moto g custom rom install problem - Moto G Q&A, Help & Troubleshooting

hello friends ,
my Moto G does not finish booting after the installation cynogenmod . It keeps rebooting all the time.
I installed it first from the Settings menu and then tried it again with an installation from recovery CWM v6.0.4.6 It always just shows the CM logo with the rotating arrow i wait 2 min. after 2 hours but rotatin arrow rounding continuous phone does not start help me plz guys
now what can i do?
proceser what i do?
first install cwm
after
wipe data factory reset
wipe cache partion
wipe dalvik cache
after install from sd
instalation completed but
after roboot cm logo is rotating continue
after i change second rom but same problem
i use cabon rom but carbon logo rotate continue
i tryied 3 types of rom but problem not solved plz suggest me

Did you wipe system as well?

rashmin94 said:
hello friends ,
my Moto G does not finish booting after the installation cynogenmod . It keeps rebooting all the time.
I installed it first from the Settings menu and then tried it again with an installation from recovery CWM v6.0.4.6 It always just shows the CM logo with the rotating arrow i wait 2 min. after 2 hours but rotatin arrow rounding continuous phone does not start help me plz guys
now what can i do?
proceser what i do?
first install cwm
after
wipe data factory reset
wipe cache partion
wipe dalvik cache
after install from sd
instalation completed but
after roboot cm logo is rotating continue
after i change second rom but same problem
i use cabon rom but carbon logo rotate continue
i tryied 3 types of rom but problem not solved plz suggest me
Click to expand...
Click to collapse
Carbon Rom has just lead to trouble as far as i can see. You will need to flash the firmware follow this guide: http://forum.xda-developers.com/showthread.php?t=2542219 and remember to input the fastboot commands MANUALLY

Related

[Q] CM white screen fade issue :(

Hey guys I really need help !!!!
I tried flashing all CM versions available using all CWM versions , Wiped Data,Cache and Dalvik cache before and after flashing I even tried using another Memory SD card I also flashed CM over stock & many versions of custom roms after rooting & installing CWM
But what happens is that when flashing is done & I choose (reboot system now) I got SAMSUNG logo then A white screen fade (Boot loop) :crying:
then nothing happens But I still can get into recovery & download mode but the phone doesn't boot
I really need to know why does that happen ????!!!!!!!
7mesa said:
Hey guys I really need help !!!!
I tried flashing all CM versions available using all CWM versions , Wiped Data,Cache and Dalvik cache before and after flashing I even tried using another Memory SD card I also flashed CM over stock & many versions of custom roms after rooting & installing CWM
But what happens is that when flashing is done & I choose (reboot system now) I got SAMSUNG logo then A white screen fade (Boot loop) :crying:
then nothing happens But I still can get into recovery & download mode but the phone doesn't boot
I really need to know why does that happen ????!!!!!!!
Click to expand...
Click to collapse
If still entering into download mode means there is no hard brick
This happens often and no need to worry
If you want to fix this just replace the boot.img in your custom rom by the boot.img of your stock rom than wipe everything and flash
Or if you have a backup of your stock rom system restore the boot from cwm

[Completed] [Q] s2 stuck on boot screen after installing new rom

i have downloaded cyanogenomod and put it into external card.
i have rooted my phone. i.e Cyanogenomod 9
then i made through tht vol. up key + homekey + powerkey
selected backup. it did backup my system then came to data, after that some error occured !
i continued installing cyanogenomod it installed correctly.
after that i installed gapps. again some error occured but i have got that problem is of gapps. different version
but after i rebooted it is getting stuck on boot screen for very long time!
i waited for a long enough. i.e for minimum 2 hours. but installing never finished!!!
now i have reset my very first backup!! and again on rooted phone!!
i want to install cyanogenomod or aokp ROM!!
<<<<some sites are saying to wipe cache partition and wipe data/factory reset>>>> i dont about this<<>>>
will data/factory reset delete my whatsapp messages but i have now moved the backups to my external card!!
PLZZZZ HELP! ASAP!
Hi
Thanks for writing to us at XDA Assist. Which variant of the S2 do you have?
No response in two days, thread closed.

Cannot Flash CM 14 on YU Yunique.. keep on booting.

