Data wipe failed - Galaxy Tab 2 Q&A, Help & Troubleshooting

Hi guys ,
I have a samsung galaxy tab 7 .0 (wifi only ) GT - P3113
I tried to instal a rom via Odin3 v1,85 and i now have an error message that reads :
CWM-based recovery v5.5.0.4
Formatting / data ...
E:format_volume : make_extf4fs failed on /dev/block/mmcblk0p10
Formatting /chache...
Data wipe failed.
back menu disabled.
back menu button enabled.
Click to expand...
Click to collapse
Im stuck in the recovery screen and cant reboot or select any options
Anyone tell me what to do please ? :silly:
EDIT :
Ok it finally booted up and i now have a screen that says :
ENCYPTION FAILED
unable to complete encryption due to interruption . Perform factory data reset (erasing all your data) before use .After resetting ,try encrypting device again.
Click to expand...
Click to collapse
So i reset my device and i end back at the recovery screen but with no options that work ( see first quote)
Thanks.

Removed

Sean_Seany said:
Hi guys ,
I have a samsung galaxy tab 7 .0 (wifi only ) GT - P3113
I tried to instal a rom via Odin3 v1,85 and i now have an error message that reads :
Im stuck in the recovery screen and cant reboot or select any options
Anyone tell me what to do please ? :silly:
Click to expand...
Click to collapse
Are you sure you have the correct recovery for your model installed?
Sent from my GT-P5113 using XDA Premium HD app

Yeah pretty sure , i have flashed a few ROMS on the device and have had no problems so far.....well, until now that is.

Sean_Seany said:
Yeah pretty sure , i have flashed a few ROMS on the device and have had no problems so far.....well, until now that is.
Click to expand...
Click to collapse
If you can't select any options your only choice is to try to force reset. Hold down the power button for forever, if that doesn't work I can't tell you. If you can reboot into download mode you can use odin to flash a stock firmware.
Sent from my XT860 using xda premium

Related

help me please :(

i can't open may phone (samsung galaxy fit) i dont know what to do i tried this
Deodexed XXKQ2 ROM_blacklist for G-FIT after the reboot my phone is stuck in boot animation
Reboot in recovery mode and clear cache and wipe data.
Sent from my GT-S5670 using Tapatalk
i already tried that but it always stuck on boot animation, i forgot to install XXKQ2 what will i do? i cant open my samsung galaxy fit im crying now i just bought this phone from my allowance last week and now it is not openning i don't know what to help me, i just want to Deodexed XXKQ2 ROM_blacklist for G-FIT i just follow this link (http://forum.xda-developers.com/showthre...?t=1251069 ) after i do this phone is always stock in boot animation
Sounds like a soft brick to me. If you have Cwm, when the phone boots up.poured the appropriate button to get into recovery mode before the boot animation. For example, I have to press power button plus down key at the sane time upon booting up my ATRIX 4G. From there you can flash act room possible and solve the soft boot problem.
Bear in mind that these methods are for my phone. You have to do done research to see how it works on your device. Don't worry though....soft bricks are "curable".
Sent from my MB860 using XDA App
i already get into recovery mode the menus there are
reboot system now
apply update form sdcard
wipe/data factory reset
wipe cache partition
test redbend fota[FS]
i already tried all the menu but nothing happen my phone is still stuck up in booting animation my phone unit is samsung galaxy fit help me thanks
philipxtian18 said:
i already get into recovery mode the menus there are
reboot system now
apply update form sdcard
wipe/data factory reset
wipe cache partition
test redbend fota[FS]
i already tried all the menu but nothing happen my phone is still stuck up in booting animation my phone unit is samsung galaxy fit help me thanks
Click to expand...
Click to collapse
reboot in recovery mode and wipe data and cache.
If that doesn't work flash a new firmware or stock rom using odin
philipxtian18 said:
i can't open may phone (samsung galaxy fit) i dont know what to do i tried this
Deodexed XXKQ2 ROM_blacklist for G-FIT after the reboot my phone is stuck in boot animation
Click to expand...
Click to collapse
try a factory reset from recovery or else flash a new firmware... prob will be solved
thanks guys reboot in recovery mode and wipe data and cache this doesn't work.
how can i flash a new firmware or stock rom using odin, i hope that after i do this my phone will start working thanks guys i appreciate your help
try to help
philipxtian18 said:
thanks guys reboot in recovery mode and wipe data and cache this doesn't work.
how can i flash a new firmware or stock rom using odin, i hope that after i do this my phone will start working thanks guys i appreciate your help
Click to expand...
Click to collapse
try this step.
Turn off your Samsung Galaxy Fit
Remove your SIM Card and SD Card, just to avoid any issues
Extract the previously downloaded firmware packaged.
Run ODIN 4.38.exe on your PC
Click the OPS button then select BENI_v1.0.ops from extracted archive and load it.
Set the Samsung Galaxy Fit into DOWNLOAD MODE (When the screen is turned on Press and Hold POWER+VOLUME DOWN+OK Button simultaneously) Then Connect the device via USB into PC.
If ODIN detected and recognized the device the COMORT mapping at the left side will change to color yellow.
If all is set and ready: Press "Start" button and wait...
It will then start to Download, the flashing process may takes around ~5 minutes.
If all goes well and successful your phone should reboot automatically
A square on the left will display a "PASS" word it means that the flashing process was successful.
Once all completed, disconnect the phone. Turn off your phone, insert back your SIM Card and SD Card again.
Turn on your phone. Then confirm the new downloaded firmware version by typing **#1234#.
thanks guys for you help my phone now is working i flash a new firmware , i am fro asia(philippines) but i use other firmware is it okay? when i type **#1234#. the screen said that connection problem or invalid MMI code.
philipxtian18 said:
thanks guys for you help my phone now is working i flash a new firmware , i am fro asia(philippines) but i use other firmware is it okay? when i type **#1234#. the screen said that connection problem or invalid MMI code.
Click to expand...
Click to collapse
sorry my mistake, this is the correct *#1234# try again...
Problems can occur if you flash a different region firmware.
I'd advice to flash ddkq5, atleast its Asian
Sent from my GT-S5670 using Tapatalk
the firmware that i use was
Europe:
S5670XXKPG
i don't see any problem thanks guys for the big help

