I wrote a blog post on how you can change your M8sw from China to M8sw EU
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I did this with mine, and works great.
I'm not sure if other models like M8sd can do this, but you can try.
There is no risk in Bricking your device, just make sure you have a RUU from your model as backup
READ HERE HOW TO
DutchDanny said:
I wrote a blog post on how you can change your M8sw from China to M8sw EU
I did this with mine, and works great.
I'm not sure if other models like M8sd can do this, but you can try.
There is no risk in Bricking your device, just make sure you have a RUU from your model as backup
READ HERE HOW TO
Click to expand...
Click to collapse
This weekend I'll try it.
Do I have to copy all extrated folders and files into ExternalSD/TWRP/BACKUPS/"YOUR_TWRP_ID"/2014-09-20--23-57-56 KOT49H release-keys?? Or only files that are at the folder TWRP 1.21.401.3??
In the folder there should only be the files from the backup
I've got it. Device remodelled and official lollipop OTA installed.
Great job once again!
Hi I cant enter in your site show this message: Error displaying the error page: Application Instantiation Error: Could not connect to MySQL.
---------- Post added at 09:04 PM ---------- Previous post was at 08:53 PM ----------
please put all steps here to do remodel
samuelbahia said:
Hi I cant enter in your site show this message: Error displaying the error page: Application Instantiation Error: Could not connect to MySQL.
---------- Post added at 09:04 PM ---------- Previous post was at 08:53 PM ----------
please put all steps here to do remodel
Click to expand...
Click to collapse
Site is back
The recovery cant write the files in the folder. I stopped on step 3 because i cant advance here
The screen of recovery is empty and dont show nothing on sd
this eu m8sw work 4g LTE?
Thank you for your work!
I don't think I completely understand the last bit
After this, install a custom recovey and make a backup from it.
Safe this on your PC.
If a new OTA comes, you can use this BACKUP to get the Official EU OTA.
If an OTA comes, make sure you flash this firmware before install:
m8sw_2.33.401.3_EU_firmware.zip
Click to expand...
Click to collapse
Do you mean every new OTA will still be a chinese OTA?
And if the solution is to flash EU firmware then why not flash it right away? Am I missing something here?
I have already lollipop in my e8 m8sw. Have any way to suport multilanguages?
samuelbahia said:
I have already lollipop in my e8 m8sw. Have any way to suport multilanguages?
Click to expand...
Click to collapse
If your rooted, look in Playstore for: More Locale
Send via my CM 12 Gtab3
How remove all chinese language and change for english or another language, like portuguese?
samuelbahia said:
How remove all chinese language and change for english or another language, like portuguese?
Click to expand...
Click to collapse
If you remodel there are no Chinese languages
Send via my CM 12 Gtab3
Rooted
What is the advantage of remodeling my M8SW China Remodel to M8SW EU? Is it a problem if my phone is already on android 5.02?
venezuelafotos said:
What is the advantage of remodeling my M8SW China Remodel to M8SW EU? Is it a problem if my phone is already on android 5.02?
Click to expand...
Click to collapse
Get rid of all chinese stuff.
EU bands
And less icons in statusbar
You can remodel even if your on L
Just follow the instructions
Send via my CM 12 Gtab3
DutchDanny said:
Get rid of all chinese stuff.
EU bands
And less icons in statusbar
You can remodel even if your on L
Just follow the instructions
Send via my CM 12 Gtab3
Click to expand...
Click to collapse
i also have question like the other guy from page 1.
Why do we have to do this step?
If a new OTA comes, you can use this BACKUP to get the Official EU OTA.
If an OTA comes, make sure you flash this firmware before install:
m8sw_2.33.401.3_EU_firmware.zip
why do we have to install that firmware before flashing OTA? isnt the phone already changed to EU?
HI Danny i would like to ask if send the clear instructions? where could i get the RUU recovery apk? and should is transfer the ADB apk to my HTC one e8 unit? im looking forward for your favorable response BTW im newbie and NOOB hehehe
Clear instructions and downloads can be found on my website
Send via my CM 12 Gtab3
DutchDanny said:
Clear instructions and downloads can be found on my website
Send via my CM 12 Gtab3
Click to expand...
Click to collapse
0PAIMG.zip inst installing on my phone. When i do fastboot reboot, the phone quickly scans my sdcard for an image but doesnt install. I have put the file on root of my card. Is there any way to verify if the zip file is Ok?
******update
Fixed my issue. The problem was cuz i was using 16GB card, I used a 4GB card and now its updating. thanks. But i still dont get the part where we have to flash m8sw_2.33.401.3_EU_firmware.zip when a new OTA comes. Why do we need to do this? and do we need to do it everytime an OTA comes?
DutchDanny said:
Clear instructions and downloads can be found on my website
Send via my CM 12 Gtab3
Click to expand...