Hello... i hv YU YUNIQUE mobile... i hd stock rom on it... recently i hv rooted it and flash twrp recovery on it... i ws suppose to flash cynogenmod 14.1 on it which i hv got from XDA forum only.... i flashed the the TWRP recovery first and thn i wiped the whole cache and internal data and flashed CM14.1 rom which i got from XDA and also gapps package.... it got flashed.. recovery showed installation/flash successful.. thn i choosed system reboot.. the phone went into booting process.. the phone gets stuck on booting process.. the cynogen boot logo keeps on blinking but i cant get the setup wizard or the home screen on the phone... if i keep holding the power key it reboots again and remains on the booting process only.....
i m able to open the TWRP recovery.... if i repeat the procees again it does the same thing, keeps on booting.... i tried adb side load stiil it does the same... wt shld i do... wt method shld i use..... plz help....
Sairaj3 said:
Hello... i hv YU YUNIQUE mobile... i hd stock rom on it... recently i hv rooted it and flash twrp recovery on it... i ws suppose to flash cynogenmod 14.1 on it which i hv got from XDA forum only.... i flashed the the TWRP recovery first and thn i wiped the whole cache and internal data and flashed CM14.1 rom which i got from XDA and also gapps package.... it got flashed.. recovery showed installation/flash successful.. thn i choosed system reboot.. the phone went into booting process.. the phone gets stuck on booting process.. the cynogen boot logo keeps on blinking but i cant get the setup wizard or the home screen on the phone... if i keep holding the power key it reboots again and remains on the booting process only.....
i m able to open the TWRP recovery.... if i repeat the procees again it does the same thing, keeps on booting.... i tried adb side load stiil it does the same... wt shld i do... wt method shld i use..... plz help....
Click to expand...
Click to collapse
Is the ROM you are flashing made for your specific model number? Are you using the newest version of TWRP that you can find? Are you factory resetting, wiping cache and dalvik when you flash? Have you tried doing an advanced wipe in TWRP to wipe system partition and data partition and then flashing your ROM then wiping cache and dalvik after you flash?
Sent from my SCH-I535 using Tapatalk
i flashed the latest twrp recovery.... i downloaded the rom which is made for my phone model only...
Steps:
Wipe dalvik cache,cache,data,system.
Installing rom zip and then gapps zip.
Reboot system.
After flashing devices stuck in boot loop....
Sairaj3 said:
i flashed the latest twrp recovery.... i downloaded the rom which is made for my phone model only...
Steps:
Wipe dalvik cache,cache,data,system.
Installing rom zip and then gapps zip.
Reboot system.
After flashing devices stuck in boot loop....
Click to expand...
Click to collapse
Lollipop, marshmallow and nougat van take up to 30 minutes to boot the first time, are you giving it time to load or are you just getting impatient?
Sent from my SCH-I535 using Tapatalk
Droidriven said:
Lollipop, marshmallow and nougat van take up to 30 minutes to boot the first time, are you giving it time to load or are you just getting impatient?
Sent from my SCH-I535 using Tapatalk
Click to expand...
Click to collapse
ok...bt two times i kpt it for ovr night also still didnt wrk... bt wt is the best procedure to flash rom... meaning, which data should be wiped, shld i wipe sytem data also, after flashing the rom n gapps also i hv to wipe cache, etc......
Sairaj3 said:
ok...bt two times i kpt it for ovr night also still didnt wrk... bt wt is the best procedure to flash rom... meaning, which data should be wiped, shld i wipe sytem data also, after flashing the rom n gapps also i hv to wipe cache, etc......
Click to expand...
Click to collapse
To be thorough and make sure you miss nothing, I suggest these steps:
1)in TWRP, tap the Wipe button, then it should say at the top of the screen: "factory reset, wipe cache and wipe dalvik". Swipe the slider to do the wipe.
2)after wiping, tap the home button in TWRP, on TWRP home screen, tap the Wipe button again, then tap the advanced wipe option, wipe system and data.
3)tap home button, on home screen, tap install then flash your ROM and Gapps.
4)after flashing ROM and Gapps, wipe cache and dalvik(do not factory reset).
5)reboot.
Sent from my SCH-I535 using Tapatalk

Galaxy SII stuck at cyanogenmod logo during boot. Help!

Here's what I did:
Tried flashing CM 12.1. Odin -> CWM Recovery -> InstalledCM -> Installed SuperSU ->Installed Gapps
I got the " fix root yes or no error". Turns out I had to use SuperSU v 1.55. Problem solved.
" Rebooting might install stock ROM" Choose Yes or No. Turns out it didn't matter so I chose Yes.
It was all good until it got stuck at the blue cyanogenmod logo while rebooting. I've tried booting into recovery, wiping all data, cache partition and the dalvik cache to no avail. Help.
Hi !
There are plenty of cm 12.1 roms for your device here , one of them is this one https://forum.xda-developers.com/ga.../rom-cyanogenmod-12-1-nightly-builds-t3147661, try it out .
Good luck !

Twrp doesn't flashing my rom

Why every time I flash RR 7 rom or any thing on my lenovo a6020a46 by twrp it doesn't flashing and the twrp restarts . it writes only first two lines after I swipe to flash and then go black and restarts. Can anyone tell me what's wrong. Thnx
TWRP Doesn't flash your rom
Hi , try do do Factory Reset , and also wipe cache .

Categories

Resources