hello friends ,
my Moto G does not finish booting after the installation cynogenmod . It keeps rebooting all the time.
I installed it first from the Settings menu and then tried it again with an installation from recovery CWM v6.0.4.6 It always just shows the CM logo with the rotating arrow i wait 2 min. after 2 hours but rotatin arrow rounding continuous phone does not start help me plz guys
now what can i do?
proceser what i do?
first install cwm
after
wipe data factory reset
wipe cache partion
wipe dalvik cache
after install from sd
instalation completed but
after roboot cm logo is rotating continue
after i change second rom but same problem
i use cabon rom but carbon logo rotate continue
i tryied 3 types of rom but problem not solved plz suggest me
Did you wipe system as well?
rashmin94 said:
hello friends ,
my Moto G does not finish booting after the installation cynogenmod . It keeps rebooting all the time.
I installed it first from the Settings menu and then tried it again with an installation from recovery CWM v6.0.4.6 It always just shows the CM logo with the rotating arrow i wait 2 min. after 2 hours but rotatin arrow rounding continuous phone does not start help me plz guys
now what can i do?
proceser what i do?
first install cwm
after
wipe data factory reset
wipe cache partion
wipe dalvik cache
after install from sd
instalation completed but
after roboot cm logo is rotating continue
after i change second rom but same problem
i use cabon rom but carbon logo rotate continue
i tryied 3 types of rom but problem not solved plz suggest me
Click to expand...
Click to collapse
Carbon Rom has just lead to trouble as far as i can see. You will need to flash the firmware follow this guide: http://forum.xda-developers.com/showthread.php?t=2542219 and remember to input the fastboot commands MANUALLY
Hello guys, i have Moto G 1st Gen. Indian version (XT1033) running android 5.0.2... Yesterday i rooted my moto g by unlocking bootloader and flashing TWRP 2.8.6.0-XT1032 & SuperSU 2.45... During the process there was some error (like general unlock failure, wipe partition failure etc). I ignored them and continued... It was booted normally... Then i installed Root Checker and confirmed that root has been done successfully....
After that i tried to make a Nandroid backup using TWRP. Message popped up saying that backup is successful.. Then i pressed reboot system. Then it went into bootloop (stuck at bootloader unlocked warning message). :crying:
When this happened, i thought to flash recovery again and flash stock rom. By the time i downloaded stock rom, the phone discharged completely. Now the phone is not charging I have tried using usb charging through pc and using socket charger, but it's stuck at 0%... (I have kept it for hours) Sometime it try to boot and bootloader unlocked warning appears and stuck there.. after sometime it again go into battery charging logo with 0% and then repeat the process again.. When i try using usb cable, the same cycle continues with frequent connecting and disconnecting... :crying:
What to do now ? I guess it's not possible to flash stock rom without any charge... How to charge my phone ? What other option(s) do i have ?
PS : Sorry if this has been already discussed.
savvy54 said:
Hello guys, i have Moto G 1st Gen. Indian version (XT1033) running android 5.0.2... Yesterday i rooted my moto g by unlocking bootloader and flashing TWRP 2.8.6.0-XT1032 & SuperSU 2.45... During the process there was some error (like general unlock failure, wipe partition failure etc). I ignored them and continued... It was booted normally... Then i installed Root Checker and confirmed that root has been done successfully....
After that i tried to make a Nandroid backup using TWRP. Message popped up saying that backup is successful.. Then i pressed reboot system. Then it went into bootloop (stuck at bootloader unlocked warning message). :crying:
When this happened, i thought to flash recovery again and flash stock rom. By the time i downloaded stock rom, the phone discharged completely. Now the phone is not charging I have tried using usb charging through pc and using socket charger, but it's stuck at 0%... (I have kept it for hours) Sometime it try to boot and bootloader unlocked warning appears and stuck there.. after sometime it again go into battery charging logo with 0% and then repeat the process again.. When i try using usb cable, the same cycle continues with frequent connecting and disconnecting... :crying:
What to do now ? I guess it's not possible to flash stock rom without any charge... How to charge my phone ? What other option(s) do i have ?
PS : Sorry if this has been already discussed.
Click to expand...
Click to collapse
You must not use TWRP from its official site
Those people have not fixed this ****ty bug and many people have got bootloops due to this including me
Use the one available in xda
Solution-
Try to boot the phone in bootloader mode
Whenever the device shows the moto logo immediately press and hold power button and as soon as the screen goes black immediately press and hold power + volume down bottom and it should boot into bootloader
Charge the phone through a USB in bootloader mode
And then either flash the stock firmware again or use custom ROMs
Sent from falcon
PRESS THANKS IF HELPED?????
