Database Info

TWRP for ics port could not boot to recovery...need help please....

I already try to reflash for almost 10 times and each and every time was unsuccessful to make the twrp working on my device...
anybody has any idea what went wrong?
i flash the ics port from xbsall currently using V21A baseband and root succesfuly using the guide from the development thread.
however once i install the p940 recovery and granted superuser it could never boot to recovery.
i did make the twrp successfully boot to recover and make a backup 2 days ago. but because i flash the wrong baseband and messed up with my imei i decided to reflash all over again.
and tough luck it never reboot to recovery ever since.
please help... i'm dying to try xbsall newest room with acid sound....

I am in the same situatiom.
If someone can provide alternative or manual way it will be great.

You habe to put you device in fastboot mode with omap4tools and type the fastboot.exe flash recovery \path\to\stockicsrecovery.img
Sent from my LG-P920 using xda app-developers app

How can I do that? Could you please explain it to me step by step? I have the omap driver but don't know anything about fast boot.
Sent from my LG-SU760 using xda app-developers app

berni987654321 said:
You habe to put you device in fastboot mode with omap4tools and type the fastboot.exe flash recovery \path\to\stockicsrecovery.img
Sent from my LG-P920 using xda app-developers app
Click to expand...
Click to collapse
ok, i did some research and found how to do the fastboot.
i can go into the fastboot mode.
but what should i type?
once i type fastboot.exe there are a lot of command
should i type" flash <recovery>\path\to\stockicsrecovery.img" ????
please show me how to do it.
thanks

Type:
"fastboot.exe flash recovery C:\path\to\recovery.img"
Sent from my LG-SU760 using xda app-developers app

i'm sorry i'm such a noob but where can i download the recovery.img?
i had twrp running a couple of days ago before i accidently messed my imei.
i did a twrp backup with twrp booting to recovery successfully.
is there any way i could restore the backup using fastboot?
thanks for your help.
i'm desperately try to make twrp work in my phone. just don't know what went wrong. i installed the p 940 recovery.apk and install twrm and granted the superuser permission.
but when i reboot it normally reboot to the system and not recovery.... :crying:
edit:
i found your thread regarding the twrp berni...it is for GB right? so back to square one. where can i find the ics recovery image? thanks

Did u try holding volume down while booting?
Sent from my LG-SU760 using xda app-developers app

Forget flashing Recovery partition if using ICS.
Specific TWRP/CWM recovery uses the 2nd init method and has nothing to do with recovery partition.

I have the same problem!
the installation of the .zip-file takes 2 sec.
it isn't normal for a size of 429 mb.
what's the problem

you can use the app that you used to install recovery to go in recovery mode,
3d+vol down+power doesnt work on me.

xueJ said:
you can use the app that you used to install recovery to go in recovery mode,
3d+vol down+power doesnt work on me.
Click to expand...
Click to collapse
Correct key combination for twrp in ICS is Vol- and Power
4.0.4 SuperG with ACiD Audio LG-P920

stuck on lg logo

Wondering if anyone could point me in the right direction. I was trying to go back to stock to flash new twrp but when i wiped through advanced it wiped my phone completely. I wasnt able to get back on the Rom and now I can only get back to twrp by doing the hard factory reset. what is the best way to get my phone back? it was twrp 2.3.2 if it helps

This is what I see when I try to get into download mode
Sent from my Transformer TF101 using XDA Premium 4 mobile app

Dude that is download mode
Sent from my LG-LS980 using xda app-developers app
---------- Post added at 08:43 PM ---------- Previous post was at 08:36 PM ----------
Since your phone can not boot you must use that mode to go back to your original firmware, that I can not help you with because I have a sprint variant
Sent from my LG-LS980 using xda app-developers app

if you have custom recovery then use adb sideload and push rom of choice and that's it but if u want to go back to stock then search for threads in xda which clearly describe them.
Sent from my LG-D800 using xda app-developers app

clago87 said:
This is what I see when I try to get into download mode
Sent from my Transformer TF101 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Use this tutorial http://forum.xda-developers.com/showthread.php?t=2663369 is very easy. Or you can push the rom by RECOVERY
adb push D800_Stock_KK.zip/data/
adb push UPDATE-SuperSU-v1.93.zip/data/
Good Luck

