Database Info

[REMODEL][S-OFF NEEDED] M8SW China Remodel to M8SW EU

I wrote a blog post on how you can change your M8sw from China to M8sw EU
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I did this with mine, and works great.
I'm not sure if other models like M8sd can do this, but you can try.
There is no risk in Bricking your device, just make sure you have a RUU from your model as backup
READ HERE HOW TO

DutchDanny said:
I wrote a blog post on how you can change your M8sw from China to M8sw EU
I did this with mine, and works great.
I'm not sure if other models like M8sd can do this, but you can try.
There is no risk in Bricking your device, just make sure you have a RUU from your model as backup
READ HERE HOW TO
Click to expand...
Click to collapse
This weekend I'll try it.

Do I have to copy all extrated folders and files into ExternalSD/TWRP/BACKUPS/"YOUR_TWRP_ID"/2014-09-20--23-57-56 KOT49H release-keys?? Or only files that are at the folder TWRP 1.21.401.3??

In the folder there should only be the files from the backup

I've got it. Device remodelled and official lollipop OTA installed.
Great job once again!

Hi I cant enter in your site show this message: Error displaying the error page: Application Instantiation Error: Could not connect to MySQL.
---------- Post added at 09:04 PM ---------- Previous post was at 08:53 PM ----------
please put all steps here to do remodel

samuelbahia said:
Hi I cant enter in your site show this message: Error displaying the error page: Application Instantiation Error: Could not connect to MySQL.
---------- Post added at 09:04 PM ---------- Previous post was at 08:53 PM ----------
please put all steps here to do remodel
Click to expand...
Click to collapse
Site is back

The recovery cant write the files in the folder. I stopped on step 3 because i cant advance here
The screen of recovery is empty and dont show nothing on sd
this eu m8sw work 4g LTE?

Thank you for your work!
I don't think I completely understand the last bit
After this, install a custom recovey and make a backup from it.
Safe this on your PC.
If a new OTA comes, you can use this BACKUP to get the Official EU OTA.
If an OTA comes, make sure you flash this firmware before install:
m8sw_2.33.401.3_EU_firmware.zip
Click to expand...
Click to collapse
Do you mean every new OTA will still be a chinese OTA?
And if the solution is to flash EU firmware then why not flash it right away? Am I missing something here?

I have already lollipop in my e8 m8sw. Have any way to suport multilanguages?

samuelbahia said:
I have already lollipop in my e8 m8sw. Have any way to suport multilanguages?
Click to expand...
Click to collapse
If your rooted, look in Playstore for: More Locale
Send via my CM 12 Gtab3

How remove all chinese language and change for english or another language, like portuguese?

samuelbahia said:
How remove all chinese language and change for english or another language, like portuguese?
Click to expand...
Click to collapse
If you remodel there are no Chinese languages
Send via my CM 12 Gtab3

Rooted
What is the advantage of remodeling my M8SW China Remodel to M8SW EU? Is it a problem if my phone is already on android 5.02?

venezuelafotos said:
What is the advantage of remodeling my M8SW China Remodel to M8SW EU? Is it a problem if my phone is already on android 5.02?
Click to expand...
Click to collapse
Get rid of all chinese stuff.
EU bands
And less icons in statusbar
You can remodel even if your on L
Just follow the instructions
Send via my CM 12 Gtab3

DutchDanny said:
Get rid of all chinese stuff.
EU bands
And less icons in statusbar
You can remodel even if your on L
Just follow the instructions
Send via my CM 12 Gtab3
Click to expand...
Click to collapse
i also have question like the other guy from page 1.
Why do we have to do this step?
If a new OTA comes, you can use this BACKUP to get the Official EU OTA.
If an OTA comes, make sure you flash this firmware before install:
m8sw_2.33.401.3_EU_firmware.zip
why do we have to install that firmware before flashing OTA? isnt the phone already changed to EU?

HI Danny i would like to ask if send the clear instructions? where could i get the RUU recovery apk? and should is transfer the ADB apk to my HTC one e8 unit? im looking forward for your favorable response BTW im newbie and NOOB hehehe

Clear instructions and downloads can be found on my website
Send via my CM 12 Gtab3

DutchDanny said:
Clear instructions and downloads can be found on my website
Send via my CM 12 Gtab3
Click to expand...
Click to collapse
0PAIMG.zip inst installing on my phone. When i do fastboot reboot, the phone quickly scans my sdcard for an image but doesnt install. I have put the file on root of my card. Is there any way to verify if the zip file is Ok?
******update
Fixed my issue. The problem was cuz i was using 16GB card, I used a 4GB card and now its updating. thanks. But i still dont get the part where we have to flash m8sw_2.33.401.3_EU_firmware.zip when a new OTA comes. Why do we need to do this? and do we need to do it everytime an OTA comes?

