[Q] Help!!! Flashed the wrong rom on my tablet - General Questions and Answers

(new member)
I was flashing rom for sm t310 instead of smt311.The error came up when i flashed the rom.After i rebooted my devie its stuck on the logo screen.I tried wipe data and factory reset but nothing helped.
I tried to restore but it failed
But i can still go to recovery and download mode.Whenever i reboot or switch off my tablet it asks if i want to root.Is there any solution to fix my tablet?Thanks!

Luin081 said:
(new member)
I was flashing rom for sm t310 instead of smt311.The error came up when i flashed the rom.After i rebooted my devie its stuck on the logo screen.I tried wipe data and factory reset but nothing helped.
I tried to restore but it failed
But i can still go to recovery and download mode.Whenever i reboot or switch off my tablet it asks if i want to root.Is there any solution to fix my tablet?Thanks!
Click to expand...
Click to collapse
flash rom for your device, its simply

Paget96 said:
flash rom for your device, its simply
Click to expand...
Click to collapse
should i flash my current rom? and is therany way my tablet can be fixed?Thanks

Luin081 said:
should i flash my current rom? and is therany way my tablet can be fixed?Thanks
Click to expand...
Click to collapse
no, only if you backup rom with recovery...

Paget96 said:
no, only if you backup rom with recovery...
Click to expand...
Click to collapse
how should i flash my rom?

Luin081 said:
how should i flash my rom?
Click to expand...
Click to collapse
http://www.sammobile.com/firmwares/3/?download=31090
sign up here, this is an official samsung page for firmwares,etc.
when download ROM follow this:
Instructions
Extract (unzip) the firmware file
Download Odin v3.09
Extract Odin zip-file
Open Odin v3.09
Reboot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait a few minutes

Thanks!!
Hope this will work

everytime i switch off/reboot my device through twrp it says that your device does not appear to be rooted,install super su now?
if i press install it will just reboot back to the logo screen.
Is there anything i should do?

Thank you very much!!
Now my tablet is back to normal again.
Many thanks!!

