YOUR WARRANTY IS NOW VOID. USE IT AT YOUR OWN RISK! I AM NOT RESPONSIBLE FOR ANY DAMAGES OR BRICKS THAT MIGHT HAPPEN UPON FLASHING. YOU HAVE BEEN WARNED!!!
REQUIREMENTS
Flashfile + Drivers + Flashtool:https://www.androidfilehost.com/?fid=24349802275799349
A good working PC that is able to hold battery power for at least 15 minutes in case of any power outages
A good working USB Cable
Internet connection for automatic update of VCOM and Preloader drivers
Of Course Desire 820s with at least 50% battery power
Flashing experience
Confirmed to be working on Desire 820s, ts and ys variants so far. NOT Yet tested on the Desire 820us variant
Please know that you will not be able to install any OTA for this firmware because it is not the original firmware for your device.
REMEMBER This is a full firmware flash and not just a ROM so you MUST know how to revert to your original firmware in case of repairs by warranty.
This Procedure will format your Internal SD Card so please backup before proceeding
HOW TO FLASH WITH SP FLASH TOOL
1. Extract the Downloaded Lollipop Flashfile
2. Install The Drivers Inside *MTK_UsbDriver_autorun_1.0.14_internal.rar*
3. Use The Included Flash tool Click on Scatter-loading by the right
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
4. In the window that pops up, select MT6752_Android_scatter in the Lollipop Flashfile folder
5. A list with ticked boxes should appear in SP flash tool
6. Select Firmware Upgrade***********************VERY IMPORTANT OR YOU WILL BREAK YOUR PHONE*********
7. Click Download
8. Stop should now be prominent while other options should be grayed out
9. Switch off your phone and wait for at least 10 seconds after it has switched off
11. Connect the switched off phone to the PC via USB cable Press the power button once or twice until pc detects the Phone
12. A progress bar should start running
13. DO NOT INTERRUPT. Wait until you get a Success message (green circle with OK)
14. Disconnect USB cable and switch on the phone
CREDITS
nkk71 for decrypting RUU.
Gibz97 For finding the RUU , and all the valuable information he gave to us ,and of course the well designed thread
Screenshots
Mohamed Yaser said:
CREDITS
nkk71 for decrypting RUU.
Gibz97 For finding the RUU , and all the valuable information he gave to us ,and of course the well designed thread.
Click to expand...
Click to collapse
Great work. So you've installed this European Firmware in your 820s. Just curious to know the region of your 820s? And does v5.0.2 has Cast Screen feature? Request you to post a few screenshots of Camera App.
Thank you very much bro :good:
TWRP for WWE version is ready
Gibz97 said:
Thank you very much bro :good:
TWRP for WWE version is ready
Click to expand...
Click to collapse
I have this error? what I must to do to fix this?
Pana03 said:
I have this error? what I must to do to fix this?
Click to expand...
Click to collapse
Hold volume up and volume down when connecting to PC until when it starts to flash
Ok,i will try later.. tnx
PrateekBHT said:
Great work. So you've installed this European Firmware in your 820s. Just curious to know the region of your 820s? And does v5.0.2 has Cast Screen feature? Request you to post a few screenshots of Camera App.
Click to expand...
Click to collapse
mine was HTC_HK version and it went smoooothly , i will upload screens in next post
Here
Gibz97 said:
Thank you very much bro :good:
TWRP for WWE version is ready
Click to expand...
Click to collapse
we have to unlock bl first ,, will it wipe my data ?
Mohamed Yaser said:
we have to unlock bl first ,, will it wipe my data ?
Click to expand...
Click to collapse
Yes it will wipe data. Just try to see if you will be sent the unlock code
Gibz97 said:
Hold volume up and volume down when connecting to PC until when it starts to flash
Click to expand...
Click to collapse
I try now,for now everthing is good,downloading now,i wait to finish,i will post when finish.. Tnx Gibz
Android is upgrading.. nice I will test rom..
Pana03 said:
I try now,for now everthing is good,downloading now,i wait to finish,i will post when finish.. Tnx Gibz
Android is upgrading.. nice I will test rom..
Click to expand...
Click to collapse
Please share a photo of the bootloader
Gibz97 said:
Please share a photo of the bootloader
Click to expand...
Click to collapse
ok bro.. wait little bit..
see bro..
Gibz97 said:
Hold volume up and volume down when connecting to PC until when it starts to flash
Click to expand...
Click to collapse
I did that, and I got this error. Any solution?
Pana03 said:
ok bro.. wait little bit..
see bro..
Click to expand...
Click to collapse
Same story like the Taiwanese Firmware
---------- Post added at 12:06 PM ---------- Previous post was at 11:54 AM ----------
amirarsyad97 said:
I did that, and I got this error. Any solution?
Click to expand...
Click to collapse
Use SP Flash Tool v5.1532.00, the one I uploaded on my thread. Unfortunately it seems like @Mohamed Yaser uploaded the wrong version
Gibz97 said:
Same story like the Taiwanese Firmware
---------- Post added at 12:06 PM ---------- Previous post was at 11:54 AM ----------
Use SP Flash Tool v5.1532.00, the one I uploaded on my thread. Unfortunately it seems like @Mohamed Yaser uploaded the wrong version
Click to expand...
