Database Info

help me please :(

i can't open may phone (samsung galaxy fit) i dont know what to do i tried this
Deodexed XXKQ2 ROM_blacklist for G-FIT after the reboot my phone is stuck in boot animation

Reboot in recovery mode and clear cache and wipe data.
Sent from my GT-S5670 using Tapatalk

i already tried that but it always stuck on boot animation, i forgot to install XXKQ2 what will i do? i cant open my samsung galaxy fit im crying now i just bought this phone from my allowance last week and now it is not openning i don't know what to help me, i just want to Deodexed XXKQ2 ROM_blacklist for G-FIT i just follow this link (http://forum.xda-developers.com/showthre...?t=1251069 ) after i do this phone is always stock in boot animation

Sounds like a soft brick to me. If you have Cwm, when the phone boots up.poured the appropriate button to get into recovery mode before the boot animation. For example, I have to press power button plus down key at the sane time upon booting up my ATRIX 4G. From there you can flash act room possible and solve the soft boot problem.
Bear in mind that these methods are for my phone. You have to do done research to see how it works on your device. Don't worry though....soft bricks are "curable".
Sent from my MB860 using XDA App

i already get into recovery mode the menus there are
reboot system now
apply update form sdcard
wipe/data factory reset
wipe cache partition
test redbend fota[FS]
i already tried all the menu but nothing happen my phone is still stuck up in booting animation my phone unit is samsung galaxy fit help me thanks

philipxtian18 said:
i already get into recovery mode the menus there are
reboot system now
apply update form sdcard
wipe/data factory reset
wipe cache partition
test redbend fota[FS]
i already tried all the menu but nothing happen my phone is still stuck up in booting animation my phone unit is samsung galaxy fit help me thanks
Click to expand...
Click to collapse
reboot in recovery mode and wipe data and cache.
If that doesn't work flash a new firmware or stock rom using odin

philipxtian18 said:
i can't open may phone (samsung galaxy fit) i dont know what to do i tried this
Deodexed XXKQ2 ROM_blacklist for G-FIT after the reboot my phone is stuck in boot animation
Click to expand...
Click to collapse
try a factory reset from recovery or else flash a new firmware... prob will be solved

thanks guys reboot in recovery mode and wipe data and cache this doesn't work.
how can i flash a new firmware or stock rom using odin, i hope that after i do this my phone will start working thanks guys i appreciate your help

try to help
philipxtian18 said:
thanks guys reboot in recovery mode and wipe data and cache this doesn't work.
how can i flash a new firmware or stock rom using odin, i hope that after i do this my phone will start working thanks guys i appreciate your help
Click to expand...
Click to collapse
try this step.
Turn off your Samsung Galaxy Fit
Remove your SIM Card and SD Card, just to avoid any issues
Extract the previously downloaded firmware packaged.
Run ODIN 4.38.exe on your PC
Click the OPS button then select BENI_v1.0.ops from extracted archive and load it.
Set the Samsung Galaxy Fit into DOWNLOAD MODE (When the screen is turned on Press and Hold POWER+VOLUME DOWN+OK Button simultaneously) Then Connect the device via USB into PC.
If ODIN detected and recognized the device the COMORT mapping at the left side will change to color yellow.
If all is set and ready: Press "Start" button and wait...
It will then start to Download, the flashing process may takes around ~5 minutes.
If all goes well and successful your phone should reboot automatically
A square on the left will display a "PASS" word it means that the flashing process was successful.
Once all completed, disconnect the phone. Turn off your phone, insert back your SIM Card and SD Card again.
Turn on your phone. Then confirm the new downloaded firmware version by typing **#1234#.

thanks guys for you help my phone now is working i flash a new firmware , i am fro asia(philippines) but i use other firmware is it okay? when i type **#1234#. the screen said that connection problem or invalid MMI code.

philipxtian18 said:
thanks guys for you help my phone now is working i flash a new firmware , i am fro asia(philippines) but i use other firmware is it okay? when i type **#1234#. the screen said that connection problem or invalid MMI code.
Click to expand...
Click to collapse
sorry my mistake, this is the correct *#1234# try again...

