Hello everyone. Xiaomi MI4 bought a black 64gb in aliexpress, so I opened the box I turn on the unit, realized he was discharged, then I put it to load, but only rises a red LED at the bottom and all, the machine shows no sign of life, let charge for 24 hours and he does not care, just gets the red LED, someone could help me?
davifs said:
Hello everyone. Xiaomi MI4 bought a black 64gb in aliexpress, so I opened the box I turn on the unit, realized he was discharged, then I put it to load, but only rises a red LED at the bottom and all, the machine shows no sign of life, let charge for 24 hours and he does not care, just gets the red LED, someone could help me?
Click to expand...
Click to collapse
Does your pc detect anything when you plug usb cable ?
Yes, it detects, but then disconnects, can it be a problem in the battery?
Chances are you have received a refurbished device or defective battery.
Try and find another Mi4 user for trial of the battery or let's see you need to contact the vendor soon.
Sent from my MI 4W using XDA Free mobile app
Hii bro..sometimes battery goes below critical level,phone doesnt start.this situation is called sleep of death. U need to keep ur mobile in charging for 12 hours.hope this will solve ur problem.
Sent from my MI 4W using XDA Free mobile app
Charge via wall adapter. Leave it for some time.
PS: When your battery reaches 9-10%, it is advisable to charge it back to 100%.
Hi,
Im having the same problem, Red LED when charging, nothing else on screen, cannot switch on, its not even detected when connected to pc.
were you able to solve your problem?
malekts said:
Hi,
Im having the same problem, Red LED when charging, nothing else on screen, cannot switch on, its not even detected when connected to pc.
were you able to solve your problem?
Click to expand...
Click to collapse
I just got this issue 10min ago. Havn't depleted the battery on the phone for a very long time, my guess is that it hasn't calibrated the battery in a while or something like that. Will keep it in the fast charger during the night and then i'll reply here.
EDIT: Normally the red LED is constantly on when the battery is low and it's in the charger, now it's flashing which makes it look a bit more scary.
EDIT2: Works fine now after a night of charging
Charger could be not pushing enough voltage to charge battery. Try another one to see if it remedies the issue.
I do have the same problem with my Mi4. I wanted to start the update in the Updater app (to Android 6 version of Xiaomi.eu) and suddenly it turned off (at 100% battery). When I connect my phone with my computer it is recognized and all the partitions are mounted. And with all I mean all. There are about 7 partitions mounted (Linux and Windows) and they keep being mounted until I disconnect the phone. I let my Mi4 on the wall charger for 24 hours (2A Samsung one which charges all my other devices without any problems) but I still have the blinking red light after connecting it to the charger. Any other things I can do to get it running again?
EDIT: I can't see the phone in fastboot or adb and when I keep the power button pressed for about 10s it seems to disconnect and instantly reconnect the phone.
HibikiTaisuna said:
I do have the same problem with my Mi4. I wanted to start the update in the Updater app (to Android 6 version of Xiaomi.eu) and suddenly it turned off (at 100% battery). When I connect my phone with my computer it is recognized and all the partitions are mounted. And with all I mean all. There are about 7 partitions mounted (Linux and Windows) and they keep being mounted until I disconnect the phone. I let my Mi4 on the wall charger for 24 hours (2A Samsung one which charges all my other devices without any problems) but I still have the blinking red light after connecting it to the charger. Any other things I can do to get it running again?
EDIT: I can't see the phone in fastboot or adb and when I keep the power button pressed for about 10s it seems to disconnect and instantly reconnect the phone.
Click to expand...
Click to collapse
I solved this problem on my own. Even though the phone doesn't show up on the fastboot devices list you can use the Mi Flash Tool to flash the fastboot update (http://xiaomiadvices.com/miui-7-flash-fastboot-rom-on-xiaomi-phones-using-mi-flash-tool/). The drivers installed with the Mi Flash Tool for the Windows 10 Mobile Release (http://en.miui.com/thread-189369-1-1.html) recognize all the partitions as one device and show it with a cryptical name in the flash list.
