actually i formatted all the things in recovery mode (/cache, /datadata, /data, /mmc, /sd, /system), from that time my phone was not booting and stuck at the samsung gt i9003 screen. I plugged my phone in download mode but Odin doesnt detect it but my PC is detecting it so i guess there is no cable problem. can anyone guide me what to do now, i am stuck??
and one more thing, my phone was rooted and was currently running on official 2.3.5 XWKPG fw! plz help me
tariq_devil said:
actually i formatted all the things in recovery mode (/cache, /datadata, /data, /mmc, /sd, /system), from that time my phone was not booting and stuck at the samsung gt i9003 screen. I plugged my phone in download mode but Odin doesnt detect it but my PC is detecting it so i guess there is no cable problem. can anyone guide me what to do now, i am stuck??
Click to expand...
Click to collapse
simply fresh install kies. Your phone doesnt detect due to absance of samsung drivers on pc.
Try to reinstal samsung drivers.
here is the link:http://www.multiupload.com/8HKDSV58VY
Yeah it worked but now its giving error in recovery mode when the cache. The error comes when it applies the multi-csc. Show ls like this cant access '\system\.....'
Sent from my GT-I9003 using Tapatalk
you're skipping steps in your complaint. you can't go from odin not recognizing your phone to having csc difficulty in recovery, right?
what fw and rom are you using?
and, after flashing kpe, the csc is applied from the csc file. since kpq, etc., don't have a csc file, the csc can't be accessed...
Sorry for the briefness in my complaint. Actually i flashed the xxkpq after the drivers got installed and my phone was detected by odin. But after the flashing the phone got stuck in loop at samsung boot screen so i decided to clear the cache in recovery mode. When i wiped the cache, it gave error as cant access multi csc. Can anyone suggest me the solyion for this problem?
Sent from my GT-I9003 using Tapatalk
tariq_devil said:
Sorry for the briefness in my complaint. Actually i flashed the xxkpq after the drivers got installed and my phone was detected by odin. But after the flashing the phone got stuck in loop at samsung boot screen so i decided to clear the cache in recovery mode. When i wiped the cache, it gave error as cant access multi csc. Can anyone suggest me the solyion for this problem?
Sent from my GT-I9003 using Tapatalk
Click to expand...
Click to collapse
Before xxkpq which was your firmware
Sent from my GT-I9003
tariq_devil said:
Sorry for the briefness in my complaint. Actually i flashed the xxkpq after the drivers got installed and my phone was detected by odin. But after the flashing the phone got stuck in loop at samsung boot screen so i decided to clear the cache in recovery mode. When i wiped the cache, it gave error as cant access multi csc. Can anyone suggest me the solyion for this problem?
Sent from my GT-I9003 using Tapatalk
Click to expand...
Click to collapse
Same thing happened for me also,then i went to download mode,flashed with uc kernel v06,and i had my phone working.try it
tariq_devil said:
and one more thing, my phone was rooted and was currently running on official 2.3.5 XWKPG fw! plz help me
Click to expand...
Click to collapse
Just flash the stock ROM for your phone ....download the official firmware and use Odin to flash it
Related
i can't open may phone (samsung galaxy fit) i dont know what to do i tried this
Deodexed XXKQ2 ROM_blacklist for G-FIT after the reboot my phone is stuck in boot animation
Reboot in recovery mode and clear cache and wipe data.
Sent from my GT-S5670 using Tapatalk
i already tried that but it always stuck on boot animation, i forgot to install XXKQ2 what will i do? i cant open my samsung galaxy fit im crying now i just bought this phone from my allowance last week and now it is not openning i don't know what to help me, i just want to Deodexed XXKQ2 ROM_blacklist for G-FIT i just follow this link (http://forum.xda-developers.com/showthre...?t=1251069 ) after i do this phone is always stock in boot animation
Sounds like a soft brick to me. If you have Cwm, when the phone boots up.poured the appropriate button to get into recovery mode before the boot animation. For example, I have to press power button plus down key at the sane time upon booting up my ATRIX 4G. From there you can flash act room possible and solve the soft boot problem.
