Hello guys, i have Moto G 1st Gen. Indian version (XT1033) running android 5.0.2... Yesterday i rooted my moto g by unlocking bootloader and flashing TWRP 2.8.6.0-XT1032 & SuperSU 2.45... During the process there was some error (like general unlock failure, wipe partition failure etc). I ignored them and continued... It was booted normally... Then i installed Root Checker and confirmed that root has been done successfully....
After that i tried to make a Nandroid backup using TWRP. Message popped up saying that backup is successful.. Then i pressed reboot system. Then it went into bootloop (stuck at bootloader unlocked warning message). :crying:
When this happened, i thought to flash recovery again and flash stock rom. By the time i downloaded stock rom, the phone discharged completely. Now the phone is not charging I have tried using usb charging through pc and using socket charger, but it's stuck at 0%... (I have kept it for hours) Sometime it try to boot and bootloader unlocked warning appears and stuck there.. after sometime it again go into battery charging logo with 0% and then repeat the process again.. When i try using usb cable, the same cycle continues with frequent connecting and disconnecting... :crying:
What to do now ? I guess it's not possible to flash stock rom without any charge... How to charge my phone ? What other option(s) do i have ?
PS : Sorry if this has been already discussed.
savvy54 said:
Hello guys, i have Moto G 1st Gen. Indian version (XT1033) running android 5.0.2... Yesterday i rooted my moto g by unlocking bootloader and flashing TWRP 2.8.6.0-XT1032 & SuperSU 2.45... During the process there was some error (like general unlock failure, wipe partition failure etc). I ignored them and continued... It was booted normally... Then i installed Root Checker and confirmed that root has been done successfully....
After that i tried to make a Nandroid backup using TWRP. Message popped up saying that backup is successful.. Then i pressed reboot system. Then it went into bootloop (stuck at bootloader unlocked warning message). :crying:
When this happened, i thought to flash recovery again and flash stock rom. By the time i downloaded stock rom, the phone discharged completely. Now the phone is not charging I have tried using usb charging through pc and using socket charger, but it's stuck at 0%... (I have kept it for hours) Sometime it try to boot and bootloader unlocked warning appears and stuck there.. after sometime it again go into battery charging logo with 0% and then repeat the process again.. When i try using usb cable, the same cycle continues with frequent connecting and disconnecting... :crying:
What to do now ? I guess it's not possible to flash stock rom without any charge... How to charge my phone ? What other option(s) do i have ?
PS : Sorry if this has been already discussed.
Click to expand...
Click to collapse
You must not use TWRP from its official site
Those people have not fixed this ****ty bug and many people have got bootloops due to this including me
Use the one available in xda
Solution-
Try to boot the phone in bootloader mode
Whenever the device shows the moto logo immediately press and hold power button and as soon as the screen goes black immediately press and hold power + volume down bottom and it should boot into bootloader
Charge the phone through a USB in bootloader mode
And then either flash the stock firmware again or use custom ROMs
Sent from falcon
PRESS THANKS IF HELPED?????
Okk, i was able to go into bootloader mode and charge through usb cable.. But, since then i am trying again & again to flash a rom to get my phone working but everytime something is going wrong.. First i tried to flash stock rom but it was frequently rebooting. So then i tried to flash Resurrection Remix : now it's stuck at RR logo screen for 2 hrs.. Don't know what am i doing wrong ... I am very much frustrated right now... I am now thinking to flash optimised stock rom... Some help from your side will be very helpfull :
1. Please tell me which recovery to use for peace of mind and please give me link for that.
2. I am thinking to use This stock rom to flash. ( I am facing problem with untouched version) Please tell me the exact procedure . Flash recovery > Wipe cache, dalvik, system,data in recovery > Flash rom and then do i need to flash the radio version ? And if i want to root, can i flash SuperSU after that ?
Please Note : I know that what i am asking can be found after a little bit of searching. But i have wasted 4 days and still remaining at the the same spot. Your 15 minutes time can save my another 4 days and put away my frustration i am facing right now. I am asking this because i have gone into such a state that i am thinking of throwing my phone and sleeep right away.. Please do me a favor.