Hi ! I fully charged the phone and after it shuted down. It doesn't starts. PC doesn't see it. When I'm plugin the wire just half way into the phone the red light stays on for a few seconds and than nothing at all. Can anyone help me?
Push power+vol up for quite enough lets say 20 sec
same problem here i kept charging for whole night but phone not getting on.. only red LED comes when kept for charging and not detected in PC also. Can any 1 help on this
I had the same problem ( strangely,it occured after a whole night charging, f... knows what happened)
Tried to change charger. No luck. The phone won't even boot by pushing Vol down+ Power
Solution: I simply connected the phone to a portable external charger, and tadaaaa !!! it was brought back to life !
Hope this helps
Related
Help Please. I have been running this Trickdroid for quite some time. And thanks to such great battery life I have never seen my phone under 10%....until yesterday when it ran all the way down and powered it self off. ....now it will not take a charge tried all my different chargers even tried a rapid charger (Nex7 charger) and the charging LED never comes on. Will not even try to light up the screen when you hold the power button. I'm concerned about sending it in via TMO that they will fix it and find i unlocked and rooted it and charge me full price for my replacement. Any thoughts? Has this happened to anyone else on this ROM? Is there a way to revive it? Thanks.
Hold power button soft keys should light up then release after 3sec but it on charge and leave it there even if light doesn't come on and after awhile the light should come on
Sent from my HTC One S using xda premium
Yes mate K1llacannon is right mate i can totally confirm that.
I read from one dude with a HOS he left it sit there a full night with the charger connected and after that he could use it again. Apparently, the light will come on eventually but it will take a while until the battery has enough juice to boot the phones charging electronics. Before that, it will take power but show no indicator.
Also, i suppose it is some sort of emergency circuit that charges in the beginning and it is only charging at some minimum rate or something like that so it takes a while...
k1llacanon said:
Hold power button soft keys should light up then release after 3sec but it on charge and leave it there even if light doesn't come on and after awhile the light should come on
Sent from my HTC One S using xda premium
Click to expand...
Click to collapse
Thanks guys for the reply....I have tried this and the keys never flash and I left it plugged in all night last night and then again all morning on a different charger and still nothing,....ugh.
It now does do this when plugged into the PC: The PC will do the "durp drup" like its connected then do the tone again as if its not connected again. This cycle just keeps going. I tried to do some adb but keeps saying no device.
RamboDroid said:
Thanks guys for the reply....I have tried this and the keys never flash and I left it plugged in all night last night and then again all morning on a different charger and still nothing,....ugh.
It now does do this when plugged into the PC: The PC will do the "durp drup" like its connected then do the tone again as if its not connected again. This cycle just keeps going. I tried to do some adb but keeps saying no device.
Click to expand...
Click to collapse
Try fastboot devices, adb only works when phone on and USB debugging enabled and in recovery sometimes. If it shows your device then maybe try fastboot reboot recovery or something.
My first One S was completely dead on arrival, no sign of life after charging it for 24 hrs straight with original charger (tested charger OK) and holding PWR for 10, 30 seconds and longer. Got a new one no questions asked. Not that this is necessarily the same problem you're having since yours have been running but then again I'd guess they at least test all phones so they start at factory...
Hi There,
Yesterday morning I went to work with a completely charged Moto G. When I arrived at work my screen was black and had become unresponsive.
The powerbutton doesn't wake up the phone, tried several times, holding it for more than 150sec. When connected to a charger (tried multipe) the charging led lights up, not blinking.
I have read on a motorola forum that this could indicate that there's insufficient power in the battery to activate the display.
However it was completely charged.
My Moto G has an unlocked bootloader, is rooted and has a custom rom (C-Rom, [ROM][AOSP][KK][12/05] **C-RoM** -4.4.2- -v6.5)
Is there anything I can try or is my phone a brick now?
Thanx in advance
The same problem
I am having the same problem too.
