Recovery was deleted during flash? - Verizon Samsung Galaxy S III

So I was trying to get HyperDrive running on my phone and had flashed it a few times. I was using TWRP to flash and accidently picked Format for the wipe. Then I flashed Liquid Rom. Realizing it was more of an AOSP rom I tried flashing Hyperdrive again. Again being stupid hit the Format wipe. Then when I tried flashing the rom it flashed but when it rebooting the splash/loadscreen for the rom just continuously played. Also I can no longer access TWRP. I tried using ODIN to put a stock rom on again, but I meet the same problem of the continuously loading screen.
Help Please? I'm slowly losing it...

Take the battery out then replace it then hit the power button and home button and volume up and try to get to recovery
Sent from my SCH-I535 using Tapatalk 2

did it and it goes to the samsung with the unlocked lock and says on the top "booting recovery" then goes black vibrates and then reboots

Okay I finally got it working. Not sure what caused it but it seems flashing a ODIN package that supported recovery worked its magic. From there I was able to access the stock recovery and then Flashed an ODIN package containing a stock rooted rom.

Related

Phone bootloops even after flashing stock

I tried to install a new kernel on my phone, but it went south and started bootlooping. I flashed to stock with Odin, but it still bootlooped. I flashed the stock kernel, and guess what? Still bootlooping.
What can I do? I don't think it's bricked, since I can still access recovery, but I can't think of where to go from here.
Wipe cache, wipe dalvik cache, flash kernel. What kernel is it?
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
No recovery mode
Hey,
I tried upgrading to ICS (4.0.4- official Rogers) using Kies. that went poorly, and I soft bricked (bootloop). I tried putting the stock ROM back on and I still have the bootloop.
things to know:
No recovery mode - phone vibrates and reboots when you hold down power and vol up and down
When using odin phone screen stays on download mode screen until it reboots.
Would I need to use commands to factory reset the phone?

Bricked galaxy tab 2 7.0

I think I bricked my tab 2 (gt-p3113) it keeps on looping at boot, I recently flashed cm10 on it then flashed stock rom (it was laggy, so I tried flashing clockworkmod recovery to reinstall cm10) after flashing clockworkmod, it kept on looping. I don't know what the problem is, please help.
UPDATE: I kept on pressing random buttons to reach download mode, but I need a stock rom + stock recovery (this rom was 4.0.3) for my device (samsung-updates site is moving servers or so)
I downloaded my stock rom from this post : http://forum.xda-developers.com/showthread.php?t=1645295&page=3 it's laggy + apps kept on crashing)
I need a new stock rom because flashing clockworkmod recovery on this rom always causes a bootloop, I want to install cwm recovery to restore my data.
first, try to download the stock recovery from sammobie.com , put it on your external sd & then try to re install CWM via odin, wipe your data and everything (if you're returning from CM10 to stock one) and then re-flash the stock ROM, hope this might help you
rickywinataa said:
first, try to download the stock recovery from sammobie.com , put it on your external sd & then try to re install CWM via odin, wipe your data and everything (if you're returning from CM10 to stock one) and then re-flash the stock ROM, hope this might help you
Click to expand...
Click to collapse
I couldn't find it on sammobile, but I googled it (794MB, downloading..) I think the problem was that I flashed cwm for 4.0.4 (seeing as I had 4.0.4 before cm10) then the stock rom I flashed was 4.0.3 (I can't update my device via OTA, idk why)
I'm just afraid the newest firmware I'm downloading lags and so, because the one I downloaded earlier (the 4.0.3 one) keeps lagging and force closing apps.
UPDATE: I flashed it, works perfectly fine, now I'm on my way to flash clockworkmod recovery and to root it in order to run cm10, but is there a way I can ONLY flash the stock recovery back? the md5 file I downloaded contains recovery.img is there a way I can flash it in odin without the whole ROM?
Bibicp said:
I think I bricked my tab 2 (gt-p3113) it keeps on looping at boot, I recently flashed cm10 on it then flashed stock rom (it was laggy, so I tried flashing clockworkmod recovery to reinstall cm10) after flashing clockworkmod, it kept on looping. I don't know what the problem is, please help.
UPDATE: I kept on pressing random buttons to reach download mode, but I need a stock rom + stock recovery (this rom was 4.0.3) for my device (samsung-updates site is moving servers or so)
I downloaded my stock rom from this post : http://forum.xda-developers.com/showthread.php?t=1645295&page=3 it's laggy + apps kept on crashing)
I need a new stock rom because flashing clockworkmod recovery on this rom always causes a bootloop, I want to install cwm recovery to restore my data.
Click to expand...
Click to collapse
Your Tab is not bricked. A bricked Tab / Phone will not turn on. There won't be any response from the device, whatever you do. Because, I bricked one of my friends Mobile.
All you need to do you is, to install a proper firmware on your Tab 2. PM me if you need any help.
Mine started acting like it was bricked. Refused to turn on. I held the power button for 2+ minutes, nothing. Then I let it charge for 4+ hours and tried to turn it on, again, nada. I then unplugged it and held the power button and it booted. The first time the screen went to sleep it would not respond again. Plugged the cable in for a minute, then unplugged and it started. Battery was at 90%. It is on it's way back to Samsung now. They say 7-10 business days, we'll see.