My phone : Moto G 1st Gen. ( XT1033 ) , Lollipop 5.0.2, Bootloader unlocked
savvy54 said:
Okk, i was able to go into bootloader mode and charge through usb cable.. But, since then i am trying again & again to flash a rom to get my phone working but everytime something is going wrong.. First i tried to flash stock rom but it was frequently rebooting. So then i tried to flash Resurrection Remix : now it's stuck at RR logo screen for 2 hrs.. Don't know what am i doing wrong ... I am very much frustrated right now... I am now thinking to flash optimised stock rom... Some help from your side will be very helpfull :
1. Please tell me which recovery to use for peace of mind and please give me link for that.
2. I am thinking to use This stock rom to flash. ( I am facing problem with untouched version) Please tell me the exact procedure . Flash recovery > Wipe cache, dalvik, system,data in recovery > Flash rom and then do i need to flash the radio version ? And if i want to root, can i flash SuperSU after that ?
Please Note : I know that what i am asking can be found after a little bit of searching. But i have wasted 4 days and still remaining at the the same spot. Your 15 minutes time can save my another 4 days and put away my frustration i am facing right now. I am asking this because i have gone into such a state that i am thinking of throwing my phone and sleeep right away.. Please do me a favor.
My phone : Moto G 1st Gen. ( XT1033 ) , Lollipop 5.0.2, Bootloader unlocked
Click to expand...
Click to collapse
Link to recovery
http://forum.xda-developers.com/showthread.php?p=57672469
You MUST use the stock version 2.8.6.0 ( do not use the gpe version)
Do not use 2.8.6.0.1 ( it still has bugs)
Flash the recovery through fastboot
Then one by one wipe the following and tell me if any error occurs
System
Data
Cache
Dalvik cache
You must report back the error that comes in recovery logs when you wipe these partitions
Report back
Sent from falcon
PRESS THANKS IF HELPED?????
sjandroiddeveloper said:
Then one by one wipe the following and tell me if any error occurs
System
Data
Cache
Dalvik cache
You must report back the error that comes in recovery logs when you wipe these partitions
Click to expand...
Click to collapse
1. System Formatting system using make_ext4fs function.
Updating partition details.....
E: unable to stat '/data/property/.temp.sx2jrN/.last_install_path
E: unable to stat '/data/property/.temp.Md9EXT
E: unable to stat '/data/property/.temp.cCjJv7/0
E: unable to stat '/data/property/.temp.cCjJv7/legacy
E: unable to stat '/data/property/.temp.cCjJv7/0
E: unable to stat '/data/property/.temp.cCjJv7/legacy
E: unable to stat '/data/property/.temp.cCjJv7/0
E: unable to stat '/data/property/.temp.cCjJv7/ legacy
E: unable to stat '/data/property/.temp.cCjJv7/0
E: unable to stat '/data/property/.temp.cCjJv7/legacy
E: unable to stat '/data/property/.temp.9107E0
E: unable to stat '/data/property/.temp.DpW8n7
E: unable to stat '/data/property/.temp.EXVJvT
E: unable to stat '/data/property/.temp.gKptm9
E: unable to stat '/data/property/.temp. Ab0nvs
2. Data Wiping data without wiping /data/media.....
Done
Updating partition details.....
Same error as above
3. Cache and 4. Dalvik cache Same error showed up after wiping cache and Dalvik cache (wipe complete, error during updating partition...)
PS : I think this error was not present when i tried flashing stock rom or RR rom
Update Today i tried installing optimised stock rom through usb otg... Following error occured :
E; Error executing updater binary in zip <zip name> followed by same error in upadating partrition as above..
savvy54 said:
1. System Formatting system using make_ext4fs function.
Updating partition details.....
E: unable to stat '/data/property/.temp.sx2jrN/.last_install_path
E: unable to stat '/data/property/.temp.Md9EXT
E: unable to stat '/data/property/.temp.cCjJv7/0
E: unable to stat '/data/property/.temp.cCjJv7/legacy
E: unable to stat '/data/property/.temp.cCjJv7/0
E: unable to stat '/data/property/.temp.cCjJv7/legacy
E: unable to stat '/data/property/.temp.cCjJv7/0
E: unable to stat '/data/property/.temp.cCjJv7/ legacy
E: unable to stat '/data/property/.temp.cCjJv7/0
E: unable to stat '/data/property/.temp.cCjJv7/legacy
E: unable to stat '/data/property/.temp.9107E0
E: unable to stat '/data/property/.temp.DpW8n7
E: unable to stat '/data/property/.temp.EXVJvT
E: unable to stat '/data/property/.temp.gKptm9
E: unable to stat '/data/property/.temp. Ab0nvs
2. Data Wiping data without wiping /data/media.....
Done
Updating partition details.....