My moto G drained its battery until it shut down. Then i promptly went to charge it. The screen is blank and and notification light is on.
snooze1973 did u find a solution or is it now working?
PS My Moto g bootloader unlocked, stock rom,rooted and it is on the Faux123kernel
Thanks in advance
No luck Yet
No luck yet, left it on the charger for a whole night, still just the white charging led. No response to the power button.
But I refuse to believe it is completely dead. Before I had a HTC Desire S, tried many custom roms, never bricked it.
I just can't imagine what happend the day before yesterday.
Perhaps I'll try and find a more powerfull charger.
snooze1973 said:
No luck yet, left it on the charger for a whole night, still just the white charging led. No response to the power button.
But I refuse to believe it is completely dead. Before I had a HTC Desire S, tried many custom roms, never bricked it.
I just can't imagine what happend the day before yesterday.
Perhaps I'll try and find a more powerfull charger.
Click to expand...
Click to collapse
I think I found a solution. I followed these steps
1. Charge your phone via USB cable on your computer.
2. The white notification light should come on.
3. Then, do not touch any buttons on your phone.
4 The iconic Battery Logo(white background) should appear after several minutes.
Followed these steps and my phone eventually turned on
Good luck!!
Still no luck, trying a different cable (blackberry) now.
Not working for me, still just a beautiful white led indicator.
Start to think it's probably dead. Or battery thinks it's drained somehow.
Maybe anyone else has an idea?
Ok, I opened the Moto G and disconnected the battery, reconnected it after 10 sec. still no luck
Odd thing though and not very promising is that when the battery is disconnected the charging led still lights up when charger is connected.
Could this just mean that only the battery is fully drained or that the device is messed up?
Guess I going for a new one.
See if a new battery helps
Bought a new one today, so I can try and fix the other. First I will leave it for at least 24 hours.
Perhaps I will exchange the batteries at one time to see if that helps.
the same problem
shahtheass said:
I am having the same problem too.
My moto G drained its battery until it shut down. Then i promptly went to charge it. The screen is blank and and notification light is on.
snooze1973 did u find a solution or is it now working?
PS My Moto g bootloader unlocked, stock rom,rooted and it is on the Faux123kernel
Thanks in advance
Click to expand...
Click to collapse
i had the same problem, i had no idea how to turn on my moto g.
anyone could help please
Black screen but charging led lights up
I am experiencing the same issue.
I bought a dead moto g for part replacement with my current moto g. Just out of curiosity, I plugged in the charger to the newly arrived moto g and observed the similar behavior.
To go further, I swapped the battery and tried to turn it on, and voila, it boots!! It has C-ROM. But it won't charge the battery any how. Its again back to
original behavior : No Screen, No Battery Charging, Only notification LED glows. I kept it on charger for whole night, but no luck.
The notification LED turns on even if I the battery is removed and charger is plugged in. What does that really mean?
Is there a probability that the charging circuit is broken? or it has something to do with bootloader, C-ROM and custom kernel? Does any one thinks reverting back to Stock ROM will help out in any way?
Same here...
Exactly the same with my little brother his Moto G 4G (1st gen) (stock rom, BL unlocked & rooted).
Solid white LED when plugged in, no other response.
The most advertised trick does not work (step 6: flashboot screen doesn't show up)
[SIZE=+1]Q28: Moto G will not power up (addition to Q16 and Q25)[/SIZE]
Plug it into the charger
Hold the VOL DOWN key
While still holding the VOL DOWN key, press and hold the POWER key
Hold both keys down for over 120 seconds. This is more than two minutes and will seem like a long time. You might want to time yourself to make sure you hold it longer than two minutes.
After holding the keys down for more than two minutes, release them.
The Flash Boot screen will display, and the Normal Reboot option will be highlighted
Press the VOL UP key and the device will start a normal reboot.
If you have tried the above and it didn't work, try this:
Plug in the phone for 15 minutes.
Proceed to Step 2 above.
Click to expand...