Stuck in boot logo and cant enter recovery

So i installed monster rom but because play store and phone werent working i tried to flash back to the stock rom.
Odin said passed but my phone stucked at samsung logo.
Also my phone wont enter recovery mode cwm or stock.
i have tried to flash other rom.
i have tried to flash the rom via Kies.
during flashing ther is not any problem but it always stucks on samsung logo
i really dont know what to do.
any help?
Thank you.
Alexbool said:
So i installed monster rom but because play store and phone werent working i tried to flash back to the stock rom.
Odin said passed but my phone stucked at samsung logo.
Also my phone wont enter recovery mode cwm or stock.
i have tried to flash other rom.
i have tried to flash the rom via Kies.
during flashing ther is not any problem but it always stucks on samsung logo
i really dont know what to do.
any help?
Thank you.
Click to expand...
Click to collapse
1) Pull Out Battery.
2) Enter Recovery Mode
3) Wipe Data
4) Wipe Cache
5) Advanced>>Wipe Dalvic Cache
6) Reboot System
7) Enjoy.
8 ) Press Thanks
Sent from my GT-I8262 using XDA Premium 4 mobile app
Help
thecoreguy said:
1) Pull Out Battery.
2) Enter Recovery Mode
3) Wipe Data
4) Wipe Cache
5) Advanced>>Wipe Dalvic Cache
6) Reboot System
7) Enjoy.
8 ) Press Thanks
Sent from my GT-I8262 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I tried to install rom,. It showed installation aborted.
So i clicked the reboot, and it showed, no reebot device something.
and now it is stuck in SAMSUNG GALAXY CORE GT-I8262
This is my newww mobile
Everythig back now
Removed battery.
Recovery mod.
Restore.
Done. Thank god
Nandhusiddha said:
I tried to install rom,. It showed installation aborted.
So i clicked the reboot, and it showed, no reebot device something.
and now it is stuck in SAMSUNG GALAXY CORE GT-I8262
This is my newww mobile
Everythig back now
Removed battery.
Recovery mod.
Restore.
Done. Thank god
Click to expand...
Click to collapse
))
Sent from my GT-I9500 using XDA Premium 4 mobile app

