Database Info

help me please :(

i can't open may phone (samsung galaxy fit) i dont know what to do i tried this
Deodexed XXKQ2 ROM_blacklist for G-FIT after the reboot my phone is stuck in boot animation

Reboot in recovery mode and clear cache and wipe data.
Sent from my GT-S5670 using Tapatalk

i already tried that but it always stuck on boot animation, i forgot to install XXKQ2 what will i do? i cant open my samsung galaxy fit im crying now i just bought this phone from my allowance last week and now it is not openning i don't know what to help me, i just want to Deodexed XXKQ2 ROM_blacklist for G-FIT i just follow this link (http://forum.xda-developers.com/showthre...?t=1251069 ) after i do this phone is always stock in boot animation

Sounds like a soft brick to me. If you have Cwm, when the phone boots up.poured the appropriate button to get into recovery mode before the boot animation. For example, I have to press power button plus down key at the sane time upon booting up my ATRIX 4G. From there you can flash act room possible and solve the soft boot problem.
Bear in mind that these methods are for my phone. You have to do done research to see how it works on your device. Don't worry though....soft bricks are "curable".
Sent from my MB860 using XDA App

i already get into recovery mode the menus there are
reboot system now
apply update form sdcard
wipe/data factory reset
wipe cache partition
test redbend fota[FS]
i already tried all the menu but nothing happen my phone is still stuck up in booting animation my phone unit is samsung galaxy fit help me thanks

philipxtian18 said:
i already get into recovery mode the menus there are
reboot system now
apply update form sdcard
wipe/data factory reset
wipe cache partition
test redbend fota[FS]
i already tried all the menu but nothing happen my phone is still stuck up in booting animation my phone unit is samsung galaxy fit help me thanks
Click to expand...
Click to collapse
reboot in recovery mode and wipe data and cache.
If that doesn't work flash a new firmware or stock rom using odin

philipxtian18 said:
i can't open may phone (samsung galaxy fit) i dont know what to do i tried this
Deodexed XXKQ2 ROM_blacklist for G-FIT after the reboot my phone is stuck in boot animation
Click to expand...
Click to collapse
try a factory reset from recovery or else flash a new firmware... prob will be solved

thanks guys reboot in recovery mode and wipe data and cache this doesn't work.
how can i flash a new firmware or stock rom using odin, i hope that after i do this my phone will start working thanks guys i appreciate your help

try to help
philipxtian18 said:
thanks guys reboot in recovery mode and wipe data and cache this doesn't work.
how can i flash a new firmware or stock rom using odin, i hope that after i do this my phone will start working thanks guys i appreciate your help
Click to expand...
Click to collapse
try this step.
Turn off your Samsung Galaxy Fit
Remove your SIM Card and SD Card, just to avoid any issues
Extract the previously downloaded firmware packaged.
Run ODIN 4.38.exe on your PC
Click the OPS button then select BENI_v1.0.ops from extracted archive and load it.
Set the Samsung Galaxy Fit into DOWNLOAD MODE (When the screen is turned on Press and Hold POWER+VOLUME DOWN+OK Button simultaneously) Then Connect the device via USB into PC.
If ODIN detected and recognized the device the COMORT mapping at the left side will change to color yellow.
If all is set and ready: Press "Start" button and wait...
It will then start to Download, the flashing process may takes around ~5 minutes.
If all goes well and successful your phone should reboot automatically
A square on the left will display a "PASS" word it means that the flashing process was successful.
Once all completed, disconnect the phone. Turn off your phone, insert back your SIM Card and SD Card again.
Turn on your phone. Then confirm the new downloaded firmware version by typing **#1234#.

thanks guys for you help my phone now is working i flash a new firmware , i am fro asia(philippines) but i use other firmware is it okay? when i type **#1234#. the screen said that connection problem or invalid MMI code.

philipxtian18 said:
thanks guys for you help my phone now is working i flash a new firmware , i am fro asia(philippines) but i use other firmware is it okay? when i type **#1234#. the screen said that connection problem or invalid MMI code.
Click to expand...
Click to collapse
sorry my mistake, this is the correct *#1234# try again...