Click to collapse
(source: http://forum.xda-developers.com/showthread.php?t=2537119)
It has been an hour on the charger of my Asus T100 Tablet (5V, 2A). Still no luck...
Due to the lack of other solutions, I guess all our phones are ready for RMA...
Update: an overnight charge on a 5V 1A charger did the trick. White led was gone this morning, booted normally.
JoWannes said:
Exactly the same with my little brother his Moto G 4G (1st gen) (stock rom, BL unlocked & rooted).
Solid white LED when plugged in, no other response.
The most advertised trick does not work (step 6: flashboot screen doesn't show up)
(source: http://forum.xda-developers.com/showthread.php?t=2537119)
It has been an hour on the charger of my Asus T100 Tablet (5V, 2A). Still no luck...
Due to the lack of other solutions, I guess all our phones are ready for RMA...
Update: an overnight charge on a 5V 1A charger did the trick. White led was gone this morning, booted normally.
Click to expand...
Click to collapse
i hv been facing the same problem since past 2 days, it was working gud wen suddenly it went bad. i remember using it and putting it back into my pocket & after like 10 mins wen i tried to open it, it didn't respond. i tried to hard reset it (by pressing vol down n power button) & by forced reset but it didnt work. now, i have put it on charge on a source of 5v 1A charger. i hope it works and works well. now my question is that i remember my cell was nearly 50% charged wen all of ds happened, so i wish to know that is dre some hardware problem or dead battery problem?? thnx in advance
shahtheass said:
I think I found a solution. I followed these steps
1. Charge your phone via USB cable on your computer.
2. The white notification light should come on.
3. Then, do not touch any buttons on your phone.
4 The iconic Battery Logo(white background) should appear after several minutes.
Followed these steps and my phone eventually turned on
Good luck!!
Click to expand...
Click to collapse
I don't know why a USB charger and a PC connection should make any difference when the phone is not booted up.
I had the same problem. I solved it by removing the battery by opening the phone (mine was out of warranty) and taking it to repair shop where they charged the battery for an hour. Then when I put it back in, the phone rebooted normally with 10% charge.
But ever since, my battery life has deteriorated. Doesn't even last one full day. And I have had the same issue twice. I think I need a new battery.
snooze1973 said:
Bought a new one today, so I can try and fix the other. First I will leave it for at least 24 hours.
Perhaps I will exchange the batteries at one time to see if that helps.
Click to expand...
Click to collapse
Did New battery helped u in booting device?? because i am having the same problem.
same problem here.just call from Moto Care they told to charge bettery for 7 hours min.then on the phone.let see if it works i will update..
Same Problem to me not for me this problem is faced by several moto g users
snooze1973 said:
Hi There,
Yesterday morning I went to work with a completely charged Moto G. When I arrived at work my screen was black and had become unresponsive.
The powerbutton doesn't wake up the phone, tried several times, holding it for more than 150sec. When connected to a charger (tried multipe) the charging led lights up, not blinking.
I have read on a motorola forum that this could indicate that there's insufficient power in the battery to activate the display.
However it was completely charged.
My Moto G has an unlocked bootloader, is rooted and has a custom rom (C-Rom, [ROM][AOSP][KK][12/05] **C-RoM** -4.4.2- -v6.5)
Is there anything I can try or is my phone a brick now?
Thanx in advance
Click to expand...
Click to collapse
Same Problem to me not for me this problem is faced by several moto g users are facing this if they unlocked their device bootloader.
