Hi Guys.
I am new to Android and XDA so please HELP.
I am from India. I own a galaxy tab 2 P3100 which was purchased from Singapore. However one day suddenly it got stuck in boot-loop while I was switching it on. I too it the same day to Samsung Care, but they were not able to do anything.
When they returned my tab there was black screen and error - firmware update encounter an issue please connect to kies.
Soon after that I started Reading XDA threads and downloaded 3-4 stock ROM of Samsung tab of different different regions - India, Taiwan, Germany, etc. All ROMs were 4.1.2 Android. I tried flashing them on my tab using Odin 3.09. I started with Taiwan it failed at hidden.img. Same with german and Indian.
Then after installing Indian ROM I also installed CWM recovery and and booted my device normally. It booted without any problem. However as soon as it started the whole screen was white with only back button and an error - Encryption Failed and contained a button called- factory reset.
When I click the button the device powers off and reboots in recovery and do a hard reset with lots of error. However after doing so there is no effect on the error.
Please help.
cyprien_dcunha said:
Hi Guys.
I am new to Android and XDA so please HELP.
I am from India. I own a galaxy tab 2 P3100 which was purchased from Singapore. However one day suddenly it got stuck in boot-loop while I was switching it on. I too it the same day to Samsung Care, but they were not able to do anything.
When they returned my tab there was black screen and error - firmware update encounter an issue please connect to kies.
Soon after that I started Reading XDA threads and downloaded 3-4 stock ROM of Samsung tab of different different regions - India, Taiwan, Germany, etc. All ROMs were 4.1.2 Android. I tried flashing them on my tab using Odin 3.09. I started with Taiwan it failed at hidden.img. Same with german and Indian.
Then after installing Indian ROM I also installed CWM recovery and and booted my device normally. It booted without any problem. However as soon as it started the whole screen was white with only back button and an error - Encryption Failed and contained a button called- factory reset.
When I click the button the device powers off and reboots in recovery and do a hard reset with lots of error. However after doing so there is no effect on the error.
Please help.
Click to expand...
Click to collapse
my indian brother
here is a solution
first boot into recovery then wipe cache partition and then factory reset it
then switch it off
open odin
flash indian frimware and then see if it is working or not
aditya rathee said:
my indian brother
here is a solution
first boot into recovery then wipe cache partition and then factory reset it
then switch it off
open odin
flash indian frimware and then see if it is working or not
Click to expand...
Click to collapse
First I wiped cache partition
It was done without any error.
Then I selected wipe data/factory reset. I got this-
--Wiping data......
Formatting /data.....
Error mounting /data!
Skipping format......
Formatting /cache....
Formatting /sd-ext....
Formatting /sdcard/.android_secure......
Error mounting /sdcard/.android_secure!
Skipping format....
Data wipe complete.
Even with this error I again installed Indian Firmware using odin and there was no change.
Plz help!
cyprien_dcunha said:
First I wiped cache partition
It was done without any error.
Then I selected wipe data/factory reset. I got this-
--Wiping data......
Formatting /data.....
Error mounting /data!
Skipping format......
Formatting /cache....
Formatting /sd-ext....
Formatting /sdcard/.android_secure......
Error mounting /sdcard/.android_secure!
Skipping format....
Data wipe complete.
Even with this error I again installed Indian Firmware using odin and there was no change.
Plz help!
Click to expand...
Click to collapse
do you also change some settings in odin like checking or unchecking the re partition option ??
also by default is re partition checked or unchecked ??
I have already tried different different options.
My Custom ROM count is over 40.
Nothing has happened yet.
So please help.
Which recovery do you have??
Latest ClockWorkMod
Hello guys, i have Moto G 1st Gen. Indian version (XT1033) running android 5.0.2... Yesterday i rooted my moto g by unlocking bootloader and flashing TWRP 2.8.6.0-XT1032 & SuperSU 2.45... During the process there was some error (like general unlock failure, wipe partition failure etc). I ignored them and continued... It was booted normally... Then i installed Root Checker and confirmed that root has been done successfully....