Bear in mind that these methods are for my phone. You have to do done research to see how it works on your device. Don't worry though....soft bricks are "curable".
Sent from my MB860 using XDA App
i already get into recovery mode the menus there are
reboot system now
apply update form sdcard
wipe/data factory reset
wipe cache partition
test redbend fota[FS]
i already tried all the menu but nothing happen my phone is still stuck up in booting animation my phone unit is samsung galaxy fit help me thanks
philipxtian18 said:
i already get into recovery mode the menus there are
reboot system now
apply update form sdcard
wipe/data factory reset
wipe cache partition
test redbend fota[FS]
i already tried all the menu but nothing happen my phone is still stuck up in booting animation my phone unit is samsung galaxy fit help me thanks
Click to expand...
Click to collapse
reboot in recovery mode and wipe data and cache.
If that doesn't work flash a new firmware or stock rom using odin
philipxtian18 said:
i can't open may phone (samsung galaxy fit) i dont know what to do i tried this
Deodexed XXKQ2 ROM_blacklist for G-FIT after the reboot my phone is stuck in boot animation
Click to expand...
Click to collapse
try a factory reset from recovery or else flash a new firmware... prob will be solved
thanks guys reboot in recovery mode and wipe data and cache this doesn't work.
how can i flash a new firmware or stock rom using odin, i hope that after i do this my phone will start working thanks guys i appreciate your help
try to help
philipxtian18 said:
thanks guys reboot in recovery mode and wipe data and cache this doesn't work.
how can i flash a new firmware or stock rom using odin, i hope that after i do this my phone will start working thanks guys i appreciate your help
Click to expand...
Click to collapse
try this step.
Turn off your Samsung Galaxy Fit
Remove your SIM Card and SD Card, just to avoid any issues
Extract the previously downloaded firmware packaged.
Run ODIN 4.38.exe on your PC
Click the OPS button then select BENI_v1.0.ops from extracted archive and load it.
Set the Samsung Galaxy Fit into DOWNLOAD MODE (When the screen is turned on Press and Hold POWER+VOLUME DOWN+OK Button simultaneously) Then Connect the device via USB into PC.
If ODIN detected and recognized the device the COMORT mapping at the left side will change to color yellow.
If all is set and ready: Press "Start" button and wait...
It will then start to Download, the flashing process may takes around ~5 minutes.
If all goes well and successful your phone should reboot automatically
A square on the left will display a "PASS" word it means that the flashing process was successful.
Once all completed, disconnect the phone. Turn off your phone, insert back your SIM Card and SD Card again.
Turn on your phone. Then confirm the new downloaded firmware version by typing **#1234#.
thanks guys for you help my phone now is working i flash a new firmware , i am fro asia(philippines) but i use other firmware is it okay? when i type **#1234#. the screen said that connection problem or invalid MMI code.
philipxtian18 said:
thanks guys for you help my phone now is working i flash a new firmware , i am fro asia(philippines) but i use other firmware is it okay? when i type **#1234#. the screen said that connection problem or invalid MMI code.
Click to expand...
Click to collapse
sorry my mistake, this is the correct *#1234# try again...
Problems can occur if you flash a different region firmware.
I'd advice to flash ddkq5, atleast its Asian
Sent from my GT-S5670 using Tapatalk
the firmware that i use was
Europe:
S5670XXKPG
i don't see any problem thanks guys for the big help
Hi, sorry for my bad english. Im from Vietnam, and im having a p6200
last night i tried to flash an the galaxy hd, the modified stock rom, through cwm, and i forgot to put it on external sdcard, i put it on the internal sdcard, and it failed to flash when system is erased. I've lost all my backup, because it was on the internal sdcard, but i still have the cwm recovery at that time.
Then, i tried to flash the 4.0.4 stock firmware through Odin. Flashing was ok, Odin show PASS!, but my tab is stuck on the SAMSUNG logo forever. This time looks like i've lost my root and cwm. I cannot access CWM nor stock recovery.