Same error as above
3. Cache and 4. Dalvik cache Same error showed up after wiping cache and Dalvik cache (wipe complete, error during updating partition...)
PS : I think this error was not present when i tried flashing stock rom or RR rom
Update Today i tried installing optimised stock rom through usb otg... Following error occured :
E; Error executing updater binary in zip followed by same error in upadating partrition as above..
Click to expand...
Click to collapse
It appears that all your partitions are corrupted
You need to format them
In TWRP format ( not wipe) all partitions
The option to format data partition is straight forward and given in wipe menu
For other partitions (system ,cache) go to wipe---> advanced wipe and change the file system of system and cache partition to ext4 ( don't change to anything else)
This will format them
Try this and then try to do normal wipes and see if you are successful and report back
Sent from falcon
Press thanks if helped?????
sjandroiddeveloper said:
It appears that all your partitions are corrupted
You need to format them
In TWRP format ( not wipe) all partitions
The option to format data partition is straight forward and given in wipe menu
For other partitions (system ,cache) go to wipe---> advanced wipe and change the file system of system and cache partition to ext4 ( don't change to anything else)
This will format them
Try this and then try to do normal wipes and see if you are successful and report back
Sent from falcon
Press thanks if helped
Click to expand...
Click to collapse
When i tried to format data partition same error showed up... And when i tried to change file system of system and cache partition , above it is shown that format complete , successful but in the log same error appeared..
savvy54 said:
When i tried to format data partition same error showed up... And when i tried to change file system of system and cache partition , above it is shown that format complete , successful but in the log same error appeared..
Click to expand...
Click to collapse
Try philz touch from here
https://drive.google.com/file/d/0B7lxW9DP17gNalk2Y3EtcU9JZTA/edit?usp=docslist_api
Go to wipe and format----> custom format and then try to format all partitions and see if you're successful
Sent from falcon
PRESS THANKS IF HELPED?????
sjandroiddeveloper said:
Try philz touch.
Go to wipe and format----> custom format and then try to format all partitions and see if you're successful
Sent from falcon
PRESS THANKS IF HELPED
Click to expand...
Click to collapse
Yes, now format is successful. Formatting data for first time showed some error but in second time it was successful.
So, what to do now ? I want to go to stock.. So, anything in that direction will be helpful..
Can i flash the link i have posted ? if yes, then do i need to flash radio firmware ?
savvy54 said:
Yes, now format is successful. Formatting data for first time showed some error but in second time it was successful.
So, what to do now ? I want to go to stock.. So, anything in that direction will be helpful..
Can i flash the link i have posted ? if yes, then do i need to flash radio firmware ?
Click to expand...
Click to collapse
The link you posted is not pure stock
Its optimised means it is a custom version of stock ROM
The same dev ( @lost101 ) also provides pure versions of stock rom flashable through recovery so try that if you want a pure Motorola ROM
But I suggest you to use CM 12.1 now, as its based on android 5.1.1 its always better then stock 5.0.2 in terms of stability plus you get plenty of customization options and there's already a built in root manager
And the ROM is getting better day by day
So finally its your choice
PS:- No need to flash radio
Sent from falcon
PRESS THANKS IF HELPED?????
sjandroiddeveloper said:
The link you posted is not pure stock
Its optimised means it is a custom version of stock ROM
The same dev ( @lost101 ) also provides pure versions of stock rom flashable through recovery so try that if you want a pure Motorola ROM
But I suggest you to use CM 12.1 now, as its based on android 5.1.1 its always better then stock 5.0.2 in terms of stability plus you get plenty of customization options and there's already a built in root manager
And the ROM is getting better day by day
So finally its your choice
PS:- No need to flash radio
Sent from falcon
PRESS THANKS IF HELPED
Click to expand...
Click to collapse
I already flashed that customised rom.. And also the radio firmware.. Everything is fine now..
I have always wanted to flash CM but stepped back because it is nightly build... However, i have also heard that it is very stable and you are also saying that... So, thinking of flashing that... Please give me the link which to flash & link for gapps if needed... I have just recovered my phone after a long battle and don't want to screw up now by flashing wrong rom..:fingers-crossed:
PS : I don't know how to thank you.. You are a savior man.. This is my first time in unlocking ,rooting and all that stuff and i screw up the thing.. Again, thank you for your help...:good::good:
savvy54 said:
I already flashed that customised rom.. And also the radio firmware.. Everything is fine now..