After that i tried to make a Nandroid backup using TWRP. Message popped up saying that backup is successful.. Then i pressed reboot system. Then it went into bootloop (stuck at bootloader unlocked warning message). :crying:
When this happened, i thought to flash recovery again and flash stock rom. By the time i downloaded stock rom, the phone discharged completely. Now the phone is not charging I have tried using usb charging through pc and using socket charger, but it's stuck at 0%... (I have kept it for hours) Sometime it try to boot and bootloader unlocked warning appears and stuck there.. after sometime it again go into battery charging logo with 0% and then repeat the process again.. When i try using usb cable, the same cycle continues with frequent connecting and disconnecting... :crying:
What to do now ? I guess it's not possible to flash stock rom without any charge... How to charge my phone ? What other option(s) do i have ?
PS : Sorry if this has been already discussed.
savvy54 said:
Hello guys, i have Moto G 1st Gen. Indian version (XT1033) running android 5.0.2... Yesterday i rooted my moto g by unlocking bootloader and flashing TWRP 2.8.6.0-XT1032 & SuperSU 2.45... During the process there was some error (like general unlock failure, wipe partition failure etc). I ignored them and continued... It was booted normally... Then i installed Root Checker and confirmed that root has been done successfully....
After that i tried to make a Nandroid backup using TWRP. Message popped up saying that backup is successful.. Then i pressed reboot system. Then it went into bootloop (stuck at bootloader unlocked warning message). :crying:
When this happened, i thought to flash recovery again and flash stock rom. By the time i downloaded stock rom, the phone discharged completely. Now the phone is not charging I have tried using usb charging through pc and using socket charger, but it's stuck at 0%... (I have kept it for hours) Sometime it try to boot and bootloader unlocked warning appears and stuck there.. after sometime it again go into battery charging logo with 0% and then repeat the process again.. When i try using usb cable, the same cycle continues with frequent connecting and disconnecting... :crying:
What to do now ? I guess it's not possible to flash stock rom without any charge... How to charge my phone ? What other option(s) do i have ?
PS : Sorry if this has been already discussed.
Click to expand...
Click to collapse
You must not use TWRP from its official site
Those people have not fixed this ****ty bug and many people have got bootloops due to this including me
Use the one available in xda
Solution-
Try to boot the phone in bootloader mode
Whenever the device shows the moto logo immediately press and hold power button and as soon as the screen goes black immediately press and hold power + volume down bottom and it should boot into bootloader
Charge the phone through a USB in bootloader mode
And then either flash the stock firmware again or use custom ROMs
Sent from falcon
PRESS THANKS IF HELPED?????
Okk, i was able to go into bootloader mode and charge through usb cable.. But, since then i am trying again & again to flash a rom to get my phone working but everytime something is going wrong.. First i tried to flash stock rom but it was frequently rebooting. So then i tried to flash Resurrection Remix : now it's stuck at RR logo screen for 2 hrs.. Don't know what am i doing wrong ... I am very much frustrated right now... I am now thinking to flash optimised stock rom... Some help from your side will be very helpfull :
1. Please tell me which recovery to use for peace of mind and please give me link for that.
2. I am thinking to use This stock rom to flash. ( I am facing problem with untouched version) Please tell me the exact procedure . Flash recovery > Wipe cache, dalvik, system,data in recovery > Flash rom and then do i need to flash the radio version ? And if i want to root, can i flash SuperSU after that ?
Please Note : I know that what i am asking can be found after a little bit of searching. But i have wasted 4 days and still remaining at the the same spot. Your 15 minutes time can save my another 4 days and put away my frustration i am facing right now. I am asking this because i have gone into such a state that i am thinking of throwing my phone and sleeep right away.. Please do me a favor.