Problems can occur if you flash a different region firmware.
I'd advice to flash ddkq5, atleast its Asian
Sent from my GT-S5670 using Tapatalk

the firmware that i use was
Europe:
S5670XXKPG
i don't see any problem thanks guys for the big help

Stuck in Update boot loop Please Help!!!

I was rooted with CWM recovery. I odin flashed stock with root injected and then flashed via odin stock kernel and recovery. At this time I was able to pull the update and the device restarted to install. Upon 100% completion the device rebooted as I woudl expect but upon reboot it goes right back into the install, hits 100% and does the same thing. It appears Im stuck in a update boot loop. Has anyone else experienced this?
I did a odin restore with Stock 8013.tar with root injected but upon reboot once odin completes it goes right back into this update loop. Someone please help!!!!

ej_424 said:
I was rooted with CWM recovery. I odin flashed stock with root injected and then flashed via odin stock kernel and recovery. At this time I was able to pull the update and the device restarted to install. Upon 100% completion the device rebooted as I woudl expect but upon reboot it goes right back into the install, hits 100% and does the same thing. It appears Im stuck in a update boot loop. Has anyone else experienced this?
I did a odin restore with Stock 8013.tar with root injected but upon reboot once odin completes it goes right back into this update loop. Someone please help!!!!
Click to expand...
Click to collapse
Just flashed stock kernel and recovery via odin and same thing happens. Just after samsung logo on splash screen it goes into the android character with a percentage for an update being applied. It hits 100% and sits there for a couple minutes, reboots and does the same thing all over.
I"m desperate and need this to get fixed!!

ej_424 said:
Just flashed stock kernel and recovery via odin and same thing happens. Just after samsung logo on splash screen it goes into the android character with a percentage for an update being applied. It hits 100% and sits there for a couple minutes, reboots and does the same thing all over.
I"m desperate and need this to get fixed!!
Click to expand...
Click to collapse
I flashed the stock n8000 recovery file via odin and it booted me out of the update loop. I had to do it twice tho. I rooted via odin so our fixes may be different.
I used file posted here http://forum.xda-developers.com/showthread.php?p=30450339#post30450339 post 45
Hope this helps a little

ej_424 said:
I was rooted with CWM recovery. I odin flashed stock with root injected and then flashed via odin stock kernel and recovery. At this time I was able to pull the update and the device restarted to install. Upon 100% completion the device rebooted as I woudl expect but upon reboot it goes right back into the install, hits 100% and does the same thing. It appears Im stuck in a update boot loop. Has anyone else experienced this?
I did a odin restore with Stock 8013.tar with root injected but upon reboot once odin completes it goes right back into this update loop. Someone please help!!!!
Click to expand...
Click to collapse
ej_424 said:
Just flashed stock kernel and recovery via odin and same thing happens. Just after samsung logo on splash screen it goes into the android character with a percentage for an update being applied. It hits 100% and sits there for a couple minutes, reboots and does the same thing all over.
I"m desperate and need this to get fixed!!
Click to expand...
Click to collapse
Ok I'm backup and running. I had to flash "HighonAndroidCWMRecovery" via odin to get past the update loop. Any ideas why this woudl be? I'm running stock with root and custom recovery. If I flash stock recvoery again and attempt the update do you think the same thing will occur?

ej_424 said:
Ok I'm backup and running. I had to flash "HighonAndroidCWMRecovery" via odin to get past the update loop. Any ideas why this woudl be? I'm running stock with root and custom recovery. If I flash stock recvoery again and attempt the update do you think the same thing will occur?
Click to expand...
Click to collapse
This need not be so complicated follow directions here http://forum.xda-developers.com/showthread.php?t=1847054&page=6 see post 58 and 39