Click to collapse
No , he just broke his partitions as i got in his PM
He must use Kitkat preloader frist
Simply
-Flash kk
-Then flash lp
Gibz97 said:
Use SP Flash Tool v5.1532.00, the one I uploaded on my thread. Unfortunately it seems like @Mohamed Yaser uploaded the wrong version
Click to expand...
Click to collapse
My bad. I'm using v5.1452.00. Problem now fixed. But now the imei and cid still the same as the taiwanese firmware. And I can't unlock bootloader (invalid cid).
I tried to flash twrp using flashtool even the bootloader is locked. But I can't reboot to recovery and software status changed to modified. (that is expected). Surprisingly, I can reboot to recovery after flashing the stock one.
Help Please...
A little noob questions...
1. How to know if my device is us/ys/ts variant?
2. Do i need to unlock the bootloader to flash the rom?
3. How to root KitKat on my Desire 820s without bricking for backing up my IMEI?
goldenevil47 said:
A little noob questions...
1. How to know if my device is us/ys/ts variant?
2. Do i need to unlock the bootloader to flash the rom?
3. How to root KitKat on my Desire 820s without bricking for backing up my IMEI?
Click to expand...
Click to collapse
1. You can see that on the back of you phone,there write like this: ''Model820ts(or ys or us)''
2.I mean no,only follow tutorial and you will flash firmwork easy..
3.I don't know answer for this question..
:good::good::laugh:
---------- Post added at 10:41 AM ---------- Previous post was at 10:39 AM ----------
Gibz97 said:
Same story like the Taiwanese Firmware
---------- Post added at 12:06 PM ---------- Previous post was at 11:54 AM ----------
Use SP Flash Tool v5.1532.00, the one I uploaded on my thread. Unfortunately it seems like @Mohamed Yaser uploaded the wrong version
Click to expand...
Click to collapse
Yeah same story,i try to get code from htcdev.com for unlocking bootloader but I failed..
Related
Hello,
can anybody help me, in need a root for my new Feiteng H9500.
Is this INSTRUCTIONS right for me:
http://forum.xda-developers.com/showthread.php?t=2247537
And is the Feiteng H9500 and the Star N9500 the same Phone ?
Sorry for my bad English
JayJay
I researched they aren't same phones
For root:
1.Download usb driver ----> www.mirrorcreator.com/files/RJDKYXRH/ and open Driver_Auto_Installer_v1.1236.00.rar and run install.bat it install driver automatically
2. Plug your phone to pc
3.Download this file ----> http://www.mirrorcreator.com/files/09XPAELB/ open Motochopper_Auto_Root.rar and run run.bat your phone has root
If i help you please press thanks button :thumbup:
Sent from my MT11i using xda app-developers app
Thanks a lot lagania! I succesfuly rooted my Feiteng H9500 with the files you provided. You are my hero! :good:
im getting my feiteng next week ! I have ordered it with h9500 , cant wait.. how's the device you guys?:victory:
Dou you want install cwm ?
If i help you please press thanks button
Sent from my MT11i using xda app-developers app
yes tell us all about the CWM
I will make the DRX v0.1 firmware on the phone .
JayJayRush said:
yes tell us all about the CWM
I will make the DRX v0.1 firmware on the phone .
Click to expand...
Click to collapse
download CWM Recovery.rar ----->http://www.mirrorcreator.com/files/RJDKYXRH/
open CWM Recovery.rar and extract SP_Flash_Tool_v3.1304.0.119.rar
close the phone and displace battery
plug the phone to pc but don't with battery
run Flash_tool.exe in the SP_Flash_Tool_v3.1304.0.119.rar
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
press scatter-loading button and slect MT6589_Android_scatter_emmc in the CWM Recovery file(first downloaded file) then press open
press dowload button. after press yes button
program start automativally run.it seem like doesn't work but it work.don't close program
after replace battery.computer shows your phone that Mediatek USB VCOM PORT
program start automativally download.
downloading panel will be red and after it will be yellow like image
after after successfuly dowloaded you dispalace battery and replace.open phone continuously pressing volume + button. cwm screen will come
sorry for english i don't know very well i hope i can help you:good:
New rom on needrom
@ lagania
this is the wrong link for CWM
JayJayRush said:
@ lagania
this is the wrong link for CWM
Click to expand...
Click to collapse
i can downloaded and added box ----> https://www.box.com/s/ycxz84ags2e1m2q5l7xz :good:
sorry sorry true link ---->https://www.box.com/s/rspgiei9lzwdqpi66xl4
Has anyone got problem with autofocus on the Feiteng h9500?
I know it's a bit off-topic but I could not find any other thread about this phone. sorry
AzzMG said:
Has anyone got problem with autofocus on the Feiteng h9500?
I know it's a bit off-topic but I could not find any other thread about this phone. sorry
Click to expand...
Click to collapse
I don't know and haven't got h9500. But you try clear camera data. Go to settings-->apps-->all-->camera-->clear data maybe it will fix
Sent from my MT11i using xda app-developers app
AzzMG said:
Has anyone got problem with autofocus on the Feiteng h9500?