I have a simple solution for that I have faced this issue long time ago and now I know a permanent solution. You all have usb cables in your house...just took a old one and cut it from the mini usb side..there are 4 wires...you have to care about red and black..open your moto g battery and took it off from the phone now connect the usb cable to your pc and touch the red wire to the positive and black to the negative ...just do this for 45 seconds and immediately connect the battery to the phone and connect the charger...phone will starts charging from 0 % pls do not wait to connect the switch and back cover just charge it upto 20 % the cover it up.....DO NOT LET YOUR BATTERY DRAIN MORE THAN 30% AS THIS IS COMMON PROBLEM IN LI ION BATTERIES...
sayonsamui said:
I have a simple solution for that I have faced this issue long time ago and now I know a permanent solution. You all have usb cables in your house...just took a old one and cut it from the mini usb side..there are 4 wires...you have to care about red and black..open your moto g battery and took it off from the phone now connect the usb cable to your pc and touch the red wire to the positive and black to the negative ...just do this for 45 seconds and immediately connect the battery to the phone and connect the charger...phone will starts charging from 0 % pls do not wait to connect the switch and back cover just charge it upto 20 % the cover it up.....DO NOT LET YOUR BATTERY DRAIN MORE THAN 30% AS THIS IS COMMON PROBLEM IN LI ION BATTERIES...
Click to expand...
Click to collapse
Interesting, but how did you determine the negative and positive terminals on the battery flex? Can you, please, mark the attached photo of the battery of moto g to help the community?
Also, as a side note I think I discovered a solution - I connected the phone to my PC's usb 2.0 port and held the power button for 2 minutes - at which the LED blinked momentarily and then continues to shine. I left the phone connected and continued to browse for solutions to this battery charging dilemma - then about 5 minutes the LED stopped shining (and I breathed a sigh :silly: !!! becaue this is the sign of battery being charged!) and after about 30 minutes of charging I turned the phone on and it was 16% charged. Well I haven't been able to reproduce this solution (since, I have been extra cautious with the battery now!) but I would surely like to know if anyone can reproduce this solution:
1. Plug in your phone to USB 2.0 or 3.0 port with original moto g cable and confirm that the LED shines continuously.
2. Hold the power button for 2 minutes (which I discovered to be a long time if you just continuously stare at the phone!) after which you will notice that the led with blink momentarily before continuing to shine continuously. (I suggest you continue holding it for another 2 minutes after which the led will blink again momentarily)
3. Leave the power button and leave the phone attached to the port for at least 30 mins before attempting to power on.
So I had a extreme low battery alert, where it said cannot boot until more charge.
Stuck the charger in.
Battery wasnt going up.
Now it wont turn on at all with charger in or out.
So looks like either the battery is dead (non swappable) or the usb port is broke so isnt accepting charge.
Wow the phone is only 2 months old.
any ideas? or has to be returned for repair/exchange?
luckily was only using this phone for testing roms and stuff, not daily driver.
chrcol said:
So I had a extreme low battery alert, where it said cannot boot until more charge.
Stuck the charger in.
Battery wasnt going up.
Now it wont turn on at all with charger in or out.
So looks like either the battery is dead (non swappable) or the usb port is broke so isnt accepting charge.
Wow the phone is only 2 months old.
any ideas? or has to be returned for repair/exchange?
luckily was only using this phone for testing roms and stuff, not daily driver.
Click to expand...
Click to collapse
Try plugging into charge on a low power source via USB like a PC or laptop. Anything that isn't direct to a mains socket. It can help slowly replenish the battery, just leave it be for a while.
I just had a similar experience where my phone died overnight. Plugged it into my non OPO charger that I used with my older blackberries.
It wouldn't even turn on after 20 minutes of being plugged in. I decided to use a charger that outputted more energy and it immediately turned the phone on.
My advice, try using different charging sources.
Sent from my A0001 using XDA Free mobile app
I recently had this problem. Solved it with a simple google search which brought up O+'s own help page. Press the power button for 20 seconds 5 times in succession. This simulates a battery pull (there will be a vibration) . Now plug the phone into the original charger and leave it for a couple hours at the least.
You could also try to disconnect and connect the battery. For this you have to open the phone. Here is a little tutorial https://youtu.be/xLB4fhOyvuA
Hope this will fix the problem.
Same thing happened to my sons 1+, This is the reply form CS
Regarding your issue, please try with below steps:
1) Keep the phone for 12 hours without touching and charging...