I have always wanted to flash CM but stepped back because it is nightly build... However, i have also heard that it is very stable and you are also saying that... So, thinking of flashing that... Please give me the link which to flash & link for gapps if needed... I have just recovered my phone after a long battle and don't want to screw up now by flashing wrong rom..:fingers-crossed:
PS : I don't know how to thank you.. You are a savior man.. This is my first time in unlocking ,rooting and all that stuff and i screw up the thing.. Again, thank you for your help...:good::good:
Click to expand...
Click to collapse
As a general info, just don't play with fastboot commands and now don't try to flash stock firmware through fastboot again as it most likely will mess with your partitions
And for trying different ROMs you need a backed up system and data partition with a fully working recovery, then experiment with whatever ROM you want there is no harm ( if the ROM don't boot you can force reboot and restore the backup you made)
Link to CM 12.1 nightlies
https://download.cyanogenmod.org/?device=falcon
And just so you know cm is fully stable, I have been using it for three months and I never looked back at stock ones
So flash the latest nightly
Link to Gapps
http://forum.xda-developers.com/android/software/reborn-gapps-5-t3074660
Happy flashing
Sent from falcon
PRESS THANKS IF HELPED?????
Related
Just bricked my defy last nigh accidentally then flased a full nordic 2.2.2 via rsd lite everything went fibe BUT when i was going to install some roms via nandroid backup I get this errors.
tried flashing a 2.1 eclair but it wont boot up so I reflashed the 2.2.2 nordic for about 10x already
here's what cwm says when restoring
ClockworkMod Recovery v2.5.1.8
Checking MD5 sums...
Restoring System...
Restoring Data...
Restoring ,Android_secure...
Restoring Cache...
Restoring sd-ext
no app2sd partiton found. Skipping format of /sd-ext.
E:Can't mount /dev/block/mmcblk0p2 (file exists)
Can't mount /sd-ext/!
and more when on the stock recovery is says something that it can't mount etc2
please help me out guys this is really important
ive read through some forums and found that I need to repartition.how?what's the easiest way?
tried wiping dalvik cache but it fails too.
cant download from market too.
this sucks.
its my first android phone and now im messed up!!
I will really apreciate your help please
EDIT:now Im using MIUI but still unable to mount sd-ext
and these few errors
E:Can't mount /dev/block/mmcblk0p2
(File exists)
E:Can't mount CACHE:recovery/command
and log
what do O do pls?
sent from my MB525 using XDA Premium App
In stock recovery do factory reset wipe cache and reboot and flash ur SBF....
Sent from my MB525 using XDA App
bricked?
WTH happened?
are u able to go stock recovery? did you do a data & cache wipe?
it should all do it.after u can flash a different & clean SBF.
also try to format sdcard as well..dont bother losing the nand backup...
then just use rsd lite to reflash a different leaked/official 2.2 froyo
hi tnx all for ur help.
yes i am able to go stock recovery and even cwm recovery via 2init 1.4 its a stock clean froyo
im getting this error on stock recovery
it says
E:un able to read cahe/recovery/command and starter
anyone suggestion?
wiping dalvik cant be done due to errors posted above
Sent from my MB525 using XDA Premium App
After wipe and reset just flash SBF...Error is not problem according to me....
Sent from my toilet using my Motorola DEFY
Ok if you heve stock and second init recovery then nothing is lost. What CWM- says is totally OK. And stock recovery always unable to read /cache/recovery/command.
What firmware were you on when installed second init? You sould try to restore the nandroid of that firmware with CWM.
If you wiped your phone with stock recovery then CWM will not work then you should flash your stock sbf with RSD lite.
ok will try when I get back home and will post the results
note: im on cm7 beta 6 b4 this happened.
Sent from my MB525 using XDA Premium App
You have to go back to Nordic, via RSD Lite .
Flash the full rom, since you already flashed the whole sbf one time, you won't be worry about downgradability, it's lost.
Then wipe again, at the end the cwm should work as expected.