I know it's a bit off-topic but I could not find any other thread about this phone. sorry
Click to expand...
Click to collapse
not really mine is working fine
lagania said:
i can downloaded and added box ----> https://www.box.com/s/ycxz84ags2e1m2q5l7xz :good:
sorry sorry true link ---->https://www.box.com/s/rspgiei9lzwdqpi66xl4
Click to expand...
Click to collapse
dude thank you so much :highfive::good:
---------- Post added at 10:33 PM ---------- Previous post was at 10:21 PM ----------
anyone else's playstore stopped working ?
---------- Post added at 10:34 PM ---------- Previous post was at 10:33 PM ----------
PS : making backup of the original rooted system so people have a ROM To restore to if needed ! :angel:
Someone please help!!!
I ****ed up my play store, please help
can someone give me a backup of their ROM/playstore+play services?
please
kind regards
---------- Post added 26th May 2013 at 12:23 AM ---------- Previous post was 25th May 2013 at 11:40 PM ----------
yay reached 300 post!
anyways ..
here is if you ever mess up your device (DIRECT DOWNLOAD) READ INSTRUCTIONS BELOW
1. open the rom flash tool after extracting the ROM
2. select the scatter-download the .txt file
3.after this take out the battery of your phone
4. connect the usb in your laptop but NOT the phone yet
5. click "firmware > upgrade"
6. NOW connect your phone after 2-5 seconds after clicking "firmware > upgrade"
7. it now should start loading the bar, if not click stop and take out the USB of your phone and click firmware > upgrade and wait 10 seconds
8. if everything worked now the bar should be loading
9. after its all done it shows a green circle
10. DONE !
This rom already has CWM + is already rooted
lagania said:
I don't know and haven't got h9500. But you try clear camera data. Go to settings-->apps-->all-->camera-->clear data maybe it will fix
Sent from my MT11i using xda app-developers app
Click to expand...
Click to collapse
Sorry for my late reply. Just got a new h9500 but it's the same problem on that one.
So far I have 1 white with working focus and 3 (yes three) grey with a nonworking focus....
Thanks for your suggestion but I can't find any program that seems to have something to do with the camera in the list
AzzMG said:
Sorry for my late reply. Just got a new h9500 but it's the same problem on that one.
So far I have 1 white with working focus and 3 (yes three) grey with a nonworking focus....
Thanks for your suggestion but I can't find any program that seems to have something to do with the camera in the list
Click to expand...
Click to collapse
all that i received worked fine ?
AzzMG said:
Sorry for my late reply. Just got a new h9500 but it's the same problem on that one.
So far I have 1 white with working focus and 3 (yes three) grey with a nonworking focus....
Thanks for your suggestion but I can't find any program that seems to have something to do with the camera in the list
Click to expand...
Click to collapse
I have a grey color set and the auto-focus does not seem to be working as well. Did you manage to get any fix for it? Seems like a definite software problem because the camera takes photos fine..
PauseZ said:
I have a grey color set and the auto-focus does not seem to be working as well. Did you manage to get any fix for it? Seems like a definite software problem because the camera takes photos fine..
Click to expand...
Click to collapse
I have none working solutions so far. I'm unsure about a software issue. They all have the same firmwares.
I will inform you if i find out anythin
AzzMG said:
I have none working solutions so far. I'm unsure about a software issue. They all have the same firmwares.
I will inform you if i find out anythin
Click to expand...
Click to collapse
screen cap from my phone. No matter which part of the screen i click the focus is like that.. is the issue similar?
Main thread + features + install instructions + dev support
http://forum.xda-developers.com/showthread.php?t=2201860
PhilZ Touch is a CWM Advanced Edition that adds all the features you could ever miss in CWM
It is a well proven recovery for many phones
It also adds a full touch interface a completely configurable GUI
Please give your feedback, what works, and any bug you could encounter
Read the features, and check if you are missing something
To take a screen shot, just slide left
Also, do not forget to read about the powerful aroma file manager integration and double tap shortcut
Download links
Last version can be found here:
i9001 (ariesve)
http://goo.im/devs/philz_touch/CWM_Advanced_Edition
Click to expand...
Click to collapse
Huge thanks to @alireza7991 for providing device sources
Wow ! this is huge thanks !!
Great ! Thanks
LoL
Hope it works
Still waiting for some one to boot it and give feedback
Do not forget that I do not own the phone. So, describe exactly an eventual issue + provide logs
Awesome !!! Thank you for supporting our device !!!
Sent from my GT-I9001 using xda app-developers app
I've just tested flashing and changing various settings. Everything works fine.
Also shared on SNS from my signature.
Regards,
ZordanKV
ZordanKV said:
I've just tested flashing and changing various settings. Everything works fine.
Also shared on SNS from my signature.
Regards,
ZordanKV
Click to expand...
Click to collapse
Do you need to reboot recovery to prevent restart??? Thanks in advance...
Phil3759 said:
Main thread + features + install instructions + dev support
Click to expand...