thank you my pc is not recognizing my g2 so I am going to backtrack reinstall the drivers to see if it makes a difference

clago87 said:
thank you my pc is not recognizing my g2 so I am going to backtrack reinstall the drivers to see if it makes a difference
Click to expand...
Click to collapse
I think the easiest way is to restore from pc, just to be able to recognize your phone to your computer

my phone stuck in cwm loop
Mattx94 said:
I think the easiest way is to restore from pc, just to be able to recognize your phone to your computer
Click to expand...
Click to collapse
Hey guys, today my phone downloaded the update from at&t and to get rid of notification to install I selected install later. Well it did just that. Now I am in a bootlop of cwm and no matter what I do can I download to "download mode" or boot up. Also, I have tried a ton of new drivers and added adb to my windows 8.1 however when under command prompt i type ...adb devices...it doesnt list any device. I cannot sideload anything without the phone being recognized.
Please help!!!

Custom recovery
shades333 said:
Hey guys, today my phone downloaded the update from at&t and to get rid of notification to install I selected install later. Well it did just that. Now I am in a bootlop of cwm and no matter what I do can I download to "download mode" or boot up. Also, I have tried a ton of new drivers and added adb to my windows 8.1 however when under command prompt i type ...adb devices...it doesnt list any device. I cannot sideload anything without the phone being recognized.
Please help!!!
Click to expand...
Click to collapse
Dude, it looks like you have soft-bricked your phone. Do you have any custom recoveries installed? Are you running CM or any stock ROMS (non-AT&T)?
I ran into a boot loop earlier. Luckily I had custom recovery installed. Try these steps to get into custom recovery:
Code:
Turn your phone off.
Press volume down and power button until the LG logo comes on screen
Let go of both buttons
Hold the volume down and power buttons again until you see the "hard reset screen"
Press power once and then power again to confirm. The screen says it will reset your device but it will not as long as you have a custom recovery installed.
Your custom recovery should appear on screen.

I was able to fix it thankfully. Just had to reinstall adb from a previous file. I followed this thread
http://forum.xda-developers.com/showthread.php?t=2451696
Sent from my LG-D800 using XDA Premium 4 mobile app

Boot loop problem after update firmware from xposed.

I used xposed for lot of time and also working nicely. Just two day ago I was updated firmware version 2.7 and after reboot my take lot of time for boot. Same thing repeated after holding power button. I also try to start recovery mode unfortunately it's not working. Somebody please help me.
Sent from my Micromax A110Q using XDA Free mobile app

ajoyshil said:
I used xposed for lot of time and also working nicely. Just two day ago I was updated firmware version 2.7 and after reboot my take lot of time for boot. Same thing repeated after holding power button. I also try to start recovery mode unfortunately it's not working. Somebody please help me.
Sent from my Micromax A110Q using XDA Free mobile app
Click to expand...
Click to collapse
so you cant access recovery?

Exactly I can't access recovery and also take lot of time to startup once again.

ajoyshil said:
Exactly I can't access recovery and also take lot of time to startup once again.
Click to expand...
Click to collapse
that happens with xposed.... it will take more time to boot..
install custom recovery using mobile uncle tools.

Already try this one but nothing to change.

ajoyshil said:
Already try this one but nothing to change.
Click to expand...
Click to collapse
what happens when you go to mobile uncle and tap on go to recovery?

