flash a new firmware , i am fro asia(philippines) but i use other firmware is it okay? when i type **#1234#. the screen said that connection problem or invalid MMI code.
Click to expand...
Click to collapse
sorry my mistake, this is the correct *#1234# try again...

Problems can occur if you flash a different region firmware.
I'd advice to flash ddkq5, atleast its Asian
Sent from my GT-S5670 using Tapatalk

the firmware that i use was
Europe:
S5670XXKPG
i don't see any problem thanks guys for the big help

[Q] Odin doesnt detect the phone

actually i formatted all the things in recovery mode (/cache, /datadata, /data, /mmc, /sd, /system), from that time my phone was not booting and stuck at the samsung gt i9003 screen. I plugged my phone in download mode but Odin doesnt detect it but my PC is detecting it so i guess there is no cable problem. can anyone guide me what to do now, i am stuck??

and one more thing, my phone was rooted and was currently running on official 2.3.5 XWKPG fw! plz help me

tariq_devil said:
actually i formatted all the things in recovery mode (/cache, /datadata, /data, /mmc, /sd, /system), from that time my phone was not booting and stuck at the samsung gt i9003 screen. I plugged my phone in download mode but Odin doesnt detect it but my PC is detecting it so i guess there is no cable problem. can anyone guide me what to do now, i am stuck??
Click to expand...
Click to collapse
simply fresh install kies. Your phone doesnt detect due to absance of samsung drivers on pc.

Try to reinstal samsung drivers.
here is the link:http://www.multiupload.com/8HKDSV58VY

Yeah it worked but now its giving error in recovery mode when the cache. The error comes when it applies the multi-csc. Show ls like this cant access '\system\.....'
Sent from my GT-I9003 using Tapatalk

you're skipping steps in your complaint. you can't go from odin not recognizing your phone to having csc difficulty in recovery, right?
what fw and rom are you using?
and, after flashing kpe, the csc is applied from the csc file. since kpq, etc., don't have a csc file, the csc can't be accessed...

Sorry for the briefness in my complaint. Actually i flashed the xxkpq after the drivers got installed and my phone was detected by odin. But after the flashing the phone got stuck in loop at samsung boot screen so i decided to clear the cache in recovery mode. When i wiped the cache, it gave error as cant access multi csc. Can anyone suggest me the solyion for this problem?
Sent from my GT-I9003 using Tapatalk

tariq_devil said:
Sorry for the briefness in my complaint. Actually i flashed the xxkpq after the drivers got installed and my phone was detected by odin. But after the flashing the phone got stuck in loop at samsung boot screen so i decided to clear the cache in recovery mode. When i wiped the cache, it gave error as cant access multi csc. Can anyone suggest me the solyion for this problem?
Sent from my GT-I9003 using Tapatalk
Click to expand...
Click to collapse
Before xxkpq which was your firmware
Sent from my GT-I9003

tariq_devil said:
Sorry for the briefness in my complaint. Actually i flashed the xxkpq after the drivers got installed and my phone was detected by odin. But after the flashing the phone got stuck in loop at samsung boot screen so i decided to clear the cache in recovery mode. When i wiped the cache, it gave error as cant access multi csc. Can anyone suggest me the solyion for this problem?
Sent from my GT-I9003 using Tapatalk
Click to expand...
Click to collapse
Same thing happened for me also,then i went to download mode,flashed with uc kernel v06,and i had my phone working.try it

tariq_devil said:
and one more thing, my phone was rooted and was currently running on official 2.3.5 XWKPG fw! plz help me
Click to expand...
Click to collapse
Just flash the stock ROM for your phone ....download the official firmware and use Odin to flash it

Data wipe failed

Hi guys ,
I have a samsung galaxy tab 7 .0 (wifi only ) GT - P3113
I tried to instal a rom via Odin3 v1,85 and i now have an error message that reads :
CWM-based recovery v5.5.0.4
Formatting / data ...
E:format_volume : make_extf4fs failed on /dev/block/mmcblk0p10
Formatting /chache...
Data wipe failed.
back menu disabled.
back menu button enabled.
Click to expand...
Click to collapse
Im stuck in the recovery screen and cant reboot or select any options
Anyone tell me what to do please ? :silly:
EDIT :
Ok it finally booted up and i now have a screen that says :
ENCYPTION FAILED
unable to complete encryption due to interruption . Perform factory data reset (erasing all your data) before use .After resetting ,try encrypting device again.
Click to expand...
Click to collapse
So i reset my device and i end back at the recovery screen but with no options that work ( see first quote)
Thanks.

Removed

Sean_Seany said:
Hi guys ,
I have a samsung galaxy tab 7 .0 (wifi only ) GT - P3113
I tried to instal a rom via Odin3 v1,85 and i now have an error message that reads :
Im stuck in the recovery screen and cant reboot or select any options
Anyone tell me what to do please ? :silly:
Click to expand...
Click to collapse
Are you sure you have the correct recovery for your model installed?
Sent from my GT-P5113 using XDA Premium HD app

Yeah pretty sure , i have flashed a few ROMS on the device and have had no problems so far.....well, until now that is.

Sean_Seany said:
Yeah pretty sure , i have flashed a few ROMS on the device and have had no problems so far.....well, until now that is.
Click to expand...
Click to collapse
If you can't select any options your only choice is to try to force reset. Hold down the power button for forever, if that doesn't work I can't tell you. If you can reboot into download mode you can use odin to flash a stock firmware.
Sent from my XT860 using xda premium

[Q] CWM 6.0.1.2 Noob questions. Help!!!