Click to collapse
Hi danny im starting follow all your instructions but i dont have any idea how to go to CID flow instructions? when i run adb and fastboot the screen of my laptop was do nothing.. could you please give me a clear instructions? thank you very much
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Here is the OTA Kitkat 4.4.2 Brazil XT1033 Dual Sim update
Download:
www.mediafire.com/download/qkou2mh3ddftacp/Blur_Version.14.91.9.falcon_umtsds.Brasil.en.BR.zip
Quote:
not work witch cwm or other custom recovery, if tried not working, need stock recovery, and stock rom us.
share it if you find the solution.
Note: Dont worry if dont see icon H+ when you flashes Stock Rom BR, I Test Velocity, is HSPA +. You can see the screenshot int attached.
1.- For Install just flash stock rom IMPORTANT Blur_Version.14.91.9.falcon_umtsds.Brasil.en.BR LINK
2.- Copy the OTA KITKAT 4.4.2 to sdcard or use adb sideload
3.- Apply update from sdcard
4.- Enjoy
Root Working method:
http://forum.xda-developers.com/showthread.php?t=2584210
Creditis OTA Rom: fabiobatera
I was trying to extract the update to share. thank you so much!
what command you used to extract the file?
OTA rom On-line
Hug.
Can I use this on the stock XT1033 Asia ROM?
I need the 4.3 stock kernel... Can someone upload?
r3flux said:
Can I use this on the stock XT1033 Asia ROM?
Click to expand...
Click to collapse
Not only with the firmware Brazil.
Hug.
mascote9rc said:
I was trying to extract the update to share. thank you so much!
what command you used to extract the file?
Click to expand...
Click to collapse
Past cache using the root explorer.
brenopapito said:
I need the 4.3 stock kernel... Can someone upload?
Click to expand...
Click to collapse
Reinstall the firmware 4.3 Brazil
Hug.
fabiobatera said:
Reinstall the firmware 4.3 Brazil
Hug.
Click to expand...
Click to collapse
But I just need the Kernel.
I received the update via OTA, but I use a custom kernel and my device get bootloop when I try to update.
brenopapito said:
But I just need the Kernel.
I received the update via OTA, but I use a custom kernel and my device get bootloop when I try to update.
Click to expand...
Click to collapse
'll level up the kernel to kernel friend
Hug.
Link Kernel 4.3
Extracting the OTA upate file
Hello !
Can anyone guide me as to how do I get the OTA update file when I get an update on my phone.
Thanks:good:
r3flux said:
Can I use this on the stock XT1033 Asia ROM?
Click to expand...
Click to collapse
My Australian-bought XT1033 (dual sim) got Kitkat today.
System version is:
171.44.31.falcon_umtsds.AsiaRetail.en.03
Looking into installing CWM - got adb working so will flash recovery and take a nandroid.
update: bah, just found that unlocking bootloader would void my warranty and requires a unique key from Motorola, so sorry, can't install CWM - phone is too new to void warranty until I'm sure it doesn't have any faults (this is my first non-Nexus phone so didn't realise bootloader unlocking would be so irritating).
edit: lol, looks like its already here on the forums, cool.. http://forum.xda-developers.com/showthread.php?t=2639384
I don´t know why, but my G isn´t installing this update on stock recovery and isn´t upgrading when using OTA updates. It always says that an error occurs, but never show me any error code. Anyone is having this issue?
Another strange thing, is that when I plug my device on my notebook, it doesn´t recognize which version of android I´m running.
I´ve flashed Blur_Version.14.91.9.falcon_umtsds.Brasil.en.BR and stills the same thing. Any help would be great
Thanks in advance.
---------- Post added at 10:54 AM ---------- Previous post was at 10:44 AM ----------
Hi, will this work on locked and unlocked phones?
Doubt
Hi!
Could I use this ROM if I brick my phone? I do really intend to install CM11, but I'm afraid if something goes wrong what should I do. As long as I know, the RSD Lite doesn't recognize our Mogo G, is there another safe (and easy) way to recover our phone as factory default?
Another newbie doubt, if we do install a ROM (let's say, one of the Motorola site - http : // sbf.droid-developers.org / phone.php?device=14 -without spaces]) we will have our bootloader locked back?
Thanks!
biscoitu said:
I don´t know why, but my G isn´t installing this update on stock recovery and isn´t upgrading when using OTA updates. It always says that an error occurs, but never show me any error code. Anyone is having this issue?
Another strange thing, is that when I plug my device on my notebook, it doesn´t recognize which version of android I´m running.
I´ve flashed Blur_Version.14.91.9.falcon_umtsds.Brasil.en.BR and stills the same thing. Any help would be great
Thanks in advance.
---------- Post added at 10:54 AM ---------- Previous post was at 10:44 AM ----------
Hi, will this work on locked and unlocked phones?