My phone : Moto G 1st Gen. ( XT1033 ) , Lollipop 5.0.2, Bootloader unlocked
savvy54 said:
Okk, i was able to go into bootloader mode and charge through usb cable.. But, since then i am trying again & again to flash a rom to get my phone working but everytime something is going wrong.. First i tried to flash stock rom but it was frequently rebooting. So then i tried to flash Resurrection Remix : now it's stuck at RR logo screen for 2 hrs.. Don't know what am i doing wrong ... I am very much frustrated right now... I am now thinking to flash optimised stock rom... Some help from your side will be very helpfull :
1. Please tell me which recovery to use for peace of mind and please give me link for that.
2. I am thinking to use This stock rom to flash. ( I am facing problem with untouched version) Please tell me the exact procedure . Flash recovery > Wipe cache, dalvik, system,data in recovery > Flash rom and then do i need to flash the radio version ? And if i want to root, can i flash SuperSU after that ?
Please Note : I know that what i am asking can be found after a little bit of searching. But i have wasted 4 days and still remaining at the the same spot. Your 15 minutes time can save my another 4 days and put away my frustration i am facing right now. I am asking this because i have gone into such a state that i am thinking of throwing my phone and sleeep right away.. Please do me a favor.
My phone : Moto G 1st Gen. ( XT1033 ) , Lollipop 5.0.2, Bootloader unlocked
Click to expand...
Click to collapse
Link to recovery
http://forum.xda-developers.com/showthread.php?p=57672469
You MUST use the stock version 2.8.6.0 ( do not use the gpe version)
Do not use 2.8.6.0.1 ( it still has bugs)
Flash the recovery through fastboot
Then one by one wipe the following and tell me if any error occurs
System
Data
Cache
Dalvik cache
You must report back the error that comes in recovery logs when you wipe these partitions
Report back
Sent from falcon
PRESS THANKS IF HELPED?????
sjandroiddeveloper said:
Then one by one wipe the following and tell me if any error occurs
System
Data
Cache
Dalvik cache
You must report back the error that comes in recovery logs when you wipe these partitions
Click to expand...
Click to collapse
1. System Formatting system using make_ext4fs function.
Updating partition details.....
E: unable to stat '/data/property/.temp.sx2jrN/.last_install_path
E: unable to stat '/data/property/.temp.Md9EXT
E: unable to stat '/data/property/.temp.cCjJv7/0
E: unable to stat '/data/property/.temp.cCjJv7/legacy
E: unable to stat '/data/property/.temp.cCjJv7/0
E: unable to stat '/data/property/.temp.cCjJv7/legacy
E: unable to stat '/data/property/.temp.cCjJv7/0
E: unable to stat '/data/property/.temp.cCjJv7/ legacy
E: unable to stat '/data/property/.temp.cCjJv7/0
E: unable to stat '/data/property/.temp.cCjJv7/legacy
E: unable to stat '/data/property/.temp.9107E0
E: unable to stat '/data/property/.temp.DpW8n7
E: unable to stat '/data/property/.temp.EXVJvT
E: unable to stat '/data/property/.temp.gKptm9
E: unable to stat '/data/property/.temp. Ab0nvs
2. Data Wiping data without wiping /data/media.....
Done
Updating partition details.....
Same error as above
3. Cache and 4. Dalvik cache Same error showed up after wiping cache and Dalvik cache (wipe complete, error during updating partition...)
PS : I think this error was not present when i tried flashing stock rom or RR rom
Update Today i tried installing optimised stock rom through usb otg... Following error occured :
E; Error executing updater binary in zip <zip name> followed by same error in upadating partrition as above..
savvy54 said:
1. System Formatting system using make_ext4fs function.
Updating partition details.....