Then, i tried to flash back the stock 3.2, flashing still ok, but my tab got bootloop on the Samsung galaxy tab screen. I've tried the Vietnam fw and the UK fw both. When flashing is done and it's about to reset, ive seen just in a flash that there were 1 or 2 red line say that cannot access data/recovery... something.
I tried the emergency recovery in KIES. Never worked.
Now im out of option. I got bootloop on stock 3.2, stuck on 4.0.4, and i cannot access the recovery. Even when i try to flash recovery through Heimdall, it wont work. I can only access the download mode. By the way, the phone is neither stuck or bootloop, but it still charging through AC very good.
Did i hard brick my tab? Do i have to send it to warranty? Is my warrant now void? What options left do i have?
Panicing
Any one? Just tell me how can i get the recovery mode back
lpvlinh07 said:
Any one? Just tell me how can i get the recovery mode back
Click to expand...
Click to collapse
Same Here 100%
Please we need help
You are not alone.I was running 4.0.4 on my p6200 and was experimenting with the permanent CWM recovery and the temporary touch one.One thing led to another and my tablet was stuck at the samsung bootanimation.After a couple of reboots it was stuck at the galaxy tab plus logo.Finally it wouldn't boot anymore and my tab is literally dead.It doesn't respond to USB connection although it gets warm when plugged into an AC socket.I've been reading about the solutions extensively. There seems to be two : 1. Get it exchanged under warranty or 2. Get it Jtag-ed if you are out of warranty.
farazlodhi007 said:
You are not alone.I was running 4.0.4 on my p6200 and was experimenting with the permanent CWM recovery and the temporary touch one.One thing led to another and my tablet was stuck at the samsung bootanimation.After a couple of reboots it was stuck at the galaxy tab plus logo.Finally it wouldn't boot anymore and my tab is literally dead.It doesn't respond to USB connection although it gets warm when plugged into an AC socket.I've been reading about the solutions extensively. There seems to be two : 1. Get it exchanged under warranty or 2. Get it Jtag-ed if you are out of warranty.
Click to expand...
Click to collapse
Just got the CWM work on it.
But getting error each time i try to install .zip roms
Problem also that i don't have CWM backup file.
Do you think if i got my friend Tab (Same model exactly) and done a CWM backup on it and ther restore to my Tab will work?
als500 said:
Just got the CWM work on it.
But getting error each time i try to install .zip roms
Problem also that i don't have CWM backup file.
Do you think if i got my friend Tab (Same model exactly) and done a CWM backup on it and ther restore to my Tab will work?
Click to expand...
Click to collapse
that would work, unless you have a hard brick. of course, you should try it, and see if you can recover from the bootloops.
Hey guys it seems i have found a solution. Just find a stock heimdall package rom and flash with heimdall. Somehow heimdall seem to be able to do what odin couldnt. Now my tab is running stock ics smoothly. Just use heimdall to flash. I hope this gonna help someone who in the situation like i was.
Sent from my MT11i using xda app-developers app
i'm glad to hear that, i have same problem know, bootloop , stuck on samsung logo, after flashing cm9 , and do the wipe from stock android recovery
halim8051 said:
i'm glad to hear that, i have same problem know, bootloop , stuck on samsung logo, after flashing cm9 , and do the wipe from stock android recovery
Click to expand...
Click to collapse
Halim,
try this, hope can help u,
1) reflash using odin 1.85.
2) Check repartion and select .pit
3) Get .pit in this link.
For save. Flash hc and wipe data (Your data will lost). Hope u already backup.
http://forum.xda-developers.com/showthread.php?p=31915442
for others, don't ever wipe on any temporary recovery mode (Touch version) or ics stock recovery. Only use for flash root.zip and flash permanent recovery(cwr6.0.1.0).