Stuck, can't restore factory settings
I tried to unroot my Galaxy note 10.1 wi-fi and have caused such damage that it won't boot up. I have tried to press the power and down volume and I either get the Black welcome screen stuck, requesting I download the md5 file (which I have tried and doesn't work) or asks to use Kies to boot, but my laptops won't even pick up the device, they recognizes that there is a new device connected but it can't read it!
In the top left hand corner it reads
ODIN MODE (in red letters)
Product name: GT-N8010
Customer binary: yes (20 counts)
Current Binary: Custom
System status: Custom
PLEASE HELP!!!!
Thanks in advance

bee_rob said:
I tried to unroot my Galaxy note 10.1 wi-fi and have caused such damage that it won't boot up. I have tried to press the power and down volume and I either get the Black welcome screen stuck, requesting I download the md5 file (which I have tried and doesn't work) or asks to use Kies to boot, but my laptops won't even pick up the device, they recognizes that there is a new device connected but it can't read it!
In the top left hand corner it reads
ODIN MODE (in red letters)
Product name: GT-N8010
Customer binary: yes (20 counts)
Current Binary: Custom
System status: Custom
PLEASE HELP!!!!
Thanks in advance
Click to expand...
Click to collapse
I have same Problem

My only response would be to go to sammobile and download as close to shipped rom as you can (must be for your region and carrier, if from carrier), updated rom is fine. Make sure the download ISN'T corrupted by doing an MD5 check.. Also before f;lashing, make sure you exit KIES as this can screw up the connection in ODIN.
Put in Download mode, hold down volume and power until it says a scary warning, ignore the warning and press up volume.
Flash with ODIN making sure re-partition ISN'T ticked, when it finishes flashing turn off power.
Go to recovery by holding up volume and power button until it goes into recovery.
Wipe data/cache and then wipe dalvik cache.
Reboot and see what happens.
Good luck.

ultramag69 said:
My only response would be to go to sammobile and download as close to shipped rom as you can (must be for your region and carrier, if from carrier), updated rom is fine. Make sure the download ISN'T corrupted by doing an MD5 check.. Also before f;lashing, make sure you exit KIES as this can screw up the connection in ODIN.
Put in Download mode, hold down volume and power until it says a scary warning, ignore the warning and press up volume.
Flash with ODIN making sure re-partition ISN'T ticked, when it finishes flashing turn off power.
Go to recovery by holding up volume and power button until it goes into recovery.
Wipe data/cache and then wipe dalvik cache.
Reboot and see what happens.
Good luck.
Click to expand...
Click to collapse
Not working, not go the Recovery Mode, Only Samsung Logo.

I'm having similar issue as Odin keeps failing when trying to flash ROM.
Does anyone know the commands to do it through ADB? I've done it before on my nexus7 but don't know the commands to exactly use for the note. I still can't get into recovery. Only can get into that ODIN mode. I have all drivers and Android ADB installed on PC.
It seems like nothing will write to the NAND. Although my flash count changes now showing my attempts. I might have no choice but to call Samsung and file a warranty claim. I just don't want to lose all the pictures and info that's in my tablet.

Well I got my tablet back yesterday from Samsung. They fixed it. The report showed they replaced some piece that burned out. I forgot the name of it. Unfortunately all my info and stuff was erased. So I had to reinstall everything manually. At least my tablet working like new again. So glad to have it back. Been like a month or so since I've been able to use it. My nexus 7 and galaxy s3 was holding me down in the meanwhile.
This note is a great device. IM seeing again why I've missed it so much. Works flawlessly on stock Tom.

Recovery was deleted during flash?

So I was trying to get HyperDrive running on my phone and had flashed it a few times. I was using TWRP to flash and accidently picked Format for the wipe. Then I flashed Liquid Rom. Realizing it was more of an AOSP rom I tried flashing Hyperdrive again. Again being stupid hit the Format wipe. Then when I tried flashing the rom it flashed but when it rebooting the splash/loadscreen for the rom just continuously played. Also I can no longer access TWRP. I tried using ODIN to put a stock rom on again, but I meet the same problem of the continuously loading screen.
Help Please? I'm slowly losing it...

Take the battery out then replace it then hit the power button and home button and volume up and try to get to recovery
Sent from my SCH-I535 using Tapatalk 2

did it and it goes to the samsung with the unlocked lock and says on the top "booting recovery" then goes black vibrates and then reboots

Okay I finally got it working. Not sure what caused it but it seems flashing a ODIN package that supported recovery worked its magic. From there I was able to access the stock recovery and then Flashed an ODIN package containing a stock rooted rom.