Just as a note after i flashed the full Nordic sbf i got stuck so i went into stock recovery and wiped data etc. This let me boot the nordic rom. Then just need to root, install 2nd init and reinstall cm7
yay! now im on cm7 and will check if the errors are still there
and btw how do I go back to 2.2.2 stock in order to install ephunord rom
edit:
custom recovery says
E:unable to read cahe/recovery/command
E:unable to read cahe/recovery/starter
then when wiping dalvik cache on cwm
when pressing wipe dalvik cache
E:unknown volume for path [/sd-ext]
then when I confirm it it says
dalvik cache wiped.
is it normal?
can't install the google apps package too downloaded many times but it always end up on bad installation or something
wew im so stressed with my phone right now
gonemad02 said:
yay! now im on cm7 and will check if the errors are still there
and btw how do I go back to 2.2.2 stock in order to install ephunord rom
edit:
custom recovery says
E:unable to read cahe/recovery/command
E:unable to read cahe/recovery/starter
then when wiping dalvik cache on cwm
when pressing wipe dalvik cache
E:unknown volume for path [/sd-ext]
then when I confirm it it says
dalvik cache wiped.
is it normal?
can't install the google apps package too downloaded many times but it always end up on bad installation or something
wew im so stressed with my phone right now
Click to expand...
Click to collapse
yah that appears on mine too,those unable to read things:i reformat my sdcard clean & i treat it normal since i've been flashing & experimenting a lot,& i dont do a backup of any of my nands i only back up my apps.
since IMO i will never go back to eclair for any warranty,only forward to the developments..
i trust my defy just like i trust the resources i get here in the forums ;D
my thing is i cant do a restore on nands. anyway what's the format of your sd card?is it fat32?
gonemad02 said:
my thing is i cant do a restore on nands. anyway what's the format of your sd card?is it fat32?
Click to expand...
Click to collapse
Have you tried to format your sd card with your phone?(not from pc)
yes tried it a couple of times already
anyone knows how do I wipe dalvik cache using adb?
these are the remaining errors I still have
E:Can't mount /dev/block/mmcblk0p2
(File exists)
E:Can't mount CACHE:recovery/command
Hi. I flashed sbf JRDNEM_U3_3.4.3-11. But my phone is stuck on animated bootlogo (with "blur"). I flashed back my 100% previously worked sbf - U3_3.4.2_155-002. And it stuck on animated "android". When i try to load recovery - green android robot with "!" and nothing. What i do wrong?
bomgavs said:
Hi. I flashed sbf JRDNEM_U3_3.4.3-11. But my phone is stuck on animated bootlogo (with "blur"). I flashed back my 100% previously worked sbf - U3_3.4.2_155-002. And it stuck on animated "android". When i try to load recovery - green android robot with "!" and nothing. What i do wrong?
Click to expand...
Click to collapse
try wiping cache factory and dalvik cache
gonemad02 said:
my thing is i cant do a restore on nands. anyway what's the format of your sd card?is it fat32?
Click to expand...
Click to collapse
most probably yes,my card would be on fat32 on default since its 4gb.
unless i force format it w/ fat16 from my pc.but it shouldnt be an issue.
well i get those kinds of errors too.i cant flash the gapps zip for the cm7
i even get failed write to SD whenever i download an app from the market or an unknown file out of the market.
bomgavs said:
Hi. I flashed sbf JRDNEM_U3_3.4.3-11. But my phone is stuck on animated bootlogo (with "blur"). I flashed back my 100% previously worked sbf - U3_3.4.2_155-002. And it stuck on animated "android". When i try to load recovery - green android robot with "!" and nothing. What i do wrong?
Click to expand...
Click to collapse
when u see the green robot:
press the volume up & down together to enter stock recovery.
use the volume up/down & power button to select.
tap ok button on the left corner to continue the process of wipe.
I see. we do really have the same issue.
Im now on MIUI.shame...can't even try roms via nandroid backups.
will parted work to fix/format my cache including the sd-ext one?
I cant mount it no matter what I do
I believe parted will work.
and whenever I try to root using super one click
it gives some error regarding cant mount etc2 file exists
but in the ened it's successful.
Sent from my MB525 using XDA Premium App
Errors in our sd card
Well yah.thats tthe reason why im back now on stock blur french..everything back to normal & ready to flash again...i dont know,maybe the card gets corrupted whenever im on a custom rom...
Ok so how's miui?any luck on that one? No time to flash now busy w/ my baby.... Im still longing for the cm7,maybe the nxt rel will be complete.
Hi guys,
i've a samsung p6200 and i was running on ics 4.0.4 austria, then i've tried to move to P6200/P6210/T869 CyanogenMod 10 using cwm recovery.
so, since then i couldn't install any other rom without bootlooping.
I tried putting back ICS (previous version) using odin like i did before, it completes without errors but i get stuck on galaxy logo.
I tried several ways of flashing through cwm and heimdall, all go through but end up with the same results :S
Can i get some help? I'm kinda lost here and don't know what to try next.