[Q] Samsung GT P-3100 (india) Stuck On Samsung Logo

Hi Friends,
I already tried reading most of the threads about this problem but sadly I didn't found the answer to my problem.
i was trying to flash CW 12.1 on my Samsung GT-P3100 (rooted) via mobile odin, but unfortunately it got stuck saying blabla file missing.
then i tried to reboot the tab by pressing power button, but now it is stuck on Samsung logo.
i can go into the download mode but windows can not recognize the USB device
already tried re-install kies, samsung mobile drivers.
nothing worked yet.
can also get into recovery mode showing:
Android system recovery <3e>
Volume up/down to move highlight;
power button to select.
reboot system now
apply update from external storage
wipe data/factory reset
wipe cache partition
apply update from cache
# MANUAL MODE #
-- Appling Multi-CSC . . .
Applied the CSC-code : INU
Successfully applied multi-CSC.
i didn't took backup of it !
don't know the firmware Version.
this is the only devise i have!
Please help me out
RohitGautam said:
Hi Friends,
I already tried reading most of the threads about this problem but sadly I didn't found the answer to my problem.
i was trying to flash CW 12.1 on my Samsung GT-P3100 (rooted) via mobile odin, but unfortunately it got stuck saying blabla file missing.
then i tried to reboot the tab by pressing power button, but now it is stuck on Samsung logo.
i can go into the download mode but windows can not recognize the USB device
already tried re-install kies, samsung mobile drivers.
nothing worked yet.
can also get into recovery mode showing:
Android system recovery <3e>
Volume up/down to move highlight;
power button to select.
reboot system now
apply update from external storage
wipe data/factory reset
wipe cache partition
apply update from cache
# MANUAL MODE #
-- Appling Multi-CSC . . .
Applied the CSC-code : INU
Successfully applied multi-CSC.
i didn't took backup of it !
don't know the firmware Version.
this is the only devise i have!
Please help me out
Click to expand...
Click to collapse
You were on stock firm ware 4.1.2 before flashing?
Sent from my GT-P3100 using Tapatalk
Yes it was!
Sent from my XT1068 using Tapatalk
shsagnik said:
You were on stock firm ware 4.1.2 before flashing?
Sent from my GT-P3100 using Tapatalk
Click to expand...
Click to collapse
Thanks for your reply,
Yes it was!
Sent from my XT1068 using Tapatalk
RohitGautam said:
Yes it was!
Sent from my XT1068 using Tapatalk
Click to expand...
Click to collapse
So can you try downloading Brazilian firmware from sammobile or some other site your wish and then transfer it to your sd card and then try applying update from sd card?
RohitGautam said:
Thanks for your reply,
Yes it was!
Sent from my XT1068 using Tapatalk
Click to expand...
Click to collapse
Sent from my GT-P3100 using Tapatalk
shsagnik said:
So can you try downloading Brazilian firmware from sammobile or some other site your wish and then transfer it to your sd card and then try applying update from sd card?
Sent from my GT-P3100 using Tapatalk
Click to expand...
Click to collapse
I tried it, (downloaded from sammobiles).
it shows " install/sdcard.. "
stuck for a while, then shows fresh recovery page again!
tried indian firmware too! but same result.
what if its kernel would have flashed (don't know anything about it really )
please help me...
RohitGautam said:
I tried it, (downloaded from sammobiles).
it shows " install/sdcard.. "
stuck for a while, then shows fresh recovery page again!
tried indian firmware too! but same result.
what if its kernel would have flashed (don't know anything about it really )
please help me...
Click to expand...
Click to collapse
Try installing cwm or twrp using Odin
Disable kies by killing it from task manager to make sure it doesn't cause any trouble
Sent from my GT-P3100 using Tapatalk

Dead android...Help!!!

