I have a S duos 7562. I had rooted it earlier with CWM recovery and was working well.
Then I switched off USB debugging mode. Made Whats App system app through Lucky Patcher and rebooted. Then again made Facebook, ChipChain (game) and Times of India App to System App without booting again and again.
Rebooted and my phone got stuck at Samsung logo. Waited for half an hour but no result.
Then applied Resen/Factory setting and rebooted but no result.
Then started Odin and applied stuck recovery and rebooted but no result.
Then Wiped Cache Data and rebutted but again stuck.
Again started odin and applied recovery and rebooted and again stuck.
Then tried to unzip which is available in my SD card but no CWM available and got some failure notice in RED.
I am not able do anything. Please help me to come out of it.
I had backed Up all data in SD card. Titanium Back Up was installed and had backed up some apps and data. And backed up some important data by Kies.
I don't know what to do !!:crying:
titto_taco said:
I have a S duos 7562. I had rooted it earlier with CWM recovery and was working well.
Then I switched off USB debugging mode. Made Whats App system app through Lucky Patcher and rebooted. Then again made Facebook, ChipChain (game) and Times of India App to System App without booting again and again.
Rebooted and my phone got stuck at Samsung logo. Waited for half an hour but no result.
Then applied Resen/Factory setting and rebooted but no result.
Then started Odin and applied stuck recovery and rebooted but no result.
Then Wiped Cache Data and rebutted but again stuck.
Again started odin and applied recovery and rebooted and again stuck.
Then tried to unzip which is available in my SD card but no CWM available and got some failure notice in RED.
I am not able do anything. Please help me to come out of it.
I had backed Up all data in SD card. Titanium Back Up was installed and had backed up some apps and data. And backed up some important data by Kies.
I don't know what to do !!:crying:
Click to expand...
Click to collapse
Is there any good reason to convert these apps to system?????????????????????????????
Factory reset will reset DATA (user apps) but not SYSTEM. The only way is to install TWRP, delete the converted apps via TWRP recovery file manager OR flashing a full stock firmware via ODIN.
LS.xD said:
Is there any good reason to convert these apps to system?????????????????????????????
Factory reset will reset DATA (user apps) but not SYSTEM. The only way is to install TWRP, delete the converted apps via TWRP recovery file manager OR flashing a full stock firmware via ODIN.
Click to expand...
Click to collapse
Thnx,
No good reason but was trying to test the processing speed of phone because it was laggy.
Please guide me to flash a full stock firmware into the device
Ans is it possible to upgrade to A 4.2
how to work with twrp recovery ?
Note: My debugging mode is off
titto_taco said:
Thnx,
No good reason but was trying to test the processing speed of phone because it was laggy.
Please guide me to flash a full stock firmware into the device
Ans is it possible to upgrade to A 4.2
how to work with twrp recovery ?
Note: My debugging mode is off
Click to expand...
Click to collapse
Flash TWRP via ODIN. Start TWRP and select "advanced" --> "file manager" . Navigate to your system apps folder and delete the converted apps. Then perform a factory reset again
Here are the firmware files for your phone. Official release is Android 4.0.4. Just flash the downloaded file via ODIN. You need to pick the right "region" for your phone.
How to start TWRP ?
after installing via Odin, TWRP doesn't start !!
titto_taco said:
How to start TWRP ?
after installing via Odin, TWRP doesn't start !!
Click to expand...
Click to collapse
Power off the phone. Press Vol up + home + power at the same time
LS.xD said:
Power off the phone. Press Vol up + home + power at the same time
Click to expand...
Click to collapse
tried a lot ............Not Starting
Stock firmware will take more 5 hrs to download.:crying:
titto_taco said:
tried a lot ............Not Starting
Stock firmware will take more 5 hrs to download.:crying:
Click to expand...
Click to collapse
Did you uninstall KIES before using ODIN?
LS.xD said:
Did you uninstall KIES before using ODIN?
Click to expand...
Click to collapse
I don't have kies in my system !!
titto_taco said:
I don't have kies in my system !!
Click to expand...
Click to collapse
Pretty good I hpe you were so clever starting the firmware download already as you said it will need 5 hours...
LS.xD said:
Pretty good I hpe you were so clever starting the firmware download already as you said it will need 5 hours...
Click to expand...
Click to collapse
That download got timed out.