Thanks in advance.
xzard said:
Hi guys,
i've a samsung p6200 and i was running on ics 4.0.4 austria, then i've tried to move to P6200/P6210/T869 CyanogenMod 10 using cwm recovery.
so, since then i couldn't install any other rom without bootlooping.
I tried putting back ICS (previous version) using odin like i did before, it completes without errors but i get stuck on galaxy logo.
I tried several ways of flashing through cwm and heimdall, all go through but end up with the same results :S
Can i get some help? I'm kinda lost here and don't know what to try next.
Thanks in advance.
Click to expand...
Click to collapse
Reinstall cwm, wipe data, install cm9/10, wipe data again, reboot. Don't wipe data using stock recovery, only cwm
Sent from my myTouch 4g via Tapatalk
ringnutz said:
Reinstall cwm, wipe data, install cm9/10, wipe data again, reboot. Don't wipe data using stock recovery, only cwm
Sent from my myTouch 4g via Tapatalk
Click to expand...
Click to collapse
i reinstalled cwm , wiped data :
-- wiping data...
formatting /data...
error mounting /data!
skipping format...
formatting /cache...
formatting /sd-ext...
formatting /sdcard/.android_secure...
error mounting /sdcard/.android_secure...!
skipping format...
data wipe complete.
then when i go to choose zip from sd card it gives me " E:Can't mount /sdcard
or if i try choose from internal sdcard : "E:Can't mount /emmc/
Can u please help me ...
thank you in advance
xzard said:
i reinstalled cwm , wiped data :
-- wiping data...
formatting /data...
error mounting /data!
skipping format...
formatting /cache...
formatting /sd-ext...
formatting /sdcard/.android_secure...
error mounting /sdcard/.android_secure...!
skipping format...
data wipe complete.
then when i go to choose zip from sd card it gives me " E:Can't mount /sdcard
or if i try choose from internal sdcard : "E:Can't mount /emmc/
Can u please help me ...
thank you in advance
Click to expand...
Click to collapse
Your EMMC is gone, tipical hard brick ! look at releated thread ....
It's possible you have executed a "Factory reset" from ICS recovery before ?
losteagle said:
Your EMMC is gone, tipical hard brick ! look at releated thread ....
It's possible you have executed a "Factory reset" from ICS recovery before ?
Click to expand...
Click to collapse
i tryed so many options thant i don't remember i've executed that from ICS...
but now the only thing i can access on my TAb is the dowload mode cause if i try recovery gives the mensage " firmware upgrade encountered an issue"
and if i try to flash ICS again with odin it hangs on move to FACTORYFS.IMG and appears the fail menssage on odin.
any kind of help pleasee!???
thanks in advance
xzard said:
i tryed so many options thant i don't remember i've executed that from ICS...
but now the only thing i can access on my TAb is the dowload mode cause if i try recovery gives the mensage " firmware upgrade encountered an issue"
and if i try to flash ICS again with odin it hangs on move to FACTORYFS.IMG and appears the fail menssage on odin.
any kind of help pleasee!???
thanks in advance
Click to expand...
Click to collapse
Right now i've downloaded samfirmware pit file and tryed to flash ICS with that pit file selected and repartition too...
i've succeed to finishing the installation and now i can access to stock recovery. but when i try to turn tab on it hangs on galaxy tab logo !
any idea?
thanks in advance
Have a look at this thread, should work for our device as well
http://forum.xda-developers.com/showthread.php?t=1667886
from my myTouch 4g via Tapatalk
Hi,
After a weekend lost searching for a fix to my problem I've decided to take the Tab to repair at the dealer. my tab has an insurance and i will activate it.
for a small resume, i've scanned for partition errors, having received I/O error on mmcblk9 / 10 / 11.
i tried re-partition without success
at last i 've flashed my tab with pit file modified for devices who have bad sector issues and i nearly succeeded, because get an ICS boot but gave me a message that need to do a data wipe because of some encryption. when i made the wipe with the CWM recovery i get mount /data and /sdcard error...
so once that i have insurance i'll use it .
the bad news is that it can take up to ninety days, i'll prai that does not happen and take much less time.
tks
hello there, i have a serious problem:
i had my a510 with unlocked bootloader and had the CM11 rom installed...so far, so good: all of a sudden when reading a PDF, it shut down, rebooted, went into a bootloop showing the acer logo.
i had also CWM installed, tried EVERYTHING there to erease cache and stuff like that..nothing worked it started flashing a different rom...no success...
i´ve already installed TWPR 2.7.0.0....worked until the point where i wanted to install a new rom...installing works, saying "successful" but in the lower left corner it says:
E: error opening ' /data/tf '
E: error: I/O error
Click to expand...