DutchDanny said:
Clear instructions and downloads can be found on my website
Send via my CM 12 Gtab3
Click to expand...
Click to collapse
Hi danny im starting follow all your instructions but i dont have any idea how to go to CID flow instructions? when i run adb and fastboot the screen of my laptop was do nothing.. could you please give me a clear instructions? thank you very much

huawei y6 pro tit-u02 flashing recovery size is too large

Hi everybody
i've unlocked my bootloader and i was trying to flash a custom cwm recovery
following this rooting method
but after unlocking the bootloader i can't flash the recovery due to 'size is too large' error
[btw]-> the phone returns back to the fastboot screen after unlocking ..
so i tried to reboot it manually and return to fastboot menu but the same problem goes on ..
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
any idea ? !

Ahegazipro said:
Hi everybody
i've unlocked my bootloader and i was trying to flash a custom cwm recovery
following this rooting method
but after unlocking the bootloader i can't flash the recovery due to 'size is too large' error
[btw]-> the phone returns back to the fastboot screen after unlocking ..
so i tried to reboot it manually and return to fastboot menu but the same problem goes on ..
any idea ? !
Click to expand...
Click to collapse
You should ask in the thread that you linked, that's what the thread is for, the OP there can help you.
Sent from my SM-S903VL using Tapatalk

Droidriven said:
You should ask in the thread that you linked, thats what the thread is fot, the OP there can help you.
Sent from my SM-S903VL using Tapatalk
Click to expand...
Click to collapse
ok thanks
i've already asked him in the thread but i thought it's a common problem...

Did you found the solution ?

kyrillos25 said:
Did you found the solution ?
Click to expand...
Click to collapse
NO

Ahegazipro said:
NO
Click to expand...
Click to collapse
Mine is worse i don't have fastboot and i deleted the recovery :crying:
---------- Post added at 11:53 PM ---------- Previous post was at 11:40 PM ----------
kyrillos25 said:
Mine is worse i don't have fastboot and i deleted the recovery :crying:
Click to expand...
Click to collapse
Any idea how to return to fastboot ?

kyrillos25 said:
Mine is worse i don't have fastboot and i deleted the recovery :crying:
---------- Post added at 11:53 PM ---------- Previous post was at 11:40 PM ----------
Any idea how to return to fastboot ?
Click to expand...
Click to collapse
Try a JTAG service or replace the motherboard.
Sent from my SM-S903VL using Tapatalk

Droidriven said:
Try a JTAG service or replace the motherboard.
Sent from my SM-S903VL using Tapatalk
Click to expand...
Click to collapse
Does MT6735M Scatter File works on MT6735P ?

kyrillos25 said:
Does MT6735M Scatter File works on MT6735P ?
Click to expand...
Click to collapse
I dont know things like that bout any kind of mtk device.
Sent from my SM-S903VL using Tapatalk

Droidriven said:
I dont know things like that bout any kind of mtk device.
Sent from my SM-S903VL using Tapatalk
Click to expand...
Click to collapse
where can i find JTAG Files?

Droidriven said:
I dont know things like that bout any kind of mtk device.
Sent from my SM-S903VL using Tapatalk
Click to expand...
Click to collapse
.
can u plz tell me where to find the files needed to use in j tag process
it called dump files i guess where to find it ?

Johnathan94 said:
.
can u plz tell me where to find the files needed to use in j tag process
it called dump files i guess where to find it ?
Click to expand...
Click to collapse
It requires having a JTAG device to do it. I meant send it to a repair shop that has the equipment for a JTAG service.
Sent from my SM-S903VL using Tapatalk

Put a larger mikro sd, by 16 or 32

DimDimih said:
Put a larger mikro sd, by 16 or 32
Click to expand...
Click to collapse
That has nothing to do with the issue that this thread is about. Recovery is not flashed onto the microSD card, it's flashed on internal memory, so a larger SD card won't help.
You need to learn some more before giving advice.
Sent from my SM-S903VL using Tapatalk

hello:i tried to root this phone with king root and now it reboot itself; flashing with sd card doesnt work. how to fix this?