Okk, i was able to go into bootloader mode and charge through usb cable.. But, since then i am trying again & again to flash a rom to get my phone working but everytime something is going wrong.. First i tried to flash stock rom but it was frequently rebooting. So then i tried to flash Resurrection Remix : now it's stuck at RR logo screen for 2 hrs.. Don't know what am i doing wrong ... I am very much frustrated right now... I am now thinking to flash optimised stock rom... Some help from your side will be very helpfull :
1. Please tell me which recovery to use for peace of mind and please give me link for that.
2. I am thinking to use This stock rom to flash. ( I am facing problem with untouched version) Please tell me the exact procedure . Flash recovery > Wipe cache, dalvik, system,data in recovery > Flash rom and then do i need to flash the radio version ? And if i want to root, can i flash SuperSU after that ?
Please Note : I know that what i am asking can be found after a little bit of searching. But i have wasted 4 days and still remaining at the the same spot. Your 15 minutes time can save my another 4 days and put away my frustration i am facing right now. I am asking this because i have gone into such a state that i am thinking of throwing my phone and sleeep right away.. Please do me a favor.
My phone : Moto G 1st Gen. ( XT1033 ) , Lollipop 5.0.2, Bootloader unlocked
savvy54 said:
Okk, i was able to go into bootloader mode and charge through usb cable.. But, since then i am trying again & again to flash a rom to get my phone working but everytime something is going wrong.. First i tried to flash stock rom but it was frequently rebooting. So then i tried to flash Resurrection Remix : now it's stuck at RR logo screen for 2 hrs.. Don't know what am i doing wrong ... I am very much frustrated right now... I am now thinking to flash optimised stock rom... Some help from your side will be very helpfull :
1. Please tell me which recovery to use for peace of mind and please give me link for that.
2. I am thinking to use This stock rom to flash. ( I am facing problem with untouched version) Please tell me the exact procedure . Flash recovery > Wipe cache, dalvik, system,data in recovery > Flash rom and then do i need to flash the radio version ? And if i want to root, can i flash SuperSU after that ?
Please Note : I know that what i am asking can be found after a little bit of searching. But i have wasted 4 days and still remaining at the the same spot. Your 15 minutes time can save my another 4 days and put away my frustration i am facing right now. I am asking this because i have gone into such a state that i am thinking of throwing my phone and sleeep right away.. Please do me a favor.
My phone : Moto G 1st Gen. ( XT1033 ) , Lollipop 5.0.2, Bootloader unlocked
Click to expand...
Click to collapse
Link to recovery
http://forum.xda-developers.com/showthread.php?p=57672469
You MUST use the stock version 2.8.6.0 ( do not use the gpe version)
Do not use 2.8.6.0.1 ( it still has bugs)
Flash the recovery through fastboot
Then one by one wipe the following and tell me if any error occurs
System
Data
Cache
Dalvik cache
You must report back the error that comes in recovery logs when you wipe these partitions
Report back
Sent from falcon
PRESS THANKS IF HELPED?????
sjandroiddeveloper said:
Then one by one wipe the following and tell me if any error occurs
System
Data
Cache
Dalvik cache
You must report back the error that comes in recovery logs when you wipe these partitions
Click to expand...
Click to collapse
1. System Formatting system using make_ext4fs function.
Updating partition details.....
E: unable to stat '/data/property/.temp.sx2jrN/.last_install_path
E: unable to stat '/data/property/.temp.Md9EXT
E: unable to stat '/data/property/.temp.cCjJv7/0
E: unable to stat '/data/property/.temp.cCjJv7/legacy
E: unable to stat '/data/property/.temp.cCjJv7/0
E: unable to stat '/data/property/.temp.cCjJv7/legacy
E: unable to stat '/data/property/.temp.cCjJv7/0
E: unable to stat '/data/property/.temp.cCjJv7/ legacy
E: unable to stat '/data/property/.temp.cCjJv7/0
E: unable to stat '/data/property/.temp.cCjJv7/legacy
E: unable to stat '/data/property/.temp.9107E0
E: unable to stat '/data/property/.temp.DpW8n7
E: unable to stat '/data/property/.temp.EXVJvT
E: unable to stat '/data/property/.temp.gKptm9
E: unable to stat '/data/property/.temp. Ab0nvs
2. Data Wiping data without wiping /data/media.....
Done
Updating partition details.....