Click to collapse
I get impressed by your GUI....will try in the next day :good::good:
Is this CWM patched for the 3.0 safe kernel???
DreamerTKM said:
Do you need to reboot recovery to prevent restart??? Thanks in advance...
I get impressed by your GUI....will try in the next day :good::good:
Is this CWM patched for the 3.0 safe kernel???
Click to expand...
Click to collapse
I use a prebuilt safe kernel
Ok. thanks and I've flashed your recovery....till now very satisfied with it using the cm9 rom. Thanks again....
btw I'll check for the reboot issue and I hope it is not there as this issue made me stay at cwm 5.5.0.4 till today~
Sent from my GT-I9001 using XDA Premium 4 mobile app
Awesome, im downloading it right now!
Will also test for sudden reboot Just perform a backup and see
@ philz what is the base of this CWM version? V5 or V6
---------- Post added at 08:39 PM ---------- Previous post was at 08:13 PM ----------
warning:
Sudden reboot is also present in this recovery!!
To prevent it:
- reboot from rom into recovery
- reboot recovery via 3bc and reboot recovery again
- use adb reboot recovery
---------- Post added at 08:42 PM ---------- Previous post was at 08:39 PM ----------
Also;
screenshots you made look like this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
(i did not change any setting)
mrjraider said:
what is the base of this CWM version? V5 or V6
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2201860 topic describes that it is number 6.
mrjraider said:
Awesome, im downloading it right now!
Will also test for sudden reboot Just perform a backup and see
@ philz what is the base of this CWM version? V5 or V6
---------- Post added at 08:39 PM ---------- Previous post was at 08:13 PM ----------
warning:
Sudden reboot is also present in this recovery!!
To prevent it:
- reboot from rom into recovery
- reboot recovery via 3bc and reboot recovery again
- use adb reboot recovery
---------- Post added at 08:42 PM ---------- Previous post was at 08:39 PM ----------
Also;
screenshots you made look like this:
(i did not change any setting)
Click to expand...
Click to collapse
At least you have a working screen shot
Many new devices do not support fb2png sadly
So, I consider it good
Sudden reboot? Is this a syndrome affecting your phone? Maybe kernel related
I can try to repack around a stock kernel if someone uploads a recent stock recovery.img
Phil3759 said:
At least you have a working screen shot
Many new devices do not support fb2png sadly
So, I consider it good
Sudden reboot? Is this a syndrome affecting your phone? Maybe kernel related
I can try to repack around a stock kernel if someone uploads a recent stock recovery.img
Click to expand...
Click to collapse
Problem happens with CWM versions above 5.5.0.4.
Also with twrp above 2.2.1.
Many have tried to fix this but did not succeed i guess.
Stock kernel? The one from stock sammy rom 2.3.6?
mrjraider said:
warning:
Sudden reboot is also present in this recovery!!
To prevent it:
- reboot from rom into recovery
- reboot recovery via 3bc and reboot recovery again
- use adb reboot recovery
Click to expand...
Click to collapse
3bc means three button combination?
And i have to do all reboots at once?
kRYySTy said:
3bc means three button combination?
And i have to do all reboots at once?
Click to expand...
Click to collapse
No just one of these...
mrjraider said:
Problem happens with CWM versions above 5.5.0.4.
Also with twrp above 2.2.1.
Many have tried to fix this but did not succeed i guess.
Stock kernel? The one from stock sammy rom 2.3.6?
Click to expand...
Click to collapse
yes, exactly
Unless someone already tried it
I dunno but here is the boot.img from the latest XEN ROM
mrjraider said:
I dunno but here is the boot.img from the latest XEN ROM
Click to expand...
Click to collapse
I need recovery.img
Phil3759 said:
I need recovery.img
Click to expand...
Click to collapse
Whoops.. Sorry...
Here:
tested . nice
some tips/notes/bugs :
1- a delay ( 2-3 sec sleep ) while reading about menu could be good since it closes log window as soon as printing about finishes ( 0.1 sec or less )
2- reverting to stock background from a soild background not working ( seems that originial background has been removed from /res !)
3- lib/modules/dhd.ko not needed . could free ~400-500 Kb on ramdisk
4- about fb2png , would'nt be better if you use bmp-565 ? it seems a unsupported framebuffer problem , you should use rgbx-8888 and default functions from graphics.c to fix this
5- background png does not have good quality . a more simple one could be better
thanks for you effort
all the best
Alireza
:laugh:Hello Frns/GT-S7582 Users, Root your Samsung Galaxy S Duos 2 via Pre-Rooted firmware!!!:laugh:
I DECIDED TO PRE-ROOT THE FIRMWARE BECAUSE, MANY OF THEM INFORMED ME THAT KINGO AND VROOT APPS ARE MALWARE!!!
AND A WORD OF ADVISE DON'T USE VROOT OR KINGO,..