2) Charge with official charger and usb for 6 hours(after the above mentioned steps) and then
3) Pull off the usb and put back again ... and you may get a LOW battery screen again staying for 4 / 5 mins...
4) Now don't try to boot or anything.. let it charge for 1 hour or more.
5) Now finally boot your device by pressing power button for few seconds
6) Phone should boot normally...
Trying it now
Howdy!
My phone doesn't work anymore, and I try to assess what's going on. I searched before posting, and I decided to post here because I found mixed answers.
Context:
I bought my phone in January 2014. I took extra care of it, it has never fallen on the ground from high, no scratch, nothing. Regarding the battery, I tried as much as possible to charge when it was close to 0%, I wasn't a heavy user of my phone, and I was turning off a lot of things so that the battery would not deplete quickly (Wifi, localisation, Bluetooth, auto-typing, et cetera...).
However, recently (the last month), I was feeling the battery was weak, depleting more quickly than before. I also felt the phone was warmer than usual. Sometimes the phone would turn off suddenly when I was short on battery (under 15%) and using a "heavy" feature (photography with flash, video game).
A week ago, the phone suddenly turned off, never to turn on again. The phone died. I was just typing a message, the phone was charging and the battery was around 60%. I was surprised.
As of today, the phone doesn't turn on. Plugged on a wall outlet or on the USB port of my computer is the same.
I tried many combination of buttons to fastboot, reboot, reset, or whatever, nothing sparked any life in my phone. (I tried holding power key for 30s+, 15s+ ; I tried holding power key + volume up for 15s+ ; power key + volume down ; power key both volume ; in fact whatever combination I could read here on XDA forums, on Reddit, on Google Forums...).
My first insight was: it's just the battery. I can buy one off the internet, and voilà!
However, when I plug the Nexus 5 on my computer via USB, the computer reacts with the sounds when you connect something. Is it just the battery then?
At first, it was saying: "QHS_USB BULK", and the computer was trying to install whatever to make that peripheral work.
When it was done, it read "Qualcomm HS-USB QDLoader 9008 (COM4) has been correctly installed.
Hum, okay.
Still, nothing shows in the peripheral.
I continue to hear the plug in plug out sound when I... plug in and out my phone in the computer, but that's the only thing.
With all that, I can't really tell if all the phone is dead, something grilled inside or I don't know what; or if it's just the battery that is dead and the phone is unreachable and unrecognizable when "there is no battery" in it.
I'm not sure if I shall invest money into buying a new battery.
Do you guys can light my lantern on that matter?
I would greatly appreciate it.
Thanks,
Cheerio!
If I may just address a little bump on this very subject of particular interest to myself :3
Cheerio!
Any insights on this? mine´s doing the same. Doesn´t turn on or go into bootloader, when i connect to charge it red light blinks for like 10 sec and then goes off. Nothing happens after hours of charge.
Did you try replacing the battery as you mention on the post?
Sorry, but have to say this with caps: BLINKING RED NOTIFICATION LED MEANS ITS DEAD BATTERY. Can't be 100% sure, but usually it means that the phone doesn't have enough power to boot up. Mine did this when it drained to the absolute 0%
edit: There can be other problems with power going to phone, but if you are lucky its just the battery.
So i changed the battery. When i plugged it to charge no red lights came on, just the typical white battery with the light bolt appeared for a few seconds, after that it went on with screen off (or at least i thought it did). After 3 h of uninterrupted power charge i went to turn it on. Nothing happened. Can´t turn it on or go into bootloader.
Nothing happens on my pc when i plug it. No sound and nothing on Device manager (no drivers for nexus 5 installed, don´t know if that matters for windows to recognize it as any device even if its not as android device).