Related

My device freezed..plz help

Plz somebody help me.i have rooted my device today. Rooting was fine and I have installed reverse thethering app. Then I have installed Titanium Backup and change some settings to freeze apps.then the phone freezed and restarted itself. but it is stuck in samsungs logo..What to do..plz somebody help
ramezabd said:
Plz somebody help me.i have rooted my device today. Rooting was fine and I have installed reverse thethering app. Then I have installed Titanium Backup and change some settings to freeze apps.then the phone freezed and restarted itself. but it is stuck in samsungs logo..What to do..plz somebody help
Click to expand...
Click to collapse
My phone is not entering in download mode. When i try to enter the screen fades and restarts. I tried to enter in recover mode and selected factory reset then a logo appearslike a hat and an orange symbol...plz someone help me plzzzz....
ramezabd said:
My phone is not entering in download mode. When i try to enter the screen fades and restarts. I tried to enter in recover mode and selected factory reset then a logo appearslike a hat and an orange symbol...plz someone help me plzzzz....
Click to expand...
Click to collapse
I guess you have to do this http://forum.xda-developers.com/showthread.php?t=1411768
Then flash stock ROM again [KPE], hope this can help.
first unplug your battery,and then press home and volum first and then power,untill go to download mode:angel:
malungkot said:
I guess you have to do this http://forum.xda-developers.com/showthread.php?t=1411768
Then flash stock ROM again [KPE], hope this can help.
Click to expand...
Click to collapse
My phone was in Froyo 2.2, then I updated via kies to 2.3.6. So which stock I have to reflash. I sthis bricking..? I have successfully rooted my phone. I think The problem happened because of titanium backup.
MR.Volkf said:
first unplug your battery,and then press home and volum first and then power,untill go to download mode:angel:
Click to expand...
Click to collapse
Normally the device is not entering in download/recovery mode.
update. Its now entered to dwload mode.Now what I have to do..? My phone was in froyo 2.2 and I have updated it to 2.3.6 via kies
ramezabd said:
Normally the device is not entering in download/recovery mode.
update. Its now entered to dwload mode.Now what I have to do..? My phone was in froyo 2.2 and I have updated it to 2.3.6 via kies
Click to expand...
Click to collapse
great!!! since you can enter download mode I am gonna say you the easiest way to get your phone back in running condition..
*Download ODIN (google for the download link or search here in forums)
*Download a stock firmware from samfirmware (www.sammobile.com/firmwares/) or from here http://forum.xda-developers.com/showthread.php?t=1004647 and extract the downloaded file to .tar.md5
*Install samsung USB drivers.
*Get your phone into Download mode and connect it to PC via usb cable.
*Open ODIN and check if the com port section and turned yellow(this means your phone is recognised by ODIN).
*Once the port section is yellow open the PDA section in ODIN and point the downloaded stock firmware in it.(the firmware file should be of format "I9003DDLF2_I9003ODDLF2_I9003DDLE1_HOME.tar.md5").This format is just for example and it may vary depending on the stock ROM you dowloaded.
*Click the start button.
*Once finished the ODIN com port section will turn green and should report "PASS"
*Disconnect your phone and Power on.. wait for some time as its the first boot so it will take time so be patient.
mustafahussain said:
great!!! since you can enter download mode I am gonna say you the easiest way to get your phone back in running condition..
*Download ODIN (google for the download link or search here in forums)
*Download a stock firmware from samfirmware (www.sammobile.com/firmwares/) or from here http://forum.xda-developers.com/showthread.php?t=1004647 and extract the downloaded file to .tar.md5
*Install samsung USB drivers.
*Get your phone into Download mode and connect it to PC via usb cable.
*Open ODIN and check if the com port section and turned yellow(this means your phone is recognised by ODIN).
*Once the port section is yellow open the PDA section in ODIN and point the downloaded stock firmware in it.(the firmware file should be of format "I9003DDLF2_I9003ODDLF2_I9003DDLE1_HOME.tar.md5").This format is just for example and it may vary depending on the stock ROM you dowloaded.
*Click the start button.
*Once finished the ODIN com port section will turn green and should report "PASS"
*Disconnect your phone and Power on.. wait for some time as its the first boot so it will take time so be patient.
Click to expand...
Click to collapse
Yes you are awesome... It was okay last night, I followed the steps Thanks for every XDA n who replied for me...
I have one more question. I rooted again my phone,And I found these new apps, Superuser,tweak and cwm. I dnt understand for what these 2nd and third apps for..And I am not installed any custom rom,so is there any themes available for rooted stock roms..?
ramezabd said:
Yes you are awesome... It was okay last night, I followed the steps Thanks for every XDA n who replied for me...
I have one more question. I rooted again my phone,And I found these new apps, Superuser,tweak and cwm. I dnt understand for what these 2nd and third apps for..And I am not installed any custom rom,so is there any themes available for rooted stock roms..?
Click to expand...
Click to collapse
tweeks are to to edit your build.prop and CWM(ClockWorkMOD) which allows you to create a backup point which you can restore via recovery and also let you flash ROM,MOD,etc and SuperUser is the app which comes into play after rooting which give root access to your phone/apps.