Click to expand...
Click to collapse
Hello, have you found a solution? I've got same problem!!!!
linsspinho said:
Hello, have you found a solution? I've got same problem!!!!
Click to expand...
Click to collapse
yes...I´ve flashed stock Blur_Version.14.71.8.falcon_umtsds.Brasil.en.BR, and then updated everything by OTA and now it´s running fine
w0mbl3 said:
My Australian-bought XT1033 (dual sim) got Kitkat today.
System version is:
171.44.31.falcon_umtsds.AsiaRetail.en.03
Looking into installing CWM - got adb working so will flash recovery and take a nandroid.
update: bah, just found that unlocking bootloader would void my warranty and requires a unique key from Motorola, so sorry, can't install CWM - phone is too new to void warranty until I'm sure it doesn't have any faults (this is my first non-Nexus phone so didn't realise bootloader unlocking would be so irritating).
edit: lol, looks like its already here on the forums, cool.. http://forum.xda-developers.com/showthread.php?t=2639384
Click to expand...
Click to collapse
I have the same XT1033 dual sim with 16GB and updated it to KitKat OTA. My Moto G was a grey import (into Australia) destined for India (it came with a Motorola charger and handsfree).
The system version is: 171.44.31.falcon_umtsds.AsiaRetail.en.03. This update does not break USB OTG functionality, it's the same update that was rolled out in India. It now shows OTG capability in Settings > Storage (see the bottom where it says USB Disk). I haven't used it yet, but here's a video below demonstrating it:
https://www.youtube.com/watch?v=9QLD8OknwyM
Here is a request to those that have updated to KitKat, is the OTG working after the update and which version was it?
And can someone upload the "171.44.31.falcon_umtsds.AsiaRetail.en.03.zip" update. I want to unlock and root, but also want to be able to return to the original stock rom later. :angel:
If you haven't updated yet, I think you can pull the file after you've downloaded it from the /Cache/ directory using adb. After downloading it, it will ask you whether to update later, choose later then pull the file to the desktop. I forgot to do this step...
Thanks :victory:
/EDIT
Nevermind, the Motorola naming of updates had me confused. The file that I was after was actually "Blur_Version.14.85.4.falcon_umtsds.AsiaRetail.en.03.zip" which can be found here: http://forum.xda-developers.com/showpost.php?p=49390749&postcount=1
When updated the version and baseband will be:
Baseband: MSM8626BP_1032.355.66.00R
System: 171.44.31.falcon_umtsds.AsiaRetail.en.03
Kernel:3.4.0-g9f5dcdc
Build num:KXB20.25-1.31
http://forum.xda-developers.com/showpost.php?p=50173342&postcount=56
biscoitu said:
yes...I´ve flashed stock Blur_Version.14.71.8.falcon_umtsds.Brasil.en.BR, and then updated everything by OTA and now it´s running fine
Click to expand...
Click to collapse
How did you do this? Is there any tutorial?
Kempf said:
How did you do this? Is there any tutorial?
Click to expand...
Click to collapse
Here is a guide to flash a full ROM:
http://forum.xda-developers.com/showthread.php?t=2542219
After that, you can flash an update OTA or from a zip.
It's not that easy, but it's a tutorial. Thanks!
Kempf said:
It's nota that easy, bit it's a tutorial. Thanks!
Click to expand...
Click to collapse
Just be prepared to do a bit of reading and research on the device and what you want to do with it. After a few years away from all this it can be a little overwhelming for me. If you can understand the process and learn from the mistakes others have made, you'll avoid them yourself. Be patient and think ahead, be sure of what you are doing and why then you won't have too many problems.
it's full lollipop 5.0.2 based on m8d(China telecom dualsim version) official lollipop ota 4.25.1402.6. some drivers from India m8sd lollipop test release.
use my lollipop schkernel. source:https://github.com/schqiushui/kernel_lollipop_sense_m8ace
WARNING!!!
1. S-OFF
2. update firmware
3. the m8sd firmware is a test release, and the m8sw firmware is my modified for test but just works for me. so, it depends on your choice.
4. suggest twrp 2.8.5.1
DOWNLOAD LINKS
m8sw firmware : 链接link: http://pan.baidu.com/s/1pJun0Cz 密码password: y1q4
m8sd firmware : on this thread #176 http://forum.xda-developers.com/one-e8/help/htc-one-e8-mid-cid-ruu-ota-twrp-t2903210
ROM link: 链接link: http://pan.baidu.com/s/1wFPKE 密码password: aw3t
DONATIONS
paypal : [email protected]
alipay : [email protected]
SCREENSHOTS
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
seems to be the first:fingers-crossed:
schqiushui said:
based on M8d 4.25.1402.6
use my lollipop schkernel. source:https://github.com/schqiushui/kernel_lollipop_sense_m8ace
WARNING!!!