[Q] HELP galaxy tab 2 7.0 p3113 stuck at samsung logo screen

i was trying to reset to stock rom using odin 1.85 and firmware from the sammobile website , from what i have, which is cm-10-20121106-NIGHTLY-p3113
after that the device reboot and stuck at samsung logo screen
i try to boot into download mode but i doesn't work and i try to connect to my PC and my PC will do nothing and shows nothing so i cant re do it
what should i do now?

Are you able to reboot into recovery? If so, you can try flashing another rom, CM 10.2 Nightlies for the P3110 work without issues on P3113, seeing as your nightly build is from 2012...

ok i can boot into download mode now, but cannot boot into recovery mode, and i try to restore to stock firmware using the md5 from sammobile.com but afterward it still stuck at samsung logo screen help!

you need to do a factory reset in recovery. try to boot into recovery directly from download mode
---------- Post added at 09:44 AM ---------- Previous post was at 09:42 AM ----------
maybe try flashing a customrecovery e.g. CWM with Odin

Factory reset from recovery?
First off, thank you since i am having the exact same problem (same cm nightly, no access to recovery, etc.). So, once i flash CWM via odin and factory reset, it should be all good?
I'll let you know if it works
UPDATE: As soon as i enter CWM, it loads with the android with the spinning cube in its chest in the background. It then asks to install UNTRUSTED.zip. What needs to be done?
UPDATE 2: I rebooted into recovery again and it worked. Factory reset and cache wipe did the trick. Again, thank you Android-Andi. Toshiwan, i hope you get your issue resolved

but i cant boot into recovery mode, only download mode, and if i try to turn off the tablet from the samsung logo screen, it will just restart and stuck at logo screen again. so i have to wait till the battery dies and wait another half hour to charge battery and then get to download mode, it's very hard for me help

didmyou flash CWM?
Toshiwan said:
but i cant boot into recovery mode, only download mode, and if i try to turn off the tablet from the samsung logo screen, it will just restart and stuck at logo screen again. so i have to wait till the battery dies and wait another half hour to charge battery and then get to download mode, it's very hard for me help
Click to expand...
Click to collapse
Did you flash the CWM recovery? Try version 6.0.45. Then, it may not load the first time so reboot till it does. Then, wipe data, wipe cache, wipe dalvik

[Q] Help!!! Flashed the wrong rom on my tablet

(new member)
I was flashing rom for sm t310 instead of smt311.The error came up when i flashed the rom.After i rebooted my devie its stuck on the logo screen.I tried wipe data and factory reset but nothing helped.
I tried to restore but it failed
But i can still go to recovery and download mode.Whenever i reboot or switch off my tablet it asks if i want to root.Is there any solution to fix my tablet?Thanks!

Luin081 said:
(new member)
I was flashing rom for sm t310 instead of smt311.The error came up when i flashed the rom.After i rebooted my devie its stuck on the logo screen.I tried wipe data and factory reset but nothing helped.
I tried to restore but it failed
But i can still go to recovery and download mode.Whenever i reboot or switch off my tablet it asks if i want to root.Is there any solution to fix my tablet?Thanks!
Click to expand...
Click to collapse
flash rom for your device, its simply

Paget96 said:
flash rom for your device, its simply
Click to expand...
Click to collapse
should i flash my current rom? and is therany way my tablet can be fixed?Thanks

Luin081 said:
should i flash my current rom? and is therany way my tablet can be fixed?Thanks
Click to expand...
Click to collapse
no, only if you backup rom with recovery...

Paget96 said:
no, only if you backup rom with recovery...
Click to expand...
Click to collapse
how should i flash my rom?

Luin081 said:
how should i flash my rom?
Click to expand...
Click to collapse
http://www.sammobile.com/firmwares/3/?download=31090
sign up here, this is an official samsung page for firmwares,etc.
when download ROM follow this:
Instructions
Extract (unzip) the firmware file
Download Odin v3.09
Extract Odin zip-file
Open Odin v3.09
Reboot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait a few minutes

Thanks!!
Hope this will work

everytime i switch off/reboot my device through twrp it says that your device does not appear to be rooted,install super su now?
if i press install it will just reboot back to the logo screen.
Is there anything i should do?

Thank you very much!!
Now my tablet is back to normal again.
Many thanks!!