E: unable to stat '/data/property/.temp.sx2jrN/.last_install_path
E: unable to stat '/data/property/.temp.Md9EXT
E: unable to stat '/data/property/.temp.cCjJv7/0
E: unable to stat '/data/property/.temp.cCjJv7/legacy
E: unable to stat '/data/property/.temp.cCjJv7/0
E: unable to stat '/data/property/.temp.cCjJv7/legacy
E: unable to stat '/data/property/.temp.cCjJv7/0
E: unable to stat '/data/property/.temp.cCjJv7/ legacy
E: unable to stat '/data/property/.temp.cCjJv7/0
E: unable to stat '/data/property/.temp.cCjJv7/legacy
E: unable to stat '/data/property/.temp.9107E0
E: unable to stat '/data/property/.temp.DpW8n7
E: unable to stat '/data/property/.temp.EXVJvT
E: unable to stat '/data/property/.temp.gKptm9
E: unable to stat '/data/property/.temp. Ab0nvs
2. Data Wiping data without wiping /data/media.....
Done
Updating partition details.....
Same error as above
3. Cache and 4. Dalvik cache Same error showed up after wiping cache and Dalvik cache (wipe complete, error during updating partition...)
PS : I think this error was not present when i tried flashing stock rom or RR rom
Update Today i tried installing optimised stock rom through usb otg... Following error occured :
E; Error executing updater binary in zip followed by same error in upadating partrition as above..
Click to expand...
Click to collapse
It appears that all your partitions are corrupted
You need to format them
In TWRP format ( not wipe) all partitions
The option to format data partition is straight forward and given in wipe menu
For other partitions (system ,cache) go to wipe---> advanced wipe and change the file system of system and cache partition to ext4 ( don't change to anything else)
This will format them
Try this and then try to do normal wipes and see if you are successful and report back
Sent from falcon
Press thanks if helped?????
sjandroiddeveloper said:
It appears that all your partitions are corrupted
You need to format them
In TWRP format ( not wipe) all partitions
The option to format data partition is straight forward and given in wipe menu
For other partitions (system ,cache) go to wipe---> advanced wipe and change the file system of system and cache partition to ext4 ( don't change to anything else)
This will format them
Try this and then try to do normal wipes and see if you are successful and report back
Sent from falcon
Press thanks if helped
Click to expand...
Click to collapse
When i tried to format data partition same error showed up... And when i tried to change file system of system and cache partition , above it is shown that format complete , successful but in the log same error appeared..
savvy54 said:
When i tried to format data partition same error showed up... And when i tried to change file system of system and cache partition , above it is shown that format complete , successful but in the log same error appeared..
Click to expand...
Click to collapse
Try philz touch from here
https://drive.google.com/file/d/0B7lxW9DP17gNalk2Y3EtcU9JZTA/edit?usp=docslist_api
Go to wipe and format----> custom format and then try to format all partitions and see if you're successful
Sent from falcon
PRESS THANKS IF HELPED?????
sjandroiddeveloper said:
Try philz touch.
Go to wipe and format----> custom format and then try to format all partitions and see if you're successful
Sent from falcon
PRESS THANKS IF HELPED
Click to expand...
Click to collapse
Yes, now format is successful. Formatting data for first time showed some error but in second time it was successful.
So, what to do now ? I want to go to stock.. So, anything in that direction will be helpful..
Can i flash the link i have posted ? if yes, then do i need to flash radio firmware ?
savvy54 said:
Yes, now format is successful. Formatting data for first time showed some error but in second time it was successful.
So, what to do now ? I want to go to stock.. So, anything in that direction will be helpful..
Can i flash the link i have posted ? if yes, then do i need to flash radio firmware ?
Click to expand...
Click to collapse
The link you posted is not pure stock
Its optimised means it is a custom version of stock ROM
The same dev ( @lost101 ) also provides pure versions of stock rom flashable through recovery so try that if you want a pure Motorola ROM
But I suggest you to use CM 12.1 now, as its based on android 5.1.1 its always better then stock 5.0.2 in terms of stability plus you get plenty of customization options and there's already a built in root manager
And the ROM is getting better day by day
So finally its your choice
PS:- No need to flash radio
Sent from falcon
PRESS THANKS IF HELPED?????
sjandroiddeveloper said:
The link you posted is not pure stock
Its optimised means it is a custom version of stock ROM
The same dev ( @lost101 ) also provides pure versions of stock rom flashable through recovery so try that if you want a pure Motorola ROM
But I suggest you to use CM 12.1 now, as its based on android 5.1.1 its always better then stock 5.0.2 in terms of stability plus you get plenty of customization options and there's already a built in root manager
And the ROM is getting better day by day
So finally its your choice
PS:- No need to flash radio
Sent from falcon
PRESS THANKS IF HELPED
Click to expand...