Ahegazipro said:
Hi everybody
i've unlocked my bootloader and i was trying to flash a custom cwm recovery
following this rooting method
but after unlocking the bootloader i can't flash the recovery due to 'size is too large' error
[btw]-> the phone returns back to the fastboot screen after unlocking ..
so i tried to reboot it manually and return to fastboot menu but the same problem goes on ..
any idea ? !
Click to expand...
Click to collapse
How did u unlock the bootloader?Official Method?
Cuz mine says "failed to unlock,phone unlocked" in command window even though it is not unlocked
My model:HUAWEI TIT-U02 running emui 3.1

Honor 9 Stock ROM B155 with Root Built In for China Models

!!!For Experienced User Only!!!
Note: Suggest to flash this only if you are already on B155 stock ROM. If you flash this over other version, eg. B136, it will show the rom version is B136, not B155, but your phone's functions are still working.
Credits to [email protected] Team from Club.Huawei.Com
Features:
- include Root
- init.d boot scripts supported
- odex, easy for DIY your own "Stock ROM"
How to Use:
- unzip
- execute run.bat
- follow instructions to flash via fastboot mode
Download:
MEGA
If you are unable to boot after flash or encounter any issue, flash BOOT patch.

Any chance, that'll you mirror the latest B166 with exposed?
http://club.huawei.com/viewthreadun...or-orderby-dateline-typeid-4533-page-1-1.html

Where I can find EU-Model?
I need to restore my smartphone but can't find any EU-Firmware

Arcangelo88 said:
Where I can find EU-Model?
I need to restore my smartphone but can't find any EU-Firmware
Click to expand...
Click to collapse
Try firmware finder, download fullOTA

dragon-tmd said:
Any chance, that'll you mirror the latest B166 with exposed?
http://club.huawei.com/viewthreadun...or-orderby-dateline-typeid-4533-page-1-1.html
Click to expand...
Click to collapse
https://cloud.mail.ru/public/EVZb/dJJWdw4Xz

Honor 9
Hi all,
Can I use this rom to flash my Honor 9 (model number STF-AL00 build number STF-al00c00b155) in order to have Google apps and play store??
Thanks for your help

Parsifa86 said:
Hi all,
Can I use this rom to flash my Honor 9 (model number STF-AL00 build number STF-al00c00b155) in order to have Google apps and play store??
Thanks for your help
Click to expand...
Click to collapse
See this guide https://forum.xda-developers.com/honor-9/how-to/installing-gapps-suite-honor-9-chinese-t3662106

Parsifa86 said:
Hi all,
Can I use this rom to flash my Honor 9 (model number STF-AL00 build number STF-al00c00b155) in order to have Google apps and play store??
Thanks for your help
Click to expand...
Click to collapse
If you only want Google apps, then this ROM is not suitable for you.
Sent from my Honor 8 using XDA Labs

honor 9 chinese version
adriansticoid said:
If you only want Google apps, then this ROM is not suitable for you.
Sent from my Honor 8 using XDA Labs
Click to expand...
Click to collapse
I want to convert my chinese phone from chinese to Italian, because at the moment :
When I open the drawer i see the chinese apps (no google apps)
When I open the browser i see all pages in chienese;
When I open the vocal assistant all commands are in chinese;
ecc
my target is to have a software that seems like the officiale european software, is this the right ROM to install on my device??
can you help me to get this target??
thank you so much
bye bye

Hi everybody,
I just got an HONOR 9 STF-AL10 from china, and I would like to flash it and get an EU or US stock rom, and I can't find it online anywhere ... can anyone direct me to an URL ? thank you !

Amine2122 said:
Hi everybody,
I just got an HONOR 9 STF-AL10 from china, and I would like to flash it and get an EU or US stock rom, and I can't find it online anywhere ... can anyone direct me to an URL ? thank you !
Click to expand...
Click to collapse
Hi, same here, did you solve it?

tezz55 said:
Hi, same here, did you solve it?
Click to expand...
Click to collapse
Look at this thread
https://forum.xda-developers.com/honor-9/how-to/guide-honor-9-t3653719

gopinaidu77 said:
Look at this thread
https://forum.xda-developers.com/honor-9/how-to/guide-honor-9-t3653719
Click to expand...
Click to collapse
Thank You! I will try it.
I think I bricked tho phone twice (chinese). After unlocking, installing TWRP I was not able to backup, I tried to flash first the stock EU, then the Lineage but they didn't work.