@themes:since you are on stock you can download any launcher like go launcher from market and download themes from there
so, how can i install jb or ics themes on my phone, I just want theme not the whole rom. or is there any custom gingerbread rom(stable like stock rom) for installing jb themes..? :0
Hi
I have just been notified by private message
to enter download mode you must press simultaneously in the following order
Volume down > Power > Home about 5 seconds then release
You can also try to get a JIG
first step format your micoSD
make a copy of all your data on your PC
https://www.sdcard.org/downloads/formatter_3/
Odin 1.85 only
- drivers samsung.rar - 5.58 MB
- Open Odin 1.85 only !!!
- KPE FULL (do not forget the PIT) (Froyo only ! no forget bootloader)
reset odin then remove cable and battery after samsung logo
- LF2 (PDA only with Odin)
reset odin then remove cable and battery after second samsung logo
- CF Root LF2 (PDA only with Odin)
reset odin then remove cable and battery after samsung logo
- Wipe data/factory reset
do not worry if you remain alert you every chance to find your phone as you've never seen before
there are plenty of experienced members here to help you
enjoy...
ramezabd said:
so, how can i install jb or ics themes on my phone, I just want theme not the whole rom. or is there any custom gingerbread rom(stable like stock rom) for installing jb themes..? :0
Click to expand...
Click to collapse
you can download "Go launcher".. open it and browse for ics or JB themes and also there are many Gingerbread ROMs which have commom interface and JB ..
Enjoy
LoLaTiOn said:
Hi
I have just been notified by private message
to enter download mode you must press simultaneously in the following order
Volume down > Power > Home about 5 seconds then release
You can also try to get a JIG
first step format your micoSD
make a copy of all your data on your PC
https://www.sdcard.org/downloads/formatter_3/
Odin 1.85 only
- drivers samsung.rar - 5.58 MB
- Open Odin 1.85 only !!!
- KPE FULL (do not forget the PIT) (Froyo only ! no forget bootloader)
reset odin then remove cable and battery after samsung logo
- LF2 (PDA only with Odin)
reset odin then remove cable and battery after second samsung logo
- CF Root LF2 (PDA only with Odin)
reset odin then remove cable and battery after samsung logo
- Wipe data/factory reset
do not worry if you remain alert you every chance to find your phone as you've never seen before
there are plenty of experienced members here to help you
enjoy...
Click to expand...
Click to collapse
Its fine now..thanks for your word.
mustafahussain said:
you can download "Go launcher".. open it and browse for ics or JB themes and also there are many Gingerbread ROMs which have commom interface and JB ..
Enjoy
Click to expand...
Click to collapse
I have downloaded the frankenstain rom for flashing,But when I try to enter in recovery mode The screen fades and restarting normally. Is there any other settings for installing a rom..?
BTW when I opens the CWM in my menu it shows 'this version of CWM manager should be used with CF-ROOT v5.0 or newer.It appears you are running on a different kernel. Various features have been disabled.' Is that the problem with the kernel i have rooted..?
ramezabd said:
I have downloaded the frankenstain rom for flashing,But when I try to enter in recovery mode The screen fades and restarting normally. Is there any other settings for installing a rom..?
BTW when I opens the CWM in my menu it shows 'this version of CWM manager should be used with CF-ROOT v5.0 or newer.It appears you are running on a different kernel. Various features have been disabled.' Is that the problem with the kernel i have rooted..?
Click to expand...
Click to collapse
To enter recovery mode you should press Volume UP+Home Button+Power Button.press it long enough till samsung logo passes by.. and even my screen fades when I try it manually... try it for 4-5 times till you enter in recovery and dont worry when screen fades,its not an issue...
maybe your kernel is not compatible with the present version of CWM and since its not compatible some features might have been disabled and its no big deal....Custom ROM is zip and should be flashed via recovery so that you can wipe data/cache/dalvik..
mustafahussain said:
To enter recovery mode you should press Volume UP+Home Button+Power Button.press it long enough till samsung logo passes by.. and even my screen fades when I try it manually... try it for 4-5 times till you enter in recovery and dont worry when screen fades,its not an issue...
maybe your kernel is not compatible with the present version of CWM and since its not compatible some features might have been disabled and its no big deal....Custom ROM is zip and should be flashed via recovery so that you can wipe data/cache/dalvik..
Click to expand...
Click to collapse
So, I have downloaded the rom and placed it in my external sd. Then I must go to recovery mode and select install zip from sd card. thats it or any other steps to follow. The rom file must place in External sd or in device memory..? I will try this now after getting a reply.. <excited>
ramezabd said:
So, I have downloaded the rom and placed it in my external sd. Then I must go to recovery mode and select install zip from sd card. thats it or any other steps to follow. The rom file must place in External sd or in device memory..? I will try this now after getting a reply.. <excited>
Click to expand...
Click to collapse
if you have a CWM recovery then you can go to recovery.. wipe data/cache/dalvik.. the flash rom then again wipe cache/dalvik and reboot... the first reboots always take more time so be patient