Sent from my GT-P6200
My 7.0 tablet (GT-P3113) rooted at CM10.2 turned off one day and booted in recovery. I tried system reboot but it went back into recovery. Wipe of Davilk Cache and Data caused a recovery reboot. I did a system wipe and a cache wipe and reinstalled CM10.2. I got to the boot animation and "Android Upgrading Apps"... but then I got a black screen and it rebooted and got stuck at the Samsung Galaxy Tab logo and recovery stopped working. Nand Full Wipe and a reparation with the P3110 pit file fails but flashing stock firmware from SamMobile passes but it's still stuck at the logo. I tried Heimdall but I get a "Claiming Interface Failed!" error. Please, I need help! :crying:
Use odin and flash rom and kernel
rod555 said:
Use odin and flash rom and kernel
Click to expand...
Click to collapse
I tried flashing stock from SamMobile (August 2012) and it said "PASS" but it was still stuck. I thought about the kernel but I couldn't find odin flashable kernel or a odin flashable bootloader (I had flashed a p3110 JB Bootloader from http://forum.xda-developers.com/showthread.php?t=2052290). Plus all the download links / mirrors at http://forum.xda-developers.com/showthread.php?t=1645295 are dead. Doing more research...
I just downloaded and flashed P3113UEBLG2_P3113XARBLG2_XAR from SamMobile and P3113UEBLG2-kernel.tar.md5 that I found and no luck. It still hangs on Samsung Galaxy Tab 2 7.0 logo.
Bump, does anyone have any suggestions? Should I replace the internal SD Card?
I would try reflashing in odin after it passes hold the power button for ten seconds then when the screen flickers unpress the power then hold the vol up and the power at the same time. If it goes to the stock recovery do a factory reset then reboot. It worked for me when I had to flash the original odin 4.0.3 when comming from 4.1.1
Sent from my SPH-D710VMUB using Tapatalk 4
sickysticky said:
I would try reflashing in odin after it passes hold the power button for ten seconds then when the screen flickers unpress the power then hold the vol up and the power at the same time. If it goes to the stock recovery do a factory reset then reboot. It worked for me when I had to flash the original odin 4.0.3 when comming from 4.1.1
Sent from my SPH-D710VMUB using Tapatalk 4
Click to expand...
Click to collapse
I've tried this. It stays at a black screen.
Dimensions said:
My 7.0 tablet (GT-P3113) rooted at CM10.2 turned off one day and booted in recovery. I tried system reboot but it went back into recovery. Wipe of Davilk Cache and Data caused a recovery reboot. I did a system wipe and a cache wipe and reinstalled CM10.2. I got to the boot animation and "Android Upgrading Apps"... but then I got a black screen and it rebooted and got stuck at the Samsung Galaxy Tab logo and recovery stopped working. Nand Full Wipe and a reparation with the P3110 pit file fails but flashing stock firmware from SamMobile passes but it's still stuck at the logo. I tried Heimdall but I get a "Claiming Interface Failed!" error. Please, I need help! :crying:
Click to expand...
Click to collapse
reflash the rom...
here's the link : http://samsung-updates.com/device/?id=GT-P3113
each version has the link to the whole odin flashable rom and the kernel for it, just select the version ur on and flash it then the kernel hope i help
taha_elfeituri said:
reflash the rom...
here's the link : http://samsung-updates.com/device/?id=GT-P3113
each version has the link to the whole odin flashable rom and the kernel for it, just select the version ur on and flash it then the kernel hope i help
Click to expand...
Click to collapse
Thank You, but I had this piece of information already. It came to no help, I was still having the same problem. I sent it back to Samsung.
Dimensions said:
Thank You, but I had this piece of information already. It came to no help, I was still having the same problem. I sent it back to Samsung.
Click to expand...
Click to collapse
did you flash the kernel??
Hi Friends,
I already tried reading most of the threads about this problem but sadly I didn't found the answer to my problem.
i was trying to flash CW 12.1 on my Samsung GT-P3100 (rooted) via mobile odin, but unfortunately it got stuck saying blabla file missing.
then i tried to reboot the tab by pressing power button, but now it is stuck on Samsung logo.
i can go into the download mode but windows can not recognize the USB device
already tried re-install kies, samsung mobile drivers.
nothing worked yet.
can also get into recovery mode showing:
Android system recovery <3e>
Volume up/down to move highlight;
power button to select.
reboot system now
apply update from external storage
wipe data/factory reset
wipe cache partition
apply update from cache
# MANUAL MODE #
-- Appling Multi-CSC . . .