I got a new link and hopefully waiting. More 40 mins This is really fast.
Will it install directly through Odin ?
LS.xD said:
Pretty good I hpe you were so clever starting the firmware download already as you said it will need 5 hours...
Click to expand...
Click to collapse
That download got timed out.
I got a new link and hopefully waiting. More 40 mins This is really fast.
Will it install directly through Odin ? And how long does it take load the new one ?
titto_taco said:
That download got timed out.
I got a new link and hopefully waiting. More 40 mins This is really fast.
Will it install directly through Odin ? And how long does it take load the new one ?
Click to expand...
Click to collapse
Put the downloaded tar.md5 in "AP" when using ODIN. Flashing will take 5-10 minutes
LS.xD said:
Put the downloaded tar.md5 in "AP" when using ODIN. Flashing will take 5-10 minutes
Click to expand...
Click to collapse
What is AP ?
titto_taco said:
What is AP ?
Click to expand...
Click to collapse
Open ODIN, there is a button "AP"...
LS.xD said:
Open ODIN, there is a button "AP"...
Click to expand...
Click to collapse
There is no AP button
PIT, PDA, BOOTLOADER, PHONE, CSC,
Check Box : Re-partition, Auto Reboot, F. Reset Time, Phone EFS Clear, Phone Bootloader Update,
Check Box (Not Highlighted): Dump (AP RAM), ID
titto_taco said:
There is no AP button
PIT, PDA, BOOTLOADER, PHONE, CSC,
Check Box : Re-partition, Auto Reboot, F. Reset Time, Phone EFS Clear, Phone Bootloader Update,
Check Box (Not Highlighted): Dump (AP RAM), ID
Click to expand...
Click to collapse
Then you have a OLD version of ODIN. AP = PDA ...
LS.xD said:
Then you have a OLD version of ODIN. AP = PDA ...
Click to expand...
Click to collapse
Oooo Hoooo...Finally :laugh::laugh::laugh::laugh:
Thank You Thank You :good::good::good:
I am glad and will be grateful to you.
Related
(new member)
I was flashing rom for sm t310 instead of smt311.The error came up when i flashed the rom.After i rebooted my devie its stuck on the logo screen.I tried wipe data and factory reset but nothing helped.
I tried to restore but it failed
But i can still go to recovery and download mode.Whenever i reboot or switch off my tablet it asks if i want to root.Is there any solution to fix my tablet?Thanks!
Luin081 said:
(new member)
I was flashing rom for sm t310 instead of smt311.The error came up when i flashed the rom.After i rebooted my devie its stuck on the logo screen.I tried wipe data and factory reset but nothing helped.
I tried to restore but it failed
But i can still go to recovery and download mode.Whenever i reboot or switch off my tablet it asks if i want to root.Is there any solution to fix my tablet?Thanks!
Click to expand...
Click to collapse
flash rom for your device, its simply
Paget96 said:
flash rom for your device, its simply
Click to expand...
Click to collapse
should i flash my current rom? and is therany way my tablet can be fixed?Thanks
Luin081 said:
should i flash my current rom? and is therany way my tablet can be fixed?Thanks
Click to expand...
Click to collapse
no, only if you backup rom with recovery...
Paget96 said:
no, only if you backup rom with recovery...
Click to expand...
Click to collapse
how should i flash my rom?
Luin081 said:
how should i flash my rom?
Click to expand...
Click to collapse
http://www.sammobile.com/firmwares/3/?download=31090
sign up here, this is an official samsung page for firmwares,etc.
when download ROM follow this:
Instructions
Extract (unzip) the firmware file
Download Odin v3.09
Extract Odin zip-file
Open Odin v3.09
Reboot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait a few minutes
Thanks!!
Hope this will work
everytime i switch off/reboot my device through twrp it says that your device does not appear to be rooted,install super su now?
if i press install it will just reboot back to the logo screen.
Is there anything i should do?
Thank you very much!!
Now my tablet is back to normal again.
Many thanks!!
Hi i have Galaxy fit s5670 and on it was cm11 installed and suddenly it shut down and when i turn it on it stuck on galaxy fit logo. Then i tried to flash original rom(not only one) but there the problems started, it went good in odin multi downloader but i have unknown problems with csc codes it says Cant acess to /system/csc/ATL/system what is ATL? and when i go to recovery (stock) Wipe data/factory reset not working it just freezes like in the picture. Any Help?