[Q] S Duos stuck on Samsung logo screen

I have a S duos 7562. I had rooted it earlier with CWM recovery and was working well.
Then I switched off USB debugging mode. Made Whats App system app through Lucky Patcher and rebooted. Then again made Facebook, ChipChain (game) and Times of India App to System App without booting again and again.
Rebooted and my phone got stuck at Samsung logo. Waited for half an hour but no result.
Then applied Resen/Factory setting and rebooted but no result.
Then started Odin and applied stuck recovery and rebooted but no result.
Then Wiped Cache Data and rebutted but again stuck.
Again started odin and applied recovery and rebooted and again stuck.
Then tried to unzip which is available in my SD card but no CWM available and got some failure notice in RED.
I am not able do anything. Please help me to come out of it.
I had backed Up all data in SD card. Titanium Back Up was installed and had backed up some apps and data. And backed up some important data by Kies.
I don't know what to do !!:crying:
titto_taco said:
I have a S duos 7562. I had rooted it earlier with CWM recovery and was working well.
Then I switched off USB debugging mode. Made Whats App system app through Lucky Patcher and rebooted. Then again made Facebook, ChipChain (game) and Times of India App to System App without booting again and again.
Rebooted and my phone got stuck at Samsung logo. Waited for half an hour but no result.
Then applied Resen/Factory setting and rebooted but no result.
Then started Odin and applied stuck recovery and rebooted but no result.
Then Wiped Cache Data and rebutted but again stuck.
Again started odin and applied recovery and rebooted and again stuck.
Then tried to unzip which is available in my SD card but no CWM available and got some failure notice in RED.
I am not able do anything. Please help me to come out of it.
I had backed Up all data in SD card. Titanium Back Up was installed and had backed up some apps and data. And backed up some important data by Kies.
I don't know what to do !!:crying:
Click to expand...
Click to collapse
Is there any good reason to convert these apps to system?????????????????????????????
Factory reset will reset DATA (user apps) but not SYSTEM. The only way is to install TWRP, delete the converted apps via TWRP recovery file manager OR flashing a full stock firmware via ODIN.
LS.xD said:
Is there any good reason to convert these apps to system?????????????????????????????
Factory reset will reset DATA (user apps) but not SYSTEM. The only way is to install TWRP, delete the converted apps via TWRP recovery file manager OR flashing a full stock firmware via ODIN.
Click to expand...
Click to collapse
Thnx,
No good reason but was trying to test the processing speed of phone because it was laggy.
Please guide me to flash a full stock firmware into the device
Ans is it possible to upgrade to A 4.2
how to work with twrp recovery ?
Note: My debugging mode is off
titto_taco said:
Thnx,
No good reason but was trying to test the processing speed of phone because it was laggy.
Please guide me to flash a full stock firmware into the device
Ans is it possible to upgrade to A 4.2
how to work with twrp recovery ?
Note: My debugging mode is off
Click to expand...
Click to collapse
Flash TWRP via ODIN. Start TWRP and select "advanced" --> "file manager" . Navigate to your system apps folder and delete the converted apps. Then perform a factory reset again
Here are the firmware files for your phone. Official release is Android 4.0.4. Just flash the downloaded file via ODIN. You need to pick the right "region" for your phone.
How to start TWRP ?
after installing via Odin, TWRP doesn't start !!
titto_taco said:
How to start TWRP ?
after installing via Odin, TWRP doesn't start !!
Click to expand...
Click to collapse
Power off the phone. Press Vol up + home + power at the same time
LS.xD said:
Power off the phone. Press Vol up + home + power at the same time
Click to expand...
Click to collapse
tried a lot ............Not Starting
Stock firmware will take more 5 hrs to download.:crying:
titto_taco said:
tried a lot ............Not Starting
Stock firmware will take more 5 hrs to download.:crying:
Click to expand...
Click to collapse
Did you uninstall KIES before using ODIN?
LS.xD said:
Did you uninstall KIES before using ODIN?
Click to expand...
Click to collapse
I don't have kies in my system !!
titto_taco said:
I don't have kies in my system !!
Click to expand...
Click to collapse
Pretty good I hpe you were so clever starting the firmware download already as you said it will need 5 hours...
LS.xD said:
Pretty good I hpe you were so clever starting the firmware download already as you said it will need 5 hours...
Click to expand...
Click to collapse
That download got timed out.
I got a new link and hopefully waiting. More 40 mins This is really fast.
Will it install directly through Odin ?
LS.xD said:
Pretty good I hpe you were so clever starting the firmware download already as you said it will need 5 hours...
Click to expand...
Click to collapse
That download got timed out.
I got a new link and hopefully waiting. More 40 mins This is really fast.
Will it install directly through Odin ? And how long does it take load the new one ?
titto_taco said:
That download got timed out.
I got a new link and hopefully waiting. More 40 mins This is really fast.
Will it install directly through Odin ? And how long does it take load the new one ?
Click to expand...
Click to collapse
Put the downloaded tar.md5 in "AP" when using ODIN. Flashing will take 5-10 minutes
LS.xD said:
Put the downloaded tar.md5 in "AP" when using ODIN. Flashing will take 5-10 minutes
Click to expand...
Click to collapse
What is AP ?
titto_taco said:
What is AP ?
Click to expand...
Click to collapse
Open ODIN, there is a button "AP"...
LS.xD said:
Open ODIN, there is a button "AP"...
Click to expand...
Click to collapse
There is no AP button
PIT, PDA, BOOTLOADER, PHONE, CSC,
Check Box : Re-partition, Auto Reboot, F. Reset Time, Phone EFS Clear, Phone Bootloader Update,
Check Box (Not Highlighted): Dump (AP RAM), ID
titto_taco said:
There is no AP button
PIT, PDA, BOOTLOADER, PHONE, CSC,
Check Box : Re-partition, Auto Reboot, F. Reset Time, Phone EFS Clear, Phone Bootloader Update,
Check Box (Not Highlighted): Dump (AP RAM), ID
Click to expand...
Click to collapse
Then you have a OLD version of ODIN. AP = PDA ...
LS.xD said:
Then you have a OLD version of ODIN. AP = PDA ...
Click to expand...
Click to collapse
Oooo Hoooo...Finally :laugh::laugh::laugh::laugh:
Thank You Thank You :good::good::good:
I am glad and will be grateful to you.

