Hello,
here is my first recovery for this phone,
I've ported it from the last cm12.1 release and put it into an
flashable img.
Unpack it and install it with:
Code:
fastboot flash recovery recovery.img
boot into it by holdung vol- + power until phone vibrates,
then release power.
UPDATE
Now there is also TWRP recovery as img file which you can flash on you d2203
recovery partition. It should be fully working and if installing of any zip file fails
you most likely just have to delete first line in updater-script.
I tried to build TWRP from source and got everything working but learning the
recovery where the boot partition is(I have no idea why, I realy tried a lot od stuff
but it just won't recognize it), so I used @vinay recovery ramdisk so a lot of thanks
goes to him.
Install and acces the recovery like cyanogen recovery.
I installed the recovery with the new bootloader and everything works
Thanks
work in xperia e4g?
Wysyłane z mojego WT19i za pomocą Tapatalk 2
added twrp
berni987654321 said:
added twrp
Click to expand...
Click to collapse
Test the recovery tomorrow
Thanks for your work
berni987654321 said:
added twrp
Click to expand...
Click to collapse
The recovery TWRP works fine but when i install the rom cm12.1 I have this error in executing updater binary zip that I do not receive with recovery cyano
entony80 said:
The recovery TWRP works fine but when i install the rom cm12.1 I have this error in executing updater binary zip that I do not receive with recovery cyano
Click to expand...
Click to collapse
Please read the first post carefully.
You have to delete first line in updater-script
Sent from my Xperia E3 (AOSP) using XDA Free mobile app
berni987654321 said:
Please read the first post carefully.
You have to delete first line in updater-script
Sent from my Xperia E3 (AOSP) using XDA Free mobile app
Click to expand...
Click to collapse
sorry I had not read this particular, I'll try and let you know
---------- Post added at 11:46 PM ---------- Previous post was at 11:02 PM ----------
berni987654321 said:
Please read the first post carefully.
You have to delete first line in updater-script
Sent from my Xperia E3 (AOSP) using XDA Free mobile app
Click to expand...
Click to collapse
removing first line : assert(getprop("ro.product.device") == "D2203" ||
He is not working for me even removing the first row. Try putting the updater-script file being edited by you so so that I can try
I Flash the TWRP-2203 recovery but my ****ing E3 only enters the TWRP without even pressing the volume keys! E3 restart and re-enters the recovery without me doing anything!
Does not continue starting, just enter the recovery!
pedroj666 said:
I Flash the TWRP-2203 recovery but my ****ing E3 only enters the TWRP without even pressing the volume keys! E3 restart and re-enters the recovery without me doing anything!
Does not continue starting, just enter the recovery!
Click to expand...
Click to collapse
i think you flashed recovery in your boot partation.
In the previous attempt I used the "Flash Tool" to flash the recovery in E3, which gave the error you saw above.
Now I used the cmd to send the recovery but now this happens!
Something about not having the partition X.
pedroj666 said:
In the previous attempt I used the "Flash Tool" to flash the recovery in E3, which gave the error you saw above.
Now I used the cmd to send the recovery but now this happens!
Something about not having the partition X.
Click to expand...
Click to collapse
You need new bootloader with recovery to do this.
Sent from my Xperia E3 using XDA Free mobile app
pedroj666 said:
In the previous attempt I used the "Flash Tool" to flash the recovery in E3, which gave the error you saw above.
Now I used the cmd to send the recovery but now this happens!
Something about not having the partition X.
Click to expand...
Click to collapse
Install open device BL from here:
http://forum.xda-developers.com/showthread.php?t=3136514
Sent from my Xperia E3 (AOSP) using XDA Free mobile app
berni987654321 said:
Install open device BL from here:
http://forum.xda-developers.com/showthread.php?t=3136514
Sent from my Xperia E3 (AOSP) using XDA Free mobile app
Click to expand...
Click to collapse
I Flash "open device BL" and then TWRP-2203 but does not work!
My E3 only vibrates when I press the power button. Nothing appears on the monitor and I have to turn it off with a toothpick LOL!
pedroj666 said:
I Flash "open device BL" and then TWRP-2203 but does not work!
My E3 only vibrates when I press the power button. Nothing appears on the monitor and I have to turn it off with a toothpick LOL!