Ok guys so I just popped my root cherry less than 24hrs ago, and have downloaded, installed, and flashed CWD 6.0.1.2 Touch. Im still running the stock rom for now, because I cant get Rom manager to behave properly. I have also paid for the premium version, thinking it would help. This is the walkthrough I used - http://forum.xda-developers.com/showthread.php?t=1875914
Edit: Also, under EZ unlock bootloader status is unknown. I read that its ok and is still unlocked. EZ unlock did ask for SU permissions so I know Im rooted. I dont know if this would make a difference. Should I, would it hurt anything to, uninstall and reinstall?
My problems:
1. When I attempt to download a rom through CWM, I get a message saying I need to upgrade ROM manager, and takes me to the play store. Whats that about. Im new to this, and I would rather do flashing that way then all the other more complicated ways. Suggestions?
2. When I first flashed it and did a back up to ext-sd everything worked as said in the walkthroughs. But now if I Reboot into recovery through CWM it doesn't act the same way as it did the first time. It brings up a much smaller menu, with yellow writing below saying manual mode. And another time I tried after flashing touch it worked once but hasnt yet again. Then if i do it manually: Power down> volume up, power, home it just boots the phone up. No recovery mode. Suggestions?
I have done hours of research through google and xda and cant seem to find any similar problems. I am aware that it could very well be a mistake by me, but I am at a loss now. Any help would be greatly appreciated. Im really wanting to get into this world but I know I have to take it slow for now.

The right combo is vol up+vol down+home button+power button. See if this helps
Sent from my GT-S7500 using xda app-developers app

Chre77 said:
The right combo is vol up+vol down+home button+power button. See if this helps
Sent from my GT-S7500 using xda app-developers app
Click to expand...
Click to collapse
NOPE!

Um ok. Then i don't know the problem
Sent from my GT-S7500 using xda app-developers app

Chre77 said:
Um ok. Then i don't know the problem
Sent from my GT-S7500 using xda app-developers app
Click to expand...
Click to collapse
Thanks for the suggestion.

Manual recovery is volume up/power/home all at he same time and hold till you see Samsung splash screen. Don't know about rom manager/CWM. Haven't used since Tbolt. Too wonky for me. I use and prefer TWRP. No issues ever.

prdog1 said:
Manual recovery is volume up/power/home all at he same time and hold till you see Samsung splash screen. Don't know about rom manager/CWM. Haven't used since Tbolt. Too wonky for me. I use and prefer TWRP. No issues ever.
Click to expand...
Click to collapse
I started ANDROID recovery mode that time, not CWM.
This is what shows!
Reboot system now
apply update from external storage
wipe data/factory reset
wipe cache partition apply update from cache
__________________________________
YELLOW TEXT
# MANUAL MODE #
--Applying Multi-CSC...
Applied the CSC-code : VZW
Succesfully applied multi-CSC

travis.bridges10 said:
I started ANDROID recovery mode that time, not CWM.
This is what shows!
Reboot system now
apply update from external storage
wipe data/factory reset
wipe cache partition apply update from cache
__________________________________
YELLOW TEXT
# MANUAL MODE #
--Applying Multi-CSC...
Applied the CSC-code : VZW
Succesfully applied multi-CSC
Click to expand...
Click to collapse
Then you don't have CWM you can only have 1 recovery at a time installed. I would use ez recovery and install CWM.
Sent from my S3 running Eclipse 2.1
---------- Post added at 07:52 PM ---------- Previous post was at 07:50 PM ----------
http://forum.xda-developers.com/showthread.php?p=32346811
Thus may be your problem. Do me a favor and check the last post and see if you have the mentioned file.
Sent from my S3 running Eclipse 2.1

Stuck in boot logo and cant enter recovery

So i installed monster rom but because play store and phone werent working i tried to flash back to the stock rom.
Odin said passed but my phone stucked at samsung logo.
Also my phone wont enter recovery mode cwm or stock.
i have tried to flash other rom.
i have tried to flash the rom via Kies.
during flashing ther is not any problem but it always stucks on samsung logo
i really dont know what to do.
any help?
Thank you.

Alexbool said:
So i installed monster rom but because play store and phone werent working i tried to flash back to the stock rom.
Odin said passed but my phone stucked at samsung logo.
Also my phone wont enter recovery mode cwm or stock.
i have tried to flash other rom.
i have tried to flash the rom via Kies.
during flashing ther is not any problem but it always stucks on samsung logo
i really dont know what to do.
any help?
Thank you.
Click to expand...
Click to collapse
1) Pull Out Battery.
2) Enter Recovery Mode
3) Wipe Data
4) Wipe Cache
5) Advanced>>Wipe Dalvic Cache
6) Reboot System
7) Enjoy.
8 ) Press Thanks
Sent from my GT-I8262 using XDA Premium 4 mobile app

Help
thecoreguy said:
1) Pull Out Battery.
2) Enter Recovery Mode
3) Wipe Data
4) Wipe Cache
5) Advanced>>Wipe Dalvic Cache
6) Reboot System
7) Enjoy.
8 ) Press Thanks
Sent from my GT-I8262 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I tried to install rom,. It showed installation aborted.
So i clicked the reboot, and it showed, no reebot device something.
and now it is stuck in SAMSUNG GALAXY CORE GT-I8262
This is my newww mobile
Everythig back now
Removed battery.
Recovery mod.
Restore.
Done. Thank god

Nandhusiddha said:
I tried to install rom,. It showed installation aborted.
So i clicked the reboot, and it showed, no reebot device something.
and now it is stuck in SAMSUNG GALAXY CORE GT-I8262
This is my newww mobile
Everythig back now
Removed battery.
Recovery mod.
Restore.
Done. Thank god
Click to expand...
Click to collapse
))
Sent from my GT-I9500 using XDA Premium 4 mobile app