Twrp doesn't flashing my rom - General Questions and Answers

Why every time I flash RR 7 rom or any thing on my lenovo a6020a46 by twrp it doesn't flashing and the twrp restarts . it writes only first two lines after I swipe to flash and then go black and restarts. Can anyone tell me what's wrong. Thnx

TWRP Doesn't flash your rom
Hi , try do do Factory Reset , and also wipe cache .

Related

[Q] Unable to boot Custom ROM

I have a Galaxy fit with unrooted official 2.3.6.
Yesterday i tried to flash custom rom first time.
i am following normal guide
1. Flashed recovery with ODIN (CWM_rfs file)
2.Wipe data/cache/dalvik cache and format System
3.Install custom ROM.
4.Again wipe data/cacje/dalvik.
5.Reboot.
6.Wait 10 minuts
But every time i stuck on boot screen (Android text).
This is first time i am flashing custom rom on my fit.
I tried 3 roms but no luck
1.aokp v9 Nightly by Ravi H Basawa
2.cm-7-20121104-NIGHTLY-s5670
3.cm-10.1-20130216-NIGHTLY-beni
Please guide me in right direction.
Please replay. 46 views and no replay.
I am waiting for solution
Flash official firmware first and then try to install cwm n custom rom dude..while flashing rom did u get any message in recovery?
Thank You for replay.
Few min ago i solved it.
I think i was using wrong recovery (CWM rfs).
It is for rfs system ROMs
May help anyone
1. Flash recovery with ODIN (beni_cwm-5_ext4_v2)
2. Wipe data/cache/dalvik and format system in mount settings.
3. After system format , mount system.
4. Install ROM
5. Wipe data and cache
6. reboot and new rom will boot with in 4 min.
Glad u helped yourself :good:

[Q] CM white screen fade issue :(

Hey guys I really need help !!!!
I tried flashing all CM versions available using all CWM versions , Wiped Data,Cache and Dalvik cache before and after flashing I even tried using another Memory SD card I also flashed CM over stock & many versions of custom roms after rooting & installing CWM
But what happens is that when flashing is done & I choose (reboot system now) I got SAMSUNG logo then A white screen fade (Boot loop) :crying:
then nothing happens But I still can get into recovery & download mode but the phone doesn't boot
I really need to know why does that happen ????!!!!!!!
7mesa said:
Hey guys I really need help !!!!
I tried flashing all CM versions available using all CWM versions , Wiped Data,Cache and Dalvik cache before and after flashing I even tried using another Memory SD card I also flashed CM over stock & many versions of custom roms after rooting & installing CWM
But what happens is that when flashing is done & I choose (reboot system now) I got SAMSUNG logo then A white screen fade (Boot loop) :crying:
then nothing happens But I still can get into recovery & download mode but the phone doesn't boot
I really need to know why does that happen ????!!!!!!!
Click to expand...
Click to collapse
If still entering into download mode means there is no hard brick
This happens often and no need to worry
If you want to fix this just replace the boot.img in your custom rom by the boot.img of your stock rom than wipe everything and flash
Or if you have a backup of your stock rom system restore the boot from cwm

moto g custom rom install problem

hello friends ,
my Moto G does not finish booting after the installation cynogenmod . It keeps rebooting all the time.
I installed it first from the Settings menu and then tried it again with an installation from recovery CWM v6.0.4.6 It always just shows the CM logo with the rotating arrow i wait 2 min. after 2 hours but rotatin arrow rounding continuous phone does not start help me plz guys
now what can i do?
proceser what i do?
first install cwm
after
wipe data factory reset
wipe cache partion
wipe dalvik cache
after install from sd
instalation completed but
after roboot cm logo is rotating continue
after i change second rom but same problem
i use cabon rom but carbon logo rotate continue
i tryied 3 types of rom but problem not solved plz suggest me
Did you wipe system as well?
rashmin94 said:
hello friends ,
my Moto G does not finish booting after the installation cynogenmod . It keeps rebooting all the time.
I installed it first from the Settings menu and then tried it again with an installation from recovery CWM v6.0.4.6 It always just shows the CM logo with the rotating arrow i wait 2 min. after 2 hours but rotatin arrow rounding continuous phone does not start help me plz guys
now what can i do?
proceser what i do?
first install cwm
after
wipe data factory reset
wipe cache partion
wipe dalvik cache
after install from sd
instalation completed but
after roboot cm logo is rotating continue
after i change second rom but same problem
i use cabon rom but carbon logo rotate continue
i tryied 3 types of rom but problem not solved plz suggest me
Click to expand...
Click to collapse
Carbon Rom has just lead to trouble as far as i can see. You will need to flash the firmware follow this guide: http://forum.xda-developers.com/showthread.php?t=2542219 and remember to input the fastboot commands MANUALLY

flashing cm11

today i flashed cm11 (kronflux rom) , it flashed successfully but on first boot rom stuck and still loading for more than 30 mins and nth happened still the blue circle , i tried to wipe data , wipe cache , wipe divlik , and flash boot.img from rom file , what should i do to work the rom
btw i'm using cwm v v6.0.4.9​

Cannot Flash CM 14 on YU Yunique.. keep on booting.