Click to expand...
Click to collapse
hold power button and volume down, after vibration leaves the power button while holding the button down, until the screen turns on ... He has to work if the steps have been performed correctly
entony80 said:
hold power button and volume down, after vibration leaves the power button while holding the button down, until the screen turns on ... He has to work if the steps have been performed correctly
Click to expand...
Click to collapse
I did what I say and already started.
But again only boots for recovery mode!
could you make one for cwm?
pyrall said:
could you make one for cwm?
Click to expand...
Click to collapse
I could, but there is a probleme with the cwm source. It is just availaible for 4.3 Android and I dont have that much time to Download the whole 4.3 source code.
Sent from my Xperia E3 using XDA Free mobile app
Related
Hello,
I was trying to install CM10 mod.Everything worked fine but I misjudged something.We had to place .zip file itself but I extracted it and then wiped all data and cache.Now I am unable to place it again.I don't know how to place the zip file in sdcard again.Please help me urgently...
Thanks,
Centurian
If you can enter cwm, mount USB, then use this app to push file to /sdcard
http://forum.xda-developers.com/showthread.php?t=1599332
Sent from my ST27i
that worked now...I sent the zip file to sdcard but now while flashing it aborts everytime....Error Status 7 comes...
Please suggest something..
Thanks
Mr.Centurian said:
that worked now...I sent the zip file to sdcard but now while flashing it aborts everytime....Error Status 7 comes...
Please suggest something..
Thanks
Click to expand...
Click to collapse
Ya happened to me too reboot into recovery, try again, if not working reboot recovery again or battery pull and enter recovery, it worked after a couple of tries for me.
Sent from my ST27i
Hey,It flashed now..I did from FXP152 tapioca...
But now,when rebooting it there is no reponse...The screen is completely dead,no response from anything...What should I do next??
Mr.Centurian said:
Hey,It flashed now..I did from FXP152 tapioca...
But now,when rebooting it there is no reponse...The screen is completely dead,no response from anything...What should I do next??
Click to expand...
Click to collapse
Oh dude are you serious? Why aren't you following the development thread (or even this q&a section) ?
It's been told way too many times fxp152 boot.img is bugged and not bootable
Now download fxp 203 ( or 204 but better leave testing to others and read bugs before flashing)
Fastboot 203 boot.img and same instructions as above.
Sent from my ST27i
But my phone is blacked out...no response...What should I do first to make it working to recovery mode??
It can still enter fastboot mode. Power + vol up when phone is switched off. Or remove battery, open flashtool on pc, press vol up and plug USB
Sent from my ST27i
thankss....it worked!!!
thanks alot
Hi,
I'm having some trouble installing clockworkmod on my Tipo as per this thread - http://forum.xda-developers.com/showthread.php?t=2003069
I followed all the instructions, but when I restart and continually press the volume down button when Sony appears the phone just boots as normal. Also most of the widgets on my homescreen no longer work (no real issue there I can just reinstall them). I then downloaded Rom Manager and it tells me that my current recovery is ClockworkMod 5.x.x.x. I just want to know if the clockworkmod is actually on my phone and if so why doesn't it work when I use the volume down button method? (I've run the install.bat file twice now with the same results). My phone is rooted and is build 11.0.a.4.22
Anyone help?
Thanks:good:
Downgrade to .1.16
Sent from my ST27i
satan89 said:
Downgrade to .1.16
Sent from my ST27i
Click to expand...
Click to collapse
do you mean .0.16?
connect your phone with debugging on, run the install.bat again, copy all of its contents when you run it with phone connected.
delzep said:
Hi,
I'm having some trouble installing clockworkmod on my Tipo as per this thread - http://forum.xda-developers.com/showthread.php?t=2003069
I followed all the instructions, but when I restart and continually press the volume down button when Sony appears the phone just boots as normal. Also most of the widgets on my homescreen no longer work (no real issue there I can just reinstall them). I then downloaded Rom Manager and it tells me that my current recovery is ClockworkMod 5.x.x.x. I just want to know if the clockworkmod is actually on my phone and if so why doesn't it work when I use the volume down button method? (I've run the install.bat file twice now with the same results). My phone is rooted and is build 11.0.a.4.22
Anyone help?