Same error as above
3. Cache and 4. Dalvik cache Same error showed up after wiping cache and Dalvik cache (wipe complete, error during updating partition...)
PS : I think this error was not present when i tried flashing stock rom or RR rom
Update Today i tried installing optimised stock rom through usb otg... Following error occured :
E; Error executing updater binary in zip <zip name> followed by same error in upadating partrition as above..
savvy54 said:
1. System Formatting system using make_ext4fs function.
Updating partition details.....
E: unable to stat '/data/property/.temp.sx2jrN/.last_install_path
E: unable to stat '/data/property/.temp.Md9EXT
E: unable to stat '/data/property/.temp.cCjJv7/0
E: unable to stat '/data/property/.temp.cCjJv7/legacy
E: unable to stat '/data/property/.temp.cCjJv7/0
E: unable to stat '/data/property/.temp.cCjJv7/legacy
E: unable to stat '/data/property/.temp.cCjJv7/0
E: unable to stat '/data/property/.temp.cCjJv7/ legacy
E: unable to stat '/data/property/.temp.cCjJv7/0
E: unable to stat '/data/property/.temp.cCjJv7/legacy
E: unable to stat '/data/property/.temp.9107E0
E: unable to stat '/data/property/.temp.DpW8n7
E: unable to stat '/data/property/.temp.EXVJvT
E: unable to stat '/data/property/.temp.gKptm9
E: unable to stat '/data/property/.temp. Ab0nvs
2. Data Wiping data without wiping /data/media.....
Done
Updating partition details.....
Same error as above
3. Cache and 4. Dalvik cache Same error showed up after wiping cache and Dalvik cache (wipe complete, error during updating partition...)
PS : I think this error was not present when i tried flashing stock rom or RR rom
Update Today i tried installing optimised stock rom through usb otg... Following error occured :
E; Error executing updater binary in zip followed by same error in upadating partrition as above..
Click to expand...
Click to collapse
It appears that all your partitions are corrupted
You need to format them
In TWRP format ( not wipe) all partitions
The option to format data partition is straight forward and given in wipe menu
For other partitions (system ,cache) go to wipe---> advanced wipe and change the file system of system and cache partition to ext4 ( don't change to anything else)
This will format them
Try this and then try to do normal wipes and see if you are successful and report back
Sent from falcon
Press thanks if helped?????
sjandroiddeveloper said:
It appears that all your partitions are corrupted
You need to format them
In TWRP format ( not wipe) all partitions
The option to format data partition is straight forward and given in wipe menu
For other partitions (system ,cache) go to wipe---> advanced wipe and change the file system of system and cache partition to ext4 ( don't change to anything else)
This will format them
Try this and then try to do normal wipes and see if you are successful and report back
Sent from falcon
Press thanks if helped
Click to expand...
Click to collapse
When i tried to format data partition same error showed up... And when i tried to change file system of system and cache partition , above it is shown that format complete , successful but in the log same error appeared..
savvy54 said:
When i tried to format data partition same error showed up... And when i tried to change file system of system and cache partition , above it is shown that format complete , successful but in the log same error appeared..
Click to expand...
Click to collapse
Try philz touch from here
https://drive.google.com/file/d/0B7lxW9DP17gNalk2Y3EtcU9JZTA/edit?usp=docslist_api
Go to wipe and format----> custom format and then try to format all partitions and see if you're successful
Sent from falcon
PRESS THANKS IF HELPED?????
sjandroiddeveloper said:
Try philz touch.
Go to wipe and format----> custom format and then try to format all partitions and see if you're successful
Sent from falcon
PRESS THANKS IF HELPED
Click to expand...
Click to collapse
Yes, now format is successful. Formatting data for first time showed some error but in second time it was successful.
So, what to do now ? I want to go to stock.. So, anything in that direction will be helpful..
Can i flash the link i have posted ? if yes, then do i need to flash radio firmware ?
savvy54 said:
Yes, now format is successful. Formatting data for first time showed some error but in second time it was successful.
So, what to do now ? I want to go to stock.. So, anything in that direction will be helpful..
Can i flash the link i have posted ? if yes, then do i need to flash radio firmware ?
Click to expand...