Edit: yeah, i got enlightened and literally unplugged the battery and plugged it back in and it worked like charm. I get stuck on the intro animation but i can get into bootloader and recovery just fine. Just gonna install those drivers and flash something. right? Thanks to everyone that read and even more to those who replied!
qaleq14 said:
So i changed the battery. When i plugged it to charge no red lights came on, just the typical white battery with the light bolt appeared for a few seconds, after that it went on with screen off (or at least i thought it did). After 3 h of uninterrupted power charge i went to turn it on. Nothing happened. Can´t turn it on or go into bootloader.
Nothing happens on my pc when i plug it. No sound and nothing on Device manager (no drivers for nexus 5 installed, don´t know if that matters for windows to recognize it as any device even if its not as android device).
Edit: yeah, i got enlightened and literally unplugged the battery and plugged it back in and it worked like charm. I get stuck on the intro animation but i can get into bootloader and recovery just fine. Just gonna install those drivers and flash something. right? Thanks to everyone that read and even more to those who replied!
Click to expand...
Click to collapse
Yeah, search from youtube how to flash factory image nexus 5. It should make it work. And try to find video with using adb instead of toolkit, adb is way more stable/trustable. (ADB is the android debug bridge, it may look like very hard and confusing but in the end its just typing 1 command and it flashes everything needed) If you need help in flashing the image, just ask!
Try this, it installs only tools needed for adb (also drivers) http://forum.xda-developers.com/android/software/tool-platform-tools-adb-fasbootdrivers-t3061441
Edit: This should work https://www.youtube.com/watch?v=5ka5dnPghzI
Hey there , i came to you because i think my phone done a short circuit, it was ON and pluged in an inactive USB port on my PC which i've plugged internaly just after.
Then i noticed that the low battery LED on the OnePlus doesn't blink anymore. First of all i thought about a complete discharge. But no charging LED. I've plugged the phone on the power adapter : No LED. This is when i started to freak out.
I've took appart the phone, removed the battery, mesured the voltage : 3.77 Volts. The battery is normaly 4.35 Volts.
Is it a big gap even if there is always a tolerance ?
Is my battery is dead ? Or something shorten the motherboard ?
I don't want to buy a new battery if this won't solve the issue, and i have no schematics to do a continious testing with my multimeter on the motherboard..
Any help is welcommed. Thanks.
I think you were too quick to take phone apart, you should have been keep the phone connected to charger for atleast 6 hours before taking it apart ..
Sent from my A0001 using Tapatalk
Connect your OPO to Wall Charger, Charge it for about 10min or so. Press n Hold Power Button for at least 1min.
If nothing fancy happened to your phone than it should boot from dead. If not than think further.
BTW When you connect it to your pc, how's your pc recognize your device as?
Any QHSUSB_BULK 9006 Or 9008 error? If not than Its not Bricked yet. Just try to charge for 10min and check.
dr.patron99 said:
Connect your OPO to Wall Charger, Charge it for about 10min or so. Press n Hold Power Button for at least 1min.
If nothing fancy happened to your phone than it should boot from dead. If not than think further.
BTW When you connect it to your pc, how's your pc recognize your device as?
Any QHSUSB_BULK 9006 Or 9008 error? If not than Its not Bricked yet. Just try to charge for 10min and check.
Click to expand...
Click to collapse
I tried to wall charge it for like half an hour and try to powering it on, but nothing happend. When i plug it to my pc, he not recognized at all and i have no life signs from the opo.
OxygeenHD said:
I tried to wall charge it for like half an hour and try to powering it on, but nothing happend. When i plug it to my pc, he not recognized at all and i have no life signs from the opo.
Click to expand...
Click to collapse
Do you have OnePlus drivers installed? Or Have you installed them previously?
There's no way Phone could go dead without any prior sign. I mean there must have been something happened to it before it gone dead brick!
What was last state when you saw it working beforeot went blank?
dr.patron99 said:
Do you have OnePlus drivers installed? Or Have you installed them previously?
There's no way Phone could go dead without any prior sign. I mean there must have been something happened to it before it gone dead brick!
What was last state when you saw it working beforeot went blank?
Click to expand...
Click to collapse
Of course my drivers are installed.... but the phone don't do anything when plugged, no charging LED, no reaction when i push the power button
Before he goes "dead" he has low battery.