Antonio GT-I8730T said:
Hi i have Galaxy fit s5670 and on it was cm11 installed and suddenly it shut down and when i turn it on it stuck on galaxy fit logo. Then i tried to flash original rom(not only one) but there the problems started, it went good in odin multi downloader but i have unknown problems with csc codes it says Cant acess to /system/csc/ATL/system what is ATL? and when i go to recovery (stock) Wipe data/factory reset not working it just freezes like in the picture. Any Help?
Click to expand...
Click to collapse
Just Download your stock firmware from here
And reboot into download mode and flash it!
Enjoy
Newyork! said:
Just Download your stock firmware from here
And reboot into download mode and flash it!
Enjoy
Click to expand...
Click to collapse
yes i tried but i am not sure what is my firmware, i tried few ot them but i am always stuck on Cant acess to /system/csc/ATL/system and when i go to recovery i cant wipe data/ factory reset it just freezes on formatting/data.
Antonio GT-I8730T said:
yes i tried but i am not sure what is my firmware, i tried few ot them but i am always stuck on Cant acess to /system/csc/ATL/system and when i go to recovery i cant wipe data/ factory reset it just freezes on formatting/data.
Click to expand...
Click to collapse
When you flash with odin you should be in download mode not in recovery.....
Newyork! said:
When you flash with odin you should be in download mode not in recovery.....
Click to expand...
Click to collapse
No i was not in recovery i know that but never mind i fixed phone it is alive now i just needed to flash four package file not single tar.md5 file and that saved my phone.
Thanks for helping!
Antonio GT-I8730T said:
No i was not in recovery i know that but never mind i fixed phone it is alive now i just needed to flash four package file not single tar.md5 file and that saved my phone.
Thanks for helping!
Click to expand...
Click to collapse
Happy for you!
Mind sharing the link where you got four files to flash?
Newyork! said:
Happy for you!
Mind sharing the link where you got four files to flash?
Click to expand...
Click to collapse
Yes of course here it is https://www.dropbox.com/s/b98a0u2777a2fsu/S5670XWKTI_S5670DBTKT1_DBT.rar it is german firmware.
Hi guys,
I have flashed SD recovery over Exynos (idiot - I know!)
Have I got any chances to recover the device?
I have got g930f.
Bootloops at Samsung Galaxy S7 logo.
Will boot to download mode, visible in odin but upon flashing anything it will immediately restart and odin will FAIL.
Anything to revive this brick?
Thanks!
bednim said:
Hi guys,
I have flashed SD recovery over Exynos (idiot - I know!)
Have I got any chances to recover the device?
I have got g930f.
Bootloops at Samsung Galaxy S7 logo.
Will boot to download mode, visible in odin but upon flashing anything it will immediately restart and odin will FAIL.
Anything to revive this brick?
Thanks!
Click to expand...
Click to collapse
Hi mate
Probably yes....
You could try to reflash the correct recovery first.....
Custom like TWRP
Check here
Or the original one
Check here
Worse case scenario flash a stock rom (odin) Use all 4 files AP, BL, CP and home_csc to try to save your data ( has to be the same as you have in your phone now) or CSC this will give you a clean installation
Check here
MAX 404 said:
Hi mate
Probably yes....
You could try to reflash the correct recovery first.....
Custom like TWRP
Check here
Or the original one
Check here
Worse case scenario flash a stock rom (odin) Use all 4 files AP, BL, CP and home_csc to try to save your data ( has to be the same as you have in your phone now) or CSC this will give you a clean installation
Check here
Click to expand...
Click to collapse
Thank you,
For whatever reason - donwload mode is somehow corrupted. As soon as I'm starting to flash anything it fails and restarts the phone...
Any other options I could possibly have?
Thanks!
bednim said:
Thank you,
For whatever reason - donwload mode is somehow corrupted. As soon as I'm starting to flash anything it fails and restarts the phone...
Any other options I could possibly have?
Thanks!
Click to expand...
Click to collapse
What error do you get in Odin, check the logs.
Did you try flashing from another PC
re install driver
Un install Kies or smart swicth
Different USB cable
What odin version are you using
MAX 404 said:
What error do you get in Odin, check the logs.
Did you try flashing from another PC
re install driver
Un install Kies or smart swicth
Different USB cable
What odin version are you using
Click to expand...