Click to collapse
I already flashed that customised rom.. And also the radio firmware.. Everything is fine now..
I have always wanted to flash CM but stepped back because it is nightly build... However, i have also heard that it is very stable and you are also saying that... So, thinking of flashing that... Please give me the link which to flash & link for gapps if needed... I have just recovered my phone after a long battle and don't want to screw up now by flashing wrong rom..:fingers-crossed:
PS : I don't know how to thank you.. You are a savior man.. This is my first time in unlocking ,rooting and all that stuff and i screw up the thing.. Again, thank you for your help...:good::good:
savvy54 said:
I already flashed that customised rom.. And also the radio firmware.. Everything is fine now..
I have always wanted to flash CM but stepped back because it is nightly build... However, i have also heard that it is very stable and you are also saying that... So, thinking of flashing that... Please give me the link which to flash & link for gapps if needed... I have just recovered my phone after a long battle and don't want to screw up now by flashing wrong rom..:fingers-crossed:
PS : I don't know how to thank you.. You are a savior man.. This is my first time in unlocking ,rooting and all that stuff and i screw up the thing.. Again, thank you for your help...:good::good:
Click to expand...
Click to collapse
As a general info, just don't play with fastboot commands and now don't try to flash stock firmware through fastboot again as it most likely will mess with your partitions
And for trying different ROMs you need a backed up system and data partition with a fully working recovery, then experiment with whatever ROM you want there is no harm ( if the ROM don't boot you can force reboot and restore the backup you made)
Link to CM 12.1 nightlies
https://download.cyanogenmod.org/?device=falcon
And just so you know cm is fully stable, I have been using it for three months and I never looked back at stock ones
So flash the latest nightly
Link to Gapps
http://forum.xda-developers.com/android/software/reborn-gapps-5-t3074660
Happy flashing
Sent from falcon
PRESS THANKS IF HELPED?????
Hello i recently use SlimLP rom until suddenly it was stuck on boot loop . I thought that it must be the problem of the custom ROM and i try to flash other ROM but it seems that i can't proceed to the procedure of wipe data/factory reset because it kept restarting after i checked that option . wiping dalvik cache is fine though . I also did format/data on my solo attempt to fix it but still it won't work.After reading some forum I decided to flash stock firmware but it kept failing on Odin . anyone know what might be the problem of this ? Did I just hardbricked my tab to the point of can't be repaired ? thanks in advance
Try to delete everything in data manually through twrp file manager (Advanced->File Manager)
john99ap said:
Try to delete everything in data manually through twrp file manager (Advanced->File Manager)
Click to expand...
Click to collapse
Im using CWM recovery T.T
iqbaladeee said:
Im using CWM recovery T.T
Click to expand...
Click to collapse
Then, install the latest common twrp by Andi from here: http://andi34.github.io/recoveries_tab2.html
and try it (first try also to wipe data with twrp)
iqbaladeee said:
Hello i recently use SlimLP rom until suddenly it was stuck on boot loop . I thought that it must be the problem of the custom ROM and i try to flash other ROM but it seems that i can't proceed to the procedure of wipe data/factory reset because it kept restarting after i checked that option . wiping dalvik cache is fine though . I also did format/data on my solo attempt to fix it but still it won't work.After reading some forum I decided to flash stock firmware but it kept failing on Odin . anyone know what might be the problem of this ? Did I just hardbricked my tab to the point of can't be repaired ? thanks in advance
Click to expand...
Click to collapse
I can't change my rom, wipe / format doesn't work. Nothing changed after flashing with Odin.