OxygeenHD said:
Of course my drivers are installed.... but the phone don't do anything when plugged, no charging LED, no reaction when i push the power button
Before he goes "dead" he has low battery.
Click to expand...
Click to collapse
Charging LED will only lit up while device is ON. If device was completely functional before it died, than I'm assuming it as Battery issues.
Did it ever got warm or hot near battery area? Since you've already took it apart to check voltages,so you know it better which area I'm talking about.
Most likely it could be Battery. If not anything major.
dr.patron99 said:
Charging LED will only lit up while device is ON. If device was completely functional before it died, than I'm assuming it as Battery issues.
Did it ever got warm or hot near battery area? Since you've already took it apart to check voltages,so you know it better which area I'm talking about.
Most likely it could be Battery. If not anything major.
Click to expand...
Click to collapse
Okay so i got the phone to boot up. plugged it into usb : Phone don't got recognized. battery charging logo in status bar
Plugged to power adapter : Battery charging logo on status bar.
I noticed that the charge is incredibly slow. then i goes in parameters -> battery to check battery mode and stuff.
underneth the graph it says : 2% Not charging. But i got the logo on the status bar... ?
So here is a recap of the issues i got : Battery not charging, and discharging fast.
Not recognized by USB
No rear faced camera and flashlight.
OxygeenHD said:
Okay so i got the phone to boot up. plugged it into usb : Phone don't got recognized. battery charging logo in status bar
Plugged to power adapter : Battery charging logo on status bar.
I noticed that the charge is incredibly slow. then i goes in parameters -> battery to check battery mode and stuff.
underneth the graph it says : 2% Not charging. But i got the logo on the status bar... ?
So here is a recap of the issues i got : Battery not charging, and discharging fast.
Not recognized by USB
No rear faced camera and flashlight.
Click to expand...
Click to collapse
If your device booted up, Can you post some screenshots of it? I just need to see whether a Port got damaged or something else.
BTW Which ROM you're ON? Have you ROOTED your OnePlus One in the past? Or Its Still Stock?
dr.patron99 said:
If your device booted up, Can you post some screenshots of it? I just need to see whether a Port got damaged or something else.
BTW Which ROM you're ON? Have you ROOTED your OnePlus One in the past? Or Its Still Stock?
Click to expand...
Click to collapse
I'm on stock not rooted COS13.0 ZNH0EAS26M, i wish i could post some screens, but as i said, my phone is not recognized anymore by my pc.
up please.
Here are the screens. Sorry i can't uipload them directly on XDA, file's too large..
http://puu.sh/ovwES/922d4cdaec.jpg
http://puu.sh/ovwB1/6a02f1114f.jpg
http://puu.sh/ovwtw/c2ac76cc8b.jpg
http://puu.sh/ovwqQ/0746ef3925.jpg
up
Do you have An other USB cable? Maybe its broken?
Verstuurd vanaf mijn A0001 met Tapatalk
moneyvirus said:
Do you have An other USB cable? Maybe its broken?
Verstuurd vanaf mijn A0001 met Tapatalk
Click to expand...
Click to collapse
i have other usb cables, but nothing changed.
OxygeenHD said:
Okay so i got the phone to boot up. plugged it into usb : Phone don't got recognized. battery charging logo in status bar
Plugged to power adapter : Battery charging logo on status bar.
I noticed that the charge is incredibly slow. then i goes in parameters -> battery to check battery mode and stuff.
underneth the graph it says : 2% Not charging. But i got the logo on the status bar... ?
So here is a recap of the issues i got : Battery not charging, and discharging fast.
Not recognized by USB
No rear faced camera and flashlight.
Click to expand...
Click to collapse
hi, how did you get it to boot up? are you running the device directly from USB power? or is it running on battery?
Hold volume up, nothing else and connect it to your PC. After that check device manager and find "QHSUSB_Bulk. If you can find that one, send me a PM.