Click to collapse
Nope, I haven't tried different pc/cable as the very same pc was ok to flash wrong recovery 5min earlier...
I don't have kies installed, I just had samsung drivers which were always working for me.
I am 100% positive its not pc fault just me being an idiot...
I am using odin 3.12
Thank you
bednim said:
Nope, I haven't tried different pc/cable as the very same pc was ok to flash wrong recovery 5min earlier...
I don't have kies installed, I just had samsung drivers which were always working for me.
I am 100% positive its not pc fault just me being an idiot...
I am using odin 3.12
Thank you
Click to expand...
Click to collapse
We are all idiots at one point or another
Just want to point out different reason why odin may fail...
See what error do you get when flashing with Odin...and what files are you using when it fails to flash
MAX 404 said:
We are all idiots at one point or another
Just want to point out different reason why odin may fail...
See what error do you get when flashing with Odin...and what files are you using when it fails to flash
Click to expand...
Click to collapse
I can't check it right now ( I'm at work) but it basically gives me fail on red backdrop. Can't remember what it says in the log, but definitely says Success: 0/ fail: 1
Last file I tried to flash was whole system rom. Just before that, I tried to flash TWRP for s7 exynos - the correct one but it failed. And, of course, it all started with flashing incorrect twrp which went through perfectly :/
Thanks
bednim said:
I can't check it right now ( I'm at work) but it basically gives me fail on red backdrop. Can't remember what it says in the log, but definitely says Success: 0/ fail: 1
Last file I tried to flash was whole system rom. Just before that, I tried to flash TWRP for s7 exynos - the correct one but it failed. And, of course, it all started with flashing incorrect twrp which went through perfectly :/
Thanks
Click to expand...
Click to collapse
When you get home, just try installing "Samsung Smart Switch" (it's no longer Kies) (http://www.samsung.com/sg/support/smartswitch/Smart_Switch_pc_setup.zip)
I understand that you already have drivers on your PC, but the Samsung Smart Switch might come with some updated drivers for your Samsung S7, which might change the scenario. Installing that, plus using another version of Odin (run it as Admin). I used this one just today. (http://dl.sammobile.com/Odin3-v3.11.1.zip)
If the flashing the recovery still fails, try flashing Stock rom under AP like suggested earlier. If that still fails.
Use Samsung Smart Switch's "Emergency recovery" but do the Initialization (2nd tab) by inputting your Phone model and let Smart Switch download the official firmware from Samsung's servers.
This must be done while your phone is in Download mode, so make sure you have enough juice to wait out the download process.
Good luck!
Hi,
I'm having hard times trying to fix my tablet. Here are the specs:
Model: GT-P3100
Android: 4.2.2
Kernel: 3.0.31-CM
Cyanogenmod v.: 10.1.2-p3100
Recovery: 6.0.1.0
OEM Data Cable
The problem is: The tablet is randomly restarting. So I've tried to flash some roms (Cyanogen12, 13, STOCK Rom) via External SD Card. None of them worked. (Installation aborted, no error messages). Whenever I uninstall any app using the Android App Manager, it uninstalls but then installs again after a few seconds. I already did factory reset, wipe cache, dalvik, .. and even wipe /system, /sd, .. partition didn't work. It always boots on Cyanogen with the same apps installed. Inside the '0' folder there are other folders just like an infinite loop(the same folders I have in the root folder, I have inside the '0' folder, and inside that folder, another '0' folder containing the same files.
Then I did install TWRP using Odin, the device was recognized and the PASS message appeared sucessfully. After the reboot, CWM was still installed and I couldn't load the TWRP Recovery.
Whenever I try to use Kies, a connecting message appears but never ends.
Can anybody help?
my beloved friend,
in odin options remove the Auto reboot option
then flash the twrp
( the device wont reboot)
when it goes PASS
remove the battery and put it back
press the buttons to go to twrp
-Hope- said:
my beloved friend,
in odin options remove the Auto reboot option
then flash the twrp
( the device wont reboot)
when it goes PASS
remove the battery and put it back
press the buttons to go to twrp
Click to expand...
Click to collapse
Still got CWM installed...
It seems my SD is somehow write-protected. I've tried to do a "NAND erase all" but it fails after the "erase..." message.