gopinaidu77 said:
Look at this thread
https://forum.xda-developers.com/honor-9/how-to/guide-honor-9-t3653719
Click to expand...
Click to collapse
I received the notification but I can't see your post in the thread.
Anyway, I unlock the bootloader; I installed the TWRP recovery using fastboot; In recovery mode I wasn't able to make a backup since there was an issue: "Cannot create folder data/media/0/TWRP" Permission denied.
I tried to install the ROM anyway, since I had no useful data on the phone but then the bootloop started.
I was able to download again files for the factory reset .
I guessed the problem is root access or TWRP wrong version. Any advices? Thanks a lot!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

tezz55 said:
I received the notification but I can't see your post in the thread.
Anyway, I unlock the bootloader; I installed the TWRP recovery using fastboot; In recovery mode I wasn't able to make a backup since there was an issue: "Cannot create folder data/media/0/TWRP" Permission denied.
I tried to install the ROM anyway, since I had no useful data on the phone but then the bootloop started.
I was able to download again files for the factory reset .
I guessed the problem is root access or TWRP wrong version. Any advices? Thanks a lot!
Click to expand...
Click to collapse
Please double check the version of twrp u installed

gopinaidu77 said:
Please double check the version of twrp u installed
Click to expand...
Click to collapse
I don't know the version exactly, I think it is 3.1.1, but the one I installed is 32.028 KB, while the V2 rom in your link is 33.798 KB. That might by the problem, even though I am not sure the backup error might be related to that.
Anyway I'm a newbie, so...

tezz55 said:
I don't know the version exactly, I think it is 3.1.1, but the one I installed is 32.028 KB, while the V2 rom in your link is 33.798 KB. That might by the problem, even though I am not sure the backup error might be related to that.
Anyway I'm a newbie, so...
Click to expand...
Click to collapse
I suggest u to install latest version All the time.

gopinaidu77 said:
I suggest u to install latest version All the time.
Click to expand...
Click to collapse
I will try. Do you think I need to do something else about the root access?

every rom that I install it always installs successfully, but it always goes into erecovery mode, could anyone help me?

EVA-L09C432B390/B39X update

Today I check in firmware finder and find this new update but it's only FullOta-Mf and Ota-Mf.
All time we must wait for FullOta-Pv-Mf to use dsn to update or use proxy.
I be check this update when they give us FullOta-Pv-Mf and write here how it's work.
Cheers
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

IF they release FullOta-Pv-Mf...

Nate91 said:
IF they release FullOta-Pv-Mf...
Click to expand...
Click to collapse
I think they release. If they don't release its be big shot to knew for them

I was hoping EMUI 5.1 would be the next big update, given it was scheduled for June

retsilred said:
I was hoping EMUI 5.1 would be the next big update, given it was scheduled for June
Click to expand...
Click to collapse
dinkogospodinov' pid='1412980' dateline='1500620192 said:
Emui answer in facebook.
Q: Will my P9 get EMUI 5.1?
A: Hi Dinko, EMUI 5.1 is presently not being offered to devices that are on EMUI 5.0, EMUI 4.1 or lower systems for now. Thank you for your understanding and support.
Click to expand...
Click to collapse
Sent from my EVA-L09 using Tapatalk

I find that answer vague and unconvincing

Whats the patch date in this build?

I think its that same as eva-l19c185b390
I don't check because I don't root my phone

i have already update this version and it almost perfect
battery life improvement and added beauty shortcut on front camera
it is stable for now..

How did you do that? i am on b386

fny said:
i have already update this version and it almost perfect
battery life improvement and added beauty shortcut on front camera
it is stable for now..
Click to expand...
Click to collapse
Please explain how you updated to 390. Which way do you use?

takeoff342 said:
Please explain how you updated to 390. Which way do you use?
Click to expand...
Click to collapse
I guess the only possible is flashing zip through TWRP... But is it worth to risk? Mmmm... I wait
Enviado desde mi EVA-L09 mediante Tapatalk

i upgrade from firmware finder
change dns in network settings
and update via hisuite
follow instruction with firmware finder and dns settings on your network
---------- Post added at 10:03 AM ---------- Previous post was at 09:44 AM ----------
Mendozacge said:
How did you do that? i am on b386
Click to expand...
Click to collapse
just follow instruction vie firmware finder dns beta

I Think you better read the Thread topic. We are here about the C432 Modell and not the 185 Modell that you have.

