i have downloaded cyanogenomod and put it into external card.
i have rooted my phone. i.e Cyanogenomod 9
then i made through tht vol. up key + homekey + powerkey
selected backup. it did backup my system then came to data, after that some error occured !
i continued installing cyanogenomod it installed correctly.
after that i installed gapps. again some error occured but i have got that problem is of gapps. different version
but after i rebooted it is getting stuck on boot screen for very long time!
i waited for a long enough. i.e for minimum 2 hours. but installing never finished!!!
now i have reset my very first backup!! and again on rooted phone!!
i want to install cyanogenomod or aokp ROM!!
<<<<some sites are saying to wipe cache partition and wipe data/factory reset>>>> i dont about this<<>>>
will data/factory reset delete my whatsapp messages but i have now moved the backups to my external card!!
PLZZZZ HELP! ASAP!
Hi
Thanks for writing to us at XDA Assist. Which variant of the S2 do you have?
No response in two days, thread closed.
Related
Good evening. The roblem with m phone started as follows. After a phone call, the phone stuck and turned in black screen. After this, to restart the device took off the battery and started till the logo of HUAWEI. Also refer to that from the first time I had rooted the device, had unlock the bootloader and had passed the CMWwith instructions from www.huaweig300.com, successfully. One week earlier than the problem I had take a backup through CMW. At this time I have access to pink screen and CMW. I tried to setup ICS (UPDATE.APP) from the site of the companybut always crashes at this point and never finishes (pic 1). When I try to restore via CMW keep getting error in partition. I cann not do wipe data/factory reset, wipe cache partition, wipe dalvik cache. These are the errors that show at CMW (pic 2).
Can somone help me please?
ps: can i use my guarantee after all this?
So i rooted my tablet about a week ago and went to install adaway today when i went to reboot it it got stuck in a loop and so i tried a factory reset but now its in a loop of starting, saying upgrading apps, then saying process com.android.phone has stopped working then restarting again and keeps going what can i do to fix it?
CarsonM135 said:
So i rooted my tablet about a week ago and went to install adaway today when i went to reboot it it got stuck in a loop and so i tried a factory reset but now its in a loop of starting, saying upgrading apps, then saying process com.android.phone has stopped working then restarting again and keeps going what can i do to fix it?
Click to expand...
Click to collapse
You Should flash the stock firmware through Odin . Your data will not be erased .
Don't forget to press the thanks button :good::good::good:
Really! Flash to stock just for a bootloop. Unnecessary I think. I would just go to recovery and wipe system, cache, and dalvik and reflash the ROM. If that doesn't fix, then do the same but wipe data as well. You'll have to reinstall apps of course with that last one. Also, If you have an external sd card and a card reader, you could download a different ROM to the card and flash that one in recovery.
Lol
wolfclan68 said:
Really! Flash to stock just for a bootloop. Unnecessary I think. I would just go to recovery and wipe system, cache, and dalvik and reflash the ROM. If that doesn't fix, then do the same but wipe data as well. You'll have to reinstall apps of course with that last one. Also, If you have an external sd card and a card reader, you could download a different ROM to the card and flash that one in recovery.
Click to expand...
Click to collapse
Flashing to stock always fix bugs that wiping can't solve
Because flashing to stock will restores the original firmware :good:
Sent from Gallifrey using TARDIS
hello friends ,
my Moto G does not finish booting after the installation cynogenmod . It keeps rebooting all the time.
I installed it first from the Settings menu and then tried it again with an installation from recovery CWM v6.0.4.6 It always just shows the CM logo with the rotating arrow i wait 2 min. after 2 hours but rotatin arrow rounding continuous phone does not start help me plz guys
now what can i do?
proceser what i do?
first install cwm
after
wipe data factory reset
wipe cache partion
wipe dalvik cache
after install from sd
instalation completed but
after roboot cm logo is rotating continue
after i change second rom but same problem
i use cabon rom but carbon logo rotate continue
i tryied 3 types of rom but problem not solved plz suggest me
Did you wipe system as well?
rashmin94 said:
hello friends ,
my Moto G does not finish booting after the installation cynogenmod . It keeps rebooting all the time.
I installed it first from the Settings menu and then tried it again with an installation from recovery CWM v6.0.4.6 It always just shows the CM logo with the rotating arrow i wait 2 min. after 2 hours but rotatin arrow rounding continuous phone does not start help me plz guys
now what can i do?
proceser what i do?
first install cwm
after
wipe data factory reset
wipe cache partion
wipe dalvik cache
after install from sd
instalation completed but
after roboot cm logo is rotating continue
after i change second rom but same problem
i use cabon rom but carbon logo rotate continue
i tryied 3 types of rom but problem not solved plz suggest me
Click to expand...
Click to collapse
Carbon Rom has just lead to trouble as far as i can see. You will need to flash the firmware follow this guide: http://forum.xda-developers.com/showthread.php?t=2542219 and remember to input the fastboot commands MANUALLY
Cannot wipe "/Data" & "/Dalvik" and TWRP is asking for Password [Solved]
Hey Guys!
So a few days ago i decided to install and try out the ubuntu touch. My Android OS was the newest CM-11 Nightly edition of the TF700t , but because it was not compatible with dual boot I wiped it out. Then I done everything as it was ordered and finally i had may Touch and my "TF700T_CROMBi-kk_RC2 KitKat-4.4.4rc2-CM11-D". Everything was perfect and there was no problem , then I wiped out the whole thing , because I dosen't liked the touch (from the beginning it was just about trying it out) and reinstalled the "TF700T_CROMBi-kk_RC2 KitKat-4.4.4rc2-CM11-D". For like a day there was no problem at all , then i turned off the tablet (before this shutdown there was like 3-4 restart) and when I turned it back 9 hours later the OS just restated it self when I tried to enter. The TWRP is asked for a password (I didn't setup any kind of security for my TWRP) so it was kinda odd. When I tried to restore my backup it's was a fail , also when I tried to wipe out the system "failed" , because the recovery system was unable to wipe the "/dalvik" and "/data" and neither can mount the "/data". I tried to update the TWRP via fastboot but my PC stays at "waiting for device". I appreciate any kind of suggestion and help , pls guys help I'm out of ideas .
TWRP version: 2.6.3.2
TWRP asks for a password if it can't read the file system on /data and so it assumes it's encrypted.
Sounds as if you corrupted your data partition somewhere in this. Try to format data (not wipe) in TWRP. This would erase all your data on the tablet, but you got that backed up anyway, right?
I swear to god that I tried this too , but it's worked. Thanks for the help.
Hi Guys,
I found evertyhign started to crash one day all the apps and msgs start to popup e,g this and this process has stopped.
First i went to recovery and Wipe advanced ( Delvik , Cache , Data , System) it wiped it fast and sucessfull but when i boot to rom my corupted rom is still there where my SD card is full wiped and blank( i had my rom in it) .
I tried to wipe flash anything using recovery TWRP 2.8 everything says sucessfull but nothing happes still old corupted rom.
I went to Factory mod and try to clear eMMC but when i press to clear it shows Formating/Data and then reboot right quickly.
I m so fadeup with this since for past 2 days i tried each and everysingle thing menioted on any forum.
Kkindly see the video in youtube to understand more of the problem.
Please Help