1. S-OFF
2. update firmware
3. the m8sd firmware is a test release, and the m8sw firmware is my modified for test but just works for me. so, it depends on your choice.
4. suggest twrp 2.8.5.1
DOWNLOAD LINKS
m8sw firmware : 链接link: http://pan.baidu.com/s/1pJun0Cz 密码password: y1q4
m8sd firmware : on this thread #176 http://forum.xda-developers.com/one-e8/help/htc-one-e8-mid-cid-ruu-ota-twrp-t2903210
ROM link: 链接link: http://pan.baidu.com/s/1wFPKE 密码password: aw3t
DONATIONS
paypal : [email protected]
alipay : [email protected]
SCREENSHOTS
View attachment 3208621
View attachment 3208622
View attachment 3208623
View attachment 3208624
View attachment 3208625
Click to expand...
Click to collapse
I am using BinDroid. Will this ROM fit well for my HTC One E8 dual sim ?
kamrul.auntu said:
I am using BinDroid. Will this ROM fit well for my HTC One E8 dual sim ?
Click to expand...
Click to collapse
You just need firmware. And to flash unsigned firmware you need to be s-off.
If you flash the correct firmware it will
@schqiushui why are navbar icons KK?
modding the rom so we can use it as well
Anything for the m8sx single sim ?
Sent from my HTC One_E8 using XDA Free mobile app
DutchDanny said:
@schqiushui why are navbar icons KK?
Click to expand...
Click to collapse
100% stock. so there's no google service. I just added muiti languages. still use my schkernel.
DutchDanny said:
@schqiushui why are navbar icons KK?
Click to expand...
Click to collapse
100% stock. so there's no google service. I just added muiti languages. still use my schkernel.
Eiad Ajam said:
Anything for the m8sx single sim ?
Sent from my HTC One_E8 using XDA Free mobile app
Click to expand...
Click to collapse
sorry,I dont have m8sx single sim,so please wait for ota to update firmware and lollipop.
tried your Mecdwgl firmware on my M8sd but no signal. have to flash mecdugl mod fw then flash radio only from mecdwgl to make it work
ftorres said:
tried your Mecdwgl firmware on my M8sd but no signal. have to flash mecdugl mod fw then flash radio only from mecdwgl to make it work
Click to expand...
Click to collapse
now u got signal,right? is there 4g on ur m8sd?
cnt download
D host wants us to use its own download manager , which is very slow. . Pls provide alternate link or another host kindly pls
Yes, have signal, 3G only.
ftorres said:
Yes, have signal, 3G only.
Click to expand...
Click to collapse
Do u choose m8sd in aroma install?
harrydey1 said:
D host wants us to use its own download manager , which is very slow. . Pls provide alternate link or another host kindly pls
Click to expand...
Click to collapse
sorry, I am in China. GFW is very strong. so please wait someone update a mirror.
Is it pure Lollipop or just themed with base 4.4.4
Is it pure Lollipop or just themed with base 4.4.4, coz lollipop officially is not out yet right..
is it base is android 5 ??
---------- Post added at 06:19 PM ---------- Previous post was at 06:15 PM ----------
schqiushui said:
sorry, I am in China. GFW is very strong. so please wait someone update a mirror.
Click to expand...
Click to collapse
in india speed is slow in 3g too so cant download it, hope some1 helps us plsssss
schqiushui said:
Do u choose m8sd in aroma install?
Click to expand...
Click to collapse
Actually I tried both m8sd and m8sw. Both can only 3G. Maybe because I could only use m8sd radio.
it's full lollipop 5.0.2 based on m8d(China telecom dualsim version) official lollipop ota 4.25.1402.6. some drivers from m8sd India test release. the lollipop kernel is finished already a month ago, just wait firmware and some drivers.
YOUR WARRANTY IS NOW VOID. USE IT AT YOUR OWN RISK! I AM NOT RESPONSIBLE FOR ANY DAMAGES OR BRICKS THAT MIGHT HAPPEN UPON FLASHING. YOU HAVE BEEN WARNED!!!
REQUIREMENTS
Flashfile + Drivers + Flashtool:https://www.androidfilehost.com/?fid=24349802275799349
A good working PC that is able to hold battery power for at least 15 minutes in case of any power outages
A good working USB Cable
Internet connection for automatic update of VCOM and Preloader drivers
Of Course Desire 820s with at least 50% battery power
Flashing experience
Confirmed to be working on Desire 820s, ts and ys variants so far. NOT Yet tested on the Desire 820us variant
Please know that you will not be able to install any OTA for this firmware because it is not the original firmware for your device.
REMEMBER This is a full firmware flash and not just a ROM so you MUST know how to revert to your original firmware in case of repairs by warranty.