[Q] Samsung Galaxy S GT-I9000M keeps rebooting

Here's my problem:
I have a Samsung Galaxy S GT-I9000M that keeps rebooting after trying to install a custom recovery so that I can root it.
What I did
I followed the steps (1 to 11), of Installing a custom recovery on Galaxy S mentioned in the following page:
wiki,cyanogenmod,org/w/Install_CM_for_galaxysmtd
After that, I simply unplugged the usb, there were no errors, and removed the battery and now what I get is the simply that my device reboots after the boot logo. IF I hold down volume + home + power I can boot in download mode. However, I cannot boot in recovery or in normal mode !
Here's a video of what it is doing youtube,com/watch?v=Wie9eZYyECw
What I have tried
Removing the battery and reboot the cellphone
I tried to redo step 7, heimdall flash --kernel zImage --no-reboot, but I still got the same error
etiennenoel said:
Here's my problem:
I have a Samsung Galaxy S GT-I9000M that keeps rebooting after trying to install a custom recovery so that I can root it.
What I did
I followed the steps (1 to 11), of Installing a custom recovery on Galaxy S mentioned in the following page:
wiki,cyanogenmod,org/w/Install_CM_for_galaxysmtd
After that, I simply unplugged the usb, there were no errors, and removed the battery and now what I get is the simply that my device reboots after the boot logo. IF I hold down volume + home + power I can boot in download mode. However, I cannot boot in recovery or in normal mode !
Here's a video of what it is doing youtube,com/watch?v=Wie9eZYyECw
What I have tried
Removing the battery and reboot the cellphone
I tried to redo step 7, heimdall flash --kernel zImage --no-reboot, but I still got the same error
Click to expand...
Click to collapse
try flash other recovery, older version, if that dont help, try to wipe everything from recovery (data,cache,dalvik). and ther reboot
Paget96 said:
try flash other recovery, older version, if that dont help, try to wipe everything from recovery (data,cache,dalvik).
Click to expand...
Click to collapse
If that doesn't work, can I return to the default recovery (if that exist) and if yes, how can I do that ?
etiennenoel said:
If that doesn't work, can I return to the default recovery (if that exist) and if yes, how can I do that ?
Click to expand...
Click to collapse
I dont find anything on internet :/ only what can you do is to flash stock ROM :/
Paget96 said:
I dont find anything on internet :/ only what can you do is to flash stock ROM :/
Click to expand...
Click to collapse
Ok ok. I have two questions for that, first, do you know where I can find the stock rom. And secondly, can I do that via download mode since it is the only thing I can access ?
etiennenoel said:
Ok ok. I have two questions for that, first, do you know where I can find the stock rom. And secondly, can I do that via download mode since it is the only thing I can access ?
Click to expand...
Click to collapse
sure
wait
I found android 2.3.5 stock official firmware
can this ??
---------- Post added at 04:09 PM ---------- Previous post was at 04:00 PM ----------
http://www.sammobile.com/firmwares/3/?download=4379
this is latest for it
Instructions
Extract (unzip) the firmware file
Download Odin v3.09
Extract Odin zip-file
Open Odin v3.09
Reboot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait a few minutes
Thank you for that ! I have one question, I have plugged my phone in my computer, however, Odin does not detect it. My phone is recognized as Gadget Serial, do I have to do somehting so that my phone will be recognized ? I have tried to install the following drivers without success ! forum,xda-developers.com/showthread.php?t=961956
Forget this I had to remove the previous driver !