Thanks:good:
Click to expand...
Click to collapse
Switch off ur phone connect to charger when Sony logo come continuously press volume down:fingers-crossed:
---------- Post added at 08:11 AM ---------- Previous post was at 08:09 AM ----------
satan89 said:
Downgrade to .1.16
Sent from my ST27i
Click to expand...
Click to collapse
No need to downgrade it is working on 4.22
finally got it to work by downgrading...thanks guys:good:
After install CM 10 via flashtool on my xperia miro my phone is no longer booting even Sony logo. And my pc didn't recognize it......
Help!
Sent from my Xperia Ray using xda app-developers app
borakx said:
After install CM 10 via flashtool on my xperia miro my phone is no longer booting even Sony logo. And my pc didn't recognize it......
Help!
Click to expand...
Click to collapse
CM10 via Flashtool???
as far as i know to install CM10 :
1. flash boot.img ( taken from CM10 zip file )
2. enter CWM on the device
3. clear cache,dalvik
4. install CM10 zip file
5. fix permissions
6. reboot device
like nughroz said, you cannot use flashtool to install CM10. Use his steps if you need CM10 anyways, else if you want to revert back to Xperia stock, then
1. Download the latest Miro firmware
2. shutdown mobile, disconnect from PC.
3. hold Vol- button and reconnect to PC, geen LED should be lit
4. flash the new Miro firmware through flashtool
Yes, before using CM10, you should flash img.boot file that available in the CM10 packages. Extract it, flash img.boot, then flash the rom. If you wanna back to ICS, then flash the stock firmware. And the most important thing before installing CM10, you SHOULD unlock your bootloader. Correct me if i wrong :highfive:
I cant even boot my phone up
Sent from my Xperia Ray using xda app-developers app
borakx said:
I cant even boot my phone up
Sent from my Xperia Ray using xda app-developers app
Click to expand...
Click to collapse
1. tell us what you have done, i mean your flashing steps???
2. what do you want?install CM or stock?
Try to change the battery, then flash using another battery
FajarMF28 said:
Try to change the battery, then flash using another battery
Click to expand...
Click to collapse
At this point, i need to buy a new Xperia Miro's Battery?
No, you can try your friend's battery on your phone
Sorry, i mean when i flash the kernel that provide in the cm10zip (i've flash the kernel via flashtool) after flash i try to boot my phone up by holding the power button but it wont boot just one vibrate and nothing happen!
borakx said:
Sorry, i mean when i flash the kernel that provide in the cm10zip (i've flash the kernel via flashtool) after flash i try to boot my phone up by holding the power button but it wont boot just one vibrate and nothing happen!
Click to expand...
Click to collapse
nah, after flashing CM kernel ( boot.img ), install CM zip file from CWM,.
* : on my phone ( Xperia J ), entering CWM is simply by pressing vol+/- press the power button.
watch this video on youtube bro. :highfive:
nughroz said:
nah, after flashing CM kernel ( boot.img ), install CM zip file from CWM,.
* : on my phone ( Xperia J ), entering CWM is simply by pressing vol+/- press the power button.
watch this video on youtube bro. :highfive:
Click to expand...
Click to collapse
i cant enter CWM ... coz my phone cant boot
borakx said:
i cant enter CWM ... coz my phone cant boot
Click to expand...
Click to collapse
go to this thread.
read carefully this section "Recovery boot is triggered by pressing any of the volume keys during bootup while the notification bar lights up."
:angel: :angel: :angel:
This recovey is suitable on both D838 and F350. It works very successfully, but only English is supported.
Based ANZHI released one key recovery tool making, thanks!
Step:
1. Unzip and run ONEkeyRecovery
2. Enter "1" in the dialog box and enter
3. Open adb according to the dialog box, and ensure that the phone is rooted
4. After pressing enter, the phone will enter TWRP Recovey automatically
5. After entering the recovery, mobile touch-screen operation is not yet available, press the power button to lock the screen and wait for the black screen then open again. The screen is now available.
link：http://pan.baidu.com/s/1hq9VJPM
password：8s7z
Original post: http://bbs.sonyue.com/forum.php?mod=viewthread&tid=94823&extra=page=1&mobile=2
how to enter to recovery without computer?
sergey1977 said:
how to enter to recovery without computer?