This Procedure will format your Internal SD Card so please backup before proceeding
HOW TO FLASH WITH SP FLASH TOOL
1. Extract the Downloaded Lollipop Flashfile
2. Install The Drivers Inside *MTK_UsbDriver_autorun_1.0.14_internal.rar*
3. Use The Included Flash tool Click on Scatter-loading by the right
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
4. In the window that pops up, select MT6752_Android_scatter in the Lollipop Flashfile folder
5. A list with ticked boxes should appear in SP flash tool
6. Select Firmware Upgrade***********************VERY IMPORTANT OR YOU WILL BREAK YOUR PHONE*********
7. Click Download
8. Stop should now be prominent while other options should be grayed out
9. Switch off your phone and wait for at least 10 seconds after it has switched off
11. Connect the switched off phone to the PC via USB cable Press the power button once or twice until pc detects the Phone
12. A progress bar should start running
13. DO NOT INTERRUPT. Wait until you get a Success message (green circle with OK)
14. Disconnect USB cable and switch on the phone
CREDITS
nkk71 for decrypting RUU.
Gibz97 For finding the RUU , and all the valuable information he gave to us ,and of course the well designed thread
Screenshots
Mohamed Yaser said:
CREDITS
nkk71 for decrypting RUU.
Gibz97 For finding the RUU , and all the valuable information he gave to us ,and of course the well designed thread.
Click to expand...
Click to collapse
Great work. So you've installed this European Firmware in your 820s. Just curious to know the region of your 820s? And does v5.0.2 has Cast Screen feature? Request you to post a few screenshots of Camera App.
Thank you very much bro :good:
TWRP for WWE version is ready
Gibz97 said:
Thank you very much bro :good:
TWRP for WWE version is ready
Click to expand...
Click to collapse
I have this error? what I must to do to fix this?
Pana03 said:
I have this error? what I must to do to fix this?
Click to expand...
Click to collapse
Hold volume up and volume down when connecting to PC until when it starts to flash
Ok,i will try later.. tnx
PrateekBHT said:
Great work. So you've installed this European Firmware in your 820s. Just curious to know the region of your 820s? And does v5.0.2 has Cast Screen feature? Request you to post a few screenshots of Camera App.
Click to expand...
Click to collapse
mine was HTC_HK version and it went smoooothly , i will upload screens in next post
Here
Gibz97 said:
Thank you very much bro :good:
TWRP for WWE version is ready
Click to expand...
Click to collapse
we have to unlock bl first ,, will it wipe my data ?
Mohamed Yaser said:
we have to unlock bl first ,, will it wipe my data ?
Click to expand...
Click to collapse
Yes it will wipe data. Just try to see if you will be sent the unlock code
Gibz97 said:
Hold volume up and volume down when connecting to PC until when it starts to flash
Click to expand...
Click to collapse
I try now,for now everthing is good,downloading now,i wait to finish,i will post when finish.. Tnx Gibz
Android is upgrading.. nice I will test rom..
Pana03 said:
I try now,for now everthing is good,downloading now,i wait to finish,i will post when finish.. Tnx Gibz
Android is upgrading.. nice I will test rom..
Click to expand...
Click to collapse
Please share a photo of the bootloader
Gibz97 said:
Please share a photo of the bootloader
Click to expand...
Click to collapse
ok bro.. wait little bit..
see bro..
Gibz97 said:
Hold volume up and volume down when connecting to PC until when it starts to flash
Click to expand...
Click to collapse
I did that, and I got this error. Any solution?
Pana03 said:
ok bro.. wait little bit..
see bro..
Click to expand...
Click to collapse
Same story like the Taiwanese Firmware
---------- Post added at 12:06 PM ---------- Previous post was at 11:54 AM ----------
amirarsyad97 said:
I did that, and I got this error. Any solution?
Click to expand...
Click to collapse
Use SP Flash Tool v5.1532.00, the one I uploaded on my thread. Unfortunately it seems like @Mohamed Yaser uploaded the wrong version
Gibz97 said:
Same story like the Taiwanese Firmware
---------- Post added at 12:06 PM ---------- Previous post was at 11:54 AM ----------
Use SP Flash Tool v5.1532.00, the one I uploaded on my thread. Unfortunately it seems like @Mohamed Yaser uploaded the wrong version
Click to expand...
Click to collapse
No , he just broke his partitions as i got in his PM
He must use Kitkat preloader frist
Simply
-Flash kk
-Then flash lp
Gibz97 said:
Use SP Flash Tool v5.1532.00, the one I uploaded on my thread. Unfortunately it seems like @Mohamed Yaser uploaded the wrong version
Click to expand...
Click to collapse
My bad. I'm using v5.1452.00. Problem now fixed. But now the imei and cid still the same as the taiwanese firmware. And I can't unlock bootloader (invalid cid).