DOWNLOAD LINKS:
PRE-ROOTED FIRMWARE(NOT THE LATEST ONE):
pre_rooted_GT-S7582.7z.001
pre_rooted_GT-S7582.7z.002
pre_rooted_GT-S7582.7z.003
pre_rooted_GT-S7582.7z.004
pre_rooted_GT-S7582.7z.005
pre_rooted_GT-S7582.7z.006
PRE-ROOTED-DEODEXED-FRIMWARE:
pre_deodexed_system.7z.001
pre_deodexed_system.7z.002
pre_deodexed_system.7z.003
pre_deodexed_system.7z.004
pre_deodexed_system.7z.005
pre_deodexed_system.7z.006
PRE-ROOTED-LATEST FIRMWARE:
latest_pre_rooted_system.7z.001
latest_pre_rooted_system.7z.002
latest_pre_rooted_system.7z.003
latest_pre_rooted_system.7z.004
latest_pre_rooted_system.7z.005
latest_pre_rooted_system.7z.006
PROCEDURE:1). INSTALL 7ZIP LATEST SOFTWARE ON TO YOUR PC.
2). DOWNLOAD THE ABOVE FILES AND PLACE THEM ALL IN ONE FOLDER ON YOUR PC.
3). RIGHT CLICK ON pre_rooted_GT-S7582.7z AND SELECT 7ZIP.
4). THEN SELECT OPTION "EXTRACT HERE" NOW YOU WILL GET THIS ONE FILE NAMED pre_rooted_GT-S7582.tar .
5). DOWNLOAD ODIN ANY VERSION AND OPEN THE ODIN,EXE.
6).THEN SELECT PDA, BROWSE FOR pre_rooted_GT-S7582.tar FILE AND SELECT IT.
ENTERING DOWNLOAD MODE:
1). SWITCH OFF YOUR MOBILE, AND PRESS VOLUME DOWN+HOME KEY+POWER KEY ALL AT ONCE AND WAIT FOR DOWNLOAD MODE TO COME.
2). PRESS VOLUME UP KEY TO CONTINUE INTO DOWNLOAD MODE.
FLASHING THE FIRMWARE FILE:
1). NOW CONNECT YOUR MOBILE TO PC VIA USB CABLE.
2). THEN PRESS START IN ODIN, THEN LET ODIN DO ITS JOB.
3). YOUR MOBILE WILL REBOOT AFTER FLASHING COMPLETED BY ODIN.
4). FINALLY CHECK FOR, SUPERUSER.APK, AND YOUR MOBILE IS ROOTED :good:
FOR CLEAR AND PICTORIAL TUT GO HERE
IMAGES:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CREDITS:1). CHAINFIRE FOR SUPERSU.
2). TO ME FOR MAKING THIS PRE ROOTED FIRMWARE.
can u make a prerooted deodexed rom.
Sarath280 said:
can u make a prerooted deodexed rom.
Click to expand...
Click to collapse
yeah I can but I need some time..
rahul964 said:
Here, is the new tutorial I have created using your Pre-rooted firmware: http://androidxda.com/root-galaxy-s-duos-2-gt-s7582
Please, share it if you like.
Click to expand...
Click to collapse
nice guide I dint have time to do all those... good you can share that :good:
@Chirtagh
Hi Chirtagh,
I've got an s7582 on the way and want to root but have some queries. I saw your previous posts in the other s7582 thread and was wondering about your rooting method. Did you root your pre-rooted firmware with kingo or vroot? If so, I think this raises the question as to whether or not it is malware susceptible.
Can you please post your rooting method?
Regards
Keliuss
keliuss said:
@Chirtagh
Hi Chirtagh,
I've got an s7582 on the way and want to root but have some queries. I saw your previous posts in the other s7582 thread and was wondering about your rooting method. Did you root your pre-rooted firmware with kingo or vroot? If so, I think this raises the question as to whether or not it is malware susceptible.
Can you please post your rooting method?
Regards
Keliuss
Click to expand...
Click to collapse
No I din't use any of those..
I simply used my automated script to unpack and repack the system.img available in the firmware package..
you can check my signature for auto-preroot script...
if you hav linux os preferably Ubuntu follow the method you will see for yourself. . :good:
And one more thing, pre rooting the firmware using kingo and vroot not possible at all...
Good job bro....But write Galaxy S duos 2 insted of Galaxy star duos 2. Some peeps might confuse.
bhattbhargav60 said:
Good job bro....But write Galaxy S duos 2 insted of Galaxy star duos 2. Some peeps might confuse.
Click to expand...
Click to collapse
Thanks for the info... :good:
i dint notice that.. changed it..
CWM for Galaxy S DUOS 2!
is der any hope of CWM for S DUOS 2(S7582) ?
mikejax said:
is der any hope of CWM for S DUOS 2(S7582) ?
Click to expand...
Click to collapse
I am not good in CWM , and even if I wanted to build CWM ..
My pc does not meet the minimum requirements. .
So need to wait for some one to do it..
I will build a cwm
I am going to build cwm just I need a small thing can any one give the recovery. Img
and I will build a one
THE CWM IS READY here http://forum.xda-developers.com/showthread.php?p=50559634
---------- Post added at 02:20 PM ---------- Previous post was at 02:18 PM ----------
Big thanks for your great work. :good:
ahmedhameed said:
I am going to build cwm just I need a small thing can any one give the recovery. Img
and I will build a one
---------- Post added at 02:20 PM ---------- Previous post was at 02:18 PM ----------
Big thanks for your great work. :good:
Click to expand...