Applied the CSC-code : INU
Successfully applied multi-CSC.
i didn't took backup of it !
don't know the firmware Version.
this is the only devise i have!
Please help me out
RohitGautam said:
Hi Friends,
I already tried reading most of the threads about this problem but sadly I didn't found the answer to my problem.
i was trying to flash CW 12.1 on my Samsung GT-P3100 (rooted) via mobile odin, but unfortunately it got stuck saying blabla file missing.
then i tried to reboot the tab by pressing power button, but now it is stuck on Samsung logo.
i can go into the download mode but windows can not recognize the USB device
already tried re-install kies, samsung mobile drivers.
nothing worked yet.
can also get into recovery mode showing:
Android system recovery <3e>
Volume up/down to move highlight;
power button to select.
reboot system now
apply update from external storage
wipe data/factory reset
wipe cache partition
apply update from cache
# MANUAL MODE #
-- Appling Multi-CSC . . .
Applied the CSC-code : INU
Successfully applied multi-CSC.
i didn't took backup of it !
don't know the firmware Version.
this is the only devise i have!
Please help me out
Click to expand...
Click to collapse
You were on stock firm ware 4.1.2 before flashing?
Sent from my GT-P3100 using Tapatalk
Yes it was!
Sent from my XT1068 using Tapatalk
shsagnik said:
You were on stock firm ware 4.1.2 before flashing?
Sent from my GT-P3100 using Tapatalk
Click to expand...
Click to collapse
Thanks for your reply,
Yes it was!
Sent from my XT1068 using Tapatalk
RohitGautam said:
Yes it was!
Sent from my XT1068 using Tapatalk
Click to expand...
Click to collapse
So can you try downloading Brazilian firmware from sammobile or some other site your wish and then transfer it to your sd card and then try applying update from sd card?
RohitGautam said:
Thanks for your reply,
Yes it was!
Sent from my XT1068 using Tapatalk
Click to expand...
Click to collapse
Sent from my GT-P3100 using Tapatalk
shsagnik said:
So can you try downloading Brazilian firmware from sammobile or some other site your wish and then transfer it to your sd card and then try applying update from sd card?
Sent from my GT-P3100 using Tapatalk
Click to expand...
Click to collapse
I tried it, (downloaded from sammobiles).
it shows " install/sdcard.. "
stuck for a while, then shows fresh recovery page again!
tried indian firmware too! but same result.
what if its kernel would have flashed (don't know anything about it really )
please help me...
RohitGautam said:
I tried it, (downloaded from sammobiles).
it shows " install/sdcard.. "
stuck for a while, then shows fresh recovery page again!
tried indian firmware too! but same result.
what if its kernel would have flashed (don't know anything about it really )
please help me...
Click to expand...
Click to collapse
Try installing cwm or twrp using Odin
Disable kies by killing it from task manager to make sure it doesn't cause any trouble
Sent from my GT-P3100 using Tapatalk
Hi guys,
I have flashed SD recovery over Exynos (idiot - I know!)
Have I got any chances to recover the device?
I have got g930f.
Bootloops at Samsung Galaxy S7 logo.
Will boot to download mode, visible in odin but upon flashing anything it will immediately restart and odin will FAIL.
Anything to revive this brick?
Thanks!
bednim said:
Hi guys,
I have flashed SD recovery over Exynos (idiot - I know!)
Have I got any chances to recover the device?
I have got g930f.
Bootloops at Samsung Galaxy S7 logo.
Will boot to download mode, visible in odin but upon flashing anything it will immediately restart and odin will FAIL.
Anything to revive this brick?
Thanks!
Click to expand...
Click to collapse
Hi mate
Probably yes....