Click to expand...
Click to collapse
The recovery will be updated later.
Any one try that recovery on d838 ?
Sent from my LG-D838 using XDA Free mobile app
Gonzaman said:
Any one try that recovery on d838 ?
Sent from my LG-D838 using XDA Free mobile app
Click to expand...
Click to collapse
i try. it runs only from comp. each time u want start recovery u need conect phone to comp and start ONEkeyRecovery.
But recovery works? read the memory card? Recovery and backup works ?
Sent from my LG-D838 using XDA Free mobile app
Gonzaman said:
But recovery works? read the memory card? Recovery and backup works ?
Sent from my LG-D838 using XDA Free mobile app
Click to expand...
Click to collapse
i did backup. but didnt try to restore.
Philz toch recovery
http://pan.baidu.com/share/link?shareid=1877196686&uk=4111124181
Source: http://bbs.sonyue.com/thread-95756-1-1.html
its need computer too?
yes .
Good evening. I'm in some problems with my device. The situation is this:
I had the TWRP Recovery installed in my phone and wanted to install another ROM. It said me that was a wrong image, so I tried with another ROM and same message. The thing is that in the past I installed both ROMs and the checksum was the same, so both ROMS were OK.
I decided to flash another recovery and install it in the place of TWRP (the new one was CWM Recovery). When I installed it, y phone rebooted and the Sony logo of the startup was gone. In it's place was the TWRP logo and it rebooted again, and again. The TWRP Logo screen lasts at least 1 second or less and it reboots again.
My question is: is there anyway to recover my cellphone? I had access to the bootloader and the files inside in Ubuntu and Ubuntu recognized the device. I no longer have Ubuntu, I have a Windows 8.1. What can I do? or What should I do? Thanks for your attention.
Steve6678 said:
Good evening. I'm in some problems with my device. The situation is this:
I had the TWRP Recovery installed in my phone and wanted to install another ROM. It said me that was a wrong image, so I tried with another ROM and same message. The thing is that in the past I installed both ROMs and the checksum was the same, so both ROMS were OK.
I decided to flash another recovery and install it in the place of TWRP (the new one was CWM Recovery). When I installed it, y phone rebooted and the Sony logo of the startup was gone. In it's place was the TWRP logo and it rebooted again, and again. The TWRP Logo screen lasts at least 1 second or less and it reboots again.
My question is: is there anyway to recover my cellphone? I had access to the bootloader and the files inside in Ubuntu and Ubuntu recognized the device. I no longer have Ubuntu, I have a Windows 8.1. What can I do? or What should I do? Thanks for your attention.
Click to expand...
Click to collapse
best way would be to flash stockrom
google for "xperia flashtool" and download it
then google for C2105 (or C2104 or S36H) stock ftf and download
rest will be explained by flashtool himself
Sent from my Xperia T using XDA Free mobile app
Thanks
SdtBarbarossa said:
best way would be to flash stockrom
google for "xperia flashtool" and download it
then google for C2105 (or C2104 or S36H) stock ftf and download
rest will be explained by flashtool himself
Sent from my Xperia T using XDA Free mobile app
Click to expand...
Click to collapse
Thanks for your quick answer, I'm going to do that right away I have the flashtool, only need the stock ftf.
Steve6678 said:
Thanks for your quick answer, I'm going to do that right away I have the flashtool, only need the stock ftf.
Click to expand...
Click to collapse
tell me if you got any problem
Sent from my C2105 using XDA Free mobile app
Done! Thanks
SdtBarbarossa said:
tell me if you got any problem
Sent from my C2105 using XDA Free mobile app
Click to expand...
Click to collapse
I Just repaired it. It was a little bit difficult to access flash mode, I needed both adb and fastboot and be like:
[start]
adb reboot bootloader
fastboot reboot
*Press volume up*
*Green light and flash mode? if yes: continue; else: return to start*
*Entering flash mode*
*Flash FTF*
*Success? if yes: continue; else: return to start*
*Flashed*
*Jump meanwhile smile*
[end]
Thanks for your support, my Xperia is now in excelent condition.