fny said:
i upgrade from firmware finder
change dns in network settings
and update via hisuite
follow instruction with firmware finder and dns settings on your network
---------- Post added at 10:03 AM ---------- Previous post was at 09:44 AM ----------
just follow instruction vie firmware finder dns beta
Click to expand...
Click to collapse
IF you use dsn and hisute you can use but you must have FullOta-Pv-Mf to flash correct
You use Eva-l09c185b390 and test its FullOta-Pv-Mf
For now we don't have Eva-l09c432b390

I dont see that he test the PV variant. I only see on screenshots that he only have the same MF Variants only. And as he said he can flash it. So maybe it is possible on our 432 modell too

takeoff342 said:
I dont see that he test the PV variant. I only see on screenshots that he only have the same MF Variants only. And as he said he can flash it. So maybe it is possible on our 432 modell too
Click to expand...
Click to collapse
Try and write to us. I try do it with first release b386 and only FullOta-Pv-Mf work for me I cant use FullOta-Mf

I also been using firmware finder, I think it's quite useful, I recently unbranded from being locked to UK EE, and ended up using this app to get me to EVA-L09C432B386 bit of a noob question here but what does PV MF mean?? ALso if you check firmware access it says B390 it's not approved

twics said:
I also been using firmware finder, I think it's quite useful, I recently unbranded from being locked to UK EE, and ended up using this app to get me to EVA-L09C432B386 bit of a noob question here but what does PV MF mean?[emoji848] ALso if you check firmware access it says B390 it's not approved
Click to expand...
Click to collapse
I don't remember where I read what its Pv but I think its Public Version and it's official update. But MF its beta
I try today flash FullOta-Mf using dsn and hi suite and have error when I have 6%. I try flash Ota and have error when I have 5%.

chudy_85 said:
I don't remember where I read what its Pv but I think its Public Version and it's official update. But MF its beta
I try today flash FullOta-Mf using dsn and hi suite and have error when I have 6%. I try flash Ota and have error when I have 5%.
Click to expand...
Click to collapse
Hello
You can test this, of course with your b390 full-ota-mf file.
https://forum.xda-developers.com/showpost.php?p=73194078&postcount=893

Root P20?

Did anyone obtained root yet?
Could it be possible to use an Mate 10 Pro root method or twrp (because of the similiar hardware components)?

Someone would need to test this, but Magisk has had support for the more recent Huawei phones. In best case, you just need to unlock bootloader and then flash Magisk.

Thesinistah86 said:
Did anyone obtained root yet?
Could it be possible to use an Mate 10 Pro root method or twrp (because of the similiar hardware components)?
Click to expand...
Click to collapse
Have you unlocked your boot loader yet ?
---------- Post added at 10:26 AM ---------- Previous post was at 10:25 AM ----------
Thesinistah86 said:
Did anyone obtained root yet?
Could it be possible to use an Mate 10 Pro root method or twrp (because of the similiar hardware components)?
Click to expand...
Click to collapse
Have you unlocked your bootloader yet ?

mchtt said:
Have you unlocked your boot loader yet ?
---------- Post added at 10:26 AM ---------- Previous post was at 10:25 AM ----------
Have you unlocked your bootloader yet ?
Click to expand...
Click to collapse
I only have an demo unit atm, but i will get my device in the next few weeks.
I guess huawei will provide the possibility of unlocking the bootloader, they're very fast with it.
Otherwise it could be working with the 'general unlock code' (fastboot oem unlock UUUUUUUUUUUUUUUU).
I guess bootloader unlocking will be the smallest problem.

mrabcx said:
Someone would need to test this, but Magisk has had support for the more recent Huawei phones. In best case, you just need to unlock bootloader and then flash Magisk.
Click to expand...
Click to collapse
Isn't it mandatory to have an custom recovery to flash magisk? I don't think that the regular recovery will do. That's why i'm asking about the possibility of flashing the mate10pro-twrp. That probably work, but i'm not a pro ?