You could try to reflash the correct recovery first.....
Custom like TWRP
Check here
Or the original one
Check here
Worse case scenario flash a stock rom (odin) Use all 4 files AP, BL, CP and home_csc to try to save your data ( has to be the same as you have in your phone now) or CSC this will give you a clean installation
Check here
MAX 404 said:
Hi mate
Probably yes....
You could try to reflash the correct recovery first.....
Custom like TWRP
Check here
Or the original one
Check here
Worse case scenario flash a stock rom (odin) Use all 4 files AP, BL, CP and home_csc to try to save your data ( has to be the same as you have in your phone now) or CSC this will give you a clean installation
Check here
Click to expand...
Click to collapse
Thank you,
For whatever reason - donwload mode is somehow corrupted. As soon as I'm starting to flash anything it fails and restarts the phone...
Any other options I could possibly have?
Thanks!
bednim said:
Thank you,
For whatever reason - donwload mode is somehow corrupted. As soon as I'm starting to flash anything it fails and restarts the phone...
Any other options I could possibly have?
Thanks!
Click to expand...
Click to collapse
What error do you get in Odin, check the logs.
Did you try flashing from another PC
re install driver
Un install Kies or smart swicth
Different USB cable
What odin version are you using
MAX 404 said:
What error do you get in Odin, check the logs.
Did you try flashing from another PC
re install driver
Un install Kies or smart swicth
Different USB cable
What odin version are you using
Click to expand...
Click to collapse
Nope, I haven't tried different pc/cable as the very same pc was ok to flash wrong recovery 5min earlier...
I don't have kies installed, I just had samsung drivers which were always working for me.
I am 100% positive its not pc fault just me being an idiot...
I am using odin 3.12
Thank you
bednim said:
Nope, I haven't tried different pc/cable as the very same pc was ok to flash wrong recovery 5min earlier...
I don't have kies installed, I just had samsung drivers which were always working for me.
I am 100% positive its not pc fault just me being an idiot...
I am using odin 3.12
Thank you
Click to expand...
Click to collapse
We are all idiots at one point or another
Just want to point out different reason why odin may fail...
See what error do you get when flashing with Odin...and what files are you using when it fails to flash
MAX 404 said:
We are all idiots at one point or another
Just want to point out different reason why odin may fail...
See what error do you get when flashing with Odin...and what files are you using when it fails to flash
Click to expand...
Click to collapse
I can't check it right now ( I'm at work) but it basically gives me fail on red backdrop. Can't remember what it says in the log, but definitely says Success: 0/ fail: 1
Last file I tried to flash was whole system rom. Just before that, I tried to flash TWRP for s7 exynos - the correct one but it failed. And, of course, it all started with flashing incorrect twrp which went through perfectly :/
Thanks
bednim said:
I can't check it right now ( I'm at work) but it basically gives me fail on red backdrop. Can't remember what it says in the log, but definitely says Success: 0/ fail: 1
Last file I tried to flash was whole system rom. Just before that, I tried to flash TWRP for s7 exynos - the correct one but it failed. And, of course, it all started with flashing incorrect twrp which went through perfectly :/
Thanks
Click to expand...
Click to collapse
When you get home, just try installing "Samsung Smart Switch" (it's no longer Kies) (http://www.samsung.com/sg/support/smartswitch/Smart_Switch_pc_setup.zip)
I understand that you already have drivers on your PC, but the Samsung Smart Switch might come with some updated drivers for your Samsung S7, which might change the scenario. Installing that, plus using another version of Odin (run it as Admin). I used this one just today. (http://dl.sammobile.com/Odin3-v3.11.1.zip)
If the flashing the recovery still fails, try flashing Stock rom under AP like suggested earlier. If that still fails.
Use Samsung Smart Switch's "Emergency recovery" but do the Initialization (2nd tab) by inputting your Phone model and let Smart Switch download the official firmware from Samsung's servers.
This must be done while your phone is in Download mode, so make sure you have enough juice to wait out the download process.
Good luck!