Click to collapse
The link you posted is not pure stock
Its optimised means it is a custom version of stock ROM
The same dev ( @lost101 ) also provides pure versions of stock rom flashable through recovery so try that if you want a pure Motorola ROM
But I suggest you to use CM 12.1 now, as its based on android 5.1.1 its always better then stock 5.0.2 in terms of stability plus you get plenty of customization options and there's already a built in root manager
And the ROM is getting better day by day
So finally its your choice
PS:- No need to flash radio
Sent from falcon
PRESS THANKS IF HELPED?????
sjandroiddeveloper said:
The link you posted is not pure stock
Its optimised means it is a custom version of stock ROM
The same dev ( @lost101 ) also provides pure versions of stock rom flashable through recovery so try that if you want a pure Motorola ROM
But I suggest you to use CM 12.1 now, as its based on android 5.1.1 its always better then stock 5.0.2 in terms of stability plus you get plenty of customization options and there's already a built in root manager
And the ROM is getting better day by day
So finally its your choice
PS:- No need to flash radio
Sent from falcon
PRESS THANKS IF HELPED
Click to expand...
Click to collapse
I already flashed that customised rom.. And also the radio firmware.. Everything is fine now..
I have always wanted to flash CM but stepped back because it is nightly build... However, i have also heard that it is very stable and you are also saying that... So, thinking of flashing that... Please give me the link which to flash & link for gapps if needed... I have just recovered my phone after a long battle and don't want to screw up now by flashing wrong rom..:fingers-crossed:
PS : I don't know how to thank you.. You are a savior man.. This is my first time in unlocking ,rooting and all that stuff and i screw up the thing.. Again, thank you for your help...:good::good:
savvy54 said:
I already flashed that customised rom.. And also the radio firmware.. Everything is fine now..
I have always wanted to flash CM but stepped back because it is nightly build... However, i have also heard that it is very stable and you are also saying that... So, thinking of flashing that... Please give me the link which to flash & link for gapps if needed... I have just recovered my phone after a long battle and don't want to screw up now by flashing wrong rom..:fingers-crossed:
PS : I don't know how to thank you.. You are a savior man.. This is my first time in unlocking ,rooting and all that stuff and i screw up the thing.. Again, thank you for your help...:good::good:
Click to expand...
Click to collapse
As a general info, just don't play with fastboot commands and now don't try to flash stock firmware through fastboot again as it most likely will mess with your partitions
And for trying different ROMs you need a backed up system and data partition with a fully working recovery, then experiment with whatever ROM you want there is no harm ( if the ROM don't boot you can force reboot and restore the backup you made)
Link to CM 12.1 nightlies
https://download.cyanogenmod.org/?device=falcon
And just so you know cm is fully stable, I have been using it for three months and I never looked back at stock ones
So flash the latest nightly
Link to Gapps
http://forum.xda-developers.com/android/software/reborn-gapps-5-t3074660
Happy flashing
Sent from falcon
PRESS THANKS IF HELPED?????
Hello... i hv YU YUNIQUE mobile... i hd stock rom on it... recently i hv rooted it and flash twrp recovery on it... i ws suppose to flash cynogenmod 14.1 on it which i hv got from XDA forum only.... i flashed the the TWRP recovery first and thn i wiped the whole cache and internal data and flashed CM14.1 rom which i got from XDA and also gapps package.... it got flashed.. recovery showed installation/flash successful.. thn i choosed system reboot.. the phone went into booting process.. the phone gets stuck on booting process.. the cynogen boot logo keeps on blinking but i cant get the setup wizard or the home screen on the phone... if i keep holding the power key it reboots again and remains on the booting process only.....
i m able to open the TWRP recovery.... if i repeat the procees again it does the same thing, keeps on booting.... i tried adb side load stiil it does the same... wt shld i do... wt method shld i use..... plz help....
Sairaj3 said:
Hello... i hv YU YUNIQUE mobile... i hd stock rom on it... recently i hv rooted it and flash twrp recovery on it... i ws suppose to flash cynogenmod 14.1 on it which i hv got from XDA forum only.... i flashed the the TWRP recovery first and thn i wiped the whole cache and internal data and flashed CM14.1 rom which i got from XDA and also gapps package.... it got flashed.. recovery showed installation/flash successful.. thn i choosed system reboot.. the phone went into booting process.. the phone gets stuck on booting process.. the cynogen boot logo keeps on blinking but i cant get the setup wizard or the home screen on the phone... if i keep holding the power key it reboots again and remains on the booting process only.....
i m able to open the TWRP recovery.... if i repeat the procees again it does the same thing, keeps on booting.... i tried adb side load stiil it does the same... wt shld i do... wt method shld i use..... plz help....
Click to expand...