When I connect the tablet to my Notebook, I can delete/write files. in the Internal Storage. Very weird
ccmkbr said:
Still got CWM installed...
It seems my SD is somehow write-protected. I've tried to do a "NAND erase all" but it fails after the "erase..." message.
When I connect the tablet to my Notebook, I can delete/write files. in the Internal Storage. Very weird
Click to expand...
Click to collapse
there is no need to nand erase, mate make sure you are doing it right.
-Hope- said:
there is no need to nand erase, mate make sure you are doing it right.
Click to expand...
Click to collapse
I've done the following steps:
1 - Turned the Tablet On in Download Mode.
2 - Unticked Auto Reboot.
3 - Selected the TWRP file in "AP".
4 - Plugged the USB Cable.
5 - Clicked on Start.
6 - Waited for the "Pass" message.
7 - Unplugged the USB Cable.
8 - Removed the battery plug.
9 - Waited 10 seconds and plugged in again.
10 - Restarted in Recovery mode.
But I still got the CWM installed.
The pictures of the procedures that I did are attached.
ccmkbr said:
I've done the following steps:
1 - Turned the Tablet On in Download Mode.
2 - Unticked Auto Reboot.
3 - Selected the TWRP file in "AP".
4 - Plugged the USB Cable.
5 - Clicked on Start.
6 - Waited for the "Pass" message.
7 - Unplugged the USB Cable.
8 - Removed the battery plug.
9 - Waited 10 seconds and plugged in again.
10 - Restarted in Recovery mode.
But I still got the CWM installed.
The pictures of the procedures that I did are attached.
Click to expand...
Click to collapse
if you are rooted, try to use the twrp app from playstore
-Hope- said:
if you are rooted, try to use the twrp app from playstore
Click to expand...
Click to collapse
Yes, I'm rooted. Sadly, the tablet reboots whenever I try to install an Application (Via Playstore or Apk).
I already did try installing TWRP using ADB Shell(direcly inside the mmc block) but CWM keeps being the recovery.
Trying to do a Nand erase, I've got an error, as you can see in the attachment.
ccmkbr said:
Yes, I'm rooted. Sadly, the tablet reboots whenever I try to install an Application (Via Playstore or Apk).
I already did try installing TWRP using ADB Shell(direcly inside the mmc block) but CWM keeps being the recovery.
Trying to do a Nand erase, I've got an error, as you can see in the attachment.
Click to expand...
Click to collapse
Why did you check repartition?
-Hope- said:
Why did you check repartition?
Click to expand...
Click to collapse
To avoid any more trouble in the future, I was sending the PIT file as well.
ccmkbr said:
To avoid any more trouble in the future, I was sending the PIT file as well.
Click to expand...
Click to collapse
Mate, pit may kill your device or mess up the phone it it was lucky to boot.
To let you know, nand erase will require you to load the firmware
Please don't do an erase, lucky that your phone booted, please uncheck repartition
And band erase
You said you are having problem installing apps,
When did this happen?
After flashing pit?
-Hope- said:
Mate, pit may kill your device or mess up the phone it it was lucky to boot.
To let you know, nand erase will require you to load the firmware
Please don't do an erase, lucky that your phone booted, please uncheck repartition
And band erase
You said you are having problem installing apps,
When did this happen?
After flashing pit?
Click to expand...
Click to collapse
No, it was included in the initial problem(random reboots), that's why I'm trying to recovery the Tab. This is my uncle's tablet, he said he didn't do anything unusual lately. The cyanogen mod was installed by a technician, a long time ago.
I'm 99% sure it's EMMC problem related, as -Hope- told me via Discord.
For more information, see: https://forum.xda-developers.com/galaxy-tab-2/general/discussion-alternative-tab-2-emmc-bug-t3306862
I would like to thanks -Hope- for all the efforts trying to revive my Tablet . I said before and I'll say again, you are a GREAT person!! Really thanks buddy!
Hi,
I have S8 Plus SM-G955F in Germany.
Dont knwo what exactly happend, but my phone was just still running fine (bootloader is unlocked) and I rebooted but then was stuck at "Installing system updates" screen which appear before getting into recovery. However, it does not enter into recovery and reboots after few seconds into "installing updates" mode which then fails.
It does not boot up into Android.
All I can access to is Download Mode.