I tried to flash twrp using flashtool even the bootloader is locked. But I can't reboot to recovery and software status changed to modified. (that is expected). Surprisingly, I can reboot to recovery after flashing the stock one.
Help Please...
A little noob questions...
1. How to know if my device is us/ys/ts variant?
2. Do i need to unlock the bootloader to flash the rom?
3. How to root KitKat on my Desire 820s without bricking for backing up my IMEI?
goldenevil47 said:
A little noob questions...
1. How to know if my device is us/ys/ts variant?
2. Do i need to unlock the bootloader to flash the rom?
3. How to root KitKat on my Desire 820s without bricking for backing up my IMEI?
Click to expand...
Click to collapse
1. You can see that on the back of you phone,there write like this: ''Model820ts(or ys or us)''
2.I mean no,only follow tutorial and you will flash firmwork easy..
3.I don't know answer for this question..
:good::good::laugh:
---------- Post added at 10:41 AM ---------- Previous post was at 10:39 AM ----------
Gibz97 said:
Same story like the Taiwanese Firmware
---------- Post added at 12:06 PM ---------- Previous post was at 11:54 AM ----------
Use SP Flash Tool v5.1532.00, the one I uploaded on my thread. Unfortunately it seems like @Mohamed Yaser uploaded the wrong version
Click to expand...
Click to collapse
Yeah same story,i try to get code from htcdev.com for unlocking bootloader but I failed..
I have recieved Android 10 update on my G7. Everything is working great and UI is much more beautiful and very fast dark mode is also good. Camera is also improved alot. The latest security patch is included with the update.
Android 10 Beta Preview for LG G7: https://youtu.be/XmhDJSpCqUc
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Android q
E?
Beta or Stable?
N? a Korean version?
My Europe DEC got update today with patch january. He got the korean with beta version. We should get it in the summer somewhere
Sent from my LM-G710 using XDA Labs
Can you please post the update for the Korean open version?
Hi @Z333D,
I also own a G710N but I haven't any opportunity to update my phone; how did you get the opportunity to update to the 10 beta?
I only haven't a korean carrier since i'm not living in Korea. Do you think it can be the reason?
Thanks,
benf
Your account must be registered in Korea. Use the link https://kr.m.lgaccount.com/login/sign_in
---------- Post added at 01:11 AM ---------- Previous post was at 01:06 AM ----------
If you have the Korean open version, please save the file stored in the root folder before install and post here. Thanks.
LG G7 Android 10 Preview
Here is Android 10 walkthrough video for LG G7.
About https://youtu.be/XmhDJSpCqUc?t=4
Launcher, Notification, Recent Apps https://youtu.be/XmhDJSpCqUc?t=16
Phone https://youtu.be/XmhDJSpCqUc?t=61
Messaging https://youtu.be/XmhDJSpCqUc?t=75
Calculator https://youtu.be/XmhDJSpCqUc?t=88
Clock https://youtu.be/XmhDJSpCqUc?t=96
Calendar https://youtu.be/XmhDJSpCqUc?t=108
File manager https://youtu.be/XmhDJSpCqUc?t=120
HD Audio Recorder https://youtu.be/XmhDJSpCqUc?t=131
Gallery https://youtu.be/XmhDJSpCqUc?t=145
Music https://youtu.be/XmhDJSpCqUc?t=160
Camera https://youtu.be/XmhDJSpCqUc?t=192
Settings https://youtu.be/XmhDJSpCqUc?t=272
Pauloeder said:
E?
Click to expand...
Click to collapse
No its N.
kukuteku said:
Beta or Stable?
Click to expand...
Click to collapse
Its the beta.
maXDAmn said:
N? a Korean version?
Click to expand...
Click to collapse
Yeah.
Don1003 said:
My Europe DEC got update today with patch january. He got the korean with beta version. We should get it in the summer somewhere
Click to expand...
Click to collapse
Yes I think so.
Luis Fuentes Cerda said:
Can you please post the update for the Korean open version?
Click to expand...
Click to collapse
How?
benfruru said:
Hi @Z333D,
I also own a G710N but I haven't any opportunity to update my phone; how did you get the opportunity to update to the 10 beta?
I only haven't a korean carrier since i'm not living in Korea. Do you think it can be the reason?
Thanks,
benf
Click to expand...
Click to collapse
You can update via Help app if you have N model but you will need lg account registered in korea just.
How's battery
Z333D said:
Here is Android 10 walkthrough video for LG G7.