Hello... i hv YU YUNIQUE mobile... i hd stock rom on it... recently i hv rooted it and flash twrp recovery on it... i ws suppose to flash cynogenmod 14.1 on it which i hv got from XDA forum only.... i flashed the the TWRP recovery first and thn i wiped the whole cache and internal data and flashed CM14.1 rom which i got from XDA and also gapps package.... it got flashed.. recovery showed installation/flash successful.. thn i choosed system reboot.. the phone went into booting process.. the phone gets stuck on booting process.. the cynogen boot logo keeps on blinking but i cant get the setup wizard or the home screen on the phone... if i keep holding the power key it reboots again and remains on the booting process only.....
i m able to open the TWRP recovery.... if i repeat the procees again it does the same thing, keeps on booting.... i tried adb side load stiil it does the same... wt shld i do... wt method shld i use..... plz help....
Sairaj3 said:
Hello... i hv YU YUNIQUE mobile... i hd stock rom on it... recently i hv rooted it and flash twrp recovery on it... i ws suppose to flash cynogenmod 14.1 on it which i hv got from XDA forum only.... i flashed the the TWRP recovery first and thn i wiped the whole cache and internal data and flashed CM14.1 rom which i got from XDA and also gapps package.... it got flashed.. recovery showed installation/flash successful.. thn i choosed system reboot.. the phone went into booting process.. the phone gets stuck on booting process.. the cynogen boot logo keeps on blinking but i cant get the setup wizard or the home screen on the phone... if i keep holding the power key it reboots again and remains on the booting process only.....
i m able to open the TWRP recovery.... if i repeat the procees again it does the same thing, keeps on booting.... i tried adb side load stiil it does the same... wt shld i do... wt method shld i use..... plz help....
Click to expand...
Click to collapse
Is the ROM you are flashing made for your specific model number? Are you using the newest version of TWRP that you can find? Are you factory resetting, wiping cache and dalvik when you flash? Have you tried doing an advanced wipe in TWRP to wipe system partition and data partition and then flashing your ROM then wiping cache and dalvik after you flash?
Sent from my SCH-I535 using Tapatalk
i flashed the latest twrp recovery.... i downloaded the rom which is made for my phone model only...
Steps:
Wipe dalvik cache,cache,data,system.
Installing rom zip and then gapps zip.
Reboot system.
After flashing devices stuck in boot loop....
Sairaj3 said:
i flashed the latest twrp recovery.... i downloaded the rom which is made for my phone model only...
Steps:
Wipe dalvik cache,cache,data,system.
Installing rom zip and then gapps zip.
Reboot system.
After flashing devices stuck in boot loop....
Click to expand...
Click to collapse
Lollipop, marshmallow and nougat van take up to 30 minutes to boot the first time, are you giving it time to load or are you just getting impatient?
Sent from my SCH-I535 using Tapatalk
Droidriven said:
Lollipop, marshmallow and nougat van take up to 30 minutes to boot the first time, are you giving it time to load or are you just getting impatient?
Sent from my SCH-I535 using Tapatalk
Click to expand...
Click to collapse
ok...bt two times i kpt it for ovr night also still didnt wrk... bt wt is the best procedure to flash rom... meaning, which data should be wiped, shld i wipe sytem data also, after flashing the rom n gapps also i hv to wipe cache, etc......
Sairaj3 said:
ok...bt two times i kpt it for ovr night also still didnt wrk... bt wt is the best procedure to flash rom... meaning, which data should be wiped, shld i wipe sytem data also, after flashing the rom n gapps also i hv to wipe cache, etc......
Click to expand...
Click to collapse
To be thorough and make sure you miss nothing, I suggest these steps:
1)in TWRP, tap the Wipe button, then it should say at the top of the screen: "factory reset, wipe cache and wipe dalvik". Swipe the slider to do the wipe.
2)after wiping, tap the home button in TWRP, on TWRP home screen, tap the Wipe button again, then tap the advanced wipe option, wipe system and data.
3)tap home button, on home screen, tap install then flash your ROM and Gapps.
4)after flashing ROM and Gapps, wipe cache and dalvik(do not factory reset).
5)reboot.
Sent from my SCH-I535 using Tapatalk

Categories

Resources