I flashed "BL_G955FXXU1AQF7_CL11544126_QB13847503_REV00_user_low_ship.tar" Bootloader and rebooted and now it is stuck in Samsung boot logo. If I press Vol up + Bixpy Button + Power nothing happends, it does not even start to load Recovery mode.
I now downloaded following stock firmware through SamFirm: "SM-G955F_1_20171214140840_hlcm4r582t_fac.zip.enc4" (3332 MB)
but when trying to flash it in odin I get FAILED !!! Also if I try to flash TWRP recovery "twrp-3.1.0-1-dream2lte.img" I get FAILED in Odin I now also tried to flash "AP_G955FXXU1AQH3_CL12050265_QB14545623_REV00" firmware using this tutorial: https://www.youtube.com/watch?v=2y0ZZxcNVnE which also FAILED. I think I am completely bricked !!
Please help, phone is completeley useless now
Thanks!
tobyffm said:
SM-G955F_1_20171214140840_hlcm4r582t_fac.zip.enc4" (3332 MB)
Click to expand...
Click to collapse
I had the same problem with downloading stock firmware. My problem was that I couldn't download from SamMobile because of server maintenance. So I downloaded from here. An with this tool there's the option to decrypt the file automatically. I forgot to tick this option and had a .enc4-file like you have there. The problem could decrypt this file and then I could unzip it and use it with odin.
So that's your problem: you are trying to use an encrypted file. But you have to use an decrypted file.
Maltonator said:
I had the same problem with downloading stock firmware. My problem was that I couldn't download from SamMobile because of server maintenance. So I downloaded from here. An with this tool there's the option to decrypt the file automatically. I forgot to tick this option and had a .enc4-file like you have there. The problem could decrypt this file and then I could unzip it and use it with odin.
So that's your problem: you are trying to use an encrypted file. But you have to use an decrypted file.
Click to expand...
Click to collapse
Hi,
thank you! But its actually not my problem. Samfirm decrypted and I got the zip with the BL, AP, CSC, CP files in it. But ODIN fails everytime anyway and I have no idea what I could still do now.
tobyffm said:
Hi,
thank you! But its actually not my problem. Samfirm decrypted and I got the zip with the BL, AP, CSC, CP files in it. But ODIN fails everytime anyway and I have no idea what I could still do now.
Click to expand...
Click to collapse
But you flashed all four files at the same run together?
Maltonator said:
But you flashed all four files at the same run together?
Click to expand...
Click to collapse
Yes, like the howto video described.
tobyffm said:
Dont knwo what exactly happend, but my phone was just still running fine (bootloader is unlocked) and I rebooted but then was stuck at "Installing system updates" screen which appear before getting into recovery.
Click to expand...
Click to collapse
But this happens with my phone to if I press volume up.
tobyffm said:
If I press Vol up + Bixpy Button + Power nothing happends, it does not even start to load Recovery mode.
Click to expand...
Click to collapse
But you have to press Vol down
Maltonator said:
But this happens with my phone to if I press volume up.
But you have to press Vol down
Click to expand...
Click to collapse
Usual behaviour was this: Vol up, bixpy and Power -> Recovery mode which fist starts with "Installing update..." then failed and then it goes into some black recovery mode where you can choose Apply update.zip etc. right? However, in my case this black screen with more commands did not show up, before it was rebooting again by itself.
Now I cannot even get into this "installing updates" mode before recovery, because "Vol up, bixpy and Power" does not bring any action.
Vol down, Bixpy and Power still works and brings me to Download Mode. But it doesnt help me, because once I tr to flash any firmware in Download Mode, it FAILS in Odin, so I am completely stuck, hope you understand
tobyffm said:
Usual behaviour was this: Vol up, bixpy and Power -> Recovery mode which fist starts with "Installing update..." then failed and then it goes into some black recovery mode where you can choose Apply update.zip etc. right? However, in my case this black screen with more commands did not show up, before it was rebooting again by itself.
Now I cannot even get into this "installing updates" mode before recovery, because "Vol up, bixpy and Power" does not bring any action.
Click to expand...
Click to collapse
But why do you boot in recovery mode?
tobyffm said:
Vol down, Bixpy and Power still works and brings me to Download Mode. But it doesnt help me, because once I tr to flash any firmware in Download Mode, it FAILS in Odin, so I am completely stuck, hope you understand
Click to expand...
Click to collapse
Download mode is the only mode you need for restoring stock firmware.