16 GB Tab 2 have a known faulty EMMC (MAG2GA). It can happen, that your EMMC get “read only”, so you can’t perform any write actions (also you can’t format) anymore.
From the EMMC data sheet:
5.1.7 End of Life Management:
The end of device life time is defined when there is no more available reserved block for bad block management in the device. When the device reaches to end of its life time, device shall change its state to permanent write protection state. In this case, write operation is not allowed any more but read operation are still allowed.
But, reliability of the operation can not be guaranteed after end of life.
On a faulty EMMC firmware it happens a lot faster.
What are the symptoms?
Uninstalled apps and deleted files are back after a rebootFormating the storage doesn’t work (after reboot the old rom and apps are back)You can flash whatever you like via Odin - it showes “passed” but after reboot nothing changed (e.g. still no StockRom or still the old Recovery you had previously installed)… there might be some more, but only to mention some …
In most cases, the issue can be fixed by a EMMC firmware update, but you need someone who’s able to do it (possible via ISP, nothing you can do esylie at home yourself). In some bad cases you need to find someone who can replace your EMMC.
source: http://andi34.github.io/faq.html
Hy friends
I have J7 2016 SM-J710F
First i installed twrp,the issue is error when backup and wiping.
Try many time keep failed.
Because my phone infected mallware so i flash to this rom https://forum.xda-developers.com/ga...ment-and-mods/rom-stock-elite-j710xx-t3668770
After flashing and reboot,there is alert "Kernel is not seandroid enforcing" at left rigt screen.
Then it show verification failed and ask to reset,but twrp keep failed to reset.
What to do ?
Please help
Thank you very much
EDIT : SOLVED
All i did is go to WIPE PAGE and do FORMAT DATA
The Rules On Installing TWRP Is OEM UNLOCK. And you missed that. And after install TWRP You Must Do FORMAT DATA, THIS WILL DELETE ALL YOUR DATA. The Solution Is Flash Stock Firmware
JonathanFreeze said:
The Rules On Installing TWRP Is OEM UNLOCK. And you missed that. And after install TWRP You Must Do FORMAT DATA, THIS WILL DELETE ALL YOUR DATA. The Solution Is Flash Stock Firmware
Click to expand...
Click to collapse
I did oem unlock before installing twrp,and boot fine after installed twrp.
After installed twrp i try format or reset first before installing rom,but keep me failed also backup failed.
Then i install the rom and the proublem came.
I sugest to use Samsung SmartSwitch to recover phone back to original state.
prbs1982 said:
I sugest to use Samsung SmartSwitch to recover phone back to original state.
Click to expand...
Click to collapse
Thank you for reply
Proublem solved
I did format data from twrp wipe page.
Then i do regular full wipe and install the rom,its worked.
I am having a Yuphoria 5010 and when I flash TWRP via PC its started and even I can also able to flash Stock ROM in it. And all flashing successfully done but the device doesn't boot up it stuck on boot logo.
And if open TWRP and go to mount> "I am unable to select any of them". Also if I go to wipe> "unable to wipe anything", it says-
"unable to mount storage
unable to mount data
unable to mount cache
unable to mount system"
That cause I am unable to install any custom ROM by TWRP itself. So it may be a unique situation, I tried to format cache, data etc to all formats like ext4, ext2, f2fs, fat and It says-"DONE" but still problem remains.
And this all problem cause after somehow I get option called "ENCRYPTION or RESET" which automatic pop up on my device and I don't have any other option so I have to click on RESET and after that my device doesn't boot up, so after I try all method of Yuphoria's solution such as flashing custom ROM, stock ROM by PC, Installing TWRP and Wipe all of them and etc. But nothing works for me.
SO IF ANYONE IS THERE WHO KNOW HOW TO FIX IT, PLEASE HELP ME TO GET RID OUT OF THIS PROBLEM.
THANK YOU
Please anyone of developer reply to fix it. Thankyou