Problems can occur if you flash a different region firmware.
I'd advice to flash ddkq5, atleast its Asian
Sent from my GT-S5670 using Tapatalk

the firmware that i use was
Europe:
S5670XXKPG
i don't see any problem thanks guys for the big help

[Q] Droid 3 - Signature Verification Error.. CWM not Helpful

Hello friends,
First of all I am sorry if I am posting this in a wrong area..
Secondly, Yes, I have read everything related to this topic.
I rooted my phone...
Trying to upgrade it to DROID35.7.905BloatedDeodexed.zip
I get E: signature verification error..
Then I was told to install CWM.. I install Rom Manager v5.5.1.5
However the "Toggle signature checking" option which everyone is talking about, is not there..
When I select the option "Reboot into Recovery", the phone just normally reboots, and never go to recovery mode.
Can you guys pleassse help me in this regard? Is there any way I could turn off this signature verification option?
Is there a way to do it manually, via command line etc?
Any help would be greatly appreciated.
Thanks.

any one ?

Stupid question but are you hitting the right buttons to boot into cwm? Vol up/vol down & power(at least on note)
Sorry if its stupid but I find it best to start simple.
Sent from my SAMSUNG-SGH-I717 using xda app-developers app

Yes I do...
However, when I shutdown phone, then hit power+volUP+volDOWN ... it goes to same android's recovery system, and not to CWM's.
In the CWM I have flashed it again and again successfully..

That's just odd. Maybe go to twrp if cwm isn't working out for you?
Keep in mind I'm no dev or android guru, just taking shots in the dark. When I get a chance ill look more into it and hopefully come up with an answer that sounds like I know what I'm talking about lol.
Sent from my SAMSUNG-SGH-I717 using xda app-developers app

Just installed and used twrp...
In in I hit the "reboot into recovery mode" option..
The mobile restarted into recovery mode, but still same recovery..
Here is what it is writen in recovery mode..
"Android system recovery <3e>"
Android system recovery utility
reboot system now
apply update from sdcard
wipe data/factory reset
wipe cache partition
Click to expand...
Click to collapse
There is just no option to Toggle the varification check ..

You may want to start over with a fresh install
http://www.youtube.com/watch?v=m8tg9AlfOQ8
I mean obviously find the right file for your phone. I had to do this the first time I installed a rom and it went to hell.
Sent from my SAMSUNG-SGH-I717 using xda app-developers app

Dont u got advance options in clockworkmod recovery
Sent from my Micromax A50 using xda developers app

Nope! nothing seems to work.
In CWM, when I press the option "reboot into recovery mode" .. The Mobile Set just nomally restarts..
It doesn't go to recovery mode that way. :/
One possibility that comes to my mind, is that, thought CWM tells me that it has successfully flashed the mobile set, it just might not have been done.. But I am not sure.. :/

Reflash cwm once more
Sent from my Micromax A50

I have reflashed it like so many times..
When I select the option to "Reboot into recovery in CWM" .. it just normally restarts
While, when I manually select "POWER+VolUP+VolDOWN" buttons.. It goes to the standard
android recovery system.

I think cwm recovery nt prsnt in ur phne
Sent from my Micromax A50

Is there anything extra I have to do for it ?
I have rooted my phone successfully, uninstalled all the bloatwares etc..
I have installed this CWM..
Is there anything else I can do ?

Off ur phne and prss vol up+menu+power and release it on seeing logo and see u can boot in cwm
Sent from my Micromax A50

Ahh last I got this..
Actually Droid3 can not simply work with CWM..
You then have to install this app
http://goo.gl/b4b6L
After installing the bootstrap in this application.. Click on "Reboot recovery" in this very same application..
However, I installed the ics4 update from file DROID3.5.7.905BolatedDeodexed.zip...
It said the install from zip is successful, but when I restarted the phone, It's same old 2.3.4 android !!! :/
Why is this ?

returning on stock

currently i am on cm 10.1 on p3100. i wanted to come back on stock rom. i have odin to flash it! but i have a doubt. How to factory reset, wipe dalvic before flashing through odin???