Try this guide. (Spoiler "Flashing Standard Firmware:")
Yesterday I did it with this one too and it worked flawlessly. But I used Odin v3.12.3 not as said in the guide V3.12.7.
Maltonator said:
But why do you boot in recovery mode?
Download mode is the only mode you need for restoring stock firmware.
Try this guide. (Spoiler "Flashing Standard Firmware:")
Yesterday I did it with this one too and it worked flawlessly. But I used Odin v3.12.3 not as said in the guide V3.12.7.
Click to expand...
Click to collapse
it automatically loaded into recovery before, I was not able to boot into Android, it loaded recovery (but without black screen with more commands) automatically by default and rebooted, loaded recovery again and rebooted, loaded recovery againd and rebooted etc...all I could to to interrupt this was loading download mode.
However, thanks for the link, but it does describe what I did already. And yes, I also used Odin 3.12.3 already because in the video tutorial I linked some posts before they said also, I need to use that version.
However, it simply does not work. Odin FAILS everytime
I am not doing anything wrong, I am sure. The only thing could be that the Firmware I downloaded is still wrong, even I cannot imagine this.
tobyffm said:
I am not doing anything wrong, I am sure. The only thing could be that the Firmware I downloaded is still wrong, even I cannot imagine this.
Click to expand...
Click to collapse
Yes that's the only thing that comes on my mind too if you think everything else is right. Download another firmware file maybe from a different provider than SamMobile.
Or try using different USB-Port, USB-Cable and/or different PC.
Maltonator said:
Yes that's the only thing that comes on my mind too if you think everything else is right. Download another firmware file maybe from a different provider than SamMobile.
Or try using different USB-Port, USB-Cable and/or different PC.
Click to expand...
Click to collapse
Did already, did not help. I think maybe there is something realldy bricked, so flashing stock firmware wont be possible at all anymore?! Is this possible somehow?
btw: Just managed to load into TWRP, randomly it does load twrp, dont know how, because if I press the keys for loading into recovery, it actually does not do anything, but currently I see twrp.
Is see anything I can try from there? btw: formated data (incl. internal storage) earlier already, but it did not change anything.
But any idea what I can try to flash from TWRP maybe? Is there a way to flash stock firmware from TWRP somehow?
I found a backup in twrp, I am currently trying to restore it...
tobyffm said:
But any idea what I can try to flash from TWRP maybe? Is there a way to flash stock firmware from TWRP somehow?
I found a backup in twrp, I am currently trying to restore it...
Click to expand...
Click to collapse
Google found this. But I don't know if this works. I only flashed custom ROMs via TWRP. Stock ROMs always via Odin.
Maltonator said:
Google found this. But I don't know if this works. I only flashed custom ROMs via TWRP. Stock ROMs always via Odin.
Click to expand...
Click to collapse
Puuuuh, I was able to fix phone with hat TWRP backup I found!
Thanks for your efforts anyway, much appreciated!
tobyffm said:
Puuuuh, I was able to fix phone with hat TWRP backup I found!
Thanks for your efforts anyway, much appreciated!
Click to expand...
Click to collapse
Glad it worked! :good:
tobyffm said:
it automatically loaded into recovery before, I was not able to boot into Android, it loaded recovery (but without black screen with more commands) automatically by default and rebooted, loaded recovery again and rebooted, loaded recovery againd and rebooted etc...all I could to to interrupt this was loading download mode.
However, thanks for the link, but it does describe what I did already. And yes, I also used Odin 3.12.3 already because in the video tutorial I linked some posts before they said also, I need to use that version.
However, it simply does not work. Odin FAILS everytime
I am not doing anything wrong, I am sure. The only thing could be that the Firmware I downloaded is still wrong, even I cannot imagine this.
Click to expand...
Click to collapse
My mistake, sorry - I posted in the wrong place- sorry. (I do hope you find a way to get t his fixed) good luck
I just ran into this thread: https://forum.xda-developers.com/galaxy-s8/help/stuck-bootloop-flashing-aqg5-fix-t3636857
It looks like you're not the only one...
You know, you might want to try and remove the more current apps you installed and see if that is causing the loop, and if that does not work, just dirty flash over what you have. For me, a lot of time a dirty flash will solve the issue, as it overwrites the OEM software, and in that manner, takes my phone OS back to normal/new state, while leaving my data.