[Q] Recovery problems

So I flashed the new synergy to try out the multiwindow pinning, but had the intention of going back to my nandroid right after trying it out. After flashing it and booting it up, and trying it out, I tried going back to my recovery (TWRP). But when my phone showed the TWRP welcome screen, it just stuck there and flashed every couple of seconds (like every 5 seconds) instead of going up and revealing the recovery. So I pulled battery and tried the hardware keys for recovery. It did the same thing. So I tried booting back up to my system, but it kept trying to go into recovery, so I went to download mode and pressed the down button to reboot (this time successfully). I did this about three times, and it kept failing to go to recovery. So I decided the flash cwm. With cwm I was able to get to recovery and move around in the menus, but as soon as I try factory resetting to flash another rom I had on my sd card, it froze. So I rebooted back up to my system using the download mode again. So now I have a booting phone but my recoveries don't work. I have flashed roms numerous times without problems, I checked to make sure my bootloader is unlocked, and am rooted. Can anyone tell me how to get my recoveries to work?
Edit: I just tried goo manager and installed the latest twrp. It went to recovery. Ill edit if I have any other issues.

Can't Install custom recovery on P5100 :(

Hi all I have P5100 and having issues installing custom recover.
I used both odin 3.07/3.09
Tried both CWM and Philz. I flash recovery on Samsung phones all the time so I am pretty sure my procedure is rock solid.
After flashing with Odin it shows Reset, device reboots. After full reboot I shut off then press Power + L Rocker button. It does a quick "Installing blah blah" errors out I see green droid with red sign then it goes to stock recover. This happens in a matter of 2 secs. (First time it was so fast I thought it went straight to stock recovery)
Now I did that a few times... My flash counter is at 6 right now and still can't reboot into custom recovery.
If anyone could point me in the right direction or possibly another way to flash recovery besides odin. Thanks !
Edit: Tablet is currently on stock 4.2.2
Edit 2: Tried all USB ports on my laptop. Tried different cable. Tried different PC. Still won't start custom recovery
Edit 3: [SOLVED] Rooted the damn thing again using odin, reboot, flashed custom. Now done.

ODIN - Stuck at boot screen.

Let me preface from saying I've had this phone and flashed countless ROMs on it.
Also the power button died on it (fast reboot etc problem) and since I had already ordered my Nexus 5 I just decided to rip the button off and use it for the few weeks until I got my new phone.
Now that its been a while I decided to see what I could do with it and wanted to boot. It wouldn't boot and was stuck at the loading screen for a good hour. So I went okay I'll just decide to use Odin and bring it back to stock. Followed the guide here to the T and 3 separate times all that happens is the phone is stuck at the S boot screen. Tried both stock roms posted.
Now since I don't have a power button I can't get into recovery (which I'm assuming is wiped but I have the Odin recovery ready to flash but whats the point?)
I tried adb/fastboot and the phone isn't recognized.
Any suggestions? Currently stuck at the boot logo for 1hr 25min. I'm aware of wiping the cache but I don't know how to do that without recovery.
Edit: So I opened the sucker again, got some foil and shorted the power button contacts and actually got to the stock recovery and did a wipe of the data and cache. Now booting fingers crossed. If this doesn't work at least I know I can get into recovery and install TWRP and a custom rom and see if that boots. However if this is a go then I'm good (only want it t run Perktv)
Edit2: So I couldn't get anything to install with TWRP (tried 3 different roms) so I went to the other recovery (Philz?)
Was able to install SlimKat (was using SlimBean when I was using the phone) and was finally able to install it... now its in a boot loop.
So I guess back to fully wiping (again) but I remember with these phones you had to do the wipe 2x which I didn't do. God I'm so spoiled with the Nexus.
Off to do that and see if that helps.
Edit3: Worked!! Woohoo

Categories

Resources