Install the mobile uncle tool chose the recovery update then confirm the recovery.img file now reboot. After that my phone take 5 hours to startup, I mean boot loop. Can I factory reset from my phone setting?
Does it the same thing what I doo in recovery mode?

ajoyshil said:
Install the mobile uncle tool chose the recovery update then confirm the recovery.img file now reboot. After that my phone take 5 hours to startup, I mean boot loop. Can I factory reset from my phone setting?
Does it the same thing what I doo in recovery mode?
Click to expand...
Click to collapse
which recovery did you update?
strange.... did it start or not? make up your mind.. :|

[Q] Resurrection of dead Xperia L

Good evening. I'm in some problems with my device. The situation is this:
I had the TWRP Recovery installed in my phone and wanted to install another ROM. It said me that was a wrong image, so I tried with another ROM and same message. The thing is that in the past I installed both ROMs and the checksum was the same, so both ROMS were OK.
I decided to flash another recovery and install it in the place of TWRP (the new one was CWM Recovery). When I installed it, y phone rebooted and the Sony logo of the startup was gone. In it's place was the TWRP logo and it rebooted again, and again. The TWRP Logo screen lasts at least 1 second or less and it reboots again.
My question is: is there anyway to recover my cellphone? I had access to the bootloader and the files inside in Ubuntu and Ubuntu recognized the device. I no longer have Ubuntu, I have a Windows 8.1. What can I do? or What should I do? Thanks for your attention.

Steve6678 said:
Good evening. I'm in some problems with my device. The situation is this:
I had the TWRP Recovery installed in my phone and wanted to install another ROM. It said me that was a wrong image, so I tried with another ROM and same message. The thing is that in the past I installed both ROMs and the checksum was the same, so both ROMS were OK.
I decided to flash another recovery and install it in the place of TWRP (the new one was CWM Recovery). When I installed it, y phone rebooted and the Sony logo of the startup was gone. In it's place was the TWRP logo and it rebooted again, and again. The TWRP Logo screen lasts at least 1 second or less and it reboots again.
My question is: is there anyway to recover my cellphone? I had access to the bootloader and the files inside in Ubuntu and Ubuntu recognized the device. I no longer have Ubuntu, I have a Windows 8.1. What can I do? or What should I do? Thanks for your attention.
Click to expand...
Click to collapse
best way would be to flash stockrom
google for "xperia flashtool" and download it
then google for C2105 (or C2104 or S36H) stock ftf and download
rest will be explained by flashtool himself
Sent from my Xperia T using XDA Free mobile app

Thanks
SdtBarbarossa said:
best way would be to flash stockrom
google for "xperia flashtool" and download it
then google for C2105 (or C2104 or S36H) stock ftf and download
rest will be explained by flashtool himself
Sent from my Xperia T using XDA Free mobile app
Click to expand...
Click to collapse
Thanks for your quick answer, I'm going to do that right away I have the flashtool, only need the stock ftf.

Steve6678 said:
Thanks for your quick answer, I'm going to do that right away I have the flashtool, only need the stock ftf.
Click to expand...
Click to collapse
tell me if you got any problem
Sent from my C2105 using XDA Free mobile app

Done! Thanks
SdtBarbarossa said:
tell me if you got any problem
Sent from my C2105 using XDA Free mobile app
Click to expand...
Click to collapse
I Just repaired it. It was a little bit difficult to access flash mode, I needed both adb and fastboot and be like:
[start]
adb reboot bootloader
fastboot reboot
*Press volume up*
*Green light and flash mode? if yes: continue; else: return to start*
*Entering flash mode*
*Flash FTF*
*Success? if yes: continue; else: return to start*
*Flashed*
*Jump meanwhile smile*
[end]
Thanks for your support, my Xperia is now in excelent condition.

[IMG]TWRP and CyanogenRecovery for new BL[D2203]

Hello,
here is my first recovery for this phone,
I've ported it from the last cm12.1 release and put it into an
flashable img.
Unpack it and install it with:
Code:
fastboot flash recovery recovery.img
boot into it by holdung vol- + power until phone vibrates,
then release power.
UPDATE
Now there is also TWRP recovery as img file which you can flash on you d2203
recovery partition. It should be fully working and if installing of any zip file fails
you most likely just have to delete first line in updater-script.
I tried to build TWRP from source and got everything working but learning the
recovery where the boot partition is(I have no idea why, I realy tried a lot od stuff
but it just won't recognize it), so I used @vinay recovery ramdisk so a lot of thanks
goes to him.
Install and acces the recovery like cyanogen recovery.