Click to collapse
Here's the recovery you asked for: Recovery.img
Made another six step tutorial for esy rooting S DUOS 2 ROOT QUICK & EASY
is there any custom rom for s duos 2...? ....plz develop 4.4 kitkat!
ahmedhameed said:
I am going to build cwm just I need a small thing can any one give the recovery. Img
and I will build a one
---------- Post added at 02:20 PM ---------- Previous post was at 02:18 PM ----------
Big thanks for your great work. :good:
Click to expand...
Click to collapse
Any news cwm??
custom rom
is there any way to build 4.4 custom rom like cianogenmod
pchenna143 said:
is there any way to build 4.4 custom rom like cianogenmod
Click to expand...
Click to collapse
Nope not any...
Waiting for CWM..
It is possible to get Android 4.4 for our device but we need samsung to introduce a device cimilar to ours with android 4.4.2 as standard & then use that rom to build as base for ours. one more thing DON'T EVEN THINK ABOUT USING VROOT OR KLINGO : THEY ARE CERTIFIED MALWARE .
ahmedhameed said:
I am going to build cwm just I need a small thing can any one give the recovery. Img
and I will build a one
---------- Post added at 02:20 PM ---------- Previous post was at 02:18 PM ----------
Big thanks for your great work. :good:
Click to expand...
Click to collapse
Hey bro..
is it completed or not? yet?
how to back up my stock firmware? help guys so i can follow the steps in the op after backup
So, me and my friend found a way to flash any custom ROM in Huawei G610-U20.
Requirements:
1-First thing do a backup of your NVRAM with the help of MTK Droid tool because you gonna need it.
2-Then install the Update.app file to your phone by local update on About>System updates. Just put DLOAD folder with UPDATE.APP in the ROOT of your SDCARD.
Link to the Update.app ( https://docs.google.com/file/d/0B_okuOocb8wbbkxLODlwVzBESms/edit )
3- After update your phone will reboot, then delete the previous Dload folder.
4- Then download the stock recovery remover by same exact process you did in step 2.
download the stock recovery remover ( https://disk.yandex.com/public/?hash=HOIuITRRhu8BpVnpxv2DGvBCO+NxYh9su2mudSghoVw= )
Extract it and put in the root of your SDcard.
after the recovery remover, your phone will reboot when it will turn on root your phone first with SRS Root tool (Search it on Google)
5- Download the CWMR from here ( http://www.mediafire.com/download/ptsp31ti9kz8bqj/recovery.img ) ,then install MKTmobileUncle tool from playstore or download apk on phone, and then open the app and install recovery from mobileuncletool.
NOW YOU HAVE CWM RECOVERY ON YOUR PHONE
Now you can Flash Any ROM from here (http://www.needrom.com/phone-roms/huawei/serial-g/g610/)
Just download and install in CWM , well i know you all know how to flash a ROM i don't have you explain you.
And Last thing when you flash any ROM you'll get invalid IMEI , but don't panic because we have a solution.
Just attach your phone with your PC and turn USB debugging and install drivers (MT65xx Phone Drivers you can find it on internet, make sure your're using windows 7 because its drivers are incompatible with windows 8 and 8.1) and then Mkt Droid tool it will recognize your phone then press the ROOT button and then wait for a min then Press IMEI/NVRAM and then press restore and give the location of your previously backup of NVRAM it'll ask for two files after flashing just reboot and Enjoy
HIT THE THANKS BUTTONS
For CyanogenMod
Download from the link below.
Do a NVRM backup before flashing and after flashing restore your backup do reply me ASAP whats working or not .
Hit a Thanks button for me.
Link:
https://docs.google.com/file/d/0B-6R...T1E/edit?pli=1
This method will work on any built no
Feel free to flash a ROM!
Just Do a backup of NVRAM first.
usamaash said:
This method will work on any built no
Feel free to flash a ROM!
Just Do a backup of NVRAM first.
Click to expand...
Click to collapse
Are you sure? Does it work on Huawei G610 u20? I think it will bootloop.
gwellplayed said:
Are you sure? Does it work on Huawei G610 u20? I think it will bootloop.
Click to expand...
Click to collapse
I also think it will bootloop on Huawei G610-u20. Someone please try it and say if it works!!!
projectdood said:
I also think it will bootloop on Huawei G610-u20. Someone please try it and say if it works!!!
Click to expand...
Click to collapse
Lol. I thought, it will work? @@ you haven't tried it?
gwellplayed said:
Lol. I thought, it will work? @@ you haven't tried it?
Click to expand...
Click to collapse
I haven't tried it yet because I'm scared of bootlooping my phone again. Can you please try it?? If it works please say it to me
Trust me it will work
Trust me man it'll work just do a backup of NVRAM first
Hit the thanks button
I'll Post about cyanogenmod 4.4 too
usamaash said:
Trust me man it'll work just do a backup of NVRAM first
Hit the thanks button
I'll Post about cyanogenmod 4.4 too
Click to expand...