About https://youtu.be/XmhDJSpCqUc?t=4
Launcher, Notification, Recent Apps https://youtu.be/XmhDJSpCqUc?t=16
Phone https://youtu.be/XmhDJSpCqUc?t=61
Messaging https://youtu.be/XmhDJSpCqUc?t=75
Calculator https://youtu.be/XmhDJSpCqUc?t=88
Clock https://youtu.be/XmhDJSpCqUc?t=96
Calendar https://youtu.be/XmhDJSpCqUc?t=108
File manager https://youtu.be/XmhDJSpCqUc?t=120
HD Audio Recorder https://youtu.be/XmhDJSpCqUc?t=131
Gallery https://youtu.be/XmhDJSpCqUc?t=145
Music https://youtu.be/XmhDJSpCqUc?t=160
Camera https://youtu.be/XmhDJSpCqUc?t=192
Settings https://youtu.be/XmhDJSpCqUc?t=272
Click to expand...
Click to collapse
I already have a korean account, but where in their Help app I can find the beta for the g710n?
Edit: Got it! Already downloading it.
Hi, I have the 710 amw LG and I would like to know how I can get the beta? Can someone help me?
mauseu1 said:
Hi, I have the 710 amw LG and I would like to know how I can get the beta? Can someone help me?
Click to expand...
Click to collapse
only for the 710n, which is the Korean version of the G7
If you have the Korean open version, please save the file stored in the root folder before install and post here.
Hi to all,
Thanks @Z333D and Luis Fuentes Cerda.
I had already an lg account registered in Korea so it was easy!
I just had to spent half an hour approx to understand korean language a bit more but, in the end, I success!!
I'm going to install the version 10!
Available to share with you some info or support you with any request,
Sincerily,
Benf
---------- Post added at 04:04 PM ---------- Previous post was at 04:02 PM ----------
Luis Fuentes Cerda said:
If you have the Korean open version, please save the file stored in the root folder before install and post here.
Click to expand...
Click to collapse
Hi,
I guess that, once downloaded, the installation of the new version will be automatic and the tmp file will be deleted after the installation ends.
If you know more, pls let me know and I will be pleasure to share the file.
---------- Post added at 04:07 PM ---------- Previous post was at 04:04 PM ----------
Sorry again @Z333D,
do you know if (and how) to unlock the bootloader on the 710N ?
I'm searching a way since several months but anything good for this model.
Thanks again,
Benf
LG G7 ThinQ LMG710EM running Android 10 beta LG U+.
The update process was the following:
1. Backup
2. Flash https://lg-firmwares.com/downloads-file/21589/G710NP20k_00_LGU_KR_OP_1220 UPGRADE over https://lg-firmwares.com/downloads-file/21597/G710NO20k_00_OPEN_KR_OP_1220 with LGUP (Upgrade option preserve the data)
3. FOTA V28e with Activity Launcher (first entry)
4. FOTA V28j with Activity Launcher
Download the update files from https://youtu.be/zxhQ3oAGIN8
Dishe said:
How's battery
Click to expand...
Click to collapse
I am getting SOT of 7+ hours with auto brits and wifi is always on.
Luis Fuentes Cerda said:
If you have the Korean open version, please save the file stored in the root folder before install and post here.
Click to expand...
Click to collapse
How i can do this i have no experience in this.
benfruru said:
do you know if (and how) to unlock the bootloader on the 710N ?
I'm searching a way since several months but anything good for this model.
Thanks again,
Benf
Click to expand...
Click to collapse
You are welcome. Yes i have been in same situation like you but i have not find any yet there is a 1 thread in this forum where the user followed a v40 tutorial to unlock our model but its not trusted much so i have not tried it yet. But if you find any plz let me know also if i found i will tell you.
Luis Fuentes Cerda said:
LG G7 ThinQ LMG710EM running Android 10 beta LG U+.
The update process was the following:
1. Backup
2. Flash https://lg-firmwares.com/downloads-file/21589/G710NP20k_00_LGU_KR_OP_1220 UPGRADE over https://lg-firmwares.com/downloads-file/21597/G710NO20k_00_OPEN_KR_OP_1220 with LGUP (Upgrade option preserve the data)
3. FOTA V28e with Activity Launcher (first entry)
4. FOTA V28j with Activity Launcher
Download the update files from https://youtu.be/zxhQ3oAGIN8
Click to expand...
Click to collapse
Nice dude :good:
cheeze.keyk said:
I already have a korean account, but where in their Help app I can find the beta for the g710n?
Edit: Got it! Already downloading it.
Click to expand...
Click to collapse
I opened the korean account but when I try to update ut gives me this message :
"Error while signing up
There was an error applying for subscription.
There is no phone registration information."
Canyou please lust the steps you did to get it to work ?
Z333D said:
I am getting SOT of 7+ hours with auto brits and wifi is always on.
How i can do this i have no experience in this.
You are welcome. Yes i have been in same situation like you but i have not find any yet there is a 1 thread in this forum where the user followed a v40 tutorial to unlock our model but its not trusted much so i have not tried it yet. But if you find any plz let me know also if i found i will tell you.
Nice dude :good:
Click to expand...
Click to collapse
That tutorial is completely legit tons of people have used it...