I installed the recovery with the new bootloader and everything works
Thanks

work in xperia e4g?
Wysyłane z mojego WT19i za pomocą Tapatalk 2

added twrp

berni987654321 said:
added twrp
Click to expand...
Click to collapse
Test the recovery tomorrow
Thanks for your work

berni987654321 said:
added twrp
Click to expand...
Click to collapse
The recovery TWRP works fine but when i install the rom cm12.1 I have this error in executing updater binary zip that I do not receive with recovery cyano

entony80 said:
The recovery TWRP works fine but when i install the rom cm12.1 I have this error in executing updater binary zip that I do not receive with recovery cyano
Click to expand...
Click to collapse
Please read the first post carefully.
You have to delete first line in updater-script
Sent from my Xperia E3 (AOSP) using XDA Free mobile app

berni987654321 said:
Please read the first post carefully.
You have to delete first line in updater-script
Sent from my Xperia E3 (AOSP) using XDA Free mobile app
Click to expand...
Click to collapse
sorry I had not read this particular, I'll try and let you know
---------- Post added at 11:46 PM ---------- Previous post was at 11:02 PM ----------
berni987654321 said:
Please read the first post carefully.
You have to delete first line in updater-script
Sent from my Xperia E3 (AOSP) using XDA Free mobile app
Click to expand...
Click to collapse
removing first line : assert(getprop("ro.product.device") == "D2203" ||
He is not working for me even removing the first row. Try putting the updater-script file being edited by you so so that I can try

I Flash the TWRP-2203 recovery but my ****ing E3 only enters the TWRP without even pressing the volume keys! E3 restart and re-enters the recovery without me doing anything!
Does not continue starting, just enter the recovery!

pedroj666 said:
I Flash the TWRP-2203 recovery but my ****ing E3 only enters the TWRP without even pressing the volume keys! E3 restart and re-enters the recovery without me doing anything!
Does not continue starting, just enter the recovery!
Click to expand...
Click to collapse
i think you flashed recovery in your boot partation.

In the previous attempt I used the "Flash Tool" to flash the recovery in E3, which gave the error you saw above.
Now I used the cmd to send the recovery but now this happens!
Something about not having the partition X.

pedroj666 said:
In the previous attempt I used the "Flash Tool" to flash the recovery in E3, which gave the error you saw above.
Now I used the cmd to send the recovery but now this happens!
Something about not having the partition X.
Click to expand...
Click to collapse
You need new bootloader with recovery to do this.
Sent from my Xperia E3 using XDA Free mobile app

pedroj666 said:
In the previous attempt I used the "Flash Tool" to flash the recovery in E3, which gave the error you saw above.
Now I used the cmd to send the recovery but now this happens!
Something about not having the partition X.
Click to expand...
Click to collapse
Install open device BL from here:
http://forum.xda-developers.com/showthread.php?t=3136514
Sent from my Xperia E3 (AOSP) using XDA Free mobile app

berni987654321 said:
Install open device BL from here:
http://forum.xda-developers.com/showthread.php?t=3136514
Sent from my Xperia E3 (AOSP) using XDA Free mobile app
Click to expand...
Click to collapse
I Flash "open device BL" and then TWRP-2203 but does not work!
My E3 only vibrates when I press the power button. Nothing appears on the monitor and I have to turn it off with a toothpick LOL!

pedroj666 said:
I Flash "open device BL" and then TWRP-2203 but does not work!
My E3 only vibrates when I press the power button. Nothing appears on the monitor and I have to turn it off with a toothpick LOL!
Click to expand...
Click to collapse
hold power button and volume down, after vibration leaves the power button while holding the button down, until the screen turns on ... He has to work if the steps have been performed correctly

entony80 said:
hold power button and volume down, after vibration leaves the power button while holding the button down, until the screen turns on ... He has to work if the steps have been performed correctly
Click to expand...
Click to collapse
I did what I say and already started.
But again only boots for recovery mode!

could you make one for cwm?

pyrall said:
could you make one for cwm?
Click to expand...
Click to collapse
I could, but there is a probleme with the cwm source. It is just availaible for 4.3 Android and I dont have that much time to Download the whole 4.3 source code.
Sent from my Xperia E3 using XDA Free mobile app