Please Help!

Hi i have Galaxy fit s5670 and on it was cm11 installed and suddenly it shut down and when i turn it on it stuck on galaxy fit logo. Then i tried to flash original rom(not only one) but there the problems started, it went good in odin multi downloader but i have unknown problems with csc codes it says Cant acess to /system/csc/ATL/system what is ATL? and when i go to recovery (stock) Wipe data/factory reset not working it just freezes like in the picture. Any Help?
Antonio GT-I8730T said:
Hi i have Galaxy fit s5670 and on it was cm11 installed and suddenly it shut down and when i turn it on it stuck on galaxy fit logo. Then i tried to flash original rom(not only one) but there the problems started, it went good in odin multi downloader but i have unknown problems with csc codes it says Cant acess to /system/csc/ATL/system what is ATL? and when i go to recovery (stock) Wipe data/factory reset not working it just freezes like in the picture. Any Help?
Click to expand...
Click to collapse
Just Download your stock firmware from here
And reboot into download mode and flash it!
Enjoy
Newyork! said:
Just Download your stock firmware from here
And reboot into download mode and flash it!
Enjoy
Click to expand...
Click to collapse
yes i tried but i am not sure what is my firmware, i tried few ot them but i am always stuck on Cant acess to /system/csc/ATL/system and when i go to recovery i cant wipe data/ factory reset it just freezes on formatting/data.
Antonio GT-I8730T said:
yes i tried but i am not sure what is my firmware, i tried few ot them but i am always stuck on Cant acess to /system/csc/ATL/system and when i go to recovery i cant wipe data/ factory reset it just freezes on formatting/data.
Click to expand...
Click to collapse
When you flash with odin you should be in download mode not in recovery.....
Newyork! said:
When you flash with odin you should be in download mode not in recovery.....
Click to expand...
Click to collapse
No i was not in recovery i know that but never mind i fixed phone it is alive now i just needed to flash four package file not single tar.md5 file and that saved my phone.
Thanks for helping!
Antonio GT-I8730T said:
No i was not in recovery i know that but never mind i fixed phone it is alive now i just needed to flash four package file not single tar.md5 file and that saved my phone.
Thanks for helping!
Click to expand...
Click to collapse
Happy for you!
Mind sharing the link where you got four files to flash?
Newyork! said:
Happy for you!
Mind sharing the link where you got four files to flash?
Click to expand...
Click to collapse
Yes of course here it is https://www.dropbox.com/s/b98a0u2777a2fsu/S5670XWKTI_S5670DBTKT1_DBT.rar it is german firmware.