My P20 Lite is already Bootloader Unlocked, so the 20 and Pro should not be difficult to unlock.

mchtt said:
My P20 Lite is already Bootloader Unlocked, so the 20 and Pro should not be difficult to unlock.
Click to expand...
Click to collapse
Hi, how have you managed unlocking the bootloader ? I've bought a P20 Lite and don't know how to do this

I followed this. If like me you are using a Mac you don't need to install drivers and adb.
http://rootmygalaxy.net/unlock-bootloader-on-huawei-devices/
---------- Post added at 07:47 PM ---------- Previous post was at 07:31 PM ----------
After unlocking it you can access eRecovery !
Do you think eRecovery will be enough to restore in case of failure with a fastboot treble system.img flash ?
I'm so tempted to go AOSP...

mchtt said:
I followed this. If like me you are using a Mac you don't need to install drivers and adb.
http://rootmygalaxy.net/unlock-bootloader-on-huawei-devices/
---------- Post added at 07:47 PM ---------- Previous post was at 07:31 PM ----------
After unlocking it you can access eRecovery !
Do you think eRecovery will be enough to restore in case of failure with a fastboot treble system.img flash ?
I'm so tempted to go AOSP...
Click to expand...
Click to collapse
I would advice until we have twrp that it's not worth the risk just in case.
Sent from my OnePlus 5 using XDA Labs

One can install Magisk without TWRP and flashing ROMs and switching back to stock via adb is also quite feasible. There are plenty of guides on how to do these things in the Mate 10 forums. I guess the process will be quite similar for the P20. Of course, TWRP makes things easier .... but it must first be made available and that can take time.

Mate10 is 8.0
P20 is 8.1
But I think root will be easy if you use magisk

To use magisk we need either a custom recovery or the stock boot image, which I've had no luck on dumping yet. Anyone any ideas?

Magisk works just fine
Twrp does not. But eventually will
https://mega.nz/#!jlBFWSwR!wzozF9Zi189upCm6mCVjTDEUcG9SpDHbNOPewKJ7so8
Don't blame me for sharing it
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my DUK-L09 using Tapatalk

LastStandingDroid said:
Magisk works just fine
Twrp does not. But eventually will
https://mega.nz/#!jlBFWSwR!wzozF9Zi189upCm6mCVjTDEUcG9SpDHbNOPewKJ7so8
Don't blame me for sharing it View attachment 4467520View attachment 4467521
Sent from my DUK-L09 using Tapatalk
Click to expand...
Click to collapse
Thanks man ! What is the partition's name in huawei devices to flash the patched boot img ?

Jb-kun said:
Thanks man ! What is the partition's name in huawei devices to flash the patched boot img ?
Click to expand...
Click to collapse
Fastboot flash ramdisk CLT-L29-MAGISK.img
Sent from my DUK-L09 using Tapatalk
I've created a thread about rootin p20 pro

Mmh I'm afraid you guy has provided a wrong rooting method cause after flashing your image, my P20 has now a bootloop issue :x

LastStandingDroid said:
Magisk works just fine
Twrp does not. But eventually will
https://mega.nz/#!jlBFWSwR!wzozF9Zi189upCm6mCVjTDEUcG9SpDHbNOPewKJ7so8
Don't blame me for sharing it View attachment 4467520View attachment 4467521
Sent from my DUK-L09 using Tapatalk
Click to expand...
Click to collapse
Can you tell us the detail of the process ? And where did you get the stock boot image ?

Jb-kun said:
Mmh I'm afraid you guy has provided a wrong rooting method cause after flashing your image, my P20 has now a bootloop issue :x
Click to expand...
Click to collapse
Did u have CLT-L29?
otonieru said:
Can you tell us the detail of the process ? And where did you get the stock boot image ?
Click to expand...
Click to collapse
There's a firmware released for P20 pro a while ago.
Sent from my DUK-L09 using Tapatalk
---------- Post added at 12:48 PM ---------- Previous post was at 12:07 PM ----------
Oh so you guys have regular p20?
If so I can patch the P20 boot (but it's Al00/Tl00)
Sent from my DUK-L09 using Tapatalk

LastStandingDroid said:
Did u have CLT-L29?
There's a firmware released for P20 pro a while ago.
Sent from my DUK-L09 using Tapatalk
---------- Post added at 12:48 PM ---------- Previous post was at 12:07 PM ----------
Oh so you guys have regular p20?
If so I can patch the P20 boot (but it's Al00/Tl00)
Click to expand...
Click to collapse
Nvm mate,
I managed to patch the ramdisk of P20 Pro L29
Thank you for the offer, but mostly for the info. At least i know for sure that those method still work.

otonieru said:
Nvm mate,
I managed to patch the ramdisk of P20 Pro L29
Thank you for the offer, but mostly for the info. At least i know for sure that those method still work.
Click to expand...
Click to collapse
Please do share your patched boot.
As it will help others
Sent from my DUK-L09 using Tapatalk