Siddharth121 said:
currently i am on cm 10.1 on p3100. i wanted to come back on stock rom. i have odin to flash it! but i have a doubt. How to factory reset, wipe dalvic before flashing through odin???
Click to expand...
Click to collapse
To do so, go to recover mode (POWER OFF+VOLUME UP+POWER BUTTON). Now, from here you can do the same.
Sent from my GT-P3100 using xda app-developers app

kunalthakur said:
To do so, go to recover mode (POWER OFF+VOLUME UP+POWER BUTTON). Now, from here you can do the same.
Sent from my GT-P3100 using xda app-developers app
Click to expand...
Click to collapse
no dude! recovery is for zip files! and stock roms are always in .tar.md5! they are ment to be flashed through pc. think u r new

Siddharth121 said:
no dude! recovery is for zip files! and stock roms are always in .tar.md5! they are ment to be flashed through pc. think u r new
Click to expand...
Click to collapse
Hey u asked on how to wipe data and cache etc. Not for flashing part. and i know that stock rom is flashed through odin on pc.
To get the right answer ask the right question!!!
Sent from my GT-P3100 using xda app-developers app

heheh! ok ok! ill explain more! in recovery, i will do factory reset! ok. then here is no option to turn off the device. it only has reboot option. after rebooting, the apps load itself, and a new cache, data is made. My problem still exists! :crying:

Download rom manager free from the play store and flash custom recovery from there and now try to boot in recovery mode. You should have cwm recovery. Now from here do the things u wanna do and then it should work. If u flash cwm recovery from rom manager, it will still raise ur flash counter so to reset it root and download triangle away. I have a tutorial for it. See my threads.
Sent from my GT-P3100 using xda app-developers app

Siddharth121 said:
heheh! ok ok! ill explain more! in recovery, i will do factory reset! ok. then here is no option to turn off the device. it only has reboot option. after rebooting, the apps load itself, and a new cache, data is made. My problem still exists! :crying:
Click to expand...
Click to collapse
Firstly if u have cm recovery installed.. Go to recovery, wipe data, cache n delvk cache, format Sd card n format system as well.. Then reboot the device.. If tab fails to boot, relax, go to download mode by pressing volume down key + power key, then volume up key to go into download mode n simply flash stock rom through odin.... Secondly.. Jus flash stock rom through odin.. If tab stuck at boot animation.. Go to recovery on the spot by pressing volume up key + power key.. N simply wipe data/factory reset.. Dats it..
¤ Help = Thanked ¤
Sent from Heaven

No reason to wipe before flashing stock via Odin because it resets EVERYTHING in the process.
Sent from my Nexus 4 using XDA Premium HD app

cwm recovery problem karbonn a 11

hi all,
i have rooted karbonn a11 and want to flash lewa rom which i have already downloaded now prob. is that it does not start in recovery. when i start the phone in recovery then it hangs and shows recovery mode. no further screen changes rather than continuous showing recovery mode. it only get off if i remove battery. so plz help me that how to start in recovery and flash lewa rom. i am new to flashing rom so plz explain everything clearly..
Sent from my A11 using xda app-developers app

What is your actual problem ur recovery mode not show or other
Sent from my GT-I9105 using XDA Premium 4 mobile app

twrp
You could look up twrp and see if its available for your phone. its much better than cwm . flashing that may solve your problem.

similar problem
I just flashed TPR with KT747 kernel (on Sprint GS3), ran into the issue a couple others had where it shuts off after boot animation and won't finish booting. I saw that the solution is wiping, clearing cache, reinstalling, clear cache again, boot. However, when I try to boot in recovery, it takes me to odin mode instead of cwm and the screen stays on "Downloading... Do not turn off target!!" So my 2 boot options at this point either freeze my phone or turn off before completing boot.
So I am unsure how to continue. Help would be greatly appreciated =)
EDIT: Ok, I think I solved my own problem. Sorry for the unnecessary post!