Click to collapse
There is a cyanogenmod based off android 4.4 compatible to huawei g610-u20??
i'm making one for it
usamaash said:
i'm making one for it
Click to expand...
Click to collapse
Can you please show a video-guide on flashing the custom recovery for huawei g610-u20 it would be greatly appreciated!!
Just follow the instructions Man, trust me once it'll work.
I don't have camera right know :/ I'll help you on every single step
Some Screen Shot form Xperia C ROM on g610-u20
Screen Shots
usamaash said:
Just follow the instructions Man, trust me once it'll work.
I don't have camera right know :/ I'll help you on every single step
Click to expand...
Click to collapse
All I'll try it but maybe tomorrow my mom and dad is here and I can't use our pc when they're here:angel:
---------- Post added at 10:04 AM ---------- Previous post was at 10:01 AM ----------
I'll just download required files today
---------- Post added at 10:23 AM ---------- Previous post was at 10:04 AM ----------
usamaash one more thing, will every rom for Huawei-G610- regardless of region number, (u15,u00) will work for my g610-u20 phone?? Everything posted on the link you provided me works on my phone??
Yeah it'll work I have tested MIUI , Xperia C myself
usamaash said:
Yeah it'll work I have tested MIUI , Xperia C myself
Click to expand...
Click to collapse
I really want to try it. But how can I backup the nvram?
Hi!
My phone is Huawei G610-u20.
I'm gonna try this also! Just to confirm, is it the IMEI Backup Restore (MTK) same as NVRAM?
EDIT UPDATE:
My phone was not rooted for using SRS Root Tool, though I have tried Kingo Root and it worked!
Take note that it's "MTK" not "MKT".
Anyway do you have a link for updated ROMs for Xperia C? Thanks for the tutorials!
It worked! Here's a proof from my Huawei G610-u20 phone.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
My only concern for now is the lack of Google Play Store and other apps like Movies is not stable.
Will be reverting for now to the original Huawei.
Rayster said:
It worked! Here's a proof from my Huawei G610-u20 phone.
My only concern for now is the lack of Google Play Store and other apps like Movies is not stable.
Will be reverting for now to the original Huawei.
Click to expand...
Click to collapse
Man just flash the GAPPS for 4.2.2 Google Play wil work ;D And also try the ASOP ROM
Rayster said:
Hi!
My phone is Huawei G610-u20.
I'm gonna try this also! Just to confirm, is it the IMEI Backup Restore (MTK) same as NVRAM?
EDIT UPDATE:
My phone was not rooted for using SRS Root Tool, though I have tried Kingo Root and it worked!
Take note that it's "MTK" not "MKT".
Anyway do you have a link for updated ROMs for Xperia C? Thanks for the tutorials!
Click to expand...
Click to collapse
Search it on Needrom And after flashing also flash the gapps for 4.2.2.
It will work like ha charm
HIT THE THANKS BUTTON!!
So Guys I Am Presenting Philz Recovery
STEPS TO INSTALL Through Tab
First Root Your Tablet Through Kingroot App
Download Flashify App
Open It And Grant Root Access
Select Flash Recovery Option
Choose recovery.img File
Wait For It To Be Flashed :laugh:
Downloads-Recovery.img
KingoRoot did manage to root it, however I note that the brightness levels are not good, any ideas ?
Any ROM which I can flash with it?
Recently I purchased this tab and I want to know if it's possible to unroot it if I want to claim warranty. I bought it for my kids and want to remove unnecessary apps and make the device fast.
And I hope I have made the right choice in selecting this tab. Can users of this tab share your experiences apart from providing the method to unroot it ?.
Don't know when these guys are going to follow Huawei in allowing customers to root the device.
Yes,you can
jinvidia said:
Recently I purchased this tab and I want to know if it's possible to unroot it if I want to claim warranty. I bought it for my kids and want to remove unnecessary apps and make the device fast.
And I hope I have made the right choice in selecting this tab. Can users of this tab share your experiences apart from providing the method to unroot it ?.
Don't know when these guys are going to follow Huawei in allowing customers to root the device.
Click to expand...
Click to collapse
I also got this tab as my mom gifted me. I rooted it three times and installed xposed twice. Once to renable i flashed the stock rom,but the second time i just deleted record of rooting and unrooted it. The logs can be deleted by using many tools. Currently, I am using xposed. When i would want to unroot, I will just delete the log and unroot it the warranty will be reenabled.
Please tell me how to delete the logs and unroot it. I want to delete the crapware in the tab. Thanks
Rajaryanvishwakarma10 said:
I also got this tab as my mom gifted me. I rooted it three times and installed xposed twice. Once to renable i flashed the stock rom,but the second time i just deleted record of rooting and unrooted it. The logs can be deleted by using many tools. Currently, I am using xposed. When i would want to unroot, I will just delete the log and unroot it the warranty will be reenabled.
Click to expand...
Click to collapse
jinvidia said:
Please tell me how to delete the logs and unroot it. I want to delete the crapware in the tab. Thanks
Click to expand...