Cant boot into Download Mode or Recovery

Hello,
i just flashed TWRP in Odin and now i´m not able to boot into Download Mode or Recovery anymore. When i just press the power button the phone shows the splash screen and the boot animation but doesnt get past that. I also cant reach the phone with ADB. Is there any way to flash a file without Odin/Download Mode?
Need help
MICH_*** said:
Hello,
i just flashed TWRP in Odin and now i´m not able to boot into Download Mode or Recovery anymore. When i just press the power button the phone shows the splash screen and the boot animation but doesnt get past that. I also cant reach the phone with ADB. Is there any way to flash a file without Odin/Download Mode?
Need help
Click to expand...
Click to collapse
i don't understand how you can't enter to download mode , did you do this combo keys (hold vol.down+hold home +hold power) right ?
are you sure flashed correctly twrp for your model device ?
if you can't enter to download mode , i'm sorry bro to tell you , your phone is hard bricked .
shiko2007 said:
i don't understand how you can't enter to download mode , did you do this combo keys (hold vol.down+hold home +hold power) right ?
are you sure flashed correctly twrp for your model device ?
if you can't enter to download mode , i'm sorry bro to tell you , your phone is hard bricked .
Click to expand...
Click to collapse
Maybe one of the buttons is broken or so. Sometimes it does boot to download mode, sometimes it doesnt. I managed to install a custom rom. I tried two Roms and none of them is able to boot. Both get stuck on bootanimation. I did not turn on USB debugging or allow OEM unlock in the stock rom before installing a custum rom.. May this be related to that?
Just tried a AOSP Rom (unofficial Lingue) and it booted like a charm. But Samsung Rom won´t boot. Do you guys know a solution?
MICH_*** said:
Just tried a AOSP Rom (unofficial Lingue) and it booted like a charm. But Samsung Rom won´t boot. Do you guys know a solution?
Click to expand...
Click to collapse
if you can access to download mode .
1-flash latest your firmware
2-flash cf-autoroot again if you (flash latest marshmallow) by odin
if you flash nougat
1-flash latest twrp image for your s6 model
2-flash magisk root latest by twrp
after that you should access to stock rom
shiko2007 said:
if you can access to download mode .
1-flash latest your firmware
2-flash cf-autoroot again if you (flash latest marshmallow) by odin
if you flash nougat
1-flash latest twrp image for your s6 model
2-flash magisk root latest by twrp
after that you should access to stock rom
Click to expand...
Click to collapse
I´m just wondering because an AOSP Rom is able to boot but not a Samsung one.
I flashed 7.0 Stock Firmware and not even this Rom is able to boot. Still stuck at Bootanimation
MICH_*** said:
I flashed 7.0 Stock Firmware and not even this Rom is able to boot. Still stuck at Bootanimation
Click to expand...
Click to collapse
make factory reset and wipe cash &data after flash by odin
if it stuck on boot animation try while you there to make this combo to reboot device (hold vol.down + hold power until boot logo appear )
shiko2007 said:
make factory reset and wipe cash &data after flash by odin
if it stuck on boot animation try while you there to make this combo to reboot device (hold vol.down + hold power until boot logo appear )
Click to expand...
Click to collapse
i have already done that but no success. what else could be the problem? I've got no more ideas how to get it boot
ok let's begin from start , what's your baseband and country firmware you tried to flash ?
what's your original country firmware ?
shiko2007 said:
ok let's begin from start , what's your baseband and country firmware you tried to flash ?
what's your original country firmware ?
Click to expand...
Click to collapse
https://www.sammobile.com/firmwares/galaxy-s6/SM-G920F/DBT/download/G920FXXU5EQDF/129685/
That's the firmware I flashed. My device is unlocked from Germany.
How to tell baseband etc when I don't get into the system?
MICH_*** said:
https://www.sammobile.com/firmwares/galaxy-s6/SM-G920F/DBT/download/G920FXXU5EQDF/129685/
That's the firmware I flashed. My device is unlocked from Germany.
How to tell baseband etc when I don't get into the system?
Click to expand...
Click to collapse
ok bro , download this firmware and try it
https://www.sammobile.com/firmwares/galaxy-s6/SM-G920F/XEO/download/G920FXXU5EQD7/130714/
-before flash it by odin :
make factory reset and wipe cash
-after flash it by odin :
make again factory reset and wipe cash
-wait 10-15 min to boot up
shiko2007 said:
ok bro , download this firmware and try it
https://www.sammobile.com/firmwares/galaxy-s6/SM-G920F/XEO/download/G920FXXU5EQD7/130714/