[Q] ICS Recovery Menu not working ,,,

I installed ICM on my Infuse but the Recovery Menu is not working.
All that is displayed is ...
GALAXY S
cyanogen (mod)
... and nothing else happens.
I had to remove the battery to get the phone to work again.
I tried to enter Recovery by selecting Reboot Recovery from the power button menu and also tried
holding down both Volume Up/Down and the Power buttons but they only
resulted in the GALAXY S screen.
Any advice?
Thanks
Carl

Not even using ROM MANAGER will get me to the Recovery Menu.
ROM MANAGER reports that my CWM is v2.5.1
Is there a security setting that prevents one from going to the Recovery Menu??
Did the key press sequence change from pressing both VOLUME UP/DOWN and then POWER?
Baffled.
Carl

that happens because you have to flash twice the ics rom, before opening new threads you should read the instructions.
Sent from my SGH-I997 using XDA Premium 4 mobile app

alexischino said:
that happens because you have to flash twice the ics rom, before opening new threads you should read the instructions.
Sent from my SGH-I997 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I thought I had flashed the ICS rom twice.
I followed these instructions:
Coming from Gingerbread (double flash):
1) download rom
2) reboot to recovery
3) wipe data/factory rest, wipe cache, wipe dalvic cache
4) flash rom
5) reboot
6) will get stuck at samsung logo or something
7) simutaniously hold power button, volume down, volume up until your phone reboots and you see the samsung logo - as soon as you see the samsung logo let go of buttons (but not your phone lol)
8) mount system
9) re-flash rom with no wipes
10) reboot and enjoy
Was a little confused about "8) mount system" -- should it have been mounted or unmounted?
Anyway to get CWM installed now?
Carl

cwmoser said:
I thought I had flashed the ICS rom twice.
I followed these instructions:
Coming from Gingerbread (double flash):
1) download rom
2) reboot to recovery
3) wipe data/factory rest, wipe cache, wipe dalvic cache
4) flash rom
5) reboot
6) will get stuck at samsung logo or something
7) simutaniously hold power button, volume down, volume up until your phone reboots and you see the samsung logo - as soon as you see the samsung logo let go of buttons (but not your phone lol)
8) mount system
9) re-flash rom with no wipes
10) reboot and enjoy
Was a little confused about "8) mount system" -- should it have been mounted or unmounted?
Anyway to get CWM installed now?
Carl
Click to expand...
Click to collapse
This is how you should do it https://www.youtube.com/watch?v=ndC39t1AE-k&feature=youtube_gdata_player if you are having problems do a fresh flash
Sent from my SGH-I997 using XDA Premium 4 mobile app

alexischino said:
This is how you should do it https://www.youtube.com/watch?v=ndC39t1AE-k&feature=youtube_gdata_player if you are having problems do a fresh flash
Sent from my SGH-I997 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I thought I followed the video and instrutions just like shown.
Anyway, to reflash I don't have a Recovery Menu. So, do I set the phone
to Download Mode and use Odin?
If so, in Odin do I use the PDA button to select the ICS Rom?
Thanks
Carl

cwmoser said:
I thought I followed the video and instrutions just like shown.
Anyway, to reflash I don't have a Recovery Menu. So, do I set the phone
to Download Mode and use Odin?
If so, in Odin do I use the PDA button to select the ICS Rom?
Thanks
Carl
Click to expand...
Click to collapse
I think you should go back to gingerbread using odin and then flash the ics rom this way you will have a clean installation.
Sent from my SGH-I997 using XDA Premium 4 mobile app

alexischino said:
I think you should go back to gingerbread using odin and then flash the ics rom this way you you will have a clean installation.
Sent from my SGH-I997 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Took your advice and started all over.
Was able to get "BeanStalk" Jelly Bean OS installed on my Samsung Infuse.
I went back to installing Gingerbread using PIT, PDA, and PHONE files using ODIN3.
Then installed Gingerbread with CWM using ODIN3.
Followed Video carefully and got ICS installed with a working CWM recovery menu.
Found the "BeanStalk" version of JellyBean and got it installed.
Had some trouble with the Launchers (Holo, Nova, and Trebuchet). They continually
crashed with "Unfortunately, xxx Launcher has stopped".
Every action caused this Launcher to crash.
Somehow I got it to go away.
Thanks much for you assistance.
Been a real learning experience delving into this technology and its arcane terminology.
Still, a rewarding effort.
Thanks again,
Carl
(Jelly Bean on my Samsung Infuse)