Click to collapse
can anybody help me please?! this is driving me insane!!
EDIT1:
i tried formatting DATA....after 5 minutes still no luck....it keeps "formatting data". could this be the reason for everything?!
EDIT2:
adb shell
recovery --wipe_data
did the trick!!!! i went back to TWRP, wiped DATA, no errors in /data/tf this time...clean installed CM11...and now it works again
Try to flash back CWM, format every partition (via the advanced menu)
and then flash a ROM like CM11
Shreps said:
Try to flash back CWM, format every partition (via the advanced menu)
and then flash a ROM like CM11
Click to expand...
Click to collapse
i have tried that...it didn´t work....it was stuck formatting...same went with TWRP....
only moving to ADB and sending the --wipe data helped me.
Hello Everyone.
I've Rooted My Lenovo A6000 using ADB.
I was converting an app as system app using TianiumBackup.
Suddenly phone switched off in between the process.
Now its not switching on and showing only first white screen Having Labeled as "Lenovo"..."Powered by Android"..
if i go to recovery menu.. only 4 options showing...
---reboot system now
---apply update from ADB
---wipe data/factory reset
---wipe cache partition
---apply update from sdcard..
i've done wipedata and wipe cache... still its not starting from reboot..
i dnt have ROM Of lenovo A6000... i tried to install Cyanogen Mod ROM from Option apply update from sdcard ...
the process not completes and gives error saying---
"E: footer is wrong"
"E:signature varification failed...installation aborted"
i dnt know whether my phone bricked or not...
pls Help me
You need clockworkmod.. Seems your on the stock recovery. Flash clockwork mod and it'll l work fine
Leave a thanks
Sent from my Lenovo A6000 using XDA Free mobile app
I used cwm recovery method through adb command prompt.
I didnt had backup rom so i installed cm 11 ROM.. and its working fine now.
Sent from my Lenovo K30-T using XDA Free mobile app
Hello Everyone.
I've Rooted My Lenovo A6000 .
I was got system update after intsalling update .
Suddenly phone stuck in start up process after that .
Now its not switching on and showing only first white screen Having Labeled as "Lenovo"..."Powered by Android"..
if i go to recovery menu.. only 4 options showing...
---reboot system now
---apply update from ADB
---wipe data/factory reset
---wipe cache partition
---apply update from sdcard..
i've done wipedata and wipe cache... still its not starting from reboot..
i dnt have ROM Of lenovo A6000... i tried to install new custom rom pacman from Option apply update from sdcard ...
the process not completes and gives error saying---
"E: footer is wrong"
"E:signature varification failed...installation aborted"
i dnt know whether my phone bricked or not...
pls Help me....plzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz
[email protected] said:
Hello Everyone.
I've Rooted My Lenovo A6000 .
I was got system update after intsalling update .
Suddenly phone stuck in start up process after that .
Now its not switching on and showing only first white screen Having Labeled as "Lenovo"..."Powered by Android"..
if i go to recovery menu.. only 4 options showing...
---reboot system now
---apply update from ADB
---wipe data/factory reset
---wipe cache partition
---apply update from sdcard..
i've done wipedata and wipe cache... still its not starting from reboot..
i dnt have ROM Of lenovo A6000... i tried to install new custom rom pacman from Option apply update from sdcard ...
the process not completes and gives error saying---
"E: footer is wrong"
"E:signature varification failed...installation aborted"
i dnt know whether my phone bricked or not...
pls Help me....plzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz
Click to expand...
Click to collapse
It looks like OS has been deleted.
Try to boot in bootloader mode by pressing Vol- or Vol+ and Power button
It will show white Lenovo logo and powered by android under small text written Long press to reboot.
After that try to flash TWRP recovery or any recovery you want. (I suggest TWRP)
Before that download android OS for Lenovo A6000/Plus. (depending on model).
If you are unable to flash TWRP then boot from TWRP this will help you to install OS but at the same time you need to install recovery or else you might face problem next time entering in recovery mode.
First things first, I'm a newbie when it comes to all these.
I installed CM11 after much effort, but some things didn't work out well so afterwards, I installed CM12.1* (FXP-cm-11-20150301-UNOFFICIAL-taoshan).* But then I decided that I wanted to change my Gapps Package, so I went to recovery mode once again to wipe my phone and install CM12 all over again.