Click to collapse
Yes, please tell![emoji120]
Why there is no reply from you ?.Kindly tell how to root and unroot this tab. Thanks
chaubeyprateek said:
So Guys I Am Presenting Philz Recovery
STEPS TO INSTALL Through Tab
First Root Your Tablet Through Kingroot App
Download Flashify App
Open It And Grant Root Access
Select Flash Recovery Option
Choose recovery.img File
Wait For It To Be Flashed :laugh:
Downloads-Recovery.img
Click to expand...
Click to collapse
Is it really sfe to installl??
---------- Post added at 05:50 AM ---------- Previous post was at 05:46 AM ----------
jinvidia said:
Recently I purchased this tab and I want to know if it's possible to unroot it if I want to claim warranty. I bought it for my kids and want to remove unnecessary apps and make the device fast.
And I hope I have made the right choice in selecting this tab. Can users of this tab share your experiences apart from providing the method to unroot it ?.
Don't know when these guys are going to follow Huawei in allowing customers to root the device.
Click to expand...
Click to collapse
Hey there would you lir to install lollipop in your tab
Ibbi 786 povided us a link to do that which can be found in
http://forum.xda-developers.com/android/development/5-0-stock-lp-micromax-p480-t3398406
Please hit thanks to him for his hardwork
Rajaryanvishwakarma10 said:
Is it really sfe to installl??
---------- Post added at 05:50 AM ---------- Previous post was at 05:46 AM ----------
Hey there would you lir to install lollipop in your tab
Ibbi 786 povided us a link to do that which can be found in
http://forum.xda-developers.com/android/development/5-0-stock-lp-micromax-p480-t3398406
Please hit thanks to him for his hardwork
Click to expand...
Click to collapse
Thanks for mentioning I have installed it and yes, it is safe but touch does not work and instead it acts weird!
jinvidia said:
Why there is no reply from you ?.Kindly tell how to root and unroot this tab. Thanks
Click to expand...
Click to collapse
Install universal unroot from this link to unroot completely
https://play.google.com/store/apps/details?id=com.universal.unroot
---------- Post added at 07:01 AM ---------- Previous post was at 06:58 AM ----------
Ibbi786 said:
Thanks for mentioning I have installed it and yes, it is safe but touch does not work and instead it acts weird!
Click to expand...
Click to collapse
You have installed cwm recoveryy??
Rajaryanvishwakarma10 said:
Install universal unroot from this link to unroot completely
https://play.google.com/store/apps/details?id=com.universal.unroot
---------- Post added at 07:01 AM ---------- Previous post was at 06:58 AM ----------
You have installed cwm recoveryy??
Click to expand...
Click to collapse
Yes.
chaubeyprateek said:
So Guys I Am Presenting Philz Recovery
STEPS TO INSTALL Through Tab
First Root Your Tablet Through Kingroot App
Download Flashify App
Open It And Grant Root Access
Select Flash Recovery Option
Choose recovery.img File
Wait For It To Be Flashed :laugh:
Downloads-Recovery.img
Click to expand...
Click to collapse
Getting an error message saying fir couldnot be loaded what to do?
Rajaryanvishwakarma10 said:
Getting an error message saying fir couldnot be loaded what to do?
Click to expand...
Click to collapse
I had installed it on KitKat never tried on Lollipop!
May be it requires an update for working in lollipop
Sent from my GT-P3100 using Tapatalk
jinvidia said:
May be it requires an update for working in lollipop
Sent from my GT-P3100 using Tapatalk
Click to expand...
Click to collapse
Now its working but i wanna adk You a question if the recovery downloading had something wrong due to this the recovery IMG got currupt and flashed that then would the phone boot??
Rajaryanvishwakarma10 said:
Now its working but i wanna adk You a question if the recovery downloading had something wrong due to this the recovery IMG got currupt and flashed that then would the phone boot??
Click to expand...
Click to collapse
I guess it would until you boot into recovery mode I can't say anything!
Ibbi786 said:
I guess it would until you boot into recovery mode I can't say anything!
Click to expand...
Click to collapse
hey ibbi can you send me a pic of you at the email I shared with you
Rajaryanvishwakarma10 said:
hey ibbi can you send me a pic of you at the email I shared with you
Click to expand...
Click to collapse
What?
---------- Post added at 03:11 PM ---------- Previous post was at 03:09 PM ----------
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
this? I made it on my own so please don't use it anywhere.
Ibbi786 said:
What?
---------- Post added at 03:11 PM ---------- Previous post was at 03:09 PM ----------
this? I made it on my own so please don't use it anywhere.
Click to expand...
Click to collapse
I meant to be in contact with some amazing senior members
---------- Post added at 10:57 AM ---------- Previous post was at 10:10 AM ----------
Ibbi786 said:
I had installed it on KitKat never tried on Lollipop!
Click to expand...
Click to collapse
HEY you currently have lollipop na then please install the recovery on that
---------- Post added at 10:59 AM ---------- Previous post was at 10:57 AM ----------
Ibbi786 said:
I guess it would until you boot into recovery mode I can't say anything!
Click to expand...
Click to collapse
and yes the tab would boot even the file was not flashed currectly
Or anything got wrong