-before flash it by odin :
make factory reset and wipe cash
-after flash it by odin :
make again factory reset and wipe cash
-wait 10-15 min to boot up
Click to expand...
Click to collapse
What's the difference between the firmware I flashed and this one you provided? I exclude a hardware failure because a AOSP ROM did boot.
Possible for the partition layout to be corrupted?
MICH_*** said:
What's the difference between the firmware I flashed and this one you provided? I exclude a hardware failure because a AOSP ROM did boot.
Possible for the partition layout to be corrupted?
Click to expand...
Click to collapse
bro , the firmware difference between country and others , there firmware can't boot correctly if you installed on device , another firmware will boot correctly .
i don't think there are a failure on hardware cuz you can boot your device correctly and you can use it .
however , you can try flash this firmware without any problem , if also not booted you may need pit file for the firmware for Poland but first try flash without pit
if not work with you only (not boot up)
-flash firmware with this pit file together with
1-check option re-partition
2-make sure you check auto reboot and f.reset time
pit file for fimware
https://drive.google.com/file/d/0BzyeAt2hy6XeSGJyMjZoMDdGYkk/view
shiko2007 said:
bro , the firmware difference between country and others , there firmware can't boot correctly if you installed on device , another firmware will boot correctly .
i don't think there are a failure on hardware cuz you can boot your device correctly and you can use it .
however , you can try flash this firmware without any problem , if also not booted you may need pit file for the firmware for Poland but first try flash without pit
if not work with you only (not boot up)
-flash firmware with this pit file together with
1-check option re-partition
2-make sure you check auto reboot and f.reset time
pit file for fimware
https://drive.google.com/file/d/0BzyeAt2hy6XeSGJyMjZoMDdGYkk/view
Click to expand...
Click to collapse
i flashed the Poland Firmware, same thing.
The Phone is from Germany, I would like to flash German firmware and pit if possible. Why did you exactly recommend this Poland version?
update: With the pit file flashed it doesn't boot either.
MICH_*** said:
i flashed the Poland Firmware, same thing.
The Phone is from Germany, I would like to flash German firmware and pit if possible. Why did you exactly recommend this Poland version?
update: With the pit file flashed it doesn't boot either.
Click to expand...
Click to collapse
ok bro , firmware of Germany
https://www.sammobile.com/firmwares/galaxy-s6/SM-G920F/DBT/download/G920FXXU5EQDF/129685/
pit for this firmware
https://drive.google.com/file/d/0BzyeAt2hy6XeLXVwMVFVdW9yM1k/view
shiko2007 said:
ok bro , firmware of Germany
https://www.sammobile.com/firmwares/galaxy-s6/SM-G920F/DBT/download/G920FXXU5EQDF/129685/
pit for this firmware
https://drive.google.com/file/d/0BzyeAt2hy6XeLXVwMVFVdW9yM1k/view
Click to expand...
Click to collapse
ok bro,
thank you very much but i mentioned above i already tried that file.
MICH_*** said:
ok bro,
thank you very much but i mentioned above i already tried that file.
Click to expand...
Click to collapse
i know bro , try this time to flash firmware with pit and see if it work with you or not
i want to ask you , can you boot up to recovery after flash firmware or not ?
shiko2007 said:
i know bro , try this time to flash firmware with pit and see if it work with you or not
i want to ask you , can you boot up to recovery after flash firmware or not ?
Click to expand...
Click to collapse
I'll flash it today when I'm home.
Yes I can, of course the stock recovery is installed now.
You need to install firmware via the 4 part binary method. Try the process below:
Download and run this:
Samfirm (on phone so having issues getting link, the software is on xda)
When you open the program, type the values given here;
Model: SM-G920F
Region: DBT
Auto: Selected
Manual: Unselected
Binary Nature: Selected
Check CRC32: Selected
Decrypt automatically: Selected
When you write and select options given above, press "Check Update" and then press "Download" to download factory firmware for your device.
Once the download has been finished, extract the zip file that you've downloaded via SamFirm.
After unzip it, download and run Odin
When you open it, press BL and select file which starts with BL from downloaded (from Samfirm) and extacted zip folder.
Do the same thing for AP, CP, CSC.
When you set 4 files to Odin, connect your phone to your PC in download mode and click "Start" on Odin
Credit goes to @forumber2 foe this process, it seems to fix a lot of stock firmware flash fails.

Categories

Resources