The thing is that for some reason I just couldn't wipe it (no error message) but I was able to log in back to the system (CM12).
I messed around with a few settings and finally I decided to install twrp 2.8.7.0 through the flashify app. I rebooted to recovery, tried to wipe again my phone and then, all hell broke loose.
I realized that I cannot wipe internal memory of all things, and cannot install any new ROM. Can't flash another recovery either through windows flashtool like CWM 6.0 Philz touch, for example. Well, it does flash but my phone keeps on logging into the twrp recovery. I also can't flash my original fft (obviously). I can't do really anything besides messing around with twrp options (and I've messed a lot with them). I'm all out of ideas, so please someone help. When trying to wipe internal storage, the following message appears:
E:mkdosfs /dev/block/mmcblk0p32 process ended with ERROR=1
E:Unable to wipe '/sdcard'.
E:Unknown MTP message type: 1
E:Unable to wipe '/sdcard'
I have the whole log, for anyone interested.
Please help and remember, I'm a newbie.
Thank you.
immortalwind said:
First things first, I'm a newbie when it comes to all these.
I installed CM11 after much effort, but some things didn't work out well so afterwards, I installed CM12.1*(FXP-cm-11-20150301-UNOFFICIAL-taoshan).* But then I decided that I wanted to change my Gapps Package, so I went to recovery mode once again to wipe my phone and install CM12 all over again.
The thing is that for some reason I just couldn't wipe it (no error message) but I was able to log in back to the system (CM12).
I messed around with a few settings and finally I decided to install twrp 2.8.7.0 through the flashify app. I rebooted to recovery, tried to wipe again my phone and then, all hell broke loose.
I realized that I cannot wipe internal memory of all things, and cannot install any new ROM. Can't flash another recovery either through windows flashtool like CWM 6.0 Philz touch, for example. Well, it does flash but my phone keeps on logging into the twrp recovery. I also can't flash my original fft (obviously). I can't do really anything besides messing around with twrp options (and I've messed a lot with them). I'm all out of ideas, so please someone help. When trying to wipe internal storage, the following message appears:
E:mkdosfs /dev/block/mmcblk0p32 process ended with ERROR=1
E:Unable to wipe '/sdcard'.
E:Unknown MTP message type: 1
E:Unable to wipe '/sdcard'
I have the whole log, for anyone interested.
Please help and remember, I'm a newbie.
Thank you.
Click to expand...
Click to collapse
try wipe->advanced wipe -> change fs -> ext4
SdtBarbarossa said:
try wipe->advanced wipe -> change fs -> ext4
Click to expand...
Click to collapse
Thank you for your answer my friend, but I actually managed to fix my problem just moments before you posted your answer! What I did was to flash the cm12.1 recovery nightly which logged me into this recovery (although it seemed all messed up and.. broken). Nevertheless, I managed to flash the CM12.1 ROM from there and everything worked fine!
Bro #immortalwind.. I'm having the same problem exactly what you had. Seriously fu***d up with all with boot loop @ recovery. Could not able to hard reset / factory reset at neither CWM nor TWRP. Tried all knows possible ways. Please could you help me here. Any1 who can halp me here pls...
P.S: literally not moving from the boot load, so flashing a ROM could not be possible i think. any other suggestions please.....
RaamXperiaL said:
Bro #immortalwind.. I'm having the same problem exactly what you had. Seriously fu***d up with all with boot loop @ recovery. Could not able to hard reset / factory reset at neither CWM nor TWRP. Tried all knows possible ways. Please could you help me here. Any1 who can halp me here pls...
P.S: literally not moving from the boot load, so flashing a ROM could not be possible i think. any other suggestions please.....
Click to expand...
Click to collapse
Try this out
RaamXperiaL said:
Bro #immortalwind.. I'm having the same problem exactly what you had. Seriously fu***d up with all with boot loop @ recovery. Could not able to hard reset / factory reset at neither CWM nor TWRP. Tried all knows possible ways. Please could you help me here. Any1 who can halp me here pls...
P.S: literally not moving from the boot load, so flashing a ROM could not be possible i think. any other suggestions please.....
Click to expand...
Click to collapse
Just reflash stock ftf. You'll be good to go. If that fails, check drivers and downgrade flashtool. After that, normally, install a boot image with a recovery, install your rom gapps, reboot.
Managed to flash.ftf... Thanks for the help friends.
Sent from my C2104 using XDA Free mobile app