I install this rom in mate 20 x
https://drive.google.com/file/d/1aCiUQekB_UONZieqGlsnMgATbgkeFAI8/view
after finis step I get this in my mate 20 x
https://i.top4top.io/p_15935y9rl1.jpg
this is my mate 20x before install that rom
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
please anybody can help me ??
please
I have the same problem .....
:crying:
Press 2,enter in erecovery and restore your device
@virusman222
Your device is not a hw/spcseas C636.
Use 'fastboot getvar vendorcountry' to get your device vendorcountry.
Then flash accordingly the right region emui10 cust&preload for your device's vendorcountry.
virusman222 said:
I install this rom in mate 20 x
https://drive.google.com/file/d/1aCiUQekB_UONZieqGlsnMgATbgkeFAI8/view
after finis step I get this in my mate 20 x
https://i.top4top.io/p_15935y9rl1.jpg
this is my mate 20x before install that rom
please anybody can help me ??
please
Click to expand...
Click to collapse
Had the same problem. Tried to install 432, I was pretty sure I had European version. I was wrong.
Installed 636 and it worked.
letschky said:
Press 2,enter in erecovery and restore your device
Click to expand...
Click to collapse
erecovery does nothing for me, it says server failed...
---------- Post added at 04:54 PM ---------- Previous post was at 04:52 PM ----------
ptr21 said:
Had the same problem. Tried to install 432, I was pretty sure I had European version. I was wrong.
Installed 636 and it worked.
Click to expand...
Click to collapse
Ive tried all the 636 links from here using dload and nothing...:
https://forum.xda-developers.com/mate-20-x/how-to/firmware-emui-9-1-l29-al00-dload-method-t3960425
thanks to all
recovery mode does nothing
salvakachu said:
erecovery does nothing for me, it says server failed...
---------- Post added at 04:54 PM ---------- Previous post was at 04:52 PM ----------
Ive tried all the 636 links from here using dload and nothing...:
https://forum.xda-developers.com/mate-20-x/how-to/firmware-emui-9-1-l29-al00-dload-method-t3960425
Click to expand...
Click to collapse
Are you sure you have 636?
ptr21 said:
Are you sure you have 636?
Click to expand...
Click to collapse
Similarly to the OP, my phone said C636E3 in the version build... I cannot check it anymore since it always says now 'invalid operating system'...
salvakachu said:
Similarly to the OP, my phone said C636E3 in the version build... I cannot check it anymore since it always says now 'invalid operating system'...
Click to expand...
Click to collapse
I dont know...
If you already have softbricked device it doesnt harm your device to try other versions than 636.
ptr21 said:
I dont know...
If you already have softbricked device it doesnt harm your device to try other versions than 636.
Click to expand...
Click to collapse
yeah I will do that...
You have to flash the correct firmware that was on it before it works again
oslo83 said:
@virusman222
Your device is not a hw/spcseas C636.
Use 'fastboot getvar vendorcountry' to get your device vendorcountry.
Then flash accordingly the right region emui10 cust&preload for your device's vendorcountry.
Click to expand...
Click to collapse
OP's and others devices on this thread are now fixed with correct emui10 firmware for their region.
oslo83 said:
OP's and others devices on this thread are now fixed with correct emui10 firmware for their region.
Click to expand...
Click to collapse
yes
Thanks for you man ????????
I recommend this man if anybody have same issue
I'm having same type of issue that Hisuite has caused. I purchased the Mate 20 X from someone which is supposed to be l29 global. Hisuite told me I had an update, did it and now get your device loaded different OS.
I feel I just lost $700
Im not even sure what my vendor is on this as it happen all to quickly.
Erecovery gives error via wifi method
oslo83 said:
@virusman222
Your device is not a hw/spcseas C636.
Use 'fastboot getvar vendorcountry' to get your device vendorcountry.
Then flash accordingly the right region emui10 cust&preload for your device's vendorcountry.
Click to expand...
Click to collapse
I have vendor hw/eu via fastboot i am assuming thats C432? Also my issue is Hisuite itself updated my mate 20 X to something it wasnt supposed to be and have these problems https://imgur.com/a/8iLsOlv
Hello,
First of all, I'm sorry if I'm not in the right forum, but on the Mate 20 Lite forums, I'm not getting any responds...
I have a Huawei Mate 20 Lite, SNE-LX1 C432
I upgraded to EMUI 10 using the sd card update method a while ago, and ever since when I boot the phone "your device has loaded a different operating system" shows up.
I searched every thread I could, even this one, and tried a lot of things, but I just can't fix it...
Every time I download a firmware for the SNE-LX1 C432 and unzip it, I always get the SNE-LO1 cust file and preload file, but I can't find the SNE-LX1 cust file and preload file anywhere.
Does anyone know how to get the right cust file and preload file?
Any help is appreciated...
Thanks