I have a Samsung Galaxy S6 G920V while updated to version 6.0.1 it was frozen into "installing system update"
I used the Verizon software repair tools and get the same problem, so I have to reboot the phone several times until the end of the installation process. Sometimes it stays frozen in the samsung logo with with a custom open padlock and sometimes throws the following error:
"supportes API : 3
dm- verity verification failed ...
when I reboot the phone a yellow triangle appears and the dead android .
I have installed several times the firmware G920VVRU4CPC2_G920VVZW4CPC2_G920VVRU4CPC2_HOME.tar.md5 and does the same. How can I solve this?
So, you mast flash:
1) necessarily flash this with full wipe, Nand erase all, re-partition - yadi.sk/d/QDm5ccWSrKnQR
2) then choose
a) if you want 5.1. 1(Lollipop) flash this (may be this cannot work, ) - yadi.sk/d/uJS1hvpKrKnTw
b) if you want 6.0.1 (Marshmallow) flash this - yadi.sk/d/GBK-MoR4rKnWM
Do you mean:
1- using Odin, click on AP and select the file ALL_VZW_G920VVRU4BOG9_G920VVZW4BOG9_CL5358024_QB6580258_REV02_user_low_ship.tar.md5
does the file do a full wipe, Nand erase all, re-partition ?
After this
2- using Odin, click on AP and select the file: V6-C2 (unzipped)
will install the 6.0.1?
Am I right with the procedure?
liceista said:
Do you mean:
1- using Odin, click on AP and select the file ALL_VZW_G920VVRU4BOG9_G920VVZW4BOG9_CL5358024_QB6580258_REV02_user_low_ship.tar.md5
does the file do a full wipe, Nand erase all, re-partition ?
After this
2- using Odin, click on AP and select the file: V6-C2 (unzipped)
will install the 6.0.1?
Am I right with the procedure?
Click to expand...
Click to collapse
This is help me. In Odin you must selects full wipe, Nand erase all, re-partiOdin for 1 flash.
Then must be all right.
I have the same issue and I tried everything!!! Its been a month since I update and my phone is dead. Please Help!!
maurehh said:
I have the same issue and I tried everything!!! Its been a month since I update and my phone is dead. Please Help!!
Click to expand...
Click to collapse
Maurehh
can you reach the recovery mode (Volume up +home + power)?
liceista said:
Maurehh
can you reach the recovery mode (Volume up +home + power)?
Click to expand...
Click to collapse
Yes, I tried to clear the data to factory and to wipe the partition and the same bootloop in the verizon/samsung logo
maurehh said:
Yes, I tried to clear the data to factory and to wipe the partition and the same bootloop in the verizon/samsung logo
Click to expand...
Click to collapse
have you tried to use the Verizon Wireless Software Upgrade ?
liceista said:
have you tried to use the Verizon Wireless Software Upgrade ?
Click to expand...
Click to collapse
Yes, saddly i didn,t work either :S

[Completed] Help, I messed around with /system/ permissions , and it just bricked my phone

as the title says , i messed up with my Galaxy J2's system folder's permissions , i can only go to recovery menu , so adb is my only way , download mode is corrupted also , i have original rom to get it back , i have very important files in it , so wipe data isnt a solution , and i tryed to install my rom with adb sideload , but it keeps saying "E: signature verification failed" and "E:footer is wrong" , how to do ? please answer fast
Bricked_Phone said:
as the title says , i messed up with my Galaxy J2's system folder's permissions , i can only go to recovery menu , so adb is my only way , download mode is corrupted also , i have original rom to get it back , i have very important files in it , so wipe data isnt a solution , and i tryed to install my rom with adb sideload , but it keeps saying "E: signature verification failed" and "E:footer is wrong" , how to do ? please answer fast
Click to expand...
Click to collapse
Greetings and welcome to assist. I'm not sure there is much you can do without download mode. If you are on stock recovery and you can not odin stock I am out of ideas, even if kies emergency firmware recovery works it will wipe data
Regards
Sawdoctor
Problem Fixed ! please lock this thread
btw : my problem was that i forgot that download mode is to click all of volume down + "Home" + power , i forgot about home button and only clicked the two remaining , so it drive me to recovery , which let me think my download mode is corrupted
Glad you got it fixed ?
Sent from my SM-N930F using Tapatalk

Categories

Resources