Click to collapse
Is the ROM you are flashing made for your specific model number? Are you using the newest version of TWRP that you can find? Are you factory resetting, wiping cache and dalvik when you flash? Have you tried doing an advanced wipe in TWRP to wipe system partition and data partition and then flashing your ROM then wiping cache and dalvik after you flash?
Sent from my SCH-I535 using Tapatalk
i flashed the latest twrp recovery.... i downloaded the rom which is made for my phone model only...
Steps:
Wipe dalvik cache,cache,data,system.
Installing rom zip and then gapps zip.
Reboot system.
After flashing devices stuck in boot loop....
Sairaj3 said:
i flashed the latest twrp recovery.... i downloaded the rom which is made for my phone model only...
Steps:
Wipe dalvik cache,cache,data,system.
Installing rom zip and then gapps zip.
Reboot system.
After flashing devices stuck in boot loop....
Click to expand...
Click to collapse
Lollipop, marshmallow and nougat van take up to 30 minutes to boot the first time, are you giving it time to load or are you just getting impatient?
Sent from my SCH-I535 using Tapatalk
Droidriven said:
Lollipop, marshmallow and nougat van take up to 30 minutes to boot the first time, are you giving it time to load or are you just getting impatient?
Sent from my SCH-I535 using Tapatalk
Click to expand...
Click to collapse
ok...bt two times i kpt it for ovr night also still didnt wrk... bt wt is the best procedure to flash rom... meaning, which data should be wiped, shld i wipe sytem data also, after flashing the rom n gapps also i hv to wipe cache, etc......
Sairaj3 said:
ok...bt two times i kpt it for ovr night also still didnt wrk... bt wt is the best procedure to flash rom... meaning, which data should be wiped, shld i wipe sytem data also, after flashing the rom n gapps also i hv to wipe cache, etc......
Click to expand...
Click to collapse
To be thorough and make sure you miss nothing, I suggest these steps:
1)in TWRP, tap the Wipe button, then it should say at the top of the screen: "factory reset, wipe cache and wipe dalvik". Swipe the slider to do the wipe.
2)after wiping, tap the home button in TWRP, on TWRP home screen, tap the Wipe button again, then tap the advanced wipe option, wipe system and data.
3)tap home button, on home screen, tap install then flash your ROM and Gapps.
4)after flashing ROM and Gapps, wipe cache and dalvik(do not factory reset).
5)reboot.
Sent from my SCH-I535 using Tapatalk
Hi XDA Developers.
I am using Swipe Elite Plus 4G.
Before 2 Days I connected to wifi and the no apps in mobile were opening.
I Restarted the mobile but it stuck on Boot Screen. I Flashed it using QFIL Tool. After Flashing Successfully when i Re-stared the phone it got stucked on Encryption Unsuccessful Error and if I a clicking on Reset Now button it seems to do nothing.
I tried Wipe Cache and Factory Reset from Recovery Mode But Same Error Occured. I even tried re flashing the Mobile using Other Flashing File But the Error is not resolved.
also When I Am opening Recovery Mode
Falied To Mount /cache error is showing.
If anyone has came out with any solution in this regards, Please share.
Also, i have one another same model handset, Please advice if any read & Write tool for firmware installation is available (If this resolves the issue).
Developers Please Help In This Regards...
Hi !
It is impossible for anyone to write any tool for a device that one doesn`t own
If you`re able to boot int recovery , is there any option to format data ? Format not delete or erase
Cheers
xanthrax said:
Hi !
It is impossible for anyone to write any tool for a device that one doesn`t own
If you`re able to boot int recovery , is there any option to format data ? Format not delete or erase
Cheers
Click to expand...
Click to collapse
Yes I Tries Format Data In Recovery Mode But Still Same Error. I Tries Wipe Cache After That Also Failed To Mount /cache error is showing. I am only able to access apply updates from ADB & apply Updates from SD Card Options
Go back to the thread where you have downloaded the recovery and be sure that it is for your device variant, flash it again and do format data again
Sent from my Darkside of Oneplus 3T
I have a serius problem with my lenovo A6000plus i have installed unofficial rom (Kraft-A6000-s_S017_151016_WCEC) and all was good, but one day, all my apps freeze one after one... I try to reboot it shows a message that your encription has breaked wipe data and reboot after that i wipe data and perform reboot but phone stuck and show lenovo sign and does'nt get on i tried to apply update from sd card but it shows e:can't open /cache/recovery/last_install error plz tell me how to fix that problem